Hi Bruce,
I tripped over the same warning trying to solve my freezes.
Jan Beulich has posted a patch which is not in xen-unstable yet: [Xen-devel]
[PATCH] x86/msi: fix inverted masks in c/s 22182:68cc3c514a0a
Signed-off-by: Jan Beulich <jbeulich@xxxxxxxxxx>
--- a/xen/arch/x86/msi.c
+++ b/xen/arch/x86/msi.c
@@ -549,14 +549,14 @@ static u64 read_pci_mem_bar(u8 bus, u8 s
return 0;
if ( (addr & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
PCI_BASE_ADDRESS_MEM_TYPE_64 )
{
- addr &= ~PCI_BASE_ADDRESS_MEM_MASK;
+ addr &= PCI_BASE_ADDRESS_MEM_MASK;
if ( ++bir >= limit )
return 0;
return addr |
((u64)pci_conf_read32(bus, slot, func,
PCI_BASE_ADDRESS_0 + bir * 4) << 32);
}
- return addr & ~PCI_BASE_ADDRESS_MEM_MASK;
+ return addr & PCI_BASE_ADDRESS_MEM_MASK;
}
/**
That fixes the warn, but my machine still keeps freezing non the less.
(but it also does so with pci=nomsi so it's not msi specific in my case)
--
Sander
Saturday, October 16, 2010, 6:14:17 PM, you wrote:
> On Mon, Oct 11, 2010 at 2:05 PM, Bruce Edge <bruce.edge@xxxxxxxxx> wrote:
>> On Mon, Oct 11, 2010 at 10:12 AM, Gianni Tedesco
>> <gianni.tedesco@xxxxxxxxxx> wrote:
>>> On Fri, 2010-10-08 at 10:33 +0100, Gianni Tedesco wrote:
>>>> Hi,
>>>>
>>>> I've been trying to boot stefano's minimal dom0 kernel from
>>>> git://xenbits.xen.org/people/sstabellini/linux-pvhvm.git
>>>> 2.6.36-rc1-initial-domain-v2+pat
>>>>
>>>> On xen-unstable, I get the following WARN_ON()'s from Xen when bringing
>>>> up the NIC's, then the machine hangs forever when trying to login either
>>>> over serial or NIC.
>>>>
>>>> (XEN) Xen WARN at msi.c:649
>>
>> I get the same Xen WARN messages using the current pvops/xen-next with
>> xen-unstable, here's the complete list for one boot, grep'd for WARN:
>>
>> (XEN) Xen WARN at msi.c:636
>> (XEN) Xen WARN at msi.c:649
>> (XEN) Xen WARN at msi.c:636
>> (XEN) Xen WARN at msi.c:649
>> (XEN) Xen WARN at msi.c:656
>> (XEN) Xen WARN at msi.c:636
>> (XEN) Xen WARN at msi.c:649
>> (XEN) Xen WARN at msi.c:636
>> (XEN) Xen WARN at msi.c:649
>> (XEN) Xen WARN at msi.c:656
>> (XEN) Xen WARN at msi.c:636
>> (XEN) Xen WARN at msi.c:649
>> (XEN) Xen WARN at msi.c:656
>> (XEN) Xen WARN at msi.c:636
>> (XEN) Xen WARN at msi.c:649
>> (XEN) 0000000080287db8 0(XEN) Xen WARN at msi.c:636
>> (XEN) Xen WARN at msi.c:649
>> (XEN) Xen WARN at msi.c:656
>>
>> The complete boot seq is attached.
>>
>> I do get a login at the end of the boot seq though.
>> My situation goes pear shaped when I try start a pv domU. The dom0
>> locks up after printing this on the console:
>>
>> (XEN) tmem: all pools frozen for all domains
>> (XEN) tmem: all pools thawed for all domains
>> (XEN) tmem: all pools frozen for all domains
>> (XEN) tmem: all pools thawed for all domains
>> mapping kernel into physical memory
>> about to get started...
>>
>> then prints these once a minute:
>> [ 589.490894] BUG: soft lockup - CPU#0 stuck for 61s! [swapper:0]
>>
>> The xen console is still active and I can generate a diag dump, also
>> attached.
>>
>> This dom0 lockup behavior started with pv-ops 2.6.32.21, all the way
>> to .24, rendering the later pvops kernels unusable for dom0.
>> The 2.6.32.18 kernel is the last one that functioned as a dom0.
>>
>> This behavior is consistent on platforms, HP proliant 380DL G6, and
>> G7, as well as i7 supermicros.
>>
>> -Bruce
>>
>>>
>>> Hmm so this appears not to be an issue with XCP kernel, in that case I
>>> get the warnings but everything still works fine.
>>>
>>> I will investigate further when I have some time.
>>>
>>> Gianni
>>>
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@xxxxxxxxxxxxxxxxxxx
>>> http://lists.xensource.com/xen-devel
>>>
>>
> The latest xen-unstable, 22240 has the same " (XEN) Xen WARN at
> msi.c:636 " messages with associated stack traces.
> I spent a little more time working with this version, and except for
> these disconcerting messages, which do look like they are initiated by
> the ethernet card discovery, the system appears functional.
> In all cases the first occurrence is immediately after the NIC discovery:
> e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
> | e1000e: Copyright (c) 1999-2008 Intel Corporation.
> | xen: registering gsi 16 triggering 0 polarity 1
> | xen_allocate_pirq: returning irq 16 for gsi 16
> xen: --> irq=16
> Already setup the GSI :16
> e1000e 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> e1000e 0000:06:00.0: setting latency timer to 64
> alloc irq_desc for 493 on node 0
> alloc kstat_irqs on node 0
> (XEN) Xen WARN at msi.c:636
> (XEN) ----[ Xen-4.1-unstable x86_64 debug=y Not tainted ]----
> ....
> In case it's a NIC specific issue, I'm seeing it with both
> 06:00.0 Ethernet controller: Intel Corporation 82574L Gigabit
> Network Connection
> and
> 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme II
> BCM5709 Gigabit Ethernet (rev 20)
> NICs
> -Bruce
--
Best regards,
Sander mailto:linux@xxxxxxxxxxxxxx
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home