The patch below updates ia64 for 2.6.14 for xen-unstable. This is a
pretty trivial merge-up, applying the delta from 2.6.12 versus 2.6.14
for each ia64 specific file. Boots dom0 and domU on an rx2600. Thanks,
Alex
Signed-off-by: Alex Williamson <alex.williamson@xxxxxx>
---
buildconfigs/linux-defconfig_xen0_ia64 | 373 +++++++++++++---------
buildconfigs/linux-defconfig_xenU_ia64 | 355 ++++++++++++--------
linux-2.6-xen-sparse/arch/ia64/Kconfig | 78 +---
linux-2.6-xen-sparse/arch/ia64/Makefile | 19 -
linux-2.6-xen-sparse/arch/ia64/kernel/entry.S | 177 +++++-----
linux-2.6-xen-sparse/arch/ia64/kernel/head.S | 2
linux-2.6-xen-sparse/arch/ia64/kernel/setup.c | 63 +++
linux-2.6-xen-sparse/arch/ia64/xen/xenentry.S | 2
linux-2.6-xen-sparse/arch/ia64/xen/xenivt.S | 2
linux-2.6-xen-sparse/include/asm-ia64/pal.h | 21 +
linux-2.6-xen-sparse/include/asm-ia64/processor.h | 3
linux-2.6-xen-sparse/include/asm-ia64/system.h | 18 -
12 files changed, 639 insertions(+), 474 deletions(-)
diff -r 61e7afb7344b linux-2.6-xen-sparse/arch/ia64/Kconfig
--- a/linux-2.6-xen-sparse/arch/ia64/Kconfig Tue Jan 31 23:56:19 2006
+++ b/linux-2.6-xen-sparse/arch/ia64/Kconfig Wed Feb 1 06:24:41 2006
@@ -97,12 +97,17 @@
bool
default y
+config IA64_UNCACHED_ALLOCATOR
+ bool
+ select GENERIC_ALLOCATOR
+
choice
prompt "System type"
default IA64_GENERIC
config IA64_GENERIC
bool "generic"
+ select ACPI
select NUMA
select ACPI_NUMA
select VIRTUAL_MEM_MAP
@@ -204,6 +209,8 @@
endchoice
+source kernel/Kconfig.hz
+
config IA64_BRL_EMU
bool
depends on ITANIUM
@@ -240,7 +247,7 @@
bool
default y if VIRTUAL_MEM_MAP
-config DISCONTIGMEM
+config ARCH_DISCONTIGMEM_ENABLE
bool "Discontiguous memory support"
depends on (IA64_DIG || IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 ||
IA64_HP_ZX1_SWIOTLB) && NUMA && VIRTUAL_MEM_MAP
default y if (IA64_SGI_SN2 || IA64_GENERIC) && NUMA
@@ -261,16 +268,9 @@
depends on !IA64_HP_SIM
default y
-config IA64_SGI_SN_SIM
- bool "SGI Medusa Simulator Support"
- depends on IA64_SGI_SN2
- help
- If you are compiling a kernel that will run under SGI's IA-64
- simulator (Medusa) then say Y, otherwise say N.
-
config IA64_SGI_SN_XP
tristate "Support communication between SGI SSIs"
- depends on MSPEC
+ select IA64_UNCACHED_ALLOCATOR
help
An SGI machine can be divided into multiple Single System
Images which act independently of each other and have
@@ -343,10 +343,7 @@
Say Y here if you are building a kernel for a desktop, embedded
or real-time system. Say N if you are unsure.
-config HAVE_DEC_LOCK
- bool
- depends on (SMP || PREEMPT)
- default y
+source "mm/Kconfig"
config IA32_SUPPORT
bool "Support for Linux/x86 binaries"
@@ -384,11 +381,6 @@
To use this option, you have to ensure that the "/proc file system
support" (CONFIG_PROC_FS) is enabled, too.
-config ACPI_DEALLOCATE_IRQ
- bool
- depends on IOSAPIC && EXPERIMENTAL
- default y
-
source "drivers/firmware/Kconfig"
source "fs/Kconfig.binfmt"
@@ -397,35 +389,13 @@
menu "Power management and ACPI"
-config PM
- bool "Power Management support"
- depends on !IA64_HP_SIM
- default y
- help
- "Power Management" means that parts of your computer are shut
- off or put into a power conserving "sleep" mode if they are not
- being used. There are two competing standards for doing this: APM
- and ACPI. If you want to use either one, say Y here and then also
- to the requisite support below.
-
- Power Management is most important for battery powered laptop
- computers; if you have a laptop, check out the Linux Laptop home
- page on the WWW at <http://www.linux-on-laptops.com/> and the
- Battery Powered Linux mini-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- Note that, even if you say N here, Linux on the x86 architecture
- will issue the hlt instruction if nothing is to be done, thereby
- sending the processor to sleep and saving power.
-
-config ACPI
- bool
- depends on !IA64_HP_SIM
- default y
-
-if !IA64_HP_SIM
+source "kernel/power/Kconfig"
source "drivers/acpi/Kconfig"
+
+if PM
+
+source "arch/ia64/kernel/cpufreq/Kconfig"
endif
@@ -438,15 +408,8 @@
config PCI
bool "PCI support"
help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
- VESA. If you have PCI, say Y, otherwise N.
-
- The PCI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, contains valuable
- information about which PCI hardware does work under Linux and which
- doesn't.
+ Real IA-64 machines all have PCI/PCI-X/PCI Express busses. Say Y
+ here unless you are using a simulator without PCI support.
config PCI_DOMAINS
bool
@@ -461,6 +424,8 @@
endmenu
endif
+
+source "net/Kconfig"
source "drivers/Kconfig"
@@ -479,6 +444,11 @@
bool
default y
+config GENERIC_PENDING_IRQ
+ bool
+ depends on GENERIC_HARDIRQS && SMP
+ default y
+
source "arch/ia64/hp/sim/Kconfig"
source "arch/ia64/oprofile/Kconfig"
diff -r 61e7afb7344b linux-2.6-xen-sparse/arch/ia64/Makefile
--- a/linux-2.6-xen-sparse/arch/ia64/Makefile Tue Jan 31 23:56:19 2006
+++ b/linux-2.6-xen-sparse/arch/ia64/Makefile Wed Feb 1 06:24:41 2006
@@ -88,24 +88,7 @@
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
-CLEAN_FILES += include/asm-ia64/.offsets.h.stamp vmlinux.gz bootloader
-
-MRPROPER_FILES += include/asm-ia64/offsets.h
-
-prepare: include/asm-ia64/offsets.h
-
-arch/ia64/kernel/asm-offsets.s: include/asm include/linux/version.h
include/config/MARKER
-
-include/asm-ia64/offsets.h: arch/ia64/kernel/asm-offsets.s
- $(call filechk,gen-asm-offsets)
-
-arch/ia64/kernel/asm-offsets.s: include/asm-ia64/.offsets.h.stamp
-
-include/asm-ia64/.offsets.h.stamp:
- mkdir -p include/asm-ia64
- [ -s include/asm-ia64/offsets.h ] \
- || echo "#define IA64_TASK_SIZE 0" > include/asm-ia64/offsets.h
- touch $@
+CLEAN_FILES += vmlinux.gz bootloader
boot: lib/lib.a vmlinux
$(Q)$(MAKE) $(build)=$(boot) $@
diff -r 61e7afb7344b linux-2.6-xen-sparse/arch/ia64/kernel/entry.S
--- a/linux-2.6-xen-sparse/arch/ia64/kernel/entry.S Tue Jan 31 23:56:19 2006
+++ b/linux-2.6-xen-sparse/arch/ia64/kernel/entry.S Wed Feb 1 06:24:41 2006
@@ -37,7 +37,7 @@
#include <asm/cache.h>
#include <asm/errno.h>
#include <asm/kregs.h>
-#include <asm/offsets.h>
+#include <asm/asm-offsets.h>
#include <asm/pgtable.h>
#include <asm/percpu.h>
#include <asm/processor.h>
@@ -204,9 +204,6 @@
(p6) br.cond.dpnt .map
;;
.done:
-(p6) ssm psr.ic // if we had to map, reenable the
psr.ic bit FIRST!!!
- ;;
-(p6) srlz.d
ld8 sp=[r21] // load kernel stack pointer of new task
mov IA64_KR(CURRENT)=in0 // update "current" application register
mov r8=r13 // return pointer to previously running
task
@@ -234,6 +231,9 @@
mov IA64_KR(CURRENT_STACK)=r26 // remember last page we mapped...
;;
itr.d dtr[r25]=r23 // wire in new mapping...
+ ssm psr.ic // reenable the psr.ic bit
+ ;;
+ srlz.d
br.cond.sptk .done
END(__ia64_switch_to)
@@ -470,17 +470,28 @@
br.cond.sptk.many b7
END(load_switch_stack)
-GLOBAL_ENTRY(__ia64_syscall)
- .regstk 6,0,0,0
- mov r15=in5 // put syscall number in place
- break __BREAK_SYSCALL
- movl r2=errno
- cmp.eq p6,p7=-1,r10
- ;;
-(p6) st4 [r2]=r8
-(p6) mov r8=-1
+GLOBAL_ENTRY(prefetch_stack)
+ add r14 = -IA64_SWITCH_STACK_SIZE, sp
+ add r15 = IA64_TASK_THREAD_KSP_OFFSET, in0
+ ;;
+ ld8 r16 = [r15] // load next's stack pointer
+ lfetch.fault.excl [r14], 128
+ ;;
+ lfetch.fault.excl [r14], 128
+ lfetch.fault [r16], 128
+ ;;
+ lfetch.fault.excl [r14], 128
+ lfetch.fault [r16], 128
+ ;;
+ lfetch.fault.excl [r14], 128
+ lfetch.fault [r16], 128
+ ;;
+ lfetch.fault.excl [r14], 128
+ lfetch.fault [r16], 128
+ ;;
+ lfetch.fault [r16], 128
br.ret.sptk.many rp
-END(__ia64_syscall)
+END(prefetch_stack)
GLOBAL_ENTRY(execve)
mov r15=__NR_execve // put syscall number in place
@@ -640,7 +651,7 @@
* r8-r11: restored (syscall return value(s))
* r12: restored (user-level stack pointer)
* r13: restored (user-level thread pointer)
- * r14: cleared
+ * r14: set to __kernel_syscall_via_epc
* r15: restored (syscall #)
* r16-r17: cleared
* r18: user-level b6
@@ -661,7 +672,7 @@
* pr: restored (user-level pr)
* b0: restored (user-level rp)
* b6: restored
- * b7: cleared
+ * b7: set to __kernel_syscall_via_epc
* ar.unat: restored (user-level ar.unat)
* ar.pfs: restored (user-level ar.pfs)
* ar.rsc: restored (user-level ar.rsc)
@@ -707,73 +718,80 @@
;;
(p6) ld4 r31=[r18] // load
current_thread_info()->flags
ld8 r19=[r2],PT(B6)-PT(LOADRS) // load ar.rsc value for
"loadrs"
- mov b7=r0 // clear b7
- ;;
- ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE) // load ar.bspstore (may be
garbage)
+ nop.i 0
+ ;;
+ mov r16=ar.bsp // M2 get existing backing
store pointer
ld8 r18=[r2],PT(R9)-PT(B6) // load b6
(p6) and r15=TIF_WORK_MASK,r31 // any work other than
TIF_SYSCALL_TRACE?
;;
- mov r16=ar.bsp // M2 get existing backing
store pointer
+ ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE) // load ar.bspstore (may be
garbage)
(p6) cmp4.ne.unc p6,p0=r15, r0 // any special work pending?
(p6) br.cond.spnt .work_pending_syscall
;;
// start restoring the state saved on the kernel stack (struct pt_regs):
ld8 r9=[r2],PT(CR_IPSR)-PT(R9)
ld8 r11=[r3],PT(CR_IIP)-PT(R11)
- mov f6=f0 // clear f6
+(pNonSys) break 0 // bug check: we shouldn't be here if
pNonSys is TRUE!
;;
invala // M0|1 invalidate ALAT
- rsm psr.i | psr.ic // M2 initiate turning off of interrupt and
interruption collection
- mov f9=f0 // clear f9
-
- ld8 r29=[r2],16 // load cr.ipsr
- ld8 r28=[r3],16 // load cr.iip
- mov f8=f0 // clear f8
+ rsm psr.i | psr.ic // M2 turn off interrupts and interruption
collection
+ cmp.eq p9,p0=r0,r0 // A set p9 to indicate that we should
restore cr.ifs
+
+ ld8 r29=[r2],16 // M0|1 load cr.ipsr
+ ld8 r28=[r3],16 // M0|1 load cr.iip
+ mov r22=r0 // A clear r22
;;
ld8 r30=[r2],16 // M0|1 load cr.ifs
ld8 r25=[r3],16 // M0|1 load ar.unat
- cmp.eq p9,p0=r0,r0 // set p9 to indicate that we should restore
cr.ifs
+(pUStk) add r14=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13
;;
ld8 r26=[r2],PT(B0)-PT(AR_PFS) // M0|1 load ar.pfs
-(pKStk) mov r22=psr // M2 read PSR now that interrupts are
disabled
- mov f10=f0 // clear f10
- ;;
- ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // load b0
- ld8 r27=[r3],PT(PR)-PT(AR_RSC) // load ar.rsc
- mov f11=f0 // clear f11
- ;;
- ld8 r24=[r2],PT(AR_FPSR)-PT(AR_RNAT) // load ar.rnat (may be garbage)
- ld8 r31=[r3],PT(R1)-PT(PR) // load predicates
-(pUStk) add r14=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13
- ;;
- ld8 r20=[r2],PT(R12)-PT(AR_FPSR) // load ar.fpsr
- ld8.fill r1=[r3],16 // load r1
-(pUStk) mov r17=1
- ;;
- srlz.d // M0 ensure interruption collection is off
- ld8.fill r13=[r3],16
- mov f7=f0 // clear f7
- ;;
- ld8.fill r12=[r2] // restore r12 (sp)
- mov.m ar.ssd=r0 // M2 clear ar.ssd
- mov r22=r0 // clear r22
-
- ld8.fill r15=[r3] // restore r15
-(pUStk) st1 [r14]=r17
- addl r3=THIS_CPU(ia64_phys_stacked_size_p8),r0
- ;;
-(pUStk) ld4 r17=[r3] // r17 = cpu_data->phys_stacked_size_p8
- mov.m ar.csd=r0 // M2 clear ar.csd
- mov b6=r18 // I0 restore b6
- ;;
- mov r14=r0 // clear r14
- shr.u r18=r19,16 // I0|1 get byte size of existing "dirty"
partition
-(pKStk) br.cond.dpnt.many skip_rbs_switch
-
- mov.m ar.ccv=r0 // clear ar.ccv
-(pNonSys) br.cond.dpnt.many dont_preserve_current_frame
- br.cond.sptk.many rbs_switch
-END(__ia64_leave_syscall)
+(pKStk) mov r22=psr // M2 read PSR now that
interrupts are disabled
+ nop 0
+ ;;
+ ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // M0|1 load b0
+ ld8 r27=[r3],PT(PR)-PT(AR_RSC) // M0|1 load ar.rsc
+ mov f6=f0 // F clear f6
+ ;;
+ ld8 r24=[r2],PT(AR_FPSR)-PT(AR_RNAT) // M0|1 load ar.rnat (may be
garbage)
+ ld8 r31=[r3],PT(R1)-PT(PR) // M0|1 load predicates
+ mov f7=f0 // F clear f7
+ ;;
+ ld8 r20=[r2],PT(R12)-PT(AR_FPSR) // M0|1 load ar.fpsr
+ ld8.fill r1=[r3],16 // M0|1 load r1
+(pUStk) mov r17=1 // A
+ ;;
+(pUStk) st1 [r14]=r17 // M2|3
+ ld8.fill r13=[r3],16 // M0|1
+ mov f8=f0 // F clear f8
+ ;;
+ ld8.fill r12=[r2] // M0|1 restore r12 (sp)
+ ld8.fill r15=[r3] // M0|1 restore r15
+ mov b6=r18 // I0 restore b6
+
+ addl r17=THIS_CPU(ia64_phys_stacked_size_p8),r0 // A
+ mov f9=f0 // F clear f9
+(pKStk) br.cond.dpnt.many skip_rbs_switch // B
+
+ srlz.d // M0 ensure interruption collection
is off (for cover)
+ shr.u r18=r19,16 // I0|1 get byte size of existing
"dirty" partition
+ cover // B add current frame into dirty
partition & set cr.ifs
+ ;;
+(pUStk) ld4 r17=[r17] // M0|1 r17 =
cpu_data->phys_stacked_size_p8
+ mov r19=ar.bsp // M2 get new backing store pointer
+ mov f10=f0 // F clear f10
+
+ nop.m 0
+ movl r14=__kernel_syscall_via_epc // X
+ ;;
+ mov.m ar.csd=r0 // M2 clear ar.csd
+ mov.m ar.ccv=r0 // M2 clear ar.ccv
+ mov b7=r14 // I0 clear b7 (hint with
__kernel_syscall_via_epc)
+
+ mov.m ar.ssd=r0 // M2 clear ar.ssd
+ mov f11=f0 // F clear f11
+ br.cond.sptk.many rbs_switch // B
+END(ia64_leave_syscall)
#ifdef CONFIG_IA32_SUPPORT
GLOBAL_ENTRY(ia64_ret_from_ia32_execve)
@@ -891,7 +909,7 @@
ldf.fill f7=[r2],PT(F11)-PT(F7)
ldf.fill f8=[r3],32
;;
- srlz.i // ensure interruption collection is off
+ srlz.d // ensure that inter. collection is off (VHPT is don't care,
since text is pinned)
mov ar.ccv=r15
;;
ldf.fill f11=[r2]
@@ -951,11 +969,10 @@
* NOTE: alloc, loadrs, and cover can't be predicated.
*/
(pNonSys) br.cond.dpnt dont_preserve_current_frame
-
+ cover // add current frame into dirty
partition and set cr.ifs
+ ;;
+ mov r19=ar.bsp // get new backing store pointer
rbs_switch:
- cover // add current frame into dirty
partition and set cr.ifs
- ;;
- mov r19=ar.bsp // get new backing store pointer
sub r16=r16,r18 // krbs = old bsp - size of dirty
partition
cmp.ne p9,p0=r0,r0 // clear p9 to skip restore of cr.ifs
;;
@@ -1030,14 +1047,14 @@
mov loc5=0
mov loc6=0
mov loc7=0
-(pRecurse) br.call.sptk.few b0=rse_clear_invalid
+(pRecurse) br.call.dptk.few b0=rse_clear_invalid
;;
mov loc8=0
mov loc9=0
cmp.ne pReturn,p0=r0,in1 // if recursion count != 0, we need to
do a br.ret
mov loc10=0
mov loc11=0
-(pReturn) br.ret.sptk.many b0
+(pReturn) br.ret.dptk.many b0
#endif /* !CONFIG_ITANIUM */
# undef pRecurse
# undef pReturn
@@ -1261,7 +1278,7 @@
stf.spill [r17]=f11
adds out0=16,sp // out0 = &sigscratch
br.call.sptk.many rp=ia64_rt_sigreturn
-.ret19: .restore sp 0
+.ret19: .restore sp,0
adds sp=16,sp
;;
ld8 r9=[sp] // load new ar.unat
@@ -1583,11 +1600,11 @@
data8 sys_add_key
data8 sys_request_key
data8 sys_keyctl
+ data8 sys_ioprio_set
+ data8 sys_ioprio_get // 1275
data8 sys_ni_syscall
- data8 sys_ni_syscall // 1275
- data8 sys_ni_syscall
- data8 sys_ni_syscall
- data8 sys_ni_syscall
- data8 sys_ni_syscall
+ data8 sys_inotify_init
+ data8 sys_inotify_add_watch
+ data8 sys_inotify_rm_watch
.org sys_call_table + 8*NR_syscalls // guard against failures to
increase NR_syscalls
diff -r 61e7afb7344b linux-2.6-xen-sparse/arch/ia64/kernel/head.S
--- a/linux-2.6-xen-sparse/arch/ia64/kernel/head.S Tue Jan 31 23:56:19 2006
+++ b/linux-2.6-xen-sparse/arch/ia64/kernel/head.S Wed Feb 1 06:24:41 2006
@@ -25,7 +25,7 @@
#include <asm/fpu.h>
#include <asm/kregs.h>
#include <asm/mmu_context.h>
-#include <asm/offsets.h>
+#include <asm/asm-offsets.h>
#include <asm/pal.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
diff -r 61e7afb7344b linux-2.6-xen-sparse/arch/ia64/kernel/setup.c
--- a/linux-2.6-xen-sparse/arch/ia64/kernel/setup.c Tue Jan 31 23:56:19 2006
+++ b/linux-2.6-xen-sparse/arch/ia64/kernel/setup.c Wed Feb 1 06:24:41 2006
@@ -20,6 +20,7 @@
* 02/01/00 R.Seth fixed get_cpuinfo for SMP
* 01/07/99 S.Eranian added the support for command line argument
* 06/24/99 W.Drummond added boot_cpu_data.
+ * 05/28/05 Z. Menyhart Dynamic stride size for "flush_icache_range()"
*/
#include <linux/config.h>
#include <linux/module.h>
@@ -40,6 +41,8 @@
#include <linux/serial_core.h>
#include <linux/efi.h>
#include <linux/initrd.h>
+#include <linux/platform.h>
+#include <linux/pm.h>
#include <asm/ia32.h>
#include <asm/machvec.h>
@@ -72,6 +75,8 @@
unsigned long ia64_cycles_per_usec;
struct ia64_boot_param *ia64_boot_param;
struct screen_info screen_info;
+unsigned long vga_console_iobase;
+unsigned long vga_console_membase;
unsigned long ia64_max_cacheline_size;
unsigned long ia64_iobase; /* virtual address for I/O accesses */
@@ -79,6 +84,13 @@
struct io_space io_space[MAX_IO_SPACES];
EXPORT_SYMBOL(io_space);
unsigned int num_io_spaces;
+
+/*
+ * "flush_icache_range()" needs to know what processor dependent stride size
to use
+ * when it makes i-cache(s) coherent with d-caches.
+ */
+#define I_CACHE_STRIDE_SHIFT 5 /* Safest way to go: 32 bytes
by 32 bytes */
+unsigned long ia64_i_cache_stride_shift = ~0;
/*
* The merge_mask variable needs to be set to (max(iommu_page_size(iommu)) -
1). This
@@ -273,26 +285,29 @@
static inline int __init
early_console_setup (char *cmdline)
{
+ int earlycons = 0;
+
#ifdef CONFIG_XEN
- if (!early_xen_console_setup(cmdline)) return 0;
+ if (!early_xen_console_setup(cmdline))
+ earlycons++;
#endif
#ifdef CONFIG_SERIAL_SGI_L1_CONSOLE
{
extern int sn_serial_console_early_setup(void);
if (!sn_serial_console_early_setup())
- return 0;
+ earlycons++;
}
#endif
#ifdef CONFIG_EFI_PCDP
if (!efi_setup_pcdp_console(cmdline))
- return 0;
+ earlycons++;
#endif
#ifdef CONFIG_SERIAL_8250_CONSOLE
if (!early_serial_console_init(cmdline))
- return 0;
-#endif
-
- return -1;
+ earlycons++;
+#endif
+
+ return (earlycons) ? 0: -1;
}
static inline void
@@ -373,7 +388,7 @@
if (early_console_setup(*cmdline_p) == 0)
mark_bsp_online();
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
/* Initialize the ACPI boot-time table parser */
acpi_table_init();
# ifdef CONFIG_ACPI_NUMA
@@ -409,7 +424,7 @@
cpu_init(); /* initialize the bootstrap CPU */
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
acpi_boot_init();
#endif
@@ -625,6 +640,12 @@
/* start_kernel() requires this... */
}
+/*
+ * Calculate the max. cache line size.
+ *
+ * In addition, the minimum of the i-cache stride sizes is calculated for
+ * "flush_icache_range()".
+ */
static void
get_max_cacheline_size (void)
{
@@ -638,6 +659,8 @@
printk(KERN_ERR "%s: ia64_pal_cache_summary() failed
(status=%ld)\n",
__FUNCTION__, status);
max = SMP_CACHE_BYTES;
+ /* Safest setup for "flush_icache_range()" */
+ ia64_i_cache_stride_shift = I_CACHE_STRIDE_SHIFT;
goto out;
}
@@ -646,14 +669,31 @@
&cci);
if (status != 0) {
printk(KERN_ERR
- "%s: ia64_pal_cache_config_info(l=%lu) failed
(status=%ld)\n",
+ "%s: ia64_pal_cache_config_info(l=%lu, 2) failed
(status=%ld)\n",
__FUNCTION__, l, status);
max = SMP_CACHE_BYTES;
+ /* The safest setup for "flush_icache_range()" */
+ cci.pcci_stride = I_CACHE_STRIDE_SHIFT;
+ cci.pcci_unified = 1;
}
line_size = 1 << cci.pcci_line_size;
if (line_size > max)
max = line_size;
- }
+ if (!cci.pcci_unified) {
+ status = ia64_pal_cache_config_info(l,
+ /* cache_type
(instruction)= */ 1,
+ &cci);
+ if (status != 0) {
+ printk(KERN_ERR
+ "%s: ia64_pal_cache_config_info(l=%lu, 1)
failed (status=%ld)\n",
+ __FUNCTION__, l, status);
+ /* The safest setup for "flush_icache_range()"
*/
+ cci.pcci_stride = I_CACHE_STRIDE_SHIFT;
+ }
+ }
+ if (cci.pcci_stride < ia64_i_cache_stride_shift)
+ ia64_i_cache_stride_shift = cci.pcci_stride;
+ }
out:
if (max > ia64_max_cacheline_size)
ia64_max_cacheline_size = max;
@@ -782,6 +822,7 @@
/* size of physical stacked register partition plus 8 bytes: */
__get_cpu_var(ia64_phys_stacked_size_p8) = num_phys_stacked*8 + 8;
platform_cpu_init();
+ pm_idle = default_idle;
}
void
diff -r 61e7afb7344b linux-2.6-xen-sparse/arch/ia64/xen/xenentry.S
--- a/linux-2.6-xen-sparse/arch/ia64/xen/xenentry.S Tue Jan 31 23:56:19 2006
+++ b/linux-2.6-xen-sparse/arch/ia64/xen/xenentry.S Wed Feb 1 06:24:41 2006
@@ -14,7 +14,7 @@
#include <asm/cache.h>
#include <asm/errno.h>
#include <asm/kregs.h>
-#include <asm/offsets.h>
+#include <asm/asm-offsets.h>
#include <asm/pgtable.h>
#include <asm/percpu.h>
#include <asm/processor.h>
diff -r 61e7afb7344b linux-2.6-xen-sparse/arch/ia64/xen/xenivt.S
--- a/linux-2.6-xen-sparse/arch/ia64/xen/xenivt.S Tue Jan 31 23:56:19 2006
+++ b/linux-2.6-xen-sparse/arch/ia64/xen/xenivt.S Wed Feb 1 06:24:41 2006
@@ -35,7 +35,7 @@
#include <asm/break.h>
#include <asm/ia32.h>
#include <asm/kregs.h>
-#include <asm/offsets.h>
+#include <asm/asm-offsets.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/ptrace.h>
diff -r 61e7afb7344b linux-2.6-xen-sparse/include/asm-ia64/pal.h
--- a/linux-2.6-xen-sparse/include/asm-ia64/pal.h Tue Jan 31 23:56:19 2006
+++ b/linux-2.6-xen-sparse/include/asm-ia64/pal.h Wed Feb 1 06:24:41 2006
@@ -75,6 +75,8 @@
#define PAL_CACHE_READ 259 /* read tag & data of cacheline for
diagnostic testing */
#define PAL_CACHE_WRITE 260 /* write tag & data of
cacheline for diagnostic testing */
#define PAL_VM_TR_READ 261 /* read contents of translation
register */
+#define PAL_GET_PSTATE 262 /* get the current P-state */
+#define PAL_SET_PSTATE 263 /* set the P-state */
#ifndef __ASSEMBLY__
@@ -1112,6 +1114,25 @@
return iprv.status;
}
+/* Get the current P-state information */
+static inline s64
+ia64_pal_get_pstate (u64 *pstate_index)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL_STK(iprv, PAL_GET_PSTATE, 0, 0, 0);
+ *pstate_index = iprv.v0;
+ return iprv.status;
+}
+
+/* Set the P-state */
+static inline s64
+ia64_pal_set_pstate (u64 pstate_index)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL_STK(iprv, PAL_SET_PSTATE, pstate_index, 0, 0);
+ return iprv.status;
+}
+
/* Cause the processor to enter LIGHT HALT state, where prefetching and
execution are
* suspended, but cache and TLB coherency is maintained.
*/
diff -r 61e7afb7344b linux-2.6-xen-sparse/include/asm-ia64/processor.h
--- a/linux-2.6-xen-sparse/include/asm-ia64/processor.h Tue Jan 31 23:56:19 2006
+++ b/linux-2.6-xen-sparse/include/asm-ia64/processor.h Wed Feb 1 06:24:41 2006
@@ -20,9 +20,6 @@
#include <asm/ptrace.h>
#include <asm/ustack.h>
#include <asm/privop.h>
-
-/* Our arch specific arch_init_sched_domain is in arch/ia64/kernel/domain.c */
-#define ARCH_HAS_SCHED_DOMAIN
#define IA64_NUM_DBG_REGS 8
/*
diff -r 61e7afb7344b linux-2.6-xen-sparse/include/asm-ia64/system.h
--- a/linux-2.6-xen-sparse/include/asm-ia64/system.h Tue Jan 31 23:56:19 2006
+++ b/linux-2.6-xen-sparse/include/asm-ia64/system.h Wed Feb 1 06:24:41 2006
@@ -19,12 +19,13 @@
#include <asm/pal.h>
#include <asm/percpu.h>
-#define GATE_ADDR __IA64_UL_CONST(0xa000000000000000)
+#define GATE_ADDR RGN_BASE(RGN_GATE)
+
/*
* 0xa000000000000000+2*PERCPU_PAGE_SIZE
* - 0xa000000000000000+3*PERCPU_PAGE_SIZE remain unmapped (guard page)
*/
-#define KERNEL_START __IA64_UL_CONST(0xa000000100000000)
+#define KERNEL_START (GATE_ADDR+0x100000000)
#define PERCPU_ADDR (-PERCPU_PAGE_SIZE)
#ifndef __ASSEMBLY__
@@ -183,8 +184,6 @@
#ifdef __KERNEL__
-#define prepare_to_switch() do { } while(0)
-
#ifdef CONFIG_IA32_SUPPORT
# define IS_IA32_PROCESS(regs) (ia64_psr(regs)->is != 0)
#else
@@ -274,14 +273,9 @@
* of that CPU which will not be released, because there we wait for the
* tasklist_lock to become available.
*/
-#define prepare_arch_switch(rq, next) \
-do { \
- spin_lock(&(next)->switch_lock); \
- spin_unlock(&(rq)->lock); \
-} while (0)
-#define finish_arch_switch(rq, prev) spin_unlock_irq(&(prev)->switch_lock)
-#define task_running(rq, p) ((rq)->curr == (p) ||
spin_is_locked(&(p)->switch_lock))
-
+#define __ARCH_WANT_UNLOCKED_CTXSW
+
+#define ARCH_HAS_PREFETCH_SWITCH_STACK
#define ia64_platform_is(x) (strcmp(x, platform_name) == 0)
void cpu_idle_wait(void);
diff -r 61e7afb7344b buildconfigs/linux-defconfig_xen0_ia64
--- a/buildconfigs/linux-defconfig_xen0_ia64 Tue Jan 31 23:56:19 2006
+++ b/buildconfigs/linux-defconfig_xen0_ia64 Wed Feb 1 07:16:13 2006
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12.6-xen0
-# Wed Dec 21 11:17:02 2005
+# Linux kernel version: 2.6.14-xen0
+# Wed Feb 1 07:13:54 2006
#
#
@@ -16,6 +16,7 @@
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -28,6 +29,7 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
@@ -89,29 +91,40 @@
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
# CONFIG_NUMA is not set
-CONFIG_VIRTUAL_MEM_MAP=n
+# CONFIG_VIRTUAL_MEM_MAP is not set
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
CONFIG_FORCE_MAX_ZONEORDER=18
CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_HOTPLUG_CPU=y
# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_IA32_SUPPORT is not set
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
-CONFIG_ACPI_DEALLOCATE_IRQ=y
#
# Firmware Drivers
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
@@ -119,35 +132,34 @@
# Power management and ACPI
#
CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
CONFIG_ACPI=y
-
-#
-# ACPI (Advanced Configuration and Power Interface) Support
-#
-CONFIG_ACPI_BOOT=y
-CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_BUTTON=y
-# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
-# CONFIG_ACPI_HOTPLUG_CPU is not set
+CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
CONFIG_ACPI_POWER=y
-CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
-# CONFIG_ACPI_CONTAINER is not set
+CONFIG_ACPI_CONTAINER=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
@@ -166,6 +178,95 @@
# CONFIG_PCCARD is not set
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+CONFIG_IP_NF_ARPTABLES=y
+# CONFIG_IP_NF_ARPFILTER is not set
+# CONFIG_IP_NF_ARP_MANGLE is not set
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=y
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
# Device Drivers
#
@@ -174,8 +275,13 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
@@ -209,7 +315,6 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -264,6 +369,7 @@
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -281,6 +387,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -293,6 +400,7 @@
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -307,6 +415,7 @@
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
#
# SCSI low-level drivers
@@ -320,6 +429,7 @@
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -342,6 +452,7 @@
CONFIG_SCSI_QLA2300=y
CONFIG_SCSI_QLA2322=y
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -358,7 +469,10 @@
# Fusion MPT device support
#
CONFIG_FUSION=y
-CONFIG_FUSION_MAX_SGE=40
+CONFIG_FUSION_SPI=y
+# CONFIG_FUSION_FC is not set
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
#
@@ -372,92 +486,8 @@
# CONFIG_I2O is not set
#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-CONFIG_IP_NF_ARPTABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+# Network device support
+#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
@@ -478,12 +508,18 @@
# CONFIG_ARCNET_COM20020 is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
@@ -499,6 +535,7 @@
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
@@ -530,6 +567,8 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
@@ -538,6 +577,7 @@
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -562,6 +602,10 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
@@ -630,9 +674,7 @@
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
-# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
-# CONFIG_GAMEPORT_CS461X is not set
#
# Character devices
@@ -642,6 +684,7 @@
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
@@ -660,7 +703,6 @@
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
@@ -699,6 +741,8 @@
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
@@ -732,7 +776,6 @@
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
@@ -748,14 +791,38 @@
# CONFIG_I2C_PCA_ISA is not set
#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
@@ -774,34 +841,23 @@
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
#
#
@@ -874,6 +930,7 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
@@ -915,6 +972,7 @@
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
@@ -926,11 +984,12 @@
CONFIG_SND_MTPAV=y
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
#
# PCI devices
#
-CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
CONFIG_SND_ATIIXP=y
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -951,9 +1010,10 @@
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
@@ -997,7 +1057,6 @@
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
-# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_TVMIXER is not set
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_FORTE is not set
@@ -1027,6 +1086,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -1036,9 +1096,8 @@
#
# USB Device Class drivers
#
-CONFIG_USB_AUDIO=y
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
@@ -1055,6 +1114,7 @@
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
#
# USB Input Devices
@@ -1065,12 +1125,17 @@
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
@@ -1126,10 +1191,11 @@
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
#
@@ -1146,6 +1212,10 @@
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
@@ -1154,6 +1224,7 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -1169,22 +1240,20 @@
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=y
CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -1211,14 +1280,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
+# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -1242,15 +1307,18 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
@@ -1265,6 +1333,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1334,10 +1403,12 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# Profiling support
@@ -1351,6 +1422,7 @@
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=20
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1358,6 +1430,7 @@
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
CONFIG_IA64_PRINT_HAZARDS=y
diff -r 61e7afb7344b buildconfigs/linux-defconfig_xenU_ia64
--- a/buildconfigs/linux-defconfig_xenU_ia64 Tue Jan 31 23:56:19 2006
+++ b/buildconfigs/linux-defconfig_xenU_ia64 Wed Feb 1 07:16:20 2006
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12
-# Thu Sep 15 11:04:33 2005
+# Linux kernel version: 2.6.14-xenU
+# Wed Feb 1 07:15:33 2006
#
#
@@ -18,6 +18,7 @@
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@@ -29,6 +30,7 @@
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@@ -68,14 +70,13 @@
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_XEN=y
-CONFIG_XEN_VT=n
CONFIG_ARCH_XEN=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_PHYSDEV_ACCESS=y
CONFIG_XEN_BLKDEV_GRANT=y
CONFIG_XEN_BLKDEV_FRONTEND=y
-CONFIG_VGA_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=n
+# CONFIG_XEN_VT is not set
+# CONFIG_VT is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
@@ -89,30 +90,41 @@
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
# CONFIG_NUMA is not set
CONFIG_VIRTUAL_MEM_MAP=y
CONFIG_HOLES_IN_ZONE=y
# CONFIG_IA64_CYCLONE is not set
CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
CONFIG_FORCE_MAX_ZONEORDER=18
CONFIG_SMP=y
CONFIG_NR_CPUS=16
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_IA32_SUPPORT is not set
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
-CONFIG_ACPI_DEALLOCATE_IRQ=y
#
# Firmware Drivers
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
@@ -120,34 +132,33 @@
# Power management and ACPI
#
CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
CONFIG_ACPI=y
-
-#
-# ACPI (Advanced Configuration and Power Interface) Support
-#
-CONFIG_ACPI_BOOT=y
-CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_BUTTON=y
-# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
CONFIG_ACPI_POWER=y
-CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
@@ -166,6 +177,89 @@
# CONFIG_PCCARD is not set
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+CONFIG_IP_NF_ARPTABLES=y
+# CONFIG_IP_NF_ARPFILTER is not set
+# CONFIG_IP_NF_ARP_MANGLE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
# Device Drivers
#
@@ -176,6 +270,11 @@
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
@@ -209,7 +308,6 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -229,6 +327,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -241,6 +340,7 @@
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -255,6 +355,7 @@
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
#
# SCSI low-level drivers
@@ -269,6 +370,7 @@
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
@@ -283,8 +385,6 @@
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
@@ -295,6 +395,7 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -309,7 +410,10 @@
# Fusion MPT device support
#
CONFIG_FUSION=y
-CONFIG_FUSION_MAX_SGE=40
+CONFIG_FUSION_SPI=y
+# CONFIG_FUSION_FC is not set
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
#
@@ -323,84 +427,8 @@
# CONFIG_I2O is not set
#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-CONFIG_IP_NF_ARPTABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+# Network device support
+#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
@@ -413,12 +441,18 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
@@ -434,6 +468,7 @@
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
@@ -465,6 +500,8 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
@@ -473,6 +510,7 @@
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -497,6 +535,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -547,7 +587,6 @@
#
# Character devices
#
-# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -560,7 +599,6 @@
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
@@ -595,11 +633,12 @@
CONFIG_AGP_HP_ZX1=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
@@ -633,7 +672,6 @@
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
@@ -649,14 +687,38 @@
# CONFIG_I2C_PCA_ISA is not set
#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
@@ -675,34 +737,23 @@
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
#
#
@@ -776,6 +827,7 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_S1D13XXX is not set
@@ -822,11 +874,12 @@
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
#
# PCI devices
#
-CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -847,9 +900,10 @@
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
@@ -901,6 +955,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -910,9 +965,8 @@
#
# USB Device Class drivers
#
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
@@ -928,6 +982,7 @@
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
#
# USB Input Devices
@@ -938,12 +993,17 @@
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
@@ -999,9 +1059,10 @@
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
-
-#
-# USB ATM/DSL drivers
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
#
#
@@ -1018,6 +1079,10 @@
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
@@ -1026,6 +1091,7 @@
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -1035,17 +1101,16 @@
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -1072,14 +1137,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
+# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -1103,15 +1164,18 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
@@ -1121,6 +1185,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1190,10 +1255,12 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# Profiling support
@@ -1207,6 +1274,7 @@
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1214,6 +1282,7 @@
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
CONFIG_IA64_PRINT_HAZARDS=y
_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel
|
Home