RE: [Xen-ia64-devel] Console problem on domU on tip?

["Magenheimer, Dan (HP Labs Fort Collins)" <dan.magenheimer@xxxxxx>]

I have been distracted tracking another bug...

Here's where I got:

The machine is a new (April 2005) HP rx2620 so it is
not old firmware.   I can't reproduce it on a machine
with an ITP (which does have older firmware).

This PAL call is never used in Linux, though there is a
routine coded for it.  It is the only
PAL call coded in Linux that occurs with psr.ic off.

The crash I am seeing occurs either during the PAL call or
immediately upon return.

Is it OK to 


> -----Original Message-----
> From: Xu, Anthony [mailto:anthony.xu@xxxxxxxxx] 
> Sent: Monday, December 19, 2005 2:02 AM
> To: Tian, Kevin; Magenheimer, Dan (HP Labs Fort Collins); 
> xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [Xen-ia64-devel] Console problem on domU on tip?
> 
> Dan,
> Have you got time to verify below discussion?
> 
> Thanks
> -Anthony
> 
> >-----Original Message-----
> >From: Tian, Kevin
> >Sent: 2005年12月16日 10:16
> >To: Xu, Anthony; 'Magenheimer, Dan (HP Labs Fort Collins)';
> >'xen-ia64-devel@xxxxxxxxxxxxxxxxxxx'
> >Subject: RE: [Xen-ia64-devel] Console problem on domU on tip?
> >
> >>From: Xu, Anthony
> >>Sent: 2005年12月16日 9:54
> >>
> >>>Also, why panic if it fails?
> >>>
> >
> >Panic is not required here, and we could just print out a 
> warning message.
> >Previously panic is kept there to help our debug in early stage.
> >
> >>
> >>
> >>>Does the problem happen only on VTI?  Or both VTI and non-VTI on
> >>>split-cache machines?
> >>
> >>Sometimes, it makes domain0 crash at the very beginning of 
> the domain0 boot
> >>process, especially on MP machine.
> >>
> >>
> >>Thanks
> >>-Anthony
> >
> >One complement is, that problem definitely exists on new 
> split-cache processors,
> >for dom0/domU. For VTI domain, we have logic within device 
> model to ensure
> >consistence.
> >
> >Thanks,
> >Kevin
> >>
> >>
> >>>-----Original Message-----
> >>>From: Magenheimer, Dan (HP Labs Fort Collins)
> >>[mailto:dan.magenheimer@xxxxxx]
> >>>Sent: 2005年12月16日 1:39
> >>>To: Tian, Kevin; xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
> >>>Cc: Xu, Anthony
> >>>Subject: RE: [Xen-ia64-devel] Console problem on domU on tip?
> >>>
> >>>> >Is this code fragment necessary for VTI to boot domU
> >>>> >or is it OK to remove?
> >>>>
> >>>>  The comment is inaccurate and it should be domU. That I/D cache
> >>>> sync step is mandatory to boot domU on new IA64 
> processor which has
> >>>> split L2 I/D cache. If without such I/D cache sync, control
> >>>> panel loads
> >>>> domU's kernel image which only affects D side cache. If 
> there're some
> >>>> stale entry on I-side cache within same range of dom0 image,
> >>>> people will
> >>>> see machine going weird.
> >>>
> >>>I don't understand... how can there be stale entries in 
> the I-cache?
> >>>The instructions have just been written to memory (through D-cache)
> >>>and no instructions in this domain have yet been executed.
> >>>I do see that the D-cache needs to be flushed so that memory is
> >>>coherent but are there better ways to do that without a pal call?
> >>>
> >>>>  Normally I/D cache sync shouldn't force any problem. Possibly
> >>>> there's some problem with the pal calling code, like 
> incorrect ITLB
> >>>> mapping for pal or similar issue...
> >>>
> >>>Although the ia64_pal_cache_flush routine is defined in 
> linux's pal.h,
> >>>it doesn't appear to be used anywhere in Linux so there is no use
> >>>model to copy.  I suspect there is some use model for the call that
> >>>we don't understand, for example maybe it should only be 
> called with
> >>>physical &progress?  It definitely fails every time on one of
> >>>my (newer) machines and disabling the pal call makes the problem
> >>>go away.
> >>>
> >>>> Though it's intermittent, please
> >>>> keep this code
> >>>> there for correctness.
> >>>
> >>>Since the call is definitely failing under some circumstances
> >>>that we don't understand, I'm inclined to at least put the code
> >>>in an #ifdef CONFIG_SPLIT_CACHE
> >>>
> >>>Does the problem happen only on VTI?  Or both VTI and non-VTI on
> >>>split-cache machines?
> >>>
> >>>Thanks,
> >>>Dan
> >>>
> >>>P.S. I tried Anthony's patch (which moves the PAL call after
> >>>new_thread()) but it still crashes.
> 

_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel