WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

Re: [Xen-devel] xen 4.2 unstable; HVM; 2.6.39.3; HD/Network card error

On Mon, Jul 18, 2011 at 12:47:49PM +0100, Stefano Stabellini wrote:
> On Sun, 17 Jul 2011, Walter Robert Ditzler wrote:
> > hi folks,
> > 
> > after long trying i need some help from the big world :-)
> > 
> > question
> > ********
> > when I boot a guest system, tried debian 6.0.2 amd64 firmware, I get errors
> > like:
> > 
> > 1) after click install on debian 6.0.2 installer
> > [0.642450] vbd vbd-5632: 19 xenbus_dev_probe on device/vbd/5632
> > [0.642911] vbd vbd-5632: failed to write error node for device/vbd/5632 (19
> > xenbus_dev_probe on device/vbd/5632)
> > 
> > 2) network
> > no dhcp server found, ask me to setup ip manually, cause no network card
> > found
> > 
> > 3) disk
> > stops at the disk detection, no appropriate driver found
> > 
> > also no hw stuff found while trying to install windows 7 x64.
> > 
> > I have a 4.0.1 on squeeze running and productive, I am not a newbe, but at
> > the end with my latin.
> > 
> > can anyone help me out here?
> > 
> > below my system info's!
> > attached some more system info like:
> > 
> > /var/log/xen
> > - xl-server02.log
> > - qemu-dm-server02.log
> > - xen-hotplug.log
> > 
> > console
> > - dmesg
> > - lspci
> > - xl dmesg
> > 
> > thanks a lot, walter
> > 
> > 
> > guest config
> > ************
> > 
> > ***
> > name            = 'server02'
> > kernel          = '/usr/lib64/xen/boot/hvmloader'
> > builder         = 'hvm'
> > device_model    = '/usr/lib64/xen/bin/qemu-dm'
> > maxmem          = 1024
> > memory          = 1024
> > vcpus           = 1
> > acpi            = 0
> > #apic            = 1
> > 
> > vif             = ['bridge=eth0']
> > disk            =
> > ['phy:/dev/vgmain/lv_server02,xvda,w','phy:/var/xen/firmware-6.0.2.1-amd64-n
> > etinst.iso,hdc:cdrom,r']
> 
> Considering that this is an hvm guest and that you only have one disk,
> it should be hda rather than xvda.
> Also it is probably not a good idea to disable acpi.
> 
> 
> > boot            = 'cd'
> > usbdevice       = 'tablet'
> > 
> > extra           = 'swiotlb=force iommu=soft'
> 
> this is an hvm guest so extra is not going to do much, you need to pass
> these parameters directly to the guest kernel from grub if you want them.

And not sure if you want to do that. You will enable bounce buffer
for _ANY_ DMA transaction. Get rid of that 'swiotlb=force'. You don't
need iommu=soft either as your are running in HVM mode.


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel