Re: [Xen-research] Source code compiling and booting issue with xen 3.3.0 in fedora 8 system

[Abhay Bhadani <abhadani@xxxxxxxxx>]

Thanks for the reply. But i looked in /etc/modprobe.conf file. there is no such thing.

[root@localhost etc]# cat /etc/modprobe.conf
alias eth0 e100
alias scsi_hostadapter libata
alias scsi_hostadapter1 ata_piix
alias snd-card-0 snd-intel8x0
options snd-card-0 index=0
options snd-intel8x0 index=0
[root@localhost etc]# 

I also saw related directories and files like modprobe.d/ but couldn't find out.

do u mean to say that  /xen-3.3.0/build-linux-2.6.18-xen_x86_32/ contains this file. but i was unable to find modprobe.conf inside xen-3.3.0 directory.

I m still facing the same problem.

Any more suggestions.

Thanks,
Abhay

On Wed, Mar 4, 2009 at 6:42 PM, John Krautheim <jkrautheim@xxxxxxxxx> wrote:

Are you sure the initrd made correctly? It has the initial drivers to read your drive. Xen is booting, so you probably not getting the right drivers to start your OS. If you didn't modify the modprobe.conf file, it probably had a alias for ata-generic, which is not supported under the 2.6.18 kernel. Change the ata-generic to ahci and remake your initrd file.

Also, unless your using aacraid, sd_mod, and scsi_mod, you can delete those from your initrd file as well. The mkinitrd will include the modules you need.

Hope this helps.

John Krautheim, CISSP, PMP
jkrautheim@xxxxxxxxx

On Wed, Mar 4, 2009 at 7:12 AM, Abhay Bhadani <abhadani@xxxxxxxxx> wrote:

Hi All,

   I am trying to compile Xen 3.3.0 source code which downloads updates from mercurial repository.

   I am trying to modify the CPU scheduler, but before i make any changes i need to test it by installing it from source.

OS: Fedora 8 Linux

I compiled the source code by using

[root@localhost xen-3.3.0]# make world
[root@localhost xen-3.3.0]# make install
[root@localhost xen-3.3.0]# depmod 2.6.18.8-xen
[root@localhost xen-3.3.0]# mkinitrd -v -f --with=aacraid --with=sd_mod --with=scsi_mod initrd-2.6.18.8-xen.img 2.6.18.8-xen

then i moved "initrd-2.6.18.8-xen.img" to /boot

edited the grub.conf

title WindowsXP
        rootnoverify (hd0,0)
        chainloader +1

title Fedora-base (2.6.23.1-42.fc8)
        root (hd0,5)
        kernel /vmlinuz-2.6.23.1-42.fc8 ro root=LABEL=/ rhgb quiet
        initrd /initrd-2.6.23.1-42.fc8.img
title Fedora (2.6.21-2950.fc8xen)
        root (hd0,5)
        kernel /xen.gz-2.6.21-2950.fc8
        module /vmlinuz-2.6.21-2950.fc8xen ro root=LABEL=/ rhgb quiet
        module /initrd-2.6.21-2950.fc8xen.img

title Source Compiled Xen - 3rd March 2009 (2.6.18.8-xen)
        root (hd0,5)
        kernel /xen-3.3.0.gz
        #module /vmlinuz-2.6.18.8-xen ro root=/dev/sda8 console=tty0 1
        module /vmlinuz-2.6.18.8-xen ro root=LABEL=/ console=tty0
        module /initrd-2.6.18.8-xen.img

When i select 4th option, i get these messages while booting,

(XEN) *** LOADING DOMAIN 0 ***
.
.
.
(XEN) Dom0 has maximum 1 VCPUs
(XEN) Initrd len 0x6e8600, start ar 0xc0460000
(XEN) Scrubbing Free RAM: .........done.
(XEN) Xen trace buffers: disabled
Red Hat nash version 6.0.19 starting
mount: could not find filesystem '/dev/root'
setuproot: moving /dev failed: No such file or directory
setuproot: error mounting /proc : No such file or directory
setuproot: error mounting /sys : No such file or directory
switchroot: mount failed: No such file or directory


After this the system hangs....

it seems it is unable to mount root filesystem. What changes needs to be done to make things work.

Any suggestions.

Thanks in advance.

Regards,
Abhay Bhadani

_______________________________________________
Xen-research mailing list
Xen-research@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/mailman/listinfo/xen-research

_______________________________________________
Xen-research mailing list
Xen-research@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/mailman/listinfo/xen-research