When I flame up a domU I get the following pannic.
Unable to handle kernel paging request at virtual address c54b4000
printing eip:
c0147ff3
*pde = ma 01413067 pa 00013067
*pte = ma 00000000 pa 55555000
[<c0146503>] pte_alloc_map+0x128/0x151(XEN) Domain 0 shutdown:
I have tried searching the list archive but not had much luck finding
any problem descriptions that seem related to this.
Any help would be appreciated.
I have one system that runs fine. it is a single processor system on a
generic motherboard.
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
stepping : 9
cpu MHz : 2813.582
cache size : 512 KB
fdiv_bug : no
hlt_bug : yes
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36
clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr
bogomips : 5622.98
the second that is crashing is a Tyan Tomcat. The CPU supports
hyperthreading, but not that shows in cpuinfo.
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 3.00GHz
stepping : 9
cpu MHz : 3006.895
cache size : 512 KB
fdiv_bug : no
hlt_bug : yes
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36
clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr
bogomips : 6003.09
Here is my Xen and Linux boot log for those who care.
AT^MAT^MESC[5nESC[5n __ __ ____ ___ _____
\ \/ /___ _ __ |___ \ / _ \|___ |
\ // _ \ '_ \ __) || | | | / /
/ \ __/ | | | / __/ | |_| | / /
/_/\_\___|_| |_| |_____(_)___(_)_/
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 2.0.7 (root@xxxxxxxxxxxxxx) (gcc version 3.4.3 20050227
(Red Hat 3.4.3-22.fc3)) Wed Sep 7 12:15:54 EDT 2005
Latest ChangeSet:
(XEN) Physical RAM map:
(XEN) 0000000000000000 - 000000000009f800 (usable)
(XEN) 000000000009f800 - 00000000000a0000 (reserved)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000003fff0000 (usable)
(XEN) 000000003fff0000 - 000000003fff3000 (ACPI NVS)
(XEN) 000000003fff3000 - 0000000040000000 (ACPI data)
(XEN) 00000000fec00000 - 0000000100000000 (reserved)
(XEN) System RAM: 1023MB (1048124kB)
(XEN) Xen heap: 10MB (10752kB)
(XEN) CPU0: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
(XEN) CPU#0: Physical ID: 0, Logical ID: 0
(XEN) CPU caps: bfebfbff 00000000 00000000 00000000
(XEN) found SMP MP-table at 000f52c0
(XEN) ACPI: RSDP (v000 IntelR ) @
0x000f6d70
(XEN) ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x3fff3000
(XEN) ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x3fff3040
(XEN) ACPI: ASF! (v032 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x3fff6ec0
(XEN) ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x3fff6e40
(XEN) ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @
0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 Pentium 4(tm) XEON(tm) APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) Using ACPI for processor (LAPIC) configuration information
(XEN) Intel MultiProcessor Specification v1.4
(XEN) Virtual Wire compatibility mode.
Starting crond: [ OK ]^M^M
Starting xfs: [ OK ]^M^M
Starting anacron: [ OK ]^M^M
Starting atd: [ OK ]^M^M
Starting system message bus: [ OK ]^M^M
Starting cups-config-daemon: [ OK ]^M^M
Starting HAL daemon: [ OK ]^M^M
Starting xend: [ OK ]^M^M
Unable to handle kernel paging request at virtual address c56c4000
printing eip:
c03bf082
*pde = ma 01413067 pa 00013067
*pte = ma 00000000 pa 55555000
(XEN) Domain 0 shutdown: rebooting
machine.^M\uffffESC[5nESC[5nAT^MAT^M[-- root@xxxxxxxxxxxxxxxxxxxxx
attached -- Mon Nov 7 08:33:21 2005]
AT^MAT^MESC[5nESC[5n __ __ ____ ___ _____
\ \/ /___ _ __ |___ \ / _ \|___ |
\ // _ \ '_ \ __) || | | | / /
/ \ __/ | | | / __/ | |_| | / /
/_/\_\___|_| |_| |_____(_)___(_)_/
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 2.0.7 (root@xxxxxxxxxxxxxx) (gcc version 3.4.3 20050227
(Red Hat 3.4.3-22.fc3)) Wed Sep 7 12:15:54 EDT 2005
Latest ChangeSet:
(XEN) Physical RAM map:
(XEN) 0000000000000000 - 000000000009f800 (usable)
(XEN) 000000000009f800 - 00000000000a0000 (reserved)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000003fff0000 (usable)
(XEN) 000000003fff0000 - 000000003fff3000 (ACPI NVS)
(XEN) 000000003fff3000 - 0000000040000000 (ACPI data)
(XEN) 00000000fec00000 - 0000000100000000 (reserved)
(XEN) System RAM: 1023MB (1048124kB)
(XEN) Xen heap: 10MB (10752kB)
(XEN) CPU0: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
(XEN) CPU#0: Physical ID: 0, Logical ID: 0
(XEN) CPU caps: bfebfbff 00000000 00000000 00000000
(XEN) found SMP MP-table at 000f52c0
(XEN) ACPI: RSDP (v000 IntelR ) @
0x000f6d70
(XEN) ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x3fff3000
(XEN) ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x3fff3040
(XEN) ACPI: ASF! (v032 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x3fff6ec0
(XEN) ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x3fff6e40
(XEN) ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @
0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 Pentium 4(tm) XEON(tm) APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) Using ACPI for processor (LAPIC) configuration information
(XEN) Intel MultiProcessor Specification v1.4
(XEN) Virtual Wire compatibility mode.
(XEN) OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
(XEN) I/O APIC #2 Version 17 at 0xFEC00000.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Processors: 2
(XEN) Using scheduler: Borrowed Virtual Time (bvt)
(XEN) Initializing CPU#0
(XEN) Detected 3006.894 MHz processor.
(XEN) CPU0: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
(XEN) CPU#0: Physical ID: 0, Logical ID: 0
(XEN) CPU caps: bfebfbff 00000000 00000000 00000000
(XEN) CPU0 booted
(XEN) enabled ExtINT on CPU#0
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1
(XEN) masked ExtINT on CPU#1
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) CPU1: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
(XEN) CPU#1: Physical ID: 0, Logical ID: 1
(XEN) CPU caps: bfebfbff 00000000 00000000 00000000
(XEN) CPU1 has booted.
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) Setting 2 in the phys_id_present_map
(XEN) ...changing IO-APIC physical APIC ID to 2 ... ok.
(XEN) init IO_APIC IRQs
(XEN) ..TIMER: vector=0x41 pin1=2 pin2=0
(XEN) Using local APIC timer interrupts.
(XEN) Calibrating APIC timer for CPU0...
(XEN) ..... CPU speed is 3006.9163 MHz.
(XEN) ..... Bus speed is 200.4609 MHz.
(XEN) ..... bus_scale = 0x0000CD4A
(XEN) checking TSC synchronization across CPUs: passed.
(XEN) Time init:
(XEN) .... System Time: 20000368ns
(XEN) .... cpu_freq: 00000000:B33991E0
(XEN) .... scale: 00000001:548CF9A5
(XEN) .... Wall Clock: 1131361083s 200000us
(XEN) PCI: PCI BIOS revision 2.10 entry at 0xfbbf0, last bus=3
(XEN) PCI: Using configuration type 1
(XEN) PCI: Probing PCI hardware
(XEN) PCI: Probing PCI hardware (bus 00)
(XEN) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
(XEN) Transparent bridge - PCI device 8086:244e
(XEN) PCI: Using IRQ router PIIX/ICH [8086/24d0] at 00:1f.0
(XEN) PCI->APIC IRQ transform: (B0,I29,P0) -> 16
(XEN) PCI->APIC IRQ transform: (B0,I29,P1) -> 19
(XEN) PCI->APIC IRQ transform: (B0,I29,P2) -> 18
(XEN) PCI->APIC IRQ transform: (B0,I29,P0) -> 16
(XEN) PCI->APIC IRQ transform: (B0,I29,P3) -> 23
(XEN) PCI->APIC IRQ transform: (B0,I31,P0) -> 18
(XEN) PCI->APIC IRQ transform: (B0,I31,P0) -> 18
(XEN) PCI->APIC IRQ transform: (B0,I31,P1) -> 17
(XEN) PCI->APIC IRQ transform: (B2,I1,P0) -> 18
(XEN) PCI->APIC IRQ transform: (B3,I2,P0) -> 23
(XEN) PCI->APIC IRQ transform: (B3,I3,P0) -> 22
(XEN) PCI->APIC IRQ transform: (B3,I7,P0) -> 16
(XEN) PCI->APIC IRQ transform: (B3,I8,P0) -> 20
(XEN) mtrr: v2.0 (20020519)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found:
'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=2.0,VIRT_BASE=0xC0000000,LOADER=generic,PT_MODE_WRITABLE'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Kernel image: 00c00000->00ffa2b8
(XEN) Initrd image: 00ffb000->0108d200
(XEN) Dom0 alloc.: 01400000->09400000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c056f040
(XEN) Init. ramdisk: c0570000->c0602200
(XEN) Phys-Mach map: c0603000->c0623000
(XEN) Page tables: c0623000->c0626000
(XEN) Start info: c0626000->c0627000
(XEN) Boot stack: c0627000->c0628000
(XEN) TOTAL: c0000000->c0800000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Scrubbing DOM0 RAM: ..done.
(XEN) Initrd len 0x92200, start at 0xc0570000
(XEN) Scrubbing Free RAM: ...........done.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen).
Linux version 2.6.11.12-xen0 (root@xxxxxxxxxxxxxxxxxxxxxxx) (gcc version
3.4.3 20050227 (Red Hat 3.4.3-22.fc3)) #1 Mon Sep 12 13:07:00 EDT 2005
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000008000000 (usable)
0MB HIGHMEM available.
128MB LOWMEM available.
DMI 2.2 present.
IRQ lockup detection disabled
Allocating PCI resources starting at 08000000 (gap: 08000000:f8000000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/ console=tty0 console=ttyS0
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Xen reported: 3006.894 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
vmalloc area: c8800000-fb7fe000, maxmem 34000000
Memory: 124224k/131072k available (2818k kernel code, 6660k reserved,
1020k data, 184k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
checking if image is initramfs... it is
Freeing initrd memory: 584k freed
NET: Registered protocol family 16
PCI: Using configuration type Xen
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Probing PCI hardware (bus 02)
PCI: Probing PCI hardware (bus 03)
PCI: Probing PCI hardware
IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx>
audit: initializing netlink socket (disabled)
audit(1131361086.580:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
Initializing Cryptographic API
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
hw_random hardware driver 1.0.0 loaded
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
HP CISS Driver (v 2.6.4)
Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2-NAPI
Copyright (c) 1999-2004 Intel Corporation.
PCI: Obtained IRQ 18 for device 0000:02:01.0
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
PCI: Obtained IRQ 23 for device 0000:03:02.0
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
pcnet32.c:v1.30i 06.28.2004 tsbogend@xxxxxxxxxxxxxxxx
e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
PCI: Obtained IRQ 20 for device 0000:03:08.0
e100: eth2: e100_probe: addr 0xf2062000, irq 20, MAC addr 00:E0:81:2A:32:1D
netconsole: not configured, aborting
Xen virtual console successfully installed as ttyS
Event-channel device installed.
Initialising Xen netif backend
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Obtained IRQ 18 for device 0000:00:1f.1
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD2000BB-00GUA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 390721968 sectors (200049 MB) w/2048KiB Cache, CHS=24321/255/63,
UDMA(100)
hda: hda1 hda2 hda3
megaraid cmm: 2.20.2.5 (Release Date: Fri Jan 21 00:01:03 EST 2005)
megaraid: 2.20.4.5 (Release Date: Thu Feb 03 12:27:22 EST 2005)
3ware Storage Controller device driver for Linux v1.26.02.000.
PCI: Obtained IRQ 18 for device 0000:00:1f.2
ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xD000 irq 18
ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xCC02 bmdma 0xD008 irq 18
ata1: SATA port has no device.
scsi0 : ata_piix
ata2: SATA port has no device.
scsi1 : ata_piix
Fusion MPT base driver 3.01.18
Copyright (c) 1999-2004 LSI Logic Corporation
Fusion MPT SCSI Host driver 3.01.18
Fusion MPT misc device (ioctl) driver 3.01.18
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
mice: PS/2 mouse device common for all mice
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 1756.000 MB/sec
raid5: using function: pIII_sse (1756.000 MB/sec)
md: multipath personality registered as nr 7
md: faulty personality registered as nr 10
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
ip_conntrack version 2.1 (1024 buckets, 8192 max) - 248 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@xxxxxxxxxxx>.
http://snowman.net/projects/ipt_recent/
ClusterIP Version 0.6 loaded successfully
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
Bridge firewalling registered
Ebtables v2.0 registered
Freeing unused kernel memory: 184k freed
Red Hat nash version 4.2.1.3 starting^M
Mounted /proc filesystem^M
Mounting sysfs^M
Creating /dev^M
Starting udev^M
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Creating root device^M
Mounting root filesystem^M
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
--
Alvin Starr || voice: (416)585-9971
Interlink Connectivity || fax: (416)585-9974
alvin@xxxxxxxxxx ||
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home