[ 0.000000] Linux version 2.6.32.26-xen-next-2.6.32.x-20101210 (root@serveerstertje) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #20 SMP Fri Dec 10 18:24:34 CET 2010 [ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro nomodeset vga=794 video=vesafb earlyprintk=xen max_loop=255 loop_max_part=63 iommu=soft xen-pciback.hide=(03:06.0)(04:00.0)(04:00.1)(04:00.2)(04:00.3)(04:00.4)(04:00.5)(04:00.6)(04:00.7)(0a:00.0)(0a:00.1)(0a:00.2)(0a:00.3)(0a:00.4)(0a:00.5)(0a:00.6)(0a:00.7)(05:00.0)(05:00.1) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009b000 (usable) [ 0.000000] Xen: 000000000009b000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000030000000 (usable) [ 0.000000] Xen: 00000000aff90000 - 00000000aff9e000 (ACPI data) [ 0.000000] Xen: 00000000aff9e000 - 00000000affe0000 (ACPI NVS) [ 0.000000] Xen: 00000000affe0000 - 00000000b0000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] Xen: 00000000fec20000 - 00000000fec21000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 00000002b0000000 (usable) [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x2b0000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 [ 0.000000] last_pfn = 0x30000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009b000 (usable) [ 0.000000] modified: 000000000009b000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000030000000 (usable) [ 0.000000] modified: 00000000aff90000 - 00000000aff9e000 (ACPI data) [ 0.000000] modified: 00000000aff9e000 - 00000000affe0000 (ACPI NVS) [ 0.000000] modified: 00000000affe0000 - 00000000b0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fec20000 - 00000000fec21000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 00000002b0000000 (usable) [ 0.000000] initial memory mapped : 0 - 033ff000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000030000000 [ 0.000000] 0000000000 - 0030000000 page 4k [ 0.000000] kernel direct mapping tables up to 30000000 @ 100000-282000 [ 0.000000] init_memory_mapping: 0000000100000000-00000002b0000000 [ 0.000000] 0100000000 - 02b0000000 page 4k [ 0.000000] kernel direct mapping tables up to 2b0000000 @ 289f000-3e2b000 [ 0.000000] RAMDISK: 01e3a000 - 02704c00 [ 0.000000] ACPI: RSDP 00000000000fb100 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000aff90000 00048 (v01 MSI OEMSLIC 20100913 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000aff90200 00084 (v01 7640MS A7640100 20100913 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000aff905e0 09427 (v01 A7640 A7640100 00000100 INTL 20051117) [ 0.000000] ACPI: FACS 00000000aff9e000 00040 [ 0.000000] ACPI: APIC 00000000aff90390 00088 (v01 7640MS A7640100 20100913 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000aff90420 0003C (v01 7640MS OEMMCFG 20100913 MSFT 00000097) [ 0.000000] ACPI: SLIC 00000000aff90460 00176 (v01 MSI OEMSLIC 20100913 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000aff9e040 00072 (v01 7640MS A7640100 20100913 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000aff9a5e0 00108 (v03 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 00000000aff9a6f0 00038 (v01 7640MS OEMHPET 20100913 MSFT 00000097) [ 0.000000] ACPI: IVRS 00000000aff9a730 00100 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.000000] ACPI: SSDT 00000000aff9a830 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 02b0000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0002886000 - 000289f000] XEN PAGETABLES ==> [0002886000 - 000289f000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001d0fb08] TEXT DATA BSS ==> [0001000000 - 0001d0fb08] [ 0.000000] #4 [0001e3a000 - 0002704c00] RAMDISK ==> [0001e3a000 - 0002704c00] [ 0.000000] #5 [0002705000 - 0002886000] XEN START INFO ==> [0002705000 - 0002886000] [ 0.000000] #6 [0100000000 - 02b0000000] XEN EXTRA ==> [0100000000 - 02b0000000] [ 0.000000] #7 [0001d10000 - 0001d1c10b] BRK ==> [0001d10000 - 0001d1c10b] [ 0.000000] #8 [0000100000 - 0000266000] PGTABLE ==> [0000100000 - 0000266000] [ 0.000000] #9 [000289f000 - 0003626000] PGTABLE ==> [000289f000 - 0003626000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x002b0000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009b [ 0.000000] 0: 0x00000100 -> 0x00030000 [ 0.000000] 0: 0x00100000 -> 0x002b0000 [ 0.000000] On node 0 totalpages: 1965963 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 361 pages reserved [ 0.000000] DMA zone: 3562 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 178232 pages, LIFO batch:31 [ 0.000000] Normal zone: 24192 pages used for memmap [ 0.000000] Normal zone: 1745280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 6, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 7, version 0, address 0xfec20000, GSI 24-24 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 280 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:7ff90000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1-unstable (preserve-AD) (dom0) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880028038000 s83288 r8192 d23208 u114688 [ 0.000000] pcpu-alloc: s83288 r8192 d23208 u114688 alloc=28*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1927074 [ 0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro nomodeset vga=794 video=vesafb earlyprintk=xen max_loop=255 loop_max_part=63 iommu=soft xen-pciback.hide=(03:06.0)(04:00.0)(04:00.1)(04:00.2)(04:00.3)(04:00.4)(04:00.5)(04:00.6)(04:00.7)(0a:00.0)(0a:00.1)(0a:00.2)(0a:00.3)(0a:00.4)(0a:00.5)(0a:00.6)(0a:00.7)(05:00.0)(05:00.1) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] DMA: software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff880024060000 size=32768 [ 0.000000] Memory: 559244k/11272192k available (7657k kernel code, 3408340k absent, 7303940k reserved, 4087k data, 860k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:1792 [ 0.000000] xen: --> irq=0 [ 0.000000] xen: --> irq=1 [ 0.000000] xen: --> irq=2 [ 0.000000] xen: --> irq=3 [ 0.000000] xen: --> irq=4 [ 0.000000] xen: --> irq=5 [ 0.000000] xen: --> irq=6 [ 0.000000] xen: --> irq=7 [ 0.000000] xen: --> irq=8 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: --> irq=10 [ 0.000000] xen: --> irq=11 [ 0.000000] xen: --> irq=12 [ 0.000000] xen: --> irq=13 [ 0.000000] xen: --> irq=14 [ 0.000000] xen: --> irq=15 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=3 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 1 [ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: acpi sci 9 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] alloc irq_desc for 1791 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] Detected 759607.949 MHz processor. [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.44 BogoMIPS (lpj=3200222) [ 0.001016] Security Framework initialized [ 0.001022] SELinux: Initializing. [ 0.001030] SELinux: Starting in permissive mode [ 0.001038] Mount-cache hash table entries: 256 [ 0.001220] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.001225] CPU: L2 Cache: 512K (64 bytes/line) [ 0.001230] tseg: 0000000000 [ 0.001238] CPU: Physical Processor ID: 0 [ 0.001241] CPU: Processor Core ID: 0 [ 0.001246] mce: CPU supports 6 MCE banks [ 0.001271] SMP alternatives: switching to UP code [ 0.003392] ACPI: Core revision 20090903 [ 0.016011] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.016017] ftrace: allocating 27261 entries in 107 pages [ 0.017058] alloc irq_desc for 1790 on node 0 [ 0.017061] alloc kstat_irqs on node 0 [ 0.017071] cpu 0 spinlock event irq 1790 [ 0.017077] alloc irq_desc for 1789 on node 0 [ 0.017079] alloc kstat_irqs on node 0 [ 0.017084] alloc irq_desc for 1788 on node 0 [ 0.017086] alloc kstat_irqs on node 0 [ 0.017091] alloc irq_desc for 1787 on node 0 [ 0.017094] alloc kstat_irqs on node 0 [ 0.017099] alloc irq_desc for 1786 on node 0 [ 0.017102] alloc kstat_irqs on node 0 [ 0.017374] installing Xen timer for CPU 1 [ 0.017378] alloc irq_desc for 1785 on node 0 [ 0.017380] alloc kstat_irqs on node 0 [ 0.017387] alloc irq_desc for 1784 on node 0 [ 0.017390] alloc kstat_irqs on node 0 [ 0.017395] cpu 1 spinlock event irq 1784 [ 0.017421] SMP alternatives: switching to SMP code [ 0.018997] alloc irq_desc for 1783 on node 0 [ 0.018997] alloc kstat_irqs on node 0 [ 0.019003] alloc irq_desc for 1782 on node 0 [ 0.019006] alloc kstat_irqs on node 0 [ 0.019011] alloc irq_desc for 1781 on node 0 [ 0.019014] alloc kstat_irqs on node 0 [ 0.019020] alloc irq_desc for 1780 on node 0 [ 0.019022] alloc kstat_irqs on node 0 [ 0.000999] Initializing CPU#1 [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.019211] installing Xen timer for CPU 2 [ 0.019221] alloc irq_desc for 1779 on node 0 [ 0.019223] alloc kstat_irqs on node 0 [ 0.019230] alloc irq_desc for 1778 on node 0 [ 0.019232] alloc kstat_irqs on node 0 [ 0.019238] cpu 2 spinlock event irq 1778 [ 0.019260] alloc irq_desc for 1777 on node 0 [ 0.019263] alloc kstat_irqs on node 0 [ 0.019269] alloc irq_desc for 1776 on node 0 [ 0.019271] alloc kstat_irqs on node 0 [ 0.019277] alloc irq_desc for 1775 on node 0 [ 0.019279] alloc kstat_irqs on node 0 [ 0.019285] alloc irq_desc for 1774 on node 0 [ 0.019288] alloc kstat_irqs on node 0 [ 0.000999] Initializing CPU#2 [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 2 [ 0.019475] installing Xen timer for CPU 3 [ 0.019484] alloc irq_desc for 1773 on node 0 [ 0.019487] alloc kstat_irqs on node 0 [ 0.019493] alloc irq_desc for 1772 on node 0 [ 0.019496] alloc kstat_irqs on node 0 [ 0.019501] cpu 3 spinlock event irq 1772 [ 0.019521] alloc irq_desc for 1771 on node 0 [ 0.019524] alloc kstat_irqs on node 0 [ 0.019530] alloc irq_desc for 1770 on node 0 [ 0.019532] alloc kstat_irqs on node 0 [ 0.019538] alloc irq_desc for 1769 on node 0 [ 0.019541] alloc kstat_irqs on node 0 [ 0.019547] alloc irq_desc for 1768 on node 0 [ 0.019550] alloc kstat_irqs on node 0 [ 0.000999] Initializing CPU#3 [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 3 [ 0.019718] installing Xen timer for CPU 4 [ 0.019727] alloc irq_desc for 1767 on node 0 [ 0.019729] alloc kstat_irqs on node 0 [ 0.019736] alloc irq_desc for 1766 on node 0 [ 0.019738] alloc kstat_irqs on node 0 [ 0.019744] cpu 4 spinlock event irq 1766 [ 0.019763] alloc irq_desc for 1765 on node 0 [ 0.019765] alloc kstat_irqs on node 0 [ 0.019772] alloc irq_desc for 1764 on node 0 [ 0.019774] alloc kstat_irqs on node 0 [ 0.019780] alloc irq_desc for 1763 on node 0 [ 0.019782] alloc kstat_irqs on node 0 [ 0.019788] alloc irq_desc for 1762 on node 0 [ 0.019791] alloc kstat_irqs on node 0 [ 0.000999] Initializing CPU#4 [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 4 [ 0.019959] installing Xen timer for CPU 5 [ 0.019968] alloc irq_desc for 1761 on node 0 [ 0.019970] alloc kstat_irqs on node 0 [ 0.019977] alloc irq_desc for 1760 on node 0 [ 0.019979] alloc kstat_irqs on node 0 [ 0.019985] cpu 5 spinlock event irq 1760 [ 0.019996] alloc irq_desc for 1759 on node 0 [ 0.019996] alloc kstat_irqs on node 0 [ 0.019996] alloc irq_desc for 1758 on node 0 [ 0.019996] alloc kstat_irqs on node 0 [ 0.019996] alloc irq_desc for 1757 on node 0 [ 0.019996] alloc kstat_irqs on node 0 [ 0.019996] alloc irq_desc for 1756 on node 0 [ 0.019996] alloc kstat_irqs on node 0 [ 0.000999] Initializing CPU#5 [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 5 [ 0.020072] Brought up 6 CPUs [ 0.020090] CPU0 attaching sched-domain: [ 0.020098] domain 0: span 0-5 level CPU [ 0.020105] groups: 0 1 2 3 4 5 [ 0.020123] CPU1 attaching sched-domain: [ 0.020125] domain 0: span 0-5 level CPU [ 0.020130] groups: 1 2 3 4 5 0 [ 0.020151] CPU2 attaching sched-domain: [ 0.020154] domain 0: span 0-5 level CPU [ 0.020159] groups: 2 3 4 5 0 1 [ 0.020176] CPU3 attaching sched-domain: [ 0.020179] domain 0: span 0-5 level CPU [ 0.020183] groups: 3 4 5 0 1 2 [ 0.020199] CPU4 attaching sched-domain: [ 0.020202] domain 0: span 0-5 level CPU [ 0.020206] groups: 4 5 0 1 2 3 [ 0.020222] CPU5 attaching sched-domain: [ 0.020225] domain 0: span 0-5 level CPU [ 0.020229] groups: 5 0 1 2 3 4 [ 0.021310] Grant table initialized [ 0.021310] regulator: core version 0.5 [ 0.021310] NET: Registered protocol family 16 [ 0.022031] alloc irq_desc for 1755 on node 0 [ 0.022031] alloc kstat_irqs on node 0 [ 0.022054] node 0 link 0: io port [1000, ffffff] [ 0.022054] TOM: 00000000b0000000 aka 2816M [ 0.022054] Fam 10h mmconf [e0000000, efffffff] [ 0.022054] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.022054] node 0 link 0: mmio [f0000000, ffffffff] [ 0.022054] node 0 link 0: mmio [a0000, bffff] [ 0.022054] node 0 link 0: mmio [b0000000, dfffffff] [ 0.022054] TOM2: 0000000250000000 aka 9472M [ 0.022059] bus: [00,07] on node 0 link 0 [ 0.022062] bus: 00 index 0 io port: [0, ffff] [ 0.022065] bus: 00 index 1 mmio: [f0000000, ffffffff] [ 0.022068] bus: 00 index 2 mmio: [a0000, bffff] [ 0.022071] bus: 00 index 3 mmio: [b0000000, dfffffff] [ 0.022074] bus: 00 index 4 mmio: [250000000, fcffffffff] [ 0.023503] ACPI: bus type pci registered [ 0.023527] sync cpu 0 get result 1 max_id 5 [ 0.023527] sync cpu 1 get result 1 max_id 5 [ 0.023527] sync cpu 2 get result 1 max_id 5 [ 0.023527] sync cpu 3 get result 1 max_id 5 [ 0.024002] sync cpu 4 get result 1 max_id 5 [ 0.024019] sync cpu 5 get result 1 max_id 5 [ 0.024019] alloc irq_desc for 1754 on node 0 [ 0.024019] alloc kstat_irqs on node 0 [ 0.024078] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.024078] PCI: Not using MMCONFIG. [ 0.024078] PCI: Using configuration type 1 for base access [ 0.024078] PCI: Using configuration type 1 for extended access [ 0.042044] bio: create slab at 0 [ 0.045063] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.045116] ACPI: EC: Look up EC in DSDT [ 0.047043] ACPI Error (dswload-0659): [PCI0] Namespace lookup failure, AE_NOT_FOUND [ 0.047053] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230) [ 0.047063] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81cf1c00), AE_NOT_FOUND [ 0.047193] ACPI: Executed 3 blocks of module-level executable AML code [ 0.060921] ACPI: Interpreter enabled [ 0.060928] ACPI: (supports S0 S5) [ 0.060948] ACPI: Using IOAPIC for interrupt routing [ 0.060990] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.062852] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.122099] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.144099] ACPI Warning: Incorrect checksum in table [OEMB] - B2, should be B1 (20090903/tbutils-314) [ 0.144528] ACPI: No dock devices found. [ 0.144728] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.145017] PCI: Scanning bus 0000:00 [ 0.145021] pci 0000:00:00.0: found [1002:5a11] class 000600 header type 00 [ 0.145029] pci 0000:00:00.0: calling quirk_no_ata_d3+0x0/0x22 [ 0.145090] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.145197] pci 0000:00:00.2: found [1002:5a23] class 000806 header type 00 [ 0.145224] pci 0000:00:00.2: calling quirk_no_ata_d3+0x0/0x22 [ 0.145280] pci 0000:00:00.2: calling quirk_resource_alignment+0x0/0x1bd [ 0.145352] pci 0000:00:02.0: found [1002:5a16] class 000604 header type 01 [ 0.145363] pci 0000:00:02.0: calling quirk_no_ata_d3+0x0/0x22 [ 0.145398] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.145432] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.145440] pci 0000:00:02.0: PME# disabled [ 0.145474] pci 0000:00:03.0: found [1002:5a17] class 000604 header type 01 [ 0.145484] pci 0000:00:03.0: calling quirk_no_ata_d3+0x0/0x22 [ 0.145516] pci 0000:00:03.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.145549] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.145555] pci 0000:00:03.0: PME# disabled [ 0.145597] pci 0000:00:05.0: found [1002:5a19] class 000604 header type 01 [ 0.145608] pci 0000:00:05.0: calling quirk_no_ata_d3+0x0/0x22 [ 0.145640] pci 0000:00:05.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.145672] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.145678] pci 0000:00:05.0: PME# disabled [ 0.145713] pci 0000:00:06.0: found [1002:5a1a] class 000604 header type 01 [ 0.145724] pci 0000:00:06.0: calling quirk_no_ata_d3+0x0/0x22 [ 0.145756] pci 0000:00:06.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.145788] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.145795] pci 0000:00:06.0: PME# disabled [ 0.145836] pci 0000:00:0a.0: found [1002:5a1d] class 000604 header type 01 [ 0.145847] pci 0000:00:0a.0: calling quirk_no_ata_d3+0x0/0x22 [ 0.145879] pci 0000:00:0a.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.145911] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.145922] pci 0000:00:0a.0: PME# disabled [ 0.145957] pci 0000:00:0b.0: found [1002:5a1f] class 000604 header type 01 [ 0.145967] pci 0000:00:0b.0: calling quirk_no_ata_d3+0x0/0x22 [ 0.145977] pci 0000:00:0b.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.145977] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold [ 0.145977] pci 0000:00:0b.0: PME# disabled [ 0.145977] pci 0000:00:0d.0: found [1002:5a1e] class 000604 header type 01 [ 0.145977] pci 0000:00:0d.0: calling quirk_no_ata_d3+0x0/0x22 [ 0.145977] pci 0000:00:0d.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.145977] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold [ 0.145977] pci 0000:00:0d.0: PME# disabled [ 0.145977] pci 0000:00:11.0: found [1002:4391] class 000106 header type 00 [ 0.145977] pci 0000:00:11.0: calling quirk_no_ata_d3+0x0/0x22 [ 0.145977] pci 0000:00:11.0: reg 10 io port: [0x7000-0x7007] [ 0.145977] pci 0000:00:11.0: reg 14 io port: [0x6000-0x6003] [ 0.145977] pci 0000:00:11.0: reg 18 io port: [0x5000-0x5007] [ 0.145977] pci 0000:00:11.0: reg 1c io port: [0x3000-0x3003] [ 0.145977] pci 0000:00:11.0: reg 20 io port: [0x2000-0x200f] [ 0.145977] pci 0000:00:11.0: reg 24 32bit mmio: [0xf98ff000-0xf98ff3ff] [ 0.145977] pci 0000:00:11.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.145977] pci 0000:00:12.0: found [1002:4397] class 000c03 header type 00 [ 0.145977] pci 0000:00:12.0: calling quirk_no_ata_d3+0x0/0x22 [ 0.145977] pci 0000:00:12.0: reg 10 32bit mmio: [0xf98fb000-0xf98fbfff] [ 0.145977] pci 0000:00:12.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.145977] pci 0000:00:12.2: found [1002:4396] class 000c03 header type 00 [ 0.145977] pci 0000:00:12.2: calling quirk_no_ata_d3+0x0/0x22 [ 0.145977] pci 0000:00:12.2: reg 10 32bit mmio: [0xf98ff400-0xf98ff4ff] [ 0.145977] pci 0000:00:12.2: calling quirk_resource_alignment+0x0/0x1bd [ 0.145977] pci 0000:00:12.2: supports D1 D2 [ 0.145977] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.145977] pci 0000:00:12.2: PME# disabled [ 0.145977] pci 0000:00:13.0: found [1002:4397] class 000c03 header type 00 [ 0.145977] pci 0000:00:13.0: calling quirk_no_ata_d3+0x0/0x22 [ 0.145977] pci 0000:00:13.0: reg 10 32bit mmio: [0xf98fc000-0xf98fcfff] [ 0.145977] pci 0000:00:13.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.145977] pci 0000:00:13.2: found [1002:4396] class 000c03 header type 00 [ 0.145977] pci 0000:00:13.2: calling quirk_no_ata_d3+0x0/0x22 [ 0.145977] pci 0000:00:13.2: reg 10 32bit mmio: [0xf98ff800-0xf98ff8ff] [ 0.145977] pci 0000:00:13.2: calling quirk_resource_alignment+0x0/0x1bd [ 0.145977] pci 0000:00:13.2: supports D1 D2 [ 0.145977] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.145977] pci 0000:00:13.2: PME# disabled [ 0.145977] pci 0000:00:14.0: found [1002:4385] class 000c05 header type 00 [ 0.145977] pci 0000:00:14.0: calling quirk_no_ata_d3+0x0/0x22 [ 0.145977] pci 0000:00:14.0: calling sb600_disable_hpet_bar+0x0/0x60 [ 0.145977] pci 0000:00:14.0: calling force_disable_hpet_msi+0x0/0x20 [ 0.145977] pci 0000:00:14.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.145977] pci 0000:00:14.3: found [1002:439d] class 000601 header type 00 [ 0.145977] pci 0000:00:14.3: calling quirk_no_ata_d3+0x0/0x22 [ 0.145977] pci 0000:00:14.3: calling quirk_resource_alignment+0x0/0x1bd [ 0.145977] pci 0000:00:14.4: found [1002:4384] class 000604 header type 01 [ 0.145977] pci 0000:00:14.4: calling quirk_no_ata_d3+0x0/0x22 [ 0.145977] pci 0000:00:14.4: calling quirk_resource_alignment+0x0/0x1bd [ 0.145977] pci 0000:00:14.5: found [1002:4399] class 000c03 header type 00 [ 0.145977] pci 0000:00:14.5: calling quirk_no_ata_d3+0x0/0x22 [ 0.145977] pci 0000:00:14.5: reg 10 32bit mmio: [0xf98fd000-0xf98fdfff] [ 0.145977] pci 0000:00:14.5: calling quirk_resource_alignment+0x0/0x1bd [ 0.145977] pci 0000:00:15.0: found [1002:43a0] class 000604 header type 01 [ 0.145977] pci 0000:00:15.0: calling quirk_no_ata_d3+0x0/0x22 [ 0.145977] pci 0000:00:15.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.145977] pci 0000:00:15.0: supports D1 D2 [ 0.145977] pci 0000:00:16.0: found [1002:4397] class 000c03 header type 00 [ 0.145977] pci 0000:00:16.0: calling quirk_no_ata_d3+0x0/0x22 [ 0.145977] pci 0000:00:16.0: reg 10 32bit mmio: [0xf98fe000-0xf98fefff] [ 0.145977] pci 0000:00:16.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.145999] pci 0000:00:16.2: found [1002:4396] class 000c03 header type 00 [ 0.146025] pci 0000:00:16.2: calling quirk_no_ata_d3+0x0/0x22 [ 0.146039] pci 0000:00:16.2: reg 10 32bit mmio: [0xf98ffc00-0xf98ffcff] [ 0.146091] pci 0000:00:16.2: calling quirk_resource_alignment+0x0/0x1bd [ 0.146123] pci 0000:00:16.2: supports D1 D2 [ 0.146126] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.146134] pci 0000:00:16.2: PME# disabled [ 0.146196] pci 0000:00:18.0: found [1022:1200] class 000600 header type 00 [ 0.146238] pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.146267] pci 0000:00:18.1: found [1022:1201] class 000600 header type 00 [ 0.146308] pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x1bd [ 0.146323] pci 0000:00:18.2: found [1022:1202] class 000600 header type 00 [ 0.146364] pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x1bd [ 0.146383] pci 0000:00:18.3: found [1022:1203] class 000600 header type 00 [ 0.146424] pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x1bd [ 0.146453] pci 0000:00:18.4: found [1022:1204] class 000600 header type 00 [ 0.146494] pci 0000:00:18.4: calling quirk_resource_alignment+0x0/0x1bd [ 0.146520] PCI: Fixups for bus 0000:00 [ 0.146525] pci 0000:00:02.0: scanning behind bridge, config 0b0b00, pass 0 [ 0.146531] PCI: Scanning bus 0000:0b [ 0.146555] pci 0000:0b:00.0: found [10de:06e4] class 000300 header type 00 [ 0.146581] pci 0000:0b:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.146598] pci 0000:0b:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.146615] pci 0000:0b:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] [ 0.146625] pci 0000:0b:00.0: reg 24 io port: [0xe800-0xe87f] [ 0.146635] pci 0000:0b:00.0: reg 30 32bit mmio pref: [0xfe9e0000-0xfe9fffff] [ 0.146642] pci 0000:0b:00.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.146752] PCI: Fixups for bus 0000:0b [ 0.146761] pci 0000:00:02.0: bridge io port: [0xe000-0xefff] [ 0.146767] pci 0000:00:02.0: bridge 32bit mmio: [0xfa000000-0xfe9fffff] [ 0.146775] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.146778] PCI: Bus scan for 0000:0b returning with max=0b [ 0.146784] pci 0000:00:03.0: scanning behind bridge, config 0a0a00, pass 0 [ 0.146791] PCI: Scanning bus 0000:0a [ 0.146820] pci 0000:0a:00.0: found [9710:9990] class 000c03 header type 00 [ 0.146855] pci 0000:0a:00.0: reg 10 32bit mmio: [0xf9ff8000-0xf9ff8fff] [ 0.146919] pci 0000:0a:00.0: calling quirk_netmos+0x0/0xe5 [ 0.146922] pci 0000:0a:00.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.146974] pci 0000:0a:00.0: supports D1 D2 [ 0.146977] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot [ 0.146977] pci 0000:0a:00.0: PME# disabled [ 0.146977] pci 0000:0a:00.1: found [9710:9990] class 000c03 header type 00 [ 0.146977] pci 0000:0a:00.1: reg 10 32bit mmio: [0xf9ff9000-0xf9ff9fff] [ 0.146977] pci 0000:0a:00.1: calling quirk_netmos+0x0/0xe5 [ 0.146977] pci 0000:0a:00.1: calling quirk_resource_alignment+0x0/0x1bd [ 0.146977] pci 0000:0a:00.1: supports D1 D2 [ 0.146977] pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot [ 0.146977] pci 0000:0a:00.1: PME# disabled [ 0.146977] pci 0000:0a:00.2: found [9710:9990] class 000c03 header type 00 [ 0.146977] pci 0000:0a:00.2: reg 10 32bit mmio: [0xf9ffa000-0xf9ffafff] [ 0.146977] pci 0000:0a:00.2: calling quirk_netmos+0x0/0xe5 [ 0.146977] pci 0000:0a:00.2: calling quirk_resource_alignment+0x0/0x1bd [ 0.146977] pci 0000:0a:00.2: supports D1 D2 [ 0.146977] pci 0000:0a:00.2: PME# supported from D0 D1 D2 D3hot [ 0.146977] pci 0000:0a:00.2: PME# disabled [ 0.146977] pci 0000:0a:00.3: found [9710:9990] class 000c03 header type 00 [ 0.146977] pci 0000:0a:00.3: reg 10 32bit mmio: [0xf9ffb000-0xf9ffbfff] [ 0.146977] pci 0000:0a:00.3: calling quirk_netmos+0x0/0xe5 [ 0.146977] pci 0000:0a:00.3: calling quirk_resource_alignment+0x0/0x1bd [ 0.146977] pci 0000:0a:00.3: supports D1 D2 [ 0.146977] pci 0000:0a:00.3: PME# supported from D0 D1 D2 D3hot [ 0.146977] pci 0000:0a:00.3: PME# disabled [ 0.146977] pci 0000:0a:00.4: found [9710:9990] class 000c03 header type 00 [ 0.146977] pci 0000:0a:00.4: reg 10 32bit mmio: [0xf9ffc000-0xf9ffcfff] [ 0.146977] pci 0000:0a:00.4: calling quirk_netmos+0x0/0xe5 [ 0.146977] pci 0000:0a:00.4: calling quirk_resource_alignment+0x0/0x1bd [ 0.146977] pci 0000:0a:00.4: supports D1 D2 [ 0.146977] pci 0000:0a:00.4: PME# supported from D0 D1 D2 D3hot [ 0.146977] pci 0000:0a:00.4: PME# disabled [ 0.146977] pci 0000:0a:00.5: found [9710:9990] class 000c03 header type 00 [ 0.146977] pci 0000:0a:00.5: reg 10 32bit mmio: [0xf9ffd000-0xf9ffdfff] [ 0.146977] pci 0000:0a:00.5: calling quirk_netmos+0x0/0xe5 [ 0.146977] pci 0000:0a:00.5: calling quirk_resource_alignment+0x0/0x1bd [ 0.146977] pci 0000:0a:00.5: supports D1 D2 [ 0.146977] pci 0000:0a:00.5: PME# supported from D0 D1 D2 D3hot [ 0.146977] pci 0000:0a:00.5: PME# disabled [ 0.146977] pci 0000:0a:00.6: found [9710:9990] class 000c03 header type 00 [ 0.146977] pci 0000:0a:00.6: reg 10 32bit mmio: [0xf9ffe000-0xf9ffefff] [ 0.146977] pci 0000:0a:00.6: calling quirk_netmos+0x0/0xe5 [ 0.146977] pci 0000:0a:00.6: calling quirk_resource_alignment+0x0/0x1bd [ 0.146977] pci 0000:0a:00.6: supports D1 D2 [ 0.146977] pci 0000:0a:00.6: PME# supported from D0 D1 D2 D3hot [ 0.146977] pci 0000:0a:00.6: PME# disabled [ 0.146977] pci 0000:0a:00.7: found [9710:9990] class 000c03 header type 00 [ 0.146977] pci 0000:0a:00.7: reg 10 32bit mmio: [0xf9fff000-0xf9ffffff] [ 0.146977] pci 0000:0a:00.7: calling quirk_netmos+0x0/0xe5 [ 0.146977] pci 0000:0a:00.7: calling quirk_resource_alignment+0x0/0x1bd [ 0.146977] pci 0000:0a:00.7: supports D1 D2 [ 0.146977] pci 0000:0a:00.7: PME# supported from D0 D1 D2 D3hot [ 0.146977] pci 0000:0a:00.7: PME# disabled [ 0.146977] PCI: Fixups for bus 0000:0a [ 0.146977] pci 0000:00:03.0: bridge 32bit mmio: [0xf9f00000-0xf9ffffff] [ 0.146977] PCI: Bus scan for 0000:0a returning with max=0a [ 0.146977] pci 0000:00:05.0: scanning behind bridge, config 090900, pass 0 [ 0.146977] PCI: Scanning bus 0000:09 [ 0.146977] pci 0000:09:00.0: found [10ec:8168] class 000200 header type 00 [ 0.146977] pci 0000:09:00.0: reg 10 io port: [0xd800-0xd8ff] [ 0.146977] pci 0000:09:00.0: reg 18 64bit mmio pref: [0xcffff000-0xcfffffff] [ 0.146977] pci 0000:09:00.0: reg 20 64bit mmio pref: [0xcfff8000-0xcfffbfff] [ 0.146977] pci 0000:09:00.0: reg 30 32bit mmio pref: [0xf9ee0000-0xf9efffff] [ 0.146977] pci 0000:09:00.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.146977] pci 0000:09:00.0: supports D1 D2 [ 0.146977] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.146977] pci 0000:09:00.0: PME# disabled [ 0.146977] PCI: Fixups for bus 0000:09 [ 0.146977] pci 0000:00:05.0: bridge io port: [0xd000-0xdfff] [ 0.146977] pci 0000:00:05.0: bridge 32bit mmio: [0xf9e00000-0xf9efffff] [ 0.146977] pci 0000:00:05.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff] [ 0.146977] PCI: Bus scan for 0000:09 returning with max=09 [ 0.146977] pci 0000:00:06.0: scanning behind bridge, config 080800, pass 0 [ 0.146977] PCI: Scanning bus 0000:08 [ 0.147004] pci 0000:08:00.0: found [10ec:8168] class 000200 header type 00 [ 0.147035] pci 0000:08:00.0: reg 10 io port: [0xc800-0xc8ff] [ 0.147089] pci 0000:08:00.0: reg 18 64bit mmio pref: [0xcfeff000-0xcfefffff] [ 0.147108] pci 0000:08:00.0: reg 20 64bit mmio pref: [0xcfef8000-0xcfefbfff] [ 0.147119] pci 0000:08:00.0: reg 30 32bit mmio pref: [0xf9de0000-0xf9dfffff] [ 0.147127] pci 0000:08:00.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.147176] pci 0000:08:00.0: supports D1 D2 [ 0.147179] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.147187] pci 0000:08:00.0: PME# disabled [ 0.147275] PCI: Fixups for bus 0000:08 [ 0.147284] pci 0000:00:06.0: bridge io port: [0xc000-0xcfff] [ 0.147291] pci 0000:00:06.0: bridge 32bit mmio: [0xf9d00000-0xf9dfffff] [ 0.147299] pci 0000:00:06.0: bridge 64bit mmio pref: [0xcfe00000-0xcfefffff] [ 0.147302] PCI: Bus scan for 0000:08 returning with max=08 [ 0.147308] pci 0000:00:0a.0: scanning behind bridge, config 070600, pass 0 [ 0.147315] PCI: Scanning bus 0000:06 [ 0.147348] pci 0000:06:00.0: found [104c:8231] class 000604 header type 01 [ 0.147425] pci 0000:06:00.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.147480] pci 0000:06:00.0: supports D1 D2 [ 0.147564] PCI: Fixups for bus 0000:06 [ 0.147576] pci 0000:00:0a.0: bridge 32bit mmio: [0xf9c00000-0xf9cfffff] [ 0.147589] pci 0000:06:00.0: scanning behind bridge, config 070706, pass 0 [ 0.147597] PCI: Scanning bus 0000:07 [ 0.147622] pci 0000:07:01.0: found [1033:0035] class 000c03 header type 00 [ 0.147660] pci 0000:07:01.0: reg 10 32bit mmio: [0xf9cfd000-0xf9cfdfff] [ 0.147729] pci 0000:07:01.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.147762] pci 0000:07:01.0: supports D1 D2 [ 0.147765] pci 0000:07:01.0: PME# supported from D0 D1 D2 D3hot [ 0.147774] pci 0000:07:01.0: PME# disabled [ 0.147807] pci 0000:07:01.1: found [1033:0035] class 000c03 header type 00 [ 0.147853] pci 0000:07:01.1: reg 10 32bit mmio: [0xf9cfe000-0xf9cfefff] [ 0.147922] pci 0000:07:01.1: calling quirk_resource_alignment+0x0/0x1bd [ 0.147955] pci 0000:07:01.1: supports D1 D2 [ 0.147958] pci 0000:07:01.1: PME# supported from D0 D1 D2 D3hot [ 0.147967] pci 0000:07:01.1: PME# disabled [ 0.147977] pci 0000:07:01.2: found [1033:00e0] class 000c03 header type 00 [ 0.147977] pci 0000:07:01.2: reg 10 32bit mmio: [0xf9cffc00-0xf9cffcff] [ 0.147977] pci 0000:07:01.2: calling quirk_resource_alignment+0x0/0x1bd [ 0.147977] pci 0000:07:01.2: supports D1 D2 [ 0.147977] pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot [ 0.147977] pci 0000:07:01.2: PME# disabled [ 0.147977] PCI: Fixups for bus 0000:07 [ 0.147977] pci 0000:06:00.0: bridge 32bit mmio: [0xf9c00000-0xf9cfffff] [ 0.147977] PCI: Bus scan for 0000:07 returning with max=07 [ 0.147977] pci 0000:06:00.0: scanning behind bridge, config 070706, pass 1 [ 0.147977] PCI: Bus scan for 0000:06 returning with max=07 [ 0.147977] pci 0000:00:0b.0: scanning behind bridge, config 050500, pass 0 [ 0.147977] PCI: Scanning bus 0000:05 [ 0.147977] pci 0000:05:00.0: found [1002:95c5] class 000300 header type 00 [ 0.147977] pci 0000:05:00.0: calling quirk_no_ata_d3+0x0/0x22 [ 0.147977] pci 0000:05:00.0: reg 10 64bit mmio pref: [0xb0000000-0xbfffffff] [ 0.147977] pci 0000:05:00.0: reg 18 64bit mmio: [0xf9be0000-0xf9beffff] [ 0.147977] pci 0000:05:00.0: reg 20 io port: [0xb000-0xb0ff] [ 0.147977] pci 0000:05:00.0: reg 30 32bit mmio pref: [0xf9bc0000-0xf9bdffff] [ 0.147977] pci 0000:05:00.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.147977] pci 0000:05:00.0: supports D1 D2 [ 0.147977] pci 0000:05:00.1: found [1002:aa28] class 000403 header type 00 [ 0.147977] pci 0000:05:00.1: calling quirk_no_ata_d3+0x0/0x22 [ 0.147977] pci 0000:05:00.1: reg 10 64bit mmio: [0xf9bfc000-0xf9bfffff] [ 0.147977] pci 0000:05:00.1: calling quirk_resource_alignment+0x0/0x1bd [ 0.147977] pci 0000:05:00.1: supports D1 D2 [ 0.147977] PCI: Fixups for bus 0000:05 [ 0.147977] pci 0000:00:0b.0: bridge io port: [0xb000-0xbfff] [ 0.147977] pci 0000:00:0b.0: bridge 32bit mmio: [0xf9b00000-0xf9bfffff] [ 0.147977] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xb0000000-0xbfffffff] [ 0.147977] PCI: Bus scan for 0000:05 returning with max=05 [ 0.147977] pci 0000:00:0d.0: scanning behind bridge, config 040400, pass 0 [ 0.147977] PCI: Scanning bus 0000:04 [ 0.147977] pci 0000:04:00.0: found [9710:9990] class 000c03 header type 00 [ 0.147977] pci 0000:04:00.0: reg 10 32bit mmio: [0xf9af8000-0xf9af8fff] [ 0.147977] pci 0000:04:00.0: calling quirk_netmos+0x0/0xe5 [ 0.147977] pci 0000:04:00.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.147977] pci 0000:04:00.0: supports D1 D2 [ 0.147977] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot [ 0.147977] pci 0000:04:00.0: PME# disabled [ 0.147977] pci 0000:04:00.1: found [9710:9990] class 000c03 header type 00 [ 0.147977] pci 0000:04:00.1: reg 10 32bit mmio: [0xf9af9000-0xf9af9fff] [ 0.147977] pci 0000:04:00.1: calling quirk_netmos+0x0/0xe5 [ 0.147977] pci 0000:04:00.1: calling quirk_resource_alignment+0x0/0x1bd [ 0.147977] pci 0000:04:00.1: supports D1 D2 [ 0.147977] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot [ 0.147977] pci 0000:04:00.1: PME# disabled [ 0.147977] pci 0000:04:00.2: found [9710:9990] class 000c03 header type 00 [ 0.147977] pci 0000:04:00.2: reg 10 32bit mmio: [0xf9afa000-0xf9afafff] [ 0.147977] pci 0000:04:00.2: calling quirk_netmos+0x0/0xe5 [ 0.147977] pci 0000:04:00.2: calling quirk_resource_alignment+0x0/0x1bd [ 0.147977] pci 0000:04:00.2: supports D1 D2 [ 0.147977] pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot [ 0.147977] pci 0000:04:00.2: PME# disabled [ 0.147977] pci 0000:04:00.3: found [9710:9990] class 000c03 header type 00 [ 0.147977] pci 0000:04:00.3: reg 10 32bit mmio: [0xf9afb000-0xf9afbfff] [ 0.147977] pci 0000:04:00.3: calling quirk_netmos+0x0/0xe5 [ 0.147977] pci 0000:04:00.3: calling quirk_resource_alignment+0x0/0x1bd [ 0.147977] pci 0000:04:00.3: supports D1 D2 [ 0.147977] pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot [ 0.147977] pci 0000:04:00.3: PME# disabled [ 0.147977] pci 0000:04:00.4: found [9710:9990] class 000c03 header type 00 [ 0.147977] pci 0000:04:00.4: reg 10 32bit mmio: [0xf9afc000-0xf9afcfff] [ 0.147977] pci 0000:04:00.4: calling quirk_netmos+0x0/0xe5 [ 0.147977] pci 0000:04:00.4: calling quirk_resource_alignment+0x0/0x1bd [ 0.147977] pci 0000:04:00.4: supports D1 D2 [ 0.147977] pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot [ 0.147977] pci 0000:04:00.4: PME# disabled [ 0.147977] pci 0000:04:00.5: found [9710:9990] class 000c03 header type 00 [ 0.147977] pci 0000:04:00.5: reg 10 32bit mmio: [0xf9afd000-0xf9afdfff] [ 0.147977] pci 0000:04:00.5: calling quirk_netmos+0x0/0xe5 [ 0.147977] pci 0000:04:00.5: calling quirk_resource_alignment+0x0/0x1bd [ 0.147977] pci 0000:04:00.5: supports D1 D2 [ 0.147977] pci 0000:04:00.5: PME# supported from D0 D1 D2 D3hot [ 0.147977] pci 0000:04:00.5: PME# disabled [ 0.147977] pci 0000:04:00.6: found [9710:9990] class 000c03 header type 00 [ 0.147977] pci 0000:04:00.6: reg 10 32bit mmio: [0xf9afe000-0xf9afefff] [ 0.147977] pci 0000:04:00.6: calling quirk_netmos+0x0/0xe5 [ 0.147977] pci 0000:04:00.6: calling quirk_resource_alignment+0x0/0x1bd [ 0.147977] pci 0000:04:00.6: supports D1 D2 [ 0.147977] pci 0000:04:00.6: PME# supported from D0 D1 D2 D3hot [ 0.147977] pci 0000:04:00.6: PME# disabled [ 0.147977] pci 0000:04:00.7: found [9710:9990] class 000c03 header type 00 [ 0.147977] pci 0000:04:00.7: reg 10 32bit mmio: [0xf9aff000-0xf9afffff] [ 0.147977] pci 0000:04:00.7: calling quirk_netmos+0x0/0xe5 [ 0.147977] pci 0000:04:00.7: calling quirk_resource_alignment+0x0/0x1bd [ 0.147977] pci 0000:04:00.7: supports D1 D2 [ 0.147977] pci 0000:04:00.7: PME# supported from D0 D1 D2 D3hot [ 0.147977] pci 0000:04:00.7: PME# disabled [ 0.147977] PCI: Fixups for bus 0000:04 [ 0.147977] pci 0000:00:0d.0: bridge 32bit mmio: [0xf9a00000-0xf9afffff] [ 0.147977] PCI: Bus scan for 0000:04 returning with max=04 [ 0.147977] pci 0000:00:14.4: scanning behind bridge, config 030300, pass 0 [ 0.147977] PCI: Scanning bus 0000:03 [ 0.147977] pci 0000:03:06.0: found [13f6:0111] class 000401 header type 00 [ 0.147977] pci 0000:03:06.0: reg 10 io port: [0xa800-0xa8ff] [ 0.147977] pci 0000:03:06.0: calling quirk_resource_alignment+0x0/0x1bd [ 0.147977] pci 0000:03:06.0: supports D1 D2 [ 0.147977] PCI: Fixups for bus 0000:03 [ 0.147977] pci 0000:00:14.4: transparent bridge [ 0.147977] pci 0000:00:14.4: bridge io port: [0xa000-0xafff] [ 0.147977] PCI: Bus scan for 0000:03 returning with max=03 [ 0.147977] pci 0000:00:15.0: scanning behind bridge, config 020200, pass 0 [ 0.147977] PCI: Scanning bus 0000:02 [ 0.147977] PCI: Fixups for bus 0000:02 [ 0.147977] PCI: Bus scan for 0000:02 returning with max=02 [ 0.147977] pci 0000:00:02.0: scanning behind bridge, config 0b0b00, pass 1 [ 0.147977] pci 0000:00:03.0: scanning behind bridge, config 0a0a00, pass 1 [ 0.147977] pci 0000:00:05.0: scanning behind bridge, config 090900, pass 1 [ 0.147977] pci 0000:00:06.0: scanning behind bridge, config 080800, pass 1 [ 0.147977] pci 0000:00:0a.0: scanning behind bridge, config 070600, pass 1 [ 0.147977] pci 0000:00:0b.0: scanning behind bridge, config 050500, pass 1 [ 0.147977] pci 0000:00:0d.0: scanning behind bridge, config 040400, pass 1 [ 0.147977] pci 0000:00:14.4: scanning behind bridge, config 030300, pass 1 [ 0.147977] pci 0000:00:15.0: scanning behind bridge, config 020200, pass 1 [ 0.147977] PCI: Bus scan for 0000:00 returning with max=0b [ 0.147977] pci_bus 0000:00: on NUMA node 0 [ 0.147977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.148196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT] [ 0.148268] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC03._PRT] [ 0.148372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT] [ 0.148442] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC06._PRT] [ 0.148526] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0A._PRT] [ 0.148596] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0B._PRT] [ 0.148673] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0D._PRT] [ 0.148765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.148899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT] [ 0.177104] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15) [ 0.177308] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15) [ 0.177522] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15) [ 0.178003] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15) [ 0.178214] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 14 15) [ 0.178351] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15) [ 0.178488] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15) [ 0.178629] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 14 15) [ 0.179003] xen_balloon: Initialising balloon driver with page order 0. [ 0.179093] last_pfn = 0x2b0000 max_arch_pfn = 0x400000000 [ 0.202059] vgaarb: device added: PCI:0000:0b:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.202080] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=none,locks=none [ 0.202104] vgaarb: loaded [ 0.202997] SCSI subsystem initialized [ 0.203021] libata version 3.00 loaded. [ 0.204002] usbcore: registered new interface driver usbfs [ 0.204011] usbcore: registered new interface driver hub [ 0.204011] usbcore: registered new device driver usb [ 0.204031] PCI: Using ACPI for IRQ routing [ 0.205385] NetLabel: Initializing [ 0.205385] NetLabel: domain hash size = 128 [ 0.205385] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.205385] NetLabel: unlabeled traffic allowed by default [ 0.206375] Switching to clocksource xen [ 0.221922] pnp: PnP ACPI init [ 0.221943] ACPI: bus type pnp registered [ 0.223852] xen: registering gsi 8 triggering 1 polarity 0 [ 0.223857] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.223862] xen: --> irq=8 [ 0.224462] xen: registering gsi 13 triggering 1 polarity 0 [ 0.224466] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.224471] xen: --> irq=13 [ 0.225313] xen: registering gsi 4 triggering 1 polarity 0 [ 0.225317] xen_allocate_pirq: returning irq 4 for gsi 4 [ 0.225321] xen: --> irq=4 [ 0.225325] Already setup the GSI :4 [ 0.229430] pnp: PnP ACPI: found 14 devices [ 0.229436] ACPI: ACPI bus type pnp unregistered [ 0.229461] system 00:01: iomem range 0xfec20000-0xfec200ff could not be reserved [ 0.229483] system 00:02: iomem range 0xf6000000-0xf6003fff has been reserved [ 0.229496] system 00:08: ioport range 0x600-0x6df has been reserved [ 0.229501] system 00:08: ioport range 0xae0-0xaef has been reserved [ 0.229513] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.229519] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.229530] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved [ 0.229535] system 00:0b: ioport range 0x40b-0x40b has been reserved [ 0.229540] system 00:0b: ioport range 0x4d6-0x4d6 has been reserved [ 0.229545] system 00:0b: ioport range 0xc00-0xc01 has been reserved [ 0.229550] system 00:0b: ioport range 0xc14-0xc14 has been reserved [ 0.229555] system 00:0b: ioport range 0xc50-0xc51 has been reserved [ 0.229560] system 00:0b: ioport range 0xc52-0xc52 has been reserved [ 0.229565] system 00:0b: ioport range 0xc6c-0xc6c has been reserved [ 0.229569] system 00:0b: ioport range 0xc6f-0xc6f has been reserved [ 0.229574] system 00:0b: ioport range 0xcd0-0xcd1 has been reserved [ 0.229579] system 00:0b: ioport range 0xcd2-0xcd3 has been reserved [ 0.229584] system 00:0b: ioport range 0xcd4-0xcd5 has been reserved [ 0.229589] system 00:0b: ioport range 0xcd6-0xcd7 has been reserved [ 0.229594] system 00:0b: ioport range 0xcd8-0xcdf has been reserved [ 0.229607] system 00:0b: ioport range 0x800-0x89f has been reserved [ 0.229612] system 00:0b: ioport range 0xb00-0xb1f has been reserved [ 0.229617] system 00:0b: ioport range 0xb20-0xb3f has been reserved [ 0.229622] system 00:0b: ioport range 0x900-0x90f has been reserved [ 0.229627] system 00:0b: ioport range 0x910-0x91f has been reserved [ 0.229632] system 00:0b: ioport range 0xfe00-0xfefe has been reserved [ 0.229637] system 00:0b: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.229643] system 00:0b: iomem range 0xfec10000-0xfec1001f has been reserved [ 0.229648] system 00:0b: iomem range 0xfed80000-0xfed80fff has been reserved [ 0.229659] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.229670] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.229676] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved [ 0.229681] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 0.229686] system 00:0d: iomem range 0x100000-0xafffffff could not be reserved [ 0.229692] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.229979] pciback: wants to seize 0000:03:06.0 [ 0.229984] pciback: wants to seize 0000:04:00.0 [ 0.229988] pciback: wants to seize 0000:04:00.1 [ 0.229992] pciback: wants to seize 0000:04:00.2 [ 0.229995] pciback: wants to seize 0000:04:00.3 [ 0.229999] pciback: wants to seize 0000:04:00.4 [ 0.230002] pciback: wants to seize 0000:04:00.5 [ 0.230006] pciback: wants to seize 0000:04:00.6 [ 0.230009] pciback: wants to seize 0000:04:00.7 [ 0.230013] pciback: wants to seize 0000:0a:00.0 [ 0.230017] pciback: wants to seize 0000:0a:00.1 [ 0.230020] pciback: wants to seize 0000:0a:00.2 [ 0.230024] pciback: wants to seize 0000:0a:00.3 [ 0.230027] pciback: wants to seize 0000:0a:00.4 [ 0.230031] pciback: wants to seize 0000:0a:00.5 [ 0.230035] pciback: wants to seize 0000:0a:00.6 [ 0.230039] pciback: wants to seize 0000:0a:00.7 [ 0.230042] pciback: wants to seize 0000:05:00.0 [ 0.230046] pciback: wants to seize 0000:05:00.1 [ 0.230078] pciback 0000:00:00.0: probing... [ 0.230098] pciback 0000:00:00.2: probing... [ 0.230112] pciback 0000:00:02.0: probing... [ 0.230125] pciback 0000:00:03.0: probing... [ 0.230139] pciback 0000:00:05.0: probing... [ 0.230156] pciback 0000:00:06.0: probing... [ 0.230169] pciback 0000:00:0a.0: probing... [ 0.230182] pciback 0000:00:0b.0: probing... [ 0.230195] pciback 0000:00:0d.0: probing... [ 0.230211] pciback 0000:00:11.0: probing... [ 0.230225] pciback 0000:00:12.0: probing... [ 0.230237] pciback 0000:00:12.2: probing... [ 0.230251] pciback 0000:00:13.0: probing... [ 0.230267] pciback 0000:00:13.2: probing... [ 0.230286] pciback 0000:00:14.0: probing... [ 0.230301] pciback 0000:00:14.3: probing... [ 0.230313] pciback 0000:00:14.4: probing... [ 0.230326] pciback 0000:00:14.5: probing... [ 0.230340] pciback 0000:00:15.0: probing... [ 0.230361] pciback 0000:00:16.0: probing... [ 0.230379] pciback 0000:00:16.2: probing... [ 0.230397] pciback 0000:00:18.0: probing... [ 0.230419] pciback 0000:00:18.1: probing... [ 0.230439] pciback 0000:00:18.2: probing... [ 0.230460] pciback 0000:00:18.3: probing... [ 0.230486] pciback 0000:00:18.4: probing... [ 0.230501] pciback 0000:0b:00.0: probing... [ 0.230514] pciback 0000:0a:00.0: probing... [ 0.230517] pciback 0000:0a:00.0: seizing device [ 0.230522] pciback 0000:0a:00.0: pcistub_device_alloc [ 0.230527] pciback 0000:0a:00.0: deferring initialization [ 0.230541] pciback 0000:0a:00.1: probing... [ 0.230544] pciback 0000:0a:00.1: seizing device [ 0.230548] pciback 0000:0a:00.1: pcistub_device_alloc [ 0.230552] pciback 0000:0a:00.1: deferring initialization [ 0.230561] pciback 0000:0a:00.2: probing... [ 0.230564] pciback 0000:0a:00.2: seizing device [ 0.230568] pciback 0000:0a:00.2: pcistub_device_alloc [ 0.230572] pciback 0000:0a:00.2: deferring initialization [ 0.230581] pciback 0000:0a:00.3: probing... [ 0.230585] pciback 0000:0a:00.3: seizing device [ 0.230588] pciback 0000:0a:00.3: pcistub_device_alloc [ 0.230592] pciback 0000:0a:00.3: deferring initialization [ 0.230601] pciback 0000:0a:00.4: probing... [ 0.230604] pciback 0000:0a:00.4: seizing device [ 0.230608] pciback 0000:0a:00.4: pcistub_device_alloc [ 0.230612] pciback 0000:0a:00.4: deferring initialization [ 0.230622] pciback 0000:0a:00.5: probing... [ 0.230625] pciback 0000:0a:00.5: seizing device [ 0.230629] pciback 0000:0a:00.5: pcistub_device_alloc [ 0.230632] pciback 0000:0a:00.5: deferring initialization [ 0.230641] pciback 0000:0a:00.6: probing... [ 0.230645] pciback 0000:0a:00.6: seizing device [ 0.230649] pciback 0000:0a:00.6: pcistub_device_alloc [ 0.230652] pciback 0000:0a:00.6: deferring initialization [ 0.230662] pciback 0000:0a:00.7: probing... [ 0.230666] pciback 0000:0a:00.7: seizing device [ 0.230670] pciback 0000:0a:00.7: pcistub_device_alloc [ 0.230674] pciback 0000:0a:00.7: deferring initialization [ 0.230686] pciback 0000:09:00.0: probing... [ 0.230699] pciback 0000:08:00.0: probing... [ 0.230712] pciback 0000:06:00.0: probing... [ 0.230725] pciback 0000:07:01.0: probing... [ 0.230738] pciback 0000:07:01.1: probing... [ 0.230750] pciback 0000:07:01.2: probing... [ 0.230763] pciback 0000:05:00.0: probing... [ 0.230766] pciback 0000:05:00.0: seizing device [ 0.230770] pciback 0000:05:00.0: pcistub_device_alloc [ 0.230773] pciback 0000:05:00.0: deferring initialization [ 0.230783] pciback 0000:05:00.1: probing... [ 0.230786] pciback 0000:05:00.1: seizing device [ 0.230790] pciback 0000:05:00.1: pcistub_device_alloc [ 0.230793] pciback 0000:05:00.1: deferring initialization [ 0.230804] pciback 0000:04:00.0: probing... [ 0.230807] pciback 0000:04:00.0: seizing device [ 0.230811] pciback 0000:04:00.0: pcistub_device_alloc [ 0.230814] pciback 0000:04:00.0: deferring initialization [ 0.230824] pciback 0000:04:00.1: probing... [ 0.230827] pciback 0000:04:00.1: seizing device [ 0.230831] pciback 0000:04:00.1: pcistub_device_alloc [ 0.230860] pciback 0000:04:00.1: deferring initialization [ 0.230869] pciback 0000:04:00.2: probing... [ 0.230872] pciback 0000:04:00.2: seizing device [ 0.230876] pciback 0000:04:00.2: pcistub_device_alloc [ 0.230878] pciback 0000:04:00.2: deferring initialization [ 0.230887] pciback 0000:04:00.3: probing... [ 0.230890] pciback 0000:04:00.3: seizing device [ 0.230894] pciback 0000:04:00.3: pcistub_device_alloc [ 0.230897] pciback 0000:04:00.3: deferring initialization [ 0.230907] pciback 0000:04:00.4: probing... [ 0.230910] pciback 0000:04:00.4: seizing device [ 0.230914] pciback 0000:04:00.4: pcistub_device_alloc [ 0.230917] pciback 0000:04:00.4: deferring initialization [ 0.230926] pciback 0000:04:00.5: probing... [ 0.230929] pciback 0000:04:00.5: seizing device [ 0.230932] pciback 0000:04:00.5: pcistub_device_alloc [ 0.230935] pciback 0000:04:00.5: deferring initialization [ 0.230944] pciback 0000:04:00.6: probing... [ 0.230947] pciback 0000:04:00.6: seizing device [ 0.230950] pciback 0000:04:00.6: pcistub_device_alloc [ 0.230953] pciback 0000:04:00.6: deferring initialization [ 0.230962] pciback 0000:04:00.7: probing... [ 0.230965] pciback 0000:04:00.7: seizing device [ 0.230968] pciback 0000:04:00.7: pcistub_device_alloc [ 0.230971] pciback 0000:04:00.7: deferring initialization [ 0.230981] pciback 0000:03:06.0: probing... [ 0.230983] pciback 0000:03:06.0: seizing device [ 0.230987] pciback 0000:03:06.0: pcistub_device_alloc [ 0.230990] pciback 0000:03:06.0: deferring initialization [ 0.234748] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.234916] pci 0000:00:02.0: PCI bridge, secondary bus 0000:0b [ 0.234922] pci 0000:00:02.0: IO window: 0xe000-0xefff [ 0.234930] pci 0000:00:02.0: MEM window: 0xfa000000-0xfe9fffff [ 0.234937] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.234947] pci 0000:00:03.0: PCI bridge, secondary bus 0000:0a [ 0.234951] pci 0000:00:03.0: IO window: disabled [ 0.234958] pci 0000:00:03.0: MEM window: 0xf9f00000-0xf9ffffff [ 0.234965] pci 0000:00:03.0: PREFETCH window: disabled [ 0.234974] pci 0000:00:05.0: PCI bridge, secondary bus 0000:09 [ 0.234979] pci 0000:00:05.0: IO window: 0xd000-0xdfff [ 0.234987] pci 0000:00:05.0: MEM window: 0xf9e00000-0xf9efffff [ 0.234993] pci 0000:00:05.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff [ 0.235003] pci 0000:00:06.0: PCI bridge, secondary bus 0000:08 [ 0.235008] pci 0000:00:06.0: IO window: 0xc000-0xcfff [ 0.235016] pci 0000:00:06.0: MEM window: 0xf9d00000-0xf9dfffff [ 0.235022] pci 0000:00:06.0: PREFETCH window: 0x000000cfe00000-0x000000cfefffff [ 0.235032] pci 0000:06:00.0: PCI bridge, secondary bus 0000:07 [ 0.235036] pci 0000:06:00.0: IO window: disabled [ 0.235046] pci 0000:06:00.0: MEM window: 0xf9c00000-0xf9cfffff [ 0.235054] pci 0000:06:00.0: PREFETCH window: disabled [ 0.235066] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:06 [ 0.235070] pci 0000:00:0a.0: IO window: disabled [ 0.235080] pci 0000:00:0a.0: MEM window: 0xf9c00000-0xf9cfffff [ 0.235088] pci 0000:00:0a.0: PREFETCH window: disabled [ 0.235097] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:05 [ 0.235102] pci 0000:00:0b.0: IO window: 0xb000-0xbfff [ 0.235110] pci 0000:00:0b.0: MEM window: 0xf9b00000-0xf9bfffff [ 0.235116] pci 0000:00:0b.0: PREFETCH window: 0x000000b0000000-0x000000bfffffff [ 0.235126] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04 [ 0.235130] pci 0000:00:0d.0: IO window: disabled [ 0.235137] pci 0000:00:0d.0: MEM window: 0xf9a00000-0xf9afffff [ 0.235144] pci 0000:00:0d.0: PREFETCH window: disabled [ 0.235153] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 [ 0.235161] pci 0000:00:14.4: IO window: 0xa000-0xafff [ 0.235170] pci 0000:00:14.4: MEM window: disabled [ 0.235177] pci 0000:00:14.4: PREFETCH window: disabled [ 0.235187] pci 0000:00:15.0: PCI bridge, secondary bus 0000:02 [ 0.235191] pci 0000:00:15.0: IO window: disabled [ 0.235199] pci 0000:00:15.0: MEM window: disabled [ 0.235206] pci 0000:00:15.0: PREFETCH window: disabled [ 0.235232] xen: registering gsi 52 triggering 0 polarity 1 [ 0.235247] alloc irq_desc for 52 on node 0 [ 0.235251] alloc kstat_irqs on node 0 [ 0.235258] xen: --> irq=52 [ 0.235279] pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 [ 0.235288] pci 0000:00:02.0: setting latency timer to 64 [ 0.235300] xen: registering gsi 52 triggering 0 polarity 1 [ 0.235304] xen_allocate_pirq: returning irq 52 for gsi 52 [ 0.235307] xen: --> irq=52 [ 0.235310] Already setup the GSI :52 [ 0.235314] pci 0000:00:03.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 [ 0.235320] pci 0000:00:03.0: setting latency timer to 64 [ 0.235332] xen: registering gsi 52 triggering 0 polarity 1 [ 0.235335] xen_allocate_pirq: returning irq 52 for gsi 52 [ 0.235338] xen: --> irq=52 [ 0.235341] Already setup the GSI :52 [ 0.235345] pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 [ 0.235351] pci 0000:00:05.0: setting latency timer to 64 [ 0.235363] xen: registering gsi 53 triggering 0 polarity 1 [ 0.235368] alloc irq_desc for 53 on node 0 [ 0.235371] alloc kstat_irqs on node 0 [ 0.235375] xen: --> irq=53 [ 0.235389] pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 0.235397] pci 0000:00:06.0: setting latency timer to 64 [ 0.235409] xen: registering gsi 54 triggering 0 polarity 1 [ 0.235414] alloc irq_desc for 54 on node 0 [ 0.235417] alloc kstat_irqs on node 0 [ 0.235421] xen: --> irq=54 [ 0.235435] pci 0000:00:0a.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 [ 0.235443] pci 0000:00:0a.0: setting latency timer to 64 [ 0.235461] pci 0000:06:00.0: setting latency timer to 64 [ 0.235469] xen: registering gsi 54 triggering 0 polarity 1 [ 0.235469] xen_allocate_pirq: returning irq 54 for gsi 54 [ 0.235469] xen: --> irq=54 [ 0.235489] Already setup the GSI :54 [ 0.235492] pci 0000:00:0b.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 [ 0.235499] pci 0000:00:0b.0: setting latency timer to 64 [ 0.235511] xen: registering gsi 54 triggering 0 polarity 1 [ 0.235514] xen_allocate_pirq: returning irq 54 for gsi 54 [ 0.235517] xen: --> irq=54 [ 0.235520] Already setup the GSI :54 [ 0.235524] pci 0000:00:0d.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 [ 0.235530] pci 0000:00:0d.0: setting latency timer to 64 [ 0.235553] xen: registering gsi 16 triggering 0 polarity 1 [ 0.235558] alloc irq_desc for 16 on node 0 [ 0.235561] alloc kstat_irqs on node 0 [ 0.235565] xen: --> irq=16 [ 0.235580] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.235588] pci 0000:00:15.0: setting latency timer to 64 [ 0.235594] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.235597] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.235600] pci_bus 0000:0b: resource 0 io: [0xe000-0xefff] [ 0.235603] pci_bus 0000:0b: resource 1 mem: [0xfa000000-0xfe9fffff] [ 0.235606] pci_bus 0000:0b: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.235609] pci_bus 0000:0a: resource 1 mem: [0xf9f00000-0xf9ffffff] [ 0.235612] pci_bus 0000:09: resource 0 io: [0xd000-0xdfff] [ 0.235615] pci_bus 0000:09: resource 1 mem: [0xf9e00000-0xf9efffff] [ 0.235618] pci_bus 0000:09: resource 2 pref mem [0xcff00000-0xcfffffff] [ 0.235621] pci_bus 0000:08: resource 0 io: [0xc000-0xcfff] [ 0.235624] pci_bus 0000:08: resource 1 mem: [0xf9d00000-0xf9dfffff] [ 0.235627] pci_bus 0000:08: resource 2 pref mem [0xcfe00000-0xcfefffff] [ 0.235630] pci_bus 0000:06: resource 1 mem: [0xf9c00000-0xf9cfffff] [ 0.235633] pci_bus 0000:07: resource 1 mem: [0xf9c00000-0xf9cfffff] [ 0.235636] pci_bus 0000:05: resource 0 io: [0xb000-0xbfff] [ 0.235638] pci_bus 0000:05: resource 1 mem: [0xf9b00000-0xf9bfffff] [ 0.235641] pci_bus 0000:05: resource 2 pref mem [0xb0000000-0xbfffffff] [ 0.235644] pci_bus 0000:04: resource 1 mem: [0xf9a00000-0xf9afffff] [ 0.235647] pci_bus 0000:03: resource 0 io: [0xa000-0xafff] [ 0.235650] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.235653] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.235674] NET: Registered protocol family 2 [ 0.235718] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.236300] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.237309] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.237572] TCP: Hash tables configured (established 262144 bind 65536) [ 0.237577] TCP reno registered [ 0.237674] NET: Registered protocol family 1 [ 0.238180] RPC: Registered udp transport module. [ 0.238185] RPC: Registered tcp transport module. [ 0.238189] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.238203] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238209] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x699 [ 0.238214] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xd1 [ 0.238219] pci 0000:00:00.2: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238223] pci 0000:00:00.2: calling quirk_usb_early_handoff+0x0/0x699 [ 0.238228] pci 0000:00:00.2: calling pci_fixup_video+0x0/0xd1 [ 0.238235] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238239] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x699 [ 0.238243] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xd1 [ 0.238252] pci 0000:00:03.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238256] pci 0000:00:03.0: calling quirk_usb_early_handoff+0x0/0x699 [ 0.238262] pci 0000:00:03.0: calling pci_fixup_video+0x0/0xd1 [ 0.238267] pci 0000:00:05.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238271] pci 0000:00:05.0: calling quirk_usb_early_handoff+0x0/0x699 [ 0.238275] pci 0000:00:05.0: calling pci_fixup_video+0x0/0xd1 [ 0.238280] pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238283] pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0x699 [ 0.238287] pci 0000:00:06.0: calling pci_fixup_video+0x0/0xd1 [ 0.238292] pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238296] pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0x699 [ 0.238299] pci 0000:00:0a.0: calling pci_fixup_video+0x0/0xd1 [ 0.238305] pci 0000:00:0b.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238308] pci 0000:00:0b.0: calling quirk_usb_early_handoff+0x0/0x699 [ 0.238312] pci 0000:00:0b.0: calling pci_fixup_video+0x0/0xd1 [ 0.238317] pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238320] pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0x699 [ 0.238324] pci 0000:00:0d.0: calling pci_fixup_video+0x0/0xd1 [ 0.238329] pci 0000:00:11.0: calling quirk_msi_intx_disable_ati_bug+0x0/0x4c [ 0.238339] pci 0000:00:11.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238343] pci 0000:00:11.0: calling quirk_usb_early_handoff+0x0/0x699 [ 0.238346] pci 0000:00:11.0: calling pci_fixup_video+0x0/0xd1 [ 0.238352] pci 0000:00:12.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238355] pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x699 [ 0.997137] pci 0000:00:12.0: calling pci_fixup_video+0x0/0xd1 [ 0.997150] pci 0000:00:12.2: calling quirk_cardbus_legacy+0x0/0x30 [ 0.997154] pci 0000:00:12.2: calling quirk_usb_early_handoff+0x0/0x699 [ 0.997195] pci 0000:00:12.2: calling pci_fixup_video+0x0/0xd1 [ 0.997201] pci 0000:00:13.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.997204] pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x699 [ 1.018162] pci 0000:00:13.0: calling pci_fixup_video+0x0/0xd1 [ 1.018171] pci 0000:00:13.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.018175] pci 0000:00:13.2: calling quirk_usb_early_handoff+0x0/0x699 [ 1.018208] pci 0000:00:13.2: calling pci_fixup_video+0x0/0xd1 [ 1.018214] pci 0000:00:14.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.018217] pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x699 [ 1.018221] pci 0000:00:14.0: calling pci_fixup_video+0x0/0xd1 [ 1.018226] pci 0000:00:14.3: calling quirk_cardbus_legacy+0x0/0x30 [ 1.018230] pci 0000:00:14.3: calling quirk_usb_early_handoff+0x0/0x699 [ 1.018234] pci 0000:00:14.3: calling pci_fixup_video+0x0/0xd1 [ 1.018239] pci 0000:00:14.4: calling quirk_cardbus_legacy+0x0/0x30 [ 1.018243] pci 0000:00:14.4: calling quirk_usb_early_handoff+0x0/0x699 [ 1.018247] pci 0000:00:14.4: calling pci_fixup_video+0x0/0xd1 [ 1.018252] pci 0000:00:14.5: calling quirk_cardbus_legacy+0x0/0x30 [ 1.018256] pci 0000:00:14.5: calling quirk_usb_early_handoff+0x0/0x699 [ 1.039142] pci 0000:00:14.5: calling pci_fixup_video+0x0/0xd1 [ 1.039151] pci 0000:00:15.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.039155] pci 0000:00:15.0: calling quirk_usb_early_handoff+0x0/0x699 [ 1.039158] pci 0000:00:15.0: calling pci_fixup_video+0x0/0xd1 [ 1.039163] pci 0000:00:16.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.039167] pci 0000:00:16.0: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060110] pci 0000:00:16.0: calling pci_fixup_video+0x0/0xd1 [ 1.060119] pci 0000:00:16.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060123] pci 0000:00:16.2: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060154] pci 0000:00:16.2: calling pci_fixup_video+0x0/0xd1 [ 1.060160] pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060164] pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060168] pci 0000:00:18.0: calling pci_fixup_video+0x0/0xd1 [ 1.060177] pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060181] pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060185] pci 0000:00:18.1: calling pci_fixup_video+0x0/0xd1 [ 1.060190] pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060194] pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060197] pci 0000:00:18.2: calling pci_fixup_video+0x0/0xd1 [ 1.060202] pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060206] pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060210] pci 0000:00:18.3: calling pci_fixup_video+0x0/0xd1 [ 1.060215] pci 0000:00:18.4: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060219] pci 0000:00:18.4: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060223] pci 0000:00:18.4: calling pci_fixup_video+0x0/0xd1 [ 1.060228] pci 0000:0b:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12 [ 1.060249] pci 0000:0b:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060252] pci 0000:0b:00.0: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060256] pci 0000:0b:00.0: calling pci_fixup_video+0x0/0xd1 [ 1.060263] pci 0000:0b:00.0: Boot video device [ 1.060268] pciback 0000:0a:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060272] pciback 0000:0a:00.0: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060292] pciback 0000:0a:00.0: calling pci_fixup_video+0x0/0xd1 [ 1.060298] pciback 0000:0a:00.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060302] pciback 0000:0a:00.1: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060324] pciback 0000:0a:00.1: calling pci_fixup_video+0x0/0xd1 [ 1.060333] pciback 0000:0a:00.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060343] pciback 0000:0a:00.2: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060362] pciback 0000:0a:00.2: calling pci_fixup_video+0x0/0xd1 [ 1.060367] pciback 0000:0a:00.3: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060370] pciback 0000:0a:00.3: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060391] pciback 0000:0a:00.3: calling pci_fixup_video+0x0/0xd1 [ 1.060396] pciback 0000:0a:00.4: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060400] pciback 0000:0a:00.4: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060418] pciback 0000:0a:00.4: calling pci_fixup_video+0x0/0xd1 [ 1.060423] pciback 0000:0a:00.5: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060426] pciback 0000:0a:00.5: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060447] pciback 0000:0a:00.5: calling pci_fixup_video+0x0/0xd1 [ 1.060453] pciback 0000:0a:00.6: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060456] pciback 0000:0a:00.6: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060485] pciback 0000:0a:00.6: calling pci_fixup_video+0x0/0xd1 [ 1.060492] pciback 0000:0a:00.7: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060497] pciback 0000:0a:00.7: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060521] pciback 0000:0a:00.7: calling pci_fixup_video+0x0/0xd1 [ 1.060526] pci 0000:09:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060530] pci 0000:09:00.0: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060533] pci 0000:09:00.0: calling pci_fixup_video+0x0/0xd1 [ 1.060538] pci 0000:08:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060541] pci 0000:08:00.0: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060544] pci 0000:08:00.0: calling pci_fixup_video+0x0/0xd1 [ 1.060549] pci 0000:06:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060552] pci 0000:06:00.0: calling quirk_xio2000a+0x0/0xa3 [ 1.060555] pci 0000:06:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled [ 1.060570] pci 0000:06:00.0: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060573] pci 0000:06:00.0: calling pci_fixup_video+0x0/0xd1 [ 1.060578] pci 0000:07:01.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060581] pci 0000:07:01.0: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060599] pci 0000:07:01.0: calling pci_fixup_video+0x0/0xd1 [ 1.060604] pci 0000:07:01.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060608] pci 0000:07:01.1: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060626] pci 0000:07:01.1: calling pci_fixup_video+0x0/0xd1 [ 1.060631] pci 0000:07:01.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060634] pci 0000:07:01.2: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060660] pci 0000:07:01.2: calling pci_fixup_video+0x0/0xd1 [ 1.060669] pciback 0000:05:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060673] pciback 0000:05:00.0: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060676] pciback 0000:05:00.0: calling pci_fixup_video+0x0/0xd1 [ 1.060683] pciback 0000:05:00.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060686] pciback 0000:05:00.1: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060690] pciback 0000:05:00.1: calling pci_fixup_video+0x0/0xd1 [ 1.060694] pciback 0000:04:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060698] pciback 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060715] pciback 0000:04:00.0: calling pci_fixup_video+0x0/0xd1 [ 1.060721] pciback 0000:04:00.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060724] pciback 0000:04:00.1: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060744] pciback 0000:04:00.1: calling pci_fixup_video+0x0/0xd1 [ 1.060755] pciback 0000:04:00.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060758] pciback 0000:04:00.2: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060778] pciback 0000:04:00.2: calling pci_fixup_video+0x0/0xd1 [ 1.060783] pciback 0000:04:00.3: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060786] pciback 0000:04:00.3: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060910] pciback 0000:04:00.3: calling pci_fixup_video+0x0/0xd1 [ 1.060915] pciback 0000:04:00.4: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060918] pciback 0000:04:00.4: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060936] pciback 0000:04:00.4: calling pci_fixup_video+0x0/0xd1 [ 1.060942] pciback 0000:04:00.5: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060945] pciback 0000:04:00.5: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060966] pciback 0000:04:00.5: calling pci_fixup_video+0x0/0xd1 [ 1.060971] pciback 0000:04:00.6: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060974] pciback 0000:04:00.6: calling quirk_usb_early_handoff+0x0/0x699 [ 1.060992] pciback 0000:04:00.6: calling pci_fixup_video+0x0/0xd1 [ 1.060998] pciback 0000:04:00.7: calling quirk_cardbus_legacy+0x0/0x30 [ 1.061001] pciback 0000:04:00.7: calling quirk_usb_early_handoff+0x0/0x699 [ 1.061021] pciback 0000:04:00.7: calling pci_fixup_video+0x0/0xd1 [ 1.061027] pciback 0000:03:06.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.061030] pciback 0000:03:06.0: calling quirk_usb_early_handoff+0x0/0x699 [ 1.061033] pciback 0000:03:06.0: calling pci_fixup_video+0x0/0xd1 [ 1.061110] Trying to unpack rootfs image as initramfs... [ 1.069603] Freeing initrd memory: 9003k freed [ 1.072157] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.072165] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 1.072170] DMA: software IO TLB at phys 0x20000000 - 0x24000000 [ 1.072319] kvm: no hardware support [ 1.072328] has_svm: svm not available [ 1.072331] kvm: no hardware support [ 1.077179] Scanning for low memory corruption every 60 seconds [ 1.077626] audit: initializing netlink socket (disabled) [ 1.077644] type=2000 audit(1292177416.827:1): initialized [ 1.078224] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.084587] VFS: Disk quotas dquot_6.5.2 [ 1.084756] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.088483] Btrfs loaded [ 1.088495] msgmni has been set to 1111 [ 1.088648] SELinux: Registering netfilter hooks [ 1.090152] alg: No test for stdrng (krng) [ 1.090431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.090439] io scheduler noop registered [ 1.090443] io scheduler anticipatory registered [ 1.090447] io scheduler deadline registered [ 1.090576] io scheduler cfq registered (default) [ 1.091063] alloc irq_desc for 1753 on node 0 [ 1.091066] alloc kstat_irqs on node 0 [ 1.091107] pcieport 0000:00:02.0: setting latency timer to 64 [ 1.091456] alloc irq_desc for 1752 on node 0 [ 1.091459] alloc kstat_irqs on node 0 [ 1.091495] pcieport 0000:00:03.0: setting latency timer to 64 [ 1.091980] alloc irq_desc for 1751 on node 0 [ 1.091983] alloc kstat_irqs on node 0 [ 1.092013] pcieport 0000:00:05.0: setting latency timer to 64 [ 1.092284] alloc irq_desc for 1750 on node 0 [ 1.092287] alloc kstat_irqs on node 0 [ 1.092312] pcieport 0000:00:06.0: setting latency timer to 64 [ 1.092610] alloc irq_desc for 1749 on node 0 [ 1.092613] alloc kstat_irqs on node 0 [ 1.092636] pcieport 0000:00:0a.0: setting latency timer to 64 [ 1.093047] alloc irq_desc for 1748 on node 0 [ 1.093051] alloc kstat_irqs on node 0 [ 1.093083] pcieport 0000:00:0b.0: setting latency timer to 64 [ 1.093405] alloc irq_desc for 1747 on node 0 [ 1.093408] alloc kstat_irqs on node 0 [ 1.093433] pcieport 0000:00:0d.0: setting latency timer to 64 [ 1.093874] alloc irq_desc for 1746 on node 0 [ 1.093877] alloc kstat_irqs on node 0 [ 1.093914] pcieport 0000:00:15.0: setting latency timer to 64 [ 1.094401] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.094660] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.097666] vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90010100000, using 10240k, total 14336k [ 1.097671] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 1.097675] vesafb: scrolling: redraw [ 1.097679] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.119590] Console: switching to colour frame buffer device 160x64 [ 1.140469] fb0: VESA VGA frame buffer device [ 1.141431] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.141649] ACPI: Power Button [PWRB] [ 1.141927] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.142113] ACPI: Power Button [PWRF] [ 1.143424] ACPI: CPU-1 (power states: C1[C1] C2[C2]) [ 1.143714] ACPI: CPU-1 (power states: C1[C1] C2[C2]) [ 1.143990] ACPI: CPU-1 (power states: C1[C1] C2[C2]) [ 1.144285] ACPI: CPU-1 (power states: C1[C1] C2[C2]) [ 1.144548] ACPI: CPU-1 (power states: C1[C1] C2[C2]) [ 1.144871] ACPI: CPU-1 (power states: C1[C1] C2[C2]) [ 1.148257] Event-channel device installed. [ 1.148583] pciback: pcistub_init_devices_late [ 1.148590] pciback 0000:03:06.0: initializing... [ 1.148596] pciback 0000:03:06.0: initializing config [ 1.148599] pciback 0000:03:06.0: initializing virtual configuration space [ 1.148604] pciback 0000:03:06.0: added config field at offset 0x00 [ 1.148609] pciback 0000:03:06.0: added config field at offset 0x02 [ 1.148612] pciback 0000:03:06.0: added config field at offset 0x04 [ 1.148616] pciback 0000:03:06.0: added config field at offset 0x3c [ 1.148621] pciback 0000:03:06.0: added config field at offset 0x3d [ 1.148624] pciback 0000:03:06.0: added config field at offset 0x0c [ 1.148628] pciback 0000:03:06.0: added config field at offset 0x0d [ 1.148633] pciback 0000:03:06.0: added config field at offset 0x0f [ 1.148638] pciback 0000:03:06.0: added config field at offset 0x10 [ 1.148643] pciback 0000:03:06.0: added config field at offset 0x14 [ 1.148648] pciback 0000:03:06.0: added config field at offset 0x18 [ 1.148653] pciback 0000:03:06.0: added config field at offset 0x1c [ 1.148659] pciback 0000:03:06.0: added config field at offset 0x20 [ 1.148665] pciback 0000:03:06.0: added config field at offset 0x24 [ 1.148671] pciback 0000:03:06.0: added config field at offset 0x30 [ 1.148696] pciback 0000:03:06.0: Found capability 0x1 at 0xc0 [ 1.148699] pciback 0000:03:06.0: added config field at offset 0xc0 [ 1.148702] pciback 0000:03:06.0: added config field at offset 0xc2 [ 1.148708] pciback 0000:03:06.0: added config field at offset 0xc4 [ 1.148711] pciback 0000:03:06.0: added config field at offset 0xc6 [ 1.148714] pciback 0000:03:06.0: added config field at offset 0xc7 [ 1.148718] pciback 0000:03:06.0: enabling device [ 1.148738] xen: registering gsi 22 triggering 0 polarity 1 [ 1.148748] alloc irq_desc for 22 on node 0 [ 1.148751] alloc kstat_irqs on node 0 [ 1.148756] xen: --> irq=22 [ 1.148784] pciback 0000:03:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.148955] pciback 0000:03:06.0: reset device [ 1.148968] pciback 0000:03:06.0: PCI INT A disabled [ 1.149103] pciback 0000:04:00.7: initializing... [ 1.149108] pciback 0000:04:00.7: initializing config [ 1.149113] pciback 0000:04:00.7: initializing virtual configuration space [ 1.149117] pciback 0000:04:00.7: added config field at offset 0x00 [ 1.149120] pciback 0000:04:00.7: added config field at offset 0x02 [ 1.149123] pciback 0000:04:00.7: added config field at offset 0x04 [ 1.149129] pciback 0000:04:00.7: added config field at offset 0x3c [ 1.149133] pciback 0000:04:00.7: added config field at offset 0x3d [ 1.149136] pciback 0000:04:00.7: added config field at offset 0x0c [ 1.149139] pciback 0000:04:00.7: added config field at offset 0x0d [ 1.149142] pciback 0000:04:00.7: added config field at offset 0x0f [ 1.149146] pciback 0000:04:00.7: added config field at offset 0x10 [ 1.149150] pciback 0000:04:00.7: added config field at offset 0x14 [ 1.149153] pciback 0000:04:00.7: added config field at offset 0x18 [ 1.149156] pciback 0000:04:00.7: added config field at offset 0x1c [ 1.149160] pciback 0000:04:00.7: added config field at offset 0x20 [ 1.149164] pciback 0000:04:00.7: added config field at offset 0x24 [ 1.149169] pciback 0000:04:00.7: added config field at offset 0x30 [ 1.149208] pciback 0000:04:00.7: Found capability 0x1 at 0x78 [ 1.149211] pciback 0000:04:00.7: added config field at offset 0x78 [ 1.149214] pciback 0000:04:00.7: added config field at offset 0x7a [ 1.149220] pciback 0000:04:00.7: added config field at offset 0x7c [ 1.149226] pciback 0000:04:00.7: added config field at offset 0x7e [ 1.149232] pciback 0000:04:00.7: added config field at offset 0x7f [ 1.149237] pciback 0000:04:00.7: enabling device [ 1.149254] xen: registering gsi 43 triggering 0 polarity 1 [ 1.149260] alloc irq_desc for 43 on node 0 [ 1.149263] alloc kstat_irqs on node 0 [ 1.149268] xen: --> irq=43 [ 1.149285] pciback 0000:04:00.7: PCI INT D -> GSI 43 (level, low) -> IRQ 43 [ 1.149458] pciback 0000:04:00.7: reset device [ 1.149467] pciback 0000:04:00.7: PCI INT D disabled [ 1.149569] pciback 0000:04:00.6: initializing... [ 1.149569] pciback 0000:04:00.6: initializing config [ 1.149569] pciback 0000:04:00.6: initializing virtual configuration space [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x00 [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x02 [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x04 [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x3c [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x3d [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x0c [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x0d [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x0f [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x10 [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x14 [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x18 [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x1c [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x20 [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x24 [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x30 [ 1.149569] pciback 0000:04:00.6: Found capability 0x1 at 0x78 [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x78 [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x7a [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x7c [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x7e [ 1.149569] pciback 0000:04:00.6: added config field at offset 0x7f [ 1.149569] pciback 0000:04:00.6: enabling device [ 1.149569] xen: registering gsi 43 triggering 0 polarity 1 [ 1.149569] xen_allocate_pirq: returning irq 43 for gsi 43 [ 1.149569] xen: --> irq=43 [ 1.149846] Already setup the GSI :43 [ 1.149935] pciback 0000:04:00.6: PCI INT D -> GSI 43 (level, low) -> IRQ 43 [ 1.150105] pciback 0000:04:00.6: reset device [ 1.150115] pciback 0000:04:00.6: PCI INT D disabled [ 1.150244] pciback 0000:04:00.5: initializing... [ 1.150247] pciback 0000:04:00.5: initializing config [ 1.150250] pciback 0000:04:00.5: initializing virtual configuration space [ 1.150253] pciback 0000:04:00.5: added config field at offset 0x00 [ 1.150257] pciback 0000:04:00.5: added config field at offset 0x02 [ 1.150262] pciback 0000:04:00.5: added config field at offset 0x04 [ 1.150269] pciback 0000:04:00.5: added config field at offset 0x3c [ 1.150273] pciback 0000:04:00.5: added config field at offset 0x3d [ 1.150277] pciback 0000:04:00.5: added config field at offset 0x0c [ 1.150283] pciback 0000:04:00.5: added config field at offset 0x0d [ 1.150287] pciback 0000:04:00.5: added config field at offset 0x0f [ 1.150291] pciback 0000:04:00.5: added config field at offset 0x10 [ 1.150296] pciback 0000:04:00.5: added config field at offset 0x14 [ 1.150308] pciback 0000:04:00.5: added config field at offset 0x18 [ 1.150314] pciback 0000:04:00.5: added config field at offset 0x1c [ 1.150317] pciback 0000:04:00.5: added config field at offset 0x20 [ 1.150320] pciback 0000:04:00.5: added config field at offset 0x24 [ 1.150324] pciback 0000:04:00.5: added config field at offset 0x30 [ 1.150366] pciback 0000:04:00.5: Found capability 0x1 at 0x78 [ 1.150372] pciback 0000:04:00.5: added config field at offset 0x78 [ 1.150375] pciback 0000:04:00.5: added config field at offset 0x7a [ 1.150381] pciback 0000:04:00.5: added config field at offset 0x7c [ 1.150384] pciback 0000:04:00.5: added config field at offset 0x7e [ 1.150388] pciback 0000:04:00.5: added config field at offset 0x7f [ 1.150391] pciback 0000:04:00.5: enabling device [ 1.150404] xen: registering gsi 42 triggering 0 polarity 1 [ 1.150411] alloc irq_desc for 42 on node 0 [ 1.150413] alloc kstat_irqs on node 0 [ 1.150418] xen: --> irq=42 [ 1.150435] pciback 0000:04:00.5: PCI INT C -> GSI 42 (level, low) -> IRQ 42 [ 1.150606] pciback 0000:04:00.5: reset device [ 1.150614] pciback 0000:04:00.5: PCI INT C disabled [ 1.150741] pciback 0000:04:00.4: initializing... [ 1.150744] pciback 0000:04:00.4: initializing config [ 1.150747] pciback 0000:04:00.4: initializing virtual configuration space [ 1.150750] pciback 0000:04:00.4: added config field at offset 0x00 [ 1.150753] pciback 0000:04:00.4: added config field at offset 0x02 [ 1.150755] pciback 0000:04:00.4: added config field at offset 0x04 [ 1.150758] pciback 0000:04:00.4: added config field at offset 0x3c [ 1.150760] pciback 0000:04:00.4: added config field at offset 0x3d [ 1.150763] pciback 0000:04:00.4: added config field at offset 0x0c [ 1.150766] pciback 0000:04:00.4: added config field at offset 0x0d [ 1.150769] pciback 0000:04:00.4: added config field at offset 0x0f [ 1.150772] pciback 0000:04:00.4: added config field at offset 0x10 [ 1.150774] pciback 0000:04:00.4: added config field at offset 0x14 [ 1.150777] pciback 0000:04:00.4: added config field at offset 0x18 [ 1.150779] pciback 0000:04:00.4: added config field at offset 0x1c [ 1.150782] pciback 0000:04:00.4: added config field at offset 0x20 [ 1.150785] pciback 0000:04:00.4: added config field at offset 0x24 [ 1.150787] pciback 0000:04:00.4: added config field at offset 0x30 [ 1.150818] pciback 0000:04:00.4: Found capability 0x1 at 0x78 [ 1.150821] pciback 0000:04:00.4: added config field at offset 0x78 [ 1.150824] pciback 0000:04:00.4: added config field at offset 0x7a [ 1.150829] pciback 0000:04:00.4: added config field at offset 0x7c [ 1.150831] pciback 0000:04:00.4: added config field at offset 0x7e [ 1.150834] pciback 0000:04:00.4: added config field at offset 0x7f [ 1.150836] pciback 0000:04:00.4: enabling device [ 1.150841] xen: registering gsi 42 triggering 0 polarity 1 [ 1.150841] xen_allocate_pirq: returning irq 42 for gsi 42 [ 1.150841] xen: --> irq=42 [ 1.150992] Already setup the GSI :42 [ 1.151081] pciback 0000:04:00.4: PCI INT C -> GSI 42 (level, low) -> IRQ 42 [ 1.151251] pciback 0000:04:00.4: reset device [ 1.151259] pciback 0000:04:00.4: PCI INT C disabled [ 1.151387] pciback 0000:04:00.3: initializing... [ 1.151390] pciback 0000:04:00.3: initializing config [ 1.151393] pciback 0000:04:00.3: initializing virtual configuration space [ 1.151396] pciback 0000:04:00.3: added config field at offset 0x00 [ 1.151399] pciback 0000:04:00.3: added config field at offset 0x02 [ 1.151403] pciback 0000:04:00.3: added config field at offset 0x04 [ 1.151406] pciback 0000:04:00.3: added config field at offset 0x3c [ 1.151409] pciback 0000:04:00.3: added config field at offset 0x3d [ 1.151412] pciback 0000:04:00.3: added config field at offset 0x0c [ 1.151415] pciback 0000:04:00.3: added config field at offset 0x0d [ 1.151418] pciback 0000:04:00.3: added config field at offset 0x0f [ 1.151421] pciback 0000:04:00.3: added config field at offset 0x10 [ 1.151425] pciback 0000:04:00.3: added config field at offset 0x14 [ 1.151428] pciback 0000:04:00.3: added config field at offset 0x18 [ 1.151432] pciback 0000:04:00.3: added config field at offset 0x1c [ 1.151435] pciback 0000:04:00.3: added config field at offset 0x20 [ 1.151438] pciback 0000:04:00.3: added config field at offset 0x24 [ 1.151442] pciback 0000:04:00.3: added config field at offset 0x30 [ 1.151477] pciback 0000:04:00.3: Found capability 0x1 at 0x78 [ 1.151481] pciback 0000:04:00.3: added config field at offset 0x78 [ 1.151484] pciback 0000:04:00.3: added config field at offset 0x7a [ 1.151489] pciback 0000:04:00.3: added config field at offset 0x7c [ 1.151492] pciback 0000:04:00.3: added config field at offset 0x7e [ 1.151495] pciback 0000:04:00.3: added config field at offset 0x7f [ 1.151500] pciback 0000:04:00.3: enabling device [ 1.151513] xen: registering gsi 41 triggering 0 polarity 1 [ 1.151518] alloc irq_desc for 41 on node 0 [ 1.151521] alloc kstat_irqs on node 0 [ 1.151530] xen: --> irq=41 [ 1.151545] pciback 0000:04:00.3: PCI INT B -> GSI 41 (level, low) -> IRQ 41 [ 1.151732] pciback 0000:04:00.3: reset device [ 1.151741] pciback 0000:04:00.3: PCI INT B disabled [ 1.151863] pciback 0000:04:00.2: initializing... [ 1.151866] pciback 0000:04:00.2: initializing config [ 1.151869] pciback 0000:04:00.2: initializing virtual configuration space [ 1.151872] pciback 0000:04:00.2: added config field at offset 0x00 [ 1.151875] pciback 0000:04:00.2: added config field at offset 0x02 [ 1.151878] pciback 0000:04:00.2: added config field at offset 0x04 [ 1.151881] pciback 0000:04:00.2: added config field at offset 0x3c [ 1.151883] pciback 0000:04:00.2: added config field at offset 0x3d [ 1.151886] pciback 0000:04:00.2: added config field at offset 0x0c [ 1.151889] pciback 0000:04:00.2: added config field at offset 0x0d [ 1.151892] pciback 0000:04:00.2: added config field at offset 0x0f [ 1.151895] pciback 0000:04:00.2: added config field at offset 0x10 [ 1.151898] pciback 0000:04:00.2: added config field at offset 0x14 [ 1.151901] pciback 0000:04:00.2: added config field at offset 0x18 [ 1.151904] pciback 0000:04:00.2: added config field at offset 0x1c [ 1.151907] pciback 0000:04:00.2: added config field at offset 0x20 [ 1.151910] pciback 0000:04:00.2: added config field at offset 0x24 [ 1.151913] pciback 0000:04:00.2: added config field at offset 0x30 [ 1.151945] pciback 0000:04:00.2: Found capability 0x1 at 0x78 [ 1.151948] pciback 0000:04:00.2: added config field at offset 0x78 [ 1.151951] pciback 0000:04:00.2: added config field at offset 0x7a [ 1.151956] pciback 0000:04:00.2: added config field at offset 0x7c [ 1.151959] pciback 0000:04:00.2: added config field at offset 0x7e [ 1.151962] pciback 0000:04:00.2: added config field at offset 0x7f [ 1.151965] pciback 0000:04:00.2: enabling device [ 1.151977] xen: registering gsi 41 triggering 0 polarity 1 [ 1.151980] xen_allocate_pirq: returning irq 41 for gsi 41 [ 1.152113] xen: --> irq=41 [ 1.152116] Already setup the GSI :41 [ 1.152205] pciback 0000:04:00.2: PCI INT B -> GSI 41 (level, low) -> IRQ 41 [ 1.152380] pciback 0000:04:00.2: reset device [ 1.152389] pciback 0000:04:00.2: PCI INT B disabled [ 1.152511] pciback 0000:04:00.1: initializing... [ 1.152514] pciback 0000:04:00.1: initializing config [ 1.152517] pciback 0000:04:00.1: initializing virtual configuration space [ 1.152520] pciback 0000:04:00.1: added config field at offset 0x00 [ 1.152523] pciback 0000:04:00.1: added config field at offset 0x02 [ 1.152526] pciback 0000:04:00.1: added config field at offset 0x04 [ 1.152526] pciback 0000:04:00.1: added config field at offset 0x3c [ 1.152526] pciback 0000:04:00.1: added config field at offset 0x3d [ 1.152526] pciback 0000:04:00.1: added config field at offset 0x0c [ 1.152526] pciback 0000:04:00.1: added config field at offset 0x0d [ 1.152526] pciback 0000:04:00.1: added config field at offset 0x0f [ 1.152526] pciback 0000:04:00.1: added config field at offset 0x10 [ 1.152526] pciback 0000:04:00.1: added config field at offset 0x14 [ 1.152526] pciback 0000:04:00.1: added config field at offset 0x18 [ 1.152526] pciback 0000:04:00.1: added config field at offset 0x1c [ 1.152526] pciback 0000:04:00.1: added config field at offset 0x20 [ 1.152526] pciback 0000:04:00.1: added config field at offset 0x24 [ 1.152526] pciback 0000:04:00.1: added config field at offset 0x30 [ 1.152526] pciback 0000:04:00.1: Found capability 0x1 at 0x78 [ 1.152526] pciback 0000:04:00.1: added config field at offset 0x78 [ 1.152526] pciback 0000:04:00.1: added config field at offset 0x7a [ 1.152526] pciback 0000:04:00.1: added config field at offset 0x7c [ 1.152526] pciback 0000:04:00.1: added config field at offset 0x7e [ 1.152526] pciback 0000:04:00.1: added config field at offset 0x7f [ 1.152526] pciback 0000:04:00.1: enabling device [ 1.152526] xen: registering gsi 40 triggering 0 polarity 1 [ 1.152526] alloc irq_desc for 40 on node 0 [ 1.152526] alloc kstat_irqs on node 0 [ 1.152648] xen: --> irq=40 [ 1.152664] pciback 0000:04:00.1: PCI INT A -> GSI 40 (level, low) -> IRQ 40 [ 1.152840] pciback 0000:04:00.1: reset device [ 1.152848] pciback 0000:04:00.1: PCI INT A disabled [ 1.153644] pciback 0000:04:00.0: initializing... [ 1.153644] pciback 0000:04:00.0: initializing config [ 1.153644] pciback 0000:04:00.0: initializing virtual configuration space [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x00 [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x02 [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x04 [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x3c [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x3d [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x0c [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x0d [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x0f [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x10 [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x14 [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x18 [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x1c [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x20 [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x24 [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x30 [ 1.153644] pciback 0000:04:00.0: Found capability 0x1 at 0x78 [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x78 [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x7a [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x7c [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x7e [ 1.153644] pciback 0000:04:00.0: added config field at offset 0x7f [ 1.153644] pciback 0000:04:00.0: enabling device [ 1.153644] xen: registering gsi 40 triggering 0 polarity 1 [ 1.153644] xen_allocate_pirq: returning irq 40 for gsi 40 [ 1.153644] xen: --> irq=40 [ 1.159460] Already setup the GSI :40 [ 1.160455] pciback 0000:04:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40 [ 1.160455] pciback 0000:04:00.0: reset device [ 1.160455] pciback 0000:04:00.0: PCI INT A disabled [ 1.160455] pciback 0000:05:00.1: initializing... [ 1.160455] pciback 0000:05:00.1: initializing config [ 1.160455] pciback 0000:05:00.1: initializing virtual configuration space [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x00 [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x02 [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x04 [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x3c [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x3d [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x0c [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x0d [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x0f [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x10 [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x14 [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x18 [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x1c [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x20 [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x24 [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x30 [ 1.160455] pciback 0000:05:00.1: Found capability 0x1 at 0x50 [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x50 [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x52 [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x54 [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x56 [ 1.160455] pciback 0000:05:00.1: added config field at offset 0x57 [ 1.160455] pciback 0000:05:00.1: enabling device [ 1.160455] xen: registering gsi 33 triggering 0 polarity 1 [ 1.160455] alloc irq_desc for 33 on node 0 [ 1.160455] alloc kstat_irqs on node 0 [ 1.169979] xen: --> irq=33 [ 1.170001] pciback 0000:05:00.1: PCI INT B -> GSI 33 (level, low) -> IRQ 33 [ 1.170975] pciback 0000:05:00.1: reset device [ 1.170975] pciback 0000:05:00.1: PCI INT B disabled [ 1.170975] pciback 0000:05:00.0: initializing... [ 1.170975] pciback 0000:05:00.0: initializing config [ 1.170975] pciback 0000:05:00.0: initializing virtual configuration space [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x00 [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x02 [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x04 [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x3c [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x3d [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x0c [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x0d [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x0f [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x10 [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x14 [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x18 [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x1c [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x20 [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x24 [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x30 [ 1.170975] pciback 0000:05:00.0: Found capability 0x1 at 0x50 [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x50 [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x52 [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x54 [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x56 [ 1.170975] pciback 0000:05:00.0: added config field at offset 0x57 [ 1.170975] pciback 0000:05:00.0: enabling device [ 1.170975] pciback 0000:05:00.0: enabling device (0000 -> 0003) [ 1.170975] xen: registering gsi 32 triggering 0 polarity 1 [ 1.170975] alloc irq_desc for 32 on node 0 [ 1.170975] alloc kstat_irqs on node 0 [ 1.181219] xen: --> irq=32 [ 1.181247] pciback 0000:05:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 [ 1.182215] pciback 0000:05:00.0: reset device [ 1.182215] pciback 0000:05:00.0: PCI INT A disabled [ 1.182215] pciback 0000:0a:00.7: initializing... [ 1.182215] pciback 0000:0a:00.7: initializing config [ 1.182215] pciback 0000:0a:00.7: initializing virtual configuration space [ 1.182215] pciback 0000:0a:00.7: added config field at offset 0x00 [ 1.182215] pciback 0000:0a:00.7: added config field at offset 0x02 [ 1.182215] pciback 0000:0a:00.7: added config field at offset 0x04 [ 1.182215] pciback 0000:0a:00.7: added config field at offset 0x3c [ 1.182215] pciback 0000:0a:00.7: added config field at offset 0x3d [ 1.182215] pciback 0000:0a:00.7: added config field at offset 0x0c [ 1.182215] pciback 0000:0a:00.7: added config field at offset 0x0d [ 1.182215] pciback 0000:0a:00.7: added config field at offset 0x0f [ 1.182215] pciback 0000:0a:00.7: added config field at offset 0x10 [ 1.182215] pciback 0000:0a:00.7: added config field at offset 0x14 [ 1.182215] pciback 0000:0a:00.7: added config field at offset 0x18 [ 1.182215] pciback 0000:0a:00.7: added config field at offset 0x1c [ 1.182215] pciback 0000:0a:00.7: added config field at offset 0x20 [ 1.182215] pciback 0000:0a:00.7: added config field at offset 0x24 [ 1.182215] pciback 0000:0a:00.7: added config field at offset 0x30 [ 1.182215] pciback 0000:0a:00.7: Found capability 0x1 at 0x78 [ 1.182215] pciback 0000:0a:00.7: added config field at offset 0x78 [ 1.182215] pciback 0000:0a:00.7: added config field at offset 0x7a [ 1.182215] pciback 0000:0a:00.7: added config field at offset 0x7c [ 1.189107] pciback 0000:0a:00.7: added config field at offset 0x7e [ 1.189110] pciback 0000:0a:00.7: added config field at offset 0x7f [ 1.189114] pciback 0000:0a:00.7: enabling device [ 1.189127] xen: registering gsi 31 triggering 0 polarity 1 [ 1.189132] alloc irq_desc for 31 on node 0 [ 1.189135] alloc kstat_irqs on node 0 [ 1.189139] xen: --> irq=31 [ 1.189157] pciback 0000:0a:00.7: PCI INT D -> GSI 31 (level, low) -> IRQ 31 [ 1.190100] pciback 0000:0a:00.7: reset device [ 1.190100] pciback 0000:0a:00.7: PCI INT D disabled [ 1.190100] pciback 0000:0a:00.6: initializing... [ 1.190100] pciback 0000:0a:00.6: initializing config [ 1.190100] pciback 0000:0a:00.6: initializing virtual configuration space [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x00 [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x02 [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x04 [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x3c [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x3d [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x0c [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x0d [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x0f [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x10 [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x14 [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x18 [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x1c [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x20 [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x24 [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x30 [ 1.190100] pciback 0000:0a:00.6: Found capability 0x1 at 0x78 [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x78 [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x7a [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x7c [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x7e [ 1.190100] pciback 0000:0a:00.6: added config field at offset 0x7f [ 1.190100] pciback 0000:0a:00.6: enabling device [ 1.190100] xen: registering gsi 31 triggering 0 polarity 1 [ 1.190100] xen_allocate_pirq: returning irq 31 for gsi 31 [ 1.190100] xen: --> irq=31 [ 1.201432] Already setup the GSI :31 [ 1.202428] pciback 0000:0a:00.6: PCI INT D -> GSI 31 (level, low) -> IRQ 31 [ 1.202428] pciback 0000:0a:00.6: reset device [ 1.202428] pciback 0000:0a:00.6: PCI INT D disabled [ 1.202428] pciback 0000:0a:00.5: initializing... [ 1.202428] pciback 0000:0a:00.5: initializing config [ 1.202428] pciback 0000:0a:00.5: initializing virtual configuration space [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x00 [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x02 [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x04 [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x3c [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x3d [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x0c [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x0d [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x0f [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x10 [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x14 [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x18 [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x1c [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x20 [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x24 [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x30 [ 1.202428] pciback 0000:0a:00.5: Found capability 0x1 at 0x78 [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x78 [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x7a [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x7c [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x7e [ 1.202428] pciback 0000:0a:00.5: added config field at offset 0x7f [ 1.202428] pciback 0000:0a:00.5: enabling device [ 1.202428] xen: registering gsi 30 triggering 0 polarity 1 [ 1.202428] alloc irq_desc for 30 on node 0 [ 1.202428] alloc kstat_irqs on node 0 [ 1.214430] xen: --> irq=30 [ 1.214445] pciback 0000:0a:00.5: PCI INT C -> GSI 30 (level, low) -> IRQ 30 [ 1.215425] pciback 0000:0a:00.5: reset device [ 1.215425] pciback 0000:0a:00.5: PCI INT C disabled [ 1.215425] pciback 0000:0a:00.4: initializing... [ 1.215425] pciback 0000:0a:00.4: initializing config [ 1.215425] pciback 0000:0a:00.4: initializing virtual configuration space [ 1.215425] pciback 0000:0a:00.4: added config field at offset 0x00 [ 1.215425] pciback 0000:0a:00.4: added config field at offset 0x02 [ 1.215425] pciback 0000:0a:00.4: added config field at offset 0x04 [ 1.215425] pciback 0000:0a:00.4: added config field at offset 0x3c [ 1.215425] pciback 0000:0a:00.4: added config field at offset 0x3d [ 1.215425] pciback 0000:0a:00.4: added config field at offset 0x0c [ 1.215425] pciback 0000:0a:00.4: added config field at offset 0x0d [ 1.215425] pciback 0000:0a:00.4: added config field at offset 0x0f [ 1.215425] pciback 0000:0a:00.4: added config field at offset 0x10 [ 1.215425] pciback 0000:0a:00.4: added config field at offset 0x14 [ 1.215425] pciback 0000:0a:00.4: added config field at offset 0x18 [ 1.215425] pciback 0000:0a:00.4: added config field at offset 0x1c [ 1.215425] pciback 0000:0a:00.4: added config field at offset 0x20 [ 1.215425] pciback 0000:0a:00.4: added config field at offset 0x24 [ 1.215425] pciback 0000:0a:00.4: added config field at offset 0x30 [ 1.215425] pciback 0000:0a:00.4: Found capability 0x1 at 0x78 [ 1.215425] pciback 0000:0a:00.4: added config field at offset 0x78 [ 1.223543] pciback 0000:0a:00.4: added config field at offset 0x7a [ 1.223549] pciback 0000:0a:00.4: added config field at offset 0x7c [ 1.223553] pciback 0000:0a:00.4: added config field at offset 0x7e [ 1.223556] pciback 0000:0a:00.4: added config field at offset 0x7f [ 1.223559] pciback 0000:0a:00.4: enabling device [ 1.223573] xen: registering gsi 30 triggering 0 polarity 1 [ 1.223576] xen_allocate_pirq: returning irq 30 for gsi 30 [ 1.224537] xen: --> irq=30 [ 1.228197] Already setup the GSI :30 [ 1.229193] pciback 0000:0a:00.4: PCI INT C -> GSI 30 (level, low) -> IRQ 30 [ 1.229193] pciback 0000:0a:00.4: reset device [ 1.229193] pciback 0000:0a:00.4: PCI INT C disabled [ 1.229193] pciback 0000:0a:00.3: initializing... [ 1.229193] pciback 0000:0a:00.3: initializing config [ 1.229193] pciback 0000:0a:00.3: initializing virtual configuration space [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x00 [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x02 [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x04 [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x3c [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x3d [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x0c [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x0d [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x0f [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x10 [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x14 [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x18 [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x1c [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x20 [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x24 [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x30 [ 1.229193] pciback 0000:0a:00.3: Found capability 0x1 at 0x78 [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x78 [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x7a [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x7c [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x7e [ 1.229193] pciback 0000:0a:00.3: added config field at offset 0x7f [ 1.229193] pciback 0000:0a:00.3: enabling device [ 1.229193] xen: registering gsi 29 triggering 0 polarity 1 [ 1.229193] alloc irq_desc for 29 on node 0 [ 1.229193] alloc kstat_irqs on node 0 [ 1.242654] xen: --> irq=29 [ 1.242670] pciback 0000:0a:00.3: PCI INT B -> GSI 29 (level, low) -> IRQ 29 [ 1.243650] pciback 0000:0a:00.3: reset device [ 1.243650] pciback 0000:0a:00.3: PCI INT B disabled [ 1.243650] pciback 0000:0a:00.2: initializing... [ 1.243650] pciback 0000:0a:00.2: initializing config [ 1.243650] pciback 0000:0a:00.2: initializing virtual configuration space [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x00 [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x02 [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x04 [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x3c [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x3d [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x0c [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x0d [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x0f [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x10 [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x14 [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x18 [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x1c [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x20 [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x24 [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x30 [ 1.243650] pciback 0000:0a:00.2: Found capability 0x1 at 0x78 [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x78 [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x7a [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x7c [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x7e [ 1.243650] pciback 0000:0a:00.2: added config field at offset 0x7f [ 1.243650] pciback 0000:0a:00.2: enabling device [ 1.243650] xen: registering gsi 29 triggering 0 polarity 1 [ 1.243650] xen_allocate_pirq: returning irq 29 for gsi 29 [ 1.243650] xen: --> irq=29 [ 1.257686] Already setup the GSI :29 [ 1.258681] pciback 0000:0a:00.2: PCI INT B -> GSI 29 (level, low) -> IRQ 29 [ 1.258681] pciback 0000:0a:00.2: reset device [ 1.258681] pciback 0000:0a:00.2: PCI INT B disabled [ 1.258681] pciback 0000:0a:00.1: initializing... [ 1.258681] pciback 0000:0a:00.1: initializing config [ 1.258681] pciback 0000:0a:00.1: initializing virtual configuration space [ 1.258681] pciback 0000:0a:00.1: added config field at offset 0x00 [ 1.258681] pciback 0000:0a:00.1: added config field at offset 0x02 [ 1.258681] pciback 0000:0a:00.1: added config field at offset 0x04 [ 1.258681] pciback 0000:0a:00.1: added config field at offset 0x3c [ 1.258681] pciback 0000:0a:00.1: added config field at offset 0x3d [ 1.258681] pciback 0000:0a:00.1: added config field at offset 0x0c [ 1.258681] pciback 0000:0a:00.1: added config field at offset 0x0d [ 1.258681] pciback 0000:0a:00.1: added config field at offset 0x0f [ 1.258681] pciback 0000:0a:00.1: added config field at offset 0x10 [ 1.258681] pciback 0000:0a:00.1: added config field at offset 0x14 [ 1.258681] pciback 0000:0a:00.1: added config field at offset 0x18 [ 1.258681] pciback 0000:0a:00.1: added config field at offset 0x1c [ 1.258681] pciback 0000:0a:00.1: added config field at offset 0x20 [ 1.258681] pciback 0000:0a:00.1: added config field at offset 0x24 [ 1.272319] pciback 0000:0a:00.1: added config field at offset 0x30 [ 1.272358] pciback 0000:0a:00.1: Found capability 0x1 at 0x78 [ 1.272363] pciback 0000:0a:00.1: added config field at offset 0x78 [ 1.272367] pciback 0000:0a:00.1: added config field at offset 0x7a [ 1.272373] pciback 0000:0a:00.1: added config field at offset 0x7c [ 1.272376] pciback 0000:0a:00.1: added config field at offset 0x7e [ 1.272379] pciback 0000:0a:00.1: added config field at offset 0x7f [ 1.272382] pciback 0000:0a:00.1: enabling device [ 1.272396] xen: registering gsi 28 triggering 0 polarity 1 [ 1.272402] alloc irq_desc for 28 on node 0 [ 1.272405] alloc kstat_irqs on node 0 [ 1.272409] xen: --> irq=28 [ 1.272425] pciback 0000:0a:00.1: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 1.273312] pciback 0000:0a:00.1: reset device [ 1.273312] pciback 0000:0a:00.1: PCI INT A disabled [ 1.273312] pciback 0000:0a:00.0: initializing... [ 1.273312] pciback 0000:0a:00.0: initializing config [ 1.273312] pciback 0000:0a:00.0: initializing virtual configuration space [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x00 [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x02 [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x04 [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x3c [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x3d [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x0c [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x0d [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x0f [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x10 [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x14 [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x18 [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x1c [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x20 [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x24 [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x30 [ 1.273312] pciback 0000:0a:00.0: Found capability 0x1 at 0x78 [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x78 [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x7a [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x7c [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x7e [ 1.273312] pciback 0000:0a:00.0: added config field at offset 0x7f [ 1.273312] pciback 0000:0a:00.0: enabling device [ 1.273312] xen: registering gsi 28 triggering 0 polarity 1 [ 1.273312] xen_allocate_pirq: returning irq 28 for gsi 28 [ 1.273312] xen: --> irq=28 [ 1.286486] Already setup the GSI :28 [ 1.287481] pciback 0000:0a:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 1.287481] pciback 0000:0a:00.0: reset device [ 1.287481] pciback 0000:0a:00.0: PCI INT A disabled [ 1.304136] blktap_device_init: blktap device major 253 [ 1.305122] blktap_ring_init: blktap ring major: 251 [ 1.320120] registering netback [ 1.331860] alloc irq_desc for 1745 on node 0 [ 1.331863] alloc kstat_irqs on node 0 [ 1.332696] Non-volatile memory driver v1.3 [ 1.333687] Linux agpgart interface v0.103 [ 1.343089] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.352654] brd: module loaded [ 1.429624] loop: module loaded [ 1.435009] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.440826] ahci 0000:00:11.0: version 3.0 [ 1.440844] xen: registering gsi 19 triggering 0 polarity 1 [ 1.440854] alloc irq_desc for 19 on node 0 [ 1.440857] alloc kstat_irqs on node 0 [ 1.440862] xen: --> irq=19 [ 1.440890] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.441766] alloc irq_desc for 1744 on node 0 [ 1.441766] alloc kstat_irqs on node 0 [ 1.446357] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.447202] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.457885] scsi0 : ahci [ 1.463538] scsi1 : ahci [ 1.469043] scsi2 : ahci [ 1.474503] scsi3 : ahci [ 1.479941] scsi4 : ahci [ 1.485208] scsi5 : ahci [ 1.490349] ata1: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff100 irq 1744 [ 1.491312] ata2: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff180 irq 1744 [ 1.500143] ata3: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff200 irq 1744 [ 1.500143] ata4: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff280 irq 1744 [ 1.500143] ata5: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff300 irq 1744 [ 1.500143] ata6: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff380 irq 1744 [ 1.501556] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI [ 1.501558] Copyright (c) 1999-2006 Intel Corporation. [ 1.501670] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 1.501709] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 1.501828] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 [ 1.501830] Copyright (c) 2007-2009 Intel Corporation. [ 1.501923] Intel(R) Virtual Function Network Driver - version 1.0.0-k0 [ 1.501925] Copyright (c) 2009 Intel Corporation. [ 1.502210] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.502212] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.502600] sky2 driver version 1.25 [ 1.502909] tun: Universal TUN/TAP device driver, 1.6 [ 1.502911] tun: (C) 1999-2004 Max Krasnyansky [ 1.503018] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.503038] xen: registering gsi 46 triggering 0 polarity 1 [ 1.503046] alloc irq_desc for 46 on node 0 [ 1.503048] alloc kstat_irqs on node 0 [ 1.503052] xen: --> irq=46 [ 1.503112] r8169 0000:09:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46 [ 1.503121] r8169 0000:09:00.0: enabling Mem-Wr-Inval [ 1.503184] r8169 0000:09:00.0: setting latency timer to 64 [ 1.503270] alloc irq_desc for 1743 on node 0 [ 1.503273] alloc kstat_irqs on node 0 [ 1.503515] eth0: RTL8168d/8111d at 0xffffc90000070000, 40:61:86:f4:67:d9, XID 081000c0 IRQ 1743 [ 1.554829] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.554846] xen: registering gsi 51 triggering 0 polarity 1 [ 1.554850] alloc irq_desc for 51 on node 0 [ 1.554852] alloc kstat_irqs on node 0 [ 1.554855] xen: --> irq=51 [ 1.554917] r8169 0000:08:00.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51 [ 1.554925] r8169 0000:08:00.0: enabling Mem-Wr-Inval [ 1.554963] r8169 0000:08:00.0: setting latency timer to 64 [ 1.555028] alloc irq_desc for 1742 on node 0 [ 1.555030] alloc kstat_irqs on node 0 [ 1.555278] eth1: RTL8168d/8111d at 0xffffc90000074000, 40:61:86:f4:67:d8, XID 081000c0 IRQ 1742 [ 1.614971] console [netcon0] enabled [ 1.615955] netconsole: network logging started [ 1.626268] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.631856] xen: registering gsi 17 triggering 0 polarity 1 [ 1.631863] alloc irq_desc for 17 on node 0 [ 1.631866] alloc kstat_irqs on node 0 [ 1.631870] xen: --> irq=17 [ 1.631922] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.632834] ehci_hcd 0000:00:12.2: enabling bus mastering [ 1.632834] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.643528] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.644511] ehci_hcd 0000:00:12.2: debug port 1 [ 1.644511] ehci_hcd 0000:00:12.2: enabling Mem-Wr-Inval [ 1.644511] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf98ff400 [ 1.666216] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.671809] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.672779] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.672779] usb usb1: Product: EHCI Host Controller [ 1.672779] usb usb1: Manufacturer: Linux 2.6.32.26-xen-next-2.6.32.x-20101210 ehci_hcd [ 1.672779] usb usb1: SerialNumber: 0000:00:12.2 [ 1.700419] usb usb1: configuration #1 chosen from 1 choice [ 1.706244] hub 1-0:1.0: USB hub found [ 1.711925] hub 1-0:1.0: 5 ports detected [ 1.717613] xen: registering gsi 17 triggering 0 polarity 1 [ 1.717617] xen_allocate_pirq: returning irq 17 for gsi 17 [ 1.718507] xen: --> irq=17 [ 1.723294] Already setup the GSI :17 [ 1.724289] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.724289] ehci_hcd 0000:00:13.2: enabling bus mastering [ 1.724289] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.740462] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.746275] ehci_hcd 0000:00:13.2: debug port 1 [ 1.747244] ehci_hcd 0000:00:13.2: enabling Mem-Wr-Inval [ 1.747244] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf98ff800 [ 1.763226] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.768765] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.769737] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.769737] usb usb2: Product: EHCI Host Controller [ 1.769737] usb usb2: Manufacturer: Linux 2.6.32.26-xen-next-2.6.32.x-20101210 ehci_hcd [ 1.769737] usb usb2: SerialNumber: 0000:00:13.2 [ 1.796636] usb usb2: configuration #1 chosen from 1 choice [ 1.802538] hub 2-0:1.0: USB hub found [ 1.805158] ata4: SATA link down (SStatus 0 SControl 300) [ 1.805198] ata6: SATA link down (SStatus 0 SControl 300) [ 1.805208] ata5: SATA link down (SStatus 0 SControl 300) [ 1.805235] ata2: SATA link down (SStatus 0 SControl 300) [ 1.805440] ata3: SATA link down (SStatus 0 SControl 300) [ 1.837352] hub 2-0:1.0: 5 ports detected [ 1.843298] xen: registering gsi 17 triggering 0 polarity 1 [ 1.843306] xen_allocate_pirq: returning irq 17 for gsi 17 [ 1.844205] xen: --> irq=17 [ 1.849239] Already setup the GSI :17 [ 1.850235] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.850235] ehci_hcd 0000:00:16.2: enabling bus mastering [ 1.850235] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 1.867053] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.868036] ehci_hcd 0000:00:16.2: debug port 1 [ 1.868036] ehci_hcd 0000:00:16.2: enabling Mem-Wr-Inval [ 1.868036] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf98ffc00 [ 1.890204] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.895920] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.900149] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.900149] usb usb3: Product: EHCI Host Controller [ 1.900149] usb usb3: Manufacturer: Linux 2.6.32.26-xen-next-2.6.32.x-20101210 ehci_hcd [ 1.900149] usb usb3: SerialNumber: 0000:00:16.2 [ 1.901836] usb usb3: configuration #1 chosen from 1 choice [ 1.901922] hub 3-0:1.0: USB hub found [ 1.901959] hub 3-0:1.0: 4 ports detected [ 1.902075] xen: registering gsi 46 triggering 0 polarity 1 [ 1.902077] xen_allocate_pirq: returning irq 46 for gsi 46 [ 1.902078] xen: --> irq=46 [ 1.902087] Already setup the GSI :46 [ 1.902090] ehci_hcd 0000:07:01.2: PCI INT C -> GSI 46 (level, low) -> IRQ 46 [ 1.902111] ehci_hcd 0000:07:01.2: EHCI Host Controller [ 1.902343] ehci_hcd 0000:07:01.2: new USB bus registered, assigned bus number 4 [ 1.923173] ehci_hcd 0000:07:01.2: irq 46, io mem 0xf9cffc00 [ 1.929127] ehci_hcd 0000:07:01.2: USB 2.0 started, EHCI 1.00 [ 1.929162] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.929165] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.929167] usb usb4: Product: EHCI Host Controller [ 1.929169] usb usb4: Manufacturer: Linux 2.6.32.26-xen-next-2.6.32.x-20101210 ehci_hcd [ 1.929170] usb usb4: SerialNumber: 0000:07:01.2 [ 1.929293] usb usb4: configuration #1 chosen from 1 choice [ 1.929411] hub 4-0:1.0: USB hub found [ 1.929438] hub 4-0:1.0: 5 ports detected [ 1.929825] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.929856] xen: registering gsi 18 triggering 0 polarity 1 [ 1.929862] alloc irq_desc for 18 on node 0 [ 1.929864] alloc kstat_irqs on node 0 [ 1.929868] xen: --> irq=18 [ 1.929936] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.929959] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.930084] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 5 [ 1.930150] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf98fb000 [ 1.958361] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.959779] ata1.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133 [ 1.959782] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.961337] ata1.00: configured for UDMA/133 [ 1.972415] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5 [ 1.973098] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.973186] sd 0:0:0:0: [sda] Write Protect is off [ 1.973189] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.973230] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1.973521] sda: [ 1.974165] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.986227] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.986232] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.986234] usb usb5: Product: OHCI Host Controller [ 1.986236] usb usb5: Manufacturer: Linux 2.6.32.26-xen-next-2.6.32.x-20101210 ohci_hcd [ 1.986238] usb usb5: SerialNumber: 0000:00:12.0 [ 1.986318] sda1 sda2 [ 1.986470] usb usb5: configuration #1 chosen from 1 choice [ 2.146086] hub 5-0:1.0: USB hub found [ 2.146693] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.157783] hub 5-0:1.0: 5 ports detected [ 2.163816] xen: registering gsi 18 triggering 0 polarity 1 [ 2.163819] xen_allocate_pirq: returning irq 18 for gsi 18 [ 2.164732] xen: --> irq=18 [ 2.169844] Already setup the GSI :18 [ 2.170840] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.170840] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.188387] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6 [ 2.189367] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf98fc000 [ 2.255361] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.256059] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.256059] usb usb6: Product: OHCI Host Controller [ 2.256059] usb usb6: Manufacturer: Linux 2.6.32.26-xen-next-2.6.32.x-20101210 ohci_hcd [ 2.256059] usb usb6: SerialNumber: 0000:00:13.0 [ 2.291939] usb usb6: configuration #1 chosen from 1 choice [ 2.298448] hub 6-0:1.0: USB hub found [ 2.304675] hub 6-0:1.0: 5 ports detected [ 2.310816] xen: registering gsi 18 triggering 0 polarity 1 [ 2.310819] xen_allocate_pirq: returning irq 18 for gsi 18 [ 2.311730] xen: --> irq=18 [ 2.316857] Already setup the GSI :18 [ 2.317852] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.317852] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 2.335422] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.336407] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf98fd000 [ 2.402367] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.403059] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.403059] usb usb7: Product: OHCI Host Controller [ 2.403059] usb usb7: Manufacturer: Linux 2.6.32.26-xen-next-2.6.32.x-20101210 ohci_hcd [ 2.403059] usb usb7: SerialNumber: 0000:00:14.5 [ 2.437582] usb usb7: configuration #1 chosen from 1 choice [ 2.444053] hub 7-0:1.0: USB hub found [ 2.446200] usb 4-5: new high speed USB device using ehci_hcd and address 4 [ 2.456677] hub 7-0:1.0: 2 ports detected [ 2.463048] xen: registering gsi 18 triggering 0 polarity 1 [ 2.463051] xen_allocate_pirq: returning irq 18 for gsi 18 [ 2.463917] xen: --> irq=18 [ 2.469240] Already setup the GSI :18 [ 2.470236] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.470236] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 2.488208] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 8 [ 2.489193] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf98fe000 [ 2.555361] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.556059] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.556059] usb usb8: Product: OHCI Host Controller [ 2.556059] usb usb8: Manufacturer: Linux 2.6.32.26-xen-next-2.6.32.x-20101210 ohci_hcd [ 2.556059] usb usb8: SerialNumber: 0000:00:16.0 [ 2.592885] usb usb8: configuration #1 chosen from 1 choice [ 2.599471] hub 8-0:1.0: USB hub found [ 2.605768] hub 8-0:1.0: 4 ports detected [ 2.612081] xen: registering gsi 44 triggering 0 polarity 1 [ 2.612087] alloc irq_desc for 44 on node 0 [ 2.612090] alloc kstat_irqs on node 0 [ 2.612094] xen: --> irq=44 [ 2.612148] ohci_hcd 0000:07:01.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44 [ 2.613058] ohci_hcd 0000:07:01.0: OHCI Host Controller [ 2.625074] ohci_hcd 0000:07:01.0: new USB bus registered, assigned bus number 9 [ 2.631370] ohci_hcd 0000:07:01.0: irq 44, io mem 0xf9cfd000 [ 2.639469] usb 4-5: New USB device found, idVendor=17e9, idProduct=019b [ 2.640428] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.640428] usb 4-5: Product: USB to DVI Adapter [ 2.640428] usb 4-5: Manufacturer: DisplayLink [ 2.640428] usb 4-5: SerialNumber: 019B-001912 [ 2.669792] usb 4-5: configuration #1 chosen from 1 choice [ 2.717262] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.718215] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.718215] usb usb9: Product: OHCI Host Controller [ 2.718215] usb usb9: Manufacturer: Linux 2.6.32.26-xen-next-2.6.32.x-20101210 ohci_hcd [ 2.718215] usb usb9: SerialNumber: 0000:07:01.0 [ 2.747428] usb usb9: configuration #1 chosen from 1 choice [ 2.753610] hub 9-0:1.0: USB hub found [ 2.759617] hub 9-0:1.0: 3 ports detected [ 2.765620] xen: registering gsi 45 triggering 0 polarity 1 [ 2.765627] alloc irq_desc for 45 on node 0 [ 2.765630] alloc kstat_irqs on node 0 [ 2.765634] xen: --> irq=45 [ 2.765668] ohci_hcd 0000:07:01.1: PCI INT B -> GSI 45 (level, low) -> IRQ 45 [ 2.766518] ohci_hcd 0000:07:01.1: OHCI Host Controller [ 2.777818] ohci_hcd 0000:07:01.1: new USB bus registered, assigned bus number 10 [ 2.778808] ohci_hcd 0000:07:01.1: irq 45, io mem 0xf9cfe000 [ 2.870230] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.871126] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.871126] usb usb10: Product: OHCI Host Controller [ 2.871126] usb usb10: Manufacturer: Linux 2.6.32.26-xen-next-2.6.32.x-20101210 ohci_hcd [ 2.871126] usb usb10: SerialNumber: 0000:07:01.1 [ 2.900404] usb usb10: configuration #1 chosen from 1 choice [ 2.906569] hub 10-0:1.0: USB hub found [ 2.912604] hub 10-0:1.0: 2 ports detected [ 2.918763] uhci_hcd: USB Universal Host Controller Interface driver [ 2.925334] usbcore: registered new interface driver usblp [ 2.926325] Initializing USB Mass Storage driver... [ 2.937481] usbcore: registered new interface driver usb-storage [ 2.938470] USB Mass Storage support registered. [ 2.949717] usbcore: registered new interface driver libusual [ 2.956164] PNP: No PS/2 controller found. Probing ports directly. [ 2.962852] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.963700] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.975311] mice: PS/2 mouse device common for all mice [ 2.982263] rtc_cmos 00:04: RTC can wake from S4 [ 2.988566] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.994622] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 3.002643] applesmc: supported laptop not found! [ 3.003635] applesmc: driver init failed (ret=-19)! [ 3.014845] f71805f: Unsupported Fintek device, skipping [ 3.020862] f71882fg: Unsupported Fintek device [ 3.027233] hdaps: supported laptop not found! [ 3.028222] hdaps: driver init failed (ret=-19)! [ 3.039701] lis3lv02d driver loaded. [ 3.046657] pc87360: PC8736x not detected, module not inserted. [ 3.053400] wdt: Xen WatchDog Timer Driver v0.01 [ 3.059483] wdt: initialized (timeout=60s, nowayout=0) [ 3.066078] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 3.072415] device-mapper: multipath: version 1.1.0 loaded [ 3.073404] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.084865] cpuidle: using governor ladder [ 3.085845] cpuidle: using governor menu [ 3.099065] usbcore: registered new interface driver hiddev [ 3.105049] usbcore: registered new interface driver usbhid [ 3.106043] usbhid: v2.6:USB HID core driver [ 3.116510] Netfilter messages via NETLINK v0.30. [ 3.122277] nf_conntrack version 0.5.0 (6144 buckets, 24576 max) [ 3.128281] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 3.129264] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 3.129264] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 3.145805] ctnetlink v0.93: registering with nfnetlink. [ 3.151886] xt_time: kernel timezone is -0000 [ 3.157838] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.163803] TCP cubic registered [ 3.164777] Initializing XFRM netlink socket [ 3.175836] NET: Registered protocol family 10 [ 3.181996] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.187769] IPv6 over IPv4 tunneling driver [ 3.193709] NET: Registered protocol family 17 [ 3.199529] Bridge firewalling registered [ 3.200503] Ebtables v2.0 registered [ 3.211076] ebt_ulog: out of memory trying to call netlink_kernel_create [ 3.213511] usb 9-2: new full speed USB device using ohci_hcd and address 2 [ 3.223154] powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor processors (6 cpu cores) (version 2.20.00) [ 3.224059] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 3.224059] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 3.243776] Freeing unused kernel memory: 860k freed [ 3.368260] usb 9-2: New USB device found, idVendor=067b, idProduct=2303 [ 3.368274] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.368285] usb 9-2: Product: USB-Serial Controller [ 3.368293] usb 9-2: Manufacturer: Prolific Technology Inc. [ 3.368915] usb 9-2: configuration #1 chosen from 1 choice [ 3.589107] usb 10-2: new full speed USB device using ohci_hcd and address 2 [ 3.744205] usb 10-2: New USB device found, idVendor=1130, idProduct=f211 [ 3.750474] usb 10-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.750474] usb 10-2: Product: USB AUDIO [ 3.750819] usb 10-2: configuration #1 chosen from 1 choice [ 3.759470] input: USB AUDIO as /devices/pci0000:00/0000:00:0a.0/0000:06:00.0/0000:07:01.1/usb10/10-2/10-2:1.3/input/input3 [ 3.759627] generic-usb 0003:1130:F211.0001: input,hidraw0: USB HID v1.10 Device [USB AUDIO ] on usb-0000:07:01.1-2/input3 [ 3.766318] input: USB AUDIO as /devices/pci0000:00/0000:00:0a.0/0000:06:00.0/0000:07:01.1/usb10/10-2/10-2:1.4/input/input4 [ 3.766463] generic-usb 0003:1130:F211.0002: input,hidraw1: USB HID v1.10 Device [USB AUDIO ] on usb-0000:07:01.1-2/input4 [ 5.377985] kjournald starting. Commit interval 5 seconds [ 5.378017] EXT3-fs: mounted filesystem with journal data mode. [ 6.899156] udevd version 125 started [ 7.755953] ata1.00: configured for UDMA/133 [ 7.756928] ata1: EH complete [ 9.948749] ata1.00: configured for UDMA/133 [ 9.949722] ata1: EH complete [ 11.277601] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 11.298170] EXT3 FS on dm-0, internal journal [ 13.741283] Adding 2097144k swap on /dev/mapper/serveerstertje-swap. Priority:-1 extents:1 across:2097144k [ 14.869753] r8169: eth1: link up [ 14.870753] r8169: eth1: link up [ 15.033001] r8169: eth0: link up [ 15.034014] r8169: eth0: link up [ 37.088007] FW: BLOCKED IGMP: IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=15526 PROTO=2 [ 39.905827] kjournald starting. Commit interval 5 seconds [ 39.905888] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 39.915957] EXT3 FS on sda1, internal journal [ 39.915985] EXT3-fs: mounted filesystem with writeback data mode. [ 40.431257] kjournald starting. Commit interval 5 seconds [ 40.439387] EXT3 FS on dm-2, internal journal [ 40.439422] EXT3-fs: mounted filesystem with writeback data mode. [ 40.957951] kjournald starting. Commit interval 5 seconds [ 40.972167] EXT3 FS on dm-3, internal journal [ 40.973080] EXT3-fs: mounted filesystem with writeback data mode. [ 41.443538] kjournald starting. Commit interval 5 seconds [ 41.454204] EXT3 FS on dm-4, internal journal [ 41.454230] EXT3-fs: mounted filesystem with writeback data mode. [ 41.833599] EXT4-fs (dm-5): mounted filesystem with ordered data mode [ 162.127579] FW: BLOCKED IGMP: IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=15925 PROTO=2 [ 164.840362] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=74.125.79.102 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=57034 PROTO=TCP SPT=80 DPT=54409 WINDOW=115 RES=0x00 ACK FIN URGP=0 [ 165.223719] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=74.125.79.142 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=27768 PROTO=TCP SPT=80 DPT=54419 WINDOW=109 RES=0x00 ACK FIN URGP=0 [ 165.262333] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=74.125.79.102 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=57035 PROTO=TCP SPT=80 DPT=54409 WINDOW=115 RES=0x00 ACK FIN URGP=0 [ 165.294697] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=74.125.79.148 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=1489 PROTO=TCP SPT=80 DPT=54420 WINDOW=107 RES=0x00 ACK FIN URGP=0 [ 165.645240] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=74.125.79.142 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=27769 PROTO=TCP SPT=80 DPT=54419 WINDOW=109 RES=0x00 ACK FIN URGP=0 [ 165.714715] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=74.125.79.148 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=1490 PROTO=TCP SPT=80 DPT=54420 WINDOW=107 RES=0x00 ACK FIN URGP=0 [ 166.106984] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=74.125.79.102 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=57036 PROTO=TCP SPT=80 DPT=54409 WINDOW=115 RES=0x00 ACK FIN URGP=0 [ 166.489661] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=74.125.79.142 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=27770 PROTO=TCP SPT=80 DPT=54419 WINDOW=109 RES=0x00 ACK FIN URGP=0 [ 166.556492] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=74.125.79.148 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=1491 PROTO=TCP SPT=80 DPT=54420 WINDOW=107 RES=0x00 ACK FIN URGP=0 [ 167.795969] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=74.125.79.102 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=57037 PROTO=TCP SPT=80 DPT=54409 WINDOW=115 RES=0x00 ACK FIN URGP=0 [ 171.173373] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=74.125.79.102 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=57038 PROTO=TCP SPT=80 DPT=54409 WINDOW=115 RES=0x00 ACK FIN URGP=0 [ 177.928787] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=74.125.79.102 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=57039 PROTO=TCP SPT=80 DPT=54409 WINDOW=115 RES=0x00 ACK FIN URGP=0 [ 187.933869] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=74.125.79.102 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=57030 PROTO=TCP SPT=80 DPT=54409 WINDOW=115 RES=0x00 ACK FIN URGP=0 [ 197.938953] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=74.125.79.102 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=57030 PROTO=TCP SPT=80 DPT=54409 WINDOW=115 RES=0x00 ACK FIN URGP=0 [ 198.321557] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=74.125.79.142 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=50636 PROTO=TCP SPT=80 DPT=54419 WINDOW=109 RES=0x00 ACK FIN URGP=0 [ 207.943748] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=74.125.79.102 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=57030 PROTO=TCP SPT=80 DPT=54409 WINDOW=115 RES=0x00 ACK FIN URGP=0 [ 208.326638] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=74.125.79.142 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=50636 PROTO=TCP SPT=80 DPT=54419 WINDOW=109 RES=0x00 ACK FIN URGP=0 [ 228.138365] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=91.211.73.73 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=246 ID=38831 DF PROTO=TCP SPT=80 DPT=54428 WINDOW=8190 RES=0x00 ACK FIN URGP=0 [ 228.146298] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=91.211.73.73 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=246 ID=41903 DF PROTO=TCP SPT=80 DPT=54423 WINDOW=8190 RES=0x00 ACK FIN URGP=0 [ 228.146298] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=91.211.73.73 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=246 ID=39855 DF PROTO=TCP SPT=80 DPT=54426 WINDOW=8190 RES=0x00 ACK FIN URGP=0 [ 231.159835] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=91.211.73.73 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=246 ID=52701 DF PROTO=TCP SPT=80 DPT=54424 WINDOW=8190 RES=0x00 ACK FIN URGP=0 [ 243.186410] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=91.211.73.74 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=246 ID=30330 DF PROTO=TCP SPT=80 DPT=54425 WINDOW=8190 RES=0x00 ACK FIN URGP=0 [ 243.223509] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=91.211.73.73 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=246 ID=30074 DF PROTO=TCP SPT=80 DPT=54427 WINDOW=8190 RES=0x00 ACK FIN URGP=0 [ 256.951716] kjournald starting. Commit interval 5 seconds [ 256.962800] EXT3 FS on dm-6, internal journal [ 256.962827] EXT3-fs: mounted filesystem with writeback data mode. [ 257.490321] kjournald starting. Commit interval 5 seconds [ 257.496341] EXT3 FS on dm-9, internal journal [ 257.496368] EXT3-fs: mounted filesystem with writeback data mode. [ 257.994376] kjournald starting. Commit interval 5 seconds [ 258.006865] EXT3 FS on dm-7, internal journal [ 258.006892] EXT3-fs: mounted filesystem with writeback data mode. [ 261.217352] alloc irq_desc for 1741 on node 0 [ 261.217357] alloc kstat_irqs on node 0 [ 261.217461] alloc irq_desc for 1740 on node 0 [ 261.217467] alloc kstat_irqs on node 0 [ 261.217957] XENBUS: Unable to read cpu state [ 261.235595] XENBUS: Unable to read cpu state [ 261.235763] XENBUS: Unable to read cpu state [ 261.235909] XENBUS: Unable to read cpu state [ 261.236051] XENBUS: Unable to read cpu state [ 261.236226] XENBUS: Unable to read cpu state [ 269.445740] alloc irq_desc for 1739 on node 0 [ 269.445746] alloc kstat_irqs on node 0 [ 269.998998] alloc irq_desc for 1738 on node 0 [ 269.999005] alloc kstat_irqs on node 0 [ 270.366363] device vif1.0 entered promiscuous mode [ 270.386285] xen_bridge: port 1(vif1.0) entering learning state [ 270.864967] xen_bridge: port 1(vif1.0) entering disabled state [ 270.887609] xen_bridge: port 1(vif1.0) entering learning state [ 272.461359] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi) [ 272.475643] alloc irq_desc for 1737 on node 0 [ 272.475647] alloc kstat_irqs on node 0 [ 272.508201] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi) [ 272.522017] alloc irq_desc for 1736 on node 0 [ 272.522020] alloc kstat_irqs on node 0 [ 278.724433] frontend_changed: backend/vbd/1/2049: prepare for reconnect [ 278.785921] frontend_changed: backend/vbd/1/2050: prepare for reconnect [ 279.150315] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 279.205842] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 279.282006] alloc irq_desc for 1735 on node 0 [ 279.282012] alloc kstat_irqs on node 0 [ 285.901261] xen_bridge: port 1(vif1.0) entering forwarding state [ 287.197902] FW: BLOCKED IGMP: IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=16330 PROTO=2 [ 293.947087] alloc irq_desc for 1734 on node 0 [ 293.947092] alloc kstat_irqs on node 0 [ 294.797559] device vif2.0 entered promiscuous mode [ 294.815295] xen_bridge: port 2(vif2.0) entering learning state [ 294.848387] alloc irq_desc for 1733 on node 0 [ 294.848393] alloc kstat_irqs on node 0 [ 294.977546] xen_bridge: port 2(vif2.0) entering disabled state [ 294.996657] xen_bridge: port 2(vif2.0) entering learning state [ 297.531793] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi) [ 297.543696] alloc irq_desc for 1732 on node 0 [ 297.543700] alloc kstat_irqs on node 0 [ 297.582958] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi) [ 297.594443] alloc irq_desc for 1731 on node 0 [ 297.594446] alloc kstat_irqs on node 0 [ 303.659709] frontend_changed: backend/vbd/2/2049: prepare for reconnect [ 303.808914] frontend_changed: backend/vbd/2/2050: prepare for reconnect [ 304.182818] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 304.245761] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 304.330347] alloc irq_desc for 1730 on node 0 [ 304.330354] alloc kstat_irqs on node 0 [ 310.008095] xen_bridge: port 2(vif2.0) entering forwarding state [ 318.833637] alloc irq_desc for 1729 on node 0 [ 318.833642] alloc kstat_irqs on node 0 [ 319.873340] device vif3.0 entered promiscuous mode [ 319.887591] xen_bridge: port 3(vif3.0) entering learning state [ 320.022579] alloc irq_desc for 1728 on node 0 [ 320.022585] alloc kstat_irqs on node 0 [ 320.049511] xen_bridge: port 3(vif3.0) entering disabled state [ 320.169254] xen_bridge: port 3(vif3.0) entering learning state [ 321.690560] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi) [ 321.699759] alloc irq_desc for 1727 on node 0 [ 321.699767] alloc kstat_irqs on node 0 [ 322.013993] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi) [ 322.022754] alloc irq_desc for 1726 on node 0 [ 322.022759] alloc kstat_irqs on node 0 [ 327.914321] frontend_changed: backend/vbd/3/2049: prepare for reconnect [ 327.995616] frontend_changed: backend/vbd/3/2050: prepare for reconnect [ 328.291415] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 328.355551] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 328.431582] alloc irq_desc for 1725 on node 0 [ 328.431586] alloc kstat_irqs on node 0 [ 335.178249] xen_bridge: port 3(vif3.0) entering forwarding state [ 343.602825] alloc irq_desc for 1724 on node 0 [ 343.602830] alloc kstat_irqs on node 0 [ 344.735771] device vif4.0 entered promiscuous mode [ 344.747846] xen_bridge: port 4(vif4.0) entering learning state [ 344.785400] alloc irq_desc for 1723 on node 0 [ 344.785405] alloc kstat_irqs on node 0 [ 345.064568] xen_bridge: port 4(vif4.0) entering disabled state [ 345.080247] xen_bridge: port 4(vif4.0) entering learning state [ 346.691340] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi) [ 346.698582] alloc irq_desc for 1722 on node 0 [ 346.698585] alloc kstat_irqs on node 0 [ 346.740993] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi) [ 346.748122] alloc irq_desc for 1721 on node 0 [ 346.748127] alloc kstat_irqs on node 0 [ 352.819113] frontend_changed: backend/vbd/4/51713: prepare for reconnect [ 352.901416] frontend_changed: backend/vbd/4/51714: prepare for reconnect [ 353.261941] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 353.310050] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 353.424590] alloc irq_desc for 1720 on node 0 [ 353.424595] alloc kstat_irqs on node 0 [ 360.080121] xen_bridge: port 4(vif4.0) entering forwarding state [ 368.958288] alloc irq_desc for 1719 on node 0 [ 368.958296] alloc kstat_irqs on node 0 [ 370.186184] device vif5.0 entered promiscuous mode [ 370.196601] xen_bridge: port 5(vif5.0) entering learning state [ 370.539810] xen_bridge: port 5(vif5.0) entering disabled state [ 370.553883] xen_bridge: port 5(vif5.0) entering learning state [ 370.560262] alloc irq_desc for 1718 on node 0 [ 370.560268] alloc kstat_irqs on node 0 [ 377.290881] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi) [ 377.297234] alloc irq_desc for 1717 on node 0 [ 377.297239] alloc kstat_irqs on node 0 [ 377.622036] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi) [ 377.628039] alloc irq_desc for 1716 on node 0 [ 377.628044] alloc kstat_irqs on node 0 [ 383.701293] frontend_changed: backend/vbd/5/2049: prepare for reconnect [ 383.784482] frontend_changed: backend/vbd/5/2050: prepare for reconnect [ 384.079855] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 384.114335] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 384.256910] alloc irq_desc for 1715 on node 0 [ 384.256917] alloc kstat_irqs on node 0 [ 385.560264] xen_bridge: port 5(vif5.0) entering forwarding state [ 400.302699] alloc irq_desc for 1714 on node 0 [ 400.302704] alloc kstat_irqs on node 0 [ 401.528434] device vif6.0 entered promiscuous mode [ 401.538242] xen_bridge: port 6(vif6.0) entering learning state [ 401.687900] xen_bridge: port 6(vif6.0) entering disabled state [ 401.693553] alloc irq_desc for 1713 on node 0 [ 401.693561] alloc kstat_irqs on node 0 [ 401.701941] xen_bridge: port 6(vif6.0) entering learning state [ 403.675298] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi) [ 403.681396] alloc irq_desc for 1712 on node 0 [ 403.681400] alloc kstat_irqs on node 0 [ 403.734365] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi) [ 403.740424] alloc irq_desc for 1711 on node 0 [ 403.740427] alloc kstat_irqs on node 0 [ 409.921232] frontend_changed: backend/vbd/6/51713: prepare for reconnect [ 409.975355] frontend_changed: backend/vbd/6/51714: prepare for reconnect [ 410.271517] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 410.319088] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 410.482753] alloc irq_desc for 1710 on node 0 [ 410.482757] alloc kstat_irqs on node 0 [ 411.086053] FW: BLOCKED low udp input: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=88.159.76.91 DST=88.159.76.249 LEN=69 TOS=0x00 PREC=0x00 TTL=122 ID=20848 PROTO=UDP SPT=1122 DPT=161 LEN=49 [ 412.264241] FW: BLOCKED IGMP: IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=16695 PROTO=2 [ 413.329279] FW: BLOCKED low udp input: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=88.159.76.91 DST=88.159.76.249 LEN=69 TOS=0x00 PREC=0x00 TTL=122 ID=20870 PROTO=UDP SPT=1122 DPT=161 LEN=49 [ 416.707669] xen_bridge: port 6(vif6.0) entering forwarding state [ 427.540310] alloc irq_desc for 1709 on node 0 [ 427.540315] alloc kstat_irqs on node 0 [ 428.644487] device vif7.0 entered promiscuous mode [ 428.656533] xen_bridge: port 7(vif7.0) entering learning state [ 428.727353] alloc irq_desc for 1708 on node 0 [ 428.727364] alloc kstat_irqs on node 0 [ 429.172472] xen_bridge: port 7(vif7.0) entering disabled state [ 429.189743] xen_bridge: port 7(vif7.0) entering learning state [ 430.737775] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi) [ 430.744766] alloc irq_desc for 1707 on node 0 [ 430.744769] alloc kstat_irqs on node 0 [ 430.793233] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi) [ 430.800214] alloc irq_desc for 1706 on node 0 [ 430.800218] alloc kstat_irqs on node 0 [ 436.792215] frontend_changed: backend/vbd/7/2049: prepare for reconnect [ 436.848062] frontend_changed: backend/vbd/7/2050: prepare for reconnect [ 437.149556] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 437.206453] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 437.289976] alloc irq_desc for 1705 on node 0 [ 437.289983] alloc kstat_irqs on node 0 [ 444.196330] xen_bridge: port 7(vif7.0) entering forwarding state [ 454.471197] alloc irq_desc for 1704 on node 0 [ 454.471202] alloc kstat_irqs on node 0 [ 455.948155] device vif8.0 entered promiscuous mode [ 455.959190] xen_bridge: port 8(vif8.0) entering learning state [ 456.132460] xen_bridge: port 8(vif8.0) entering disabled state [ 456.146102] xen_bridge: port 8(vif8.0) entering learning state [ 456.194840] alloc irq_desc for 1703 on node 0 [ 456.194846] alloc kstat_irqs on node 0 [ 458.028505] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 458.035539] alloc irq_desc for 1702 on node 0 [ 458.035544] alloc kstat_irqs on node 0 [ 458.286687] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 458.293606] alloc irq_desc for 1701 on node 0 [ 458.293609] alloc kstat_irqs on node 0 [ 458.395094] alloc irq_desc for 1700 on node 0 [ 458.395098] alloc kstat_irqs on node 0 [ 471.152210] xen_bridge: port 8(vif8.0) entering forwarding state [ 485.294474] alloc irq_desc for 1699 on node 0 [ 485.294479] alloc kstat_irqs on node 0 [ 486.730956] device vif9.0 entered promiscuous mode [ 486.742614] xen_bridge: port 9(vif9.0) entering learning state [ 486.906464] xen_bridge: port 9(vif9.0) entering disabled state [ 486.921713] xen_bridge: port 9(vif9.0) entering learning state [ 487.719807] pciback pci-9-0: allocated pdev @ 0xffff88002592e180 [ 487.829167] pciback pci-9-0: getting be setup [ 487.832496] pciback pci-9-0: exporting dom 0 bus 4 slot 0 func 0 [ 487.842113] pciback 0000:04:00.0: registering for 9 [ 487.848536] pciback pci-9-0: exporting dom 0 bus 4 slot 0 func 1 [ 487.860361] pciback 0000:04:00.1: registering for 9 [ 487.869779] pciback pci-9-0: exporting dom 0 bus 4 slot 0 func 2 [ 487.875800] pciback 0000:04:00.2: registering for 9 [ 487.890954] pciback pci-9-0: exporting dom 0 bus 4 slot 0 func 3 [ 487.897071] pciback 0000:04:00.3: registering for 9 [ 487.917685] pciback pci-9-0: exporting dom 0 bus 4 slot 0 func 4 [ 487.923710] pciback 0000:04:00.4: registering for 9 [ 487.938695] pciback pci-9-0: exporting dom 0 bus 4 slot 0 func 5 [ 487.941930] pciback 0000:04:00.5: registering for 9 [ 487.951310] pciback pci-9-0: exporting dom 0 bus 4 slot 0 func 6 [ 487.957359] pciback 0000:04:00.6: registering for 9 [ 487.968209] pciback pci-9-0: exporting dom 0 bus 4 slot 0 func 7 [ 487.974374] pciback 0000:04:00.7: registering for 9 [ 487.986497] pciback pci-9-0: Publishing pci roots [ 487.986668] pciback pci-9-0: writing root 0 at 0000:04 [ 488.008203] pciback pci-9-0: Publishing pci roots [ 488.008557] pciback pci-9-0: Publishing pci roots [ 488.008902] pciback pci-9-0: Publishing pci roots [ 488.009407] pciback pci-9-0: Publishing pci roots [ 488.015636] pciback pci-9-0: Publishing pci roots [ 488.018953] pciback pci-9-0: Publishing pci roots [ 488.025080] pciback pci-9-0: Publishing pci roots [ 488.246307] pciback pci-9-0: fe state changed 1 [ 488.262351] alloc irq_desc for 1698 on node 0 [ 488.262357] alloc kstat_irqs on node 0 [ 492.287935] pciback pci-9-0: fe state changed 3 [ 492.288250] pciback pci-9-0: Reading frontend config [ 492.288673] pciback pci-9-0: Attaching to frontend resources - gnt_ref=8 evtchn=9 [ 492.288772] alloc irq_desc for 1697 on node 0 [ 492.288779] alloc kstat_irqs on node 0 [ 492.288822] pciback pci-9-0: Attached! [ 492.288826] pciback pci-9-0: Connecting... [ 492.298254] pciback pci-9-0: Connected? 0 [ 492.368408] blkback: ring-ref 9, event-channel 10, protocol 1 (x86_64-abi) [ 492.375451] alloc irq_desc for 1696 on node 0 [ 492.375456] alloc kstat_irqs on node 0 [ 492.657927] blkback: ring-ref 10, event-channel 11, protocol 1 (x86_64-abi) [ 492.667266] alloc irq_desc for 1695 on node 0 [ 492.667298] alloc kstat_irqs on node 0 [ 492.728413] blkback: ring-ref 11, event-channel 12, protocol 1 (x86_64-abi) [ 492.735345] alloc irq_desc for 1694 on node 0 [ 492.735351] alloc kstat_irqs on node 0 [ 492.736278] pciback 0000:04:00.1: enabling device (0000 -> 0002) [ 492.739502] xen: registering gsi 40 triggering 0 polarity 1 [ 492.739502] xen_allocate_pirq: returning irq 40 for gsi 40 [ 492.749498] xen: --> irq=40 [ 492.750097] Already setup the GSI :40 [ 492.754000] pciback 0000:04:00.1: PCI INT A -> GSI 40 (level, low) -> IRQ 40 [ 492.754000] pciback 0000:04:00.1: pciback[0000:04:00.1]: #40 on disable-> enable [ 492.757171] pciback 0000:04:00.1: pciback[0000:04:00.1]: #40 on enabled [ 492.757465] pciback 0000:04:00.1: enabling bus mastering [ 492.757481] pciback 0000:04:00.1: setting latency timer to 64 [ 492.779049] pciback 0000:04:00.1: enabling Mem-Wr-Inval [ 492.785683] pciback 0000:04:00.3: enabling device (0000 -> 0002) [ 492.786484] xen: registering gsi 41 triggering 0 polarity 1 [ 492.786484] xen_allocate_pirq: returning irq 41 for gsi 41 [ 492.786484] xen: --> irq=41 [ 492.799793] Already setup the GSI :41 [ 492.800731] pciback 0000:04:00.3: PCI INT B -> GSI 41 (level, low) -> IRQ 41 [ 492.800731] pciback 0000:04:00.3: pciback[0000:04:00.3]: #41 on disable-> enable [ 492.806985] pciback 0000:04:00.3: pciback[0000:04:00.3]: #41 on enabled [ 492.807294] pciback 0000:04:00.3: enabling bus mastering [ 492.807306] pciback 0000:04:00.3: setting latency timer to 64 [ 492.827857] pciback pci-9-0: fe state changed 4 [ 492.828911] pciback 0000:04:00.3: enabling Mem-Wr-Inval [ 492.835582] pciback 0000:04:00.5: enabling device (0000 -> 0002) [ 492.836015] xen: registering gsi 42 triggering 0 polarity 1 [ 492.836015] xen_allocate_pirq: returning irq 42 for gsi 42 [ 492.836015] xen: --> irq=42 [ 492.849965] Already setup the GSI :42 [ 492.850922] pciback 0000:04:00.5: PCI INT C -> GSI 42 (level, low) -> IRQ 42 [ 492.850922] pciback 0000:04:00.5: pciback[0000:04:00.5]: #42 on disable-> enable [ 492.857263] pciback 0000:04:00.5: pciback[0000:04:00.5]: #42 on enabled [ 492.857388] pciback 0000:04:00.5: enabling bus mastering [ 492.857398] pciback 0000:04:00.5: setting latency timer to 64 [ 492.877942] pciback 0000:04:00.5: enabling Mem-Wr-Inval [ 492.884341] pciback 0000:04:00.7: enabling device (0000 -> 0002) [ 492.885054] xen: registering gsi 43 triggering 0 polarity 1 [ 492.885054] xen_allocate_pirq: returning irq 43 for gsi 43 [ 492.885054] xen: --> irq=43 [ 492.898853] Already setup the GSI :43 [ 492.900938] pciback 0000:04:00.7: PCI INT D -> GSI 43 (level, low) -> IRQ 43 [ 492.900938] pciback 0000:04:00.7: pciback[0000:04:00.7]: #43 on disable-> enable [ 492.906123] pciback 0000:04:00.7: pciback[0000:04:00.7]: #43 on enabled [ 492.906265] pciback 0000:04:00.7: enabling bus mastering [ 492.906277] pciback 0000:04:00.7: setting latency timer to 64 [ 492.926632] alloc irq_desc for 1693 on node 0 [ 492.926637] alloc kstat_irqs on node 0 [ 492.926954] pciback 0000:04:00.7: enabling Mem-Wr-Inval [ 492.933494] pciback 0000:04:00.0: enabling device (0000 -> 0002) [ 492.934056] xen: registering gsi 40 triggering 0 polarity 1 [ 492.934056] xen_allocate_pirq: returning irq 40 for gsi 40 [ 492.934056] xen: --> irq=40 [ 492.948009] Already setup the GSI :40 [ 492.948930] pciback 0000:04:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40 [ 492.948930] pciback 0000:04:00.0: pciback[0000:04:00.0]: #40 on disable-> enable [ 492.955262] pciback 0000:04:00.0: pciback[0000:04:00.0]: #40 on enabled [ 492.957959] pciback 0000:04:00.0: enabling bus mastering [ 492.957968] pciback 0000:04:00.0: setting latency timer to 64 [ 493.015279] pciback 0000:04:00.2: enabling device (0000 -> 0002) [ 493.016203] xen: registering gsi 41 triggering 0 polarity 1 [ 493.016203] xen_allocate_pirq: returning irq 41 for gsi 41 [ 493.016203] xen: --> irq=41 [ 493.034253] Already setup the GSI :41 [ 493.035167] pciback 0000:04:00.2: PCI INT B -> GSI 41 (level, low) -> IRQ 41 [ 493.035167] pciback 0000:04:00.2: pciback[0000:04:00.2]: #41 on disable-> enable [ 493.035167] pciback 0000:04:00.2: pciback[0000:04:00.2]: #41 on enabled [ 493.041950] pciback 0000:04:00.2: enabling bus mastering [ 493.041958] pciback 0000:04:00.2: setting latency timer to 64 [ 493.099217] pciback 0000:04:00.4: enabling device (0000 -> 0002) [ 493.100068] xen: registering gsi 42 triggering 0 polarity 1 [ 493.100068] xen_allocate_pirq: returning irq 42 for gsi 42 [ 493.100068] xen: --> irq=42 [ 493.118796] Already setup the GSI :42 [ 493.125233] pciback 0000:04:00.4: PCI INT C -> GSI 42 (level, low) -> IRQ 42 [ 493.125233] pciback 0000:04:00.4: pciback[0000:04:00.4]: #42 on disable-> enable [ 493.126284] pciback 0000:04:00.4: pciback[0000:04:00.4]: #42 on enabled [ 493.134049] pciback 0000:04:00.4: enabling bus mastering [ 493.134058] pciback 0000:04:00.4: setting latency timer to 64 [ 493.191037] pciback 0000:04:00.6: enabling device (0000 -> 0002) [ 493.191961] xen: registering gsi 43 triggering 0 polarity 1 [ 493.191961] xen_allocate_pirq: returning irq 43 for gsi 43 [ 493.191961] xen: --> irq=43 [ 493.212487] Already setup the GSI :43 [ 493.220366] pciback 0000:04:00.6: PCI INT D -> GSI 43 (level, low) -> IRQ 43 [ 493.220366] pciback 0000:04:00.6: pciback[0000:04:00.6]: #43 on disable-> enable [ 493.220953] pciback 0000:04:00.6: pciback[0000:04:00.6]: #43 on enabled [ 493.221197] pciback 0000:04:00.6: enabling bus mastering [ 493.221207] pciback 0000:04:00.6: setting latency timer to 64 [ 501.928238] xen_bridge: port 9(vif9.0) entering forwarding state [ 519.074662] alloc irq_desc for 1692 on node 0 [ 519.074667] alloc kstat_irqs on node 0 [ 520.337643] device vif10.0 entered promiscuous mode [ 520.349066] xen_bridge: port 10(vif10.0) entering learning state [ 520.619708] alloc irq_desc for 1691 on node 0 [ 520.619713] alloc kstat_irqs on node 0 [ 520.625794] xen_bridge: port 10(vif10.0) entering disabled state [ 520.640969] xen_bridge: port 10(vif10.0) entering learning state [ 522.629613] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi) [ 522.635997] alloc irq_desc for 1690 on node 0 [ 522.636003] alloc kstat_irqs on node 0 [ 522.682722] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi) [ 522.689033] alloc irq_desc for 1689 on node 0 [ 522.689040] alloc kstat_irqs on node 0 [ 528.841678] frontend_changed: backend/vbd/10/2049: prepare for reconnect [ 528.899199] frontend_changed: backend/vbd/10/2050: prepare for reconnect [ 529.210654] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 529.268767] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 529.345468] alloc irq_desc for 1688 on node 0 [ 529.345473] alloc kstat_irqs on node 0 [ 535.645179] xen_bridge: port 10(vif10.0) entering forwarding state [ 537.334248] FW: BLOCKED IGMP: IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=17056 PROTO=2 [ 561.218216] FW: BLOCKED low tcp input: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=88.159.79.43 DST=88.159.76.249 LEN=52 TOS=0x00 PREC=0x00 TTL=120 ID=30897 DF PROTO=TCP SPT=58743 DPT=81 WINDOW=8192 RES=0x00 SYN URGP=0 [ 564.122742] FW: BLOCKED low tcp input: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=88.159.79.43 DST=88.159.76.249 LEN=52 TOS=0x00 PREC=0x00 TTL=120 ID=30964 DF PROTO=TCP SPT=58738 DPT=515 WINDOW=8192 RES=0x00 SYN URGP=0 [ 564.142819] FW: BLOCKED low tcp input: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=88.159.79.43 DST=88.159.76.249 LEN=52 TOS=0x00 PREC=0x00 TTL=120 ID=30965 DF PROTO=TCP SPT=58743 DPT=81 WINDOW=8192 RES=0x00 SYN URGP=0 [ 588.265811] alloc irq_desc for 1687 on node 0 [ 588.265816] alloc kstat_irqs on node 0 [ 590.182501] pciback pci-11-0: allocated pdev @ 0xffff88001adc6580 [ 590.552528] pciback pci-11-0: getting be setup [ 590.552733] pciback pci-11-0: exporting dom 0 bus 3 slot 6 func 0 [ 590.556514] pciback 0000:03:06.0: registering for 11 [ 590.563091] pciback pci-11-0: Publishing pci roots [ 590.563286] pciback pci-11-0: writing root 0 at 0000:03 [ 590.677775] pciback pci-11-0: fe state changed 1 [ 590.849059] alloc irq_desc for 1686 on node 0 [ 590.849066] alloc kstat_irqs on node 0 [ 592.815494] device vif11.0 entered promiscuous mode [ 592.829605] xen_bridge: port 11(vif11.0) entering learning state [ 597.951102] xen_bridge: port 11(vif11.0) entering disabled state [ 597.968614] xen_bridge: port 11(vif11.0) entering learning state [ 608.423919] pciback pci-11-0: fe state changed 3 [ 608.424246] pciback pci-11-0: Reading frontend config [ 608.424786] pciback pci-11-0: Attaching to frontend resources - gnt_ref=8 evtchn=9 [ 608.424893] alloc irq_desc for 1685 on node 0 [ 608.424899] alloc kstat_irqs on node 0 [ 608.424944] pciback pci-11-0: Attached! [ 608.424947] pciback pci-11-0: Connecting... [ 608.438691] pciback pci-11-0: Connected? 0 [ 608.465658] blkback: ring-ref 9, event-channel 10, protocol 1 (x86_64-abi) [ 608.473837] alloc irq_desc for 1684 on node 0 [ 608.473841] alloc kstat_irqs on node 0 [ 608.578316] blkback: ring-ref 10, event-channel 11, protocol 1 (x86_64-abi) [ 608.586534] alloc irq_desc for 1683 on node 0 [ 608.586539] alloc kstat_irqs on node 0 [ 612.977267] xen_bridge: port 11(vif11.0) entering forwarding state [ 613.948185] pciback pci-11-0: fe state changed 4 [ 614.025532] alloc irq_desc for 1682 on node 0 [ 614.025536] alloc kstat_irqs on node 0 [ 623.724776] pciback 0000:03:06.0: enabling device (0000 -> 0001) [ 623.725647] xen: registering gsi 22 triggering 0 polarity 1 [ 623.725647] xen_allocate_pirq: returning irq 22 for gsi 22 [ 623.725647] xen: --> irq=22 [ 623.741191] Already setup the GSI :22 [ 623.749107] pciback 0000:03:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 623.749107] pciback 0000:03:06.0: pciback[0000:03:06.0]: #22 on disable-> enable [ 623.749549] pciback 0000:03:06.0: pciback[0000:03:06.0]: #22 on enabled [ 623.749845] pciback 0000:03:06.0: enabling bus mastering [ 636.820166] alloc irq_desc for 1681 on node 0 [ 636.820171] alloc kstat_irqs on node 0 [ 637.210698] block tda: sector-size: 512 capacity: 1048576 [ 637.577729] block tdb: sector-size: 512 capacity: 8388608 [ 638.923860] device vif12.0 entered promiscuous mode [ 638.937658] xen_bridge: port 12(vif12.0) entering learning state [ 639.199961] xen_bridge: port 12(vif12.0) entering disabled state [ 639.216241] xen_bridge: port 12(vif12.0) entering learning state [ 640.607100] alloc irq_desc for 1680 on node 0 [ 640.607106] alloc kstat_irqs on node 0 [ 642.280779] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi) [ 642.289473] alloc irq_desc for 1679 on node 0 [ 642.289480] alloc kstat_irqs on node 0 [ 642.338595] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi) [ 642.347269] alloc irq_desc for 1678 on node 0 [ 642.347273] alloc kstat_irqs on node 0 [ 649.228717] frontend_changed: backend/vbd/12/2049: prepare for reconnect [ 649.296783] frontend_changed: backend/vbd/12/2050: prepare for reconnect [ 649.721170] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 649.767100] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 649.884166] alloc irq_desc for 1677 on node 0 [ 649.884171] alloc kstat_irqs on node 0 [ 654.224125] xen_bridge: port 12(vif12.0) entering forwarding state [ 662.401373] FW: BLOCKED IGMP: IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=17423 PROTO=2 [ 677.534599] alloc irq_desc for 1676 on node 0 [ 677.534619] alloc kstat_irqs on node 0 [ 678.569269] device vif13.0 entered promiscuous mode [ 678.582173] xen_bridge: port 13(vif13.0) entering learning state [ 678.741177] xen_bridge: port 13(vif13.0) entering disabled state [ 678.757207] xen_bridge: port 13(vif13.0) entering learning state [ 679.730168] pciback pci-13-0: allocated pdev @ 0xffff88001f377900 [ 679.759894] pciback pci-13-0: getting be setup [ 679.760686] pciback pci-13-0: exporting dom 0 bus a slot 0 func 0 [ 679.764843] pciback 0000:0a:00.0: registering for 13 [ 679.775295] pciback pci-13-0: exporting dom 0 bus a slot 0 func 1 [ 679.785027] pciback 0000:0a:00.1: registering for 13 [ 679.798335] pciback pci-13-0: exporting dom 0 bus a slot 0 func 2 [ 679.808135] pciback 0000:0a:00.2: registering for 13 [ 679.830072] pciback pci-13-0: exporting dom 0 bus a slot 0 func 3 [ 679.836886] pciback 0000:0a:00.3: registering for 13 [ 679.852885] pciback pci-13-0: exporting dom 0 bus a slot 0 func 4 [ 679.862655] pciback 0000:0a:00.4: registering for 13 [ 679.877258] pciback pci-13-0: exporting dom 0 bus a slot 0 func 5 [ 679.887326] pciback 0000:0a:00.5: registering for 13 [ 679.894547] pciback pci-13-0: exporting dom 0 bus a slot 0 func 6 [ 679.904209] pciback 0000:0a:00.6: registering for 13 [ 679.917685] pciback pci-13-0: exporting dom 0 bus a slot 0 func 7 [ 679.930382] pciback 0000:0a:00.7: registering for 13 [ 679.946250] pciback pci-13-0: Publishing pci roots [ 679.946417] pciback pci-13-0: writing root 0 at 0000:0a [ 679.971933] pciback pci-13-0: Publishing pci roots [ 679.978491] pciback pci-13-0: Publishing pci roots [ 679.982143] pciback pci-13-0: Publishing pci roots [ 679.988758] pciback pci-13-0: Publishing pci roots [ 679.992214] pciback pci-13-0: Publishing pci roots [ 679.995873] pciback pci-13-0: Publishing pci roots [ 679.998019] pciback pci-13-0: Publishing pci roots [ 680.234068] pciback pci-13-0: fe state changed 1 [ 680.322648] alloc irq_desc for 1675 on node 0 [ 680.322654] alloc kstat_irqs on node 0 [ 684.362369] pciback pci-13-0: fe state changed 3 [ 684.362899] pciback pci-13-0: Reading frontend config [ 684.363240] pciback pci-13-0: Attaching to frontend resources - gnt_ref=8 evtchn=21 [ 684.363326] alloc irq_desc for 1674 on node 0 [ 684.363330] alloc kstat_irqs on node 0 [ 684.363372] pciback pci-13-0: Attached! [ 684.363374] pciback pci-13-0: Connecting... [ 684.372936] pciback pci-13-0: Connected? 0 [ 684.396406] pciback pci-13-0: fe state changed 4 [ 684.586783] blkback: ring-ref 9, event-channel 22, protocol 1 (x86_64-abi) [ 684.595365] alloc irq_desc for 1673 on node 0 [ 684.595370] alloc kstat_irqs on node 0 [ 684.731438] pciback 0000:0a:00.1: enabling device (0000 -> 0002) [ 684.736902] xen: registering gsi 28 triggering 0 polarity 1 [ 684.736902] xen_allocate_pirq: returning irq 28 for gsi 28 [ 684.736902] xen: --> irq=28 [ 684.748530] Already setup the GSI :28 [ 684.756489] pciback 0000:0a:00.1: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 684.756489] pciback 0000:0a:00.1: pciback[0000:0a:00.1]: #28 on disable-> enable [ 684.757104] pciback 0000:0a:00.1: pciback[0000:0a:00.1]: #28 on enabled [ 684.757459] pciback 0000:0a:00.1: enabling bus mastering [ 684.757472] pciback 0000:0a:00.1: setting latency timer to 64 [ 684.778415] blkback: ring-ref 10, event-channel 23, protocol 1 (x86_64-abi) [ 684.787013] pciback 0000:0a:00.1: enabling Mem-Wr-Inval [ 684.787021] alloc irq_desc for 1672 on node 0 [ 684.787025] alloc kstat_irqs on node 0 [ 684.790902] pciback 0000:0a:00.3: enabling device (0000 -> 0002) [ 684.791057] xen: registering gsi 29 triggering 0 polarity 1 [ 684.791057] xen_allocate_pirq: returning irq 29 for gsi 29 [ 684.791057] xen: --> irq=29 [ 684.808146] Already setup the GSI :29 [ 684.809053] pciback 0000:0a:00.3: PCI INT B -> GSI 29 (level, low) -> IRQ 29 [ 684.809053] pciback 0000:0a:00.3: pciback[0000:0a:00.3]: #29 on disable-> enable [ 684.816947] pciback 0000:0a:00.3: pciback[0000:0a:00.3]: #29 on enabled [ 684.817133] pciback 0000:0a:00.3: enabling bus mastering [ 684.817142] pciback 0000:0a:00.3: setting latency timer to 64 [ 684.842247] pciback 0000:0a:00.3: enabling Mem-Wr-Inval [ 684.848986] pciback 0000:0a:00.5: enabling device (0000 -> 0002) [ 684.849953] xen: registering gsi 30 triggering 0 polarity 1 [ 684.849953] xen_allocate_pirq: returning irq 30 for gsi 30 [ 684.849953] xen: --> irq=30 [ 684.866154] Already setup the GSI :30 [ 684.871282] pciback 0000:0a:00.5: PCI INT C -> GSI 30 (level, low) -> IRQ 30 [ 684.871282] pciback 0000:0a:00.5: pciback[0000:0a:00.5]: #30 on disable-> enable [ 684.874760] pciback 0000:0a:00.5: pciback[0000:0a:00.5]: #30 on enabled [ 684.880179] pciback 0000:0a:00.5: enabling bus mastering [ 684.880189] pciback 0000:0a:00.5: setting latency timer to 64 [ 684.906260] pciback 0000:0a:00.5: enabling Mem-Wr-Inval [ 684.912862] pciback 0000:0a:00.7: enabling device (0000 -> 0002) [ 684.913054] xen: registering gsi 31 triggering 0 polarity 1 [ 684.913054] xen_allocate_pirq: returning irq 31 for gsi 31 [ 684.913054] xen: --> irq=31 [ 684.930019] Already setup the GSI :31 [ 684.932592] pciback 0000:0a:00.7: PCI INT D -> GSI 31 (level, low) -> IRQ 31 [ 684.932592] pciback 0000:0a:00.7: pciback[0000:0a:00.7]: #31 on disable-> enable [ 684.938754] pciback 0000:0a:00.7: pciback[0000:0a:00.7]: #31 on enabled [ 684.939177] pciback 0000:0a:00.7: enabling bus mastering [ 684.939187] pciback 0000:0a:00.7: setting latency timer to 64 [ 684.970240] pciback 0000:0a:00.7: enabling Mem-Wr-Inval [ 684.976959] pciback 0000:0a:00.0: enabling device (0000 -> 0002) [ 684.977055] xen: registering gsi 28 triggering 0 polarity 1 [ 684.977055] xen_allocate_pirq: returning irq 28 for gsi 28 [ 684.977055] xen: --> irq=28 [ 684.994480] Already setup the GSI :28 [ 684.999327] pciback 0000:0a:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 684.999327] pciback 0000:0a:00.0: pciback[0000:0a:00.0]: #28 on disable-> enable [ 685.003338] pciback 0000:0a:00.0: pciback[0000:0a:00.0]: #28 on enabled [ 685.003632] pciback 0000:0a:00.0: enabling bus mastering [ 685.003642] pciback 0000:0a:00.0: setting latency timer to 64 [ 685.063975] pciback 0000:0a:00.2: enabling device (0000 -> 0002) [ 685.064953] xen: registering gsi 29 triggering 0 polarity 1 [ 685.064953] xen_allocate_pirq: returning irq 29 for gsi 29 [ 685.064953] xen: --> irq=29 [ 685.081560] Already setup the GSI :29 [ 685.088239] pciback 0000:0a:00.2: PCI INT B -> GSI 29 (level, low) -> IRQ 29 [ 685.088239] pciback 0000:0a:00.2: pciback[0000:0a:00.2]: #29 on disable-> enable [ 685.098959] pciback 0000:0a:00.2: pciback[0000:0a:00.2]: #29 on enabled [ 685.099062] pciback 0000:0a:00.2: enabling bus mastering [ 685.099071] pciback 0000:0a:00.2: setting latency timer to 64 [ 685.102496] alloc irq_desc for 1671 on node 0 [ 685.102501] alloc kstat_irqs on node 0 [ 685.160606] pciback 0000:0a:00.4: enabling device (0000 -> 0002) [ 685.168504] xen: registering gsi 30 triggering 0 polarity 1 [ 685.168504] xen_allocate_pirq: returning irq 30 for gsi 30 [ 685.168504] xen: --> irq=30 [ 685.169042] Already setup the GSI :30 [ 685.169048] pciback 0000:0a:00.4: PCI INT C -> GSI 30 (level, low) -> IRQ 30 [ 685.169067] pciback 0000:0a:00.4: pciback[0000:0a:00.4]: #30 on disable-> enable [ 685.169099] pciback 0000:0a:00.4: pciback[0000:0a:00.4]: #30 on enabled [ 685.169725] pciback 0000:0a:00.4: enabling bus mastering [ 685.169742] pciback 0000:0a:00.4: setting latency timer to 64 [ 685.236047] pciback 0000:0a:00.6: enabling device (0000 -> 0002) [ 685.236682] xen: registering gsi 31 triggering 0 polarity 1 [ 685.236682] xen_allocate_pirq: returning irq 31 for gsi 31 [ 685.236682] xen: --> irq=31 [ 685.254399] Already setup the GSI :31 [ 685.255323] pciback 0000:0a:00.6: PCI INT D -> GSI 31 (level, low) -> IRQ 31 [ 685.255323] pciback 0000:0a:00.6: pciback[0000:0a:00.6]: #31 on disable-> enable [ 685.261485] pciback 0000:0a:00.6: pciback[0000:0a:00.6]: #31 on enabled [ 685.261784] pciback 0000:0a:00.6: enabling bus mastering [ 685.261792] pciback 0000:0a:00.6: setting latency timer to 64 [ 693.765163] xen_bridge: port 13(vif13.0) entering forwarding state [ 730.337125] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=70.42.241.111 DST=88.159.76.249 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=0 DF PROTO=TCP SPT=80 DPT=54378 WINDOW=1751 RES=0x00 RST URGP=0 [ 787.469022] FW: BLOCKED IGMP: IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=17796 PROTO=2 [ 912.538171] FW: BLOCKED IGMP: IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=18175 PROTO=2 [ 983.892836] FW: New not syn:IN=eth0 OUT=eth0 SRC=217.149.217.48 DST=88.159.73.189 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=13153 DF PROTO=TCP SPT=51051 DPT=13568 WINDOW=4344 RES=0x00 ACK URGP=0 [ 1037.608236] FW: BLOCKED IGMP: IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=18572 PROTO=2 [ 1152.691883] alloc irq_desc for 1670 on node 0 [ 1152.691889] alloc kstat_irqs on node 0 [ 1153.352863] device vif14.0 entered promiscuous mode [ 1153.366881] xen_bridge: port 14(vif14.0) entering learning state [ 1153.510046] xen_bridge: port 14(vif14.0) entering disabled state [ 1153.528037] xen_bridge: port 14(vif14.0) entering learning state [ 1157.040438] device tap14.0 entered promiscuous mode [ 1157.049765] xen_bridge: port 15(tap14.0) entering learning state [ 1157.069887] alloc irq_desc for 1669 on node 0 [ 1157.069893] alloc kstat_irqs on node 0 [ 1157.765422] pciback 0000:05:00.1: enabling permissive mode configuration space accesses! [ 1157.766138] pciback 0000:05:00.1: permissive mode is potentially unsafe! [ 1157.853691] pciback 0000:05:00.0: enabling permissive mode configuration space accesses! [ 1157.854138] pciback 0000:05:00.0: permissive mode is potentially unsafe! [ 1158.068109] pciback pci-14-0: allocated pdev @ 0xffff88001f19c100 [ 1158.086538] pciback pci-14-0: getting be setup [ 1158.094161] pciback pci-14-0: exporting dom 0 bus 5 slot 0 func 1 [ 1158.098133] pciback 0000:05:00.1: registering for 14 [ 1158.109842] pciback pci-14-0: exporting dom 0 bus 5 slot 0 func 0 [ 1158.113578] pciback 0000:05:00.0: registering for 14 [ 1158.118842] pciback pci-14-0: Publishing pci roots [ 1158.119006] pciback pci-14-0: writing root 0 at 0000:05 [ 1158.137216] pciback pci-14-0: Publishing pci roots [ 1158.303880] pciback pci-14-0: fe state changed 1 [ 1162.637555] FW: BLOCKED IGMP: IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=18966 PROTO=2 [ 1168.536087] xen_bridge: port 14(vif14.0) entering forwarding state [ 1172.058093] xen_bridge: port 15(tap14.0) entering forwarding state [ 1287.696506] FW: BLOCKED IGMP: IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=19354 PROTO=2