| |
|
 |
|
 |
|
|
|
| |
|
|
xen-ia64-devel
Re: [Xen-ia64-devel] Please try PV-on-HVM on IPF
Sorry, I forgot to write about my test environment.
I tested with xen-ia64-unstable.hg (cs:11810).
I (Doi.Tsunehisa) said:
> Hi all,
>
> I (Doi.Tsunehisa) said:
> > We've ported PV-on-HVM drivers for IPF. But I think that
> > only few tries it. Thus, I try to describe to use it.
> >
> > And I attach several patches about PV-on-HVM.
> >
> > + fix-warning.patch
> > - warning fix for HVM PV driver
> > + notsafe-comment.patch
> > - add not-SMP-safe comment about PV-on-HVM
> > - to take Isaku's suggestion.
> > + pv-backport.patch (preliminary)
> > - current HVM PV driver for only 2.6.16 or 2.6.16.* kernel
> > - this is preliminary patch for backporting to before 2.6.16
> > kernel
> > - we tested only compiling on RHEL4.
>
> Today, I was testing my preliminary patch on RHEL4 U2.
>
> But, xen-platform-pci.ko could not be attached with RHEL4 U2 original
> kernel. Thus I was investigating it. So, I found a strange movement about
> PCI configuration.
>
> I tested on two envrionments, linux-2.6.16.29 and RHEL4 U2 original.
> Outputs of lspci command are same on both environment.
>
> The output is follow:
>
> [Both environment of VT-i domain]
> # lspci -v
> 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev
02)
> Flags: fast devsel
>
> 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II
]
> Flags: medium devsel
>
> 00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton
II] (prog-if 80 [Master])
> Flags: bus master, fast devsel, latency 0
> I/O ports at 1100 [size=16]
>
> 00:02.0 VGA compatible controller: Cirrus Logic GD 5446 (prog-if 00 [VGA]
)
> Flags: bus master, fast devsel, latency 0
> Memory at 00000000c0000000 (32-bit, prefetchable) [size=32M]
> Memory at 00000000c3000000 (32-bit, non-prefetchable) [size=4K]
>
> 00:03.0 Class ff80: Unknown device 5853:0001 (rev 01)
> Flags: fast devsel
> I/O ports at 1000 [disabled] [size=256]
> Memory at 00000000c2000000 (32-bit, prefetchable) [disabled] [siz
e=16M]
>
> There is `Unknown device' in thie message. It's pyseudo-device for
> PV-on-HVM called `xen-platform-pci'.
>
> Next, I showed IO-memory maps with /proc/iomem. But, IO-memory maps
> are different on both environment.
>
> [linux-2.6.16.29 on VT-i domain]
> # cat /proc/iomem
> 00000000-0009ffff : System RAM
> 000a0000-000bffff : reserved
> 000c0000-000fffff : reserved
> 00100000-03ffffff : System RAM
> 04000000-04bf3fff : System RAM
> 04000000-046d34bf : Kernel code
> 046d34c0-04bf373f : Kernel data
> 04bf4000-3c458fff : System RAM
> **** deleted *****
> 3ff70000-3fffdfff : System RAM
> 3fffe000-3fffffff : reserved
> c0000000-c1ffffff : 0000:00:02.0
> c2000000-c2ffffff : 0000:00:03.0
> c3000000-c3000fff : 0000:00:02.0
> e0000000-e033dcf7 : PCI Bus 0000:00 I/O Ports 00000000-00000cf7
> e0340d00-e3ffffff : PCI Bus 0000:00 I/O Ports 00000d00-0000ffff
>
> [RHEL4 U2 on VT-i domain]
> # cat /proc/iomem
> c0000000-c1ffffff : PCI Bus 0000:00
> c0000000-c1ffffff : 0000:00:02.0
> c2000000-c2ffffff : 0000:00:03.0
> c2000000-c2000fff : PCI Bus 0000:00
> c3000000-c3000fff : 0000:00:02.0
>
> On RHEL4 U2 environment, I could show only this message. It's
> strange, and it's the reason that xen-platform-pci.ko module can't
> be attached, I think.
>
> I don't understand what is happend. Does anyone know the reason ?
>
> Thanks,
> - Tsunehisa Doi
>
>
> _______________________________________________
> Xen-ia64-devel mailing list
> Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-ia64-devel
>
_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel
|
|
|
| |
|
Home