Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32.26 (root@vm) (gcc version 4.4.5 (Debian 4.4.5-8) ) #2 SMP Mon Nov 29 14:35:53 EST 2010 Command line: placeholder root=UUID=aebc8747-abb3-413a-b808-b345a9a19111 ro xen-pciback.permissive xen-pciback.hide=(05:00.0)(05:00.1)(05:00.2) KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls xen_release_chunk: looking at area pfn d0000-f8000: 163840 pages freed xen_release_chunk: looking at area pfn fd000-fec00: 7168 pages freed xen_release_chunk: looking at area pfn fec01-fee00: 511 pages freed xen_release_chunk: looking at area pfn fee01-ffe00: 4095 pages freed released 175614 pages of unused memory BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000008f000 (usable) Xen: 000000000008f000 - 0000000000090000 (reserved) Xen: 0000000000090000 - 000000000009d000 (usable) Xen: 000000000009d000 - 0000000000100000 (reserved) Xen: 0000000000100000 - 00000000cf4bd000 (usable) Xen: 00000000cf4bd000 - 00000000cf4bf000 (reserved) Xen: 00000000cf4bf000 - 00000000cf4c3000 (usable) Xen: 00000000cf4c3000 - 00000000cf7bf000 (ACPI NVS) Xen: 00000000cf7bf000 - 00000000cf7df000 (usable) Xen: 00000000cf7df000 - 00000000cf7ff000 (ACPI data) Xen: 00000000cf7ff000 - 00000000cf800000 (usable) Xen: 00000000cf800000 - 00000000d0000000 (reserved) Xen: 00000000f8000000 - 00000000fd000000 (reserved) Xen: 00000000fec00000 - 00000000fec01000 (reserved) Xen: 00000000fee00000 - 00000000fee01000 (reserved) Xen: 00000000ffe00000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 000000025adfe000 (usable) DMI 2.5 present. last_pfn = 0x25adfe max_arch_pfn = 0x400000000 x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 last_pfn = 0xcf800 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 147ff000 init_memory_mapping: 0000000000000000-00000000cf800000 0000000000 - 00cf800000 page 4k kernel direct mapping tables up to cf800000 @ 100000-781000 init_memory_mapping: 0000000100000000-000000025adfe000 0100000000 - 025adfe000 page 4k kernel direct mapping tables up to 25adfe000 @ 13b84000-14e66000 RAMDISK: 02752000 - 12b56000 ACPI: RSDP 00000000000fe020 00024 (v02 INTEL ) ACPI: XSDT 00000000cf7fe120 00074 (v01 INTEL DX58SO 000011F6 01000013) ACPI: FACP 00000000cf7fd000 000F4 (v03 INTEL DX58SO 000011F6 MSFT 0100000D) ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000450/0 (20090903/tbfadt-557) ACPI Warning: Invalid length for Pm2ControlBlock: 0, using default 8 (20090903/tbfadt-607) ACPI: DSDT 00000000cf7f8000 04641 (v02 INTEL DX58SO 000011F6 MSFT 0100000D) ACPI: FACS 00000000cf728000 00040 ACPI: APIC 00000000cf7f7000 00138 (v02 INTEL DX58SO 000011F6 MSFT 0100000D) ACPI: WDDT 00000000cf7f6000 00040 (v01 INTEL DX58SO 000011F6 MSFT 0100000D) ACPI: MCFG 00000000cf7f5000 0003C (v01 INTEL DX58SO 000011F6 MSFT 0100000D) ACPI: ASF! 00000000cf7f4000 000AC (v32 INTEL DX58SO 000011F6 MSFT 0100000D) ACPI: HPET 00000000cf7f3000 00038 (v01 INTEL DX58SO 000011F6 MSFT 0100000D) ACPI: SSDT 00000000cf7e2000 0E134 (v01 INTEL SSDT PM 000011F6 MSFT 0100000D) ACPI: XMAR 00000000cf7df000 00140 (v01 INTEL DX58SO 000011F6 MSFT 0100000D) ACPI: WDTT 00000000cf7f1000 0020C (v02 INTEL DX58SO 000011F6 MSFT 0100000D) ACPI: ASPT 00000000cf7f2000 00034 (v04 INTEL PerfTune 000011F6 MSFT 0100000D) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000025adfe000 Bootmem setup node 0 0000000000000000-000000025adfe000 NODE_DATA [0000000000008000 - 000000000001ffff] bootmap [0000000000020000 - 000000000006b5bf] pages 4c (10 early reservations) ==> bootmem [0000000000 - 025adfe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0013ae1000 - 0013b84000] XEN PAGETABLES ==> [0013ae1000 - 0013b84000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #3 [0001000000 - 0002627e78] TEXT DATA BSS ==> [0001000000 - 0002627e78] #4 [0002752000 - 0012b56000] RAMDISK ==> [0002752000 - 0012b56000] #5 [0012b56000 - 0013ae1000] XEN START INFO ==> [0012b56000 - 0013ae1000] #6 [01f1229000 - 025adfe000] XEN EXTRA ==> [01f1229000 - 025adfe000] #7 [0002628000 - 000264215e] BRK ==> [0002628000 - 000264215e] #8 [0000100000 - 00006db000] PGTABLE ==> [0000100000 - 00006db000] #9 [0013b84000 - 0014661000] PGTABLE ==> [0013b84000 - 0014661000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0025adfe Movable zone start PFN for each node early_node_map[7] active PFN ranges 0: 0x00000000 -> 0x0000008f 0: 0x00000090 -> 0x0000009d 0: 0x00000100 -> 0x000cf4bd 0: 0x000cf4bf -> 0x000cf4c3 0: 0x000cf7bf -> 0x000cf7df 0: 0x000cf7ff -> 0x000cf800 0: 0x00100000 -> 0x0025adfe On node 0 totalpages: 2269820 DMA zone: 104 pages used for memmap DMA zone: 1502 pages reserved DMA zone: 2390 pages, LIFO batch:0 DMA32 zone: 26520 pages used for memmap DMA32 zone: 818506 pages, LIFO batch:31 Normal zone: 36075 pages used for memmap Normal zone: 1384723 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] disabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] disabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] disabled) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ERROR: Unable to locate IOAPIC for GSI 2 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ERROR: Unable to locate IOAPIC for GSI 9 Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a301 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 256 PM: Registered nosave memory: 000000000008f000 - 0000000000090000 PM: Registered nosave memory: 000000000009d000 - 0000000000100000 PM: Registered nosave memory: 00000000cf4bd000 - 00000000cf4bf000 PM: Registered nosave memory: 00000000cf4c3000 - 00000000cf7bf000 PM: Registered nosave memory: 00000000cf7df000 - 00000000cf7ff000 PM: Registered nosave memory: 00000000cf800000 - 00000000d0000000 PM: Registered nosave memory: 00000000d0000000 - 00000000f8000000 PM: Registered nosave memory: 00000000f8000000 - 00000000fd000000 PM: Registered nosave memory: 00000000fd000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 Allocating PCI resources starting at d0000000 (gap: d0000000:28000000) Booting paravirtualized kernel on Xen Xen version: 4.0.1 (preserve-AD) (dom0) NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 478 pages/cpu @ffff8800367f8000 s1927128 r8192 d22568 u1957888 pcpu-alloc: s1927128 r8192 d22568 u1957888 alloc=478*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2205619 Policy zone: Normal Kernel command line: placeholder root=UUID=aebc8747-abb3-413a-b808-b345a9a19111 ro xen-pciback.permissive xen-pciback.hide=(05:00.0)(05:00.1)(05:00.2) PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 DMA: software IO TLB at phys 0x20000000 - 0x24000000 xen_swiotlb_fixup: buf=ffff880020000000 size=67108864 xen_swiotlb_fixup: buf=ffff880024060000 size=32768 Memory: 6708584k/9877496k available (4665k kernel code, 798216k absent, 2370696k reserved, 3207k data, 3376k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:2304 xen: --> irq=0 xen: --> irq=1 xen: --> irq=2 xen: --> irq=3 xen: --> irq=4 xen: --> irq=5 xen: --> irq=6 xen: --> irq=7 xen: --> irq=8 xen: --> irq=9 xen: --> irq=10 xen: --> irq=11 xen: --> irq=12 xen: --> irq=13 xen: --> irq=14 xen: --> irq=15 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 xen: registering gsi 9 triggering 0 polarity 0 xen_allocate_pirq: returning irq 9 for gsi 9 xen: --> irq=9 xen: acpi sci 9 Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 6367 kB per task-struct memory footprint: 2688 bytes allocated 91750400 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups ODEBUG: 16 of 16 active objects replaced Xen: using vcpuop timer interface installing Xen timer for CPU 0 alloc irq_desc for 2303 on node 0 alloc kstat_irqs on node 0 Detected 3066.868 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6133.73 BogoMIPS (lpj=3066868) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 0/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks Performance Events: unsupported p6 CPU model 26 no PMU driver, software events only. lockdep: fixing up alternatives. SMP alternatives: switching to UP code ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 23530 entries in 93 pages alloc irq_desc for 2302 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2301 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2300 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2299 on node 0 alloc kstat_irqs on node 0 installing Xen timer for CPU 1 alloc irq_desc for 2298 on node 0 alloc kstat_irqs on node 0 lockdep: fixing up alternatives. SMP alternatives: switching to SMP code alloc irq_desc for 2297 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2296 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2295 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2294 on node 0 alloc kstat_irqs on node 0 Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 1/0x0 -> Node 0 CPU: Unsupported number of siblings 16 installing Xen timer for CPU 2 alloc irq_desc for 2293 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2292 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2291 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2290 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2289 on node 0 alloc kstat_irqs on node 0 Initializing CPU#2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 2/0x0 -> Node 0 CPU: Unsupported number of siblings 16 installing Xen timer for CPU 3 alloc irq_desc for 2288 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2287 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2286 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2285 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2284 on node 0 alloc kstat_irqs on node 0 Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 3/0x0 -> Node 0 CPU: Unsupported number of siblings 16 installing Xen timer for CPU 4 alloc irq_desc for 2283 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2282 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2281 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2280 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2279 on node 0 alloc kstat_irqs on node 0 Initializing CPU#4 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 4/0x0 -> Node 0 CPU: Unsupported number of siblings 16 installing Xen timer for CPU 5 alloc irq_desc for 2278 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2277 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2276 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2275 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2274 on node 0 alloc kstat_irqs on node 0 Initializing CPU#5 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 5/0x0 -> Node 0 CPU: Unsupported number of siblings 16 installing Xen timer for CPU 6 alloc irq_desc for 2273 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2272 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2271 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2270 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2269 on node 0 alloc kstat_irqs on node 0 Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 6/0x0 -> Node 0 CPU: Unsupported number of siblings 16 installing Xen timer for CPU 7 alloc irq_desc for 2268 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2267 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2266 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2265 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2264 on node 0 alloc kstat_irqs on node 0 Initializing CPU#7 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 7/0x0 -> Node 0 CPU: Unsupported number of siblings 16 Brought up 8 CPUs CPU0 attaching sched-domain: domain 0: span 0-7 level CPU groups: 0 1 2 3 4 5 6 7 CPU1 attaching sched-domain: domain 0: span 0-7 level CPU groups: 1 2 3 4 5 6 7 0 CPU2 attaching sched-domain: domain 0: span 0-7 level CPU groups: 2 3 4 5 6 7 0 1 CPU3 attaching sched-domain: domain 0: span 0-7 level CPU groups: 3 4 5 6 7 0 1 2 CPU4 attaching sched-domain: domain 0: span 0-7 level CPU groups: 4 5 6 7 0 1 2 3 CPU5 attaching sched-domain: domain 0: span 0-7 level CPU groups: 5 6 7 0 1 2 3 4 CPU6 attaching sched-domain: domain 0: span 0-7 level CPU groups: 6 7 0 1 2 3 4 5 CPU7 attaching sched-domain: domain 0: span 0-7 level CPU groups: 7 0 1 2 3 4 5 6 Grant table initialized regulator: core version 0.5 Time: 19:42:53 Date: 11/29/10 NET: Registered protocol family 16 alloc irq_desc for 2263 on node 0 alloc kstat_irqs on node 0 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered sync cpu 0 get result 1 max_id 7 sync cpu 1 get result 1 max_id 7 sync cpu 2 get result 1 max_id 7 sync cpu 3 get result 1 max_id 7 sync cpu 4 get result 1 max_id 7 sync cpu 5 get result 1 max_id 7 sync cpu 6 get result 1 max_id 7 sync cpu 7 get result 1 max_id 7 alloc irq_desc for 2262 on node 0 alloc kstat_irqs on node 0 PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in E820 PCI: Using MMCONFIG at f8000000 - fbffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ERROR: Unable to locate IOAPIC for GSI 9 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:19.0: reg 10 32bit mmio: [0xd3300000-0xd331ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xd3323000-0xd3323fff] pci 0000:00:19.0: reg 18 io port: [0x4100-0x411f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x40e0-0x40ff] pci 0000:00:1a.1: reg 20 io port: [0x40c0-0x40df] pci 0000:00:1a.2: reg 20 io port: [0x40a0-0x40bf] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd3322000-0xd33223ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0000000-0xf0003fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x4080-0x409f] pci 0000:00:1d.1: reg 20 io port: [0x4060-0x407f] pci 0000:00:1d.2: reg 20 io port: [0x4040-0x405f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd3321000-0xd33213ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f) pci 0000:00:1f.2: reg 10 io port: [0x4128-0x412f] pci 0000:00:1f.2: reg 14 io port: [0x4134-0x4137] pci 0000:00:1f.2: reg 18 io port: [0x4120-0x4127] pci 0000:00:1f.2: reg 1c io port: [0x4130-0x4133] pci 0000:00:1f.2: reg 20 io port: [0x4020-0x403f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd3320000-0xd33207ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xf0004000-0xf00040ff] pci 0000:00:1f.3: reg 20 io port: [0x4000-0x401f] pci 0000:03:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff] pci 0000:03:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff] pci 0000:03:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff] pci 0000:03:00.0: reg 24 io port: [0x3000-0x307f] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff] pci 0000:00:07.0: bridge io port: [0x3000-0x3fff] pci 0000:00:07.0: bridge 32bit mmio: [0xd0000000-0xd2ffffff] pci 0000:00:07.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.0: bridge 32bit mmio: [0xd3200000-0xd32fffff] pci 0000:05:00.0: reg 10 32bit mmio: [0xd3202000-0xd3202fff] pci 0000:05:00.0: supports D1 D2 pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot pci 0000:05:00.0: PME# disabled pci 0000:05:00.1: reg 10 32bit mmio: [0xd3201000-0xd3201fff] pci 0000:05:00.1: supports D1 D2 pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot pci 0000:05:00.1: PME# disabled pci 0000:05:00.2: reg 10 32bit mmio: [0xd3200000-0xd32000ff] pci 0000:05:00.2: supports D1 D2 pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot pci 0000:05:00.2: PME# disabled pci 0000:04:00.0: bridge 32bit mmio: [0xd3200000-0xd32fffff] pci 0000:07:00.0: reg 10 io port: [0x2018-0x201f] pci 0000:07:00.0: reg 14 io port: [0x2024-0x2027] pci 0000:07:00.0: reg 18 io port: [0x2010-0x2017] pci 0000:07:00.0: reg 1c io port: [0x2020-0x2023] pci 0000:07:00.0: reg 20 io port: [0x2000-0x200f] pci 0000:07:00.0: reg 24 32bit mmio: [0xd3100000-0xd31003ff] pci 0000:07:00.0: supports D1 pci 0000:07:00.0: PME# supported from D0 D1 D3hot pci 0000:07:00.0: PME# disabled pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.4: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.4: bridge 32bit mmio: [0xd3100000-0xd31fffff] pci 0000:08:02.0: reg 10 io port: [0x1000-0x101f] pci 0000:08:02.0: supports D1 D2 pci 0000:08:02.1: reg 10 io port: [0x1020-0x1027] pci 0000:08:02.1: supports D1 D2 pci 0000:08:03.0: reg 10 32bit mmio: [0xd3004000-0xd30047ff] pci 0000:08:03.0: reg 14 32bit mmio: [0xd3000000-0xd3003fff] pci 0000:08:03.0: supports D1 D2 pci 0000:08:03.0: PME# supported from D0 D1 D2 D3hot pci 0000:08:03.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff] pci 0000:00:1e.0: bridge 32bit mmio: [0xd3000000-0xd30fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) xen_balloon: Initialising balloon driver with page order 0. last_pfn = 0x25adfe max_arch_pfn = 0x400000000 vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource xen kstop/0 used greatest stack depth: 6408 bytes left pnp: PnP ACPI init ACPI: bus type pnp registered xen: registering gsi 8 triggering 1 polarity 0 xen_allocate_pirq: returning irq 8 for gsi 8 xen: --> irq=8 xen: registering gsi 13 triggering 1 polarity 0 xen_allocate_pirq: returning irq 13 for gsi 13 xen: --> irq=13 pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered system 00:05: ioport range 0x500-0x53f has been reserved system 00:05: ioport range 0x400-0x47f has been reserved system 00:05: ioport range 0x680-0x6ff has been reserved pciback 0000:05:00.0: seizing device pciback 0000:05:00.1: seizing device pciback 0000:05:00.2: seizing device PM-Timer failed consistency check (0x0xffffff) - aborting. pci 0000:03:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: disabled pci 0000:00:01.0: PREFETCH window: disabled pci 0000:00:03.0: PCI bridge, secondary bus 0000:02 pci 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM window: disabled pci 0000:00:03.0: PREFETCH window: disabled pci 0000:03:00.0: BAR 6: can't allocate mem resource [0xf0000000-0xefffffff] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03 pci 0000:00:07.0: IO window: 0x3000-0x3fff pci 0000:00:07.0: MEM window: 0xd0000000-0xd2ffffff pci 0000:00:07.0: PREFETCH window: 0x000000e0000000-0x000000efffffff pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 pci 0000:04:00.0: IO window: disabled pci 0000:04:00.0: MEM window: 0xd3200000-0xd32fffff pci 0000:04:00.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0xd3200000-0xd32fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:06 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: disabled pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07 pci 0000:00:1c.4: IO window: 0x2000-0x2fff pci 0000:00:1c.4: MEM window: 0xd3100000-0xd31fffff pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 pci 0000:00:1e.0: IO window: 0x1000-0x1fff pci 0000:00:1e.0: MEM window: 0xd3000000-0xd30fffff pci 0000:00:1e.0: PREFETCH window: disabled xen: registering gsi 16 triggering 0 polarity 1 alloc irq_desc for 16 on node 0 alloc kstat_irqs on node 0 xen: --> irq=16 pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:03.0: setting latency timer to 64 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:07.0: setting latency timer to 64 xen: registering gsi 17 triggering 0 polarity 1 alloc irq_desc for 17 on node 0 alloc kstat_irqs on node 0 xen: --> irq=17 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:04:00.0: setting latency timer to 64 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 xen: registering gsi 17 triggering 0 polarity 1 xen_allocate_pirq: returning irq 17 for gsi 17 xen: --> irq=17 Already setup the GSI :17 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] pci_bus 0000:03: resource 1 mem: [0xd0000000-0xd2ffffff] pci_bus 0000:03: resource 2 pref mem [0xe0000000-0xefffffff] pci_bus 0000:04: resource 1 mem: [0xd3200000-0xd32fffff] pci_bus 0000:05: resource 1 mem: [0xd3200000-0xd32fffff] pci_bus 0000:07: resource 0 io: [0x2000-0x2fff] pci_bus 0000:07: resource 1 mem: [0xd3100000-0xd31fffff] pci_bus 0000:08: resource 0 io: [0x1000-0x1fff] pci_bus 0000:08: resource 1 mem: [0xd3000000-0xd30fffff] pci_bus 0000:08: resource 3 io: [0x00-0xffff] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 10, 4718592 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:03:00.0: Boot video device pci 0000:04:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled Trying to unpack rootfs image as initramfs... Freeing initrd memory: 266256k freed DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config PCI-DMA: Using software bounce buffering for IO (SWIOTLB) DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 DMA: software IO TLB at phys 0x20000000 - 0x24000000 audit: initializing netlink socket (disabled) type=2000 audit(1291059774.146:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 13622 SELinux: Registering netfilter hooks cryptomgr_test used greatest stack depth: 5720 bytes left cryptomgr_test used greatest stack depth: 5656 bytes left alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) alloc irq_desc for 2261 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:01.0: setting latency timer to 64 alloc irq_desc for 2260 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:03.0: setting latency timer to 64 alloc irq_desc for 2259 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:07.0: setting latency timer to 64 alloc irq_desc for 2258 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 2257 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 2256 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:1c.4: setting latency timer to 64 aer 0000:00:01.0:pcie02: service driver aer loaded aer 0000:00:03.0:pcie02: service driver aer loaded aer 0000:00:07.0:pcie02: service driver aer loaded pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 pci-stub: invalid id string "" input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] Event-channel device installed. xen: registering gsi 18 triggering 0 polarity 1 alloc irq_desc for 18 on node 0 alloc kstat_irqs on node 0 xen: --> irq=18 pciback 0000:05:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pciback 0000:05:00.2: PCI INT C disabled xen: registering gsi 17 triggering 0 polarity 1 xen_allocate_pirq: returning irq 17 for gsi 17 xen: --> irq=17 Already setup the GSI :17 pciback 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pciback 0000:05:00.1: PCI INT B disabled xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 pciback 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pciback 0000:05:00.0: PCI INT A disabled registering netback alloc irq_desc for 2255 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2254 on node 0 alloc kstat_irqs on node 0 hpet_acpi_add: no address or irqs in _CRS Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 ahci 0000:00:1f.2: version 3.0 xen: registering gsi 19 triggering 0 polarity 1 alloc irq_desc for 19 on node 0 alloc kstat_irqs on node 0 xen: --> irq=19 ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 alloc irq_desc for 2253 on node 0 alloc kstat_irqs on node 0 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 2253 ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 2253 ata3: SATA max UDMA/133 abar m2048@0xd3320000 port 0xd3320200 irq 2253 ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 2253 ata5: SATA max UDMA/133 abar m2048@0xd3320000 port 0xd3320300 irq 2253 ata6: SATA max UDMA/133 abar m2048@0xd3320000 port 0xd3320380 irq 2253 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver xen: registering gsi 18 triggering 0 polarity 1 xen_allocate_pirq: returning irq 18 for gsi 18 xen: --> irq=18 Already setup the GSI :18 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd3322000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32.26 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected xen: registering gsi 23 triggering 0 polarity 1 alloc irq_desc for 23 on node 0 alloc kstat_irqs on node 0 xen: --> irq=23 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd3321000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32.26 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040e0 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32.26 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xen: registering gsi 21 triggering 0 polarity 1 alloc irq_desc for 21 on node 0 alloc kstat_irqs on node 0 xen: --> irq=21 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32.26 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected xen: registering gsi 19 triggering 0 polarity 1 xen_allocate_pirq: returning irq 19 for gsi 19 xen: --> irq=19 Already setup the GSI :19 uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x000040a0 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32.26 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected xen: registering gsi 23 triggering 0 polarity 1 xen_allocate_pirq: returning irq 23 for gsi 23 xen: --> irq=23 Already setup the GSI :23 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.32.26 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected xen: registering gsi 19 triggering 0 polarity 1 xen_allocate_pirq: returning irq 19 for gsi 19 xen: --> irq=19 Already setup the GSI :19 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.32.26 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected xen: registering gsi 18 triggering 0 polarity 1 xen_allocate_pirq: returning irq 18 for gsi 18 xen: --> irq=18 Already setup the GSI :18 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.32.26 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram md: raid1 personality registered for level 1 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 2:910:749 tty ttyS0: hash matches rtc_cmos 00:02: setting system clock to 2010-11-29 19:42:54 UTC (1291059774) Initalizing network drop monitor service ata5: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) usb 8-2: new full speed USB device using uhci_hcd and address 2 usb 8-2: New USB device found, idVendor=05ac, idProduct=1002 usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 8-2: Product: Hub in Apple Extended USB Keyboard usb 8-2: Manufacturer: Alps Electric usb 8-2: configuration #1 chosen from 1 choice hub 8-2:1.0: USB hub found hub 8-2:1.0: 3 ports detected ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATAPI: HL-DT-ST DVDRAM GH22LS50, TL02, max UDMA/100 ata1.00: ATA-8: WDC WD5001AALS-00E3A0, 05.01D05, max UDMA/133 ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata4.00: configured for UDMA/100 ata2.00: ATA-8: WDC WD5001AALS-00E3A0, 05.01D05, max UDMA/133 ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 ata2.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD5001AALS-0 05.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 1:0:0:0: Direct-Access ATA WDC WD5001AALS-0 05.0 PQ: 0 ANSI: 5 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) sda: sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sda1 sda2 scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22LS50 TL02 PQ: 0 ANSI: 5 sda3 sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sr 3:0:0:0: Attached scsi generic sg2 type 5 sdb1 sdb2 sdb3 sd 1:0:0:0: [sdb] Attached SCSI disk Freeing unused kernel memory: 3376k freed Write protecting the kernel read-only data: 6924k busybox used greatest stack depth: 5440 bytes left modprobe used greatest stack depth: 5232 bytes left exe used greatest stack depth: 5032 bytes left exe used greatest stack depth: 4944 bytes left usb 8-2.1: new full speed USB device using uhci_hcd and address 3 e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. xen: registering gsi 20 triggering 0 polarity 1 alloc irq_desc for 20 on node 0 alloc kstat_irqs on node 0 xen: --> irq=20 e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 alloc irq_desc for 2252 on node 0 alloc kstat_irqs on node 0 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 pata_marvell 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_marvell 0000:07:00.0: setting latency timer to 64 scsi6 : pata_marvell scsi7 : pata_marvell ata7: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 16 ata8: PATA max UDMA/133 cmd 0x2010 ctl 0x2020 bmdma 0x2008 irq 16 scsi_id used greatest stack depth: 4144 bytes left usb 8-2.1: New USB device found, idVendor=05ac, idProduct=0204 usb 8-2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 usb 8-2.1: Product: Apple Extended USB Keyboard usb 8-2.1: Manufacturer: Alps Electric usb 8-2.1: configuration #1 chosen from 1 choice input: Alps Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.1/8-2.1:1.0/input/input3 generic-usb 0003:05AC:0204.0001: input,hidraw0: USB HID v1.10 Keyboard [Alps Electric Apple Extended USB Keyboard] on usb-0000:00:1d.2-2.1/input0 input: Alps Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.1/8-2.1:1.1/input/input4 generic-usb 0003:05AC:0204.0002: input,hidraw1: USB HID v1.10 Device [Alps Electric Apple Extended USB Keyboard] on usb-0000:00:1d.2-2.1/input1 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:f3:b1:4f 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: ffffff-0ff blkid used greatest stack depth: 3968 bytes left scsi_id used greatest stack depth: 3504 bytes left xen: registering gsi 19 triggering 0 polarity 1 xen_allocate_pirq: returning irq 19 for gsi 19 xen: --> irq=19 Already setup the GSI :19 firewire_ohci 0000:08:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 firewire_ohci: Added fw-ohci device 0000:08:03.0, OHCI version 1.10 md: md0 stopped. md: bind md: bind raid1: raid set md0 active with 2 out of 2 mirrors md0: detected capacity change from 0 to 7997476864 md0: unknown partition table md: md1 stopped. md: bind md: bind raid1: raid set md1 active with 2 out of 2 mirrors md1: detected capacity change from 0 to 490099040256 md1: unknown partition table firewire_core: created device fw0: GUID 00902700026880b3, S400 md: md2 stopped. md: bind md: bind raid1: raid set md2 active with 2 out of 2 mirrors md2: detected capacity change from 0 to 2006962176 md2: unknown partition table PM: Starting manual resume from disk PM: Resume from partition 9:2 PM: Checking hibernation image. PM: Error -22 checking image file PM: Resume from disk failed. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. grep used greatest stack depth: 3248 bytes left udev[465]: starting version 164 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: WMI: Mapper loaded input: PC Speaker as /devices/platform/pcspkr/input/input5 gameport: EMU10K1 is pci0000:08:02.1/gameport0, io 0x1020, speed 651kHz xen: registering gsi 18 triggering 0 polarity 1 xen_allocate_pirq: returning irq 18 for gsi 18 xen: --> irq=18 Already setup the GSI :18 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 Error: Driver 'pcspkr' is already registered, aborting... xen: registering gsi 22 triggering 0 polarity 1 alloc irq_desc for 22 on node 0 alloc kstat_irqs on node 0 xen: --> irq=22 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 xen: registering gsi 18 triggering 0 polarity 1 xen_allocate_pirq: returning irq 18 for gsi 18 xen: --> irq=18 Already setup the GSI :18 EMU10K1_Audigy 0000:08:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 Adding 1959912k swap on /dev/md2. Priority:-1 extents:1 across:1959912k EXT3 FS on md0, internal journal rc used greatest stack depth: 2960 bytes left xenfs: Unable to register filesystem! ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:491 sysfs_add_one+0xd9/0xf3() Hardware name: sysfs: cannot create duplicate filename '/devices/virtual/misc/xen!evtchn' Modules linked in: xen_evtchn(+) firewire_sbp2 snd_hda_codec_realtek snd_emu10k1 snd_rawmidi snd_ac97_codec snd_hda_intel ac97_bus snd_hda_codec snd_seq_device snd_util_mem i2c_i801 snd_pcm snd_hwdep snd_timer i2c_core emu10k1_gp pcspkr snd serio_raw gameport soundcore wmi snd_page_alloc shpchp firewire_ohci ata_generic pata_acpi firewire_core crc_itu_t pata_marvell e1000e [last unloaded: scsi_wait_scan] Pid: 1140, comm: modprobe Not tainted 2.6.32.26 #2 Call Trace: [] warn_slowpath_common+0x7c/0x94 [] warn_slowpath_fmt+0x41/0x43 [] sysfs_add_one+0xd9/0xf3 [] create_dir+0x5d/0x8d [] ? xen_restore_fl_direct_end+0x0/0x1 [] sysfs_create_dir+0x3d/0x50 [] ? _spin_unlock+0x2b/0x30 [] kobject_add_internal+0x11c/0x1f9 [] ? check_events+0x12/0x20 [] kobject_add_varg+0x41/0x50 [] kobject_add+0x64/0x66 [] ? mutex_unlock+0xe/0x10 [] ? get_device_parent+0x10a/0x184 [] device_add+0xe9/0x574 [] ? __spin_lock_init+0x31/0x53 [] device_register+0x1e/0x22 [] device_create_vargs+0x96/0xc7 [] device_create+0x31/0x33 [] ? mutex_lock_nested+0x3e/0x43 [] misc_register+0xd5/0x124 [] evtchn_init+0x5d/0x7e [xen_evtchn] [] ? evtchn_init+0x0/0x7e [xen_evtchn] [] do_one_initcall+0x72/0x18a [] sys_init_module+0xd8/0x23a [] system_call_fastpath+0x16/0x1b ---[ end trace 43c669d5c7fe4068 ]--- kobject_add_internal failed for xen!evtchn with -EEXIST, don't try to register things with the same name in the same directory. Pid: 1140, comm: modprobe Tainted: G W 2.6.32.26 #2 Call Trace: [] kobject_add_internal+0x1ad/0x1f9 [] ? check_events+0x12/0x20 [] kobject_add_varg+0x41/0x50 [] kobject_add+0x64/0x66 [] ? mutex_unlock+0xe/0x10 [] ? get_device_parent+0x10a/0x184 [] device_add+0xe9/0x574 [] ? __spin_lock_init+0x31/0x53 [] device_register+0x1e/0x22 [] device_create_vargs+0x96/0xc7 [] device_create+0x31/0x33 [] ? mutex_lock_nested+0x3e/0x43 [] misc_register+0xd5/0x124 [] evtchn_init+0x5d/0x7e [xen_evtchn] [] ? evtchn_init+0x0/0x7e [xen_evtchn] [] do_one_initcall+0x72/0x18a [] sys_init_module+0xd8/0x23a [] system_call_fastpath+0x16/0x1b Could not register /dev/misc/evtchn alloc irq_desc for 2251 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2250 on node 0 alloc kstat_irqs on node 0 XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state Bridge firewalling registered NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): peth0: link is not ready e1000e: peth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready device peth0 entered promiscuous mode eth0: port 1(peth0) entering forwarding state peth0: no IPv6 routers present eth0: no IPv6 routers present alloc irq_desc for 2249 on node 0 alloc kstat_irqs on node 0 device vif1.0 entered promiscuous mode eth0: port 2(vif1.0) entering forwarding state physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. eth0: port 2(vif1.0) entering disabled state eth0: port 2(vif1.0) entering disabled state physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.