On Mon, Feb 07, 2011 at 11:41:33AM -0500, Konrad Rzeszutek Wilk wrote:
> Joerg,
>
> Any idea what this error might signify?
> > (XEN) AMD_IOV: IO_PAGE_FALT: domain:3, device id:0x200, fault
> > address:0x7e7ca000
> > (XEN) AMD_IOV: IO_PAGE_FALT: domain:3, device id:0x200, fault
> > address:0x7e7ca040
> > (XEN) AMD_IOV: IO_PAGE_FALT: domain:3, device id:0x200, fault
> > address:0x7e7ca080
> > (XEN) AMD_IOV: IO_PAGE_FALT: domain:3, device id:0x200, fault
> > address:0x7e7ca0c0
>
> We have been stabing in the dark enabling certain knobs, .. but I am
> just curious - the fault address - that is the real physical address right?
> >From the looks of it looks like a normal RAM region, not the PCI BAR space -
> >the
> AMD VI chipset doesn't really distinguish between those, or does it?
>
> Ward, can you post your lspci -vvv -s 02:00.0 output? I am curious to see
> what the PCI BAR space is.
Of course, here it is. Booted into 2.6.32-5-xen-amd64 #1 SMP Wed Jan 12
05:46:49 UTC 2011 x86_64 GNU/Linux, from the dom0:
# lspci -vvv -s 02:00.0
02:00.0 InfiniBand: Mellanox Technologies MT26428 [ConnectX VPI PCIe 2.0 5GT/s
- IB QDR / 10GigE] (rev b0)
Subsystem: Super Micro Computer Inc Device 0048
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at fc800000 (64-bit, prefetchable) [size=8M]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data
pcilib: sysfs_read_vpd: read failed: Connection timed out
Not readable
Capabilities: [9c] MSI-X: Enable- Count=256 Masked-
Vector table: BAR=0 offset=0007c000
PBA: BAR=0 offset=0007d000
Capabilities: [60] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1
unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x8, ASPM L0s, Latency L0 unlimited,
L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk- DLActive- BWMgmt-
ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 1
ARICtl: MFVC- ACS-, Function Group: 0
Kernel driver in use: pciback
Thanks,
Ward.
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home