Re: [Xen-users] How to setup CONFIG_SCSI_SATA_VIA=y and CONFIG_SK98LIN=y on a custom xenlinux builds?

[Marlon <marlon@xxxxxxxxxxxxxxxxx>]

Hi,

That's the problem, when I run "make ARCH=xen menuconfig ",  the  
drivers  that I need don't  show up,
even select  CONFIG_XEN_PHYSDEV_ACCESS=y .

Regards,

Marlon



Subhabrata Bhattacharya escreveu:

> Hi, 
>
> Once you have done the make world, you would get the directories.Now 
>
> $cd linux-2.6.11-xen0
> $make ARCH=xen menuconfig 
> and set your options there.
> Mine worked this way.
> ~$ubh
>
> On 8/10/05, Marlon <marlon@xxxxxxxxxxxxxxxxx> wrote:
>  
>
> > Hi,
> >
> > How to setup CONFIG_SCSI_SATA_VIA=y and CONFIG_SK98LIN=y on a custom
> > xenlinux builds?
> >
> > I can't do a custom build of Xen to my hardware.
> > I already copy a custom .config to directory linux-2.6.11-xen0/ , but
> > when run  "make ARCH=xen oldconfig"
> > the options to sata and sk98 drivers don't show up.
> >
> > It's possible to custom the xen0 kernel before to do a "make world" ?
> > The directories above don't show up before to do a "make world":
> >
> > drwxr-xr-x  19 marlon users     1464 2005-08-10 12:52 linux-2.6.11-xen0
> > drwxr-xr-x   7 marlon users      200 2005-08-03 20:57
> > linux-2.6.11-xen-sparse
> > drwxr-xr-x  19 marlon users     1464 2005-08-10 00:12 linux-2.6.11-xenU
> > drwxr-xr-x  18 marlon users      656 2005-08-09 23:54 pristine-linux-2.6.11
> > drwxr-xr-x  18 marlon users      688 2005-08-09 23:54 ref-linux-2.6.11
> >
> > There is another way to do a custom build?
> > Instructions on the section 2.3.3 on Xen users' manual doesn't work for
> > my hardware.
> >
> > Regards,
> >
> > Marlon
> >
> >
> >
> >
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
> >
> >    
>  
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users