WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

[Xen-devel] Re: [Qemu-devel] [PATCH] xen: fix interrupt routing

To: stefano.stabellini@xxxxxxxxxxxxx
Subject: [Xen-devel] Re: [Qemu-devel] [PATCH] xen: fix interrupt routing
From: Isaku Yamahata <yamahata@xxxxxxxxxxxxx>
Date: Thu, 19 May 2011 11:14:11 +0900
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx, qemu-devel@xxxxxxxxxx, agraf@xxxxxxx
Delivery-date: Wed, 18 May 2011 19:15:34 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <1305741220-4990-1-git-send-email-stefano.stabellini@xxxxxxxxxxxxx>
List-help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id: Xen developer discussion <xen-devel.lists.xensource.com>
List-post: <mailto:xen-devel@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
References: <1305741220-4990-1-git-send-email-stefano.stabellini@xxxxxxxxxxxxx>
Sender: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
User-agent: Mutt/1.5.19 (2009-01-05)
On Wed, May 18, 2011 at 06:53:40PM +0100, stefano.stabellini@xxxxxxxxxxxxx 
wrote:
> From: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
> 
> Match the routing informations built by seabios:
> 
> - remove i440fx_write_config_xen
> we don't need to intercept pci config writes to i440FX;
> 
> - introduce piix3_write_config_xen
> we do need to intercept pci config write to the PCI-ISA bridge to update
> the PCI link routing;

So "i440FX-xen" isn't needed anymore, and something like PIIX3-xen
is necessary instead of overwriting piix3->dev.config_write.

thanks,

> 
> - remove xen_pci_slot_get_pirq
> we are now using the same link routing as seabios and qemu so we don't
> need a diffirent get_pirq function;
> 
> - fix xen_piix3_set_irq
> we always inject one of the 4 pci intx, so we can use
> xc_hvm_set_isa_irq_level to inject the interrupt. Use pci_irqs as
> initialized by seabios to map a pirq into an ISA irq. This has the
> benefit of removing all the calls to xc_hvm_set_pci_intx_level that
> doesn't work correctly anymore because from the same device number and
> intx Xen calculates a different PCI link compared to Qemu and Seabios.
> 
> Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
> ---
>  hw/piix_pci.c |   21 ++++++++++++---------
>  xen-all.c     |   16 ++++++++--------
>  2 files changed, 20 insertions(+), 17 deletions(-)
> 
> diff --git a/hw/piix_pci.c b/hw/piix_pci.c
> index 7f1c4cc..aae6a48 100644
> --- a/hw/piix_pci.c
> +++ b/hw/piix_pci.c
> @@ -78,6 +78,8 @@ struct PCII440FXState {
>  #define I440FX_SMRAM    0x72
>  
>  static void piix3_set_irq(void *opaque, int pirq, int level);
> +static void piix3_write_config_xen(PCIDevice *dev,
> +                               uint32_t address, uint32_t val, int len);
>  
>  /* return the global irq number corresponding to a given device irq
>     pin. We could also use the bus number to have a more precise
> @@ -173,13 +175,6 @@ static void i440fx_write_config(PCIDevice *dev,
>      }
>  }
>  
> -static void i440fx_write_config_xen(PCIDevice *dev,
> -                                    uint32_t address, uint32_t val, int len)
> -{
> -    xen_piix_pci_write_config_client(address, val, len);
> -    i440fx_write_config(dev, address, val, len);
> -}
> -
>  static int i440fx_load_old(QEMUFile* f, void *opaque, int version_id)
>  {
>      PCII440FXState *d = opaque;
> @@ -301,7 +296,8 @@ PCIBus *i440fx_xen_init(PCII440FXState **pi440fx_state, 
> int *piix3_devfn,
>      PCIBus *b;
>  
>      b = i440fx_common_init("i440FX-xen", pi440fx_state, piix3_devfn, pic, 
> ram_size);
> -    pci_bus_irqs(b, xen_piix3_set_irq, xen_pci_slot_get_pirq,
> +    (*pi440fx_state)->piix3->dev.config_write = piix3_write_config_xen;
> +    pci_bus_irqs(b, xen_piix3_set_irq, pci_slot_get_pirq,
>                   (*pi440fx_state)->piix3, PIIX_NUM_PIRQS);
>  
>      return b;
> @@ -365,6 +361,13 @@ static void piix3_write_config(PCIDevice *dev,
>      }
>  }
>  
> +static void piix3_write_config_xen(PCIDevice *dev,
> +                               uint32_t address, uint32_t val, int len)
> +{
> +    xen_piix_pci_write_config_client(address, val, len);
> +    piix3_write_config(dev, address, val, len);
> +}
> +
>  static void piix3_reset(void *opaque)
>  {
>      PIIX3State *d = opaque;
> @@ -471,7 +474,7 @@ static PCIDeviceInfo i440fx_info[] = {
>          .qdev.vmsd    = &vmstate_i440fx,
>          .qdev.no_user = 1,
>          .init         = i440fx_initfn,
> -        .config_write = i440fx_write_config_xen,
> +        .config_write = i440fx_write_config,
>      },{
>          .qdev.name    = "PIIX3",
>          .qdev.desc    = "ISA bridge",
> diff --git a/xen-all.c b/xen-all.c
> index 0eac202..7d7863f 100644
> --- a/xen-all.c
> +++ b/xen-all.c
> @@ -70,17 +70,16 @@ typedef struct XenIOState {
>      Notifier exit;
>  } XenIOState;
>  
> -/* Xen specific function for piix pci */
> +/* pci_irqs as initialized by seabios */
> +uint8_t pci_irqs[4] = {
> +    10, 10, 11, 11
> +};
>  
> -int xen_pci_slot_get_pirq(PCIDevice *pci_dev, int irq_num)
> -{
> -    return irq_num + ((pci_dev->devfn >> 3) << 2);
> -}
> +/* Xen specific function for piix pci */
>  
> -void xen_piix3_set_irq(void *opaque, int irq_num, int level)
> +void xen_piix3_set_irq(void *opaque, int pirq, int level)
>  {
> -    xc_hvm_set_pci_intx_level(xen_xc, xen_domid, 0, 0, irq_num >> 2,
> -                              irq_num & 3, level);
> +    xc_hvm_set_isa_irq_level(xen_xc, xen_domid, pci_irqs[pirq], level);
>  }
>  
>  void xen_piix_pci_write_config_client(uint32_t address, uint32_t val, int 
> len)
> @@ -95,6 +94,7 @@ void xen_piix_pci_write_config_client(uint32_t address, 
> uint32_t val, int len)
>          }
>          v &= 0xf;
>          if (((address + i) >= 0x60) && ((address + i) <= 0x63)) {
> +            pci_irqs[address + i - 0x60] = v;
>              xc_hvm_set_pci_link_route(xen_xc, xen_domid, address + i - 0x60, 
> v);
>          }
>      }
> -- 
> 1.7.2.3
> 
> 

-- 
yamahata

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel