F2 = System Setup Phoenix ROM BIOS PLUS Version 1.10 2.2.9 F10 = System Services Copyright 1985-1988 Phoenix Technologies Ltd. F11 = BIOS Boot Manager Copyright 1990-2010 Dell Inc. F12 = PXE Boot All Rights Reserved Dell System PowerEdge M610 www.dell.com Testing memory. Please wait. iDRAC6 Configuration Utility 1.24 CopyrightG2010uDelloInc.rAllsRightsBReserved:4.80 GT/s, L2/L3 Cache:1 MB/4 MB System running at 2.00 GHz iDRAC6 FirmwareiRevision version:e3.02m(Builde008)800 MHz, Voltage: 1.5V Primary Backplane Firmware Revision 1.07 ------------------------------- BroadcIPv6eSettingsII Ethernet Boot Agent v6.0.11 -------------------------------m Corporation AIPv6iStackreserv:dDisabled PAddresse1Expanda:l::RAIDfControllerMBIOS 1DefaultlGateways:)::undronithethosttadapter. 1-------------------------------OSon Utility IPv4 Settings ------------------------------- IPv4 Stack : Enabled IP Address : 187. 33. 16. 10 Subnet mask : 255.255.255.128 DefaLoadingestage2.... 33. 16. 1 Press for Remote Access Setup within 5 sec...... GRUB Booting 'KERNEL-XEN-38' kernel /xen.gz dom0_mem=2048M loglvl=all guest_loglvl=all sync_console consol e_to_ring com1=115200,8n1 console=com1 lapic=debug apic_verbosity=debug apic=de bug iommu=off [Multiboot-elf, <0x100000:0x178000:0x140000>, shtab=0x3b8078, entry=0x100000 ] module /vmlinuz-2.6.38-rc8+ ro nomodeset root=/dev/VolGroup00/LogVol00 console= hvc0 earlyprintk=xen initcall_debug debug loglevel=10 [Multiboot-module @ 0x3b9000, 0x4039d0 bytes] module /initrd-2.6.38-rc8+.img __ __ _ _ ___ ____ _____ \ \/ /___ _ __ | || | / _ \ |___ \ _ __ ___|___ / _ __ _ __ ___ \ // _ \ '_ \ | || |_| | | | __) |__| '__/ __| |_ \ __| '_ \| '__/ _ \ / \ __/ | | | |__ _| |_| | / __/|__| | | (__ ___) |__| |_) | | | __/ /_/\_\___|_| |_| |_|(_)___(_)_____| |_| \___|____/ | .__/|_| \___| |_| (XEN) Xen version 4.0.2-rc3-pre (root@xxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) Thu Mar 17 12:13:35 BRT 2011 (XEN) Latest ChangeSet: Thu Feb 10 17:26:19 2011 +0000 21452:996f7815b070 (XEN) Console output is synchronous. (XEN) Bootloader: GNU GRUB 0.97 (XEN) Command line: dom0_mem=2048M loglvl=all guest_loglvl=all sync_console console_to_ring com1=115200,8n1 console=com1 lapic=debug apic_verbosity=debug apic=debugf (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 00000000000a0000 (usable) (XEN) 0000000000100000 - 00000000bf369000 (usable) (XEN) 00000000bf369000 - 00000000bf37f000 (reserved) (XEN) 00000000bf37f000 - 00000000bf3be000 (ACPI data) (XEN) 00000000bf30000c0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fe000000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000840000000 (usable) (XEN) ACPI: RSDP 000F1950, 0024 (r2 DELL ) (XEN) ACPI: XSDT 000F1A54, 009C (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: FACP BF3A3F9C, 00F4 (r3 DELL PE_SC3 1 DELL 1) (XEN) ACPI: DSDT BF37F000, 39D9 (r1 DELL PE_SC3 1 INTL 20050624) (XEN) ACPI: FACS BF3A6000, 0040 (XEN) ACPI: APIC BF3A3478, 015E (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: SPCR BF3A35D8, 0050 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: HPET BF3A362C, 0038 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: DMAR BF3A3668, 01B8 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: MCFG BF3A38C4, 003C (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: WD__ BF3A3904, 0134 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: SLIC BF3A3A3C, 0024 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: ERST BF382B5C, 0270 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: HEST BF382DCC, 03A8 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: BERT BF3829DC, 0030 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: EINJ BF382A0C, 0150 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: SRAT BF3A3BC0, 0370 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: TCPA BF3A3F34, 0064 (r2 DELL PE_SC3 1 DELL 1) (XEN) ACPI: SSDT BF3A7000, 1DEC (r1 INTEL PPM RCM 80000001 INTL 20061109) (XEN) System RAM: 32755MB (33541156kB) (XEN) SRAT: PXM 1 -> APIC 16 -> Node 0 (XEN) SRAT: PXM 2 -> APIC 0 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 18 -> Node 0 (XEN) SRAT: PXM 2 -> APIC 2 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 20 -> Node 0 (XEN) SRAT: PXM 2 -> APIC 4 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 22 -> Node 0 (XEN) SRAT: PXM 2 -> APIC 6 -> Node 1 (XEN) SRAT: Node 1 PXM 2 0-c0000000 (XEN) SRAT: Node 1 PXM 2 100000000-440000000 (XEN) SRAT: Node 0 PXM 1 440000000-840000000 (XEN) NUMA: Using 18 for the hash shift. (XEN) Domain heap initialised DMA width 32 bits (XEN) found SMP MP-table at 000fe710 (XEN) DMI 2.6 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x808 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] (XEN) ACPI: wakeup_vec[bf3a600c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) (XEN) Processor #16 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled) (XEN) Processor #0 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) (XEN) Processor #18 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) (XEN) Processor #2 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) (XEN) Processor #20 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled) (XEN) Processor #4 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled) (XEN) Processor #22 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x06] enabled) (XEN) Processor #6 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled) (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled) (XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled) (XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled) (XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled) (XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled) (XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled) (XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled) (XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled) (XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled) (XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled) (XEN) ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32]) (XEN) IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) ACPI: HPET id: 0x8086a301 base: 0xfed00000 (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) Using ACPI (MADT) for SMP configuration information (XEN) mapped APIC to ffff82c3ffffe000 (fee00000) (XEN) mapped IOAPIC to ffff82c3ffffd000 (fec00000) (XEN) mapped IOAPIC to ffff82c3ffffc000 (fec80000) (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 1995.031 MHz processor. (XEN) Initing memory sharing. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) EPT supports 2MB super page. (XEN) HVM: ASIDs enabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging detected. (XEN) Intel machine check reporting enabled (XEN) I/O virtualisation disabled (XEN) Getting VERSION: 60015 (XEN) Getting VERSION: 60015 (XEN) Getting ID: 10000000 (XEN) Getting LVT0: 700 (XEN) Getting LVT1: 400 (XEN) enabled ExtINT on CPU#0 (XEN) masked ExtINT on CPU#1 (XEN) masked ExtINT on CPU#2 (XEN) masked ExtINT on CPU#3 (XEN) masked ExtINT on CPU#4 (XEN) masked ExtINT on CPU#5 (XEN) masked ExtINT on CPU#6 (XEN) masked ExtINT on CPU#7 (XEN) Total of 8 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) init IO_APIC IRQs (XEN) IO-APIC (apicid-pin) 0-0, 0-16, 0-17, 0-18, 0-19, 0-20, 0-21, 0-22, 0-23, 1-0, 1-1, 1-2, 1-3, 1-4, 1-5, 1-6, 1-7, 1-8, 1-9, 1-10, 1-11, 1-12, 1-13, 1-14, 1-15,. (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) number of MP IRQ sources: 15. (XEN) number of IO-APIC #0 registers: 24. (XEN) number of IO-APIC #1 registers: 24. (XEN) testing the IO APIC....................... (XEN) IO APIC #0...... (XEN) .... register #00: 00000000 (XEN) ....... : physical APIC id: 00 (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00170020 (XEN) ....... : max redirection entries: 0017 (XEN) ....... : PRQ implemented: 0 (XEN) ....... : IO APIC version: 0020 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 000 00 1 0 0 0 0 0 0 00 (XEN) 01 001 01 0 0 0 0 0 1 1 28 (XEN) 02 001 01 0 0 0 0 0 1 1 F0 (XEN) 03 001 01 0 0 0 0 0 1 1 30 (XEN) 04 001 01 0 0 0 0 0 1 1 F1 (XEN) 05 001 01 0 0 0 0 0 1 1 38 (XEN) 06 001 01 0 0 0 0 0 1 1 40 (XEN) 07 001 01 0 0 0 0 0 1 1 48 (XEN) 08 001 01 0 0 0 0 0 1 1 50 (XEN) 09 001 01 1 1 0 0 0 1 1 58 (XEN) 0a 001 01 0 0 0 0 0 1 1 60 (XEN) 0b 001 01 0 0 0 0 0 1 1 68 (XEN) 0c 001 01 0 0 0 0 0 1 1 70 (XEN) 0d 001 01 0 0 0 0 0 1 1 78 (XEN) 0e 001 01 0 0 0 0 0 1 1 88 (XEN) 0f 001 01 0 0 0 0 0 1 1 90 (XEN) 10 000 00 1 0 0 0 0 0 0 00 (XEN) 11 000 00 1 0 0 0 0 0 0 00 (XEN) 12 000 00 1 0 0 0 0 0 0 00 (XEN) 13 000 00 1 0 0 0 0 0 0 00 (XEN) 14 000 00 1 0 0 0 0 0 0 00 (XEN) 15 000 00 1 0 0 0 0 0 0 00 (XEN) 16 000 00 1 0 0 0 0 0 0 00 (XEN) 17 000 00 1 0 0 0 0 0 0 00 (XEN) IO APIC #1...... (XEN) .... register #00: 00000000 (XEN) ....... : physical APIC id: 00 (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00170020 (XEN) ....... : max redirection entries: 0017 (XEN) ....... : PRQ implemented: 0 (XEN) ....... : IO APIC version: 0020 (XEN) .... register #02: 00000000 (XEN) ....... : arbitration: 00 (XEN) .... register #03: 00000001 (XEN) ....... : Boot DT : 1 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 000 00 1 0 0 0 0 0 0 00 (XEN) 01 000 00 1 0 0 0 0 0 0 00 (XEN) 02 000 00 1 0 0 0 0 0 0 00 (XEN) 03 000 00 1 0 0 0 0 0 0 00 (XEN) 04 000 00 1 0 0 0 0 0 0 00 (XEN) 05 000 00 1 0 0 0 0 0 0 00 (XEN) 06 000 00 1 0 0 0 0 0 0 00 (XEN) 07 000 00 1 0 0 0 0 0 0 00 (XEN) 08 000 00 1 0 0 0 0 0 0 00 (XEN) 09 000 00 1 0 0 0 0 0 0 00 (XEN) 0a 000 00 1 0 0 0 0 0 0 00 (XEN) 0b 000 00 1 0 0 0 0 0 0 00 (XEN) 0c 000 00 1 0 0 0 0 0 0 00 (XEN) 0d 000 00 1 0 0 0 0 0 0 00 (XEN) 0e 000 00 1 0 0 0 0 0 0 00 (XEN) 0f 000 00 1 0 0 0 0 0 0 00 (XEN) 10 000 00 1 0 0 0 0 0 0 00 (XEN) 11 000 00 1 0 0 0 0 0 0 00 (XEN) 12 000 00 1 0 0 0 0 0 0 00 (XEN) 13 000 00 1 0 0 0 0 0 0 00 (XEN) 14 000 00 1 0 0 0 0 0 0 00 (XEN) 15 000 00 1 0 0 0 0 0 0 00 (XEN) 16 000 00 1 0 0 0 0 0 0 00 (XEN) 17 000 00 1 0 0 0 0 0 0 00 (XEN) Using vector-based indexing (XEN) IRQ to pin mappings: (XEN) IRQ240 -> 0:2 (XEN) IRQ40 -> 0:1 (XEN) IRQ48 -> 0:3 (XEN) IRQ241 -> 0:4 (XEN) IRQ56 -> 0:5 (XEN) IRQ64 -> 0:6 (XEN) IRQ72 -> 0:7 (XEN) IRQ80 -> 0:8 (XEN) IRQ88 -> 0:9 (XEN) IRQ96 -> 0:10 (XEN) IRQ104 -> 0:11 (XEN) IRQ112 -> 0:12 (XEN) IRQ120 -> 0:13 (XEN) IRQ136 -> 0:14 (XEN) IRQ144 -> 0:15 (XEN) .................................... done. (XEN) Using local APIC timer interrupts. (XEN) calibrating APIC timer ... (XEN) ..... CPU clock speed is 1995.0245 MHz. (XEN) ..... host bus clock speed is 133.0016 MHz. (XEN) ..... bus_scale = 0x00008834 (XEN) TSC is reliable, synchronization unnecessary (XEN) Platform timer is 14.318MHz HPET �(XEN) Allocated console ring of 64 KiB. (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) microcode.c:73:d32767 microcode: CPU6 resumed (XEN) microcode.c:73:d32767 microcode: CPU7 resumed (XEN) microcode.c:73:d32767 microcode: CPU5 resumed (XEN) microcode.c:73:d32767 microcode: CPU3 resumed (XEN) Brought up 8 CPUs (XEN) microcode.c:73:d32767 microcode: CPU2 resumed (XEN) microcode.c:73:d32767 microcode: CPU4 resumed (XEN) HPET: 4 timers in total, 0 timers will be used for broadcast (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x880000 (XEN) elf_parse_binary: phdr: paddr=0x1a00000 memsz=0x83500 (XEN) elf_parse_binary: phdr: paddr=0x1a84000 memsz=0x888 (XEN) elf_parse_binary: phdr: paddr=0x1a85000 memsz=0x13f00 (XEN) elf_parse_binary: phdr: paddr=0x1a99000 memsz=0x296000 (XEN) elf_parse_binary: memory: 0x1000000 -> 0x1d2f000 (XEN) elf_xen_parse_note: GUEST_OS = "linux" (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 (XEN) elf_xen_parse_note: ENTRY = 0xffffffff81a99200 (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000 (XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" (XEN) elf_xen_parse_note: PAE_MODE = "yes" (XEN) elf_xen_parse_note: LOADER = "generic" (XEN) elf_xen_parse_note: unknown xen elf note (0xd) (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xffffffff80000000 (XEN) elf_paddr_offset = 0x0 (XEN) virt_offset = 0xffffffff80000000 (XEN) virt_kstart = 0xffffffff81000000 (XEN) virt_kend = 0xffffffff81d2f000 (XEN) virt_entry = 0xffffffff81a99200 (XEN) p2m_base = 0xffffffffffffffff (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1d2f000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000828000000->000000082c000000 (507904 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81d2f000 (XEN) Init. ramdisk: ffffffff81d2f000->ffffffff82395e00 (XEN) Phys-Mach map: ffffffff82396000->ffffffff82796000 (XEN) Start info: ffffffff82796000->ffffffff827964b4 (XEN) Page tables: ffffffff82797000->ffffffff827b0000 (XEN) Boot stack: ffffffff827b0000->ffffffff827b1000 (XEN) TOTAL: ffffffff80000000->ffffffff82c00000 (XEN) ENTRY ADDRESS: ffffffff81a99200 (XEN) Dom0 has maximum 8 VCPUs (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81880000 (XEN) elf_load_binary: phdr 1 at 0xffffffff81a00000 -> 0xffffffff81a83500 (XEN) elf_load_binary: phdr 2 at 0xffffffff81a84000 -> 0xffffffff81a84888 (XEN) elf_load_binary: phdr 3 at 0xffffffff81a85000 -> 0xffffffff81a98f00 (XEN) elf_load_binary: phdr 4 at 0xffffffff81a99000 -> 0xffffffff81b0f000 (XEN) Scrubbing Free RAM: ............................................................................................................................................. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) ********************************************** (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS (XEN) ******* This option is intended to aid debugging of Xen by ensuring (XEN) ******* that all output is synchronously delivered on the serial line. (XEN) ******* However it can introduce SIGNIFICANT latencies and affect (XEN) ******* timekeeping. It is NOT recommended for production use! (XEN) ********************************************** (XEN) 3... 2... 1... (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 180kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-rc8+ (root@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #2 SMP Thu Mar 17 18:32:21 BRT 2011 [ 0.000000] Command line: ro nomodeset root=/dev/VolGroup00/LogVol00 console=hvc0 earlyprintk=xen initcall_debug debug loglevel=10 [ 0.000000] released 0 pages of unused memory [ 0.000000] Set 265463 page(s) to 1-1 mapping. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000080000000 (usable) [ 0.000000] Xen: 0000000080000000 - 00000000bf369000 (unusable) [ 0.000000] Xen: 00000000bf369000 - 00000000bf37f000 (reserved) [ 0.000000] Xen: 00000000bf37f000 - 00000000bf3be000 (ACPI data) [ 0.000000] Xen: 00000000bf3be000 - 00000000c0000000 (reserved) [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] Xen: 00000000fe000000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 0000000580000000 (usable) [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge M610/0N582M, BIOS 2.2.9 10/25/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x580000 max_arch_pfn = 0x400000000 [ 0.000000] last_pfn = 0x80000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] initial memory mapped : 0 - 033ff000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000080000000 [ 0.000000] 0000000000 - 0080000000 page 4k [ 0.000000] kernel direct mapping tables up to 80000000 @ 2ffc000-33ff000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000580000000 [ 0.000000] 0100000000 - 0580000000 page 4k [ 0.000000] kernel direct mapping tables up to 580000000 @ 7d3e9000-80000000 [ 0.000000] RAMDISK: 01d2f000 - 02396000 [ 0.000000] ACPI: RSDP 00000000000f1950 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000000f1a54 0009C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: FACP 00000000bf3a3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: DSDT 00000000bf37f000 039D9 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.000000] ACPI: FACS 00000000bf3a6000 00040 [ 0.000000] ACPI: APIC 00000000bf3a3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SPCR 00000000bf3a35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: HPET 00000000bf3a362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: XMAR 00000000bf3a3668 001B8 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: MCFG 00000000bf3a38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: WD__ 00000000bf3a3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SLIC 00000000bf3a3a3c 00024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: ERST 00000000bf382b5c 00270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: HEST 00000000bf382dcc 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: BERT 00000000bf3829dc 00030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: EINJ 00000000bf382a0c 00150 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SRAT 00000000bf3a3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: TCPA 00000000bf3a3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SSDT 00000000bf3a7000 01DEC (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00580000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x00080000 [ 0.000000] 0: 0x00100000 -> 0x00580000 [ 0.000000] On node 0 totalpages: 5242768 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 505912 pages, LIFO batch:31 [ 0.000000] Normal zone: 64512 pages used for memmap [ 0.000000] Normal zone: 4654080 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) [ 0.000000] BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor) [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/kernel/apic/apic.c:1962 generic_processor_info+0xc3/0x169() [ 0.000000] Hardware name: PowerEdge M610 [ 0.000000] ACPI: apic version mismatch, bootcpu: 0 cpu 1: 10 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.38-rc8+ #2 [ 0.000000] Call Trace: [ 0.000000] [] ? generic_processor_info+0xc3/0x169 [ 0.000000] [] ? warn_slowpath_common+0x80/0x99 [ 0.000000] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 0.000000] [] ? __early_set_fixmap+0xbd/0xc6 [ 0.000000] [] ? early_ioremap+0x13/0x15 [ 0.000000] [] ? __acpi_map_table+0x17/0x19 [ 0.000000] [] ? acpi_os_map_memory+0x25/0x140 [ 0.000000] [] ? __early_set_fixmap+0xbd/0xc6 [ 0.000000] [] ? acpi_tb_verify_checksum+0x11/0x49 [ 0.000000] [] ? generic_processor_info+0xc3/0x169 [ 0.000000] [] ? acpi_register_lapic+0x44/0x46 [ 0.000000] [] ? acpi_parse_lapic+0x35/0x43 [ 0.000000] [] ? acpi_table_parse_entries+0xcb/0x13c [ 0.000000] [] ? acpi_parse_lapic+0x0/0x43 [ 0.000000] [] ? acpi_table_parse_madt+0x1d/0x1f [ 0.000000] [] ? acpi_boot_init+0xf1/0x32d [ 0.000000] [] ? setup_arch+0x9c2/0xa6d [ 0.000000] [] ? xen_spin_lock_flags+0x17/0x19 [ 0.000000] [] ? arch_local_irq_restore+0x19/0x1b [ 0.000000] [] ? start_kernel+0x8d/0x3f1 [ 0.000000] [] ? x86_64_start_reservations+0xba/0xbe [ 0.000000] [] ? xen_start_kernel+0x419/0x420 [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled) [ 0.000000] BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 255, address 0xfec00000, GSI 0-255 [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32]) [ 0.000000] IOAPIC[1]: apic_id 1, version 255, address 0xfec80000, GSI 32-287 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] 32 Processors exceeds NR_CPUS limit of 8 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 304 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000bf369000 [ 0.000000] PM: Registered nosave memory: 00000000bf369000 - 00000000bf37f000 [ 0.000000] PM: Registered nosave memory: 00000000bf37f000 - 00000000bf3be000 [ 0.000000] PM: Registered nosave memory: 00000000bf3be000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000 [ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.0.2-rc3-pre (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fed9000 s81664 r8192 d20736 u110592 [ 0.000000] pcpu-alloc: s81664 r8192 d20736 u110592 alloc=27*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 14.297258] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 5163914 [ 14.305277] Kernel command line: ro nomodeset root=/dev/VolGroup00/LogVol00 console=hvc0 earlyprintk=xen initcall_debug debug loglevel=10 [ 14.317645] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 14.329105] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 14.352470] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 14.407311] Placing 64MB software IO TLB between ffff8800783e9000 - ffff88007c3e9000 [ 14.414965] software IO TLB at phys 0x783e9000 - 0x7c3e9000 [ 14.431518] Memory: 1629604k/23068672k available (5356k kernel code, 2097600k absent, 19341468k reserved, 5409k data, 532k init) [ 14.443143] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 14.450757] Hierarchical RCU implementation. [ 14.454943] CONFIG_RCU_FANOUT set to non-default value of 32 [ 14.460665] RCU-based detection of stalled CPUs is disabled. [ 14.466401] NR_IRQS:4352 nr_irqs:2048 16 [ 14.470386] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 14.476288] xen: registering gsi 9 triggering 0 polarity 0 [ 14.481760] xen: --> pirq=9 -> irq=9 (XEN) IOAPIC[0]: Set PCI routing entry (0-9 -> 0x58 -> IRQ 9 Mode:1 Active:0) [ 14.492152] xen: acpi sci 9 [ 14.494927] xen: --> pirq=1 -> irq=1 [ 14.498480] xen: --> pirq=2 -> irq=2 [ 14.502032] xen: --> pirq=3 -> irq=3 [ 14.505588] xen: --> pirq=4 -> irq=4 [ 14.509138] xen: --> pirq=5 -> irq=5 [ 14.512694] xen: --> pirq=6 -> irq=6 [ 14.516248] xen: --> pirq=7 -> irq=7 [ 14.519799] xen: --> pirq=8 -> irq=8 [ 14.523352] xen_map_pirq_gsi: returning irq 9 for gsi 9 [ 14.528704] xen: --> pirq=9 -> irq=9 [ 14.532255] xen: --> pirq=10 -> irq=10 [ 14.535980] xen: --> pirq=11 -> irq=11 [ 14.539709] xen: --> pirq=12 -> irq=12 [ 14.543435] xen: --> pirq=13 -> irq=13 [ 14.547162] xen: --> pirq=14 -> irq=14 [ 14.550890] xen: --> pirq=15 -> irq=15 [ 14.554654] Console: colour dummy device 80x25 [ 14.559036] console [hvc0] enabled, bootconsole disabled [ 14.559036] console [hvc0] enabled, bootconsole disabled [ 14.569717] Xen: using vcpuop timer interface [ 14.574118] installing Xen timer for CPU 0 [ 14.578305] Detected 1995.031 MHz processor. [ 14.582614] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.06 BogoMIPS (lpj=1995031) [ 14.593270] pid_max: default: 32768 minimum: 301 [ 14.598014] Security Framework initialized [ 14.602111] SELinux: Initializing. [ 14.605671] SELinux: Starting in permissive mode [ 14.610439] Mount-cache hash table entries: 256 [ 14.615312] Initializing cgroup subsys ns [ 14.619313] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 14.628239] Initializing cgroup subsys cpuacct [ 14.632751] Initializing cgroup subsys freezer [ 14.637335] CPU: Unsupported number of siblings 16 [ 14.642592] ACPI: Core revision 20110112 [ 14.656111] cpu 0 spinlock event irq 305 [ 14.660154] calling trace_init_flags_sys_exit+0x0/0x12 @ 1 [ 14.665720] initcall trace_init_flags_sys_exit+0x0/0x12 returned 0 after 0 usecs [ 14.673171] calling trace_init_flags_sys_enter+0x0/0x12 @ 1 [ 14.678891] initcall trace_init_flags_sys_enter+0x0/0x12 returned 0 after 0 usecs [ 14.686431] calling init_hw_perf_events+0x0/0x88e @ 1 [ 14.691630] Performance Events: unsupported p6 CPU model 26 no PMU driver, software events only. [ 14.700472] initcall init_hw_perf_events+0x0/0x88e returned 0 after 0 usecs [ 14.707494] calling migration_init+0x0/0x71 @ 1 [ 14.712173] initcall migration_init+0x0/0x71 returned 0 after 0 usecs [ 14.718673] calling spawn_ksoftirqd+0x0/0x57 @ 1 [ 14.723489] initcall spawn_ksoftirqd+0x0/0x57 returned 0 after 976 usecs [ 14.730199] calling init_workqueues+0x0/0x234 @ 1 [ 14.735196] initcall init_workqueues+0x0/0x234 returned 0 after 976 usecs [ 14.741971] calling init_call_single_data+0x0/0x82 @ 1 [ 14.747255] initcall init_call_single_data+0x0/0x82 returned 0 after 0 usecs [ 14.754361] calling cpu_stop_init+0x0/0x96 @ 1 [ 14.759008] initcall cpu_stop_init+0x0/0x96 returned 0 after 976 usecs [ 14.765543] calling relay_init+0x0/0x14 @ 1 [ 14.769876] initcall relay_init+0x0/0x14 returned 0 after 0 usecs [ 14.776030] calling tracer_alloc_buffers+0x0/0x15c @ 1 [ 14.781367] initcall tracer_alloc_buffers+0x0/0x15c returned 0 after 0 usecs [ 14.788423] calling init_trace_printk+0x0/0x12 @ 1 [ 14.793364] initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs [ 14.800126] calling mce_amd_init+0x0/0x172 @ 1 [ 14.804718] initcall mce_amd_init+0x0/0x172 returned 0 after 0 usecs [ 14.811283] installing Xen timer for CPU 1 [ 14.815397] cpu 1 spinlock event irq 311 [ 14.819541] CPU: Unsupported number of siblings 16 [ 14.819740] installing Xen timer for CPU 2 [ 14.828713] cpu 2 spinlock event irq 317 [ 14.832808] CPU: Unsupported number of siblings 16 [ 14.832969] installing Xen timer for CPU 3 [ 14.841935] cpu 3 spinlock event irq 323 [ 14.846043] CPU: Unsupported number of siblings 16 [ 14.846234] installing Xen timer for CPU 4 [ 14.855198] cpu 4 spinlock event irq 329 [ 14.859288] CPU: Unsupported number of siblings 16 [ 14.859453] installing Xen timer for CPU 5 [ 14.868421] cpu 5 spinlock event irq 335 [ 14.872530] CPU: Unsupported number of siblings 16 [ 14.872720] installing Xen timer for CPU 6 [ 14.881683] cpu 6 spinlock event irq 341 [ 14.885775] CPU: Unsupported number of siblings 16 [ 14.885947] installing Xen timer for CPU 7 [ 14.894919] cpu 7 spinlock event irq 347 [ 14.899026] CPU: Unsupported number of siblings 16 [ 14.899069] Brought up 8 CPUs [ 14.934861] calling init_mmap_min_addr+0x0/0x26 @ 1 [ 14.939811] initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs [ 14.946677] calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1 [ 14.953353] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs [ 14.961843] calling net_ns_init+0x0/0xc8 @ 1 [ 14.966382] initcall net_ns_init+0x0/0xc8 returned 0 after 976 usecs [ 14.972720] calling e820_mark_nvs_memory+0x0/0x41 @ 1 [ 14.977920] initcall e820_mark_nvs_memory+0x0/0x41 returned 0 after 0 usecs [ 14.984940] calling cpufreq_tsc+0x0/0x37 @ 1 [ 14.989361] initcall cpufreq_tsc+0x0/0x37 returned 0 after 0 usecs [ 14.995601] calling pci_reboot_init+0x0/0x14 @ 1 [ 15.000368] initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs [ 15.006954] calling init_lapic_sysfs+0x0/0x36 @ 1 [ 15.012046] initcall init_lapic_sysfs+0x0/0x36 returned 0 after 976 usecs [ 15.018821] calling init_smp_flush+0x0/0x31 @ 1 [ 15.023501] initcall init_smp_flush+0x0/0x31 returned 0 after 0 usecs [ 15.030000] calling alloc_frozen_cpus+0x0/0x8 @ 1 [ 15.034853] initcall alloc_frozen_cpus+0x0/0x8 returned 0 after 0 usecs [ 15.041527] calling sysctl_init+0x0/0x32 @ 1 [ 15.046080] initcall sysctl_init+0x0/0x32 returned 0 after 976 usecs [ 15.052422] calling ksysfs_init+0x0/0x94 @ 1 [ 15.056851] initcall ksysfs_init+0x0/0x94 returned 0 after 0 usecs [ 15.063082] calling init_jiffies_clocksource+0x0/0x12 @ 1 [ 15.068630] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs [ 15.075996] calling pm_init+0x0/0x39 @ 1 [ 15.080075] initcall pm_init+0x0/0x39 returned 0 after 0 usecs [ 15.085963] calling pm_disk_init+0x0/0x19 @ 1 [ 15.090472] initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs [ 15.096798] calling swsusp_header_init+0x0/0x2c @ 1 [ 15.101826] initcall swsusp_header_init+0x0/0x2c returned 0 after 0 usecs [ 15.108672] calling init_zero_pfn+0x0/0x66 @ 1 [ 15.113265] initcall init_zero_pfn+0x0/0x66 returned 0 after 0 usecs [ 15.119678] calling fsnotify_init+0x0/0x26 @ 1 [ 15.124274] initcall fsnotify_init+0x0/0x26 returned 0 after 0 usecs [ 15.130684] calling filelock_init+0x0/0x2e @ 1 [ 15.135282] initcall filelock_init+0x0/0x2e returned 0 after 0 usecs [ 15.141692] calling init_misc_binfmt+0x0/0x45 @ 1 [ 15.146548] initcall init_misc_binfmt+0x0/0x45 returned 0 after 0 usecs [ 15.153218] calling init_script_binfmt+0x0/0x14 @ 1 [ 15.158247] initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs [ 15.165093] calling init_elf_binfmt+0x0/0x14 @ 1 [ 15.169861] initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs [ 15.176447] calling init_compat_elf_binfmt+0x0/0x14 @ 1 [ 15.181820] initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs [ 15.189013] calling debugfs_init+0x0/0x5a @ 1 [ 15.193525] initcall debugfs_init+0x0/0x5a returned 0 after 0 usecs [ 15.199850] calling random32_init+0x0/0xd1 @ 1 [ 15.204442] initcall random32_init+0x0/0xd1 returned 0 after 0 usecs [ 15.210855] calling __gnttab_init+0x0/0x21 @ 1 [ 15.215475] Grant table initialized [ 15.219000] initcall __gnttab_init+0x0/0x21 returned 0 after 976 usecs [ 15.225593] calling early_resume_init+0x0/0x19b @ 1 [ 15.230648] Time: 12:55:27 Date: 03/18/11 [ 15.234777] initcall early_resume_init+0x0/0x19b returned 0 after 0 usecs [ 15.241622] calling cpufreq_core_init+0x0/0x8c @ 1 [ 15.246569] initcall cpufreq_core_init+0x0/0x8c returned 0 after 0 usecs [ 15.253323] calling cpuidle_init+0x0/0x40 @ 1 [ 15.257849] initcall cpuidle_init+0x0/0x40 returned 0 after 976 usecs [ 15.264328] calling sock_init+0x0/0x83 @ 1 [ 15.268643] initcall sock_init+0x0/0x83 returned 0 after 976 usecs [ 15.274817] calling net_inuse_init+0x0/0x26 @ 1 [ 15.279501] initcall net_inuse_init+0x0/0x26 returned 0 after 0 usecs [ 15.285998] calling netpoll_init+0x0/0x31 @ 1 [ 15.290505] initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs [ 15.296832] calling netlink_proto_init+0x0/0x1a8 @ 1 [ 15.301963] NET: Registered protocol family 16 [ 15.306472] initcall netlink_proto_init+0x0/0x1a8 returned 0 after 1952 usecs [ 15.313647] calling bdi_class_init+0x0/0x4d @ 1 [ 15.318486] initcall bdi_class_init+0x0/0x4d returned 0 after 976 usecs [ 15.325087] calling kobject_uevent_init+0x0/0x21 @ 1 [ 15.330217] initcall kobject_uevent_init+0x0/0x21 returned 0 after 976 usecs [ 15.337307] calling pcibus_class_init+0x0/0x19 @ 1 [ 15.342375] initcall pcibus_class_init+0x0/0x19 returned 0 after 976 usecs [ 15.349233] calling pci_driver_init+0x0/0x12 @ 1 [ 15.354137] initcall pci_driver_init+0x0/0x12 returned 0 after 976 usecs [ 15.360821] calling backlight_class_init+0x0/0x5d @ 1 [ 15.366146] initcall backlight_class_init+0x0/0x5d returned 0 after 976 usecs [ 15.373266] calling video_output_class_init+0x0/0x19 @ 1 [ 15.378854] initcall video_output_class_init+0x0/0x19 returned 0 after 976 usecs [ 15.386234] calling xenbus_init+0x0/0x22e @ 1 [ 15.390955] initcall xenbus_init+0x0/0x22e returned 0 after 976 usecs [ 15.397386] calling tty_class_init+0x0/0x38 @ 1 [ 15.402193] initcall tty_class_init+0x0/0x38 returned 0 after 976 usecs [ 15.408791] calling vtconsole_class_init+0x0/0xc3 @ 1 [ 15.414254] initcall vtconsole_class_init+0x0/0xc3 returned 0 after 976 usecs [ 15.421376] calling wakeup_sources_debugfs_init+0x0/0x2b @ 1 [ 15.427189] initcall wakeup_sources_debugfs_init+0x0/0x2b returned 0 after 0 usecs [ 15.434809] calling i2c_init+0x0/0x6a @ 1 [ 15.439231] initcall i2c_init+0x0/0x6a returned 0 after 976 usecs [ 15.445315] calling amd_postcore_init+0x0/0x956 @ 1 [ 15.450340] initcall amd_postcore_init+0x0/0x956 returned 0 after 0 usecs [ 15.457189] calling arch_kdebugfs_init+0x0/0x20b @ 1 [ 15.462329] initcall arch_kdebugfs_init+0x0/0x20b returned 0 after 0 usecs [ 15.469236] calling mtrr_if_init+0x0/0x7a @ 1 [ 15.473743] initcall mtrr_if_init+0x0/0x7a returned -19 after 0 usecs [ 15.480242] calling acpi_configure_wakeup_memory+0x0/0x1e @ 1 [ 15.486141] initcall acpi_configure_wakeup_memory+0x0/0x1e returned 0 after 0 usecs [ 15.493849] calling ffh_cstate_init+0x0/0x2a @ 1 [ 15.498619] initcall ffh_cstate_init+0x0/0x2a returned 0 after 0 usecs [ 15.505204] calling acpi_pci_init+0x0/0x61 @ 1 [ 15.509796] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 15.517423] ACPI: bus type pci registered [ 15.521498] initcall acpi_pci_init+0x0/0x61 returned 0 after 0 usecs [ 15.527910] calling setup_vcpu_hotplug_event+0x0/0x22 @ 1 [ 15.533457] initcall setup_vcpu_hotplug_event+0x0/0x22 returned 0 after 0 usecs [ 15.540823] calling register_xen_pci_notifier+0x0/0x33 @ 1 [ 15.546458] initcall register_xen_pci_notifier+0x0/0x33 returned 0 after 0 usecs [ 15.554000] calling dmi_id_init+0x0/0x31c @ 1 [ 15.558810] initcall dmi_id_init+0x0/0x31c returned 0 after 976 usecs [ 15.565232] calling pci_arch_init+0x0/0x69 @ 1 [ 15.569869] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 15.579184] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 15.688935] PCI: Using configuration type 1 for base access [ 15.695032] initcall pci_arch_init+0x0/0x69 returned 0 after 88857 usecs [ 15.701719] calling topology_init+0x0/0x3e @ 1 [ 15.707282] initcall topology_init+0x0/0x3e returned 0 after 976 usecs [ 15.713793] calling mtrr_init_finialize+0x0/0x3d @ 1 [ 15.718908] initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs [ 15.725839] calling init_vdso_vars+0x0/0x1df @ 1 [ 15.730633] initcall init_vdso_vars+0x0/0x1df returned 0 after 976 usecs [ 15.737368] calling sysenter_setup+0x0/0x2ed @ 1 [ 15.742139] initcall sysenter_setup+0x0/0x2ed returned 0 after 0 usecs [ 15.748721] calling param_sysfs_init+0x0/0x17c @ 1 [ 15.778864] initcall param_sysfs_init+0x0/0x17c returned 0 after 23434 usecs [ 15.785903] calling pm_sysrq_init+0x0/0x19 @ 1 [ 15.790497] initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs [ 15.796910] calling default_bdi_init+0x0/0xa0 @ 1 [ 15.802109] initcall default_bdi_init+0x0/0xa0 returned 0 after 976 usecs [ 15.808879] calling init_bio+0x0/0xe2 @ 1 [ 15.813047] bio: create slab at 0 [ 15.817115] initcall init_bio+0x0/0xe2 returned 0 after 0 usecs [ 15.823094] calling fsnotify_notification_init+0x0/0x8b @ 1 [ 15.828818] initcall fsnotify_notification_init+0x0/0x8b returned 0 after 0 usecs [ 15.836353] calling cryptomgr_init+0x0/0x12 @ 1 [ 15.841033] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs [ 15.847533] calling blk_settings_init+0x0/0x2a @ 1 [ 15.852474] initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs [ 15.859233] calling blk_ioc_init+0x0/0x2a @ 1 [ 15.863741] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs [ 15.870068] calling blk_softirq_init+0x0/0x6e @ 1 [ 15.874922] initcall blk_softirq_init+0x0/0x6e returned 0 after 0 usecs [ 15.881595] calling blk_iopoll_setup+0x0/0x6e @ 1 [ 15.886450] initcall blk_iopoll_setup+0x0/0x6e returned 0 after 0 usecs [ 15.893122] calling genhd_device_init+0x0/0x86 @ 1 [ 15.898182] initcall genhd_device_init+0x0/0x86 returned 0 after 976 usecs [ 15.905041] calling pci_slot_init+0x0/0x45 @ 1 [ 15.909653] initcall pci_slot_init+0x0/0x45 returned 0 after 976 usecs [ 15.916219] calling fbmem_init+0x0/0x98 @ 1 [ 15.920694] initcall fbmem_init+0x0/0x98 returned 0 after 976 usecs [ 15.926950] calling acpi_init+0x0/0x2be @ 1 [ 15.934461] ACPI: EC: Look up EC in DSDT [ 15.942825] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 15.954506] ACPI: Interpreter enabled [ 15.958159] ACPI: (supports S0 S4 S5) [ 15.961889] ACPI: Using IOAPIC for interrupt routing [ 15.984470] initcall acpi_init+0x0/0x2be returned 0 after 27339 usecs [ 15.990894] calling dock_init+0x0/0xa5 @ 1 [ 15.995438] ACPI: No dock devices found. [ 15.999355] initcall dock_init+0x0/0xa5 returned 0 after 976 usecs [ 16.005595] calling acpi_pci_root_init+0x0/0x2d @ 1 [ 16.010621] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 16.020576] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 16.027452] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 16.034047] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 16.040722] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 16.048088] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfdffffff] [ 16.055455] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] [ 16.062855] pci 0000:00:00.0: [8086:3403] type 0 class 0x000600 [ 16.068951] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 16.075031] pci 0000:00:00.0: PME# disabled [ 16.079332] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 [ 16.085404] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 16.091489] pci 0000:00:01.0: PME# disabled [ 16.095804] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 [ 16.101867] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 16.107947] pci 0000:00:07.0: PME# disabled [ 16.112249] pci 0000:00:08.0: [8086:340f] type 1 class 0x000604 [ 16.118327] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold [ 16.124405] pci 0000:00:08.0: PME# disabled [ 16.128708] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604 [ 16.134782] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 16.140864] pci 0000:00:09.0: PME# disabled [ 16.145182] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 [ 16.151290] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 [ 16.157398] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 [ 16.163529] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 [ 16.169556] pci 0000:00:1a.0: reg 20: [io 0xec00-0xec1f] [ 16.175059] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 [ 16.181084] pci 0000:00:1a.1: reg 20: [io 0xec20-0xec3f] [ 16.186612] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 [ 16.192565] pci 0000:00:1a.7: reg 10: [mem 0xdf1ff800-0xdf1ffbff] [ 16.198863] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 16.204949] pci 0000:00:1a.7: PME# disabled [ 16.209258] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 [ 16.215331] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 16.221417] pci 0000:00:1c.0: PME# disabled [ 16.225731] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 [ 16.231760] pci 0000:00:1d.0: reg 20: [io 0xec40-0xec5f] [ 16.237264] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 [ 16.243286] pci 0000:00:1d.1: reg 20: [io 0xec60-0xec7f] [ 16.248788] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 [ 16.254814] pci 0000:00:1d.2: reg 20: [io 0xec80-0xec9f] [ 16.260341] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 [ 16.266297] pci 0000:00:1d.7: reg 10: [mem 0xdf1ffc00-0xdf1fffff] [ 16.272593] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 16.278680] pci 0000:00:1d.7: PME# disabled [ 16.282967] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 16.289062] pci 0000:00:1f.0: [8086:2918] type 0 class 0x000601 [ 16.295153] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [ 16.303058] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO [ 16.310251] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f) [ 16.317878] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f) [ 16.325505] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f) [ 16.333363] pci 0000:01:00.0: [14e4:163a] type 0 class 0x000200 [ 16.339303] pci 0000:01:00.0: reg 10: [mem 0xd6000000-0xd7ffffff 64bit] [ 16.346126] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 16.352210] pci 0000:01:00.0: PME# disabled [ 16.356520] pci 0000:01:00.1: [14e4:163a] type 0 class 0x000200 [ 16.362471] pci 0000:01:00.1: reg 10: [mem 0xd8000000-0xd9ffffff 64bit] [ 16.369293] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 16.375378] pci 0000:01:00.1: PME# disabled [ 16.379677] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 16.384911] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 16.392032] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd9ffffff] [ 16.398885] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 16.407271] pci 0000:03:00.0: [14e4:163a] type 0 class 0x000200 [ 16.413214] pci 0000:03:00.0: reg 10: [mem 0xda000000-0xdbffffff 64bit] [ 16.420036] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 16.426123] pci 0000:03:00.0: PME# disabled [ 16.430430] pci 0000:03:00.1: [14e4:163a] type 0 class 0x000200 [ 16.436383] pci 0000:03:00.1: reg 10: [mem 0xdc000000-0xddffffff 64bit] [ 16.443213] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold [ 16.449296] pci 0000:03:00.1: PME# disabled [ 16.453593] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 16.458830] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled) [ 16.465937] pci 0000:00:07.0: bridge window [mem 0xda000000-0xddffffff] [ 16.472789] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 16.481134] pci 0000:00:08.0: PCI bridge to [bus 04-04] [ 16.486349] pci 0000:00:08.0: bridge window [io 0xf000-0x0000] (disabled) [ 16.493456] pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 16.501263] pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 16.509604] pci 0000:00:09.0: PCI bridge to [bus 05-05] [ 16.514818] pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled) [ 16.521926] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 16.529732] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 16.538094] pci 0000:02:00.0: [1000:0060] type 0 class 0x000104 [ 16.544041] pci 0000:02:00.0: reg 10: [mem 0xdf040000-0xdf07ffff 64bit] [ 16.550692] pci 0000:02:00.0: reg 18: [io 0xfc00-0xfcff] [ 16.556164] pci 0000:02:00.0: reg 1c: [mem 0xdf080000-0xdf0bffff 64bit] [ 16.562848] pci 0000:02:00.0: reg 30: [mem 0xdf0f8000-0xdf0fffff pref] [ 16.569483] pci 0000:02:00.0: supports D1 [ 16.573537] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 16.578871] pci 0000:00:1c.0: bridge window [io 0xf000-0xffff] [ 16.585022] pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf0fffff] [ 16.591877] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 16.600194] pci 0000:06:03.0: [102b:0532] type 0 class 0x000300 [ 16.606134] pci 0000:06:03.0: reg 10: [mem 0xd5800000-0xd5ffffff pref] [ 16.612703] pci 0000:06:03.0: reg 14: [mem 0xdeffc000-0xdeffffff] [ 16.618855] pci 0000:06:03.0: reg 18: [mem 0xde000000-0xde7fffff] [ 16.625077] pci 0000:06:03.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 16.631731] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode) [ 16.638766] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 16.645874] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff] [ 16.652725] pci 0000:00:1e.0: bridge window [mem 0xd5800000-0xd5ffffff 64bit pref] [ 16.660516] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 16.668490] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 16.676463] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 16.685130] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfdffffff] (subtractive decode) [ 16.693797] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) [ 16.702530] pci_bus 0000:00: on NUMA node 0 [ 16.706714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 16.714003] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 16.720507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT] [ 16.727044] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX8._PRT] [ 16.733567] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT] [ 16.740098] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT] [ 16.746568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT] (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:01.0 (XEN) PCI add device 00:07.0 (XEN) PCI add device 00:08.0 (XEN) PCI add device 00:09.0 (XEN) PCI add device 00:14.0 (XEN) PCI add device 00:14.1 (XEN) PCI add device 00:14.2 (XEN) PCI add device 00:1a.0 (XEN) PCI add device 00:1a.1 (XEN) PCI add device 00:1a.7 (XEN) PCI add device 00:1c.0 (XEN) PCI add device 00:1d.0 (XEN) PCI add device 00:1d.1 (XEN) PCI add device 00:1d.2 (XEN) PCI add device 00:1d.7 (XEN) PCI add device 00:1e.0 (XEN) PCI add device 00:1f.0 (XEN) PCI add device 01:00.0 (XEN) PCI add device 01:00.1 (XEN) PCI add device 03:00.0 (XEN) PCI add device 03:00.1 (XEN) PCI add device 02:00.0 (XEN) PCI add device 06:03.0 [ 16.827977] initcall acpi_pci_root_init+0x0/0x2d returned 0 after 31245 usecs [ 16.835098] calling acpi_pci_link_init+0x0/0x43 @ 1 [ 16.840281] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15) [ 16.847219] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15) [ 16.854147] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15) [ 16.861078] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15) [ 16.868008] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 16.874939] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15) [ 16.881863] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 16.889918] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15) [ 16.896884] initcall acpi_pci_link_init+0x0/0x43 returned 0 after 8787 usecs [ 16.903921] calling pnp_init+0x0/0x12 @ 1 [ 16.908212] initcall pnp_init+0x0/0x12 returned 0 after 976 usecs [ 16.914297] calling xen_setup_shutdown_event+0x0/0x22 @ 1 [ 16.919842] initcall xen_setup_shutdown_event+0x0/0x22 returned 0 after 0 usecs [ 16.927210] calling xenbus_probe_backend_init+0x0/0x2d @ 1 [ 16.932977] initcall xenbus_probe_backend_init+0x0/0x2d returned 0 after 976 usecs [ 16.940531] calling balloon_init+0x0/0x1ea @ 1 [ 16.945123] xen_balloon: Initialising balloon driver. [ 16.950488] last_pfn = 0x580000 max_arch_pfn = 0x400000000 [ 17.069063] initcall balloon_init+0x0/0x1ea returned 0 after 106429 usecs [ 17.075840] calling misc_init+0x0/0xb8 @ 1 [ 17.080297] initcall misc_init+0x0/0xb8 returned 0 after 976 usecs [ 17.086466] calling vga_arb_device_init+0x0/0x78 @ 1 [ 17.091827] vgaarb: device added: PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none [ 17.099901] vgaarb: loaded [ 17.102676] initcall vga_arb_device_init+0x0/0x78 returned 0 after 976 usecs [ 17.109780] calling cn_init+0x0/0x9e @ 1 [ 17.113885] initcall cn_init+0x0/0x9e returned 0 after 976 usecs [ 17.119920] calling init_scsi+0x0/0x92 @ 1 [ 17.124647] SCSI subsystem initialized [ 17.128390] initcall init_scsi+0x0/0x92 returned 0 after 976 usecs [ 17.134631] calling ata_init+0x0/0x310 @ 1 [ 17.139327] libata version 3.00 loaded. [ 17.143159] initcall ata_init+0x0/0x310 returned 0 after 976 usecs [ 17.149396] calling phy_init+0x0/0x31 @ 1 [ 17.153924] initcall phy_init+0x0/0x31 returned 0 after 976 usecs [ 17.160006] calling init_pcmcia_cs+0x0/0x25 @ 1 [ 17.164814] initcall init_pcmcia_cs+0x0/0x25 returned 0 after 976 usecs [ 17.171412] calling usb_init+0x0/0x175 @ 1 [ 17.175950] usbcore: registered new interface driver usbfs [ 17.181579] usbcore: registered new interface driver hub [ 17.187081] usbcore: registered new device driver usb [ 17.192119] initcall usb_init+0x0/0x175 returned 0 after 2929 usecs [ 17.198444] calling serio_init+0x0/0x31 @ 1 [ 17.202912] initcall serio_init+0x0/0x31 returned 0 after 976 usecs [ 17.209164] calling input_init+0x0/0x106 @ 1 [ 17.213726] initcall input_init+0x0/0x106 returned 0 after 976 usecs [ 17.220067] calling rtc_init+0x0/0x71 @ 1 [ 17.224355] initcall rtc_init+0x0/0x71 returned 0 after 976 usecs [ 17.230435] calling power_supply_class_init+0x0/0x44 @ 1 [ 17.236020] initcall power_supply_class_init+0x0/0x44 returned 0 after 976 usecs [ 17.243400] calling hwmon_init+0x0/0xee @ 1 [ 17.247872] initcall hwmon_init+0x0/0xee returned 0 after 976 usecs [ 17.254120] calling md_init+0x0/0x143 @ 1 [ 17.258404] initcall md_init+0x0/0x143 returned 0 after 976 usecs [ 17.264488] calling leds_init+0x0/0x48 @ 1 [ 17.268861] initcall leds_init+0x0/0x48 returned 0 after 976 usecs [ 17.275025] calling pci_subsys_init+0x0/0x4d @ 1 [ 17.279791] PCI: Using ACPI for IRQ routing [ 17.284040] PCI: pci_cache_line_size set to 64 bytes [ 17.289303] initcall pci_subsys_init+0x0/0x4d returned 0 after 0 usecs [ 17.295818] calling proto_init+0x0/0x12 @ 1 [ 17.300156] initcall proto_init+0x0/0x12 returned 0 after 0 usecs [ 17.306306] calling net_dev_init+0x0/0x1e4 @ 1 [ 17.311490] initcall net_dev_init+0x0/0x1e4 returned 0 after 976 usecs [ 17.318005] calling neigh_init+0x0/0x71 @ 1 [ 17.322338] initcall neigh_init+0x0/0x71 returned 0 after 0 usecs [ 17.328490] calling fib_rules_init+0x0/0xa6 @ 1 [ 17.333173] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs [ 17.339672] calling pktsched_init+0x0/0xed @ 1 [ 17.344271] initcall pktsched_init+0x0/0xed returned 0 after 0 usecs [ 17.350679] calling tc_filter_init+0x0/0x4c @ 1 [ 17.355360] initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs [ 17.361861] calling tc_action_init+0x0/0x4c @ 1 [ 17.366540] initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs [ 17.373041] calling genl_init+0x0/0x84 @ 1 [ 17.377312] initcall genl_init+0x0/0x84 returned 0 after 976 usecs [ 17.383528] calling cipso_v4_init+0x0/0x67 @ 1 [ 17.388122] initcall cipso_v4_init+0x0/0x67 returned 0 after 0 usecs [ 17.394552] calling cfg80211_init+0x0/0xc6 @ 1 [ 17.399552] cfg80211: Calling CRDA to update world regulatory domain [ 17.405960] initcall cfg80211_init+0x0/0xc6 returned 0 after 1952 usecs [ 17.412562] calling wireless_nlevent_init+0x0/0x12 @ 1 [ 17.417877] initcall wireless_nlevent_init+0x0/0x12 returned 0 after 976 usecs [ 17.425129] calling ieee80211_init+0x0/0x3a @ 1 [ 17.430152] initcall ieee80211_init+0x0/0x3a returned 0 after 976 usecs [ 17.436753] calling netlbl_init+0x0/0x83 @ 1 [ 17.441168] NetLabel: Initializing [ 17.444636] NetLabel: domain hash size = 128 [ 17.449056] NetLabel: protocols = UNLABELED CIPSOv4 [ 17.454099] NetLabel: unlabeled traffic allowed by default [ 17.459718] initcall netlbl_init+0x0/0x83 returned 0 after 0 usecs [ 17.465959] calling rfkill_init+0x0/0x79 @ 1 [ 17.470657] initcall rfkill_init+0x0/0x79 returned 0 after 976 usecs [ 17.476991] calling sysctl_init+0x0/0x49 @ 1 [ 17.481413] initcall sysctl_init+0x0/0x49 returned 0 after 0 usecs [ 17.487652] calling xen_mc_debugfs+0x0/0x118 @ 1 [ 17.492489] initcall xen_mc_debugfs+0x0/0x118 returned 0 after 976 usecs [ 17.499179] calling xen_mmu_debugfs+0x0/0x2df @ 1 [ 17.504177] initcall xen_mmu_debugfs+0x0/0x2df returned 0 after 976 usecs [ 17.510951] calling xen_spinlock_debugfs+0x0/0x24e @ 1 [ 17.516351] initcall xen_spinlock_debugfs+0x0/0x24e returned 0 after 976 usecs [ 17.523561] calling print_ICs+0x0/0x509 @ 1 [ 17.527894] initcall print_ICs+0x0/0x509 returned 0 after 0 usecs [ 17.534046] calling hpet_late_init+0x0/0x200 @ 1 [ 17.538812] initcall hpet_late_init+0x0/0x200 returned -19 after 0 usecs [ 17.545572] calling init_amd_nbs+0x0/0x3f @ 1 [ 17.550124] initcall init_amd_nbs+0x0/0x3f returned 0 after 0 usecs [ 17.556406] calling clocksource_done_booting+0x0/0x5a @ 1 [ 17.561955] Switching to clocksource xen [ 17.566019] initcall clocksource_done_booting+0x0/0x5a returned 0 after 991 usecs [ 17.573482] calling rb_init_debugfs+0x0/0x2f @ 1 [ 17.578261] initcall rb_init_debugfs+0x0/0x2f returned 0 after 11 usecs [ 17.580191] Switched to NOHz mode on CPU #7 [ 17.580325] Switched to NOHz mode on CPU #3 [ 17.580626] Switched to NOHz mode on CPU #4 [ 17.580782] Switched to NOHz mode on CPU #6 [ 17.580800] Switched to NOHz mode on CPU #2 [ 17.580935] Switched to NOHz mode on CPU #5 [ 17.581134] Switched to NOHz mode on CPU #1 [ 17.614738] calling tracer_init_debugfs+0x0/0x330 @ 1 [ 17.620112] Switched to NOHz mode on CPU #0 [ 17.624670] initcall tracer_init_debugfs+0x0/0x330 returned 0 after 4619 usecs [ 17.631872] calling init_trace_printk_function_export+0x0/0x2f @ 1 [ 17.638205] initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 5 usecs [ 17.646345] calling event_trace_init+0x0/0x2b6 @ 1 [ 17.658209] initcall event_trace_init+0x0/0x2b6 returned 0 after 6758 usecs [ 17.665154] calling init_kprobe_trace+0x0/0x78 @ 1 [ 17.670125] initcall init_kprobe_trace+0x0/0x78 returned 0 after 30 usecs [ 17.676941] calling init_pipe_fs+0x0/0x4c @ 1 [ 17.681466] initcall init_pipe_fs+0x0/0x4c returned 0 after 18 usecs [ 17.687861] calling eventpoll_init+0x0/0xef @ 1 [ 17.692544] initcall eventpoll_init+0x0/0xef returned 0 after 3 usecs [ 17.699040] calling anon_inode_init+0x0/0x12b @ 1 [ 17.703934] initcall anon_inode_init+0x0/0x12b returned 0 after 37 usecs [ 17.710654] calling blk_scsi_ioctl_init+0x0/0x289 @ 1 [ 17.715858] initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 0 usecs [ 17.722876] calling acpi_event_init+0x0/0x80 @ 1 [ 17.727670] initcall acpi_event_init+0x0/0x80 returned 0 after 25 usecs [ 17.734316] calling pnp_system_init+0x0/0x12 @ 1 [ 17.739242] initcall pnp_system_init+0x0/0x12 returned 0 after 153 usecs [ 17.745931] calling pnpacpi_init+0x0/0x8c @ 1 [ 17.750435] pnp: PnP ACPI init [ 17.753570] ACPI: bus type pnp registered [ 17.757979] pnp 00:00: [bus 00-ff] [ 17.761374] pnp 00:00: [io 0x0cf8-0x0cff] [ 17.765534] pnp 00:00: [io 0x0000-0x0cf7 window] [ 17.770302] pnp 00:00: [io 0x0d00-0xffff window] [ 17.775067] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 17.780528] pnp 00:00: [mem 0xc0000000-0xfdffffff window] [ 17.785988] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 17.791716] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 17.799090] pnp 00:01: [io 0x0080-0x009f] [ 17.803174] pnp 00:01: [io 0x0000-0x001f] [ 17.807335] pnp 00:01: [io 0x00c0-0x00df] [ 17.811495] pnp 00:01: [dma 4] [ 17.814839] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 17.821400] pnp 00:02: [io 0x00f0-0x00ff] [ 17.825511] xen: registering gsi 13 triggering 1 polarity 0 [ 17.831146] xen_map_pirq_gsi: returning irq 13 for gsi 13 [ 17.836604] xen: --> pirq=13 -> irq=13 (XEN) IOAPIC[0]: Set PCI routing entry (0-13 -> 0x78 -> IRQ 13 Mode:0 Active:0) [ 17.847452] pnp 00:02: [irq 13] [ 17.850863] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) [ 17.857434] pnp 00:03: [io 0x0061] [ 17.861230] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active) [ 17.868082] pnp 00:04: [io 0x0070-0x007f] [ 17.872175] xen: registering gsi 8 triggering 1 polarity 0 [ 17.877720] xen_map_pirq_gsi: returning irq 8 for gsi 8 [ 17.883007] xen: --> pirq=8 -> irq=8 (XEN) IOAPIC[0]: Set PCI routing entry (0-8 -> 0x50 -> IRQ 8 Mode:0 Active:0) [ 17.893513] pnp 00:04: [irq 8] [ 17.896839] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 17.903846] pnp 00:05: [io 0x03f8-0x03ff] [ 17.907935] xen: registering gsi 4 triggering 1 polarity 0 [ 17.913480] xen_map_pirq_gsi: returning irq 4 for gsi 4 [ 17.918766] xen: --> pirq=4 -> irq=4 [ 17.922419] Already setup the GSI :4 [ 17.926048] pnp 00:05: [irq 4] [ 17.929485] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 17.936648] pnp 00:06: [io 0x0800-0x087f] [ 17.940731] pnp 00:06: [io 0x00e0-0x00e7] [ 17.944908] pnp 00:06: [io 0x0880-0x08ff] [ 17.949066] pnp 00:06: [io 0x0900-0x091f] [ 17.953228] pnp 00:06: [io 0x0920-0x0923] [ 17.957388] pnp 00:06: [io 0x0924] [ 17.960940] pnp 00:06: [io 0x0ca0-0x0ca7] [ 17.965101] pnp 00:06: [io 0x0ca9-0x0cab] [ 17.969261] pnp 00:06: [io 0x0cad-0x0caf] [ 17.973421] pnp 00:06: [io 0x0060-0x005f disabled] [ 17.978364] pnp 00:06: [io 0x0064-0x0063 disabled] [ 17.983597] system 00:06: [io 0x0800-0x087f] has been reserved [ 17.989501] system 00:06: [io 0x0880-0x08ff] could not be reserved [ 17.995825] system 00:06: [io 0x0900-0x091f] has been reserved [ 18.001806] system 00:06: [io 0x0920-0x0923] has been reserved [ 18.007787] system 00:06: [io 0x0924] has been reserved [ 18.013160] system 00:06: [io 0x0ca0-0x0ca7] has been reserved [ 18.019140] system 00:06: [io 0x0ca9-0x0cab] has been reserved [ 18.025121] system 00:06: [io 0x0cad-0x0caf] has been reserved [ 18.031104] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 18.038077] pnp 00:07: [io 0x0ca8] [ 18.041552] pnp 00:07: [io 0x0cac] [ 18.045106] pnp 00:07: [irq 0 disabled] [ 18.049306] system 00:07: [io 0x0ca8] has been reserved [ 18.054606] system 00:07: [io 0x0cac] has been reserved [ 18.059982] system 00:07: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 18.068569] pnp 00:08: [mem 0xe0000000-0xefffffff] [ 18.073650] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 18.080254] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 18.087259] pnp 00:09: [mem 0xfed00000-0xfed003ff] [ 18.092285] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) [ 18.098833] pnp 00:0a: [mem 0xfed90000-0xfed91fff] [ 18.104000] system 00:0a: [mem 0xfed90000-0xfed91fff] has been reserved [ 18.110608] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 18.118123] pnp: PnP ACPI: found 11 devices [ 18.122293] ACPI: ACPI bus type pnp unregistered [ 18.126977] initcall pnpacpi_init+0x0/0x8c returned 0 after 367710 usecs [ 18.133734] calling chr_dev_init+0x0/0xcb @ 1 [ 18.153165] initcall chr_dev_init+0x0/0xcb returned 0 after 14573 usecs [ 18.159760] calling firmware_class_init+0x0/0x19 @ 1 [ 18.165034] initcall firmware_class_init+0x0/0x19 returned 0 after 154 usecs [ 18.172068] calling init_pcmcia_bus+0x0/0x65 @ 1 [ 18.177005] initcall init_pcmcia_bus+0x0/0x65 returned 0 after 165 usecs [ 18.183689] calling thermal_init+0x0/0x75 @ 1 [ 18.188357] initcall thermal_init+0x0/0x75 returned 0 after 156 usecs [ 18.194784] calling cpufreq_gov_performance_init+0x0/0x12 @ 1 [ 18.200678] initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 1 usecs [ 18.208390] calling cpufreq_gov_userspace_init+0x0/0x12 @ 1 [ 18.214112] initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 usecs [ 18.221651] calling init_acpi_pm_clocksource+0x0/0xe6 @ 1 [ 18.234219] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 18.240815] initcall init_acpi_pm_clocksource+0x0/0xe6 returned -19 after 13296 usecs [ 18.248701] calling pcibios_assign_resources+0x0/0x76 @ 1 [ 18.254479] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 18.259690] pci 0000:00:01.0: bridge window [io disabled] [ 18.265419] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd9ffffff] [ 18.272262] pci 0000:00:01.0: bridge window [mem pref disabled] [ 18.278422] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 18.283697] pci 0000:00:07.0: bridge window [io disabled] [ 18.289426] pci 0000:00:07.0: bridge window [mem 0xda000000-0xddffffff] [ 18.296271] pci 0000:00:07.0: bridge window [mem pref disabled] [ 18.302430] pci 0000:00:08.0: PCI bridge to [bus 04-04] [ 18.307705] pci 0000:00:08.0: bridge window [io disabled] [ 18.313433] pci 0000:00:08.0: bridge window [mem disabled] [ 18.319150] pci 0000:00:08.0: bridge window [mem pref disabled] [ 18.325312] pci 0000:00:09.0: PCI bridge to [bus 05-05] [ 18.330585] pci 0000:00:09.0: bridge window [io disabled] [ 18.336314] pci 0000:00:09.0: bridge window [mem disabled] [ 18.342035] pci 0000:00:09.0: bridge window [mem pref disabled] [ 18.348192] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 18.353470] pci 0000:00:1c.0: bridge window [io 0xf000-0xffff] [ 18.359630] pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf0fffff] [ 18.366474] pci 0000:00:1c.0: bridge window [mem pref disabled] [ 18.372642] pci 0000:06:03.0: BAR 6: assigned [mem 0xde800000-0xde80ffff pref] [ 18.379901] pci 0000:00:1e.0: PCI bridge to [bus 06-06] [ 18.385188] pci 0000:00:1e.0: bridge window [io disabled] [ 18.390917] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff] [ 18.397778] pci 0000:00:1e.0: bridge window [mem 0xd5800000-0xd5ffffff 64bit pref] [ 18.405599] xen: registering gsi 53 triggering 0 polarity 1 [ 18.411236] xen: --> pirq=53 -> irq=53 (XEN) IOAPIC[1]: Set PCI routing entry (1-21 -> 0x98 -> IRQ 53 Mode:1 Active:1) [ 18.422052] pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 18.428807] pci 0000:00:01.0: setting latency timer to 64 [ 18.434275] xen: registering gsi 53 triggering 0 polarity 1 [ 18.439894] xen_map_pirq_gsi: returning irq 53 for gsi 53 [ 18.445370] xen: --> pirq=53 -> irq=53 [ 18.449196] Already setup the GSI :53 [ 18.452912] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 18.459679] pci 0000:00:07.0: setting latency timer to 64 [ 18.465147] xen: registering gsi 53 triggering 0 polarity 1 [ 18.470765] xen_map_pirq_gsi: returning irq 53 for gsi 53 [ 18.476224] xen: --> pirq=53 -> irq=53 [ 18.480051] Already setup the GSI :53 [ 18.483766] pci 0000:00:08.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 18.490535] pci 0000:00:08.0: setting latency timer to 64 [ 18.496000] xen: registering gsi 53 triggering 0 polarity 1 [ 18.501622] xen_map_pirq_gsi: returning irq 53 for gsi 53 [ 18.507079] xen: --> pirq=53 -> irq=53 [ 18.510902] Already setup the GSI :53 [ 18.514622] pci 0000:00:09.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 18.521387] pci 0000:00:09.0: setting latency timer to 64 [ 18.526856] xen: registering gsi 16 triggering 0 polarity 1 [ 18.532495] xen: --> pirq=16 -> irq=16 (XEN) IOAPIC[0]: Set PCI routing entry (0-16 -> 0xa0 -> IRQ 16 Mode:1 Active:1) [ 18.543319] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 18.550076] pci 0000:00:1c.0: setting latency timer to 64 [ 18.555547] pci 0000:00:1e.0: setting latency timer to 64 [ 18.560993] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 18.566626] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 18.572256] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 18.578583] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfdffffff] [ 18.584910] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 18.591237] pci_bus 0000:01: resource 1 [mem 0xd6000000-0xd9ffffff] [ 18.597563] pci_bus 0000:03: resource 1 [mem 0xda000000-0xddffffff] [ 18.603890] pci_bus 0000:02: resource 0 [io 0xf000-0xffff] [ 18.609524] pci_bus 0000:02: resource 1 [mem 0xdf000000-0xdf0fffff] [ 18.615852] pci_bus 0000:06: resource 1 [mem 0xde000000-0xdeffffff] [ 18.622178] pci_bus 0000:06: resource 2 [mem 0xd5800000-0xd5ffffff 64bit pref] [ 18.629555] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7] [ 18.635187] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff] [ 18.640820] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff] [ 18.647149] pci_bus 0000:06: resource 7 [mem 0xc0000000-0xfdffffff] [ 18.653475] pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff] [ 18.659805] initcall pcibios_assign_resources+0x0/0x76 returned 0 after 396050 usecs [ 18.667602] calling sysctl_core_init+0x0/0x38 @ 1 [ 18.672508] initcall sysctl_core_init+0x0/0x38 returned 0 after 50 usecs [ 18.679216] calling inet_init+0x0/0x259 @ 1 [ 18.683602] NET: Registered protocol family 2 [ 18.688218] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 18.697253] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 18.706442] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 18.713553] TCP: Hash tables configured (established 262144 bind 65536) [ 18.720154] TCP reno registered [ 18.723365] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 18.729797] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 18.736903] initcall inet_init+0x0/0x259 returned 0 after 52095 usecs [ 18.743328] calling af_unix_init+0x0/0x55 @ 1 [ 18.747834] NET: Registered protocol family 1 [ 18.752273] initcall af_unix_init+0x0/0x55 returned 0 after 4335 usecs [ 18.758842] calling pci_apply_final_quirks+0x0/0xef @ 1 [ 18.764296] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x001f [ 18.770808] pci 0000:00:1a.0: Performing full reset [ 18.775806] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x001f [ 18.782335] pci 0000:00:1a.1: Performing full reset [ 18.787363] pci 0000:00:1a.7: EHCI: BIOS handoff [ 18.802136] pt_hc: cmd = 0x0000 [ 18.808388] pci 0000:00:1d.0: Performing full reset [ 18.813377] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 18.819656] pci 0000:00:1d.1: Performing full reset [ 18.824639] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 18.830923] pci 0000:00:1d.2: Performing full reset [ 18.836042] pci 0000:06:03.0: Boot video device [ 18.840566] PCI: CLS 64 bytes, default 64 [ 18.844637] initcall pci_apply_final_quirks+0x0/0xef returned 0 after 78534 usecs [ 18.852177] calling populate_rootfs+0x0/0x221 @ 1 [ 18.857215] Trying to unpack rootfs image as initramfs... [ 18.877326] Freeing initrd memory: 6556k freed [ 18.884026] initcall populate_rootfs+0x0/0x221 returned 0 after 26352 usecs [ 18.890982] calling pci_iommu_init+0x0/0x41 @ 1 [ 18.895659] initcall pci_iommu_init+0x0/0x41 returned 0 after 0 usecs [ 18.902159] calling i8259A_init_sysfs+0x0/0x31 @ 1 [ 18.907559] initcall i8259A_init_sysfs+0x0/0x31 returned 0 after 447 usecs [ 18.914416] calling vsyscall_init+0x0/0x6c @ 1 [ 18.919089] initcall vsyscall_init+0x0/0x6c returned 0 after 79 usecs [ 18.925516] calling sbf_init+0x0/0xd7 @ 1 [ 18.929677] initcall sbf_init+0x0/0xd7 returned 0 after 0 usecs [ 18.935657] calling i8237A_init_sysfs+0x0/0x22 @ 1 [ 18.940909] initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 302 usecs [ 18.947810] calling init_tsc_clocksource+0x0/0x5f @ 1 [ 18.953015] initcall init_tsc_clocksource+0x0/0x5f returned 0 after 6 usecs [ 18.960028] calling add_rtc_cmos+0x0/0x92 @ 1 [ 18.964538] initcall add_rtc_cmos+0x0/0x92 returned 0 after 4 usecs [ 18.970865] calling cache_sysfs_init+0x0/0x59 @ 1 [ 18.982517] initcall cache_sysfs_init+0x0/0x59 returned 0 after 6638 usecs [ 18.989377] calling mcheck_init_device+0x0/0xf2 @ 1 [ 18.994403] initcall mcheck_init_device+0x0/0xf2 returned -5 after 0 usecs [ 19.001337] initcall mcheck_init_device+0x0/0xf2 returned with error code -5 [ 19.008527] calling msr_init+0x0/0x10b @ 1 [ 19.014639] initcall msr_init+0x0/0x10b returned 0 after 1814 usecs [ 19.020888] calling cpuid_init+0x0/0x10b @ 1 [ 19.026959] initcall cpuid_init+0x0/0x10b returned 0 after 1611 usecs [ 19.033387] calling ioapic_init_sysfs+0x0/0x99 @ 1 [ 19.038818] initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 477 usecs [ 19.045679] calling add_pcspkr+0x0/0x3a @ 1 [ 19.050215] initcall add_pcspkr+0x0/0x3a returned 0 after 198 usecs [ 19.056466] calling microcode_init+0x0/0x129 @ 1 (XEN) traps.c:2320:d0 Domain attempted WRMSR 000000000000008b from 00000011:00000000 to 00000000:00000000. [ 19.070774] microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x11 (XEN) traps.c:2320:d0 Domain attempted WRMSR 000000000000008b from 00000011:00000000 to 00000000:00000000. [ 19.086025] microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x11 (XEN) traps.c:2320:d0 Domain attempted WRMSR 000000000000008b from 00000011:00000000 to 00000000:00000000. [ 19.101279] microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x11 (XEN) traps.c:2320:d0 Domain attempted WRMSR 000000000000008b from 00000011:00000000 to 00000000:00000000. [ 19.116532] microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x11 (XEN) traps.c:2320:d0 Domain attempted WRMSR 000000000000008b from 00000011:00000000 to 00000000:00000000. [ 19.131785] microcode: CPU4 sig=0x106a5, pf=0x1, revision=0x11 (XEN) traps.c:2320:d0 Domain attempted WRMSR 000000000000008b from 00000011:00000000 to 00000000:00000000. [ 19.147039] microcode: CPU5 sig=0x106a5, pf=0x1, revision=0x11 (XEN) traps.c:2320:d0 Domain attempted WRMSR 000000000000008b from 00000011:00000000 to 00000000:00000000. [ 19.162292] microcode: CPU6 sig=0x106a5, pf=0x1, revision=0x11 (XEN) traps.c:2320:d0 Domain attempted WRMSR 000000000000008b from 00000011:00000000 to 00000000:00000000. [ 19.177546] microcode: CPU7 sig=0x106a5, pf=0x1, revision=0x11 [ 19.183643] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 19.192410] initcall microcode_init+0x0/0x129 returned 0 after 128101 usecs [ 19.199432] calling start_periodic_check_for_corruption+0x0/0x37 @ 1 [ 19.205927] Scanning for low memory corruption every 60 seconds [ 19.211914] initcall start_periodic_check_for_corruption+0x0/0x37 returned 0 after 5845 usecs [ 19.220489] calling audit_classes_init+0x0/0xaf @ 1 [ 19.225549] initcall audit_classes_init+0x0/0xaf returned 0 after 32 usecs [ 19.232450] calling ia32_binfmt_init+0x0/0x14 @ 1 [ 19.237317] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 13 usecs [ 19.244064] calling proc_schedstat_init+0x0/0x22 @ 1 [ 19.249189] initcall proc_schedstat_init+0x0/0x22 returned 0 after 9 usecs [ 19.256111] calling proc_execdomains_init+0x0/0x22 @ 1 [ 19.261401] initcall proc_execdomains_init+0x0/0x22 returned 0 after 3 usecs [ 19.268505] calling ioresources_init+0x0/0x36 @ 1 [ 19.273364] initcall ioresources_init+0x0/0x36 returned 0 after 5 usecs [ 19.280032] calling uid_cache_init+0x0/0x6e @ 1 [ 19.284748] initcall uid_cache_init+0x0/0x6e returned 0 after 33 usecs [ 19.291300] calling init_posix_timers+0x0/0x1b5 @ 1 [ 19.296366] initcall init_posix_timers+0x0/0x1b5 returned 0 after 37 usecs [ 19.303263] calling init_posix_cpu_timers+0x0/0x101 @ 1 [ 19.308634] initcall init_posix_cpu_timers+0x0/0x101 returned 0 after 0 usecs [ 19.315826] calling nsproxy_cache_init+0x0/0x2d @ 1 [ 19.320885] initcall nsproxy_cache_init+0x0/0x2d returned 0 after 29 usecs [ 19.327789] calling create_proc_profile+0x0/0x249 @ 1 [ 19.332987] initcall create_proc_profile+0x0/0x249 returned 0 after 0 usecs [ 19.340008] calling timekeeping_init_device+0x0/0x22 @ 1 [ 19.345787] initcall timekeeping_init_device+0x0/0x22 returned 0 after 308 usecs [ 19.353165] calling init_clocksource_sysfs+0x0/0x50 @ 1 [ 19.358856] initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 308 usecs [ 19.366150] calling init_timer_list_procfs+0x0/0x2c @ 1 [ 19.371526] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 4 usecs [ 19.378713] calling init_tstats_procfs+0x0/0x2c @ 1 [ 19.383744] initcall init_tstats_procfs+0x0/0x2c returned 0 after 3 usecs [ 19.390588] calling futex_init+0x0/0x63 @ 1 [ 19.394981] initcall futex_init+0x0/0x63 returned 0 after 40 usecs [ 19.401178] calling proc_dma_init+0x0/0x22 @ 1 [ 19.405775] initcall proc_dma_init+0x0/0x22 returned 0 after 3 usecs [ 19.412185] calling proc_modules_init+0x0/0x22 @ 1 [ 19.417129] initcall proc_modules_init+0x0/0x22 returned 0 after 2 usecs [ 19.423886] calling kallsyms_init+0x0/0x25 @ 1 [ 19.428482] initcall kallsyms_init+0x0/0x25 returned 0 after 2 usecs [ 19.434892] calling snapshot_device_init+0x0/0x12 @ 1 [ 19.440312] initcall snapshot_device_init+0x0/0x12 returned 0 after 211 usecs [ 19.447495] calling crash_save_vmcoreinfo_init+0x0/0x4a5 @ 1 [ 19.453333] initcall crash_save_vmcoreinfo_init+0x0/0x4a5 returned 0 after 27 usecs [ 19.461015] calling crash_notes_memory_init+0x0/0x36 @ 1 [ 19.466485] initcall crash_notes_memory_init+0x0/0x36 returned 0 after 9 usecs [ 19.473756] calling user_namespaces_init+0x0/0x2d @ 1 [ 19.479001] initcall user_namespaces_init+0x0/0x2d returned 0 after 42 usecs [ 19.486063] calling pid_namespaces_init+0x0/0x2d @ 1 [ 19.491182] initcall pid_namespaces_init+0x0/0x2d returned 0 after 4 usecs [ 19.498110] calling audit_init+0x0/0x133 @ 1 [ 19.502530] audit: initializing netlink socket (disabled) [ 19.508050] type=2000 audit(1300452929.921:1): initialized [ 19.513540] initcall audit_init+0x0/0x133 returned 0 after 10750 usecs [ 19.520124] calling audit_watch_init+0x0/0x3a @ 1 [ 19.524978] initcall audit_watch_init+0x0/0x3a returned 0 after 0 usecs [ 19.531653] calling audit_tree_init+0x0/0x49 @ 1 [ 19.536419] initcall audit_tree_init+0x0/0x49 returned 0 after 0 usecs [ 19.543004] calling init_kprobes+0x0/0x14f @ 1 [ 19.577033] initcall init_kprobes+0x0/0x14f returned 0 after 28743 usecs [ 19.583715] calling utsname_sysctl_init+0x0/0x14 @ 1 [ 19.588876] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 47 usecs [ 19.595849] calling init_tracepoints+0x0/0x12 @ 1 [ 19.600704] initcall init_tracepoints+0x0/0x12 returned 0 after 0 usecs [ 19.607374] calling init_events+0x0/0x5f @ 1 [ 19.611798] initcall init_events+0x0/0x5f returned 0 after 2 usecs [ 19.618035] calling init_sched_switch_trace+0x0/0x12 @ 1 [ 19.623498] initcall init_sched_switch_trace+0x0/0x12 returned 0 after 1 usecs [ 19.630775] calling init_blk_tracer+0x0/0x57 @ 1 [ 19.635544] initcall init_blk_tracer+0x0/0x57 returned 0 after 0 usecs [ 19.642130] calling perf_event_sysfs_init+0x0/0x99 @ 1 [ 19.648145] initcall perf_event_sysfs_init+0x0/0x99 returned 0 after 708 usecs [ 19.655347] calling init_per_zone_wmark_min+0x0/0x70 @ 1 [ 19.662003] initcall init_per_zone_wmark_min+0x0/0x70 returned 0 after 1165 usecs [ 19.669465] calling kswapd_init+0x0/0x20 @ 1 [ 19.673985] initcall kswapd_init+0x0/0x20 returned 0 after 96 usecs [ 19.680240] calling setup_vmstat+0x0/0xae @ 1 [ 19.684817] initcall setup_vmstat+0x0/0xae returned 0 after 69 usecs [ 19.691159] calling mm_sysfs_init+0x0/0x29 @ 1 [ 19.695758] initcall mm_sysfs_init+0x0/0x29 returned 0 after 5 usecs [ 19.702165] calling proc_vmalloc_init+0x0/0x25 @ 1 [ 19.707109] initcall proc_vmalloc_init+0x0/0x25 returned 0 after 3 usecs [ 19.713866] calling procswaps_init+0x0/0x22 @ 1 [ 19.718551] initcall procswaps_init+0x0/0x22 returned 0 after 3 usecs [ 19.725046] calling hugetlb_init+0x0/0x2f2 @ 1 [ 19.729642] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 19.736063] initcall hugetlb_init+0x0/0x2f2 returned 0 after 6271 usecs [ 19.742728] calling slab_proc_init+0x0/0x25 @ 1 [ 19.747411] initcall slab_proc_init+0x0/0x25 returned 0 after 3 usecs [ 19.753908] calling slab_sysfs_init+0x0/0x104 @ 1 [ 19.771454] initcall slab_sysfs_init+0x0/0x104 returned 0 after 12392 usecs [ 19.778393] calling fcntl_init+0x0/0x2a @ 1 [ 19.782732] initcall fcntl_init+0x0/0x2a returned 0 after 6 usecs [ 19.788879] calling proc_filesystems_init+0x0/0x22 @ 1 [ 19.794172] initcall proc_filesystems_init+0x0/0x22 returned 0 after 4 usecs [ 19.801275] calling fsnotify_mark_init+0x0/0x3d @ 1 [ 19.806490] initcall fsnotify_mark_init+0x0/0x3d returned 0 after 182 usecs [ 19.813433] calling dnotify_init+0x0/0x7b @ 1 [ 19.818255] initcall dnotify_init+0x0/0x7b returned 0 after 304 usecs [ 19.824676] calling inotify_user_setup+0x0/0x70 @ 1 [ 19.829713] initcall inotify_user_setup+0x0/0x70 returned 0 after 10 usecs [ 19.836635] calling aio_setup+0x0/0xab @ 1 [ 19.841208] initcall aio_setup+0x0/0xab returned 0 after 316 usecs [ 19.847375] calling proc_locks_init+0x0/0x22 @ 1 [ 19.852146] initcall proc_locks_init+0x0/0x22 returned 0 after 4 usecs [ 19.858728] calling init_sys32_ioctl+0x0/0x28 @ 1 [ 19.863675] initcall init_sys32_ioctl+0x0/0x28 returned 0 after 92 usecs [ 19.870359] calling init_mbcache+0x0/0x14 @ 1 [ 19.874866] initcall init_mbcache+0x0/0x14 returned 0 after 0 usecs [ 19.881193] calling dquot_init+0x0/0x11b @ 1 [ 19.885612] VFS: Disk quotas dquot_6.5.2 [ 19.889983] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 19.896405] initcall dquot_init+0x0/0x11b returned 0 after 10537 usecs [ 19.902993] calling init_v2_quota_format+0x0/0x22 @ 1 [ 19.908193] initcall init_v2_quota_format+0x0/0x22 returned 0 after 1 usecs [ 19.915212] calling quota_init+0x0/0x26 @ 1 [ 19.919552] initcall quota_init+0x0/0x26 returned 0 after 6 usecs [ 19.925698] calling proc_cmdline_init+0x0/0x22 @ 1 [ 19.930643] initcall proc_cmdline_init+0x0/0x22 returned 0 after 4 usecs [ 19.937398] calling proc_consoles_init+0x0/0x22 @ 1 [ 19.942492] initcall proc_consoles_init+0x0/0x22 returned 0 after 3 usecs [ 19.949332] calling proc_cpuinfo_init+0x0/0x22 @ 1 [ 19.954276] initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 2 usecs [ 19.961033] calling proc_devices_init+0x0/0x22 @ 1 [ 19.965976] initcall proc_devices_init+0x0/0x22 returned 0 after 2 usecs [ 19.972733] calling proc_interrupts_init+0x0/0x22 @ 1 [ 19.977939] initcall proc_interrupts_init+0x0/0x22 returned 0 after 3 usecs [ 19.984954] calling proc_loadavg_init+0x0/0x22 @ 1 [ 19.989897] initcall proc_loadavg_init+0x0/0x22 returned 0 after 2 usecs [ 19.996654] calling proc_meminfo_init+0x0/0x22 @ 1 [ 20.001599] initcall proc_meminfo_init+0x0/0x22 returned 0 after 3 usecs [ 20.008355] calling proc_stat_init+0x0/0x22 @ 1 [ 20.013038] initcall proc_stat_init+0x0/0x22 returned 0 after 2 usecs [ 20.019535] calling proc_uptime_init+0x0/0x22 @ 1 [ 20.024392] initcall proc_uptime_init+0x0/0x22 returned 0 after 2 usecs [ 20.031065] calling proc_version_init+0x0/0x22 @ 1 [ 20.036006] initcall proc_version_init+0x0/0x22 returned 0 after 3 usecs [ 20.042763] calling proc_softirqs_init+0x0/0x22 @ 1 [ 20.047794] initcall proc_softirqs_init+0x0/0x22 returned 0 after 2 usecs [ 20.054637] calling proc_kcore_init+0x0/0xb5 @ 1 [ 20.059410] initcall proc_kcore_init+0x0/0xb5 returned 0 after 6 usecs [ 20.065989] calling vmcore_init+0x0/0x8e2 @ 1 [ 20.070497] initcall vmcore_init+0x0/0x8e2 returned 0 after 0 usecs [ 20.076824] calling proc_kmsg_init+0x0/0x25 @ 1 [ 20.081507] initcall proc_kmsg_init+0x0/0x25 returned 0 after 2 usecs [ 20.088004] calling proc_page_init+0x0/0x3c @ 1 [ 20.092690] initcall proc_page_init+0x0/0x3c returned 0 after 5 usecs [ 20.099185] calling init_devpts_fs+0x0/0x4c @ 1 [ 20.103952] initcall init_devpts_fs+0x0/0x4c returned 0 after 83 usecs [ 20.110461] calling init_ext3_fs+0x0/0x6b @ 1 [ 20.115408] initcall init_ext3_fs+0x0/0x6b returned 0 after 428 usecs [ 20.121831] calling init_ext2_fs+0x0/0x6a @ 1 [ 20.126563] initcall init_ext2_fs+0x0/0x6a returned 0 after 217 usecs [ 20.132986] calling ext4_init_fs+0x0/0x1e1 @ 1 [ 20.138611] initcall ext4_init_fs+0x0/0x1e1 returned 0 after 1004 usecs [ 20.145207] calling journal_init+0x0/0x99 @ 1 [ 20.150343] initcall journal_init+0x0/0x99 returned 0 after 612 usecs [ 20.156769] calling journal_init+0x0/0x14d @ 1 [ 20.161459] initcall journal_init+0x0/0x14d returned 0 after 94 usecs [ 20.167880] calling init_ramfs_fs+0x0/0x12 @ 1 [ 20.172475] initcall init_ramfs_fs+0x0/0x12 returned 0 after 2 usecs [ 20.178887] calling init_hugetlbfs_fs+0x0/0x98 @ 1 [ 20.184061] initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 226 usecs [ 20.190918] calling init_fat_fs+0x0/0x4f @ 1 [ 20.195750] initcall init_fat_fs+0x0/0x4f returned 0 after 402 usecs [ 20.202089] calling init_vfat_fs+0x0/0x12 @ 1 [ 20.206598] initcall init_vfat_fs+0x0/0x12 returned 0 after 2 usecs [ 20.212922] calling init_msdos_fs+0x0/0x12 @ 1 [ 20.217516] initcall init_msdos_fs+0x0/0x12 returned 0 after 1 usecs [ 20.223928] calling init_iso9660_fs+0x0/0x6c @ 1 [ 20.228958] initcall init_iso9660_fs+0x0/0x6c returned 0 after 253 usecs [ 20.235639] calling init_nls_cp437+0x0/0x12 @ 1 [ 20.240319] initcall init_nls_cp437+0x0/0x12 returned 0 after 1 usecs [ 20.246819] calling init_nls_ascii+0x0/0x12 @ 1 [ 20.251499] initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs [ 20.257999] calling init_nls_iso8859_1+0x0/0x12 @ 1 [ 20.263027] initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 usecs [ 20.269873] calling init_nls_utf8+0x0/0x25 @ 1 [ 20.274467] initcall init_nls_utf8+0x0/0x25 returned 0 after 0 usecs [ 20.280879] calling init_autofs4_fs+0x0/0x26 @ 1 [ 20.285843] initcall init_autofs4_fs+0x0/0x26 returned 0 after 190 usecs [ 20.292529] calling ipc_init+0x0/0x2f @ 1 [ 20.296695] msgmni has been set to 3195 [ 20.300597] initcall ipc_init+0x0/0x2f returned 0 after 3816 usecs [ 20.306829] calling ipc_sysctl_init+0x0/0x14 @ 1 [ 20.311672] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 74 usecs [ 20.318271] calling init_mqueue_fs+0x0/0xb4 @ 1 [ 20.323266] initcall init_mqueue_fs+0x0/0xb4 returned 0 after 306 usecs [ 20.329859] calling key_proc_init+0x0/0x53 @ 1 [ 20.334459] initcall key_proc_init+0x0/0x53 returned 0 after 7 usecs [ 20.340864] calling selinux_nf_ip_init+0x0/0x60 @ 1 [ 20.345890] SELinux: Registering netfilter hooks [ 20.350661] initcall selinux_nf_ip_init+0x0/0x60 returned 0 after 4657 usecs [ 20.357764] calling init_sel_fs+0x0/0x68 @ 1 [ 20.362434] initcall init_sel_fs+0x0/0x68 returned 0 after 241 usecs [ 20.368773] calling selnl_init+0x0/0x4d @ 1 [ 20.373126] initcall selnl_init+0x0/0x4d returned 0 after 19 usecs [ 20.379346] calling sel_netif_init+0x0/0x66 @ 1 [ 20.384031] initcall sel_netif_init+0x0/0x66 returned 0 after 4 usecs [ 20.390526] calling sel_netnode_init+0x0/0x72 @ 1 [ 20.395404] initcall sel_netnode_init+0x0/0x72 returned 0 after 5 usecs [ 20.402069] calling sel_netport_init+0x0/0x72 @ 1 [ 20.406928] initcall sel_netport_init+0x0/0x72 returned 0 after 3 usecs [ 20.413599] calling aurule_init+0x0/0x37 @ 1 [ 20.418018] initcall aurule_init+0x0/0x37 returned 0 after 0 usecs [ 20.424259] calling crypto_wq_init+0x0/0x31 @ 1 [ 20.429019] initcall crypto_wq_init+0x0/0x31 returned 0 after 78 usecs [ 20.435526] calling crypto_algapi_init+0x0/0xd @ 1 [ 20.440470] initcall crypto_algapi_init+0x0/0xd returned 0 after 4 usecs [ 20.447278] calling skcipher_module_init+0x0/0x37 @ 1 [ 20.452477] initcall skcipher_module_init+0x0/0x37 returned 0 after 0 usecs [ 20.459499] calling chainiv_module_init+0x0/0x12 @ 1 [ 20.464613] initcall chainiv_module_init+0x0/0x12 returned 0 after 1 usecs [ 20.471544] calling eseqiv_module_init+0x0/0x12 @ 1 [ 20.476573] initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs [ 20.483419] calling hmac_module_init+0x0/0x12 @ 1 [ 20.488273] initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs [ 20.494945] calling md5_mod_init+0x0/0x12 @ 1 [ 20.499556] initcall md5_mod_init+0x0/0x12 returned 0 after 100 usecs [ 20.505980] calling sha1_generic_mod_init+0x0/0x12 @ 1 [ 20.511366] initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 97 usecs [ 20.518485] calling crypto_ecb_module_init+0x0/0x12 @ 1 [ 20.523860] initcall crypto_ecb_module_init+0x0/0x12 returned 0 after 0 usecs [ 20.531053] calling crypto_cbc_module_init+0x0/0x12 @ 1 [ 20.536426] initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 usecs [ 20.543619] calling des_generic_mod_init+0x0/0x3f @ 1 [ 20.549019] initcall des_generic_mod_init+0x0/0x3f returned 0 after 192 usecs [ 20.556136] calling aes_init+0x0/0x12 @ 1 [ 20.560402] initcall aes_init+0x0/0x12 returned 0 after 102 usecs [ 20.566484] calling arc4_init+0x0/0x12 @ 1 [ 20.570831] initcall arc4_init+0x0/0_init+0x0/0x12 @ 1 [ 20.582621] initcall crypto_g krng_mod_init+0x0/0x12 @ 1 [ 20.594873] initcall krng_mod_init+0x0/0x12 re1 [ 20.606161] initcall proc_genhd_init+0x0/0x36 returned 0 after 7 usecs [ 20.612739] calling bsg_init+0x0/0x12e @ 1 [ 20.617367] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 20.624745] initcall bsg_init+0x0/0x12e returned 0 after 7574 usecs [ 20.631070] calling noop_init+0x0/0x14 @ 1 [ 20.635318] io scheduler noop registered [ 20.639305] initcall noop_init+0x0/0x14 returned 0 after 3894 usecs [ 20.645631] calling deadline_init+0x0/0x14 @ 1 [ 20.650223] io scheduler deadline registered [ 20.654557] initcall deadline_init+0x0/0x14 returned 0 after 4231 usecs [ 20.661231] calling cfq_init+0x0/0x9e @ 1 [ 20.665633] io scheduler cfq registered (default) [ 20.670325] initcall cfq_init+0x0/0x9e returned 0 after 4815 usecs [ 20.676563] calling percpu_counter_startup+0x0/0x19 @ 1 [ 20.681939] initcall percpu_counter_startup+0x0/0x19 returned 0 after 1 usecs [ 20.689130] calling pci_proc_init+0x0/0x6a @ 1 [ 20.693928] initcall pci_proc_init+0x0/0x6a returned 0 after 198 usecs [ 20.700432] calling pcie_portdrv_init+0x0/0x7b @ 1 [ 20.706026] pcieport 0000:00:1c.0: setting latency timer to 64 [ 20.712460] initcall pcie_portdrv_init+0x0/0x7b returned 0 after 6920 usecs [ 20.719405] calling aer_service_init+0x0/0x24 @ 1 [ 20.724456] initcall aer_service_init+0x0/0x24 returned 0 after 187 usecs [ 20.731227] calling ioapic_init+0x0/0x1b @ 1 [ 20.735835] initcall ioapic_init+0x0/0x1b returned 0 after 181 usecs [ 20.742173] calling pci_hotplug_init+0x0/0x1d @ 1 [ 20.747025] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 20.752661] initcall pci_hotplug_init+0x0/0x1d returned 0 after 5501 usecs [ 20.759593] calling fb_console_init+0x0/0x12b @ 1 [ 20.764639] initcall fb_console_init+0x0/0x12b returned 0 after 185 usecs [ 20.771408] calling genericbl_init+0x0/0x12 @ 1 [ 20.776251] initcall genericbl_init+0x0/0x12 returned 0 after 158 usecs [ 20.782848] calling efifb_init+0x0/0x1f2 @ 1 [ 20.787273] initcall efifb_init+0x0/0x1f2 returned -19 after 5 usecs [ 20.793681] calling acpi_reserve_resources+0x0/0xeb @ 1 [ 20.799060] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 3 usecs [ 20.806249] calling irqrouter_init_sysfs+0x0/0x38 @ 1 [ 20.811753] initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 295 usecs [ 20.818868] calling acpi_ac_init+0x0/0x45 @ 1 [ 20.823591] initcall acpi_ac_init+0x0/0x45 returned 0 after 209 usecs [ 20.830014] calling acpi_button_init+0x0/0x56 @ 1 [ 20.835178] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 20.842560] ACPI: Power Button [PWRF] [ 20.846492] initcall acpi_button_init+0x0/0x56 returned 0 after 11349 usecs [ 20.853433] calling acpi_fan_init+0x0/0x18 @ 1 [ 20.858229] initcall acpi_fan_init+0x0/0x18 returned 0 after 196 usecs [ 20.864734] calling acpi_video_init+0x0/0x70 @ 1 [ 20.869728] initcall acpi_video_init+0x0/0x70 returned 0 after 218 usecs [ 20.876412] calling acpi_processor_init+0x0/0xcd @ 1 [ 20.881522] ACPI: acpi_idle registered with cpuidle [ 20.889209] initcall acpi_processor_init+0x0/0xcd returned 0 after 7504 usecs [ 20.896325] calling acpi_container_init+0x0/0x4a @ 1 [ 20.904713] initcall acpi_container_init+0x0/0x4a returned 0 after 3194 usecs [ 20.911831] calling acpi_thermal_init+0x0/0x42 @ 1 [ 20.916977] initcall acpi_thermal_init+0x0/0x42 returned 0 after 199 usecs [ 20.923835] calling acpi_battery_init+0x0/0x16 @ 1 [ 20.928782] initcall acpi_battery_init+0x0/0x16 returned 0 after 7 usecs [ 20.928806] calling 1_acpi_battery_init_async+0x0/0x3c @ 5 [ 20.929090] initcall 1_acpi_battery_init_async+0x0/0x3c returned 0 after 268 usecs [ 20.948857] calling xenbus_probe_initcall+0x0/0x37 @ 1 [ 20.954143] initcall xenbus_probe_initcall+0x0/0x37 returned 0 after 0 usecs [ 20.961248] calling evtchn_init+0x0/0x6e @ 1 [ 20.965940] Event-channel device installed. [ 20.970109] initcall evtchn_init+0x0/0x6e returned 0 after 4333 usecs [ 20.976607] calling gntdev_init+0x0/0x4c @ 1 [ 20.981226] initcall gntdev_init+0x0/0x4c returned 0 after 192 usecs [ 20.987563] calling blkif_init+0x0/0x261 @ 1 [ 20.993221] initcall blkif_init+0x0/0x261 returned 0 after 1207 usecs [ 20.999644] calling xenfs_init+0x0/0x2d @ 1 [ 21.003981] initcall xenfs_init+0x0/0x2d returned 0 after 3 usecs [ 21.010130] calling hypervisor_subsys_init+0x0/0x25 @ 1 [ 21.015507] initcall hypervisor_subsys_init+0x0/0x25 returned 0 after 0 usecs [ 21.022698] calling hyper_sysfs_init+0x0/0xb3 @ 1 [ 21.027568] initcall hyper_sysfs_init+0x0/0xb3 returned 0 after 14 usecs [ 21.034313] calling platform_pci_module_init+0x0/0x29 @ 1 [ 21.039860] initcall platform_pci_module_init+0x0/0x29 returned -19 after 0 usecs [ 21.047402] calling pty_init+0x0/0x284 @ 1 [ 21.051886] initcall pty_init+0x0/0x284 returned 0 after 232 usecs [ 21.058054] calling sysrq_init+0x0/0x4d @ 1 [ 21.062393] initcall sysrq_init+0x0/0x4d returned 0 after 8 usecs [ 21.068540] calling xen_hvc_init+0x0/0xc8 @ 1 [ 21.074610] initcall xen_hvc_init+0x0/0xc8 returned 0 after 1526 usecs [ 21.081114] calling serial8250_init+0x0/0x160 @ 1 [ 21.085967] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 21.156249] initcall serial8250_init+0x0/0x160 returned 0 after 68632 usecs [ 21.163192] calling serial8250_pnp_init+0x0/0x12 @ 1 [ 21.184293] initcall serial8250_pnp_init+0x0/0x12 returned 0 after 15611 usecs [ 21.191498] calling serial8250_pci_init+0x0/0x1b @ 1 [ 21.196836] initcall serial8250_pci_init+0x0/0x1b returned 0 after 217 usecs [ 21.203867] calling rand_initialize+0x0/0x2c @ 1 [ 21.208649] initcall rand_initialize+0x0/0x2c returned 0 after 15 usecs [ 21.215305] calling hpet_init+0x0/0x6a @ 1 [ 21.219930] hpet_acpi_add: no address or irqs in _CRS [ 21.225148] initcall hpet_init+0x0/0x6a returned 0 after 5461 usecs [ 21.231400] calling nvram_init+0x0/0x82 @ 1 [ 21.235910] Non-volatile memory driver v1.3 [ 21.240078] initcall nvram_init+0x0/0x82 returned 0 after 4241 usecs [ 21.246489] calling mod_init+0x0/0x1f9 @ 1 [ 21.251044] initcall mod_init+0x0/0x1f9 returned -19 after 300 usecs [ 21.257375] calling mod_init+0x0/0xba @ 1 [ 21.261577] initcall mod_init+0x0/0xba returned -19 after 40 usecs [ 21.267775] calling mod_init+0x0/0x5a @ 1 [ 21.271936] initcall mod_init+0x0/0x5a returned -19 after 0 usecs [ 21.278090] calling agp_init+0x0/0x26 @ 1 [ 21.282249] Linux agpgart interface v0.103 [ 21.286410] initcall agp_init+0x0/0x26 returned 0 after 4063 usecs [ 21.292650] calling agp_amd64_mod_init+0x0/0x22 @ 1 [ 21.298051] initcall agp_amd64_mod_init+0x0/0x22 returned -19 after 362 usecs [ 21.305165] calling agp_intel_init+0x0/0x29 @ 1 [ 21.310050] initcall agp_intel_init+0x0/0x29 returned 0 after 198 usecs [ 21.316652] calling drm_core_init+0x0/0x129 @ 1 [ 21.321505] [drm] Initialized drm 1.1.0 20060810 [ 21.326106] initcall drm_core_init+0x0/0x129 returned 0 after 4664 usecs [ 21.332864] calling i915_init+0x0/0x86 @ 1 [ 21.337111] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module! [ 21.344652] initcall i915_init+0x0/0x86 returned -19 after 7363 usecs [ 21.351153] calling cn_proc_init+0x0/0x3d @ 1 [ 21.355661] initcall cn_proc_init+0x0/0x3d returned 0 after 2 usecs [ 21.361987] calling topology_sysfs_init+0x0/0x4e @ 1 [ 21.367193] initcall topology_sysfs_init+0x0/0x4e returned 0 after 90 usecs [ 21.374137] calling brd_init+0x0/0x19b @ 1 [ 21.385222] brd: module loaded [ 21.388267] initcall brd_init+0x0/0x19b returned 0 after 9649 usecs [ 21.394592] calling loop_init+0x0/0x1a0 @ 1 [ 21.402420] loop: module loaded [ 21.405547] initcall loop_init+0x0/0x1a0 returned 0 after 6450 usecs [ 21.411959] calling mac_hid_init+0x0/0x22 @ 1 [ 21.416501] initcall mac_hid_init+0x0/0x22 returned 0 after 34 usecs [ 21.422879] calling spi_transport_init+0x0/0x81 @ 1 [ 21.428253] initcall spi_transport_init+0x0/0x81 returned 0 after 336 usecs [ 21.435196] calling init_sd+0x0/0x161 @ 1 [ 21.439693] initcall init_sd+0x0/0x161 returned 0 after 327 usecs [ 21.445771] calling init_sr+0x0/0x49 @ 1 [ 21.450041] initcall init_sr+0x0/0x49 returned 0 after 191 usecs [ 21.456032] calling init_sg+0x0/0x122 @ 1 [ 21.460386] initcall init_sg+0x0/0x122 returned 0 after 188 usecs [ 21.466467] calling ahci_init+0x0/0x1b @ 1 [ 21.470918] initcall ahci_init+0x0/0x1b returned 0 after 197 usecs [ 21.477085] calling piix_init+0x0/0x29 @ 1 [ 21.481548] initcall piix_init+0x0/0x29 returned 0 after 210 usecs [ 21.487710] calling amd_init+0x0/0x1b @ 1 [ 21.492137] initcall amd_init+0x0/0x1b returned 0 after 259 usecs [ 21.498214] calling oldpiix_init+0x0/0x1b @ 1 [ 21.502921] initcall oldpiix_init+0x0/0x1b returned 0 after 194 usecs [ 21.509342] calling sch_init+0x0/0x1b @ 1 [ 21.513701] initcall sch_init+0x0/0x1b returned 0 after 190 usecs [ 21.519777] calling mpiix_init+0x0/0x1b @ 1 [ 21.524311] initcall mpiix_init+0x0/0x1b returned 0 after 194 usecs [ 21.530559] calling ata_generic_init+0x0/0x1b @ 1 [ 21.535608] initcall ata_generic_init+0x0/0x1b returned 0 after 188 usecs [ 21.542381] calling e1000_init_module+0x0/0x87 @ 1 [ 21.547321] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 21.554428] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 21.560440] initcall e1000_init_module+0x0/0x87 returned 0 after 12809 usecs [ 21.567472] calling e1000_init_module+0x0/0x3e @ 1 [ 21.572411] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2 [ 21.578478] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 21.584696] initcall e1000_init_module+0x0/0x3e returned 0 after 11994 usecs [ 21.591722] calling ne2k_pci_init+0x0/0x1b @ 1 [ 21.596515] initcall ne2k_pci_init+0x0/0x1b returned 0 after 192 usecs [ 21.603024] calling e100_init_module+0x0/0x5d @ 1 [ 21.607877] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 21.614030] e100: Copyright(c) 1999-2006 Intel Corporation [ 21.619784] initcall e100_init_module+0x0/0x5d returned 0 after 11626 usecs [ 21.626728] calling tg3_init+0x0/0x1b @ 1 [ 21.631108] initcall tg3_init+0x0/0x1b returned 0 after 212 usecs [ 21.637181] calling sky2_init_module+0x0/0x29 @ 1 [ 21.642033] sky2: driver version 1.28 [ 21.645971] initcall sky2_init_module+0x0/0x29 returned 0 after 3843 usecs [ 21.652826] calling net_olddevs_init+0x0/0xa0 @ 1 [ 21.657684] initcall net_olddevs_init+0x0/0xa0 returned 0 after 5 usecs [ 21.664351] calling init_nic+0x0/0x1b @ 1 [ 21.668715] initcall init_nic+0x0/0x1b returned 0 after 196 usecs [ 21.674787] calling netback_init+0x0/0x233 @ 1 [ 21.680383] initcall netback_init+0x0/0x233 returned 0 after 977 usecs [ 21.686897] calling rtl8139_init_module+0x0/0x1b @ 1 [ 21.692254] initcall rtl8139_init_module+0x0/0x1b returned 0 after 238 usecs [ 21.699280] calling tun_init+0x0/0x93 @ 1 [ 21.703439] tun: Universal TUN/TAP device driver, 1.6 [ 21.708553] tun: (C) 1999-2004 Max Krasnyansky [ 21.714992] initcall tun_init+0x0/0x93 returned 0 after 11280 usecs [ 21.721243] calling rtl8169_init_module+0x0/0x1b @ 1 [ 21.726563] initcall rtl8169_init_module+0x0/0x1b returned 0 after 201 usecs [ 21.733592] calling init_netconsole+0x0/0x1e7 @ 1 [ 21.738451] console [netcon0] enabled [ 21.742171] netconsole: network logging started [ 21.746766] initcall init_netconsole+0x0/0x1e7 returned 0 after 8124 usecs [ 21.753699] calling cdrom_init+0x0/0xd @ 1 [ 21.758020] initcall cdrom_init+0x0/0xd returned 0 after 70 usecs [ 21.764100] calling nonstatic_sysfs_init+0x0/0x12 @ 1 [ 21.769302] initcall nonstatic_sysfs_init+0x0/0x12 returned 0 after 1 usecs [ 21.776321] calling yenta_socket_init+0x0/0x1b @ 1 [ 21.781477] initcall yenta_socket_init+0x0/0x1b returned 0 after 208 usecs [ 21.788334] calling mon_init+0x0/0x103 @ 1 [ 21.792952] initcall mon_init+0x0/0x103 returned 0 after 361 usecs [ 21.799116] calling ehci_hcd_init+0x0/0xea @ 1 [ 21.803708] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 21.810295] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 21.816404] xen: registering gsi 19 triggering 0 polarity 1 [ 21.822045] xen: --> pirq=19 -> irq=19 (XEN) IOAPIC[0]: Set PCI routing entry (0-19 -> 0xb0 -> IRQ 19 Mode:1 Active:1) [ 21.832851] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 21.840147] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 21.845974] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 21.851362] drivers/usb/core/inode.c: creating file 'devices' [ 21.857096] drivers/usb/core/inode.c: creating file '001' [ 21.862807] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 21.878091] ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4 [ 21.887028] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 21.896604] ehci_hcd 0000:00:1a.7: debug port 1 [ 21.901122] ehci_hcd 0000:00:1a.7: reset command 0080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT [ 21.915322] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 21.922092] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 21.927945] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf1ff800 [ 21.933621] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 21.946531] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 21.960086] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 21.965903] usb usb1: default language 0x0409 [ 21.970275] usb usb1: udev 1, busnum 1, minor = 0 [ 21.975013] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 21.981861] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.989139] usb usb1: Product: EHCI Host Controller [ 21.994080] usb usb1: Manufacturer: Linux 2.6.38-rc8+ ehci_hcd [ 21.999973] usb usb1: SerialNumber: 0000:00:1a.7 [ 22.004899] usb usb1: usb_probe_device [ 22.008633] usb usb1: configuration #1 chosen from 1 choice [ 22.014292] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 22.020253] hub 1-0:1.0: usb_probe_interface [ 22.024510] hub 1-0:1.0: usb_probe_interface - got id [ 22.029624] hub 1-0:1.0: USB hub found [ 22.033459] hub 1-0:1.0: 4 ports detected [ 22.037510] hub 1-0:1.0: standalone hub [ 22.041410] hub 1-0:1.0: no power switching (usb 1.0) [ 22.046524] hub 1-0:1.0: individual port over-current protection [ 22.052591] hub 1-0:1.0: power on to power good time: 20ms [ 22.058160] hub 1-0:1.0: local power source is good [ 22.063078] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 22.070093] drivers/usb/core/inode.c: creating file '001' [ 22.075622] xen: registering gsi 21 triggering 0 polarity 1 [ 22.081200] xen: --> pirq=21 -> irq=21 (XEN) IOAPIC[0]: Set PCI routing entry (0-21 -> 0xb8 -> IRQ 21 Mode:1 Active:1) [ 22.092022] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 22.099245] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 22.105100] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 22.110389] drivers/usb/core/inode.c: creating file '002' [ 22.116076] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 22.128091] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 22.137028] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 22.146568] ehci_hcd 0000:00:1d.7: debug port 1 [ 22.151087] ehci_hcd 0000:00:1d.7: reset command 0080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT [ 22.165298] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 22.172068] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 22.177910] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf1ffc00 [ 22.183596] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 22.196477] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 22.204817] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 22.210082] e(XEN) IOAPIC[0]: Set PCI routing entry (0-17 -> 0xc0 -> IRQ 17 Mode:1 Active:1) hci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 22.210153] usb usb2: default language 0x0409 [ 22.210176] usb usb2: udev 1, busnum 2, minor = 128 [ 22.210180] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 22.210184] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 22.210188] usb usb2: Product: EHCI Host Controller [ 22.210192] usb usb2: Manufacturer: Linux 2.6.38-rc8+ ehci_hcd [ 22.210196] usb usb2: SerialNumber: 0000:00:1d.7 [ 22.210425] usb usb2: usb_probe_device [ 22.210430] usb usb2: configuration #1 chosen from 1 choice [ 22.210447] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 22.210625] hub 2-0:1.0: usb_probe_interface [ 22.210629] hub 2-0:1.0: usb_probe_interface - got id [ 22.210633] hub 2-0:1.0: USB hub found [ 22.210645] hub 2-0:1.0: 6 ports detected [ 22.210648] hub 2-0:1.0: standalone hub [ 22.210652] hub 2-0:1.0: no power switching (usb 1.0) [ 22.210655] hub 2-0:1.0: individual port over-current protection [ 22.210659] hub 2-0:1.0: power on to power good time: 20ms [ 22.210673] hub 2-0:1.0: local power source is good [ 22.210677] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 22.210762] drivers/usb/core/inode.c: creating file '001' [ 22.211031] initcall ehci_hcd_init+0x0/0xea returned 0 after 397772 usecs [ 22.211036] calling ohci_hcd_mod_init+0x0/0xba @ 1 [ 22.211040] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 22.211044] ohci_hcd: block sizes: ed 80 td 96 [ 22.211241] initcall ohci_hcd_mod_init+0x0/0xba returned 0 after 193 usecs [ 22.211247] calling uhci_hcd_init+0x0/0x10a @ 1 [ 22.211250] uhci_hcd: USB Universal Host Controller Interface driver [ 22.211512] xen: registering gsi 17 triggering 0 polarity 1 [ 22.211526] xen: --> pirq=17 -> irq=17 [ 22.218711] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 22.218728] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 22.218735] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 22.218746] drivers/usb/core/inode.c: creating file '003' [ 22.218976] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 22.414100] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT [ 22.422903] hub 2-0:1.0: port 2: status 0501 change 0001 [ 22.428261] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT [ 22.437093] hub 2-0:1.0: port 3: status 0501 change 0001 [ 22.442563] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001403 0 ACK POWER sig=k CSC CONNECT [ 22.451383] hub 2-0:1.0: port 4: status 0501 change 0001 [ 22.456784] uhci_hcd 0000:00:1a.0: detected 2 ports [ 22.461700] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 22.468433] uhci_hcd 0000:00:1a.0: Performing full reset [ 22.473906] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ec00 [ 22.479765] usb usb3: default language 0x0409 [ 22.484140] usb usb3: udev 1, busnum 3, minor = 256 [ 22.489043] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 22.495891] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 22.503170] usb usb3: Product: UHCI Host Controller [ 22.508111] usb usb3: Manufacturer: Linux 2.6.38-rc8+ uhci_hcd [ 22.514004] usb usb3: SerialNumber: 0000:00:1a.0 [ 22.518935] usb usb3: usb_probe_device [ 22.522674] usb usb3: configuration #1 chosen from 1 choice [ 22.528335] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 22.534300] hub 3-0:1.0: usb_probe_interface [ 22.538559] hub 3-0:1.0: usb_probe_interface - got id [ 22.543672] hub 3-0:1.0: USB hub found [ 22.547509] hub 3-0:1.0: 2 ports detected [ 22.551559] hub 3-0:1.0: standalone hub [ 22.555458] hub 3-0:1.0: no power switching (usb 1.0) [ 22.560572] hub 3-0:1.0: individual port over-current protection [ 22.566639] hub 3-0:1.0: power on to power good time: 2ms [ 22.572121] hub 3-0:1.0: local power source is good [ 22.577040] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 22.584030] h(XEN) IOAPIC[0]: Set PCI routing entry (0-18 -> 0xc8 -> IRQ 18 Mode:1 Active:1) ub 2-0:1.0: state 7 ports 6 chg 001c evt 0000 [ 22.584060] drivers/usb/core/inode.c: creating file '001' [ 22.584171] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 22.584225] xen: registering gsi 18 triggering 0 polarity 1 [ 22.584239] xen: --> pirq=18 -> irq=18 [ 22.592397] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 22.592413] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 22.592420] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 22.592431] drivers/usb/core/inode.c: creating file '004' [ 22.592638] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 22.648843] hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 22.657099] uuhci_hcd 0000:00:1a.1: Performing full reset [ 22.674170] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec20 [ 22.680019] usb usb4: default language 0x0409 [ 22.684437] usb usb4: udev 1, busnum 4, minor = 384 [ 22.689305] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 22.696151] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 22.703431] usb usb4: Product: UHCI Host Controller [ 22.706261] ehci_hcd 0000:00:1d.7: port 2 full speed --> companion [ 22.706269] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 22.706278] hub 2-0:1.0: port 2 not reset yet, waiting 50ms [ 22.729260] usb usb4: Manufacturer: Linux 2.6.38-rc8+ uhci_hcd [ 22.735152] usb usb4: SerialNumber: 0000:00:1a.1 [ 22.740097] usb usb4: usb_probe_device [ 22.743839] usb usb4: configuration #1 chosen from 1 choice [ 22.749494] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 22.755477] hub 4-0:1.0: usb_probe_interface [ ] hub 2-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 22.774899] hub 4-0:1.0: usb_probe_interface - got id [ 22.780013] hub 4-0:1.0: USB hub found [ 22.783849] hub 4-0:1.0: 2 ports detected [ 22.787900] hub 4-0:1.0: standalone hub [ 22.791800] hub 4-0:1.0: no power switching (usb 1.0) [ 22.796913] hub 4-0:1.0: individual port over-current protection [ 22.802980] hub 4-0:1.0: power on to power good time: 2ms [ 22.808384] ehci_hcd 0000:00:1d.7: port 3 high speed [ 22.808391] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 22.822454] hub 4-0:1.0: local power source is good [ 22.827335] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 22.834326] drivers/usb/core/inode.c: creating file '001' [ 22.839823] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1 [ 22.845860] xen: registering gsi 21 triggering 0 polarity 1 [ 22.851448] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 22.856906] xen: --> pirq=21 -> irq=21 [ 22.859092] usb 2-3: new high speed0:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 22.878674] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 22.884561] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 22.889848] drivers/usb/core/inode.c: creating file '005' [ 22.895539] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 22.907092] uhci_hcd 0000:00:1d.0: detected 2 ports [ 22.910384] ehci_hcd 0000:00:1d.7: port 3 high speed [ 22.910395] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 22.925927] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 22.932665] uhci_hcd 0000:00:1d.0: Performing full reset [ 22.938139] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec40 [ 22.944049] usb usb5: default language 0x0409 [ 22.948418] usb usb5: udev 1, busnum 5, minor = 512 [ 22.953328] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 22.960175] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 22.967455] usb usb5: Product: UHCI Host Controller [ 22.972394] usb usb5: Manufacturer: Linux 2.6.38-rc8+ uhci_hcd [ 22.977173] usb 2-3: default language 0x0409 [ 22.980172] usb 2-3: udev 3, busnum 2, minor = 130 [ 22.980177] usb 2-3: New USB device found, idVendor=046b, idProduct=ff90 [ 22.980181] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 22.980185] usb 2-3: Product: Composite Device [ 22.980189] usb 2-3: Manufacturer: American Megatrends Inc. [ 22.980196] usb 2-3: SerialNumber: serial [ 22.980447] usb 2-3: usb_probe_device [ 22.980452] usb 2-3: configuration #1 chosen from 1 choice [ 22.981436] usb 2-3: adding 2-3:1.0 (config #1, interface 0) [ 22.982384] usb 2-3: adding 2-3:1.1 (config #1, interface 1) [ 22.983371] usb 2-3: adding 2-3:1.2 (config #1, interface 2) [ 22.984375] drivers/usb/core/inode.c: creating file '003' [ 22.984428] hub 2-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 22.984443] ehci_hcd 0000:00:1d.7: port 4 low speed --> companion [ 23.035099] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 23.035146] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 23.035152] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0010 [ 23.035163] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 23.085499] usb usb5: SerialNumber: 0000:00:1d.0 [ 23.090471] usb usb5: usb_probe_device [ 23.094211] usb usb5: configuration #1 chosen from 1 choice [ 23.099873] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 23.105843] hub 5-0:1.0: usb_probe_interface [ 23.110096] hub 5-0:1.0: usb_probe_interface - got id [ 23.115210] hub 5-0:1.0: USB hub found [ 23.119049] hub 5-0:1.0: 2 ports detected [ 23.123098] hub 5-0:1.0: standalone hub [ 23.126997] hub 5-0:1.0: no power switching (usb 1.0) [ 23.132110] hub 5-0:1.0: individual port over-current protection [ 23.138178] hub 5-0:1.0: power on to power good time: 2ms [ 23.143665] hub 5-0:1.0: local power source is good [ 23.148578] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 23.155573] drivers/usb/core/inode.c: creating file '001' [ 23.161104] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 23.167126] xen: registering gsi 20 triggering 0 polarity 1 [ 23.172750] xen: --> pirq=20 -> irq=20 (XEN) IOAPIC[0]: Set PCI routing entry (0-20 -> 0xd0 -> IRQ 20 Mode:1 Active:1) [ 23.183575] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 23.190780] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 23.196652] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 23.201937] drivers/usb/core/inode.c: creating file '006' [ 23.207631] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 23.219094] uhci_hcd 0000:00:1d.1: detected 2 ports [ 23.223977] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 23.230716] uhci_hcd 0000:00:1d.1: Performing full reset [ 23.236170] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ec60 [ 23.242019] usb usb6: default language 0x0409 [ 23.246395] usb usb6: udev 1, busnum 6, minor = 640 [ 23.251300] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 23.258149] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 23.265427] usb usb6: Product: UHCI Host Controller [ 23.270367] usb usb6: Manufacturer: Linux 2.6.38-rc8+ uhci_hcd [ 23.276261] usb usb6: SerialNumber: 0000:00:1d.1 [ 23.281020] uhci_hcd 0000:00:1d.0: port 2 portsc 009b,00 [ 23.286336] hub 5-0:1.0: port 2: status 0101 change 0003 [ 23.286547] usb usb6: usb_probe_device [ 23.286553] usb usb6: configuration #1 chosen from 1 choice [ 23.286569] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 23.286749] hub 6-0:1.0: usb_probe_interface [ 23.286753] hub 6-0:1.0: usb_probe_interface - got id [ 23.286757] hub 6-0:1.0: USB hub found [ 23.286769] hub 6-0:1.0: 2 ports detected [ 23.286773] hub 6-0:1.0: stand286779] hub 6-0:1.0: individual port over-current protection [ 23.286783] hub 6-0:1.0: power on to power good time: 2ms [ 23.286797] hub 6-0:1.0: local power source is good [ 23.286801] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 23.286850] drivers/usb/core/inode.c: creating file '001' [ 23.286961] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 23.287003] xen: registering gsi 21 triggering 0 polarity 1 [ 23.287011] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 23.287014] xen: --> pirq=21 -> irq=21 [ 23.287019] Already setup the GSI :21 [ 23.287024] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 23.287040] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 23.287047] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 23.287081] drivers/usb/core/inode.c: creating file '007' [ 23.287296] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 23.386101] uhci_hcd 0000:00:1d.1: port 1 portsc 0082,00 [ 23.386128] uhci_hcd 0000:00:1d.1: port 2 portsc 01ab,00 [ 23.386136] hub 6-0:1.0: port 2: status 0301 change 0003 [ 23.439094] uhci_hcd 0000:00:1d.2: detected 2 ports [ 23.443984] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 23.450721] uhci_hcd 0000:00:1d.2: Performing full reset [ 23.456139] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000ec80 [ 23.462022] usb usb7: default language 0x0409 [ 23.466395] usb usb7: udev 1, busnum 7, minor = 768 [ 23.471307] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 23.478152] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 23.485433] usb usb7: Product: UHCI Host Controller [ 23.490373] usb usb7: Manufacturer: Linux 2.6.38-rc8+ uhci_hcd [ 23.496267] usb usb7: SerialNumber: 0000:00:1d.2 [ 23.500985] hub 6-0:1.0: state 7 ports 2 chg 0004 evt 0000 [ 23.506534] hub 6-0:1.0: port 2, status 0301, change 0000, 1.5 Mb/s [ 23.507352] usb usb7: usb_probe_device [ 23.507357] usb usb7: configuration #1 chosen from 1 choice [ 23.507374] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 23.507544] hub 7-0:1.0: usb_probe_interface [ 23.507549] hub 7-0:1.0: usb_probe_interface - got id [ 23.507552] hub 7-0:1.0: USB hub found [ 23.507566] hub 7-0:1.0: 2 ports detected [ 23.507569] hub 7-0:1.0: standalone hub [ 23.507573] hub 7-0:1.0: no power switching (usb 1.0) [ 23.507576] hub 7-0:1.0: individual port over-current protection [ 23.507580] hub 7-0:1.0: power on to power good time: 2ms [ 23.507594] hub 7-0:1.0: local power source is good [ 23.507598] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 23.507646] drivers/usb/core/inode.c: creating file '001' [ 23.507765] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 23.507958] initcall uhci_hcd_init+0x0/0x10a returned 0 after 1266311 usecs [ 23.507963] calling usblp_init+0x0/0x1b @ 1 [ 23.508151] usbcore: registered new interface driver usblp [ 23.508158] initcall usblp_init+0x0/0x1b returned 0 after 184 usecs [ 23.508163] calling usb_stor_init+0x0/0x50 @ 1 [ 23.508166] Initializing USB Mass Storage driver... [ 23.508210] usb-storage 2-3:1.0: usb_probe_interface [ 23.508218] usb-storage 2-3:1.0: usb_probe_interface - got id [ 23.509357] scsi0 : usb-storage 2-3:1.0 [ 23.509828] usb-storage 2-3:1.1: usb_probe_interface [ 23.509837] usb-storage 2-3:1.1: usb_probe_interface - got id [ 23.510001] scsi1 : usb-storage 2-3:1.1 [ 23.510478] usb-storage 2-3:1.2: usb_probe_interface [ 23.510487] usb-storage 2-3:1.2: usb_probe_interface - got id [ 23.510654] scsi2 : usb-storage 2-3:1.2 [ 23.511238] usbcore: registered new interface driver usb-storage [ 23.511242] USB Mass Storage support registered. [ 23.511250] initcall usb_stor_init+0x0/0x50 returned 0 after 3007 usecs [ 23.511255] calling usb_usual_init+0x0/0x3e @ 1 [ 23.511446] usbcore: registered new interface driver libusual [ 23.511453] initcall usb_usual_init+0x0/0x3e returned 0 after 187 usecs [ 23.511458] calling i8042_init+0x0/0x3f1 @ 1 [ 23.511998] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 23.512907] i8042: No controller found [ 23.512914] initcall i8042_init+0x0/0x3f1 returned -19 after 1415 usecs [ 23.512919] calling serport_init+0x0/0x34 @ 1 [ 23.512925] initcall serport_init+0x0/0x34 returned 0 after 1 usecs [ 23.512929] calling mousedev_init+0x0/0x61 @ 1 [ 23.513137] mousedev: PS/2 mouse device common for all mice [ 23.513145] initcall mousedev_init+0x0/0x61 returned 0 after 204 usecs [ 23.513150] calling evdev_init+0x0/0x12 @ 1 [ 23.513329] initcall evdev_init+0x0/0x12 returned 0 after 168 usecs [ 23.513335] calling atkbd_init+0x0/0x27 @ 1 [ 23.513485] initcall atkbd_init+0x0/0x27 returned 0 after 140 usecs [ 23.513491] calling psmouse_init+0x0/0x7b @ 1 [ 23.513745] initcall psmouse_init+0x0/0x7b returned 0 after 242 usecs [ 23.513751] calling cmos_init+0x0/0x6d @ 1 [ 23.513814] rtc_cmos 00:04: RTC can wake from S4 [ 23.797303] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 23.803447] rtc0: alarms up to one day, y3k, 242 bytes nvram [ 23.809284] initcall cmos_init+0x0/0x6d returned 0 after 288598 usecs [ 23.810109] usb usb3: suspend_rh (auto-stop) [ 23.820039] calling i2c_i801_init+0x0/0x1b @ 1 [ 23.824937] initcall i2c_i801_init+0x0/0x1b returned 0 after 295 usecs [ 23.831445] calling dm_init+0x0/0x49 @ 1 [ 23.836185] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@xxxxxxxxxx [ 23.844603] initcall dm_init+0x0/0x49 returned 0 after 8869 usecs [ 23.850756] calling dm_mirror_init+0x0/0x79 @ 1 [ 23.855658] initcall dm_mirror_init+0x0/0x79 returned 0 after 215 usecs [ 23.862256] calling dm_dirty_log_init+0x0/0x59 @ 1 [ 23.867198] initcall dm_dirty_log_init+0x0/0x59 returned 0 after 1 usecs [ 23.873956] calling dm_zero_init+0x0/0x31 @ 1 [ 23.878464] initcall dm_zero_init+0x0/0x31 returned 0 after 0 usecs [ 23.884790] calling cpufreq_gov_dbs_init+0x0/0xb2 @ 1 [ 23.890112] initcall cpufreq_gov_dbs_init+0x0/0xb2 returned 0 after 116 usecs [ 23.893109] usb 6-2: new low speed USB device using uhci_hcd and address 2 [ 23.904171] calling init_ladder+0x0/0x12 @ 1 [ 23.908589] cpuidle: using governor ladder [ 23.912750] initcall init_ladder+0x0/0x12 returned 0 after 4063 usecs [ 23.919250] calling init_menu+0x0/0x12 @ 1 [ 23.923495] cpuidle: using governor menu [ 23.927484] initcall init_menu+0x0/0x12 returned 0 after 3893 usecs [ 23.933810] calling efivars_init+0x0/0x1d6 @ 1 [ 23.938405] initcall efivars_init+0x0/0x1d6 returned -19 after 0 usecs [ 23.945009] calling hid_init+0x0/0x66 @ 1 [ 23.949504] initcall hid_init+0x0/0x66 returned 0 after 325 usecs [ 23.955582] calling a4_init+0x0/0x1b @ 1 [ 23.959811] initcall a4_init+0x0/0x1b returned 0 after 149 usecs [ 23.965800] calling apple_init+0x0/0x39 @ 1 [ 23.970291] initcall apple_init+0x0/0x39 returned 0 after 152 usecs [ 23.976539] calling belkin_init+0x0/0x1b @ 1 [ 23.981131] initcall belkin_init+0x0/0x1b returned 0 after 166 usecs [ 23.987468] calling ch_init+0x0/0x1b @ 1 [ 23.991700] initcall ch_init+0x0/0x1b returned 0 after 152 usecs [ 23.997695] calling ch_init+0x0/0x1b @ 1 [ 24.001951] initcall ch_init+0x0/0x1b returned 0 after 175 usecs [ 24.007939] calling cp_init+0x0/0x1b @ 1 [ 24.012199] initcall cp_init+0x0/0x1b returned 0 after 180 usecs [ 24.018192] calling dr_init+0x0/0x1b @ 1 [ 24.022430] initcall dr_init+0x0/0x1b returned 0 after 157 usecs [ 24.028419] calling ez_init+0x0/0x1b @ 1 [ 24.032651] initcall ez_init+0x0/0x1b returned 0 after 152 usecs [ 24.038043] usb 6-2: skipped 1 descriptor after interface [ 24.038049] usb 6-2: skipped 1 descriptor after interface [ 24.043031] usb 6-2: default language 0x0409 [ 24.053892] calling gyration_init+0x0/0x1b @ 1 [ 24.058035] usb 6-2: udev 2, busnum 6, minor = 641 [ 24.058039] usb 6-2: New USB device found, idVendor=0624, idProduct=de11 [ 24.058043] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 24.058047] usb 6-2: Product: Avocent KVM [ 24.058053] usb 6-2: Manufacturer: Avocent adding 6-2:1.0 (config #1, interface 0)e [ 24.078253] usb 6-2: adding 6-2:1.1 (config #1, interface 1) [ 24.086252] drivers/usb/core/inode.c: creating file '002' [ 24.086299] hub 5-0:1.0: state 7 ports 2 chg 0004 evt 0000 [ 24.086327] hub 5-0:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 24.127974] initcall gyration_init+0x0/0x1b returned 0 after 145 usecs [ 24.134487] calling ks_init+0x0/0x1b @ 1 [ 24.138721] initcall ks_init+0x0/0x1b returned 0 after 155 usecs [ 24.144714] calling kye_init+0x0/0x1b @ 1 [ 24.149029] initcall kye_init+0x0/0x1b returned 0 after 149 usecs [ 24.155107] calling lg_init+0x0/0x1b @ 1 [ 24.159334] initcall lg_init+0x0/0x1b returned 0 after 149 usecs [ 24.165325] calling ms_init+0x0/0x1b @ 1 [ 24.169572] initcall ms_init+0x0/0x1b returned 0 after 167 usecs [ 24.175560] calling mr_init+0x0/0x1b @ 1 [ 24.179790] initcall mr_init+0x0/0x1b returned 0 after 150 usecs [ 24.185778] calling ntrig_init+0x0/0x1b @ 1 [ 24.188093] usb 5-2: new full speed USB device usinb @ 1 [ 24.207792] initcall pl_init+0x0/0x1b returned 0 after 167 usecs [ 24.213781] calling pl_init+0x0/0x1b @ 1 [ 24.218011] initcall pl_init+0x0/0x1b returned 0 after 150 usecs [ 24.224000] calling samsung_init+0x0/0x1b @ 1 [ 24.228665] initcall samsung_init+0x0/0x1b returned 0 after 153 usecs [ 24.235085] calling sjoy_init+0x0/0x1b @ 1 [ 24.239488] initcall sjoy_init+0x0/0x1b returned 0 after 151 usecs [ 24.245651] calling sony_init+0x0/0x1b @ 1 [ 24.250055] initcall sony_init+0x0/0x1b returned 0 after 151 usecs [ 24.256216] calling sp_init+0x0/0x1b @ 1 [ 24.260444] initcall sp_init+0x0/0x1b returned 0 after 149 usecs [ 24.266434] calling ga_init+0x0/0x1b @ 1 [ 24.270662] initcall ga_init+0x0/0x1b returned 0 after 149 usecs [ 24.276653] calling tm_init+0x0/0x1b @ 1 [ 24.280882] initcall tm_init+0x0/0x1b returned 0 after 150 usecs [ 24.286870] calling ts_init+0x0/0x1b @ 1 [ 24.291114] initcall ts_init+0x0/0x1b returned 0 after 164 usecs [ 24.297107] calling twinhan_init+0x0/0x1b @ 1 [ 24.301770] initcall twinhan_init+0x0/0x1b returned 0 after 151 usecs [ 24.308192] calling zp_init+0x0/0x1b @ 1 [ 24.312442] initcall zp_init+0x0/0x1b returned 0 after 170 usecs [ 24.318437] calling hid_init+0x0/0x78 @ 1 [ 24.321065] usb 5-2: skipped 1 descriptor after interface [ 24.321070] usb 5-2: skipped 1 descriptor after interface [ 24.325061] usb 5-2: default language 0x0409 [ 24.338076] usbhid 6-2:1.0: usb_probe_interface[ 24.397061] usb 5-2: adding 5-2:1.0 (config #1, interface 0) [ 24.405542] usb 5-2: adding 5-2:1.1 (config #1, interface 1) [ 24.413281] drivers/usb/core/inode.c: creating file '002' [ 24.418792] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 24.418980] input: Avocent Avocent KVM as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input1 [ 24.419008] uhci_hcd 0000:00:1d.1: reserve dev 2 ep81-INT, period 8, phase 4, 118 us [ 24.419381] generic-usb 0003:0624:DE11.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent Avocent KVM] on usb-0000:00:1d.1-2/input0 [ 24.419399] usbhid 6-2:1.1: usb_probe_interface [ 24.419403] usbhid 6-2:1.1: usb_probe_interface - got id [ 24.480613] input: Avocent Avocent KVM as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input2 [ 24.490086] uhci_hcd 0000:00:1d.1: reserve dev 2 ep82-INT, period 8, phase 4, 99 us [ 24.498394] generic-usb 0003:0624:DE11.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent Avocent KVM] on usb-0000:00:1d.1-2/input1 [ 14701] usbhid 5-2[ 24.552861] scsi 0:0:0:0: Direct-Access iDRAC LCDRIVE tual CDROM 1.0sb7: suspend_rh (auto-stop) [ 24.574115] scsi 2:0:0:0: Direct-Access iDRAC Virtual Floppy 1.00 PQ: 0 ANSI: 0 CCS [ 24.574720] calling 2_sd_probe_async+0x0/0x1ce @ 5 [ 24.575097] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 24.593589] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input3 [ 24.597354] calling 3_sd_probe_async+0x0/0x1ce @ 30 [ 24.597827] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 24.616330] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 17 us [ 24.624446] generic-usb 0003:046B:FF10.0003: input,hidraw2: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.0-2/inpu0 [ 24.636147] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 24.636155] initcall 2_sd_probe_async+0x0/0x1ce returned 0 after 59988 usecs [ 24.651861] usbhid 5-2:1.1: usb_probe_interface [ 24.656443] usbhid 5-2:1.1: usb_probe_interface - got id [ 24.666613] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input4 [ 24.679647] generic-usb 0003:046B:FF10.0004: input,hidraw3: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.0-2/input1 [ 24.694309] usbcore: registered new interface driver usbhid [ 24.699921] usbhid: USB HID core driver [ 24.703780] initcall hid_init+0x0/0x78 returned 0 after 357350 usecs [ 24.710188] calling eeepc_laptop_init+0x0/0x5b @ 1 [ 24.716150] initcall eeepc_laptop_init+0x0/0x5b returned -19 after 992 usecs [ 24.723190] calling flow_cache_init_global+0x0/0x122 @ 1 [ 24.728747] sr0: scsi-1 drive [ 24.728799] initcall flow_cache_init_global+0x0/0x122 returned 0 after 142 usecs [ 24.728804] calling llc_init+0x0/0x20 @ 1 [ 24.728810] initcall llc_init+0x0/0x20 returned 0 after 2 usecs [ 24.728815] calling snap_init+0x0/0x38 @ 1 [ 24.728821] initcall snap_init+0x0/0x38 returned 0 after 2 usecs [ 24.728825] calling rif_init+0x0/0x84 @ 1 [ 24.728869] initcall rif_init+0x0/0x84 returned 0 after 38 usecs [ 24.728874] calling blackhole_module_init+0x0/0x12 @ 1 [ 24.728879] initcall blackhole_module_init+0x0/0x12 returned 0 after 1 usecs [ 24.728886] calling nfnetlink_init+0x0/0x27 @ 1 [ 24.728889] Netfilter messages via NETLINK v0.30. [ 24.728952] initcall nfnetlink_init+0x0/0x27 returned 0 after 59 usecs [ 24.728957] calling nfnetlink_log_init+0x0/0xd5 @ 1 [ 24.728977] initcall nfnetlink_log_init+0x0/0xd5 returned 0 after 14 usecs [ 24.728981] calling nf_conntrack_standalone_init+0x0/0x12 @ 1 [ 24.728986] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 24.729600] initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after 596 usecs [ 24.729605] calling ctnetlink_init+0x0/0xd5 @ 1 [ 24.729609] ctnetlink v0.93: registering with nfnetlink. [ 24.729614] initcall ctnetlink_init+0x0/0xd5 returned 0 after 4 usecs [ 24.729619] calling nf_conntrack_ftp_init+0x0/0x1b1 @ 1 [ 24.729628] initcall nf_conntrack_ftp_init+0x0/0x1b1 returned 0 after 2 usecs [ 24.729633] calling nf_conntrack_irc_init+0x0/0x17c @ 1 [ 24.729640] initcall nf_conntrack_irc_init+0x0/0x17c returned 0 after 2 usecs [ 24.729644] calling xt_init+0x0/0x12a @ 1 [ 24.729651] initcall xt_init+0x0/0x12a returned 0 after 2 usecs [ 24.729655] calling tcpudp_mt_init+0x0/0x17 @ 1 [ 24.729661] initcall tcpudp_mt_init+0x0/0x17 returned 0 after 1 usecs [ 24.729665] calling mark_mt_init+0x0/0x43 @ 1 [ 24.729670] initcall mark_mt_init+0x0/0x43 returned 0 after 0 usecs [ 24.729674] calling connsecmark_tg_init+0x0/0x12 @ 1 [ 24.729679] initcall connsecmark_tg_init+0x0/0x12 returned 0 after 0 usecs [ 24.729684] calling secmark_tg_init+0x0/0x12 @ 1 [ 24.729688] initcall secmark_tg_init+0x0/0x12 returned 0 after 0 usecs [ 24.729692] calling tcpmss_tg_init+0x0/0x17 @ 1 [ 24.729697] initcall tcpmss_tg_init+0x0/0x17 returned 0 after 0 usecs [ 24.729702] calling conntrack_mt_init+0x0/0x17 @ 1 [ 24.729709] initcall conntrack_mt_init+0x0/0x17 returned 0 after 0 usecs [ 24.729713] calling policy_mt_init+0x0/0x17 @ 1 [ 24.729718] initcall policy_mt_init+0x0/0x17 returned 0 after 0 usecs [ 24.729722] calling state_mt_init+0x0/0x12 @ 1 [ 24.729726] initcall state_mt_init+0x0/0x12 returned 0 after 0 usecs [ 24.729731] calling sysctl_ipv4_init+0x0/0x8f @ 1 [ 24.730272] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 24.730282] initcall 3_sd_probe_async+0x0/0x1ce returned 0 after 129801 usecs [ 24.731277] initcall sysctl_ipv4_init+0x0/0x8f returned 0 after 1504 usecs [ 24.731282] calling init_syncookies+0x0/0x19 @ 1 [ 24.731329] initcall init_syncookies+0x0/0x19 returned 0 after 40 usecs [ 24.731333] calling tunnel4_init+0x0/0x68 @ 1 [ 24.731338] initcall tunnel4_init+0x0/0x68 returned 0 after 0 usecs [ 24.731345] calling ipv4_netfilter_init+0x0/0x12 @ 1 [ 24.731350] initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 0 usecs [ 24.731357] calling nf_conntrack_l3proto_ipv4_init+0x0/0x14b @ 1 [ 24.732203] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x14b returned 0 after 819 usecs [ 24.732208] calling nf_nat_init+0x0/0x117 @ 1 [ 24.732248] initcall nf_nat_init+0x0/0x117 returned 0 after 34 usecs [ 24.732253] calling nf_defrag_init+0x0/0x17 @ 1 [ 24.732258] initcall nf_defrag_init+0x0/0x17 returned 0 after 0 usecs [ 24.732262] calling nf_nat_ftp_init+0x0/0x21 @ 1 [ 24.732267] initcall nf_nat_ftp_init+0x0/0x21 returned 0 after 0 usecs [ 24.732271] calling nf_nat_irc_init+0x0/0x21 @ 1 [ 24.732276] initcall nf_nat_irc_init+0x0/0x21 returned 0 after 0 usecs [ 24.732280] calling ip_tables_init+0x0/0xa5 @ 1 [ 24.732297] ip_tables: (C) 2000-2006 Netfilter Core Team [ 24.732302] initcall ip_tables_init+0x0/0xa5 returned 0 after 16 usecs [ 24.732309] calling iptable_filter_init+0x0/0x6f @ 1 [ 24.732340] initcall iptable_filter_init+0x0/0x6f returned 0 after 25 usecs [ 24.732345] calling iptable_mangle_init+0x0/0x51 @ 1 [ 24.732366] initcall iptable_mangle_init+0x0/0x51 returned 0 after 15 usecs [ 24.732371] calling nf_nat_standalone_init+0x0/0x82 @ 1 [ 24.732391] initcall nf_nat_standalone_init+0x0/0x82 returned 0 after 14 usecs [ 24.732399] calling iptable_raw_init+0x0/0x51 @ 1 [ 24.732417] initcall iptable_raw_init+0x0/0x51 returned 0 after 12 usecs [ 24.732422] calling log_tg_init+0x0/0x29 @ 1 [ 24.732426] initcall log_tg_init+0x0/0x29 returned 0 after 0 usecs [ 24.732431] calling masquerade_tg_init+0x0/0x39 @ 1 [ 24.732439] initcall masquerade_tg_init+0x0/0x39 returned 0 after 2 usecs [ 24.732443] calling reject_tg_init+0x0/0x12 @ 1 [ 24.732448] initcall reject_tg_init+0x0/0x12 returned 0 after 0 usecs [ 24.732453] calling ulog_tg_init+0x0/0xcc @ 1 [ 24.732468] initcall ulog_tg_init+0x0/0xcc returned 0 after 10 usecs [ 24.732473] calling cubictcp_register+0x0/0x6e @ 1 [ 24.732477] TCP cubic registered [ 24.732484] initcall cubictcp_register+0x0/0x6e returned 0 after 4 usecs [ 24.732489] calling xfrm_user_init+0x0/0x4d @ 1 [ 24.732492] Initializing XFRM netlink socket [ 24.732503] initcall xfrm_user_init+0x0/0x4d returned 0 after 9 usecs [ 24.732508] calling inet6_init+0x0/0x29f @ 1 [ 24.733296] NET: Registered protocol family 10 [ 24.736535] initcall inet6_init+0x0/0x29f returned 0 after 3925 usecs [ 24.736540] calling ah6_init+0x0/0x68 @ 1 [ 24.736546] initcall ah6_init+0x0/0x68 returned 0 after 0 usecs [ 24.736550] calling esp6_init+0x0/0x68 @ 1 [ 24.736558] initcall esp6_init+0x0/0x68 returned 0 after 0 usecs [ 24.736563] calling xfrm6_transport_init+0x0/0x17 @ 1 [ 24.736568] initcall xfrm6_transport_init+0x0/0x17 returned 0 after 0 usecs [ 24.736573] cnf_defrag_init+0x0/0x54 @ 1 [ 24.736844] initcall nf_defrag_init+0x0/0x54 returned 0 after 96 usecs [ 24.736849] calling ipv6header_mt6_init+0x0/0x12 @ 1 [ 24.736855] initcall ipv6header_mt6_init+0x0/0x12 returned 0 after 0 usecs [ 24.7368ugfs_init+0x0/0x3b returned 0 after 6 usecs [ 24.739962] calling acpi_cpufreq_init+0x0/0xe4 @ 1 [ 24.740084] initcall acpi_cpufreq_init+0x0/0xe4 returned -19 after 113 usecs [ 24.740089] calling hpet_insert_resource+0x0/0x23 @ 1 [ 24.7400itcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs [ 24.740133] calling check_early_ioremap_leak+0x0/0x65 @ 1 [ 24.740138] initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs [ 24.740143] calling pat_memtype_list_in+0x0/0x51 returned 0 after 1 usecs [ 24.740186] calling pm_qos_power_init+0x0/0x61 @ 1 [ 24.740732] initcall pm_qos_power_init+0x0/0x61 returned 0 after 525 usecs [ 24.740740] calling software_resume+0x0/0x1ec @ 1 [ 24.740744] PM: Hibernax0/0x1ec returned -2 after 3 usecs [ 24.740755] initcall software_resume+0x0/0x1ec returned with error code -2 [ 24.740763] calling debugfs_kprobe_init+0x0/0x89 @ 1 lear_boot_tracer+0x0/0x2d @ 1fs_kprobe_init+0x0/0x89 returned 0 after 23 usecs [ 24.740825] initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs [ 24.740831] calling max_swapfiles_check+0x0/0x8 @ 1 [ 24.740836] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs [ 24.74ate_resume_init+0x0/0xf1 returned 0 after 93 usecs [ 24.742144] calling scsi_complete_async_scans+0x0/0x123 @ 1 [ 24.742149] initcall scsi_complete_async_scans+0x0/0x123 returned 0 after 0 usecs tcp_congestion_default+0x0/0x12 returned 0 after 1 usecs [ 24.742257] calling ip_auto_config+0x0/0xed1 @ 1 [ 24.742268] initcall ip_auto_config+0x0/0xed1 returned 0 after 6 usecs [ 24.742272] calling initialize_hashrnd+0x0/0x19 @ 1 [ 24.742286] initcall initialize_hashrnd+0x0/0x19 returned 0 after 6 usecs [ 25.808847] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 25.809300] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 25.809706] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 25.824365] async_waiting @ 1 [ 25.827323] async_continuing @ 1 after 0 usec [ 25.832511] Freeing unused kernel memory: 532k freed [ 25.837671] Write protecting the kernel read-only data: 10240k [ 25.855232] Freeing unused kernel memory: 768k frCreating initial device nodes Setting up hotplug. [ 25.958646] nash-hotplug (1150): /proc/1150/oom_adj is deprecated, please use /proc/1150/oom_score_adj instead. Creating block device nodes. Loading megaraid_sas.ko module [ 26.251329] calling megasas_init+0x0/0x1e0 [megaraid_sas] @ 1151 [ 26.257410] megasas: 00.00.05.29-rc1 Tue. Dec. 7 17:00:00 PDT 2010 [ 26.263699] megasas: 0x1000:0x0060:0x1028:0x1f0d: bus 2:slot 0:func 0 [ 26.270166] xen: registering gsi 16 triggering 0 polarity 1 [ 26.275789] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 26.281244] xen: --> pirq=16 -> irq=16 [ 26.285080] Already setup the GSI :16 [ 26.288786] megaraid_sas 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 26.296334] megaraid_sas 0000:02:00.0: setting latency timer to 64 [ 26.302806] megasas: FW now in Ready state [ 26.353082] megasas_init_mfi: fw_support_ieee=0 [ 26.357339] megasas: INIT adapter done [ 26.424258] scsi3 : LSI SAS based MegaRAID driver [ 26.432296] scsi 3:0:0:0: Direct-Access ATA ST9500530NS DA03 PQ: 0 ANSI: 5 [ 26.443034] scsi 3:0:1:0: Direct-Access ATA ST9500530NS DA03 PQ: 0 ANSI: 5 [ 26.511318] scsi 3:0:32:0: Enclosure DP BACKPLANE 1.07 PQ: 0 ANSI: 5 [ 26.519710] scsi 3:0:32:0: Attached scsi generic sg3 type 13 [ 26.554809] scsi 3:2:0:0: Direct-Access DELL PERC 6/i 1.22 PQ: 0 ANSI: 5 [ 26.563263] sd 3:2:0:0: [sdc] 975699968 512-byte logical blocks: (499 GB/465 GiB) [ 26.563271] sd 3:2:0:0: Attached scsi generic sg4 type 0 [ 26.580403] sd 3:2:0:0: [sdc] Write Protect is off [ 26.585180] sd 3:2:0:0: [sdc] Mode Sense: 1f 00 10 08 [ 26.590532] sd 3:2:0:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 26.592978] initcall megasas_init+0x0/0x1e0 [megaraid_sas] returned 0 after 327693 usecs [ 26.608267] sdc: sdc1 sdc2 [ 26.611735] sd 3:2:0:0: [sdc] Attached SCSI disk Scanning and configuring dmraid supported devices Scanning logical volumes Reading all physical volumes. This may take a while... Found volume group "VolGroup00" using metadata type lvm2 Activating logical volumes 2 logical volume(s) in volume group "VolGroup00" now active Trying to resume from /dev/VolGroup00/LogVol01 No suspend signature on swap, not resuming. Creating root device. Mounting root filesystem. [ 27.186312] EXT3-fs: barriers not enabled [ 27.195047] kSetting up other filesystems.journald startin g. Commit interSetting up new root fsval 5 seconds [ 27.195124] EXT3-fs (dm-0): mounted filesystem with writeback data mode no fstab.sys, mounting internal defaults Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys INIT: version 2.86 booting Welcome to CentOS release 5.5 (Final) Press 'I' to enter interactive startup. Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. Setting clock (utc): Fri Mar 18 09:55:38 BRT 2011 [ OK ] Starting udev: (XEN) IOAPIC[1]: Set PCI routing entry (1-4 -> 0xd8 -> IRQ 36 Mode:1 Active:1) (XEN) IOAPIC[1]: Set PCI routing entry (1-16 -> 0x21 -> IRQ 48 Mode:1 Active:1) (XEN) IOAPIC[1]: Set PCI routing entry (1-6 -> 0x29 -> IRQ 38 Mode:1 Active:1) (XEN) IOAPIC[1]: Set PCI routing entry (1-13 -> 0x31 -> IRQ 45 Mode:1 Active:1) udevd-event[1597]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/host0/ioerr_cnt' failed udevd-event[1601]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.2/host2/ioerr_cnt' failed udevd-event[1599]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.1/host1/ioerr_cnt' failed udevd-event[1822]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/host3/ioerr_cnt' failed udevd-event[3047]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/host0/target0:0:0/ioerr_cnt' failed udevd-event[3050]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.2/host2/target2:0:0/ioerr_cnt' failed udevd-event[3053]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.1/host1/target1:0:0/ioerr_cnt' failed udevd-event[3060]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/host3/target3:0:32/ioerr_cnt' failed udevd-event[3061]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/host3/target3:2:0/ioerr_cnt' failed [ OK ] Loading default keymap (us-acentos): [ OK ] Setting hostname r2b16ch1x4p1.cloudtecla.com.br: [ OK ] DM multipath kernel driver version too old Setting up Logical Volume Management: 2 logical volume(s) in volume group "VolGroup00" now active [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol00 /dev/VolGroup00/LogVol00: clean, 206726/15728640 files, 2100627/15728640 blocks [/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sdc1 /boot: clean, 65/32128 files, 77100/128488 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] rm: cannot remove `/var/run/xend/boot': Is a directory Enabling /etc/fstab swaps: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Applying Intel CPU microcode update: FATAL: Module microcode not found. ERROR: Module microcode does not exist in /proc/modules Starting monitoring for VG VolGroup00: 2 logical volume(s) in volume group "VolGroup00" monitored [ OK ] Starting sysstat: Calling the system activity data collector (sadc): [ OK ] Starting background readahead: [ OK ] Starting multipathd: Starting multipathd daemon: [ OK ] [ OK ] [ OK ] iSCSI daemon: [ OK ] [ OK ] Flushing firewall rules: [ OK ] Setting chains to policy ACCEPT: mangle filter [ OK ] Unloading ip6tables modules: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface bond0: udevd-event[3437]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:07.0/0000:03:00.1/host4/ioerr_cnt' failed udevd-event[3440]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1/host6/ioerr_cnt' failed udevd-event[3439]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:07.0/0000:03:00.0/host5/ioerr_cnt' failed udevd-event[3441]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/host7/ioerr_cnt' failed [ OK ] Bringing up interface bond1: [ OK ] Bringing up interface bond1.1321: Added VLAN with VID == 1321 to IF -:bond1:- [ OK ] Bringing up interface bond1.1322: Added VLAN with VID == 1322 to IF -:bond1:- [ OK ] Starting auditd: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] iscsid (pid 3459) is running... Setting up iSCSI targets: Logging in to [iface: default, target: iqn.1986-03.com.sun:02:8d376124-7768-4b73-a809-e9e7fe558eff, portal: 10.11.0.106,3260] [ 91.377228] ------------[ cut here ]------------ [ 91.381840] WARNING: at arch/x86/xen/mmu.c:57Logging in to [iface: default, target: iqn.1986-03.com.sun:02:8d376124-7768-4b73-a809-e9e7fe558eff, portal: 10.10.0.10d ebug+0xce/0xda() [ 91.400130] Hardware name: PowerEdge M610 [ 91.400135] 0x7839f000 is missing VM_IO (and wasn't fixed)! [ 91.400140] Modules linked in: 8021q garp stp bonding iscsi_tcp libiscsi_tcp bnx2i libiscsi scsi_transport_iscsi cnic uio dm_multipath bnx2 megaraid_sas [ 91.400174] Pid: 3459, comm: iscsid Tainted: G W 2.6.38-rc8+ #2 [ 91.400177] Call Trace: [ 91.400185] [] ? xen_make_pte_debug+0xce/0xda [ 91.400191] [] ? warn_slowpath_common+0x80/0x99 [ 91.400196] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 91.400205] [] ? xen_spin_unlock+0x11/0x31 [ 91.400212] [] ? vma_adjust+0x3ac/0x44a [ 91.400218] [] ? check_events+0x12/0x20 [ 91.400225] [] ? pvclock_clocksource_read+0x48/0xb9 [ 91.400231] [] ? get_phys_to_machine+0x26/0x61 [ 91.400237] [] ? xen_make_pte+0x83/0x8d [ 91.400242] [] ? xen_make_pte_debug+0xce/0xda [ 91.400248] [] ? __raw_callee_save_xen_make_pte_debug+0x11/0x1e [ 91.400253] [] ? xen_pmd_val+0x9/0xb [ 91.400259] [] ? mprotect_fixup+0x50f/0x6b9 [ 91.401527] [] ? sys_mprotect+0x193/0x20c [ 91.401534] [] ? system_call_fastpath+0x16/0x1b [ 91.401538] ---[ end trace 4eaa2a86a8e2da2e ]--- [ 91.401542] ------------[ cut here ]------------ [ 91.401546] WARNING: at arch/x86/xen/mmu.c:577 xen_make_pte_debug+0xce/0xda() [ 91.401549] Hardware name: PowerEdge M610 [ 91.401552] 0x783a0000 is missing VM_IO (and wasn't fixed)! [ 91.401555] Modules linked in: 8021q garp stp bonding iscsi_tcp libiscsi_tcp bnx2i libiscsi scsi_transport_iscsi cnic uio dm_multipath bnx2 megaraid_sas [ 91.401578] Pid: 3459, comm: iscsid Tainted: G W 2.6.38-rc8+ #2 [ 91.401581] Call Trace: [ 91.401587] [] ? xen_make_pte_debug+0xce/0xda [ 91.401592] [] ? warn_slowpath_common+0x80/0x99 [ 91.401597] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 91.401602] [] ? xen_spin_unlock+0x11/0x31 [ 91.401611] [] ? vma_adjust+0x3ac/0x44a [ 91.401616] [] ? check_events+0x12/0x20 [ 91.401622] [] ? pvclock_clocksource_read+0x48/0xb9 [ 91.401627] [] ? get_phys_to_machine+0x26/0x61 [ 91.401633] [] ? xen_make_pte+0x83/0x8d [ 91.401638] [] ? xen_make_pte_debug+0xce/0xda [ 91.401643] [] ? __raw_callee_save_xen_make_pte_debug+0x11/0x1e [ 91.401649] [] ? mprotect_fixup+0x50f/0x6b9 [ 91.401656] [] ? sys_mprotect+0x193/0x20c [ 91.401661] [] ? system_call_fastpath+0x16/0x1b [ 91.401665] ---[ end trace 4eaa2a86a8e2da2f ]--- [ 91.401668] ------------[ cut here ]------------ [ 91.401673] WARNING: at arch/x86/xen/mmu.c:577 xen_make_pte_debug+0xce/0xda() [ 91.401676] Hardware name: PowerEdge M610 [ 91.401678] 0x783b0000 is missing VM_IO (and wasn't fixed)! [ 91.401681] Modules linked in: 8021q garp stp bonding iscsi_tcp libiscsi_tcp bnx2i libiscsi scsi_transport_iscsi cnic uio dm_multipath bnx2 megaraid_sas [ 91.401706] Pid: 3459, comm: iscsid Tainted: G W 2.6.38-rc8+ #2 [ 91.401709] Call Trace: [ 91.401715] [] ? xen_make_pte_debug+0xce/0xda [ 91.401720] [] ? warn_slowpath_common+0x80/0x99 [ 91.401725] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 91.401730] [] ? xen_spin_unlock+0x11/0x31 [ 91.401736] [] ? vma_adjust+0x3ac/0x44a [ 91.401741] [] ? check_events+0x12/0x20 [ 91.401747] [] ? pvclock_clocksource_read+0x48/0xb9 [ 91.401752] [] ? get_phys_to_machine+0x26/0x61 [ 91.401758] [] ? xen_make_pte+0x83/0x8d [ 91.401763] [] ? xen_make_pte_debug+0xce/0xda [ 91.401769] [] ? __raw_callee_save_xen_make_pte_debug+0x11/0x1e [ 91.401774] [] ? mprotect_fixup+0x50f/0x6b9 [ 91.401783] [] ? sys_mprotect+0x193/0x20c [ 91.401789] [] ? system_call_fastpath+0x16/0x1b [ 91.401792] ---[ end trace 4eaa2a86a8e2da30 ]--- [ 91.401795] ------------[ cut here ]------------ [ 91.401800] WARNING: at arch/x86/xen/mmu.c:577 xen_make_pte_debug+0xce/0xda() [ 91.401803] Hardware name: PowerEdge M610 [ 91.401806] 0x783b1000 is missing VM_IO (and wasn't fixed)! [ 91.401808] Modules linked in: 8021q garp stp bonding iscsi_tcp libiscsi_tcp bnx2i libiscsi scsi_transport_iscsi cnic uio dm_multipath bnx2 megaraid_sas [ 91.401831] Pid: 3459, comm: iscsid Tainted: G W 2.6.38-rc8+ #2 [ 91.401834] Call Trace: [ 91.401839] [] ? xen_make_pte_debug+0xce/0xda [ 91.401844] [] ? warn_slowpath_common+0x80/0x99 [ 91.401850] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 91.401855] [] ? xen_spin_unlock+0x11/0x31 [ 91.401860] [] ? vma_adjust+0x3ac/0x44a [ 91.401868] [] ? check_events+0x12/0x20 [ 91.401874] [] ? pvclock_clocksource_read+0x48/0xb9 [ 91.401880] [] ? get_phys_to_machine+0x26/0x61 [ 91.401885] [] ? xen_make_pte+0x83/0x8d [ 91.401890] [] ? xen_make_pte_debug+0xce/0xda [ 91.401896] [] ? __raw_callee_save_xen_make_pte_debug+0x11/0x1e [ 91.401902] [] ? mprotect_fixup+0x50f/0x6b9 [ 91.401908] [] ? sys_mprotect+0x193/0x20c [ 91.401914] [] ? system_call_fastpath+0x16/0x1b [ 91.401917] ---[ end trace 4eaa2a86a8e2da31 ]--- [ 92.707157] scsi 8:0:0:0: Direct-Access SUN COMSTAR 1.0 PQ: 0 ANSI: 5 [ 92.717359] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 92.717789] scsi 9:0:0:0: Direct-Access SUN COMSTAR 1.0 PQ: 0 ANSI: 5 [ 92.720055] sd 8:0:0:0: [sdd] 10737418240 512-byte logical blocks: (5.49 TB/5.00 TiB) [ 92.720175] sd 9:0:0:0: [sde] 10737418240 512-byte logical blocks: (5.49 TB/5.00 TiB) [ 92.722246] sd 9:0:0:0: [sde] Write Protect is off [ 92.723638] sd 9:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 92.724094] sd 8:0:0:0: [sdd] Write Protect is off [ 92.725450] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 92.774770] sd 9:0:0:0: Attached scsi generic sg6 type 0 [ 92.782417] scsi 8:0:0:1: Direct-Access SUN COMSTAR 1.0 PQ: 0 ANSI: 5 [ 92.783532] scsi 9:0:0:1: Direct-Access SUN COMSTAR 1.0 PQ: 0 ANSI: 5 [ 92.784523] sd 9:0:0:1: Attached scsi generic sg7 type 0 [ 92.785791] sd 9:0:0:0: [sde] Attached SCSI disk [ 92.785812] sd 9:0:0:1: [sdf] 10737418240 512-byte logical blocks: (5.49 TB/5.00 TiB) [ 92.786593] scsi 9:0:0:2: Direct-Access SUN COMSTAR 1.0 PQ: 0 ANSI: 5 [ 92.786758] sd 8:0:0:0: [sdd] Attached SCSI disk [ 92.787357] sd 9:0:0:2: Attached scsi generic sg8 type 0 [ 92.787774] sd 9:0:0:1: [sdf] Write Protect is off [ 92.788324] sd 9:0:0:2: [sdg] 10737418240 512-byte logical blocks: (5.49 TB/5.00 TiB) [ 92.788407] scsi 9:0:0:3: Direct-Access SUN COMSTAR 1.0 PQ: 0 ANSI: 5 [ 92.788828] sd 9:0:0:1: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 92.789141] sd 9:0:0:3: Attached scsi generic sg9 type 0 [ 92.790147] sd 9:0:0:2: [sdg] Write Protect is off [ 92.791012] sd 9:0:0:3: [sdh] 2147483648 512-byte logical blocks: (1.09 TB/1.00 TiB) [ 92.791401] sd 9:0:0:2: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 92.792626] sd 9:0:0:3: [sdh] Write Protect is off [ 92.794877] sd 9:0:0:3: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 92.907234] sd 8:0:0:1: Attached scsi generic sg10 type 0 [ 92.917346] scsi 8:0:0:2: Direct-Access SUN COMSTAR 1.0 PQ: 0 ANSI: 5 [ 92.925534] sd 8:0:0:1: [sdi] 10737418240 512-byte logical blocks: (5.49 TB/5.00 TiB) [ 92.925788] sd 8:0:0:2: Attached scsi generic sg11 type 0 [ 92.937629] sLogin to [iface: default, target: iqn.1986-03.com.sun:02:8d376124-7768-4b73-a809-e9e7fe558eff, portal: 10.11.0.106,3260]: succed 9:0:0:3: [sdh]ssful Ad isk [ 92.938291] scsi 8:0:0:3: DirLogin to [iface: default, target: iqn.1986-03.com.sun:02:8d376124-7768-4b73-a809-e9e7fe558eff, portal: 10.10.0.106,3260]: succeect-Acc 1.0 PQ: 0 ANSI: 5 [ 92.938682] sd 8:0:0:3: Attached scsi generic sg12 type 0 [ 92.956808] sd 9:0:0:2: [sdg] Attached SCSI disk [ 92.956928] sd 8:0:0:2: [sdj] 10737418240 512-byte logical blocks: (5.49 TB/5.00 TiB) [ 92.989977] sd 9:0:0:1: [sdf] Attached SCSI disk [ 92.991326] sd 8:0:0:3: [sdk] 2147483648 512-byte logical blocks: (1.09 TB/1.00 TiB) [ 92.991461] sd 8:0:0:2: [sdj] Write Protect is off [ 92.994128] sd 8:0:0:3: [sdk] Write Protect is off [ 92.994213] sd 8:0:0:2: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 92.995407] sd 8:0:0:3: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 93.039257] sd 8:0:0:1: [sdi] Write Protect is off [ 93.042279] sd 8:0:0:2: [sdj] Attached SCSI disk [ 93.043254] sd 8:0:0:3: [sdk] Attached SCSI disk [ 93.060777] sd 8:0:0:1: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ OK ] [ 93.085058] sd 8:0:0:1: [sdi] Attached SCSI disk Starting portmap: [ OK ] Starting NFS statd: [ OK ] [ 93.665709] ------------[ cut here ]------------ [ 93.670340] WARNING: at arch/x86/xen/mmu.c:577 xen_make_pte_debug+0xce/0xda() [ 93.677521] Hardware name: PowerEdge M610 [ 93.681595] 0x55f79000 is missing VM_IO (and wasn't fixed)! [ 93.687238] Modules linked in: dm_round_robin lockd sunrpc crc32c 8021q garp stp bonding iscsi_tcp libiscsi_tcp bnx2i libiscsi scsi_transport_iscsi cnic uio dm_muls [ 93.687377] Pid: 3398, comm: multipathd Tainted: G W 2.6.38-rc8+ #2 [ 93.687382] Call Trace: [ 93.687394] [] ? xen_make_pte_debug+0xce/0xda [ 93.687407] [] ? warn_slowpath_common+0x80/0x99 [ 93.687418] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 93.687431] [] ? spin_unlock+0x17/0x1b [ 93.687442] [] ? vma_adjust+0x398/0x44a [ 93.687454] [] ? pvclock_clocksource_read+0x48/0xb9 [ 93.687465] [] ? get_phys_to_machine+0x26/0x61 [ 93.687477] [] ? xen_make_pte+0x83/0x8d [ 93.687490] [] ? xen_make_pte_debug+0xce/0xda [ 93.687501] [] ? __raw_callee_save_xen_make_pte_debug+0x11/0x1e [ 93.687514] [] ? xen_pmd_val+0x9/0xb [ 93.687526] [] ? mprotect_fixup+0x50f/0x6b9 [ 93.687540] [] ? sys_mprotect+0x193/0x20c [ 93.687554] [] ? system_call_fastpath+0x16/0x1b [ 93.687561] ---[ end trace 4eaa2a86a8e2da32 ]--- [ 93.832976] ------------[ cut here ]------------ [ 93.837618] WARNING: at arch/x86/xen/mmu.c:577 xen_make_pte_debug+0xce/0xda() [ 93.837625] Hardware name: PowerEdge M610 [ 93.837635] 0x55f63000 is missing VM_IO (and wasn't fixed)! [ 93.837642] Modules linked in: dm_round_robin lockd sunrpc crc32c 8021q garp stp bonding iscsi_tcp libiscsi_tcp bnx2i libiscsi scsi_transport_iscsi cnic uio dm_muls [ 93.837712] Pid: 3398, comm: multipathd Tainted: G W 2.6.38-rc8+ #2 [ 93.837718] Call Trace: [ 93.837731] [] ? xen_make_pte_debug+0xce/0xda [ 93.837740] [] ? warn_slowpath_common+0x80/0x99 [ 93.837749] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 93.837760] [] ? spin_unlock+0x17/0x1b [ 93.837770] [] ? vma_adjust+0x398/0x44a [ 93.837780] [] ? pvclock_clocksource_read+0x48/0xb9 [ 93.837791] [] ? get_phys_to_machine+0x26/0x61 [ 93.837800] [] ? xen_make_pte+0x83/0x8d [ 93.837811] [] ? xen_make_pte_debug+0xce/0xda [ 93.837821] [] ? __raw_callee_save_xen_make_pte_debug+0x11/0x1e [ 93.837830] [] ? xen_pmd_val+0x9/0xb [ 93.837840] [] ? mprotect_fixup+0x50f/0x6b9 [ 93.837850] [] ? sys_mprotect+0x193/0x20c [ 93.837861] [] ? system_call_fastpath+0x16/0x1b [ 93.837868] ---[ end trace 4eaa2a86a8e2da33 ]--- [ 94.022423] ------------[ cut here ]------------ [ 94.027059] WARNING: at arch/x86/xen/mmu.c:577 xen_make_pte_debug+0xce/0xda() [ 94.034239] Hardware name: PowerEdge M610 [ 94.038316] 0x558b5000 is missing VM_IO (and wasn't fixed)! Starting RPC idmapd: [ 94.043950] Modules linked in: dm_round_robin lockd sunrpc crc32c 8021q garp stp bonding iscsi_tcp libiscsi_tcp bnx2i libiscsi scsi_transport_s [ 94.043985] Pid: 3398, comm: multipathd Tainted: G W 2.6.38-rc8+ #2 [ 94.043988] Call Trace: [ 94.043997] [] ? xen_make_pte_debug+0xce/0xda [ 94.044003] [] ? warn_slowpath_common+0x80/0x99 [ 94.044009] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 94.044017] [] ? spin_unlock+0x17/0x1b [ 94.044023] [] ? vma_adjust+0x398/0x44a [ 94.044030] [] ? pvclock_clocksource_read+0x48/0xb9 [ 94.044037] [] ? get_phys_to_machine+0x26/0x61 [ 94.044043] [] ? xen_make_pte+0x83/0x8d [ 94.044048] [] ? xen_make_pte_debug+0xce/0xda [ 94.044054] [] ? __raw_callee_save_xen_make_pte_debug+0x11/0x1e [ 94.044060] [] ? xen_pmd_val+0x9/0xb [ 94.044067] [] ? mprotect_fixup+0x50f/0x6b9 [ 94.044074] [] ? sys_mprotect+0x193/0x20c [ 94.044081] [] ? system_call_fastpath+0x16/0x1b [ 94.044085] ---[ end trace 4eaa2a86a8e2da34 ]--- [ 94.207453] ------------[ cut here ]------------ [ 94.212078] WARNING: at arch/x86/xen/mmu.c:577 xen_make_pte_debug+0xce/0xda() [ 94.219258] Hardware name: PowerEdge M610 [ 94.223331] 0x55e2d000 is missing VM_IO (and wasn't fixed)! [ 94.228965] Modules linked in: dm_round_robin lockd sunrpc crc32c 8021q garp stp bonding iscsi_tcp libiscsi_tcp bnx2i libiscsi scsi_transport_iscsi cnic uio dm_muls [ 94.245691] Pid: 3398, comm: multipathd Tainted: G W 2.6.38-rc8+ #2 [ 94.252799] Call Trace: [ 94.255321] [] ? xen_make_pte_debug+0xce/0xda [ 94.261383] [] ? warn_slowpath_common+0x80/0x99 [ 94.267626] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 94.273606] [] ? spin_unlock+0x17/0x1b [ 94.279368] [] ? vma_adjust+0x398/0x44a [ 94.284919] [] ? pvclock_clocksource_read+0x48/0xb9 [ 94.291518] [] ? get_phys_to_machine+0x26/0x61 [ 94.297642] [] ? xen_make_pte+0x83/0x8d [ 94.303205] [] ? xen_make_pte_debug+0xce/0xda [ 94.309283] [] ? __raw_callee_save_xen_make_pte_debug+0x11/0x1e [ 94.316857] [] ? xen_pmd_val+0x9/0xb [ 94.322144] [] ? mprotect_fixup+0x50f/0x6b9 [ 94.328162] [] ? sys_mprotect+0x193/0x20c [ 94.333822] [] ? system_call_fastpath+0x16/0x1b [ 94.340106] ---[ end trace 4eaa2a86a8e2da35 ]--- [ OK ] Starting firewall: ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) cannot init xl context Firewall [ OK ] [ OK ] Starting system message bus: [ OK ] Starting o2cb: Loading filesystem "configfs": OK Mounting configfs filesystem at /sys/kernel/config: OK Loading stack plugin "o2cb": OK Loading filesystem "ocfs2_dlmfs": [ 96.449535] OCFS2 User DLM kernel interface loaded OK Mounting ocfs2_dlmfs filesystem at /dlm: OK Setting cluster stack "o2cb": OK Starting O2CB cluster teclacluster: OK [ OK ] Mounting NFS filesystems: [ 100.017313] FS-Cache: Loaded [ 100.048638] FS-Cache: Netfs 'nfs' registered for caching [ 100.061239] svc: failed to register lockdv1 RPC service (errno 97). [ OK ] Mounting other filesystems: [ OK ] Starting acpi daemon: [ OK ] Starting HAL daemon: [ OK ] Starting autofs: Starting automount: [ OK ] [ OK ] Starting sshd: [ OK ] Starting cups: [ OK ] Starting ntpd: [ OK ] [ 107.784685] ------------[ cut here ]------------ Starting sendmail: [ 107.789298] WARNING: at arch/x86/xen/mmu.c:577 xen_make_pte_debug+0xce/0xda() [ 107.798134] Hardware name: PowerEdge M610 [ 107.802207] 0x7839f000 is missing VM_IO (and wasn't fixed)! [ 107.807843] Modules linked in: nfs fscache nfs_acl auth_rpcgss ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs arptable_filter ars [ 107.840083] Pid: 5406, comm: ntpd Tainted: G W 2.6.38-rc8+ #2 [ 107.846668] Call Trace: [ 107.849190] [] ? xen_make_pte_debug+0xce/0xda [ 107.855258] [] ? warn_slowpath_common+0x80/0x99 [ 107.855264] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 107.855273] [] ? xen_spin_unlock+0x11/0x31 [ 107.855280] [] ? vma_adjust+0x3ac/0x44a [ 107.855286] [] ? check_events+0x12/0x20 [ 107.855293] [] ? pvclock_clocksource_read+0x48/0xb9 [ 107.855299] [] ? get_phys_to_machine+0x26/0x61 [ 107.855304] [] ? xen_make_pte+0x83/0x8d [ 107.855310] [] ? xen_make_pte_debug+0xce/0xda [ 107.855316] [] ? __raw_callee_save_xen_make_pte_debug+0x11/0x1e [ 107.855321] [] ? xen_pmd_val+0x9/0xb [ 107.855327] [] ? mprotect_fixup+0x50f/0x6b9 [ 107.855334] [] ? sys_mprotect+0x193/0x20c [ 107.855340] [] ? system_call_fastpath+0x16/0x1b [ 107.855344] ---[ end trace 4eaa2a86a8e2da36 ]--- [ 107.855349] ------------[ cut here ]------------ [ 107.855353] WARNING: at arch/x86/xen/mmu.c:577 xen_make_pte_debug+0xce/0xda() [ 107.855356] Hardware name: PowerEdge M610 [ 107.855359] 0x783a0000 is missing VM_IO (and wasn't fixed)! [ 107.855362] Modules linked in: nfs fscache nfs_acl auth_rpcgss ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs arptable_filter ars [ 107.855413] Pid: 5406, comm: ntpd Tainted: G W 2.6.38-rc8+ #2 [ 107.855416] Call Trace: [ 107.855421] [] ? xen_make_pte_debug+0xce/0xda [ 107.855426] [] ? warn_slowpath_common+0x80/0x99 [ 107.855432] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 107.855437] [] ? xen_spin_unlock+0x11/0x31 [ 107.855442] [] ? vma_adjust+0x3ac/0x44a [ 107.855448] [] ? check_events+0x12/0x20 [ 107.855453] [] ? pvclock_clocksource_read+0x48/0xb9 [ 107.855460] [] ? get_phys_to_machine+0x26/0x61 [ 107.855465] [] ? xen_make_pte+0x83/0x8d [ 107.855470] [] ? xen_make_pte_debug+0xce/0xda [ 107.855476] [] ? __raw_callee_save_xen_make_pte_debug+0x11/0x1e [ 107.855482] [] ? mprotect_fixup+0x50f/0x6b9 [ 107.855488] [] ? sys_mprotect+0x193/0x20c [ 107.855494] [] ? system_call_fastpath+0x16/0x1b [ 107.855498] ---[ end trace 4eaa2a86a8e2da37 ]--- [ 107.855501] ------------[ cut here ]------------ [ 107.855505] WARNING: at arch/x86/xen/mmu.c:577 xen_make_pte_debug+0xce/0xda() [ 107.855508] Hardware name: PowerEdge M610 [ 107.855511] 0x783b0000 is missing VM_IO (and wasn't fixed)! [ 107.855514] Modules linked in: nfs fscache nfs_acl auth_rpcgss ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs arptable_filter ars [ 107.855564] Pid: 5406, comm: ntpd Tainted: G W 2.6.38-rc8+ #2 [ 107.855567] Call Trace: [ 107.855572] [] ? xen_make_pte_debug+0xce/0xda [ 107.855577] [] ? warn_slowpath_common+0x80/0x99 [ 107.855583] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 107.855588] [] ? xen_spin_unlock+0x11/0x31 [ 107.855593] [] ? vma_adjust+0x3ac/0x44a [ 107.855599] [] ? check_events+0x12/0x20 [ 107.855604] [] ? pvclock_clocksource_read+0x48/0xb9 [ 107.855610] [] ? get_phys_to_machine+0x26/0x61 [ 107.855616] [] ? xen_make_pte+0x83/0x8d [ 107.855621] [] ? xen_make_pte_debug+0xce/0xda [ 107.855627] [] ? __raw_callee_save_xen_make_pte_debug+0x11/0x1e [ 107.855633] [] ? mprotect_fixup+0x50f/0x6b9 [ 107.855639] [] ? sys_mprotect+0x193/0x20c [ 107.855645] [] ? system_call_fastpath+0x16/0x1b [ 107.855649] ---[ end trace 4eaa2a86a8e2da38 ]--- [ 107.855651] ------------[ cut here ]------------ [ 107.855656] WARNING: at arch/x86/xen/mmu.c:577 xen_make_pte_debug+0xce/0xda() [ 107.855659] Hardware name: PowerEdge M610 [ 107.855662] 0x783b1000 is missing VM_IO (and wasn't fixed)! [ 107.855664] Modules linked in: nfs fscache nfs_acl auth_rpcgss ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs arptable_filter ars [ 107.855714] Pid: 5406, comm: ntpd Tainted: G W 2.6.38-rc8+ #2 [ 107.855717] Call Trace: [ 107.855722] [] ? xen_make_pte_debug+0xce/0xda [ 107.855728] [] ? warn_slowpath_common+0x80/0x99 [ 107.855733] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 107.855738] [] ? xen_spin_unlock+0x11/0x31 [ 107.855744] [] ? vma_adjust+0x3ac/0x44a [ 107.855749] [] ? check_events+0x12/0x20 [ 107.855755] [] ? pvclock_clocksource_read+0x48/0xb9 [ 107.855761] [] ? get_phys_to_machine+0x26/0x61 [ 107.855766] [] ? xen_make_pte+0x83/0x8d [ 107.855772] [] ? xen_make_pte_debug+0xce/0xda [ 107.855777] [] ? __raw_callee_save_xen_make_pte_debug+0x11/0x1e [ 107.855783] [] ? mprotect_fixup+0x50f/0x6b9 [ 107.855790] [] ? sys_mprotect+0x193/0x20c [ 107.855795] [] ? system_call_fastpath+0x16/0x1b [ 107.855799] ---[ end trace 4eaa2a86a8e2da39 ]--- [ 107.858127] ------------[ cut here ]------------ [ 107.858136] WARNING: at arch/x86/xen/mmu.c:577 xen_make_pte_debug+0xce/0xda() [ 107.858140] Hardware name: PowerEdge M610 [ 107.858147] 0x78109000 is missing VM_IO (and wasn't fixed)! [ 107.858150] Modules linked in: nfs fscache nfs_acl auth_rpcgss ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs arptable_filter ars [ 107.858227] Pid: 5406, comm: ntpd Tainted: G W 2.6.38-rc8+ #2 [ 107.858231] Call Trace: [ 107.858237] [] ? xen_make_pte_debug+0xce/0xda [ 107.858244] [] ? warn_slowpath_common+0x80/0x99 [ 107.858249] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 107.858255] [] ? xen_spin_unlock+0x11/0x31 [ 107.858262] [] ? vma_adjust+0x3ac/0x44a [ 107.858269] [] ? check_events+0x12/0x20 [ 107.858275] [] ? pvclock_clocksource_read+0x48/0xb9 [ 107.858283] [] ? get_phys_to_machine+0x26/0x61 [ 107.858290] [] ? xen_make_pte+0x83/0x8d [ 107.858297] [] ? xen_make_pte_debug+0xce/0xda [ 107.858307] [] ? __raw_callee_save_xen_make_pte_debug+0x11/0x1e [ 107.858317] [] ? xen_pmd_val+0x9/0xb [ 107.858325] [] ? mprotect_fixup+0x50f/0x6b9 [ 107.858333] [] ? sys_mprotect+0x193/0x20c [ 107.858342] [] ? system_call_fastpath+0x16/0x1b [ 107.858346] ---[ end trace 4eaa2a86a8e2da3a ]--- [ 107.858350] ------------[ cut here ]------------ [ 107.858356] WARNING: at arch/x86/xen/mmu.c:577 xen_make_pte_debug+0xce/0xda() [ 107.858361] Hardware name: PowerEdge M610 [ 107.858364] 0x7810a000 is missing VM_IO (and wasn't fixed)! [ 107.858369] Modules linked in: nfs fscache nfs_acl auth_rpcgss ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs arptable_filter ars [ 107.858452] Pid: 5406, comm: ntpd Tainted: G W 2.6.38-rc8+ #2 [ 107.858456] Call Trace: [ 107.858464] [] ? xen_make_pte_debug+0xce/0xda [ 107.858473] [] ? warn_slowpath_common+0x80/0x99 [ 107.858481] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 107.858488] [] ? xen_spin_unlock+0x11/0x31 [ 107.858498] [] ? vma_adjust+0x3ac/0x44a [ 107.858504] [] ? check_events+0x12/0x20 [ 107.858511] [] ? pvclock_clocksource_read+0x48/0xb9 [ 107.858519] [] ? get_phys_to_machine+0x26/0x61 [ 107.858525] [] ? xen_make_pte+0x83/0x8d [ 107.858531] [] ? xen_make_pte_debug+0xce/0xda [ 107.858537] [] ? __raw_callee_save_xen_make_pte_debug+0x11/0x1e [ 107.858545] [] ? mprotect_fixup+0x50f/0x6b9 [ 107.858556] [] ? sys_mprotect+0x193/0x20c [ 107.858565] [] ? system_call_fastpath+0x16/0x1b [ 107.858570] ---[ end trace 4eaa2a86a8e2da3b ]--- [ 107.859666] ------------[ cut here ]------------ [ 107.859674] WARNING: at arch/x86/xen/mmu.c:577 xen_make_pte_debug+0xce/0xda() [ 107.859678] Hardware name: PowerEdge M610 [ 107.859682] 0x74fe9000 is missing VM_IO (and wasn't fixed)! [ 107.859686] Modules linked in: nfs fscache nfs_acl auth_rpcgss ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs arptable_filter ars [ 107.859788] Pid: 5406, comm: ntpd Tainted: G W 2.6.38-rc8+ #2 [ 107.859792] Call Trace: [ 107.859801] [] ? xen_make_pte_debug+0xce/0xda [ 107.859809] [] ? warn_slowpath_common+0x80/0x99 [ 107.859817] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 107.859824] [] ? xen_spin_unlock+0x11/0x31 [ 107.859832] [] ? vma_adjust+0x3ac/0x44a [ 107.859838] [] ? check_events+0x12/0x20 [ 107.859848] [] ? pvclock_clocksource_read+0x48/0xb9 [ 107.859857] [] ? get_phys_to_machine+0x26/0x61 [ 107.859865] [] ? xen_make_pte+0x83/0x8d [ 107.859873] [] ? xen_make_pte_debug+0xce/0xda [ 107.859882] [] ? __raw_callee_save_xen_make_pte_debug+0x11/0x1e [ 107.859891] [] ? xen_pmd_val+0x9/0xb [ 107.859898] [] ? mprotect_fixup+0x50f/0x6b9 [ 107.859905] [] ? sys_mprotect+0x193/0x20c [ 107.859911] [] ? system_call_fastpath+0x16/0x1b [ 107.859915] ---[ end trace 4eaa2a86a8e2da3c ]--- [ 107.859919] ------------[ cut here ]------------ [ 107.859924] WARNING: at arch/x86/xen/mmu.c:577 xen_make_pte_debug+0xce/0xda() [ 107.859927] Hardware name: PowerEdge M610 [ 107.859930] 0x74fea000 is missing VM_IO (and wasn't fixed)! [ 107.859933] Modules linked in: nfs fscache nfs_acl auth_rpcgss ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs arptable_filter ars [ 107.860027] Pid: 5406, comm: ntpd Tainted: G W 2.6.38-rc8+ #2 [ 107.860031] Call Trace: [ 107.860041] [] ? xen_make_pte_debug+0xce/0xda [ 107.860047] [] ? warn_slowpath_common+0x80/0x99 [ 107.860056] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 107.860066] [] ? xen_spin_unlock+0x11/0x31 [ 107.860078] [] ? vma_adjust+0x3ac/0x44a [ 107.860084] [] ? check_events+0x12/0x20 [ 107.860091] [] ? pvclock_clocksource_read+0x48/0xb9 [ 107.860098] [] ? get_phys_to_machine+0x26/0x61 [ 107.860107] [] ? xen_make_pte+0x83/0x8d [ 107.860112] [] ? xen_make_pte_debug+0xce/0xda [ 107.860121] [] ? __raw_callee_save_xen_make_pte_debug+0x11/0x1e [ 107.860130] [] ? mprotect_fixup+0x50f/0x6b9 [ 107.860140] [] ? sys_mprotect+0x193/0x20c [ 107.860147] [] ? system_call_fastpath+0x16/0x1b [ 107.860151] ---[ end trace 4eaa2a86a8e2da3d ]--- [ 107.860155] ------------[ cut here ]------------ [ 107.860159] WARNING: at arch/x86/xen/mmu.c:577 xen_make_pte_debug+0xce/0xda() [ 107.860164] Hardware name: PowerEdge M610 [ 107.860167] 0x74feb000 is missing VM_IO (and wasn't fixed)! [ 107.860171] Modules linked in: nfs fscache nfs_acl auth_rpcgss ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs arptable_filter ars [ 107.860240] Pid: 5406, comm: ntpd Tainted: G W 2.6.38-rc8+ #2 [ 107.860245] Call Trace: [ 107.860251] [] ? xen_make_pte_debug+0xce/0xda [ 107.860257] [] ? warn_slowpath_common+0x80/0x99 [ 107.860263] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 107.860270] [] ? xen_spin_unlock+0x11/0x31 [ 107.860282] [] ? vma_adjust+0x3ac/0x44a [ 107.860290] [] ? check_events+0x12/0x20 [ 107.860297] [] ? pvclock_clocksource_read+0x48/0xb9 [ 107.860305] [] ? get_phys_to_machine+0x26/0x61 [ 107.860314] [] ? xen_make_pte+0x83/0x8d [ 107.860320] [] ? xen_make_pte_debug+0xce/0xda [ 107.860327] [] ? __raw_callee_save_xen_make_pte_debug+0x11/0x1e [ 107.860334] [] ? mprotect_fixup+0x50f/0x6b9 [ 107.860344] [] ? sys_mprotect+0x193/0x20c [ 107.860351] [] ? system_call_fastpath+0x16/0x1b [ 107.860356] ---[ end trace 4eaa2a86a8e2da3e ]--- [ 107.860361] ------------[ cut here ]------------ [ 107.860367] WARNING: at arch/x86/xen/mmu.c:577 xen_make_pte_debug+0xce/0xda() [ 107.860371] Hardware name: PowerEdge M610 [ 107.860375] 0x74fec000 is missing VM_IO (and wasn't fixed)! [ 107.860378] Modules linked in: nfs fscache nfs_acl auth_rpcgss ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs arptable_filter ars [ 107.860468] Pid: 5406, comm: ntpd Tainted: G W 2.6.38-rc8+ #2 [ 107.860472] Call Trace: [ 107.860478] [] ? xen_make_pte_debug+0xce/0xda [ 107.860484] [] ? warn_slowpath_common+0x80/0x99 [ 107.860493] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 107.860500] [] ? xen_spin_unlock+0x11/0x31 [ 107.860510] [] ? vma_adjust+0x3ac/0x44a [ 107.860519] [] ? check_events+0x12/0x20 [ 107.860527] [] ? pvclock_clocksource_read+0x48/0xb9 [ 107.860535] [] ? get_phys_to_machine+0x26/0x61 [ 107.860543] [] ? xen_make_pte+0x83/0x8d [ 107.860551] [] ? xen_make_pte_debug+0xce/0xda [ 107.860559] [] ? __raw_callee_save_xen_make_pte_debug+0x11/0x1e [ 107.860569] [] ? mprotect_fixup+0x50f/0x6b9 [ 107.860576] [] ? sys_mprotect+0x193/0x20c [ 107.860584] [] ? system_call_fastpath+0x16/0x1b [ 107.860589] ---[ end trace 4eaa2a86a8e2da3f ]--- [ 107.860593] ------------[ cut here ]------------ [ 107.860598] WARNING: at arch/x86/xen/mmu.c:577 xen_make_pte_debug+0xce/0xda() [ 107.860603] Hardware name: PowerEdge M610 [ 107.860608] 0x74fed000 is missing VM_IO (and wasn't fixed)! [ 107.860611] Modules linked in: nfs fscache nfs_acl auth_rpcgss ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs arptable_filter ars [ 107.860679] Pid: 5406, comm: ntpd Tainted: G W 2.6.38-rc8+ #2 [ 107.860682] Call Trace: [ 107.860691] [] ? xen_make_pte_debug+0xce/0xda [ 107.860700] [] ? warn_slowpath_common+0x80/0x99 [ 107.860710] [] ? warn_slowpath_fmt+0xa4/0xa6 [ 107.860719] [] ? xen_spin_unlock+0x11/0x31 [ 107.860728] [] ? vma_adjust+0x3ac/0x44a [ 107.860737] [] ? check_events+0x12/0x20 [ 107.860744] [] ? pvclock_clocksource_read+0x48/0xb9 [ 107.860755] [] ? get_phys_to_machine+0x26/0x61 [ 107.860766] [] ? xen_make_pte+0x83/0x8d [ 107.860775] [] ? xen_make_pte_debug+0xce/0xda [ 107.860781] [] ? __raw_callee_save_xen_make_pte_debug+0x11/0x1e [ 107.860788] [] ? mprotect_fixup+0x50f/0x6b9 [ 107.860795] [] ? sys_mprotect+0x193/0x20c [ 107.860801] [] ? system_call_fastpath+0x16/0x1b [ 107.860806] ---[ end trace 4eaa2a86a8e2da40 ]--- [ OK ] Starting sm-client: [ OK ] Starting console mouse services: [ OK ] Starting httpd: [ OK ] Starting crond: [ OK ] Starting xfs: [ OK ] Starting libvirtd daemon: [ OK ] Starting xend: [ 114.327508] Bridge firewalling registered [ 114.701632] XENBUS: Unable to read cpu state [ 114.706398] XENBUS: Unable to read cpu state [ 114.711241] XENBUS: Unable to read cpu state [ 114.715853] XENBUS: Unable to read cpu state [ 114.720526] XENBUS: Unable to read cpu state [ 114.725243] XENBUS: Unable to read cpu state [ 114.729878] XENBUS: Unable to read cpu state [ 114.734563] XENBUS: Unable to read cpu state ERROR: trying to add VLAN #1320 to IF -:bond0:- error: File exists [ OK ] Starting smartd: [ OK ]