WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] 2 network cards and two physical network.

To: jean-michel.caricand@xxxxxxxxxxx, xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] 2 network cards and two physical network.
From: "Dirk H. Schulz" <dirk.schulz@xxxxxxxxxxxxx>
Date: Thu, 25 Aug 2005 10:55:39 +0200
Delivery-date: Thu, 25 Aug 2005 08:53:45 +0000
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <430D7547.8080403@xxxxxxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
References: <430D7547.8080403@xxxxxxxxxxx>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
User-agent: Mozilla Thunderbird 1.0.6 (Macintosh/20050716)
Hi Jean,

Jean-Michel Caricand schrieb:

Hi all,

I have 2 network cards on my computer. I want to use :
- eth0 for xen0 host: ip 192.168.1.4
- eth1 for xenU guest: ip 192.168.2.1

guest and host are not on the same network. eth0 is configured when
I start xend (xen-br0->eth0).
I configure eth1 with :
/etc/xen/scripts/network start bridge=xen-br1 netdev=eth1

In my guest domain config, I add vif = [ 'bridge=xen-br1'], but when I start
my domain, I can't ping machines on network 192.168.2.0/24. ifconfig
on guest show a correct config.

What is your correct config? Please provide it.

And did you verify with brctl show that eth1 is on xen-br1 and working?

What is the contents of the routing table on dom0?

Since the above config should work, any additional info would help tracking down the problem.

Dirk

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

<Prev in Thread] Current Thread [Next in Thread>