Xen IA64 port developers (thread)
[Xen-ia64-devel][PATCH] SMBios table support in XEN, Zhang, Xing Z, 2007/08/23
- Re: [Xen-ia64-devel][PATCH] SMBios table support in XEN, Alex Williamson, 2007/08/23
- RE: [Xen-ia64-devel][PATCH] SMBios table support in XEN, Zhang, Xing Z, 2007/08/23
- RE: [Xen-ia64-devel][PATCH] SMBios table support in XEN, Alex Williamson, 2007/08/24
- RE: [Xen-ia64-devel][PATCH] SMBios table support in XEN, Zhang, Xing Z, 2007/08/24
- RE: [Xen-ia64-devel][PATCH] SMBios table support in XEN, Alex Williamson, 2007/08/27
- RE: [Xen-ia64-devel][PATCH] SMBios table support in XEN, Zhang, Xing Z, 2007/08/30
- RE: [Xen-ia64-devel][PATCH] SMBios table support in XEN, Zhang, Xing Z, 2007/08/23
- RE: [Xen-ia64-devel][PATCH] SMBios table support in XEN, Zhang, Xing Z, 2007/08/24
[Xen-ia64-devel] [BUG]Dom0 panic if "dom0_mem" field is not explicitly set in elilo.conf, Zhang, Xing Z, 2007/08/22
- Re: [Xen-ia64-devel] [BUG]Dom0 panic if "dom0_mem" field is notexplicitly set in elilo.conf, Masaki Kanno, 2007/08/23
- Re: [Xen-ia64-devel] [BUG]Dom0 panic if "dom0_mem" field is not explicitly set in elilo.conf, Alex Williamson, 2007/08/23
- Re: [Xen-ia64-devel] [BUG]Dom0 panic if "dom0_mem" field is not explicitly set in elilo.conf, Jarod Wilson, 2007/08/23
- RE: [Xen-ia64-devel] [BUG]Dom0 panic if "dom0_mem" field is notexplicitly set in elilo.conf, Zhang, Xing Z, 2007/08/23
- Re: [Xen-ia64-devel] [BUG]Dom0 panic if "dom0_mem" field is notexplicitly set in elilo.conf, Jarod Wilson, 2007/08/23
- RE: [Xen-ia64-devel] [BUG]Dom0 panic if "dom0_mem" field is notexplicitly set in elilo.conf, Zhang, Xing Z, 2007/08/23
- Re: [Xen-ia64-devel] [BUG]Dom0 panic if "dom0_mem" field is notexplicitly set in elilo.conf, Jarod Wilson, 2007/08/24
- RE: [Xen-ia64-devel] [BUG]Dom0 panic if "dom0_mem" field is notexplicitly set in elilo.conf, Zhang, Xing Z, 2007/08/26
[Xen-ia64-devel] [rfc 00/16] Kexec v20070717: Linux-Xen, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 03/16] Initialise xen_start_info earlier in setup_arch(), Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 02/16] statically allocate xen_phys_cpus, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 09/16] Update default config to enable kexec, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 04/16] IA64 Kexec/kdump, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 06/16] Kexec/Kdump: honour non-zero crashkernel offset, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 01/16] sysctl: implement CTL_UNNUMBERED, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 07/16] Kexec: Call xen_machine_kexec_register_resources, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 08/16] kexec/kdump: Minor enhancement to includes in crash.c, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 05/16] CONFIG_KEXEC/CONFIG_CRASH_DUMP permutations, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 11/16] Date: Thu, 12 Jul 2007 15:50:37 +0900 Subkect: Kexec: machine addresss macros From: Simon Horman <horms@xxxxxxxxxxxx>, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 14/16] Kdump: Add /proc/iomem_machine, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 15/16] Kexec: Purge the VHPT entry in the TLB on kexec, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 13/16] Kdump: Use the machine address for the boot params region, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 12/16] Kdump: pass control page to hypervisor, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 16/16] Kexec: Add xen_limit_pages_to_max_mfn(), Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 10/16] Kexec: Use xen machine_kexec() and machine_shutdown(), Simon Horman, 2007/08/17
[Xen-ia64-devel] [rfc 00/15] Kexec v20070717: Xen, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 05/15] Kdump: Save dom0_mm_pgd_mfn in vmcore on ia64, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 15/15] Kexec: Map runtime EFI regions the same way as Linux, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 03/15] physical mode SAL calls, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 02/15] physical mode SAL calls, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 08/15] Kexec: Save the MADT ACPI tables so that they can be restored, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 10/15] Kexec: Zap VHPT in relocate_kernel, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 07/15] Kexec: partial port of CPU_HOTPLUG, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 04/15] Kdump: Save dom0_mm_pgd_mfn in vmcore on ia64, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 01/15] kexec for xen, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 06/15] Kexec: Add kexec_disable_iosapic, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 12/15] Kexec: map EFI after paging is initilaised, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 13/15] Kexec: offsets for EFI runtime regions, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 11/15] Kexec: Dont "increase" SAL timout to 0, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 09/15] Kexec: Fix ia64_do_tlb_purge so that it works with XEN, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 14/15] Kexec: Allow page fault handler to handle EFI regions, Simon Horman, 2007/08/17
- [Xen-ia64-devel] [rfc 16/15] Kexec v20070717: Xen, Simon Horman, 2007/08/19
[Xen-ia64-devel] [rfc 0/6] Kexec: Map runtime EFI regions the same way as Linux, Simon Horman, 2007/08/16
- [Xen-ia64-devel] [rfc 6/6] Kexec: Map runtime EFI regions the same way as Linux, Simon Horman, 2007/08/16
- [Xen-ia64-devel] [rfc 2/6] physical mode SAL calls, Simon Horman, 2007/08/16
- [Xen-ia64-devel] [rfc 3/6] Kexec: map EFI after paging is initilaised, Simon Horman, 2007/08/16
- [Xen-ia64-devel] [rfc 5/6] Kexec: Allow page fault handler to handle EFI regions, Simon Horman, 2007/08/16
- [Xen-ia64-devel] [rfc 4/6] Kexec: offsets for EFI runtime regions, Simon Horman, 2007/08/16
- [Xen-ia64-devel] [rfc 1/6] physical mode SAL calls, Simon Horman, 2007/08/16
- Re: [Xen-ia64-devel] [rfc 0/6] Kexec: Map runtime EFI regions the same way as Linux, Alex Williamson, 2007/08/16
[Xen-ia64-devel] _OSI(Linux) == false, Alex Williamson, 2007/08/14
- [Xen-ia64-devel] RE: _OSI(Linux) == false, Xu, Anthony, 2007/08/16
- Re: [Xen-ia64-devel] RE: _OSI(Linux) == false, Alex Williamson, 2007/08/17
- RE: [Xen-ia64-devel] RE: _OSI(Linux) == false, Xu, Anthony, 2007/08/18
- RE: [Xen-ia64-devel] RE: _OSI(Linux) == false, Alex Williamson, 2007/08/18
- RE: [Xen-ia64-devel] RE: _OSI(Linux) == false, Xu, Anthony, 2007/08/19
- RE: [Xen-ia64-devel] RE: _OSI(Linux) == false, tgingold, 2007/08/21
- RE: [Xen-ia64-devel] RE: _OSI(Linux) == false, Zhang, Xing Z, 2007/08/21
- RE: [Xen-ia64-devel] RE: _OSI(Linux) == false, Alex Williamson, 2007/08/21
- RE: [Xen-ia64-devel] RE: _OSI(Linux) == false, tgingold, 2007/08/22
- RE: [Xen-ia64-devel] RE: _OSI(Linux) == false, Xu, Anthony, 2007/08/21
- RE: [Xen-ia64-devel] RE: _OSI(Linux) == false, Alex Williamson, 2007/08/21
- RE: [Xen-ia64-devel] RE: _OSI(Linux) == false, Xu, Anthony, 2007/08/21
- RE: [Xen-ia64-devel] RE: _OSI(Linux) == false, Alex Williamson, 2007/08/21
- RE: [Xen-ia64-devel] RE: _OSI(Linux) == false, Xu, Anthony, 2007/08/22
- RE: [Xen-ia64-devel] RE: _OSI(Linux) == false, Zhang, Xing Z, 2007/08/22
- RE: [Xen-ia64-devel] RE: _OSI(Linux) == false, tgingold, 2007/08/22
Re: [XenPPC] Re: [Xen-ia64-devel] [PATCH 1/2] remove xencomm page size limit(xen side), Hollis Blanchard, 2007/08/01
- Re: [XenPPC] Re: [Xen-ia64-devel] [PATCH 1/2] remove xencomm page size limit(xen side), Isaku Yamahata, 2007/08/01
- Re: [XenPPC] Re: [Xen-ia64-devel] [PATCH 1/2] remove xencomm page size limit(xen side), Hollis Blanchard, 2007/08/02
- Re: [XenPPC] Re: [Xen-ia64-devel] [PATCH 1/2] remove xencomm page size limit(xen side), Isaku Yamahata, 2007/08/02
- Re: [XenPPC] Re: [Xen-ia64-devel] [PATCH 1/2] remove xencomm page size limit(xen side), Hollis Blanchard, 2007/08/03
- [Xen-devel] [PATCH] [xen, xencomm] various xencomm fixes (was Re: [XenPPC] Re: [Xen-ia64-devel] [PATCH 1/2] remove xencomm page size limit(xen side)), Isaku Yamahata, 2007/08/07
- [Xen-devel] Re: [PATCH] [xen, xencomm] various xencomm fixes (was Re: [XenPPC] Re: [Xen-ia64-devel] [PATCH 1/2] remove xencomm page size limit(xen side)), Hollis Blanchard, 2007/08/10
- Re: [Xen-devel] Re: [PATCH] [xen, xencomm] various xencomm fixes (was Re: [XenPPC] Re: [Xen-ia64-devel] [PATCH 1/2] remove xencomm page size limit(xen side)), Isaku Yamahata, 2007/08/12
Re: [Xen-ia64-devel] [PATCH] Use saner dom0 memory and vcpu defaults, don't panic on over-allocation, Jarod Wilson, 2007/08/01
- Re: [Xen-ia64-devel] [PATCH] Use saner dom0 memory and vcpu defaults, don't panic on over-allocation, Jarod Wilson, 2007/08/01
- Re: [Xen-ia64-devel] [PATCH] Use saner dom0 memory and vcpu defaults, don't panic on over-allocation, Jarod Wilson, 2007/08/01
- Re: [Xen-ia64-devel] [PATCH] Use saner dom0 memory and vcpu defaults, don't panic on over-allocation, Jarod Wilson, 2007/08/01
- Re: [Xen-ia64-devel] [PATCH] Use saner dom0 memory and vcpu defaults, don't panic on over-allocation, Isaku Yamahata, 2007/08/01
- Re: [Xen-ia64-devel] [PATCH] Use saner dom0 memory and vcpu defaults, don't panic on over-allocation, Jarod Wilson, 2007/08/02
- Re: [Xen-ia64-devel] [PATCH] Use saner dom0 memory and vcpu defaults, don't panic on over-allocation, Jarod Wilson, 2007/08/02
- Re: [Xen-ia64-devel] [PATCH] Use saner dom0 memory and vcpu defaults, don't panic on over-allocation, Jarod Wilson, 2007/08/02
- Re: [Xen-ia64-devel] [PATCH] Use saner dom0 memory and vcpu defaults, don't panic on over-allocation, Jarod Wilson, 2007/08/03
- Re: [Xen-ia64-devel] [PATCH] Use saner dom0 memory and vcpu defaults, don't panic on over-allocation, Jarod Wilson, 2007/08/03
- Re: [Xen-ia64-devel] [PATCH] Use saner dom0 memory and vcpu defaults, don't panic on over-allocation, Alex Williamson, 2007/08/03
- Re: [Xen-ia64-devel] [PATCH] Use saner dom0 memory and vcpu defaults, don't panic on over-allocation, Jarod Wilson, 2007/08/03
- Re: [Xen-ia64-devel] [PATCH] Use saner dom0 memory and vcpu defaults, don't panic on over-allocation, Jarod Wilson, 2007/08/04
- Re: [Xen-ia64-devel] [PATCH] Use saner dom0 memory and vcpu defaults, don't panic on over-allocation, Alex Williamson, 2007/08/06
- Re: [Xen-ia64-devel] [PATCH] Use saner dom0 memory and vcpu defaults, don't panic on over-allocation, Jarod Wilson, 2007/08/06
- Re: [Xen-ia64-devel] [PATCH] Use saner dom0 memory and vcpu defaults, don't panic on over-allocation, Alex Williamson, 2007/08/06
- Re: [Xen-ia64-devel] [PATCH] Use saner dom0 memory and vcpu defaults, don't panic on over-allocation, Jarod Wilson, 2007/08/07
- Re: [Xen-ia64-devel] [PATCH] Use saner dom0 memory and vcpu defaults, don't panic on over-allocation, Alex Williamson, 2007/08/08
|
|