WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] Booting halts

> Alas, debug mode give me nothing. Same error and same logs. Normal booting
> of my 2.6.11 kernel goes like this
>
> kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> kernel: NFORCE2: IDE controller at PCI slot 0000:00:09.0
> kernel: NFORCE2: chipset revision 162
> kernel: NFORCE2: not 100%% native mode: will probe irqs later
> kernel: NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
> kernel: NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
> ...
>
> but if i try xen-patched 2.6.10 it says following and halt
>
> kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx

Hrrrm.  Might be fixed by the ACPI changes in the unstable tree.  You could 
try that out - those fixes look unlikely to go into a release until 3.0 
itself.

> I want to try 2.6.11 kernel to work with xen. Is there way to do that?
> Where can i get xen patches?

The -testing and -unstable trees both use 2.6.11 by default.

Cheers,
Mark

> Konstantin.
>
> On 5/8/05, Kip Macy <kip.macy@xxxxxxxxx> wrote:
> > It may be some ACPI related issue that will be fixed in the not too
> > distant future. Try enabling debug and verbose in xen - that *might*
> > tell you more.
> >
> > -Kip
> >
> > On 5/7/05, Konstantin Selivanov <konstantin.selivanov@xxxxxxxxx> wrote:
> > > Hello.
> > >
> > > Can anyone answer my newbie questions? When i try to boot xen image it
> > > halts after string
> > > ide: Assuming 33MHz system bus...
> > >
> > > I have NVIDIA nForce2 chip and use Gentoo Linux. I looked for same
> >
> > problem
> >
> > > in archives but
> > > didn't find anything useful. What's wrong? Is this hardware supported?
> > >
> > > With best regards, Konstantin.
> > >
> > > _______________________________________________
> > > Xen-users mailing list
> > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

<Prev in Thread] Current Thread [Next in Thread>