[Xen-users] tg3 network card not working

Hello

I am using ASUS M6800NE notebook.

There is integrated gigabit Broadcom network card.

I started to play with 2.0.6 - there were problems with random hangs - probably due to missing ACPI but the network was running w/o problems.

So i decided to move to Xen devel 3.0. Finaly the random hangs are away but I get into one new problem.
The integrated network card is not working - neither with DHCP nor fixed address.

Another interesting thing is that dom0 without Power management ACPI wont even boot.

Next thing I tried was making the coresponding tg3 driver as module and then compiling original driver from Broadcom website - same result.

With the normal 2.6.11 and 2.6.12 kernel is network working like a charm.

Dmesg XEN:

__ __            _____ ___         _                _
\ \/ /___ _ __   |___ / / _ \     __| | _____   _____| |
\ // _ \ '_ \    |_ \| | | |__ / _` |/ _ \ \ / / _ \ |
/ \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ |
/_/\_\___|_| |_| |____(_)___/    \__,_|\___| \_/ \___|_|

http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory

Xen version 3.0-devel (root@(none)) (gcc version 3.3.5-20050130 (Gentoo 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) Wed Jul 20 09:30:39 CEST 2005
Latest ChangeSet:

(XEN) Physical RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 000000000009fc00 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000003ff40000 (usable)
(XEN) 000000003ff40000 - 000000003ff50000 (ACPI data)
(XEN) 000000003ff50000 - 0000000040000000 (ACPI NVS)
(XEN) System RAM: 1022MB (1047420kB)
(XEN) Xen heap: 10MB (10748kB)
(XEN) PAE disabled.
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f5df0
(XEN) ACPI: RSDT (v001 A M I OEMRSDT 0x03000528 MSFT 0x00000097) @ 0x3ff40000
(XEN) ACPI: FADT (v001 A M I OEMFACP 0x03000528 MSFT 0x00000097) @ 0x3ff40200
(XEN) ACPI: OEMB (v001 A M I OEMBIOS 0x03000528 MSFT 0x00000097) @ 0x3ff50040
(XEN) ACPI: DSDT (v001 1ABSP 1ABSP001 0x00000001 MSFT 0x02000001) @ 0x00000000
(XEN) Found and enabled local APIC!
(XEN) Initializing CPU#0
(XEN) Detected 600.032 MHz processor.
(XEN) Using scheduler: Simple EDF Scheduler (sedf)
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 06
(XEN) SMP motherboard not detected.
(XEN) Time init:
(XEN) .... cpu_freq:    00000000:23C3C6C0
(XEN) .... scale:       00000001:AAA4AAB4
(XEN) .... Wall Clock: 1121897482s 20000us
(XEN) Brought up 1 CPUs
(XEN) mtrr: v2.0 (20020519)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found: 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC0000000,PAE=no,LOADER=generic'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.:   08000000->10000000 (31232 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c04f5ee4
(XEN) Init. ramdisk: c04f6000->c04f6000
(XEN) Phys-Mach map: c04f6000->c0534800
(XEN) Page tables:   c0535000->c0538000
(XEN) Start info:    c0538000->c0539000
(XEN) Boot stack:    c0539000->c053a000
(XEN) TOTAL:         c0000000->c0800000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Scrubbing Free RAM: ...........done.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen).

Dmesg Dom0:

Linux version 2.6.12-xen0 (root@asusnb) (gcc version 3.3.5-20050130 (Gentoo 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #11 Wed Jul 20 16:09:50 CEST 2005
BIOS-provided physical RAM map:
Xen: 0000000000100000 - 000000000fa00000 (usable)
0MB HIGHMEM available.
250MB LOWMEM available.
On node 0 totalpages: 64000
DMA zone: 64000 pages, LIFO batch:31
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f5df0
ACPI: RSDT (v001 A M I OEMRSDT 0x03000528 MSFT 0x00000097) @ 0x3ff40000
ACPI: FADT (v001 A M I OEMFACP 0x03000528 MSFT 0x00000097) @ 0x3ff40200
ACPI: OEMB (v001 A M I OEMBIOS 0x03000528 MSFT 0x00000097) @ 0x3ff50040
ACPI: DSDT (v001 1ABSP 1ABSP001 0x00000001 MSFT 0x02000001) @ 0x00000000
IRQ lockup detection disabled
Allocating PCI resources starting at 0fa00000 (gap: 0fa00000:f0600000)
Built 1 zonelists
Kernel command line: root=/dev/hda6
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Xen reported: 600.032 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
vmalloc area: d0800000-fb7fe000, maxmem 34000000
Memory: 248064k/256000k available (2757k kernel code, 6808k reserved, 921k data, 152k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1199.30 BogoMIPS (lpj=5996544)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9d3b1 00000000 00000000 00000040 00000180 00000000 00000000
CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
ACPI: setting ELCR to 0200 (from 0c30)
NET: Registered protocol family 16
PCI: Using configuration type 1
ACPI: Subsystem revision 20050309
    ACPI-0265: *** Error: Region EmbeddedControl(3) has no handler
    ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.ACS_] (Node c12406a0), AE_NOT_EXIST
    ACPI-1138: *** Error: Method execution failed [\_SB_.AC__._INI] (Node c1240140), AE_NOT_EXIST
    ACPI-0265: *** Error: Region EmbeddedControl(3) has no handler
    ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.BATS] (Node c1240700), AE_NOT_EXIST
    ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._STA] (Node c1243420), AE_NOT_EXIST
    ACPI-0158: *** Error: Method execution failed [\_SB_.BAT0._STA] (Node c1243420), AE_NOT_EXIST
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Enabled i801 SMBus device
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 28)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs *10 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 6 10)
ACPI: PCI Interrupt Link [LNKE] (IRQs 6 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 12)
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: IRQ init
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Grant table initialized
Initializing Cryptographic API
ACPI: AC Adapter [AC] (off-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: Thermal Zone [THRM] (55 C)
Asus Laptop ACPI Extras version 0.29
M6NE model detected, supported
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: AGP aperture is 256M @ 0xe0000000
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 8 devices)
pcnet32.c:v1.30j 29.04.2005 tsbogend@xxxxxxxxxxxxxxxx
tg3.c:v3.31 (June 8, 2005)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4
eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:11:d8:8b:fb:6a
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[763f0000]
PPP generic driver version 2.4.2
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
Blkif backend is using grant tables.
Initialising Xen netif backend
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: HTS548080M9AT00, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TSSTcorpCD/DVDW TS-L532A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 1024KiB
hda: Host Protected Area detected.
    current capacity is 152119485 sectors (77885 MB)
    native capacity is 156301488 sectors (80026 MB)
hda: Host Protected Area disabled.
hda: 156301488 sectors (80026 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
Bluetooth: HCI USB driver ver 2.8
usbcore: registered new driver hci_usb
Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC).
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4
Failed to obtain physical IRQ 4
PCI: Setting latency timer of device 0000:00:1f.5 to 64
input: AT Translated Set 2 keyboard on isa0060/serio0
intel8x0_measure_ac97_clock: measured 48894 usecs
intel8x0: clocking to 48000
ALSA device list:
#0: Intel 82801DB-ICH4 with STAC9750,51 at 0xffaff800, irq 4
NET: Registered protocol family 2
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x926eb1, caps: 0xa0471b/0x0
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
Bridge firewalling registered
Bluetooth: L2CAP ver 2.7
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.5
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem).
Freeing unused kernel memory: 152k freed

Lspci -vv :

0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 21)
    Subsystem: ASUSTeK Computer Inc.: Unknown device 186a
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
    Latency: 0
    Region 0: Memory at e0000000 (32-bit, prefetchable)
    Capabilities: [e4] #09 [4104]
    Capabilities: [a0] AGP version 2.0
        Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
        Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 21) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
    I/O behind bridge: 0000d000-0000dfff
    Memory behind bridge: ff800000-ff8fffff
    Prefetchable memory behind bridge: ce900000-de9fffff
    Expansion ROM at 0000d000 [disabled] [size=4K]
    BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
    Subsystem: ASUSTeK Computer Inc.: Unknown device 1869
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin A routed to IRQ 11
    Region 4: I/O ports at e800 [size=32]

0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
    Subsystem: ASUSTeK Computer Inc.: Unknown device 1869
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin B routed to IRQ 5
    Region 4: I/O ports at e880 [size=32]

0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
    Subsystem: ASUSTeK Computer Inc.: Unknown device 1869
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin C routed to IRQ 10
    Region 4: I/O ports at ec00 [size=32]

0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
    Subsystem: ASUSTeK Computer Inc.: Unknown device 1868
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin D routed to IRQ 10
    Region 0: Memory at ffaffc00 (32-bit, non-prefetchable)
    Capabilities: [50] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] #0a [2080]

0000:00:1e.0 PCI bridge: Intel Corp. 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode])
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
    Latency: 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
    Memory behind bridge: ff900000-ff9fffff
    Prefetchable memory behind bridge: dea00000-deafffff
    BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0

0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
    Subsystem: ASUSTeK Computer Inc.: Unknown device 1869
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin A routed to IRQ 10
    Region 0: I/O ports at <unassigned>
    Region 1: I/O ports at <unassigned>
    Region 2: I/O ports at <unassigned>
    Region 3: I/O ports at <unassigned>
    Region 4: I/O ports at ffa0 [size=16]
    Region 5: Memory at 0fa00000 (32-bit, non-prefetchable) [size=1K]

0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
    Subsystem: ASUSTeK Computer Inc.: Unknown device 1869
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin B routed to IRQ 0
    Region 4: I/O ports at 0540 [size=32]

0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
    Subsystem: ASUSTeK Computer Inc.: Unknown device 1713
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin B routed to IRQ 4
    Region 0: I/O ports at ee00
    Region 1: I/O ports at e000 [size=64]
    Region 2: Memory at ffaff800 (32-bit, non-prefetchable) [size=512]
    Region 3: Memory at ffaff400 (32-bit, non-prefetchable) [size=256]
    Capabilities: [50] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
    Subsystem: ASUSTeK Computer Inc.: Unknown device 1826
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin B routed to IRQ 4
    Region 0: I/O ports at e400
    Region 1: I/O ports at e080 [size=128]
    Capabilities: [50] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] (prog-if 00 [VGA])
    Subsystem: ASUSTeK Computer Inc.: Unknown device 1772
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2000ns min), cache line size 10
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at d0000000 (32-bit, prefetchable) [size=ff8c0000]
    Region 1: I/O ports at d800 [size=256]
    Region 2: Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K]
    Expansion ROM at 00020000 [disabled]
    Capabilities: [58] AGP version 2.0
        Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
        Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
    Capabilities: [50] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
    Subsystem: ASUSTeK Computer Inc.: Unknown device 1735
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (16000ns min), cache line size 10
    Interrupt: pin A routed to IRQ 4
    Region 0: Memory at ff9f0000 (32-bit, non-prefetchable)
    Capabilities: [48] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
        Status: D0 PME-Enable- DSel=0 DScale=1 PME-
    Capabilities: [50] Vital Product Data
    Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
        Address: feff7ffebdffeffc Data: ffff

0000:02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
    Subsystem: ASUSTeK Computer Inc.: Unknown device 1864
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin A routed to IRQ 0
    Region 0: Memory at 0fa01000 (32-bit, non-prefetchable) [disabled]
    Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
    I/O window 0: 00000000-00000003 [disabled]
    I/O window 1: 00000000-00000003 [disabled]
    BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
    16-bit legacy interface ports at 0001

0000:02:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
    Subsystem: ASUSTeK Computer Inc.: Unknown device 1864
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin B routed to IRQ 255
    Region 0: Memory at 0fa02000 (32-bit, non-prefetchable)
    Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
    I/O window 0: 00000000-00000003
    I/O window 1: 00000000-00000003
    BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
    16-bit legacy interface ports at 0001

0000:02:01.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 04) (prog-if 10 [OHCI])
    Subsystem: ASUSTeK Computer Inc.: Unknown device 1867
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (500ns min, 1000ns max)
    Interrupt: pin C routed to IRQ 10
    Region 0: Memory at ff9ef800 (32-bit, non-prefetchable)
    Capabilities: [dc] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 PME-Enable- DSel=0 DScale=2 PME-

0000:02:02.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)
    Subsystem: Intel Corp.: Unknown device 2701
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (750ns min, 6000ns max), cache line size 10
    Interrupt: pin A routed to IRQ 4
    Region 0: Memory at ff9ee000 (32-bit, non-prefetchable)
    Capabilities: [dc] Power Management version 2
        Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 PME-Enable- DSel=0 DScale=1 PME-

Do you have any idea?

koxman

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

WARNING - OLD ARCHIVES

xen-users

[Xen-users] tg3 network card not working