Thanks for the very detailed review, all the comments make perfect
sense, we'll address them in the next version of the series.
On Thu, 12 Aug 2010, Blue Swirl wrote:
> On Thu, Aug 12, 2010 at 2:09 PM, <stefano.stabellini@xxxxxxxxxxxxx> wrote:
> > From: Anthony PERARD <anthony.perard@xxxxxxxxxx>
> >
> > Introduce a new emulated PCI device, specific to fully virtualized Xen
> > guests. The device is necessary for PV on HVM drivers to work.
>
> The code should be converted to qdev and VMState.
>
> >
> > Signed-off-by: Anthony PERARD <anthony.perard@xxxxxxxxxx>
> > Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
> > ---
> > Makefile.target | 1 +
> > hw/xen_machine_fv.c | 4 +
> > hw/xen_platform.c | 452
> > +++++++++++++++++++++++++++++++++++++++++++++++++++
> > hw/xen_platform.h | 9 +
> > 4 files changed, 466 insertions(+), 0 deletions(-)
> > create mode 100644 hw/xen_platform.c
> > create mode 100644 hw/xen_platform.h
> >
> > diff --git a/Makefile.target b/Makefile.target
> > index d1b63f2..1984cdd 100644
> > --- a/Makefile.target
> > +++ b/Makefile.target
> > @@ -324,6 +324,7 @@ obj-xen-y += pc.o
> > obj-xen-y += piix_pci.o
> > obj-xen-y += mc146818rtc.o
> > obj-xen-y += xenstore.o
> > +obj-xen-y += xen_platform.o
> >
> > obj-xen-y += xen_mapcache.o
> > obj-xen-y += stub-functions.o
> > diff --git a/hw/xen_machine_fv.c b/hw/xen_machine_fv.c
> > index 114addf..ec826e7 100644
> > --- a/hw/xen_machine_fv.c
> > +++ b/hw/xen_machine_fv.c
> > @@ -35,6 +35,7 @@
> > #include "xen_common.h"
> > #include "xen_backend.h"
> > #include "xenstore.h"
> > +#include "xen_platform.h"
> > #include "xen/hvm/hvm_info_table.h"
> >
> > #define MAX_IDE_BUS 2
> > @@ -93,6 +94,9 @@ static void xen_init_fv(ram_addr_t ram_size,
> >
> > pc_vga_init(pci_bus);
> >
> > + pci_xen_platform_init(pci_bus);
> > + platform_fixed_ioport_init();
> > +
> > /* init basic PC hardware */
> > pc_basic_device_init(isa_irq, &floppy_controller, &rtc_state);
> >
> > diff --git a/hw/xen_platform.c b/hw/xen_platform.c
> > new file mode 100644
> > index 0000000..85d3f8b
> > --- /dev/null
> > +++ b/hw/xen_platform.c
> > @@ -0,0 +1,452 @@
> > +/*
> > + * XEN platform pci device, formerly known as the event channel device
> > + *
> > + * Copyright (c) 2003-2004 Intel Corp.
> > + * Copyright (c) 2006 XenSource
> > + *
> > + * Permission is hereby granted, free of charge, to any person obtaining a
> > copy
> > + * of this software and associated documentation files (the "Software"),
> > to deal
> > + * in the Software without restriction, including without limitation the
> > rights
> > + * to use, copy, modify, merge, publish, distribute, sublicense, and/or
> > sell
> > + * copies of the Software, and to permit persons to whom the Software is
> > + * furnished to do so, subject to the following conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be included
> > in
> > + * all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
> > OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
> > OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > FROM,
> > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> > IN
> > + * THE SOFTWARE.
> > + */
> > +
> > +#include "hw.h"
> > +#include "pc.h"
> > +#include "pci.h"
> > +#include "irq.h"
> > +#include "xen_common.h"
> > +#include "net.h"
> > +#include "xen_platform.h"
> > +#include "xen_backend.h"
> > +#include "qemu-log.h"
> > +
> > +#include <assert.h>
> > +#include <xenguest.h>
> > +
> > +static int drivers_blacklisted;
> > +static uint16_t driver_product_version;
> > +static int throttling_disabled;
> > +static char log_buffer[4096];
> > +static int log_buffer_off;
> > +
> > +static uint8_t platform_flags;
>
> A lot of static variables. Could you put these to PCIXenPlatformState?
>
> > +
> > +#define PFFLAG_ROM_LOCK 1 /* Sets whether ROM memory area is RW or RO */
> > +
> > +typedef struct PCIXenPlatformState
> > +{
> > + PCIDevice pci_dev;
> > +} PCIXenPlatformState;
> > +
> > +
> > +/* We throttle access to dom0 syslog, to avoid DOS attacks. This is
> > + modelled as a token bucket, with one token for every byte of log.
> > + The bucket size is 128KB (->1024 lines of 128 bytes each) and
> > + refills at 256B/s. It starts full. The guest is blocked if no
> > + tokens are available when it tries to generate a log message. */
> > +#define BUCKET_MAX_SIZE (128*1024)
> > +#define BUCKET_FILL_RATE 256
> > +
> > +static void throttle(unsigned count)
> > +{
> > + static unsigned available;
> > + static struct timespec last_refil;
> > + static int started;
> > + static int warned;
> > +
> > + struct timespec waiting_for, now;
> > + double delay;
> > + struct timespec ts;
> > +
> > + if (throttling_disabled)
> > + return;
> > +
> > + if (!started) {
> > + clock_gettime(CLOCK_MONOTONIC, &last_refil);
> > + available = BUCKET_MAX_SIZE;
> > + started = 1;
> > + }
> > +
> > + if (count > BUCKET_MAX_SIZE) {
> > + fprintf(stderr, "tried to get %d tokens, but bucket size is %d\n",
> > + BUCKET_MAX_SIZE, count);
> > + exit(1);
> > + }
> > +
> > + if (available < count) {
> > + /* The bucket is empty. Refil it */
> > +
> > + /* When will it be full enough to handle this request? */
> > + delay = (double)(count - available) / BUCKET_FILL_RATE;
> > + waiting_for = last_refil;
> > + waiting_for.tv_sec += delay;
> > + waiting_for.tv_nsec += (delay - (int)delay) * 1e9;
> > + if (waiting_for.tv_nsec >= 1000000000) {
> > + waiting_for.tv_nsec -= 1000000000;
> > + waiting_for.tv_sec++;
> > + }
> > +
> > + /* How long do we have to wait? (might be negative) */
> > + clock_gettime(CLOCK_MONOTONIC, &now);
> > + ts.tv_sec = waiting_for.tv_sec - now.tv_sec;
> > + ts.tv_nsec = waiting_for.tv_nsec - now.tv_nsec;
> > + if (ts.tv_nsec < 0) {
> > + ts.tv_sec--;
> > + ts.tv_nsec += 1000000000;
> > + }
> > +
> > + /* Wait for it. */
> > + if (ts.tv_sec > 0 ||
> > + (ts.tv_sec == 0 && ts.tv_nsec > 0)) {
> > + if (!warned) {
> > + fprintf(stderr, "throttling guest access to syslog");
> > + warned = 1;
> > + }
> > + while (nanosleep(&ts, &ts) < 0 && errno == EINTR)
> > + ;
> > + }
> > +
> > + /* Refil */
> > + clock_gettime(CLOCK_MONOTONIC, &now);
> > + delay = (now.tv_sec - last_refil.tv_sec) +
> > + (now.tv_nsec - last_refil.tv_nsec) * 1.0e-9;
> > + available += BUCKET_FILL_RATE * delay;
> > + if (available > BUCKET_MAX_SIZE)
> > + available = BUCKET_MAX_SIZE;
> > + last_refil = now;
> > + }
> > +
> > + assert(available >= count);
> > +
> > + available -= count;
> > +}
> > +
> > +#define UNPLUG_ALL_IDE_DISKS 1
> > +#define UNPLUG_ALL_NICS 2
> > +#define UNPLUG_AUX_IDE_DISKS 4
>
> These should go to the top of the file. Are they even used, the
> function below doesn't?
>
> > +
> > +static void platform_fixed_ioport_write2(void *opaque, uint32_t addr,
> > uint32_t val)
> > +{
> > + switch (addr - 0x10) {
>
> 0x10 should be a #define, which should be used...
>
> > + case 0:
> > + /* Unplug devices. Value is a bitmask of which devices to
> > + unplug, with bit 0 the IDE devices, bit 1 the network
> > + devices, and bit 2 the non-primary-master IDE devices. */
> > + break;
> > + case 2:
> > + switch (val) {
> > + case 1:
> > + fprintf(stderr, "Citrix Windows PV drivers loaded in guest\n");
> > + break;
> > + case 0:
> > + fprintf(stderr, "Guest claimed to be running PV product 0?\n");
> > + break;
> > + default:
> > + fprintf(stderr, "Unknown PV product %d loaded in guest\n",
> > val);
> > + break;
> > + }
> > + driver_product_version = val;
> > + break;
> > + }
> > +}
> > +
> > +static void platform_fixed_ioport_write4(void *opaque, uint32_t addr,
> > + uint32_t val)
> > +{
> > + switch (addr - 0x10) {
>
> ... here ...
>
> > + case 0:
> > + /* PV driver version */
> > + break;
> > + }
> > +}
> > +
> > +static void platform_fixed_ioport_write1(void *opaque, uint32_t addr,
> > uint32_t val)
> > +{
> > + switch (addr - 0x10) {
>
> ... here ...
>
> > + case 0: /* Platform flags */ {
> > + hvmmem_type_t mem_type = (val & PFFLAG_ROM_LOCK) ?
> > + HVMMEM_ram_ro : HVMMEM_ram_rw;
> > + if (xc_hvm_set_mem_type(xen_xc, xen_domid, mem_type, 0xc0, 0x40))
> > + fprintf(stderr,"platform_fixed_ioport: unable to change ro/rw "
> > + "state of ROM memory area!\n");
>
> Please introduce a macro (DPRINTF) and use that.
>
> > + else {
> > + platform_flags = val & PFFLAG_ROM_LOCK;
> > + fprintf(stderr,"platform_fixed_ioport: changed ro/rw "
> > + "state of ROM memory area. now is %s state.\n",
> > + (mem_type == HVMMEM_ram_ro ? "ro":"rw"));
> > + }
> > + break;
> > + }
> > + case 2:
> > + /* Send bytes to syslog */
> > + if (val == '\n' || log_buffer_off == sizeof(log_buffer) - 1) {
> > + /* Flush buffer */
> > + log_buffer[log_buffer_off] = 0;
> > + throttle(log_buffer_off);
> > + fprintf(stderr, "%s\n", log_buffer);
> > + log_buffer_off = 0;
> > + break;
> > + }
> > + log_buffer[log_buffer_off++] = val;
> > + break;
> > + }
> > +}
> > +
> > +static uint32_t platform_fixed_ioport_read2(void *opaque, uint32_t addr)
> > +{
> > + switch (addr - 0x10) {
>
> ... here ...
>
> > + case 0:
> > + if (drivers_blacklisted) {
> > + /* The drivers will recognise this magic number and refuse
> > + * to do anything. */
> > + return 0xd249;
> > + } else {
> > + /* Magic value so that you can identify the interface. */
> > + return 0x49d2;
> > + }
> > + default:
> > + return 0xffff;
> > + }
> > +}
> > +
> > +static uint32_t platform_fixed_ioport_read1(void *opaque, uint32_t addr)
> > +{
> > + switch (addr - 0x10) {
>
> ... here ...
>
> > + case 0:
> > + /* Platform flags */
> > + return platform_flags;
> > + case 2:
> > + /* Version number */
> > + return 1;
> > + default:
> > + return 0xff;
> > + }
> > +}
> > +
> > +static void platform_fixed_ioport_save(QEMUFile *f, void *opaque)
> > +{
> > + qemu_put_8s(f, &platform_flags);
> > +}
> > +
> > +static int platform_fixed_ioport_load(QEMUFile *f, void *opaque, int
> > version_id)
> > +{
> > + uint8_t flags;
> > +
> > + if (version_id > 1)
> > + return -EINVAL;
> > +
> > + qemu_get_8s(f, &flags);
> > + platform_fixed_ioport_write1(NULL, 0x10, flags);
> > +
> > + return 0;
> > +}
> > +
> > +void platform_fixed_ioport_init(void)
> > +{
> > + register_savevm(NULL, "platform_fixed_ioport", 0, 1,
> > platform_fixed_ioport_save,
> > + platform_fixed_ioport_load, NULL);
>
> Please use VMState instead.
>
> > +
> > + register_ioport_write(0x10, 16, 4, platform_fixed_ioport_write4, NULL);
>
> and here and below. In fact, just s/0x10/XEN_PLATFORM_IOPORT/g.
>
> > + register_ioport_write(0x10, 16, 2, platform_fixed_ioport_write2, NULL);
> > + register_ioport_write(0x10, 16, 1, platform_fixed_ioport_write1, NULL);
> > + register_ioport_read(0x10, 16, 2, platform_fixed_ioport_read2, NULL);
> > + register_ioport_read(0x10, 16, 1, platform_fixed_ioport_read1, NULL);
> > +
> > + platform_fixed_ioport_write1(NULL, 0x10, 0);
>
> Introduce a reset function which performs something similar.
>
> > +}
> > +
> > +static uint32_t xen_platform_ioport_readb(void *opaque, uint32_t addr)
> > +{
> > + addr &= 0xff;
> > +
> > + return (addr == 0) ? platform_fixed_ioport_read1(NULL, 0x10) : ~0u;
>
> Just use if.
>
> > +}
> > +
> > +static void xen_platform_ioport_writeb(void *opaque, uint32_t addr,
> > uint32_t val)
> > +{
> > + addr &= 0xff;
> > + val &= 0xff;
> > +
> > + switch (addr) {
> > + case 0: /* Platform flags */
> > + platform_fixed_ioport_write1(NULL, 0x10, val);
> > + break;
> > + case 8:
> > + {
> > + if (val == '\n' || log_buffer_off == sizeof(log_buffer) - 1) {
> > + /* Flush buffer */
> > + log_buffer[log_buffer_off] = 0;
> > + throttle(log_buffer_off);
> > + fprintf(stderr, "%s\n", log_buffer);
> > + log_buffer_off = 0;
> > + break;
> > + }
> > + log_buffer[log_buffer_off++] = val;
> > + }
> > + break;
> > + default:
> > + break;
> > + }
> > +}
> > +
> > +static void platform_ioport_map(PCIDevice *pci_dev, int region_num,
> > pcibus_t addr, pcibus_t size, int type)
> > +{
> > + PCIXenPlatformState *d = (PCIXenPlatformState *)pci_dev;
>
> Useless cast in C. Moreover, you should use DO_UPCAST or container_of.
>
> > + register_ioport_write(addr, size, 1, xen_platform_ioport_writeb, d);
> > + register_ioport_read(addr, size, 1, xen_platform_ioport_readb, d);
> > +}
> > +
> > +static uint32_t platform_mmio_read(void *opaque, target_phys_addr_t addr)
> > +{
> > + static int warnings = 0;
> > + if (warnings < 5) {
> > + fprintf(stderr, "Warning: attempted read from physical address "
> > + "0x%"PRIx64" in xen platform mmio space\n",
> > (uint64_t)addr);
>
> Instead of the cast, you should use TARGET_FMT_plx.
>
> > + warnings++;
> > + }
> > + return 0;
> > +}
> > +
> > +static void platform_mmio_write(void *opaque, target_phys_addr_t addr,
> > + uint32_t val)
> > +{
> > + static int warnings = 0;
> > + if (warnings < 5) {
> > + fprintf(stderr, "Warning: attempted write of 0x%x to physical "
> > + "address 0x%"PRIx64" in xen platform mmio space\n",
> > + val, (uint64_t)addr);
> > + warnings++;
> > + }
> > + return;
> > +}
> > +
> > +static CPUReadMemoryFunc *platform_mmio_read_funcs[3] = {
>
> These should be 'const'.
>
> > + platform_mmio_read,
> > + platform_mmio_read,
> > + platform_mmio_read,
> > +};
> > +
> > +static CPUWriteMemoryFunc *platform_mmio_write_funcs[3] = {
> > + platform_mmio_write,
> > + platform_mmio_write,
> > + platform_mmio_write,
> > +};
> > +
> > +static void platform_mmio_map(PCIDevice *d, int region_num,
> > + pcibus_t addr, pcibus_t size, int type)
> > +{
> > + int mmio_io_addr;
> > +
> > + mmio_io_addr = cpu_register_io_memory(platform_mmio_read_funcs,
> > + platform_mmio_write_funcs, NULL);
> > +
> > + cpu_register_physical_memory(addr, 0x1000000, mmio_io_addr);
> > +}
> > +
> > +struct pci_config_header {
> > + uint16_t vendor_id;
> > + uint16_t device_id;
> > + uint16_t command;
> > + uint16_t status;
> > + uint8_t revision;
> > + uint8_t api;
> > + uint8_t subclass;
> > + uint8_t class;
> > + uint8_t cache_line_size; /* Units of 32 bit words */
> > + uint8_t latency_timer; /* In units of bus cycles */
> > + uint8_t header_type; /* Should be 0 */
> > + uint8_t bist; /* Built in self test */
> > + uint32_t base_address_regs[6];
> > + uint32_t reserved1;
> > + uint16_t subsystem_vendor_id;
> > + uint16_t subsystem_id;
> > + uint32_t rom_addr;
> > + uint32_t reserved3;
> > + uint32_t reserved4;
> > + uint8_t interrupt_line;
> > + uint8_t interrupt_pin;
> > + uint8_t min_gnt;
> > + uint8_t max_lat;
> > +};
>
> Why can't you use the facilities from pci.h?
>
> > +
> > +static void xen_pci_save(QEMUFile *f, void *opaque)
> > +{
> > + PCIXenPlatformState *d = opaque;
> > + uint64_t t = 0;
> > +
> > + pci_device_save(&d->pci_dev, f);
> > + qemu_put_be64s(f, &t);
> > +}
> > +
> > +static int xen_pci_load(QEMUFile *f, void *opaque, int version_id)
> > +{
> > + PCIXenPlatformState *d = opaque;
> > + int ret;
> > +
> > + if (version_id > 3)
> > + return -EINVAL;
> > +
> > + ret = pci_device_load(&d->pci_dev, f);
> > + if (ret < 0)
> > + return ret;
> > +
> > + if (version_id >= 2) {
> > + if (version_id == 2) {
> > + uint8_t flags;
> > + qemu_get_8s(f, &flags);
> > + xen_platform_ioport_writeb(d, 0, flags);
> > + }
> > + qemu_get_be64(f);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +void pci_xen_platform_init(PCIBus *bus)
> > +{
> > + PCIXenPlatformState *d;
> > + struct pci_config_header *pch;
> > +
> > + printf("Register xen platform.\n");
> > + d = (PCIXenPlatformState *)pci_register_device(
> > + bus, "xen-platform", sizeof(PCIXenPlatformState), -1, NULL, NULL);
> > + pch = (struct pci_config_header *)d->pci_dev.config;
> > + pch->vendor_id = 0x5853;
>
> You should use pci_set_word etc. Please add 0x5853 to pci_ids.h.
>
> > + pch->device_id = 0x0001;
> > + pch->command = 3; /* IO and memory access */
> > + pch->revision = 1;
> > + pch->api = 0;
> > + pch->subclass = 0x80; /* Other */
> > + pch->class = 0xff; /* Unclassified device class */
> > + pch->header_type = 0;
> > + pch->interrupt_pin = 1;
> > +
> > + /* Microsoft WHQL requires non-zero subsystem IDs. */
> > + /* http://www.pcisig.com/reflector/msg02205.html. */
> > + pch->subsystem_vendor_id = pch->vendor_id; /* Duplicate vendor id. */
> > + pch->subsystem_id = 0x0001; /* Hardcode sub-id as 1. */
> > +
> > + pci_register_bar(&d->pci_dev, 0, 0x100,
> > + PCI_BASE_ADDRESS_SPACE_IO, platform_ioport_map);
> > +
> > + /* reserve 16MB mmio address for share memory*/
> > + pci_register_bar(&d->pci_dev, 1, 0x1000000,
> > + PCI_BASE_ADDRESS_MEM_PREFETCH,
> > platform_mmio_map);
> > +
> > + register_savevm(NULL, "platform", 0, 3, xen_pci_save, xen_pci_load, d);
> > + printf("Done register platform.\n");
> > +}
> > +
> > diff --git a/hw/xen_platform.h b/hw/xen_platform.h
> > new file mode 100644
> > index 0000000..6eeff22
> > --- /dev/null
> > +++ b/hw/xen_platform.h
> > @@ -0,0 +1,9 @@
> > +#ifndef XEN_PLATFORM_H
> > +#define XEN_PLATFORM_H
> > +
> > +#include "hw/pci.h"
> > +
> > +void pci_xen_platform_init(PCIBus *bus);
> > +void platform_fixed_ioport_init(void);
> > +
> > +#endif
> > --
> > 1.7.0.4
> >
> >
> >
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home