|
|
|
|
|
|
|
|
|
|
xen-users
Re: [Xen-users] invalid network interface after starting xend
On Tue, 2005-09-27 at 15:44 +0200, Stephan Böni wrote:
> Before starting xend (xen 3.0) these are my correct network interfaces:
>
> eth0 Link encap:Ethernet HWaddr 00:14:5E:0A:53:04
> inet addr:192.168.1.51 Bcast:192.168.1.255 Mask:255.255.255.0
>
> eth1 Link encap:Ethernet HWaddr 00:14:5E:0A:53:05
> inet addr:192.168.1.52 Bcast:192.168.1.255 Mask:255.255.255.0
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
>
> After starting xend i have some ungly interfaces:
>
> eth1 Link encap:Ethernet HWaddr 00:14:5E:0A:53:05
> inet addr:192.168.1.52 Bcast:192.168.1.255 Mask:255.255.255.0
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
>
> peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
> UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
>
> vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>
> xen-br0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>
> Where is going my eth0 interface? And what is this funny peth0 interface with
> this wrong mac address?
>
> Thanks for your help.
>
> Stephan
>
I have been seeing similar issues as well, trying to use more than 1 nic
on a domU with unstable has not been possible for me. If you really want
to crash a domU quick, try to add a vlan to your dom0 and domU share on
a second nic :-)
>From what I have observed you also can't bring a new interface online
after xend has started as well. Meaning add a new ethernet to dom0 than
try to get a domU interface to bridge to it.
What makes you think the peth0 has the wrong mac address?
On my unstable
peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:382176 errors:0 dropped:0 overruns:0 frame:0
TX packets:359951 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:290578836 (277.1 MiB) TX bytes:194010196 (185.0 MiB)
Interrupt:18 Base address:0x1c00
[root@inyoureyes mail]# brctl show
bridge name bridge id STP enabled interfaces
xen-br0 8000.feffffffffff no peth0
vif0.0
vif1.1
vif2.1
vif3.1
vif4.1
vif5.1
vif6.1
vif8.1
Regards,
Ted
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
|
|