Hi, jeremy:
I changed to another newer machine, with Fedora 13, 64bit, Xen
4.0-testing, origin/xen-stable-2.6.32.x
it shows the following errors:
is this some problem with my memory?
Thanks very much!
\ \/ /___ _ __ | || | / _ \ / | _ __ ___| ___|
\ // _ \ '_ \ | || |_| | | || |__| '__/ __|___ \
/ \ __/ | | | |__ _| |_| || |__| | | (__ ___) |
/_/\_\___|_| |_| |_|(_)___(_)_| |_| \___|____/
(XEN) Xen version 4.0.1-rc5 (xisisu@xxxxxxxxxxxxx) (gcc version 4.4.4
20100630 (Red Hat 4.4.4-10) (GCC) ) Mon Aug 2 14:08:01 CDT 2010
(XEN) Latest ChangeSet: Mon Aug 02 11:18:41 2010 +0100 21296:e7bd619f8aaa
(XEN) Console output is synchronous.
(XEN) Command line: dom0_mem=1024M dom0_max_vcpus=1 dom0_vcpus_pin=0
loglvl=all guest_loglvl=all sync_console console_to_ring
com1=115200,8n1 console=com1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009a800 (usable)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cfdffc00 (usable)
(XEN) 00000000cfdffc00 - 00000000cfe53c00 (ACPI NVS)
(XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
(XEN) 00000000cfe55c00 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fed00400 (reserved)
(XEN) 00000000fed20000 - 00000000feda0000 (reserved)
(XEN) 00000000fee00000 - 00000000fef00000 (reserved)
(XEN) 00000000ffb00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000128000000 (usable)
(XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL )
(XEN) ACPI: XSDT 000FC7CD, 0074 (r1 DELL B10K 15 ASL 61)
(XEN) ACPI: FACP 000FC8FD, 00F4 (r3 DELL B10K 15 ASL 61)
(XEN) ACPI: DSDT FFE9CFCA, 545E (r1 DELL dt_ex 1000 INTL 20050624)
(XEN) ACPI: FACS CFDFFC00, 0040
(XEN) ACPI: SSDT FFEA2547, 00AA (r1 DELL st_ex 1000 INTL 20050624)
(XEN) ACPI: APIC 000FC9F1, 0092 (r1 DELL B10K 15 ASL 61)
(XEN) ACPI: BOOT 000FCA83, 0028 (r1 DELL B10K 15 ASL 61)
(XEN) ACPI: ASF! 000FCAAB, 0096 (r32 DELL B10K 15 ASL 61)
(XEN) ACPI: MCFG 000FCB41, 003E (r1 DELL B10K 15 ASL 61)
(XEN) ACPI: HPET 000FCB7F, 0038 (r1 DELL B10K 15 ASL 61)
(XEN) ACPI: TCPA 000FCDDB, 0032 (r1 DELL B10K 15 ASL 61)
(XEN) ACPI: ____ 000FCE0D, 0030 (r1 DELL B10K 15 ASL 61)
(XEN) ACPI: SLIC 000FCBB7, 0176 (r1 DELL B10K 15 ASL 61)
(XEN) System RAM: 3965MB (4060772kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000128000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fe710
(XEN) DMI 2.5 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[cfdffc0c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
(XEN) Processor #2 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
(XEN) Processor #3 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2660.081 MHz processor.
(XEN) Initing memory sharing.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs disabled.
(XEN) HVM: VMX enabled
(XEN) xsave_init: cpu0: cntxt_max_size: 0x240 and states: 00000000:00000003
(XEN) xsave_init: using cntxt_size: 0x240 and states: 00000000:00000003
(XEN) Intel machine check reporting enabled
(XEN) I/O virtualisation disabled
(XEN) xsave_init: cpu1: cntxt_max_size: 0x240 and states: 00000000:00000003
(XEN) xsave_init: cpu2: cntxt_max_size: 0x240 and states: 00000000:00000003
(XEN) xsave_init: cpu3: cntxt_max_size: 0x240 and states: 00000000:00000003
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 4 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
ˇ(XEN) Allocated console ring of 32 KiB.
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) Brought up 4 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
(XEN) HPET: 8 timers in total, 8 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1a5c000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000118000000->0000000120000000 (229376 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81a5c000
(XEN) Init. ramdisk: ffffffff81a5c000->ffffffff84601600
(XEN) Phys-Mach map: ffffffff84602000->ffffffff84802000
(XEN) Start info: ffffffff84802000->ffffffff848024b4
(XEN) Page tables: ffffffff84803000->ffffffff8482c000
(XEN) Boot stack: ffffffff8482c000->ffffffff8482d000
(XEN) TOTAL: ffffffff80000000->ffffffff84c00000
(XEN) ENTRY ADDRESS: ffffffff81829200
(XEN) Dom0 has maximum 1 VCPUs
(XEN) Scrubbing Free RAM: ............................done.
(XEN) trace.c:89:d32767 calc_tinfo_first_offset: NR_CPUs 128,
offset_in_bytes 258, t_info_first_offset 65
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen)
(XEN) Freed 188kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32.16 (xisisu@xxxxxxxxxxxxxxxxxxxxxxxxx) (gcc
version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #2 SMP Mon Aug 2
15:03:12 CDT 2010
Command line: ro root=/dev/mapper/vg_flamenco118-lv_root console=hvc0
earlyprintk=xen nomodeset
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
xen_release_chunk: looking at area pfn 9b-a0: 5 pages freed
released 5 pages of unused memory
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000000009a800 (usable)
Xen: 00000000000a0000 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 0000000040000000 (usable)
Xen: 00000000cfdffc00 - 00000000cfe53c00 (ACPI NVS)
Xen: 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
Xen: 00000000cfe55c00 - 00000000d0000000 (reserved)
Xen: 00000000e0000000 - 00000000f0000000 (reserved)
Xen: 00000000fec00000 - 00000000fed00400 (reserved)
Xen: 00000000fed20000 - 00000000feda0000 (reserved)
Xen: 00000000fee00000 - 00000000fef00000 (reserved)
Xen: 00000000ffb00000 - 0000000100000000 (reserved)
bootconsole [xenboot0] enabled
DMI 2.5 present.
last_pfn = 0x40000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
init_memory_mapping: 0000000000000000-0000000040000000
RAMDISK: 01a5c000 - 04601600
ACPI: RSDP 00000000000fec00 00024 (v02 DELL )
ACPI: XSDT 00000000000fc7cd 00074 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: FACP 00000000000fc8fd 000F4 (v03 DELL B10K 00000015 ASL 00000061)
ACPI: DSDT 00000000ffe9cfca 0545E (v01 DELL dt_ex 00001000 INTL 20050624)
ACPI: FACS 00000000cfdffc00 00040
ACPI: SSDT 00000000ffea2547 000AA (v01 DELL st_ex 00001000 INTL 20050624)
ACPI: APIC 00000000000fc9f1 00092 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: BOOT 00000000000fca83 00028 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: ASF! 00000000000fcaab 00096 (v32 DELL B10K 00000015 ASL 00000061)
ACPI: MCFG 00000000000fcb41 0003E (v01 DELL B10K 00000015 ASL 00000061)
ACPI: HPET 00000000000fcb7f 00038 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: TCPA 00000000000fcddb 00032 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: ____ 00000000000fce0d 00030 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: SLIC 00000000000fcbb7 00176 (v01 DELL B10K 00000015 ASL 00000061)
No NUMA configuration found
Faking a node at 0000000000000000-0000000040000000
Bootmem setup node 0 0000000000000000-0000000040000000
NODE_DATA [0000000000008000 - 000000000001dfff]
bootmap [000000000001e000 - 0000000000025fff] pages 8
(8 early reservations) ==> bootmem [0000000000 - 0040000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0004803000 - 000482c000] XEN PAGETABLES ==> [0004803000 - 000482c000]
#2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#3 [0001000000 - 0001a3b300] TEXT DATA BSS ==> [0001000000 - 0001a3b300]
#4 [0001a5c000 - 0004601600] RAMDISK ==> [0001a5c000 - 0004601600]
#5 [0004602000 - 0004803000] XEN START INFO ==> [0004602000 - 0004803000]
#6 [0001a3c000 - 0001a3c1a0] BRK ==> [0001a3c000 - 0001a3c1a0]
#7 [0000100000 - 00002d6000] PGTABLE ==> [0000100000 - 00002d6000]
found SMP MP-table at [ffff8800000fe710] fe710
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009a
0: 0x00000100 -> 0x00040000
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ERROR: Unable to locate IOAPIC for GSI 2
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ERROR: Unable to locate IOAPIC for GSI 9
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 1 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:8fdffc00)
Booting paravirtualized kernel on Xen
Xen version: 4.0.1-rc5 (preserve-AD) (dom0)
NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880004862000 s90264 r8192 d24424 u122880
pcpu-alloc: s90264 r8192 d24424 u122880 alloc=30*4096
pcpu-alloc: [0] 0
Xen: using vcpu_info placement
Built 1 zonelists in Node order, mobility grouping on. Total pages: 257985
Policy zone: DMA32
Kernel command line: ro root=/dev/mapper/vg_flamenco118-lv_root
console=hvc0 earlyprintk=xen nomodeset
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
DMA: Placing 64MB software IO TLB between ffff880005a36000 - ffff880009a36000
DMA: software IO TLB at phys 0x5a36000 - 0x9a36000
xen_swiotlb_fixup: buf=ffff880005a36000 size=67108864
xen_swiotlb_fixup: buf=ffff880009a96000 size=32768
Memory: 908072k/1048576k available (4481k kernel code, 408k absent,
140096k reserved, 3775k data, 804k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:512
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
xen_allocate_pirq: returning irq 9 for gsi 9
xen: acpi sci 9
Console: colour VGA+ 80x25
console [hvc0] enabled, bootconsole disabled
console [hvc0] enabled, bootconsole disabled
allocated 10485760 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
installing Xen timer for CPU 0
Detected 2660.080 MHz processor.
Calibrating delay loop (skipped), value calculated using timer
frequency.. 5320.16 BogoMIPS (lpj=2660080)
Security Framework initialized
SELinux: Initializing.
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys debug
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 0/0x0 -> Node 0
CPU: Unsupported number of siblings 4
mce: CPU supports 6 MCE banks
Performance Events: unsupported p6 CPU model 23 no PMU driver,
software events only.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 34k freed
ACPI: Core revision 20090903
cpu 0 spinlock event irq 510
Brought up 1 CPUs
devtmpfs: initialized
Grant table initialized
regulator: core version 0.5
Time: 20:21:27 Date: 08/02/10
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ERROR: Unable to locate IOAPIC for GSI 9
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 7F
(20090903/tbutils-314)
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1e.0: transparent bridge
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:03.0
(XEN) PCI add device 00:03.2
(XEN) PCI add device 00:03.3
(XEN) PCI add device 00:19.0
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1a.1
(XEN) PCI add device 00:1a.2
(XEN) PCI add device 00:1a.7
(XEN) PCI add device 00:1b.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.1
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) PCI add device 00:1d.2
(XEN) PCI add device 00:1d.7
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 01:00.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
xen_balloon: Initialising balloon driver with page order 0.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource xen
pnp: PnP ACPI init
ACPI: bus type pnp registered
xen_allocate_pirq: returning irq 13 for gsi 13
xen_allocate_pirq: returning irq 8 for gsi 8
xen_allocate_pirq: returning irq 7 for gsi 7
xen_allocate_pirq: returning irq 4 for gsi 4
Already setup the GSI :4
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x800-0x85f has been reserved
system 00:01: ioport range 0xc00-0xc7f has been reserved
system 00:01: ioport range 0x860-0x8ff has been reserved
PM-Timer failed consistency check (0x0xffffff) - aborting.
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xd000-0xdfff
pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x1000-0x1fff
pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
pci 0000:00:1c.0: PREFETCH window: 0x00000040000000-0x000000401fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: 0x2000-0x2fff
pci 0000:00:1c.1: MEM window: 0xfe700000-0xfe7fffff
pci 0000:00:1c.1: PREFETCH window: 0x00000040200000-0x000000403fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xen_allocate_pirq: returning irq 16 for gsi 16
Already setup the GSI :16
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 44693k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
DMA: Placing 64MB software IO TLB between ffff880005a36000 - ffff880009a36000
DMA: software IO TLB at phys 0x5a36000 - 0x9a36000
Simple Boot Flag at 0x7a set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1280780490.590:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1860
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [VBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Event-channel device installed.
blktap_device_init: blktap device major 253
blktap_ring_init: blktap ring major: 251
registering netback
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
xen_allocate_pirq: returning irq 17 for gsi 17
Already setup the GSI :17
serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
0000:00:03.3: ttyS0 at I/O 0xec98 (irq = 17) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x2f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems sxs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 498
ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 498
ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 498
ata4: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970280 irq 498
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 498
Fixed MDIO Bus: probed
NetXen Network Driver version 4.0.50
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfebda000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32.16 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32.16 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xen_allocate_pirq: returning irq 16 for gsi 16
Already setup the GSI :16
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32.16 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xen_allocate_pirq: returning irq 17 for gsi 17
Already setup the GSI :17
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32.16 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xen_allocate_pirq: returning irq 22 for gsi 22
Already setup the GSI :22
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32.16 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
ata2: SATA link down (SStatus 4 SControl 300)
usb usb5: configuration #1 chosen from 1 choice
ata4: SATA link down (SStatus 4 SControl 300)
hub 5-0:1.0: USB hub found
ata6: SATA link down (SStatus 0 SControl 300)
hub 5-0:1.0: 2 ports detected
xen_allocate_pirq: returning irq 23 for gsi 23
Already setup the GSI :23
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32.16 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xen_allocate_pirq: returning irq 17 for gsi 17
Already setup the GSI :17
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32.16 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xen_allocate_pirq: returning irq 18 for gsi 18
Already setup the GSI :18
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32.16 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (8140 buckets, 32560 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
usb 4-1: new low speed USB device using uhci_hcd and address 2
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 6:107:396
rtc_cmos 00:05: setting system clock to 2010-08-02 20:21:31 UTC (1280780491)
Initalizing network drop monitor service
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: ST3250310AS, 4.ADA, max UDMA/133
ata1.00: 488281250 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: ATAPI: Optiarc DVD+/-RW AD-7200S, 102A, max UDMA/100
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3250310AS 4.AD PQ: 0 ANSI: 5
ata3.00: configured for UDMA/100
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda:
scsi 2:0:0:0: CD-ROM Optiarc DVD+-RW AD-7200S 102A PQ: 0 ANSI: 5
sda1 sda2 sda3 sda4 <sr0: scsi3-mmc drive: 48x/48x writer dvd-ram
cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi generic sg1 type 5
sda5 >
usb 4-1: New USB device found, idVendor=413c, idProduct=2003
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: Dell USB Keyboard
usb 4-1: Manufacturer: Dell
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 804k freed
Write protecting the kernel read-only data: 6656k
usb 4-1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as
/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input3
dracut: dracut-005-3.fc13
generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard
[Dell Dell USB Keyboard] on usb-0000:00:1a.1-1/input0
udev: starting version 151
usb 7-2: new low speed USB device using uhci_hcd and address 2
[drm] Initialized drm 1.1.0 20060810
[drm] VGACON disable radeon kernel modesetting.
xen_allocate_pirq: returning irq 16 for gsi 16
Already setup the GSI :16
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
usb 7-2: New USB device found, idVendor=0461, idProduct=4d22
usb 7-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 7-2: Product: USB Optical Mouse
usb 7-2: configuration #1 chosen from 1 choice
dracut: Starting plymouth daemon
input: USB Optical Mouse as
/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input4
%Ggeneric-usb 0003:0461:4D22.0002: input,hidraw1: USB HID v1.11 Mouse
[USB Optical Mouse] on usb-0000:00:1d.1-2/input0
xen_allocate_pirq: returning irq 18 for gsi 18
Already setup the GSI :18
pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pata_acpi 0000:00:03.2: PCI INT C disabled
%Gdracut: Scanning devices sda5 for LVM volume groups
dracut: Reading all physical volumes. This may take a while...
dracut: Found volume group "vg_flamenco118" using metadata type lvm2
dracut: 3 logical volume(s) in volume group "vg_flamenco118" now active
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/vg_flamenco118-lv_root
dracut: Loading SELinux policy
type=1404 audit(1280780493.624:2): enforcing=1 old_enforcing=0
auid=4294967295 ses=4294967295
type=1403 audit(1280780493.969:3): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
readahead: starting
Welcome to Fedora
Press 'I' to enter interactive startup.
Starting udev: %G[ OK ]
Setting hostname flamenco118.cse.wustl.edu: [ OK ]
Setting up Logical Volume Management: 3 logical volume(s) in volume
group "vg_flamenco118" now active
[ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/mapper/vg_flamenco118-lv_root
Fedora-13-x86_64: clean, 170293/3088384 files, 1327568/12345344 blocks
[/sbin/fsck.ext4 (1) -- /boot] fsck.ext4 -a /dev/sda3
/dev/sda3: clean, 51/128016 files, 94614/512000 blocks
[/sbin/fsck.ext4 (1) -- /home] fsck.ext4 -a /dev/mapper/vg_flamenco118-lv_home
/dev/mapper/vg_flamenco118-lv_home: clean, 103716/2918832 files,
2025555/11673600 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
Entering non-interactive startup
Starting monitoring for VG vg_flamenco118: 3 logical volume(s) in
volume group "vg_flamenco118" monitored
[ OK ]
ip6tables: Applying firewall rules: [ OK ]
iptables: Applying firewall rules: [ OK ]
Starting portreserve: [ OK ]
Starting system logger: [ OK ]
Starting irqbalance: [ OK ]
Starting rpcbind: [ OK ]
Starting mdmonitor: [ OK ]
Starting system message bus: [ OK ]
Setting network parameters... [ OK ]
Starting NetworkManager daemon: [ OK ]
Starting Avahi daemon... [ OK ]
Starting NFS statd: [ OK ]
Starting RPC idmapd: [ OK ]
Starting cups: [ OK ]
Mounting other filesystems: [ OK ]
Starting acpi daemon: [ OK ]
Starting HAL daemon: [ OK ]
Retrigger failed udev events[ OK ]
Starting PC/SC smart card daemon (pcscd): [ OK ]
Enabling Bluetooth devices:
Starting sendmail: [ OK ]
Starting sm-client: [ OK ]
Starting abrt daemon: [ OK ]
Starting ksm: [ OK ]
Starting console mouse services: [ OK ]
Starting ksmtuned: [ OK ]
Starting crond: [ OK ]
[ OK ]
Starting atd: [ OK ]
[ OK ]
Starting libvirtd daemon: [ OK ]
Fedora release 13 (Goddard)
Kernel 2.6.32.16 on an x86_64 (/dev/hvc0)
flamenco118.cse.wustl.edu login: (XEN) mm.c:3852:d0 Bad page
00000000000b918f: ed=ffff830124ff0000(0), sd=ffff830124ff0000,
caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b6850: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b72e5: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b9100: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b6a26: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b9687: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b69ac: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b698d: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b729c: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b728d: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b726c: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b725d: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b72b6: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b72b5: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000bafcf: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000baa1e: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b6902: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b6930: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b711a: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b6fb2: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b6e78: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b6af7: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b6605: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000baf9a: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000badf9: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b692e: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b6fdc: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000badfc: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b69ff: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b6604: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b6fd3: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b6fd4: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000badfd: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000cfa51: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000cfa50: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b698f: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b698e: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000baa04: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000baa35: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b728f: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b728e: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b725f: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b725e: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000badff: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000badfe: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000baa3c: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000baa4d: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000baa37: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000baa36: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000baa4f: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000baa4e: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b69ab: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b69aa: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b69a9: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b69a8: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b729b: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b729a: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b7299: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b7298: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b726b: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b726a: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000baa5c: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b661d: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b7269: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b7268: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b661f: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b661e: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b6603: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
(XEN) mm.c:3852:d0 Bad page 00000000000b6602: ed=ffff830124ff0000(0),
sd=ffff830124ff0000, caf=8000000000000002, taf=7400000000000001
On Mon, Aug 2, 2010 at 1:02 PM, Sisu Xi <xisisu@xxxxxxxxx> wrote:
> Hi, Jeremy:
>
> gmail does not allow me to attach such a long file as plain text... I
> put it in the attachment..
>
> and the lspci gives:
> 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory
> Controller Hub (rev 02)
> 00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root
> Port (rev 02)
> 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ
> Integrated Graphics Controller (rev 02)
> 00:02.1 Display controller: Intel Corporation 82945G/GZ Integrated
> Graphics Controller (rev 02)
> 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express
> Port 1 (rev 01)
> 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express
> Port 2 (rev 01)
> 00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI
> Controller #1 (rev 01)
> 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI
> Controller #2 (rev 01)
> 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI
> Controller #3 (rev 01)
> 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI
> Controller #4 (rev 01)
> 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI
> Controller (rev 01)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
> 00:1e.2 Multimedia audio controller: Intel Corporation 82801G (ICH7
> Family) AC'97 Audio Controller (rev 01)
> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
> Interface Bridge (rev 01)
> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
> Controller (rev 01)
> 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE
> Controller (rev 01)
> 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
> 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751
> Gigabit Ethernet PCI Express (rev 01)
> 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
>
> Sorry I have already removed my graphic card.. It looks like some ATI card..
>
> Thanks.
>
> Yours,
> Sisu
>
> On Mon, Aug 2, 2010 at 11:54 AM, Jeremy Fitzhardinge <jeremy@xxxxxxxx> wrote:
>> On 07/30/2010 02:21 PM, Sisu Xi wrote:
>>>
>>> Sorry I forgot to attach the serial console output:
>>>
>>> ¸
>>>
>>
>> Did you send the full serial output from the "kernel BUG at
>> arch/x86/mm/highmem_32.c:45!" crash? Could you (re)send?
>>
>> Thanks,
>> J
>>
>
--
Sisu Xi, PhD Student
Department of Computer Science and Engineering
Campus Box 1045
Washington University in St. Louis
One Brookings Drive
St. Louis, MO 63130
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home