Kent Watsen wrote:
One of the list members clued me in [offline] regarding needing a
ramdisk - after setting that and configing its network, the suse-based
domain is up!
But the guest domain spits out a ton of errors when booting (colored in
RED) - I don't get any of this when booting this domain directly from GRUB:
Linux version 2.6.11.4-20a-xen (geeko@buildhost) (gcc version 3.3.5
[snip]
Initializing Cryptographic API
vesafb: abort, cannot reserve video memory at 0x0
vesafb: abort, cannot ioremap video memory 0x0 @ 0x0
Trying to free nonexistent resource <00000000-ffffffff>
vesafb: probe of vesafb.0 failed with error -5
Harmless
isapnp: Scanning for PnP cards...
[snip]
INIT: version 2.85 booting
System Boot Control: Running /etc/init.d/boot
Mounting /proc filesystem done
Mounting sysfs on /sys done
Mounting /dev/pts done
Boot logging started on /dev/tty1(/dev/console) at Mon Sep 26 05:00:18 2005
Mounting shared memory FS on /dev/shm done
Activating swap-devices in /etc/fstab...
Adding 1052216k swap on /dev/hdb1. Priority:42 extents:1 failed
Don't know what is wrong here. What does
cat /proc/swaps
say?
Activating device mapper...
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
Creating /dev/mapper/control character device with major:10 minor:63.
done
Checking file systems...
fsck 1.36 (05-Feb-2005) done
Setting up kernel module dependencies (if required) done
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
nothing was mounted done
Setting up the CMOS clockhwclock is unable to get I/O port access: the
iopl(3) call failed.
hwclock is unable to get I/O port access: the iopl(3) call failed.
failed
This is harmless
Creating /var/log/boot.msg done
Starting udevd done
Capability LSM initialized
Restore device permissions done
ieee1394: raw1394: /dev/raw1394 device initialized
video1394: Installed video1394 module
Loading required kernel modules done
Coldplug
Coldplug: cleaning /events Activating remaining swap-devices in
/etc/failed..
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
Enabling syn flood protection done
Disabling IP forwarding done
done
lp: driver loaded but no devices found
hwup: Loading module 'lp' for device 'printer'
processing events done
Setting up hostname 'suse' done
Setting up loopback interface lo lo IP address:
127.0.0.1/8
done
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local done
INIT: Entering runlevel: 3
Boot logging started on /dev/tty1(/dev/console) at Mon Sep 26 05:00:26 2005
Master Resource Control: previous runlevel: N, switching to runlevel:3
Starting D-BUS daemon done
Setting up network interfaces:
lo lo IP address:
127.0.0.1/8 done
eth0 eth0 No configuration found for
eth0 unused
Waiting for mandatory devices: eth-id-00:c0:a8:7c:cf:9b
15 SCSI subsystem initialized
st: Version 20041025, fixed bufsize 32768, s/g segs 256
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
14 13 12 11 10 8 7 Initializing random number generator done
Starting resource manager done
6 5 4 3 2 1 0
eth-id-00:c0:a8:7c:cf:9b No interface found failed
look for a file named
/etc/sysconfig/network/ifcfg-eth-id-00:c0:a8:7c:cf:9b
try renaming it to ifconfig-eth0
Setting up service network . . . . . . . . . . . . . . failed
Starting syslog services done
Starting RPC portmap daemon done
Importing Net File System (NFS) unused
Starting sound driver: intel8x0 done
Starting nfsboot (sm-notify) done
Starting mail service (Postfix)Starting Name Service Cache DaemonNET:
Registered protocol family 10
Disabled Privacy Extensions on device c032c7a0(lo)
IPv6 over IPv4 tunneling driver
Disabled Privacy Extensions on device cf265400(sit0)
Loading keymap Couldnt open /dev/tty1
Loading /usr/share/kbd/keymaps/i386/qwerty/us.map.gz failed
Harmless
Loading compose table winkeys shiftctrl latin1.add failed
Harmless
Start Unicode mode
Couldnt open /dev/tty1
Couldnt open /dev/tty2
Couldnt open /dev/tty3
skipped
Starting powersaved done
Couldnt open /dev/tty4
Couldnt open /dev/tty5
Couldnt open /dev/tty6 failed
Loading console font lat9w-16.psfu -m trivial G0:loadable
Couldnt open /dev/tty1
Couldnt open /dev/tty2
Couldnt open /dev/tty3
Couldnt open /dev/tty4
Couldnt open /dev/tty5
Couldnt open /dev/tty6 failed
Couldnt get a file descriptor referring to the console
done
skipped
All the above are harmless
Starting hardware scan on bootStarting CRON daemon done
Starting SSH daemon done
Starting HAL daemonNon-volatile memory driver v1.2
done
Starting xend failed
Harmless for a domU, you can turn it off using the runlevel
editor tool or
insserv -d /etc/init.d/xend
done
Master Resource Control: runlevel 3 has been
reached
Failed services in runlevel 3: network kbd xend
Skipped services in runlevel 3: nfs powersaved
Welcome to SuSE Linux 9.3 (i586) - Kernel 2.6.11.4-20a-xen (tty1).
suse login:
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
| 
Home