| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] xen networking on Debian with 2 nics
Try next kind of vif-line:
vif = [ 'mac=AA:00:00:07:C5:2C,bridge=xen-br0',
'mac=AA:00:00:07:C5:2D,bridge=xen-br1' ]
--
Pasi Tiittanen
Ian fraser wrote:
Hello
all,
Please can someone offer a suggestion, or if I have misunderstood
something vital, point me in the right direction for what I wish to
achieve.
I installed Debian 3.1, installed Xen and all relevant packages using
aptitude (I had to use an unstable repository).
The box has 2 nics, one connected to my internal network and one
connected to my adsl router as I intend to use this box to host my
firewall, vpn and web server Linux boxes as virtual machines.
Dom0's /etc/network/interfaces:
----------------------------------------
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
auto eth1
iface eth1 inet manual
up ifconfig $IFACE 0.0.0.0 up
up ip link set $IFACE promisc on
down ip link set $IFACE promisc off
down ifconfig $IFACE down
----------------------------------------
So I need 2 bridges (so I can get my vpn & firewall machines to
allow the right traffic in/out of our network).
So I run
/etc/xen/scripts/network start bridge=xen-br1 netdev=eth1 antispoof=no
Right?
When I run tcpdump on each of the bridge interfaces I see the expected
traffic for that interface.
Set up a VM with 2 nics with the following config file:
----------------------------------------
kernel = "/boot/vmlinuz-2.6-xenU-tun"
memory = 64
name = "vpn"
nics=2
root = "/dev/hda1 ro"
disk = [ 'phy:/dev/vg00/vpn,hda1,w', 'phy:/dev/vg00/vpnswap,hda2,w' ]
vif = [ 'mac=AA:00:00:07:C5:2C', 'bridge=xen-br0',
'mac=AA:00:00:07:C5:2D', 'bridge=xen-br1' ]
----------------------------------------
I start the VM up and ipconfig in the VM shows
----------------------------------------
eth0 Link encap:Ethernet HWaddr AA:00:00:07:C5:2C
inet addr:192.168.0.230 Bcast:192.168.0.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:858 errors:0 dropped:0 overruns:0 frame:0
TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:76754 (74.9 KiB) TX bytes:158 (158.0 b)
eth1 Link encap:Ethernet HWaddr AA:00:00:01:D2:48
inet addr:192.168.101.1 Bcast:192.168.101.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:861 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:76912 (75.1 KiB) TX bytes:0 (0.0 b)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
----------------------------------------
Which shows a different mac address to the one I am expecting for eth1
as per the config file!! Is this the root of my problem?
So "brctl show" in Dom0 shows:
----------------------------------------
bridge name bridge id STP enabled interfaces
xen-br0 8000.0008a1349cdc no eth0
vif1.0
vif1.1
vif1.2
xen-br1 8000.0008a1349c9f no eth1
vif1.3
----------------------------------------
Which I think is ok! Can anyone confirm?
When in the VM I do a tcpdump on each of the 2 nics I see the same
traffic as if both interfaces are bridged with eth0 in Dom0, this is
not what I want.
I have attempted reinstalling Dom0 from scratch twice and have tried
building xen-testing from source but I get the same outcome. At this
point I am willing to try almost anything (with the exception of
running out and buying more hardware.)
I attempted to look for relevant posts to this mailing list, but
unfortunately I haven't found anything that appears relevant to my
problem. If I have missed stuff please don t flame :)
Any help would be most appreciated.
Regards
Ian
--------------------------------------------------------------------------------
The information in this message and any attachment is intended for the
addressee and is confidential. If you are not that addressee, no action
should be taken in reliance on the information and you should please
reply to this message immediately to inform us of incorrect receipt and
destroy this message and any attachments.
For the purposes of internet level email security incoming and outgoing
emails may be read by personnel other than the named recipient or
sender.
Whilst all reasonable efforts are made, ASM (UK) Ltd cannot guarantee
that emails and attachments are virus free or compatible with your
systems. You should make your own checks and ASM (UK) Ltd does not
accept liability in respect of viruses or computer problems
experienced.
--------------------------------------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home