Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32.17-157.xendom0.fc12.x86_64 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #1 SMP Sat Aug 7 15:26:59 UTC 2010 Command line: ro root=UUID=fcb47974-dd00-4990-bcee-e2b50a0f184b 3 earlyprintk=xen initcall_debug debug loglevel=10 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls xen_release_chunk: looking at area pfn e0000-eff7a: 65402 pages freed released 65402 pages of unused memory BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009f000 (usable) Xen: 000000000009f000 - 0000000000100000 (reserved) Xen: 0000000000100000 - 00000000df66d800 (usable) Xen: 00000000df66d800 - 00000000e0000000 (reserved) Xen: 00000000f8000000 - 00000000fc000000 (reserved) Xen: 00000000fec00000 - 00000000fec10000 (reserved) Xen: 00000000fed18000 - 00000000fed1c000 (reserved) Xen: 00000000fed20000 - 00000000fed90000 (reserved) Xen: 00000000feda0000 - 00000000feda6000 (reserved) Xen: 00000000fee00000 - 00000000fee10000 (reserved) Xen: 00000000ffe00000 - 0000000100000000 (reserved) bootconsole [xenboot0] enabled DMI 2.4 present. last_pfn = 0xdf66d max_arch_pfn = 0x400000000 x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000df66d000 0000000000 - 00df66d000 page 4k kernel direct mapping tables up to df66d000 @ 100000-801000 RAMDISK: 01a6f000 - 03b37e00 ACPI: RSDP 00000000000fbc60 00024 (v02 DELL ) ACPI: XSDT 00000000df66f200 00064 (v01 DELL M08 27D80A10 ASL 00000061) ACPI: FACP 00000000df66f09c 000F4 (v04 DELL M08 27D80A10 ASL 00000061) ACPI: DSDT 00000000df66f800 05477 (v02 INT430 SYSFexxx 00001001 INTL 20050624) ACPI: FACS 00000000df67e000 00040 ACPI: HPET 00000000df66f300 00038 (v01 DELL M08 00000001 ASL 00000061) ACPI: APIC 00000000df66f400 00068 (v01 DELL M08 27D80A10 ASL 00000047) ACPI: MCFG 00000000df66f3c0 0003E (v16 DELL M08 27D80A10 ASL 00000061) ACPI: SLIC 00000000df66f49c 00176 (v01 DELL M08 27D80A10 ASL 00000061) ACPI: OSFR 00000000df66ea00 0002C (v01 DELL M08 27D80A10 ASL 00000061) ACPI: BOOT 00000000df66efc0 00028 (v01 DELL M08 27D80A10 ASL 00000061) ACPI: SSDT 00000000df66d97e 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-00000000df66d000 Bootmem setup node 0 0000000000000000-00000000df66d000 NODE_DATA [0000000000008000 - 000000000001dfff] bootmap [000000000001e000 - 0000000000039ecf] pages 1c (8 early reservations) ==> bootmem [0000000000 - 00df66d000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [00042b9000 - 00042de000] XEN PAGETABLES ==> [00042b9000 - 00042de000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #3 [0001000000 - 0001a4efa8] TEXT DATA BSS ==> [0001000000 - 0001a4efa8] #4 [0001a6f000 - 0003b37e00] RAMDISK ==> [0001a6f000 - 0003b37e00] #5 [0003b38000 - 00042b9000] XEN START INFO ==> [0003b38000 - 00042b9000] #6 [0001a4f000 - 0001a4f1e8] BRK ==> [0001a4f000 - 0001a4f1e8] #7 [0000100000 - 00007d9000] PGTABLE ==> [0000100000 - 00007d9000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000df66d On node 0 totalpages: 914956 DMA zone: 56 pages used for memmap DMA zone: 1756 pages reserved DMA zone: 2187 pages, LIFO batch:0 DMA32 zone: 12455 pages used for memmap DMA32 zone: 898502 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ERROR: Unable to locate IOAPIC for GSI 2 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ERROR: Unable to locate IOAPIC for GSI 9 Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 256 PM: Registered nosave memory: 000000000009f000 - 0000000000100000 Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) Booting paravirtualized kernel on Xen Xen version: 3.4.3 (preserve-AD) (dom0) NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 30 pages/cpu @ffff880004314000 s90392 r8192 d24296 u122880 pcpu-alloc: s90392 r8192 d24296 u122880 alloc=30*4096 pcpu-alloc: [0] 0 [0] 1 trying to map vcpu_info 0 at ffff88000431f020, mfn 11431f, offset 32 cpu 0 using vcpu_info at ffff88000431f020 trying to map vcpu_info 1 at ffff88000433d020, mfn 11433d, offset 32 cpu 1 using vcpu_info at ffff88000433d020 Xen: using vcpu_info placement Built 1 zonelists in Node order, mobility grouping on. Total pages: 900689 Policy zone: DMA32 Kernel command line: ro root=UUID=fcb47974-dd00-4990-bcee-e2b50a0f184b 3 earlyprintk=xen initcall_debug debug loglevel=10 PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 DMA: Placing 64MB software IO TLB between ffff8800077fa000 - ffff88000b7fa000 DMA: software IO TLB at phys 0x77fa000 - 0xb7fa000 xen_swiotlb_fixup: buf=ffff8800077fa000 size=67108864 xen_swiotlb_fixup: buf=ffff88000b85a000 size=32768 Memory: 3483996k/3660212k available (4488k kernel code, 388k absent, 175828k reserved, 3707k data, 940k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:768 xen: --> irq=0 xen: --> irq=1 xen: --> irq=2 xen: --> irq=3 xen: --> irq=4 xen: --> irq=5 xen: --> irq=6 xen: --> irq=7 xen: --> irq=8 xen: --> irq=9 xen: --> irq=10 xen: --> irq=11 xen: --> irq=12 xen: --> irq=13 xen: --> irq=14 xen: --> irq=15 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 xen: registering gsi 9 triggering 0 polarity 0 xen_allocate_pirq: returning irq 9 for gsi 9 xen: --> irq=9 Already setup the GSI :9 xen: acpi sci 9 Console: colour VGA+ 80x25 console [tty0] enabled, bootconsole disabled allocated 36700160 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Xen: using vcpuop timer interface installing Xen timer for CPU 0 alloc irq_desc for 767 on node 0 alloc kstat_irqs on node 0 Detected 2394.076 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.15 BogoMIPS (lpj=2394076) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only. SMP alternatives: switching to UP code ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 23211 entries in 92 pages alloc irq_desc for 766 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 765 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 764 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 763 on node 0 alloc kstat_irqs on node 0 calling migration_init+0x0/0x5a @ 1 initcall migration_init+0x0/0x5a returned 0 after 0 usecs calling spawn_ksoftirqd+0x0/0x59 @ 1 initcall spawn_ksoftirqd+0x0/0x59 returned 0 after 976 usecs calling init_call_single_data+0x0/0x8e @ 1 initcall init_call_single_data+0x0/0x8e returned 0 after 0 usecs calling spawn_softlockup_task+0x0/0x75 @ 1 initcall spawn_softlockup_task+0x0/0x75 returned 0 after 0 usecs calling relay_init+0x0/0x14 @ 1 initcall relay_init+0x0/0x14 returned 0 after 0 usecs calling tracer_alloc_buffers+0x0/0x1fd @ 1 initcall tracer_alloc_buffers+0x0/0x1fd returned 0 after 0 usecs calling init_trace_printk+0x0/0x12 @ 1 initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs calling trace_workqueue_early_init+0x0/0x117 @ 1 initcall trace_workqueue_early_init+0x0/0x117 returned 0 after 0 usecs installing Xen timer for CPU 1 alloc irq_desc for 762 on node 0 alloc kstat_irqs on node 0 SMP alternatives: switching to SMP code alloc irq_desc for 761 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 760 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 759 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 758 on node 0 alloc kstat_irqs on node 0 Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU 1/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Brought up 2 CPUs sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=592 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=800 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=5976 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 devtmpfs: initialized calling init_mmap_min_addr+0x0/0x26 @ 1 initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1 initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs calling net_ns_init+0x0/0xe0 @ 1 initcall net_ns_init+0x0/0xe0 returned 0 after 0 usecs calling e820_mark_nvs_memory+0x0/0x40 @ 1 initcall e820_mark_nvs_memory+0x0/0x40 returned 0 after 0 usecs calling cpufreq_tsc+0x0/0x28 @ 1 initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs calling pci_reboot_init+0x0/0x14 @ 1 initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs calling init_lapic_sysfs+0x0/0x2d @ 1 initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 usecs calling alloc_frozen_cpus+0x0/0xd @ 1 initcall alloc_frozen_cpus+0x0/0xd returned 0 after 0 usecs calling sysctl_init+0x0/0x16 @ 1 initcall sysctl_init+0x0/0x16 returned 0 after 0 usecs calling ksysfs_init+0x0/0xc0 @ 1 initcall ksysfs_init+0x0/0xc0 returned 0 after 0 usecs calling async_init+0x0/0x60 @ 1 initcall async_init+0x0/0x60 returned 0 after 976 usecs calling init_jiffies_clocksource+0x0/0x12 @ 1 initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs calling pm_init+0x0/0x60 @ 1 initcall pm_init+0x0/0x60 returned 0 after 0 usecs calling pm_disk_init+0x0/0x19 @ 1 initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs calling swsusp_header_init+0x0/0x31 @ 1 initcall swsusp_header_init+0x0/0x31 returned 0 after 0 usecs calling init_zero_pfn+0x0/0x35 @ 1 initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs calling filelock_init+0x0/0x2e @ 1 initcall filelock_init+0x0/0x2e returned 0 after 0 usecs calling init_misc_binfmt+0x0/0x41 @ 1 initcall init_misc_binfmt+0x0/0x41 returned 0 after 0 usecs calling init_script_binfmt+0x0/0x14 @ 1 initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x14 @ 1 initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs calling init_compat_elf_binfmt+0x0/0x14 @ 1 initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs calling debugfs_init+0x0/0x5c @ 1 initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs calling securityfs_init+0x0/0x53 @ 1 initcall securityfs_init+0x0/0x53 returned 0 after 0 usecs calling random32_init+0x0/0xd8 @ 1 initcall random32_init+0x0/0xd8 returned 0 after 0 usecs calling __gnttab_init+0x0/0x26 @ 1 Grant table initialized initcall __gnttab_init+0x0/0x26 returned 0 after 976 usecs calling regulator_init+0x0/0x2e @ 1 regulator: core version 0.5 initcall regulator_init+0x0/0x2e returned 0 after 0 usecs calling early_resume_init+0x0/0x1a3 @ 1 Time: 21:09:48 Date: 08/16/10 initcall early_resume_init+0x0/0x1a3 returned 0 after 0 usecs calling cpufreq_core_init+0x0/0x9b @ 1 initcall cpufreq_core_init+0x0/0x9b returned 0 after 0 usecs calling cpuidle_init+0x0/0x40 @ 1 initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs calling sock_init+0x0/0x5e @ 1 initcall sock_init+0x0/0x5e returned 0 after 976 usecs calling net_inuse_init+0x0/0x26 @ 1 initcall net_inuse_init+0x0/0x26 returned 0 after 0 usecs calling netpoll_init+0x0/0x31 @ 1 initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs calling netlink_proto_init+0x0/0x143 @ 1 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x143 returned 0 after 0 usecs calling bdi_class_init+0x0/0x41 @ 1 initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs calling kobject_uevent_init+0x0/0x54 @ 1 initcall kobject_uevent_init+0x0/0x54 returned 0 after 976 usecs calling pcibus_class_init+0x0/0x19 @ 1 initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs calling pci_driver_init+0x0/0x12 @ 1 initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs calling backlight_class_init+0x0/0x5d @ 1 initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs calling xenbus_init+0x0/0x2ee @ 1 alloc irq_desc for 757 on node 0 alloc kstat_irqs on node 0 initcall xenbus_init+0x0/0x2ee returned 0 after 976 usecs calling tty_class_init+0x0/0x38 @ 1 initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs calling vtconsole_class_init+0x0/0xc2 @ 1 initcall vtconsole_class_init+0x0/0xc2 returned 0 after 0 usecs calling register_node_type+0x0/0x46 @ 1 initcall register_node_type+0x0/0x46 returned 0 after 0 usecs calling amd_postcore_init+0x0/0x77 @ 1 initcall amd_postcore_init+0x0/0x77 returned 0 after 0 usecs calling arch_kdebugfs_init+0x0/0x258 @ 1 initcall arch_kdebugfs_init+0x0/0x258 returned 0 after 0 usecs calling mtrr_if_init+0x0/0x61 @ 1 initcall mtrr_if_init+0x0/0x61 returned 0 after 0 usecs calling ffh_cstate_init+0x0/0x2a @ 1 initcall ffh_cstate_init+0x0/0x2a returned 0 after 0 usecs calling arch_init_ftrace_syscalls+0x0/0xb6 @ 1 initcall arch_init_ftrace_syscalls+0x0/0xb6 returned 0 after 976 usecs calling acpi_pci_init+0x0/0x5c @ 1 ACPI: bus type pci registered initcall acpi_pci_init+0x0/0x5c returned 0 after 0 usecs calling register_xen_pci_notifier+0x0/0x24 @ 1 initcall register_xen_pci_notifier+0x0/0x24 returned 0 after 0 usecs calling setup_vcpu_hotplug_event+0x0/0x22 @ 1 initcall setup_vcpu_hotplug_event+0x0/0x22 returned 0 after 0 usecs calling dmi_id_init+0x0/0x319 @ 1 initcall dmi_id_init+0x0/0x319 returned 0 after 0 usecs calling dma_bus_init+0x0/0x3f @ 1 initcall dma_bus_init+0x0/0x3f returned 0 after 0 usecs calling dma_channel_table_init+0x0/0x116 @ 1 initcall dma_channel_table_init+0x0/0x116 returned 0 after 0 usecs calling pci_arch_init+0x0/0x60 @ 1 PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in E820 PCI: Using MMCONFIG at f8000000 - fbffffff PCI: Using configuration type 1 for base access initcall pci_arch_init+0x0/0x60 returned 0 after 10740 usecs calling topology_init+0x0/0x9d @ 1 initcall topology_init+0x0/0x9d returned 0 after 976 usecs calling mtrr_init_finialize+0x0/0x3d @ 1 initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs calling param_sysfs_init+0x0/0x247 @ 1 initcall param_sysfs_init+0x0/0x247 returned 0 after 976 usecs calling pm_sysrq_init+0x0/0x1e @ 1 initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 usecs calling audit_watch_init+0x0/0x2f @ 1 initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs calling init_slow_work+0x0/0x6f @ 1 initcall init_slow_work+0x0/0x6f returned 0 after 0 usecs calling default_bdi_init+0x0/0xb1 @ 1 initcall default_bdi_init+0x0/0xb1 returned 0 after 976 usecs calling init_bio+0x0/0x101 @ 1 bio: create slab at 0 initcall init_bio+0x0/0x101 returned 0 after 0 usecs calling fsnotify_init+0x0/0x12 @ 1 initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs calling fsnotify_notification_init+0x0/0xf0 @ 1 initcall fsnotify_notification_init+0x0/0xf0 returned 0 after 0 usecs calling cryptomgr_init+0x0/0x12 @ 1 initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs calling blk_settings_init+0x0/0x2a @ 1 initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs calling blk_ioc_init+0x0/0x2a @ 1 initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs calling blk_softirq_init+0x0/0x6e @ 1 initcall blk_softirq_init+0x0/0x6e returned 0 after 0 usecs calling blk_iopoll_setup+0x0/0x6e @ 1 initcall blk_iopoll_setup+0x0/0x6e returned 0 after 0 usecs calling genhd_device_init+0x0/0x7b @ 1 initcall genhd_device_init+0x0/0x7b returned 0 after 976 usecs calling blk_dev_integrity_init+0x0/0x2a @ 1 initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 usecs calling pci_slot_init+0x0/0x4b @ 1 initcall pci_slot_init+0x0/0x4b returned 0 after 0 usecs calling fbmem_init+0x0/0x98 @ 1 initcall fbmem_init+0x0/0x98 returned 0 after 0 usecs calling acpi_init+0x0/0x12f @ 1 ERROR: Unable to locate IOAPIC for GSI 9 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing initcall acpi_init+0x0/0x12f returned 0 after 72254 usecs calling dock_init+0x0/0x8d @ 1 ACPI: No dock devices found. initcall dock_init+0x0/0x8d returned 0 after 0 usecs calling acpi_pci_root_init+0x0/0x28 @ 1 ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff] pci 0000:00:02.0: reg 20 io port: [0xeff8-0xefff] pci 0000:00:02.1: reg 10 64bit mmio: [0xfeb00000-0xfebfffff] pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f] pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f] pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf] pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7] pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb] pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7] pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb] pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe9fb800-0xfe9fbfff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe9fb700-0xfe9fb7ff] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df] pci 0000:09:00.0: reg 10 64bit mmio: [0xfe8fc000-0xfe8fffff] pci 0000:09:00.0: reg 18 io port: [0xde00-0xdeff] pci 0000:09:00.0: supports D1 D2 pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:09:00.0: PME# disabled pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff] pci 0000:0b:00.0: reg 10 64bit mmio: [0xfe7fe000-0xfe7fffff] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold pci 0000:0b:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0xfe700000-0xfe7fffff] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe400000-0xfe6fffff] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf0000000-0xf01fffff] pci 0000:02:09.0: reg 10 32bit mmio: [0xfe3ff800-0xfe3fffff] pci 0000:02:09.0: supports D1 D2 pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:09.0: PME# disabled pci 0000:02:09.1: reg 10 32bit mmio: [0xfe3ff500-0xfe3ff5ff] pci 0000:02:09.1: supports D1 D2 pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:09.1: PME# disabled pci 0000:02:09.2: reg 10 32bit mmio: [0xfe3ff600-0xfe3ff6ff] pci 0000:02:09.2: supports D1 D2 pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:09.2: PME# disabled pci 0000:02:09.3: reg 10 32bit mmio: [0xfe3ff700-0xfe3ff7ff] pci 0000:02:09.3: supports D1 D2 pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:09.3: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xfe300000-0xfe3fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] initcall acpi_pci_root_init+0x0/0x28 returned 0 after 53702 usecs calling acpi_pci_link_init+0x0/0x43 @ 1 ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. initcall acpi_pci_link_init+0x0/0x43 returned 0 after 2929 usecs calling pnp_init+0x0/0x12 @ 1 initcall pnp_init+0x0/0x12 returned 0 after 0 usecs calling __setup_shutdown_event+0x0/0x21 @ 1 initcall __setup_shutdown_event+0x0/0x21 returned 0 after 0 usecs calling xen_pcpu_init+0x0/0xa7 @ 1 sync cpu 0 get result ffffffff max_id 0 Failed to sync pcpu 0 initcall xen_pcpu_init+0x0/0xa7 returned 0 after 976 usecs calling xenbus_probe_backend_init+0x0/0x64 @ 1 initcall xenbus_probe_backend_init+0x0/0x64 returned 0 after 0 usecs calling balloon_init+0x0/0x1da @ 1 xen_balloon: Initialising balloon driver with page order 0. initcall balloon_init+0x0/0x1da returned 0 after 0 usecs calling xen_acpi_processor_extcntl_init+0x0/0x4f @ 1 initcall xen_acpi_processor_extcntl_init+0x0/0x4f returned 0 after 0 usecs calling misc_init+0x0/0xb7 @ 1 initcall misc_init+0x0/0xb7 returned 0 after 0 usecs calling vga_arb_device_init+0x0/0x80 @ 1 vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded initcall vga_arb_device_init+0x0/0x80 returned 0 after 0 usecs calling cn_init+0x0/0xa3 @ 1 initcall cn_init+0x0/0xa3 returned 0 after 976 usecs calling init_scsi+0x0/0x91 @ 1 SCSI subsystem initialized initcall init_scsi+0x0/0x91 returned 0 after 0 usecs calling ata_init+0x0/0x369 @ 1 libata version 3.00 loaded. initcall ata_init+0x0/0x369 returned 0 after 0 usecs calling phy_init+0x0/0x2e @ 1 initcall phy_init+0x0/0x2e returned 0 after 976 usecs calling init_pcmcia_cs+0x0/0x36 @ 1 initcall init_pcmcia_cs+0x0/0x36 returned 0 after 0 usecs calling usb_init+0x0/0x1a9 @ 1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x1a9 returned 0 after 0 usecs calling serio_init+0x0/0x86 @ 1 initcall serio_init+0x0/0x86 returned 0 after 976 usecs calling input_init+0x0/0x13c @ 1 initcall input_init+0x0/0x13c returned 0 after 0 usecs calling rtc_init+0x0/0x71 @ 1 initcall rtc_init+0x0/0x71 returned 0 after 0 usecs calling power_supply_class_init+0x0/0x38 @ 1 initcall power_supply_class_init+0x0/0x38 returned 0 after 0 usecs calling hwmon_init+0x0/0x106 @ 1 initcall hwmon_init+0x0/0x106 returned 0 after 0 usecs calling thermal_init+0x0/0x3f @ 1 initcall thermal_init+0x0/0x3f returned 0 after 0 usecs calling md_init+0x0/0xd0 @ 1 initcall md_init+0x0/0xd0 returned 0 after 0 usecs calling leds_init+0x0/0x40 @ 1 initcall leds_init+0x0/0x40 returned 0 after 0 usecs calling pci_subsys_init+0x0/0x118 @ 1 PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes initcall pci_subsys_init+0x0/0x118 returned 0 after 0 usecs calling proto_init+0x0/0x12 @ 1 initcall proto_init+0x0/0x12 returned 0 after 0 usecs calling net_dev_init+0x0/0x175 @ 1 initcall net_dev_init+0x0/0x175 returned 0 after 976 usecs calling neigh_init+0x0/0x71 @ 1 initcall neigh_init+0x0/0x71 returned 0 after 0 usecs calling fib_rules_init+0x0/0xa6 @ 1 initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs calling pktsched_init+0x0/0xd0 @ 1 initcall pktsched_init+0x0/0xd0 returned 0 after 0 usecs calling tc_filter_init+0x0/0x4c @ 1 initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs calling tc_action_init+0x0/0x4c @ 1 initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs calling genl_init+0x0/0x8f @ 1 initcall genl_init+0x0/0x8f returned 0 after 976 usecs calling cipso_v4_init+0x0/0x61 @ 1 initcall cipso_v4_init+0x0/0x61 returned 0 after 0 usecs calling wireless_nlevent_init+0x0/0x12 @ 1 initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs calling netlbl_init+0x0/0x81 @ 1 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default initcall netlbl_init+0x0/0x81 returned 0 after 0 usecs calling sysctl_init+0x0/0x48 @ 1 initcall sysctl_init+0x0/0x48 returned 0 after 0 usecs calling xen_mc_debugfs+0x0/0x118 @ 1 initcall xen_mc_debugfs+0x0/0x118 returned 0 after 976 usecs calling xen_mmu_debugfs+0x0/0x2be @ 1 initcall xen_mmu_debugfs+0x0/0x2be returned 0 after 0 usecs calling print_all_ICs+0x0/0x516 @ 1 initcall print_all_ICs+0x0/0x516 returned 0 after 0 usecs calling hpet_late_init+0x0/0xc5 @ 1 initcall hpet_late_init+0x0/0xc5 returned -19 after 0 usecs calling init_k8_nbs+0x0/0x28 @ 1 initcall init_k8_nbs+0x0/0x28 returned 0 after 0 usecs calling clocksource_done_booting+0x0/0x5a @ 1 Switching to clocksource xen initcall clocksource_done_booting+0x0/0x5a returned 0 after 1018 usecs calling ftrace_init_debugfs+0x0/0x217 @ 1 initcall ftrace_init_debugfs+0x0/0x217 returned 0 after 26 usecs calling rb_init_debugfs+0x0/0x2f @ 1 initcall rb_init_debugfs+0x0/0x2f returned 0 after 4 usecs calling tracer_init_debugfs+0x0/0x33f @ 1 initcall tracer_init_debugfs+0x0/0x33f returned 0 after 98 usecs calling init_trace_printk_function_export+0x0/0x2f @ 1 initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 2 usecs calling stat_workqueue_init+0x0/0x2b @ 1 initcall stat_workqueue_init+0x0/0x2b returned 0 after 2 usecs calling event_trace_init+0x0/0x1ec @ 1 initcall event_trace_init+0x0/0x1ec returned 0 after 13105 usecs calling init_pipe_fs+0x0/0x4c @ 1 initcall init_pipe_fs+0x0/0x4c returned 0 after 21 usecs calling eventpoll_init+0x0/0xba @ 1 initcall eventpoll_init+0x0/0xba returned 0 after 8 usecs calling anon_inode_init+0x0/0x125 @ 1 initcall anon_inode_init+0x0/0x125 returned 0 after 5 usecs calling blk_scsi_ioctl_init+0x0/0x289 @ 1 initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 0 usecs calling acpi_event_init+0x0/0x81 @ 1 initcall acpi_event_init+0x0/0x81 returned 0 after 26 usecs calling pnpacpi_init+0x0/0x8c @ 1 pnp: PnP ACPI init ACPI: bus type pnp registered xen: registering gsi 12 triggering 1 polarity 0 xen_allocate_pirq: returning irq 12 for gsi 12 xen: --> irq=12 Already setup the GSI :12 xen: registering gsi 1 triggering 1 polarity 0 xen_allocate_pirq: returning irq 1 for gsi 1 xen: --> irq=1 Already setup the GSI :1 xen: registering gsi 8 triggering 1 polarity 0 xen_allocate_pirq: returning irq 8 for gsi 8 xen: --> irq=8 Already setup the GSI :8 xen: registering gsi 13 triggering 1 polarity 0 xen_allocate_pirq: returning irq 13 for gsi 13 xen: --> irq=13 Already setup the GSI :13 pnp 00:0a: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling pnp 00:0a: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling pnp 00:0b: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling pnp 00:0b: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling pnp 00:0b: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling pnp 00:0b: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered initcall pnpacpi_init+0x0/0x8c returned 0 after 44639 usecs calling pnp_system_init+0x0/0x12 @ 1 system 00:01: iomem range 0xff800000-0xff8fffff has been reserved system 00:01: iomem range 0xffc00000-0xffcfffff has been reserved system 00:06: ioport range 0xc80-0xcff could not be reserved system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved system 00:0a: ioport range 0x900-0x97f has been reserved system 00:0a: ioport range 0x4d0-0x4d1 has been reserved system 00:0b: ioport range 0xf400-0xf4fe has been reserved system 00:0b: ioport range 0x1080-0x10bf has been reserved system 00:0b: ioport range 0x10c0-0x10df has been reserved system 00:0b: ioport range 0x809-0x809 has been reserved system 00:0c: iomem range 0x0-0x9efff could not be reserved system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved system 00:0c: iomem range 0xc0000-0xcffff could not be reserved system 00:0c: iomem range 0xe0000-0xfffff could not be reserved system 00:0c: iomem range 0x100000-0xdf66d7ff could not be reserved system 00:0c: iomem range 0xdf66d800-0xdf6fffff has been reserved system 00:0c: iomem range 0xdf700000-0xdf7fffff has been reserved system 00:0c: iomem range 0xdf700000-0xdfefffff could not be reserved system 00:0c: iomem range 0xffe00000-0xffffffff has been reserved system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved initcall pnp_system_init+0x0/0x12 returned 0 after 2721 usecs calling chr_dev_init+0x0/0xc3 @ 1 initcall chr_dev_init+0x0/0xc3 returned 0 after 200 usecs calling firmware_class_init+0x0/0x79 @ 1 initcall firmware_class_init+0x0/0x79 returned 0 after 5 usecs calling init_pcmcia_bus+0x0/0x74 @ 1 initcall init_pcmcia_bus+0x0/0x74 returned 0 after 15 usecs calling cpufreq_gov_performance_init+0x0/0x12 @ 1 initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 usecs calling cpufreq_gov_userspace_init+0x0/0x12 @ 1 initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 usecs calling init_acpi_pm_clocksource+0x0/0xf6 @ 1 initcall init_acpi_pm_clocksource+0x0/0xf6 returned 0 after 4449 usecs calling pcibios_assign_resources+0x0/0x74 @ 1 pci 0000:00:1c.0: PCI bridge, secondary bus 0000:09 pci 0000:00:1c.0: IO window: 0xd000-0xdfff pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff pci 0000:00:1c.0: PREFETCH window: 0x000000f0200000-0x000000f03fffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0b pci 0000:00:1c.1: IO window: 0x2000-0x2fff pci 0000:00:1c.1: MEM window: 0xfe700000-0xfe7fffff pci 0000:00:1c.1: PREFETCH window: 0x000000f0400000-0x000000f05fffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.4: IO window: 0xc000-0xcfff pci 0000:00:1c.4: MEM window: 0xfe400000-0xfe6fffff pci 0000:00:1c.4: PREFETCH window: 0x000000f0000000-0x000000f01fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0xfe300000-0xfe3fffff pci 0000:00:1e.0: PREFETCH window: disabled xen: registering gsi 16 triggering 0 polarity 1 alloc irq_desc for 16 on node 0 alloc kstat_irqs on node 0 xen: --> irq=16 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 xen: registering gsi 17 triggering 0 polarity 1 alloc irq_desc for 17 on node 0 alloc kstat_irqs on node 0 xen: --> irq=17 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:09: resource 0 io: [0xd000-0xdfff] pci_bus 0000:09: resource 1 mem: [0xfe800000-0xfe8fffff] pci_bus 0000:09: resource 2 pref mem [0xf0200000-0xf03fffff] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff] pci_bus 0000:0b: resource 1 mem: [0xfe700000-0xfe7fffff] pci_bus 0000:0b: resource 2 pref mem [0xf0400000-0xf05fffff] pci_bus 0000:0c: resource 0 io: [0xc000-0xcfff] pci_bus 0000:0c: resource 1 mem: [0xfe400000-0xfe6fffff] pci_bus 0000:0c: resource 2 pref mem [0xf0000000-0xf01fffff] pci_bus 0000:02: resource 1 mem: [0xfe300000-0xfe3fffff] pci_bus 0000:02: resource 3 io: [0x00-0xffff] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] initcall pcibios_assign_resources+0x0/0x74 returned 0 after 6430 usecs calling sysctl_core_init+0x0/0x38 @ 1 initcall sysctl_core_init+0x0/0x38 returned 0 after 7 usecs calling inet_init+0x0/0x20a @ 1 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered initcall inet_init+0x0/0x20a returned 0 after 7584 usecs calling af_unix_init+0x0/0x55 @ 1 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x55 returned 0 after 91 usecs calling pci_apply_final_quirks+0x0/0x35 @ 1 pci 0000:00:02.0: Boot video device initcall pci_apply_final_quirks+0x0/0x35 returned 0 after 330 usecs calling populate_rootfs+0x0/0xd7 @ 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 33571k freed initcall populate_rootfs+0x0/0xd7 returned 0 after 82163 usecs calling pci_iommu_init+0x0/0x3a @ 1 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) DMA: Placing 64MB software IO TLB between ffff8800077fa000 - ffff88000b7fa000 DMA: software IO TLB at phys 0x77fa000 - 0xb7fa000 initcall pci_iommu_init+0x0/0x3a returned 0 after 272 usecs calling calgary_fixup_tce_spaces+0x0/0xf9 @ 1 initcall calgary_fixup_tce_spaces+0x0/0xf9 returned -19 after 0 usecs calling i8259A_init_sysfs+0x0/0x22 @ 1 initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 149 usecs calling vsyscall_init+0x0/0x6c @ 1 initcall vsyscall_init+0x0/0x6c returned 0 after 18 usecs calling sbf_init+0x0/0xe9 @ 1 Simple Boot Flag at 0x79 set to 0x1 initcall sbf_init+0x0/0xe9 returned 0 after 97 usecs calling i8237A_init_sysfs+0x0/0x22 @ 1 initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 12 usecs calling add_rtc_cmos+0x0/0xa9 @ 1 initcall add_rtc_cmos+0x0/0xa9 returned 0 after 3 usecs calling cache_sysfs_init+0x0/0x69 @ 1 initcall cache_sysfs_init+0x0/0x69 returned 0 after 103 usecs calling mce_init_device+0x0/0x107 @ 1 initcall mce_init_device+0x0/0x107 returned 0 after 108 usecs calling threshold_init_device+0x0/0x8c @ 1 initcall threshold_init_device+0x0/0x8c returned 0 after 0 usecs calling thermal_throttle_init_device+0x0/0x93 @ 1 initcall thermal_throttle_init_device+0x0/0x93 returned 0 after 0 usecs calling msr_init+0x0/0x14a @ 1 initcall msr_init+0x0/0x14a returned 0 after 88 usecs calling cpuid_init+0x0/0x14a @ 1 initcall cpuid_init+0x0/0x14a returned 0 after 53 usecs calling ioapic_init_sysfs+0x0/0xb3 @ 1 initcall ioapic_init_sysfs+0x0/0xb3 returned 0 after 12 usecs calling add_pcspkr+0x0/0x28 @ 1 initcall add_pcspkr+0x0/0x28 returned 0 after 22 usecs calling audit_classes_init+0x0/0xaf @ 1 initcall audit_classes_init+0x0/0xaf returned 0 after 4 usecs calling init_vdso_vars+0x0/0x207 @ 1 initcall init_vdso_vars+0x0/0x207 returned 0 after 19 usecs calling ia32_binfmt_init+0x0/0x14 @ 1 initcall ia32_binfmt_init+0x0/0x14 returned 0 after 1 usecs calling sysenter_setup+0x0/0x2cb @ 1 initcall sysenter_setup+0x0/0x2cb returned 0 after 4 usecs calling init_sched_debug_procfs+0x0/0x2c @ 1 initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 15 usecs calling proc_schedstat_init+0x0/0x22 @ 1 initcall proc_schedstat_init+0x0/0x22 returned 0 after 1 usecs calling proc_execdomains_init+0x0/0x22 @ 1 initcall proc_execdomains_init+0x0/0x22 returned 0 after 1 usecs calling ioresources_init+0x0/0x3c @ 1 initcall ioresources_init+0x0/0x3c returned 0 after 2 usecs calling uid_cache_init+0x0/0x8e @ 1 initcall uid_cache_init+0x0/0x8e returned 0 after 9 usecs calling init_posix_timers+0x0/0x17a @ 1 initcall init_posix_timers+0x0/0x17a returned 0 after 3 usecs calling init_posix_cpu_timers+0x0/0xe5 @ 1 initcall init_posix_cpu_timers+0x0/0xe5 returned 0 after 0 usecs calling nsproxy_cache_init+0x0/0x2d @ 1 initcall nsproxy_cache_init+0x0/0x2d returned 0 after 1 usecs calling create_proc_profile+0x0/0x264 @ 1 initcall create_proc_profile+0x0/0x264 returned 0 after 0 usecs calling timekeeping_init_device+0x0/0x22 @ 1 initcall timekeeping_init_device+0x0/0x22 returned 0 after 10 usecs calling init_clocksource_sysfs+0x0/0x50 @ 1 initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 10 usecs calling init_timer_list_procfs+0x0/0x2c @ 1 initcall init_timer_list_procfs+0x0/0x2c returned 0 after 1 usecs calling init_tstats_procfs+0x0/0x2c @ 1 initcall init_tstats_procfs+0x0/0x2c returned 0 after 1 usecs calling futex_init+0x0/0x68 @ 1 initcall futex_init+0x0/0x68 returned 0 after 19 usecs calling proc_dma_init+0x0/0x22 @ 1 initcall proc_dma_init+0x0/0x22 returned 0 after 2 usecs calling proc_modules_init+0x0/0x22 @ 1 initcall proc_modules_init+0x0/0x22 returned 0 after 1 usecs calling kallsyms_init+0x0/0x25 @ 1 initcall kallsyms_init+0x0/0x25 returned 0 after 1 usecs calling snapshot_device_init+0x0/0x12 @ 1 initcall snapshot_device_init+0x0/0x12 returned 0 after 18 usecs calling crash_save_vmcoreinfo_init+0x0/0x46d @ 1 initcall crash_save_vmcoreinfo_init+0x0/0x46d returned 0 after 20 usecs calling crash_notes_memory_init+0x0/0x37 @ 1 initcall crash_notes_memory_init+0x0/0x37 returned 0 after 5 usecs calling pid_namespaces_init+0x0/0x2d @ 1 initcall pid_namespaces_init+0x0/0x2d returned 0 after 0 usecs calling utrace_init+0x0/0x52 @ 1 initcall utrace_init+0x0/0x52 returned 0 after 15 usecs calling audit_init+0x0/0x133 @ 1 audit: initializing netlink socket (disabled) type=2000 audit(1281992989.777:1): initialized initcall audit_init+0x0/0x133 returned 0 after 212 usecs calling audit_tree_init+0x0/0x49 @ 1 initcall audit_tree_init+0x0/0x49 returned 0 after 1 usecs calling init_kprobes+0x0/0x17b @ 1 initcall init_kprobes+0x0/0x17b returned 0 after 7011 usecs calling hung_task_init+0x0/0x53 @ 1 initcall hung_task_init+0x0/0x53 returned 0 after 66 usecs calling utsname_sysctl_init+0x0/0x14 @ 1 initcall utsname_sysctl_init+0x0/0x14 returned 0 after 5 usecs calling init_tracepoints+0x0/0x17 @ 1 initcall init_tracepoints+0x0/0x17 returned 0 after 0 usecs calling init_lstats_procfs+0x0/0x25 @ 1 initcall init_lstats_procfs+0x0/0x25 returned 0 after 3 usecs calling ftrace_mod_cmd_init+0x0/0x12 @ 1 initcall ftrace_mod_cmd_init+0x0/0x12 returned 0 after 0 usecs calling init_events+0x0/0x64 @ 1 initcall init_events+0x0/0x64 returned 0 after 6 usecs calling init_sched_switch_trace+0x0/0x12 @ 1 initcall init_sched_switch_trace+0x0/0x12 returned 0 after 1 usecs calling init_stack_trace+0x0/0x12 @ 1 initcall init_stack_trace+0x0/0x12 returned 0 after 0 usecs calling init_function_trace+0x0/0x3e @ 1 initcall init_function_trace+0x0/0x3e returned 0 after 0 usecs calling init_wakeup_tracer+0x0/0x22 @ 1 initcall init_wakeup_tracer+0x0/0x22 returned 0 after 0 usecs calling stack_trace_init+0x0/0x6b @ 1 initcall stack_trace_init+0x0/0x6b returned 0 after 22 usecs calling init_graph_trace+0x0/0x32 @ 1 initcall init_graph_trace+0x0/0x32 returned 0 after 0 usecs calling init_kmem_tracer+0x0/0x54 @ 1 initcall init_kmem_tracer+0x0/0x54 returned 0 after 1 usecs calling init_blk_tracer+0x0/0x55 @ 1 initcall init_blk_tracer+0x0/0x55 returned 0 after 1 usecs calling perf_event_sysfs_init+0x0/0x19 @ 1 initcall perf_event_sysfs_init+0x0/0x19 returned 0 after 3 usecs calling init_per_zone_wmark_min+0x0/0x67 @ 1 initcall init_per_zone_wmark_min+0x0/0x67 returned 0 after 281 usecs calling kswapd_init+0x0/0x7c @ 1 initcall kswapd_init+0x0/0x7c returned 0 after 40 usecs calling setup_vmstat+0x0/0xc5 @ 1 initcall setup_vmstat+0x0/0xc5 returned 0 after 11 usecs calling mm_sysfs_init+0x0/0x29 @ 1 initcall mm_sysfs_init+0x0/0x29 returned 0 after 4 usecs calling proc_vmalloc_init+0x0/0x25 @ 1 initcall proc_vmalloc_init+0x0/0x25 returned 0 after 1 usecs calling procswaps_init+0x0/0x22 @ 1 initcall procswaps_init+0x0/0x22 returned 0 after 1 usecs calling hugetlb_init+0x0/0x3d0 @ 1 HugeTLB registered 2 MB page size, pre-allocated 0 pages initcall hugetlb_init+0x0/0x3d0 returned 0 after 99 usecs calling ksm_init+0x0/0x1a7 @ 1 initcall ksm_init+0x0/0x1a7 returned 0 after 49 usecs calling slab_proc_init+0x0/0x25 @ 1 initcall slab_proc_init+0x0/0x25 returned 0 after 2 usecs calling slab_sysfs_init+0x0/0xee @ 1 initcall slab_sysfs_init+0x0/0xee returned 0 after 1505 usecs calling fasync_init+0x0/0x2a @ 1 initcall fasync_init+0x0/0x2a returned 0 after 3 usecs calling proc_filesystems_init+0x0/0x22 @ 1 initcall proc_filesystems_init+0x0/0x22 returned 0 after 2 usecs calling dnotify_init+0x0/0x80 @ 1 initcall dnotify_init+0x0/0x80 returned 0 after 7 usecs calling inotify_setup+0x0/0x12 @ 1 initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs calling inotify_user_setup+0x0/0xbe @ 1 initcall inotify_user_setup+0x0/0xbe returned 0 after 21 usecs calling aio_setup+0x0/0xa1 @ 1 initcall aio_setup+0x0/0xa1 returned 0 after 73 usecs calling proc_locks_init+0x0/0x22 @ 1 initcall proc_locks_init+0x0/0x22 returned 0 after 2 usecs calling init_sys32_ioctl+0x0/0x82 @ 1 initcall init_sys32_ioctl+0x0/0x82 returned 0 after 11 usecs calling init_mbcache+0x0/0x14 @ 1 initcall init_mbcache+0x0/0x14 returned 0 after 0 usecs calling dquot_init+0x0/0xf9 @ 1 VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) initcall dquot_init+0x0/0xf9 returned 0 after 228 usecs calling init_v2_quota_format+0x0/0x12 @ 1 initcall init_v2_quota_format+0x0/0x12 returned 0 after 0 usecs calling proc_cmdline_init+0x0/0x22 @ 1 initcall proc_cmdline_init+0x0/0x22 returned 0 after 1 usecs calling proc_cpuinfo_init+0x0/0x22 @ 1 initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 1 usecs calling proc_devices_init+0x0/0x22 @ 1 initcall proc_devices_init+0x0/0x22 returned 0 after 1 usecs calling proc_interrupts_init+0x0/0x22 @ 1 initcall proc_interrupts_init+0x0/0x22 returned 0 after 1 usecs calling proc_loadavg_init+0x0/0x22 @ 1 initcall proc_loadavg_init+0x0/0x22 returned 0 after 1 usecs calling proc_meminfo_init+0x0/0x22 @ 1 initcall proc_meminfo_init+0x0/0x22 returned 0 after 1 usecs calling proc_stat_init+0x0/0x22 @ 1 initcall proc_stat_init+0x0/0x22 returned 0 after 11 usecs calling proc_uptime_init+0x0/0x22 @ 1 initcall proc_uptime_init+0x0/0x22 returned 0 after 3 usecs calling proc_version_init+0x0/0x22 @ 1 initcall proc_version_init+0x0/0x22 returned 0 after 1 usecs calling proc_softirqs_init+0x0/0x22 @ 1 initcall proc_softirqs_init+0x0/0x22 returned 0 after 1 usecs calling proc_kcore_init+0x0/0xb5 @ 1 initcall proc_kcore_init+0x0/0xb5 returned 0 after 5 usecs calling vmcore_init+0x0/0x36b @ 1 initcall vmcore_init+0x0/0x36b returned 0 after 0 usecs calling proc_kmsg_init+0x0/0x25 @ 1 initcall proc_kmsg_init+0x0/0x25 returned 0 after 1 usecs calling proc_page_init+0x0/0x42 @ 1 initcall proc_page_init+0x0/0x42 returned 0 after 1 usecs calling init_devpts_fs+0x0/0x4c @ 1 initcall init_devpts_fs+0x0/0x4c returned 0 after 8 usecs calling init_ext3_fs+0x0/0x71 @ 1 initcall init_ext3_fs+0x0/0x71 returned 0 after 69 usecs calling init_ext4_fs+0x0/0xea @ 1 initcall init_ext4_fs+0x0/0xea returned 0 after 168 usecs calling journal_init+0x0/0x99 @ 1 initcall journal_init+0x0/0x99 returned 0 after 129 usecs calling journal_init+0x0/0xae @ 1 initcall journal_init+0x0/0xae returned 0 after 14 usecs calling init_ramfs_fs+0x0/0x12 @ 1 initcall init_ramfs_fs+0x0/0x12 returned 0 after 1 usecs calling init_hugetlbfs_fs+0x0/0x98 @ 1 initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 44 usecs calling init_iso9660_fs+0x0/0x71 @ 1 initcall init_iso9660_fs+0x0/0x71 returned 0 after 51 usecs calling init_nls_cp437+0x0/0x12 @ 1 initcall init_nls_cp437+0x0/0x12 returned 0 after 0 usecs calling init_nls_ascii+0x0/0x12 @ 1 initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs calling ipc_init+0x0/0x2f @ 1 msgmni has been set to 6870 initcall ipc_init+0x0/0x2f returned 0 after 118 usecs calling ipc_sysctl_init+0x0/0x14 @ 1 initcall ipc_sysctl_init+0x0/0x14 returned 0 after 2 usecs calling init_mqueue_fs+0x0/0xb5 @ 1 initcall init_mqueue_fs+0x0/0xb5 returned 0 after 66 usecs calling key_proc_init+0x0/0x59 @ 1 initcall key_proc_init+0x0/0x59 returned 0 after 2 usecs calling selinux_nf_ip_init+0x0/0x62 @ 1 SELinux: Registering netfilter hooks initcall selinux_nf_ip_init+0x0/0x62 returned 0 after 88 usecs calling init_sel_fs+0x0/0x68 @ 1 initcall init_sel_fs+0x0/0x68 returned 0 after 103 usecs calling selnl_init+0x0/0x4d @ 1 initcall selnl_init+0x0/0x4d returned 0 after 5 usecs calling sel_netif_init+0x0/0x66 @ 1 initcall sel_netif_init+0x0/0x66 returned 0 after 4 usecs calling sel_netnode_init+0x0/0x74 @ 1 initcall sel_netnode_init+0x0/0x74 returned 0 after 2 usecs calling sel_netport_init+0x0/0x74 @ 1 initcall sel_netport_init+0x0/0x74 returned 0 after 2 usecs calling aurule_init+0x0/0x37 @ 1 initcall aurule_init+0x0/0x37 returned 0 after 0 usecs calling crypto_wq_init+0x0/0x2e @ 1 initcall crypto_wq_init+0x0/0x2e returned 0 after 68 usecs calling crypto_algapi_init+0x0/0xd @ 1 initcall crypto_algapi_init+0x0/0xd returned 0 after 4 usecs calling skcipher_module_init+0x0/0x35 @ 1 initcall skcipher_module_init+0x0/0x35 returned 0 after 0 usecs calling chainiv_module_init+0x0/0x12 @ 1 initcall chainiv_module_init+0x0/0x12 returned 0 after 1 usecs calling eseqiv_module_init+0x0/0x12 @ 1 initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs calling hmac_module_init+0x0/0x12 @ 1 initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs calling md5_mod_init+0x0/0x12 @ 1 initcall md5_mod_init+0x0/0x12 returned 0 after 84 usecs calling sha1_generic_mod_init+0x0/0x12 @ 1 initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 69 usecs calling crc32c_mod_init+0x0/0x12 @ 1 initcall crc32c_mod_init+0x0/0x12 returned 0 after 80 usecs calling krng_mod_init+0x0/0x12 @ 1 alg: No test for stdrng (krng) initcall krng_mod_init+0x0/0x12 returned 0 after 132 usecs calling proc_genhd_init+0x0/0x3c @ 1 initcall proc_genhd_init+0x0/0x3c returned 0 after 3 usecs calling bsg_init+0x0/0x12e @ 1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) initcall bsg_init+0x0/0x12e returned 0 after 149 usecs calling noop_init+0x0/0x14 @ 1 io scheduler noop registered initcall noop_init+0x0/0x14 returned 0 after 88 usecs calling as_init+0x0/0x14 @ 1 io scheduler anticipatory registered initcall as_init+0x0/0x14 returned 0 after 89 usecs calling deadline_init+0x0/0x14 @ 1 io scheduler deadline registered initcall deadline_init+0x0/0x14 returned 0 after 88 usecs calling cfq_init+0x0/0x94 @ 1 io scheduler cfq registered (default) initcall cfq_init+0x0/0x94 returned 0 after 130 usecs calling percpu_counter_startup+0x0/0x38 @ 1 initcall percpu_counter_startup+0x0/0x38 returned 0 after 0 usecs calling dynamic_debug_init+0x0/0x12a @ 1 initcall dynamic_debug_init+0x0/0x12a returned 0 after 79 usecs calling pci_proc_init+0x0/0x6a @ 1 initcall pci_proc_init+0x0/0x6a returned 0 after 78 usecs calling pcie_portdrv_init+0x0/0x4c @ 1 alloc irq_desc for 756 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 755 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 754 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:1c.4: setting latency timer to 64 initcall pcie_portdrv_init+0x0/0x4c returned 0 after 1702 usecs calling aer_service_init+0x0/0x2b @ 1 initcall aer_service_init+0x0/0x2b returned 0 after 9 usecs calling pci_hotplug_init+0x0/0x1d @ 1 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 initcall pci_hotplug_init+0x0/0x1d returned 0 after 1836 usecs calling pcied_init+0x0/0x79 @ 1 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 initcall pcied_init+0x0/0x79 returned 0 after 219 usecs calling acpiphp_init+0x0/0x5f @ 1 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [1] registered initcall acpiphp_init+0x0/0x5f returned 0 after 440 usecs calling pci_stub_init+0x0/0x139 @ 1 pci-stub: invalid id string "" initcall pci_stub_init+0x0/0x139 returned 0 after 108 usecs calling fb_console_init+0x0/0x11d @ 1 initcall fb_console_init+0x0/0x11d returned 0 after 20 usecs calling vesafb_init+0x0/0x23c @ 1 initcall vesafb_init+0x0/0x23c returned 0 after 29 usecs calling efifb_init+0x0/0x1f5 @ 1 initcall efifb_init+0x0/0x1f5 returned -19 after 3 usecs calling acpi_reserve_resources+0x0/0xeb @ 1 initcall acpi_reserve_resources+0x0/0xeb returned 0 after 3 usecs calling irqrouter_init_sysfs+0x0/0x38 @ 1 initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 10 usecs calling acpi_ac_init+0x0/0x45 @ 1 ACPI: AC Adapter [AC] (on-line) initcall acpi_ac_init+0x0/0x45 returned 0 after 222 usecs calling acpi_button_init+0x0/0x56 @ 1 input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PBTN] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SBTN] initcall acpi_button_init+0x0/0x56 returned 0 after 1565 usecs calling acpi_fan_init+0x0/0x56 @ 1 initcall acpi_fan_init+0x0/0x56 returned 0 after 18 usecs calling acpi_pci_slot_init+0x0/0x20 @ 1 initcall acpi_pci_slot_init+0x0/0x20 returned 0 after 159 usecs calling acpi_processor_init+0x0/0x136 @ 1 ACPI: SSDT 00000000df66e4b4 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT 00000000df66de4a 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Marking TSC unstable due to TSC halts in idle ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: SSDT 00000000df66e77c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) ACPI: SSDT 00000000df66e42f 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) initcall acpi_processor_init+0x0/0x136 returned 0 after 6420 usecs calling acpi_container_init+0x0/0x42 @ 1 initcall acpi_container_init+0x0/0x42 returned 0 after 2755 usecs calling acpi_thermal_init+0x0/0x7b @ 1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (46 C) initcall acpi_thermal_init+0x0/0x7b returned 0 after 596 usecs calling acpi_battery_init+0x0/0x16 @ 1 initcall acpi_battery_init+0x0/0x16 returned 0 after 4 usecs calling 1_acpi_battery_init_async+0x0/0x3c @ 53 calling xenbus_probe_initcall+0x0/0x37 @ 1 initcall xenbus_probe_initcall+0x0/0x37 returned 0 after 0 usecs calling hypervisor_subsys_init+0x0/0x25 @ 1 initcall hypervisor_subsys_init+0x0/0x25 returned 0 after 0 usecs calling hyper_sysfs_init+0x0/0xfb @ 1 initcall hyper_sysfs_init+0x0/0xfb returned 0 after 22 usecs calling mcelog_init+0x0/0x25 @ 1 alloc irq_desc for 753 on node 0 alloc kstat_irqs on node 0 initcall mcelog_init+0x0/0x25 returned 0 after 355 usecs calling rand_initialize+0x0/0x31 @ 1 initcall rand_initialize+0x0/0x31 returned 0 after 11 usecs calling tty_init+0x0/0xf5 @ 1 initcall tty_init+0x0/0xf5 returned 0 after 3041 usecs calling pty_init+0x0/0x336 @ 1 initcall pty_init+0x0/0x336 returned 0 after 36 usecs calling sysrq_init+0x0/0x25 @ 1 initcall sysrq_init+0x0/0x25 returned 0 after 3 usecs calling xen_hvc_init+0x0/0xde @ 1 alloc irq_desc for 752 on node 0 alloc kstat_irqs on node 0 initcall xen_hvc_init+0x0/0xde returned 0 after 861 usecs calling raw_init+0x0/0xe5 @ 1 initcall raw_init+0x0/0xe5 returned 0 after 192 usecs calling hpet_init+0x0/0x6a @ 1 hpet_acpi_add: no address or irqs in _CRS initcall hpet_init+0x0/0x6a returned 0 after 15737 usecs calling nvram_init+0x0/0x82 @ 1 Non-volatile memory driver v1.3 initcall nvram_init+0x0/0x82 returned 0 after 264 usecs calling agp_init+0x0/0x26 @ 1 Linux agpgart interface v0.103 initcall agp_init+0x0/0x26 returned 0 after 238 usecs calling agp_intel_init+0x0/0x29 @ 1 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory ACPI: Battery Slot [BAT0] (battery present) initcall 1_acpi_battery_init_async+0x0/0x3c returned 0 after 34205 usecs agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 initcall agp_intel_init+0x0/0x29 returned 0 after 8582 usecs calling agp_sis_init+0x0/0x29 @ 1 initcall agp_sis_init+0x0/0x29 returned 0 after 45 usecs calling agp_via_init+0x0/0x29 @ 1 initcall agp_via_init+0x0/0x29 returned 0 after 14 usecs calling init_tis+0x0/0x8e @ 1 initcall init_tis+0x0/0x8e returned 0 after 18 usecs calling cn_proc_init+0x0/0x3d @ 1 initcall cn_proc_init+0x0/0x3d returned 0 after 1 usecs calling serial8250_init+0x0/0x143 @ 1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled initcall serial8250_init+0x0/0x143 returned 0 after 306 usecs calling serial8250_pnp_init+0x0/0x12 @ 1 initcall serial8250_pnp_init+0x0/0x12 returned 0 after 117 usecs calling serial8250_pci_init+0x0/0x1b @ 1 initcall serial8250_pci_init+0x0/0x1b returned 0 after 23 usecs calling init_kgdboc+0x0/0x16 @ 1 initcall init_kgdboc+0x0/0x16 returned 0 after 0 usecs calling topology_sysfs_init+0x0/0x55 @ 1 initcall topology_sysfs_init+0x0/0x55 returned 0 after 10 usecs calling brd_init+0x0/0x176 @ 1 brd: module loaded initcall brd_init+0x0/0x176 returned 0 after 1231 usecs calling loop_init+0x0/0x1a3 @ 1 loop: module loaded initcall loop_init+0x0/0x1a3 returned 0 after 649 usecs calling init_kgdbts+0x0/0x16 @ 1 initcall init_kgdbts+0x0/0x16 returned 0 after 0 usecs calling mac_hid_init+0x0/0x8e @ 1 input: Macintosh mouse button emulation as /devices/virtual/input/input3 initcall mac_hid_init+0x0/0x8e returned 0 after 141 usecs calling scsi_dh_init+0x0/0x3f @ 1 initcall scsi_dh_init+0x0/0x3f returned 0 after 0 usecs calling init_sd+0x0/0x161 @ 1 initcall init_sd+0x0/0x161 returned 0 after 52 usecs calling init_sr+0x0/0x46 @ 1 initcall init_sr+0x0/0x46 returned 0 after 8 usecs calling init_sg+0x0/0x125 @ 1 initcall init_sg+0x0/0x125 returned 0 after 22 usecs calling ahci_init+0x0/0x1b @ 1 ahci 0000:00:1f.2: version 3.0 xen: registering gsi 17 triggering 0 polarity 1 xen_allocate_pirq: returning irq 17 for gsi 17 xen: --> irq=17 Already setup the GSI :17 ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 alloc irq_desc for 751 on node 0 alloc kstat_irqs on node 0 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 751 ata2: DUMMY ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 751 initcall ahci_init+0x0/0x1b returned 0 after 4458 usecs calling 2_async_port_probe+0x0/0xb8 @ 53 calling 3_async_port_probe+0x0/0xb8 @ 58 async_waiting @ 58 calling 4_async_port_probe+0x0/0xb8 @ 59 calling piix_init+0x0/0x29 @ 1 ata_piix 0000:00:1f.1: version 2.13 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 initcall piix_init+0x0/0x29 returned 0 after 2086 usecs calling 5_async_port_probe+0x0/0xb8 @ 62 calling 6_async_port_probe+0x0/0xb8 @ 63 ata5: port disabled. ignoring. async_waiting @ 63 calling fixed_mdio_bus_init+0x0/0xf4 @ 1 Fixed MDIO Bus: probed initcall fixed_mdio_bus_init+0x0/0xf4 returned 0 after 116 usecs calling net_olddevs_init+0x0/0x9e @ 1 initcall net_olddevs_init+0x0/0x9e returned 0 after 3 usecs calling cdrom_init+0x0/0x6a @ 1 initcall cdrom_init+0x0/0x6a returned 0 after 3 usecs calling mon_init+0x0/0x104 @ 1 initcall mon_init+0x0/0x104 returned 0 after 44 usecs calling ehci_hcd_init+0x0/0xbf @ 1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver xen: registering gsi 22 triggering 0 polarity 1 alloc irq_desc for 22 on node 0 alloc kstat_irqs on node 0 xen: --> irq=22 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32.17-157.xendom0.fc12.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected xen: registering gsi 20 triggering 0 polarity 1 alloc irq_desc for 20 on node 0 alloc kstat_irqs on node 0 xen: --> irq=20 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32.17-157.xendom0.fc12.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected initcall ehci_hcd_init+0x0/0xbf returned 0 after 30973 usecs calling ohci_hcd_mod_init+0x0/0x90 @ 1 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver initcall ohci_hcd_mod_init+0x0/0x90 returned 0 after 98 usecs calling uhci_hcd_init+0x0/0xc0 @ 1 uhci_hcd: USB Universal Host Controller Interface driver xen: registering gsi 20 triggering 0 polarity 1 xen_allocate_pirq: returning irq 20 for gsi 20 xen: --> irq=20 Already setup the GSI :20 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32.17-157.xendom0.fc12.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xen: registering gsi 21 triggering 0 polarity 1 alloc irq_desc for 21 on node 0 alloc kstat_irqs on node 0 xen: --> irq=21 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32.17-157.xendom0.fc12.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected xen: registering gsi 20 triggering 0 polarity 1 xen_allocate_pirq: returning irq 20 for gsi 20 xen: --> irq=20 Already setup the GSI :20 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32.17-157.xendom0.fc12.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected xen: registering gsi 21 triggering 0 polarity 1 xen_allocate_pirq: returning irq 21 for gsi 21 xen: --> irq=21 Already setup the GSI :21 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.32.17-157.xendom0.fc12.x86_64 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected xen: registering gsi 22 triggering 0 polarity 1 xen_allocate_pirq: returning irq 22 for gsi 22 xen: --> irq=22 Already setup the GSI :22 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.32.17-157.xendom0.fc12.x86_64 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected initcall uhci_hcd_init+0x0/0xc0 returned 0 after 9604 usecs calling i8042_init+0x0/0x3af @ 1 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 initcall i8042_init+0x0/0x3af returned 0 after 26230 usecs calling serport_init+0x0/0x34 @ 1 initcall serport_init+0x0/0x34 returned 0 after 0 usecs calling mousedev_init+0x0/0x62 @ 1 mice: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0x62 returned 0 after 132 usecs calling evdev_init+0x0/0x12 @ 1 initcall evdev_init+0x0/0x12 returned 0 after 110 usecs calling atkbd_init+0x0/0x27 @ 1 initcall atkbd_init+0x0/0x27 returned 0 after 15 usecs calling psmouse_init+0x0/0x6f @ 1 initcall psmouse_init+0x0/0x6f returned 0 after 89 usecs calling cmos_init+0x0/0x6a @ 1 rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram initcall cmos_init+0x0/0x6a returned 0 after 410 usecs calling dm_init+0x0/0x46 @ 1 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx initcall dm_init+0x0/0x46 returned 0 after 436 usecs calling dm_snapshot_init+0x0/0x239 @ 1 initcall dm_snapshot_init+0x0/0x239 returned 0 after 80 usecs calling dm_mirror_init+0x0/0x79 @ 1 initcall dm_mirror_init+0x0/0x79 returned 0 after 36 usecs calling dm_dirty_log_init+0x0/0x59 @ 1 initcall dm_dirty_log_init+0x0/0x59 returned 0 after 0 usecs calling dm_zero_init+0x0/0x31 @ 1 initcall dm_zero_init+0x0/0x31 returned 0 after 0 usecs calling init_ladder+0x0/0x12 @ 1 cpuidle: using governor ladder initcall init_ladder+0x0/0x12 returned 0 after 90 usecs calling init_menu+0x0/0x12 @ 1 cpuidle: using governor menu initcall init_menu+0x0/0x12 returned 0 after 87 usecs calling efivars_init+0x0/0x236 @ 1 initcall efivars_init+0x0/0x236 returned -19 after 0 usecs calling hid_init+0x0/0x66 @ 1 initcall hid_init+0x0/0x66 returned 0 after 57 usecs calling a4_init+0x0/0x1b @ 1 initcall a4_init+0x0/0x1b returned 0 after 8 usecs calling apple_init+0x0/0x39 @ 1 initcall apple_init+0x0/0x39 returned 0 after 9 usecs calling belkin_init+0x0/0x1b @ 1 initcall belkin_init+0x0/0x1b returned 0 after 6 usecs calling ch_init+0x0/0x1b @ 1 initcall ch_init+0x0/0x1b returned 0 after 6 usecs calling ch_init+0x0/0x1b @ 1 initcall ch_init+0x0/0x1b returned 0 after 6 usecs calling cp_init+0x0/0x1b @ 1 initcall cp_init+0x0/0x1b returned 0 after 6 usecs calling dr_init+0x0/0x1b @ 1 initcall dr_init+0x0/0x1b returned 0 after 20 usecs calling ez_init+0x0/0x1b @ 1 initcall ez_init+0x0/0x1b returned 0 after 8 usecs calling gyration_init+0x0/0x1b @ 1 initcall gyration_init+0x0/0x1b returned 0 after 8 usecs calling ks_init+0x0/0x1b @ 1 initcall ks_init+0x0/0x1b returned 0 after 8 usecs calling kye_init+0x0/0x1b @ 1 initcall kye_init+0x0/0x1b returned 0 after 6 usecs calling lg_init+0x0/0x1b @ 1 initcall lg_init+0x0/0x1b returned 0 after 6 usecs calling ms_init+0x0/0x1b @ 1 initcall ms_init+0x0/0x1b returned 0 after 6 usecs calling mr_init+0x0/0x1b @ 1 initcall mr_init+0x0/0x1b returned 0 after 34 usecs calling ntrig_init+0x0/0x1b @ 1 initcall ntrig_init+0x0/0x1b returned 0 after 8 usecs calling pl_init+0x0/0x1b @ 1 initcall pl_init+0x0/0x1b returned 0 after 6 usecs calling pl_init+0x0/0x1b @ 1 initcall pl_init+0x0/0x1b returned 0 after 16 usecs calling samsung_init+0x0/0x1b @ 1 initcall samsung_init+0x0/0x1b returned 0 after 8 usecs calling sjoy_init+0x0/0x1b @ 1 initcall sjoy_init+0x0/0x1b returned 0 after 8 usecs calling sony_init+0x0/0x1b @ 1 initcall sony_init+0x0/0x1b returned 0 after 8 usecs calling sp_init+0x0/0x1b @ 1 initcall sp_init+0x0/0x1b returned 0 after 6 usecs calling ga_init+0x0/0x1b @ 1 initcall ga_init+0x0/0x1b returned 0 after 6 usecs calling tm_init+0x0/0x1b @ 1 initcall tm_init+0x0/0x1b returned 0 after 6 usecs calling ts_init+0x0/0x1b @ 1 initcall ts_init+0x0/0x1b returned 0 after 6 usecs calling twinhan_init+0x0/0x1b @ 1 initcall twinhan_init+0x0/0x1b returned 0 after 6 usecs calling zp_init+0x0/0x1b @ 1 initcall zp_init+0x0/0x1b returned 0 after 6 usecs calling hid_init+0x0/0xc7 @ 1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver initcall hid_init+0x0/0xc7 returned 0 after 376 usecs calling staging_init+0x0/0x8 @ 1 initcall staging_init+0x0/0x8 returned 0 after 0 usecs calling flow_cache_init+0x0/0x1a7 @ 1 initcall flow_cache_init+0x0/0x1a7 returned 0 after 14 usecs calling blackhole_module_init+0x0/0x12 @ 1 initcall blackhole_module_init+0x0/0x12 returned 0 after 1 usecs calling init_cgroup_cls+0x0/0x12 @ 1 initcall init_cgroup_cls+0x0/0x12 returned 0 after 0 usecs calling nf_conntrack_standalone_init+0x0/0x12 @ 1 nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after 523 usecs calling xt_init+0x0/0x13b @ 1 initcall xt_init+0x0/0x13b returned 0 after 1 usecs calling tcpudp_mt_init+0x0/0x17 @ 1 initcall tcpudp_mt_init+0x0/0x17 returned 0 after 1 usecs calling conntrack_mt_init+0x0/0x17 @ 1 initcall conntrack_mt_init+0x0/0x17 returned 0 after 0 usecs calling state_mt_init+0x0/0x17 @ 1 initcall state_mt_init+0x0/0x17 returned 0 after 0 usecs calling sysctl_ipv4_init+0x0/0x4e @ 1 initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 5 usecs calling init_syncookies+0x0/0x19 @ 1 initcall init_syncookies+0x0/0x19 returned 0 after 21 usecs calling ipv4_netfilter_init+0x0/0x17 @ 1 initcall ipv4_netfilter_init+0x0/0x17 returned 0 after 0 usecs calling nf_conntrack_l3proto_ipv4_init+0x0/0x12d @ 1 initcall nf_conntrack_l3proto_ipv4_init+0x0/0x12d returned 0 after 38 usecs calling nf_defrag_init+0x0/0x17 @ 1 initcall nf_defrag_init+0x0/0x17 returned 0 after 0 usecs calling ip_tables_init+0x0/0xb8 @ 1 ip_tables: (C) 2000-2006 Netfilter Core Team initcall ip_tables_init+0x0/0xb8 returned 0 after 100 usecs calling iptable_filter_init+0x0/0x69 @ 1 initcall iptable_filter_init+0x0/0x69 returned 0 after 6 usecs calling reject_tg_init+0x0/0x12 @ 1 initcall reject_tg_init+0x0/0x12 returned 0 after 0 usecs calling cubictcp_register+0x0/0x5c @ 1 TCP cubic registered initcall cubictcp_register+0x0/0x5c returned 0 after 84 usecs calling xfrm_user_init+0x0/0x4a @ 1 Initializing XFRM netlink socket initcall xfrm_user_init+0x0/0x4a returned 0 after 100 usecs calling packet_init+0x0/0x47 @ 1 NET: Registered protocol family 17 initcall packet_init+0x0/0x47 returned 0 after 94 usecs calling dsa_init_module+0x0/0x14 @ 1 initcall dsa_init_module+0x0/0x14 returned 0 after 0 usecs calling edsa_init_module+0x0/0x14 @ 1 initcall edsa_init_module+0x0/0x14 returned 0 after 0 usecs calling trailer_init_module+0x0/0x14 @ 1 initcall trailer_init_module+0x0/0x14 returned 0 after 0 usecs calling mv88e6060_init+0x0/0x14 @ 1 initcall mv88e6060_init+0x0/0x14 returned 0 after 0 usecs calling mv88e6123_61_65_init+0x0/0x14 @ 1 initcall mv88e6123_61_65_init+0x0/0x14 returned 0 after 0 usecs calling mv88e6131_init+0x0/0x14 @ 1 initcall mv88e6131_init+0x0/0x14 returned 0 after 0 usecs calling dsa_init_module+0x0/0x12 @ 1 initcall dsa_init_module+0x0/0x12 returned 0 after 8 usecs calling dcbnl_init+0x0/0x32 @ 1 initcall dcbnl_init+0x0/0x32 returned 0 after 0 usecs calling mce_debugfs_init+0x0/0x3c @ 1 initcall mce_debugfs_init+0x0/0x3c returned 0 after 5 usecs calling severities_debugfs_init+0x0/0x3c @ 1 initcall severities_debugfs_init+0x0/0x3c returned 0 after 1 usecs calling hpet_insert_resource+0x0/0x23 @ 1 initcall hpet_insert_resource+0x0/0x23 returned 0 after 1 usecs calling update_mp_table+0x0/0x623 @ 1 initcall update_mp_table+0x0/0x623 returned 0 after 0 usecs calling lapic_insert_resource+0x0/0x3f @ 1 initcall lapic_insert_resource+0x0/0x3f returned -1 after 0 usecs initcall lapic_insert_resource+0x0/0x3f returned with error code -1 calling init_lapic_nmi_sysfs+0x0/0x39 @ 1 initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 0 usecs calling io_apic_bug_finalize+0x0/0x1b @ 1 initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs calling check_early_ioremap_leak+0x0/0x65 @ 1 initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs calling pat_memtype_list_init+0x0/0x29 @ 1 initcall pat_memtype_list_init+0x0/0x29 returned 0 after 2 usecs calling sched_init_debug+0x0/0x24 @ 1 initcall sched_init_debug+0x0/0x24 returned 0 after 1 usecs calling init_oops_id+0x0/0x36 @ 1 initcall init_oops_id+0x0/0x36 returned 0 after 2 usecs calling disable_boot_consoles+0x0/0x5c @ 1 initcall disable_boot_consoles+0x0/0x5c returned 0 after 0 usecs calling pm_qos_power_init+0x0/0xca @ 1 initcall pm_qos_power_init+0x0/0xca returned 0 after 91 usecs calling software_resume+0x0/0x201 @ 1 PM: Resume from disk failed. initcall software_resume+0x0/0x201 returned -2 after 87 usecs initcall software_resume+0x0/0x201 returned with error code -2 calling debugfs_kprobe_init+0x0/0x8f @ 1 initcall debugfs_kprobe_init+0x0/0x8f returned 0 after 16 usecs calling taskstats_init+0x0/0x95 @ 1 registered taskstats version 1 initcall taskstats_init+0x0/0x95 returned 0 after 97 usecs calling clear_boot_tracer+0x0/0x2d @ 1 initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs calling max_swapfiles_check+0x0/0x8 @ 1 initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs calling init_ima+0x0/0x1a @ 1 No TPM chip found, activating TPM-bypass! initcall init_ima+0x0/0x1a returned 0 after 145 usecs calling random32_reseed+0x0/0xb3 @ 1 initcall random32_reseed+0x0/0xb3 returned 0 after 8 usecs calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1 initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 1 usecs calling pci_sysfs_init+0x0/0x51 @ 1 initcall pci_sysfs_init+0x0/0x51 returned 0 after 851 usecs calling regulator_init_complete+0x0/0x13c @ 1 initcall regulator_init_complete+0x0/0x13c returned 0 after 0 usecs calling seqgen_init+0x0/0xf @ 1 initcall seqgen_init+0x0/0xf returned 0 after 9 usecs calling late_resume_init+0x0/0x124 @ 1 Magic number: 6:60:197 acpi PNP0100:00: hash matches initcall late_resume_init+0x0/0x124 returned 0 after 241 usecs calling scsi_complete_async_scans+0x0/0x113 @ 1 initcall scsi_complete_async_scans+0x0/0x113 returned 0 after 0 usecs calling rtc_hctosys+0x0/0x170 @ 1 rtc_cmos 00:04: setting system clock to 2010-08-16 21:09:49 UTC (1281992989) initcall rtc_hctosys+0x0/0x170 returned 0 after 160 usecs calling memmap_init+0x0/0xa3 @ 1 initcall memmap_init+0x0/0xa3 returned 0 after 23 usecs calling pci_mmcfg_late_insert_resources+0x0/0x15f @ 1 initcall pci_mmcfg_late_insert_resources+0x0/0x15f returned 0 after 1 usecs calling init_net_drop_monitor+0x0/0x151 @ 1 Initalizing network drop monitor service initcall init_net_drop_monitor+0x0/0x151 returned 0 after 99 usecs calling tcp_congestion_default+0x0/0x12 @ 1 initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 usecs calling initialize_hashrnd+0x0/0x19 @ 1 initcall initialize_hashrnd+0x0/0x19 returned 0 after 2 usecs async_waiting @ 1 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, DW10, max UDMA/33 ata4.00: configured for UDMA/33 async_waiting @ 62 ata3: SATA link down (SStatus 0 SControl 300) usb 1-1: new high speed USB device using ehci_hcd and address 2 async_waiting @ 59 usb 1-1: New USB device found, idVendor=05a9, idProduct=2640 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: Laptop Integrated Webcam usb 1-1: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3 usb 1-1: configuration #1 chosen from 1 choice ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) usb 6-2: new low speed USB device using uhci_hcd and address 2 input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input5 usb 6-2: New USB device found, idVendor=046d, idProduct=c517 usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-2: Product: USB Receiver usb 6-2: Manufacturer: Logitech usb 6-2: configuration #1 chosen from 1 choice input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input6 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input7 logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0 logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input8 logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1 ata1.00: ATA-8: TOSHIBA MK2546GSX, LB013D, max UDMA/100 ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/100 async_waiting @ 53 async_continuing @ 53 after 1 usec scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2546GS LB01 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 initcall 2_async_port_probe+0x0/0xb8 returned 0 after 1079398 usecs calling 7_sd_probe_async+0x0/0x1ef @ 53 async_continuing @ 58 after 1079582 usec initcall 3_async_port_probe+0x0/0xb8 returned 0 after 1079601 usecs async_continuing @ 59 after 709883 usec initcall 4_async_port_probe+0x0/0xb8 returned 0 after 1079610 usecs async_continuing @ 62 after 881949 usec sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H DW10 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sr 3:0:0:0: Attached scsi generic sg1 type 5 initcall 5_async_port_probe+0x0/0xb8 returned 0 after 1099100 usecs async_continuing @ 63 after 1099038 usec initcall 6_async_port_probe+0x0/0xb8 returned 0 after 1099419 usecs async_continuing @ 1 after 1001212 usec async_waiting @ 1 sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk initcall 7_sd_probe_async+0x0/0x1ef returned 0 after 95307 usecs async_continuing @ 1 after 73377 usec Freeing unused kernel memory: 940k freed Write protecting the kernel read-only data: 6620k dracut: dracut-006-2.fc14 usb 7-2: new full speed USB device using uhci_hcd and address 2 udev: starting version 160 calling video_output_class_init+0x0/0x19 [output] @ 99 initcall video_output_class_init+0x0/0x19 [output] returned 0 after 18 usecs calling acpi_video_init+0x0/0x77 [video] @ 99 initcall acpi_video_init+0x0/0x77 [video] returned 0 after 9 usecs calling i2c_init+0x0/0x6f [i2c_core] @ 99 initcall i2c_init+0x0/0x6f [i2c_core] returned 0 after 343 usecs calling drm_core_init+0x0/0x132 [drm] @ 99 [drm] Initialized drm 1.1.0 20060810 initcall drm_core_init+0x0/0x132 [drm] returned 0 after 138 usecs calling i915_init+0x0/0x52 [i915] @ 99 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 alloc irq_desc for 750 on node 0 alloc kstat_irqs on node 0 [drm] set up 7M of stolen space usb 7-2: New USB device found, idVendor=0a5c, idProduct=4500 usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 7-2: Product: BCM2045B2 usb 7-2: Manufacturer: Broadcom usb 7-2: configuration #1 chosen from 1 choice hub 7-2:1.0: USB hub found hub 7-2:1.0: 3 ports detected composite sync not supported usb 7-2.1: new full speed USB device using uhci_hcd and address 3 usb 7-2.1: New USB device found, idVendor=413c, idProduct=8126 usb 7-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 7-2.1: Product: BCM2045 usb 7-2.1: Manufacturer: Broadcom Corp usb 7-2.1: configuration #1 chosen from 1 choice usb 7-2.2: new full speed USB device using uhci_hcd and address 4 [drm] initialized overlay support usb 7-2.2: New USB device found, idVendor=0a5c, idProduct=4502 usb 7-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0 usb 7-2.2: Manufacturer: Broadcom Corp usb 7-2.2: configuration #1 chosen from 1 choice input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input9 generic-usb 0003:0A5C:4502.0003: input,hidraw2: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0 usb 7-2.3: new full speed USB device using uhci_hcd and address 5 usb 7-2.3: New USB device found, idVendor=0a5c, idProduct=4503 usb 7-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0 usb 7-2.3: Manufacturer: Broadcom Corp usb 7-2.3: configuration #1 chosen from 1 choice input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input10 generic-usb 0003:0A5C:4503.0004: input,hidraw3: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0 composite sync not supported fbcon: inteldrmfb (fb0) is primary device Console: switching to colour frame buffer device 160x50 fb0: inteldrmfb frame buffer device registered panic notifier acpi device:2f: registered as cooling_device0 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input11 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433) input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input12 ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 initcall i915_init+0x0/0x52 [i915] returned 0 after 1414825 usecs dracut: Starting plymouth daemon composite sync not supported calling fw_core_init+0x0/0x90 [firewire_core] @ 281 initcall fw_core_init+0x0/0x90 [firewire_core] returned 0 after 29 usecs calling fw_ohci_init+0x0/0x20 [firewire_ohci] @ 281 calling mmc_init+0x0/0x72 [mmc_core] @ 282 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 firewire_ohci 0000:02:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 initcall mmc_init+0x0/0x72 [mmc_core] returned 0 after 13969 usecs calling sdhci_drv_init+0x0/0x24 [sdhci] @ 282 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman initcall sdhci_drv_init+0x0/0x24 [sdhci] returned 0 after 787 usecs calling sdhci_drv_init+0x0/0x20 [sdhci_pci] @ 282 firewire_ohci: Added fw-ohci device 0000:02:09.0, OHCI version 1.10 initcall fw_ohci_init+0x0/0x20 [firewire_ohci] returned 0 after 63986 usecs sdhci-pci 0000:02:09.1: SDHCI controller found [1180:0822] (rev 22) xen: registering gsi 18 triggering 0 polarity 1 alloc irq_desc for 18 on node 0 alloc kstat_irqs on node 0 xen: --> irq=18 sdhci-pci 0000:02:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:02:09.1] using DMA initcall sdhci_drv_init+0x0/0x20 [sdhci_pci] returned 0 after 62963 usecs firewire_core: created device fw0: GUID 444fc00012d94c70, S400 calling wait_scan_init+0x0/0x12 [scsi_wait_scan] @ 373 initcall wait_scan_init+0x0/0x12 [scsi_wait_scan] returned 0 after 3 usecs dracut: Scanning devices sda7 for LVM volume groups dracut: Reading all physical volumes. This may take a while... dracut: Found volume group "vg0" using metadata type lvm2 dracut: 7 logical volume(s) in volume group "vg0" now active EXT4-fs (dm-7): mounted filesystem with ordered data mode dracut: Remounting /dev/disk/by-uuid/fcb47974-dd00-4990-bcee-e2b50a0f184b with -o noatime,ro EXT4-fs (dm-7): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/mapper/vg0-austen3a dracut: Loading SELinux policy SELinux: 8192 avtab hash slots, 198863 rules. SELinux: 8192 avtab hash slots, 198863 rules. SELinux: 9 users, 13 roles, 3316 types, 166 bools, 1 sens, 1024 cats SELinux: 77 classes, 198863 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-7, type ext4), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1281993003.608:2): policy loaded auid=4294967295 ses=4294967295 dracut: Switching root readahead: starting udev: starting version 151 type=1400 audit(1281989408.636:3): avc: denied { mmap_zero } for pid=606 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect calling microcode_init+0x0/0x132 [microcode] @ 710 platform microcode: firmware: requesting intel-ucode/06-17-06 calling acpi_wmi_init+0x0/0x187 [wmi] @ 779 ACPI: WMI: Mapper loaded initcall acpi_wmi_init+0x0/0x187 [wmi] returned 0 after 498 usecs calling serio_raw_init+0x0/0x20 [serio_raw] @ 625 initcall serio_raw_init+0x0/0x20 [serio_raw] returned 0 after 56 usecs calling joydev_init+0x0/0x12 [joydev] @ 624 initcall joydev_init+0x0/0x12 [joydev] returned 0 after 10 usecs calling dcdbas_init+0x0/0x67 [dcdbas] @ 714 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) initcall dcdbas_init+0x0/0x67 [dcdbas] returned 0 after 58 usecs calling rfkill_init+0x0/0x7a [rfkill] @ 651 initcall rfkill_init+0x0/0x7a [rfkill] returned 0 after 5783 usecs calling dell_wmi_init+0x0/0x12e [dell_wmi] @ 911 input: Dell WMI hotkeys as /devices/virtual/input/input13 initcall dell_wmi_init+0x0/0x12e [dell_wmi] returned 0 after 1332 usecs platform microcode: firmware: requesting intel-ucode/06-17-06 calling dell_init+0x0/0x335 [dell_laptop] @ 714 initcall dell_init+0x0/0x335 [dell_laptop] returned 0 after 2734 usecs Microcode Update Driver: v2.00 , Peter Oruba initcall microcode_init+0x0/0x132 [microcode] returned 0 after 289214 usecs calling bt_init+0x0/0x5a [bluetooth] @ 652 Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized initcall bt_init+0x0/0x5a [bluetooth] returned 0 after 1885 usecs calling i2c_i801_init+0x0/0xc5 [i2c_i801] @ 618 xen: registering gsi 17 triggering 0 polarity 1 xen_allocate_pirq: returning irq 17 for gsi 17 xen: --> irq=17 Already setup the GSI :17 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 initcall i2c_i801_init+0x0/0xc5 [i2c_i801] returned 0 after 251 usecs calling iTCO_vendor_init_module+0x0/0x1c [iTCO_vendor_support] @ 604 iTCO_vendor_support: vendor-support=0 initcall iTCO_vendor_init_module+0x0/0x1c [iTCO_vendor_support] returned 0 after 4 usecs calling snd_mem_init+0x0/0x2c [snd_page_alloc] @ 587 initcall snd_mem_init+0x0/0x2c [snd_page_alloc] returned 0 after 19 usecs calling cfg80211_init+0x0/0x92 [cfg80211] @ 599 cfg80211: Calling CRDA to update world regulatory domain initcall cfg80211_init+0x0/0x92 [cfg80211] returned 0 after 486 usecs calling sky2_init_module+0x0/0x2e [sky2] @ 612 sky2 driver version 1.25 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sky2 0000:09:00.0: setting latency timer to 64 sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0 alloc irq_desc for 749 on node 0 alloc kstat_irqs on node 0 sky2 eth0: addr 00:1d:09:4a:96:a6 initcall sky2_init_module+0x0/0x2e [sky2] returned 0 after 2484 usecs calling btusb_init+0x0/0x35 [btusb] @ 649 Bluetooth: Generic Bluetooth USB driver ver 0.6 calling videodev_init+0x0/0x89 [videodev] @ 641 Linux video capture interface: v2.00 initcall videodev_init+0x0/0x89 [videodev] returned 0 after 22 usecs usbcore: registered new interface driver btusb initcall btusb_init+0x0/0x35 [btusb] returned 0 after 57562 usecs calling iTCO_wdt_init_module+0x0/0x66 [iTCO_wdt] @ 604 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) initcall iTCO_wdt_init_module+0x0/0x66 [iTCO_wdt] returned 0 after 6645 usecs calling init_soundcore+0x0/0x9a [soundcore] @ 587 initcall init_soundcore+0x0/0x9a [soundcore] returned 0 after 50 usecs calling uvc_init+0x0/0xa2 [uvcvideo] @ 641 uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input14 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) initcall uvc_init+0x0/0xa2 [uvcvideo] returned 0 after 11727 usecs calling alsa_sound_init+0x0/0x96 [snd] @ 587 initcall alsa_sound_init+0x0/0x96 [snd] returned 0 after 45 usecs calling ieee80211_init+0x0/0x1e [mac80211] @ 599 initcall ieee80211_init+0x0/0x1e [mac80211] returned 0 after 3 usecs calling alsa_timer_init+0x0/0x1a7 [snd_timer] @ 587 initcall alsa_timer_init+0x0/0x1a7 [snd_timer] returned 0 after 725 usecs cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) calling alsa_pcm_init+0x0/0x71 [snd_pcm] @ 968 initcall alsa_pcm_init+0x0/0x71 [snd_pcm] returned 0 after 17 usecs calling alsa_seq_device_init+0x0/0x60 [snd_seq_device] @ 974 initcall alsa_seq_device_init+0x0/0x60 [snd_seq_device] returned 0 after 12 usecs calling alsa_seq_init+0x0/0x4c [snd_seq] @ 974 initcall alsa_seq_init+0x0/0x4c [snd_seq] returned 0 after 387 usecs calling alsa_hwdep_init+0x0/0x69 [snd_hwdep] @ 587 initcall alsa_hwdep_init+0x0/0x69 [snd_hwdep] returned 0 after 9 usecs calling alsa_card_azx_init+0x0/0x20 [snd_hda_intel] @ 587 xen: registering gsi 21 triggering 0 polarity 1 xen_allocate_pirq: returning irq 21 for gsi 21 xen: --> irq=21 Already setup the GSI :21 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:1b.0: setting latency timer to 64 calling iwl_init+0x0/0x7b [iwlagn] @ 599 iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds iwlagn: Copyright(c) 2003-2009 Intel Corporation xen: registering gsi 17 triggering 0 polarity 1 xen_allocate_pirq: returning irq 17 for gsi 17 xen: --> irq=17 Already setup the GSI :17 iwlagn 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:0b:00.0: setting latency timer to 64 iwlagn 0000:0b:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 iwlagn 0000:0b:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels alloc irq_desc for 748 on node 0 alloc kstat_irqs on node 0 calling crypto_ecb_module_init+0x0/0x12 [ecb] @ 998 initcall crypto_ecb_module_init+0x0/0x12 [ecb] returned 0 after 3 usecs calling patch_intelhdmi_init+0x0/0x12 [snd_hda_codec_intelhdmi] @ 996 initcall patch_intelhdmi_init+0x0/0x12 [snd_hda_codec_intelhdmi] returned 0 after 1 usecs calling arc4_init+0x0/0x12 [arc4] @ 1000 initcall arc4_init+0x0/0x12 [arc4] returned 0 after 280 usecs phy0: Selected rate control algorithm 'iwl-agn-rs' initcall iwl_init+0x0/0x7b [iwlagn] returned 0 after 208772 usecs calling patch_sigmatel_init+0x0/0x12 [snd_hda_codec_idt] @ 1002 initcall patch_sigmatel_init+0x0/0x12 [snd_hda_codec_idt] returned 0 after 0 usecs ALSA sound/pci/hda/hda_codec.c:3881: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3885: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3889: hp_outs=2 (0xa/0xf/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3890: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3893: dig-out=0x21/0x0 ALSA sound/pci/hda/hda_codec.c:3901: inputs: mic=0xc, fmic=0xe, line=0x0, fline=0x0, cd=0x0, aux=0x0 ALSA sound/pci/hda/patch_sigmatel.c:2980: stac92xx: dac_nids=2 (0x2/0x5/0x0/0x0/0x0) input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input15 ALSA sound/pci/hda/hda_codec.c:2914: HDMI already defined input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 initcall alsa_card_azx_init+0x0/0x20 [snd_hda_intel] returned 0 after 393470 usecs cfg80211: Calling CRDA for country: GB cfg80211: Regulatory domain changed to country: GB (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) calling uinput_init+0x0/0x12 [uinput] @ 1089 initcall uinput_init+0x0/0x12 [uinput] returned 0 after 378 usecs calling xenfs_init+0x0/0x6a [xenfs] @ 1095 initcall xenfs_init+0x0/0x6a [xenfs] returned 0 after 31 usecs SELinux: initialized (dev xenfs, type xenfs), uses genfs_contexts calling evtchn_init+0x0/0x6e [xen_evtchn] @ 1097 Event-channel device installed. initcall evtchn_init+0x0/0x6e [xen_evtchn] returned 0 after 566 usecs calling wait_scan_init+0x0/0x12 [scsi_wait_scan] @ 1108 initcall wait_scan_init+0x0/0x12 [scsi_wait_scan] returned 0 after 2 usecs EXT4-fs (dm-7): warning: maximal mount count reached, running e2fsck is recommended SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts calling inet6_init+0x0/0x2ba [ipv6] @ 1299 NET: Registered protocol family 10 lo: Disabled Privacy Extensions initcall inet6_init+0x0/0x2ba [ipv6] returned 0 after 1323 usecs calling ip6_tables_init+0x0/0xb8 [ip6_tables] @ 1300 ip6_tables: (C) 2000-2006 Netfilter Core Team initcall ip6_tables_init+0x0/0xb8 [ip6_tables] returned 0 after 19 usecs calling ip6table_filter_init+0x0/0x69 [ip6table_filter] @ 1302 initcall ip6table_filter_init+0x0/0x69 [ip6table_filter] returned 0 after 7 usecs calling nf_conntrack_l3proto_ipv6_init+0x0/0x11a [nf_conntrack_ipv6] @ 1304 initcall nf_conntrack_l3proto_ipv6_init+0x0/0x11a [nf_conntrack_ipv6] returned 0 after 33 usecs calling reject_tg6_init+0x0/0x12 [ip6t_REJECT] @ 1306 initcall reject_tg6_init+0x0/0x12 [ip6t_REJECT] returned 0 after 0 usecs calling physdev_mt_init+0x0/0x12 [xt_physdev] @ 1321 initcall physdev_mt_init+0x0/0x12 [xt_physdev] returned 0 after 1 usecs sky2 eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready iwlagn 0000:0b:00.0: firmware: requesting iwlwifi-4965-2.ucode iwlagn 0000:0b:00.0: loaded firmware version 228.61.2.24 calling l2cap_init+0x0/0xe4 [l2cap] @ 1534 Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized initcall l2cap_init+0x0/0xe4 [l2cap] returned 0 after 7 usecs calling bnep_init+0x0/0xa0 [bnep] @ 1539 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast initcall bnep_init+0x0/0xa0 [bnep] returned 0 after 4 usecs calling llc_init+0x0/0x20 [llc] @ 1549 initcall llc_init+0x0/0x20 [llc] returned 0 after 0 usecs calling br_init+0x0/0xcf [bridge] @ 1549 Bridge firewalling registered Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready initcall br_init+0x0/0xcf [bridge] returned 0 after 82634 usecs calling sco_init+0x0/0xeb [sco] @ 1555 Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized initcall sco_init+0x0/0xeb [sco] returned 0 after 7 usecs calling rfcomm_init+0x0/0xd4 [rfcomm] @ 1582 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 initcall rfcomm_init+0x0/0xd4 [rfcomm] returned 0 after 1116 usecs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs alloc irq_desc for 747 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 746 on node 0 alloc kstat_irqs on node 0 XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state virbr0: starting userspace STP failed, starting kernel STP calling nf_nat_init+0x0/0x119 [nf_nat] @ 1697 initcall nf_nat_init+0x0/0x119 [nf_nat] returned 0 after 44 usecs calling nf_nat_standalone_init+0x0/0x82 [iptable_nat] @ 1697 initcall nf_nat_standalone_init+0x0/0x82 [iptable_nat] returned 0 after 12 usecs calling masquerade_tg_init+0x0/0x39 [ipt_MASQUERADE] @ 1699 initcall masquerade_tg_init+0x0/0x39 [ipt_MASQUERADE] returned 0 after 5 usecs calling ebtables_init+0x0/0x4e [ebtables] @ 1709 Ebtables v2.0 registered initcall ebtables_init+0x0/0x4e [ebtables] returned 0 after 3 usecs calling ebtable_nat_init+0x0/0x41 [ebtable_nat] @ 1712 initcall ebtable_nat_init+0x0/0x41 [ebtable_nat] returned 0 after 21 usecs SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs lo: Disabled Privacy Extensions SELinux: initialized (dev proc, type proc), uses genfs_contexts btusb_intr_complete: hci0 urb ffff88000306c300 failed to resubmit (1) btusb_bulk_complete: hci0 urb ffff8800d83d5e40 failed to resubmit (1) btusb_bulk_complete: hci0 urb ffff8800d9ccce40 failed to resubmit (1)