I'm just getting started with Xen and am having some trouble getting
networking up and running in domU. The symptoms are that packets can
leave domU and go through xen-br0, but packets are not getting back
into domU. Specifically, this is what I'm seeing when sending a ping
from within domU:
Note: domU is 192.168.0.12
Note: dom0 is 192.168.0.11
[root@domU ~]# tcpdump -i eth0
tcpdump: verbose output suppressed, use -v or -vv for full protocol
decode
listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
19:48:48.173992 arp who-has 192.168.0.11 tell 192.168.0.12
19:48:49.173981 arp who-has 192.168.0.11 tell 192.168.0.12
19:48:50.173981 arp who-has 192.168.0.11 tell 192.168.0.12
19:48:52.183980 arp who-has 192.168.0.11 tell 192.168.0.12
19:48:53.183991 arp who-has 192.168.0.11 tell 192.168.0.12
Watching this ping from dom0 shows a different story:
[root@dom0 ~]# tcpdump -i vif1.1
tcpdump: WARNING: vif1.1: no IPv4 address assigned
tcpdump: verbose output suppressed, use -v or -vv for full protocol
decode
listening on vif1.1, link-type EN10MB (Ethernet), capture size 96 bytes
19:50:41.780777 arp who-has 192.168.0.11 tell 192.168.0.12
19:50:41.969751 arp reply 192.168.0.11 is-at 00:a0:c9:e3:75:5e
19:50:42.900698 arp who-has 192.168.0.11 tell 192.168.0.12
19:50:42.900728 arp reply 192.168.0.11 is-at 00:a0:c9:e3:75:5e
19:50:43.900690 arp who-has 192.168.0.11 tell 192.168.0.12
19:50:43.900717 arp reply 192.168.0.11 is-at 00:a0:c9:e3:75:5e
19:50:44.900677 arp who-has 192.168.0.11 tell 192.168.0.12
19:50:44.900705 arp reply 192.168.0.11 is-at 00:a0:c9:e3:75:5e
19:50:46.910656 arp who-has 192.168.0.11 tell 192.168.0.12
19:50:46.910685 arp reply 192.168.0.11 is-at 00:a0:c9:e3:75:5e
It looks like domU is sending out the arp request, but never getting
the arp reply. However, clearly the arp reply is being sent by
dom0...it seems to be getting lost somewhere in the connection
between vif1.1 and the domU/eth0. I'm including some additional
configuration information about my setup below. If additional
information would be helpful, just let me know.
Does anyone have thoughts about how to solve this?
Thanks,
bryan
========== DOMU Information ====================
[root@domU ~]# ifconfig
eth0 Link encap:Ethernet HWaddr AA:00:00:3D:B1:DD
inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:
255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:1848 (1.8 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:39 errors:0 dropped:0 overruns:0 frame:0
TX packets:39 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4368 (4.2 KiB) TX bytes:4368 (4.2 KiB)
[root@domU ~]# netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window
irtt Iface
192.168.0.0 0.0.0.0 255.255.255.0 U 0
0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0
0 0 eth0
0.0.0.0 192.168.0.254 0.0.0.0 UG 0
0 0 eth0
[root@domU ~]# ping 192.168.0.11
PING 192.168.0.11 (192.168.0.11) 56(84) bytes of data.
From 192.168.0.12 icmp_seq=0 Destination Host Unreachable
From 192.168.0.12 icmp_seq=1 Destination Host Unreachable
From 192.168.0.12 icmp_seq=2 Destination Host Unreachable
From 192.168.0.12 icmp_seq=3 Destination Host Unreachable
From 192.168.0.12 icmp_seq=4 Destination Host Unreachable
From 192.168.0.12 icmp_seq=5 Destination Host Unreachable
--- 192.168.0.11 ping statistics ---
7 packets transmitted, 0 received, +6 errors, 100% packet loss, time
6055ms
, pipe 4
[root@domU ~]#
========== DOM0 Information ====================
[root@dom0 ~]# xm list
Name ID Mem(MiB) CPU VCPUs State Time(s)
Domain-0 0 1500 0 1 r----- 85.7
domU 1 255 0 1 -b---- 8.7
[root@dom0 ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:A0:C9:E3:75:5E
inet addr:192.168.0.11 Bcast:192.168.0.255 Mask:
255.255.255.0
inet6 addr: fe80::2a0:c9ff:fee3:755e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:221 errors:0 dropped:0 overruns:0 frame:0
TX packets:224 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:66104 (64.5 KiB) TX bytes:34473 (33.6 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:135 errors:0 dropped:0 overruns:0 frame:0
TX packets:135 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:10210 (9.9 KiB) TX bytes:10210 (9.9 KiB)
peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:215 errors:0 dropped:0 overruns:0 frame:0
TX packets:308 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:71438 (69.7 KiB) TX bytes:41704 (40.7 KiB)
vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:224 errors:0 dropped:0 overruns:0 frame:0
TX packets:222 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:34473 (33.6 KiB) TX bytes:66194 (64.6 KiB)
vif1.1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:53 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:89 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2226 (2.1 KiB) TX bytes:0 (0.0 b)
xen-br0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:102 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:9297 (9.0 KiB) TX bytes:378 (378.0 b)
[root@dom0 ~]# netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window
irtt Iface
192.168.0.0 0.0.0.0 255.255.255.0 U 0
0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0
0 0 eth0
0.0.0.0 192.168.0.254 0.0.0.0 UG 0
0 0 eth0
[root@dom0 ~]# cat /etc/xen/domU
kernel = "/boot/vmlinuz-2.6.12-xenU"
memory = 256
name = "domU"
nics=1
disk = ['file:/opt/xen_images/domU.img,sda1,w' ]
root = "/dev/sda1"
extra = "ro selinux=0 3"
[root@dom0 ~]#
====================
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
| 
Home