I have a DELL PowerEdge 6450 that XEN would not boot on. During the
boot I get the system just hangs right after hit displays unmouting
old /sys. I tried booting with the no smp kernel option and that did
not work. Any ideas ?
Thanks
<snip>
EXT3-fs: mounted filesystem with ordered date mode
switching to new root
unmounting old /proc
unmounting old /sys
</snip>
[john@zebra ~]$ uname -a
Linux zebra 2.6.12-1.1447_FC4smp #1 SMP Fri Aug 26 20:57:13 EDT 2005
i686 i686 i386 GNU/Linux
[john@zebra ~]$
[john@zebra ~]$
[john@zebra ~]$
[john@zebra ~]$ dmesg
Linux version 2.6.12-1.1447_FC4smp
(bhcompile@xxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.0.1 20050727
(Red Hat 4.0.1-5)) #1 SMP Fri Aug 26 20:57:13 EDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000e7ffe000 (usable)
BIOS-e820: 00000000e7ffe000 - 00000000e8000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
2815MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 950270
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 720894 pages, LIFO batch:31
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 DELL ) @ 0x000fdcb0
ACPI: RSDT (v001 DELL PE6450 0x00000002 MSFT 0x0100000a) @ 0x000fdcc4
ACPI: FADT (v001 DELL PE6450 0x00000002 MSFT 0x0100000a) @ 0x000fdcf0
ACPI: MADT (v001 DELL PE6450 0x00000002 MSFT 0x0100000a) @ 0x000fdd64
ACPI: DSDT (v001 DELL PE6450 0x00000002 MSFT 0x0100000a) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
Processor #3 6:10 APIC version 17
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2 6:10 APIC version 17
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 6:10 APIC version 17
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[16])
IOAPIC[1]: apic_id 5, version 17, address 0xfec01000, GSI 16-31
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at e8000000 (gap: e8000000:16c00000)
Built 1 zonelists
Kernel command line: ro root=/dev/sox/vol00
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec01000)
Initializing CPU#0
CPU 0 irqstacks, hard=c042d000 soft=c040d000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 699.574 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3762416k/3801080k available (2087k kernel code, 37304k
reserved, 775k data, 236k init, 2883576k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1388.54 BogoMIPS (lpj=694272)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040
00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel Pentium III (Cascades) stepping 01
Booting processor 1/0 eip 3000
CPU 1 irqstacks, hard=c042e000 soft=c040e000
Initializing CPU#1
Calibrating delay loop... 1396.73 BogoMIPS (lpj=698368)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040
00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Cascades) stepping 01
Booting processor 2/1 eip 3000
CPU 2 irqstacks, hard=c042f000 soft=c040f000
Initializing CPU#2
Calibrating delay loop... 1396.73 BogoMIPS (lpj=698368)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040
00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel Pentium III (Cascades) stepping 01
Booting processor 3/2 eip 3000
CPU 3 irqstacks, hard=c0430000 soft=c0410000
Initializing CPU#3
Calibrating delay loop... 1396.73 BogoMIPS (lpj=698368)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040
00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel Pentium III (Cascades) stepping 01
Total of 4 processors activated (5578.75 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=0 pin2=-1
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000001
groups: 00000001
domain 1: span 0000000f
groups: 00000001 00000002 00000004 00000008
CPU1 attaching sched-domain:
domain 0: span 00000002
groups: 00000002
domain 1: span 0000000f
groups: 00000002 00000004 00000008 00000001
CPU2 attaching sched-domain:
domain 0: span 00000004
groups: 00000004
domain 1: span 0000000f
groups: 00000004 00000008 00000001 00000002
CPU3 attaching sched-domain:
domain 0: span 00000008
groups: 00000008
domain 1: span 0000000f
groups: 00000008 00000001 00000002 00000004
checking if image is initramfs... it is
Freeing initrd memory: 1894k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc7ee, last bus=14
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050729
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
ACPI: Assume root bridge [\_SB_.PCI1] segment is 0
ACPI: Assume root bridge [\_SB_.PCI2] segment is 0
Boot video device is 0000:00:04.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:03)
PCI: Probing PCI hardware (bus 03)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
ACPI: Assume root bridge [\_SB_.PCI1] segment is 0
ACPI: Assume root bridge [\_SB_.PCI2] segment is 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Root Bridge [PCI2] (0000:0e)
PCI: Probing PCI hardware (bus 0e)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
ACPI: Assume root bridge [\_SB_.PCI1] segment is 0
ACPI: Assume root bridge [\_SB_.PCI2] segment is 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 *10 11 12 14)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 6 7 9 10 *11 12 14)
ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 6 7 9 10 *11 12 14)
ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK9] (IRQs 3 4 5 6 7 9 *10 11 12 14)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LUSB] (IRQs 3 4 5 6 7 10 11 12 14) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:0a: ioport range 0x814-0x85b could not be reserved
pnp: 00:0a: ioport range 0x8a0-0x8af has been reserved
pnp: 00:0a: ioport range 0xc00-0xcd7 has been reserved
pnp: 00:0a: ioport range 0xf50-0xf58 has been reserved
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1127239526.917:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 1C1942C715575330
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: CPU0 (power states: C1[C1])
ACPI: CPU3 (power states: C1[C1])
ACPI: CPU2 (power states: C1[C1])
ACPI: CPU1 (power states: C1[C1])
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:00.0 failed with error -22
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:00.1 failed with error -22
agpgart: Detected ServerWorks CNB20HE chipset: No AGP present.
agpgart: Detected ServerWorks CNB20HE chipset: No AGP present.
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks OSB4: IDE controller at PCI slot 0000:00:0f.1
SvrWks OSB4: chipset revision 0
SvrWks OSB4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: TEAC CD-ROM CD-224E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: ATAPI 24X CD-ROM drive, 128kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 256Kbytes
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 236k freed
input: AT Translated Set 2 keyboard on isa0060/serio0
SCSI subsystem initialized
logips2pp: Detected unknown logitech mouse model 1
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 177
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
ACPI: PCI Interrupt 0000:00:05.1[B] -> GSI 18 (level, low) -> IRQ 185
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
megaraid cmm: 2.20.2.5 (Release Date: Fri Jan 21 00:01:03 EST 2005)
megaraid: 2.20.4.5 (Release Date: Thu Feb 03 12:27:22 EST 2005)
megaraid: probe new device 0x101e:0x1960:0x1028:0x0493: bus 5:slot 0:func 0
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 23 (level, low) -> IRQ 193
megaraid: fw version:[1.80] bios version:[3.29]
scsi2 : LSI Logic MegaRAID driver
scsi[2]: scanning scsi channel 0 [Phy 0] for non-raid devices
Vendor: DELL Model: 1x4 U2W SCSI BP Rev: 1.30
Type: Processor ANSI SCSI revision: 02
scsi[2]: scanning scsi channel 1 [Phy 1] for non-raid devices
scsi[2]: scanning scsi channel 2 [virtual] for logical drives
Vendor: MegaRAID Model: LD 0 RAID5 69G Rev: 1.80
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 142041088 512-byte hdwr sectors (72725 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
SCSI device sda: 142041088 512-byte hdwr sectors (72725 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
sda: sda1 sda2
Attached scsi disk sda at scsi2, channel 2, id 0, lun 0
qla1280: Skipping AMI SubSys Vendor ID Chip
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
hda: packet command error: status=0x51 { DriveReady SeekComplete Error }
hda: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
cfq: depth 4 reached, tagging now on
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
Attached scsi generic sg0 at scsi2, channel 0, id 6, lun 0, type 3
Attached scsi generic sg1 at scsi2, channel 2, id 0, lun 0, type 0
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 26 (level, low) -> IRQ 201
e100: eth0: e100_probe: addr 0xfbefc000, irq 201, MAC addr 00:B0:D0:EA:43:EA
ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 22 (level, low) -> IRQ 209
e100: eth1: e100_probe: addr 0xfa8ff000, irq 209, MAC addr 00:02:B3:8B:FB:60
ACPI: PCI Interrupt 0000:03:0b.0[A] -> GSI 25 (level, low) -> IRQ 217
e100: eth2: e100_probe: addr 0xfa8fe000, irq 217, MAC addr 00:02:B3:8B:FB:4F
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V.
Savochkin <saw@xxxxxxxxxxxxx> and others
shpchp: acpi_pciehprm:\_SB_.PCI0 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(1) at s:b:d:f=0x00:00:07:00
shpchp: acpi_pciehprm:\_SB_.PCI0 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI0 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI0 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI0 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI0 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI0 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI0 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(2) at s:b:d:f=0x00:03:08:00
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(3) at s:b:d:f=0x00:03:09:00
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(4) at s:b:d:f=0x00:03:0a:00
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(5) at s:b:d:f=0x00:03:0b:00
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI1 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI2 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(6) at s:b:d:f=0x00:0e:0c:00
shpchp: acpi_pciehprm:\_SB_.PCI2 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI2 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI2 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI2 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI2 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI2 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI2 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI2 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(7) at s:b:d:f=0x00:0e:0d:00
shpchp: acpi_pciehprm:\_SB_.PCI2 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI2 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI2 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI2 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI2 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI2 OSHP fails=0x5
shpchp: acpi_pciehprm:\_SB_.PCI2 OSHP fails=0x5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
piix4_smbus 0000:00:0f.0: Host SMBus controller not enabled!
Using generic hotkey driver
ACPI: Power Button (FF) [PWRF]
ibm_acpi: Using generic hotkey driver
toshiba_acpi: Using generic hotkey driver
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
hda: packet command error: status=0x51 { DriveReady SeekComplete Error }
hda: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2097144k swap on /dev/sox/vol01. Priority:-1 extents:1
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 256 bytes per conntrack
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.7
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.5
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
lp0: console ready
NET: Registered protocol family 10
Disabled Privacy Extensions on device c037e860(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home