The old io_apic_eoi() function using the EOI register only works for
IO-APICs with a version of 0x20. Older IO-APICs do not have an EOI
register so line level interrupts have to be EOI'd by flipping the
mode to edge and back, which clears the IRR and Delivery Status bits.
This patch replaces the current io_apic_eoi() function with one which
takes into account the version of the IO-APIC and EOI's
appropriately.
Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
diff -r 0268e7380953 -r 3c5869cb1744 xen/arch/x86/io_apic.c
--- a/xen/arch/x86/io_apic.c Mon Sep 05 15:10:28 2011 +0100
+++ b/xen/arch/x86/io_apic.c Mon Sep 12 11:32:01 2011 +0100
@@ -68,6 +68,13 @@ int __read_mostly nr_ioapics;
#define MAX_PLUS_SHARED_IRQS nr_irqs_gsi
#define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + nr_irqs_gsi)
+
+#define ioapic_has_eoi_reg(apic) (mp_ioapics[(apic)].mpc_apicver >= 0x20)
+
+#define io_apic_eoi_vector(apic, vector) io_apic_eoi((apic), (vector), -1)
+#define io_apic_eoi_pin(apic, pin) io_apic_eoi((apic), -1, (pin))
+
+
/*
* This is performance-critical, we want to do it O(1)
*
@@ -208,6 +215,127 @@ static void ioapic_write_entry(
spin_unlock_irqrestore(&ioapic_lock, flags);
}
+/* EOI an IO-APIC entry. One of vector or pin may be -1, indicating that
+ * it should be worked out using the other. This function expect that the
+ * ioapic_lock is taken, and interrupts are disabled (or there is a good reason
+ * not to), and that if both pin and vector are passed, that they refer to the
+ * same redirection entry in the IO-APIC. */
+static void __io_apic_eoi(unsigned int apic, unsigned int vector, unsigned int
pin)
+{
+ /* Ensure some useful information is passed in */
+ BUG_ON( (vector == -1 && pin == -1) );
+
+ /* Prefer the use of the EOI register if available */
+ if ( ioapic_has_eoi_reg(apic) )
+ {
+ /* If vector is unknown, read it from the IO-APIC */
+ if ( vector == -1 )
+ vector = __ioapic_read_entry(apic, pin, TRUE).vector;
+
+ *(IO_APIC_BASE(apic)+16) = vector;
+ }
+ else
+ {
+ /* Else fake an EOI by switching to edge triggered mode
+ * and back */
+ struct IO_APIC_route_entry entry;
+ bool_t need_to_unmask = 0;
+
+ /* If pin is unknown, search for it */
+ if ( pin == -1 )
+ {
+ unsigned int p;
+ for ( p = 0; p < nr_ioapic_registers[apic]; ++p )
+ {
+ entry = __ioapic_read_entry(apic, p, TRUE);
+ if ( entry.vector == vector )
+ {
+ pin = p;
+ /* break; */
+
+ /* Here should be a break out of the loop, but at the
+ * Xen code doesn't actually prevent multiple IO-APIC
+ * entries being assigned the same vector, so EOI all
+ * pins which have the correct vector.
+ *
+ * Remove the following code when the above assertion
+ * is fulfilled. */
+
+ if ( ! entry.mask )
+ {
+ /* If entry is not currently masked, mask it and make
+ * a note to unmask it later */
+ entry.mask = 1;
+ __ioapic_write_entry(apic, pin, TRUE, entry);
+ need_to_unmask = 1;
+ }
+
+ /* Flip the trigger mode to edge and back */
+ entry.trigger = 0;
+ __ioapic_write_entry(apic, pin, TRUE, entry);
+ entry.trigger = 1;
+ __ioapic_write_entry(apic, pin, TRUE, entry);
+
+ if ( need_to_unmask )
+ {
+ /* Unmask if neccesary */
+ entry.mask = 0;
+ __ioapic_write_entry(apic, pin, TRUE, entry);
+ }
+
+ }
+ }
+
+ /* If search fails, nothing to do */
+
+ /* if ( pin == -1 ) */
+
+ /* Because the loop wasn't broken out of (see comment above),
+ * all relevant pins have been EOI, so we can always return.
+ *
+ * Re-instate the if statement above when the Xen logic has been
+ * fixed.*/
+
+ return;
+ }
+
+ entry = __ioapic_read_entry(apic, pin, TRUE);
+
+ if ( ! entry.mask )
+ {
+ /* If entry is not currently masked, mask it and make
+ * a note to unmask it later */
+ entry.mask = 1;
+ __ioapic_write_entry(apic, pin, TRUE, entry);
+ need_to_unmask = 1;
+ }
+
+ /* Flip the trigger mode to edge and back */
+ entry.trigger = 0;
+ __ioapic_write_entry(apic, pin, TRUE, entry);
+ entry.trigger = 1;
+ __ioapic_write_entry(apic, pin, TRUE, entry);
+
+ if ( need_to_unmask )
+ {
+ /* Unmask if neccesary */
+ entry.mask = 0;
+ __ioapic_write_entry(apic, pin, TRUE, entry);
+ }
+ }
+}
+
+/* EOI an IO-APIC entry. One of vector or pin may be -1, indicating that
+ * it should be worked out using the other. This function disables interrupts
+ * and takes the ioapic_lock */
+static void io_apic_eoi(unsigned int apic, unsigned int vector, unsigned int
pin)
+{
+ unsigned int flags;
+ spin_lock_irqsave(&ioapic_lock, flags);
+ __io_apic_eoi(apic, vector, pin);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
/*
* Saves all the IO-APIC RTE's
*/
@@ -357,7 +485,7 @@ static void __eoi_IO_APIC_irq(unsigned i
pin = entry->pin;
if (pin == -1)
break;
- io_apic_eoi(entry->apic, vector);
+ __io_apic_eoi(entry->apic, vector, pin);
if (!entry->next)
break;
entry = irq_2_pin + entry->next;
@@ -397,18 +525,7 @@ static void clear_IO_APIC_pin(unsigned i
entry.trigger = 1;
__ioapic_write_entry(apic, pin, TRUE, entry);
}
- if (mp_ioapics[apic].mpc_apicver >= 0x20)
- io_apic_eoi(apic, entry.vector);
- else {
- /*
- * Mechanism by which we clear remoteIRR in this case is by
- * changing the trigger mode to edge and back to level.
- */
- entry.trigger = 0;
- __ioapic_write_entry(apic, pin, TRUE, entry);
- entry.trigger = 1;
- __ioapic_write_entry(apic, pin, TRUE, entry);
- }
+ __io_apic_eoi(apic, entry.vector, pin);
}
/*
@@ -1750,7 +1867,7 @@ static void end_level_ioapic_irq (unsign
{
int ioapic;
for (ioapic = 0; ioapic < nr_ioapics; ioapic++)
- io_apic_eoi(ioapic, i);
+ io_apic_eoi_vector(ioapic, i);
}
v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
@@ -2622,3 +2739,4 @@ void __init init_ioapic_mappings(void)
printk(XENLOG_INFO "IRQ limits: %u GSI, %u MSI/MSI-X\n",
nr_irqs_gsi, nr_irqs - nr_irqs_gsi);
}
+
diff -r 0268e7380953 -r 3c5869cb1744 xen/include/asm-x86/io_apic.h
--- a/xen/include/asm-x86/io_apic.h Mon Sep 05 15:10:28 2011 +0100
+++ b/xen/include/asm-x86/io_apic.h Mon Sep 12 11:32:01 2011 +0100
@@ -157,11 +157,6 @@ static inline void io_apic_write(unsigne
__io_apic_write(apic, reg, value);
}
-static inline void io_apic_eoi(unsigned int apic, unsigned int vector)
-{
- *(IO_APIC_BASE(apic)+16) = vector;
-}
-
/*
* Re-write a value: to be used for read-modify-write
* cycles where the read already set up the index register.
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home