Now, I don't know how domainU drive speed works or any of it really.
But here's what I'm doing:
Have a server : intel 875 chipset intel board, intel p3.06mhz, 1 g ram,
twin WD Raptor 36G drives.
Now, I've put the domain0 in a little space as possible spreading usr
and var to /dev/sdb and / and swap to /dev/sda.
My first domain will be a basic partition on the /dev/sda
second domain is a mirror using raid1 via /dev/sda8 and /dev/sdb8. The
swap will be a normal partition.
And the third domain will be a stripe via raid0 with /dev/sda5
and /dev/sdb5
Now, so far, I've already setup the stripe and it's not exceptoinally
fast - using hdparm, I'm only pulling some 12Mb/sec with it, where as on
domain0, I pull 124Mb/sec off that stripe set. This could be the way
that the xenU domains interact, I don't know.
I think I'll try Bonnie+ to get some "real" numbers, but I thought I'd
post that and see what kind of response I get, cause something seems
wrong here.
Let me know if there's something else I should be doing to make perf
numbers come into place.
Thanks,
--
Jack Downes <jack@xxxxxxxxxxxxxxxxxxxx>
Chain Reaction Web
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home