While I'm using 'xl create' to install centos 5,
I got following error. But with the same config,
'xm create' succesfully installed the vm.
So I wonder if this is a bug of xl?
Below is the config and xl output, If it doesn't
help, ask me for more imformations if you want.
config:
==========================================
kernel = "/mnt/images/xen/vmlinuz"
ramdisk = "/mnt/images/xen/initrd.img"
extra = "text"
name = "centos"
memory = "256"
disk = [ 'file:/home/yanghy/vm/centos.img,xvda,w' ]
vif = [ 'bridge=eth0' ]
vcpus=1
on_reboot = 'destroy'
on_crash = 'destroy'
=======================================
# xl create -c installconf
Parsing config file installconf
Linux version 2.6.18-8.el5xen (mockbuild@xxxxxxxxxxxxxxxxxxx) (gcc version
4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Thu Mar 15 21:02:53 EDT 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000010800000 (usable)
0MB HIGHMEM available.
264MB LOWMEM available.
NX (Execute Disable) protection: active
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 67584
Kernel command line: text
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c071b000 soft=c06fb000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Xen reported: 2660.040 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Software IO TLB disabled
vmalloc area: d1000000-f4ffe000, maxmem 2d7fe000
Memory: 248192k/270336k available (2017k kernel code, 13636k reserved, 824k
data, 172k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6653.26 BogoMIPS (lpj=13306533)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 6488k freed
Grant table initialized
NET: Registered protocol family 16
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06CAAA0 could not
acquire Mutex [2] [20060707]
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx>
audit: initializing netlink socket (disabled)
audit(1276102736.369:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key EE79A493AEE5EDC9
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Linux version 2.6.18-8.el5xen (mockbuild@xxxxxxxxxxxxxxxxxxx) (gcc version
4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Thu Mar 15 21:02:53 EDT 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000010800000 (usable)
0MB HIGHMEM available.
264MB LOWMEM available.
NX (Execute Disable) protection: active
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 67584
Kernel command line: text
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c071b000 soft=c06fb000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Xen reported: 2660.040 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Software IO TLB disabled
vmalloc area: d1000000-f4ffe000, maxmem 2d7fe000
Memory: 248192k/270336k available (2017k kernel code, 13636k reserved, 824k
data, 172k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6653.26 BogoMIPS (lpj=13306533)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 6488k freed
Grant table initialized
NET: Registered protocol family 16
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06CAAA0 could not
acquire Mutex [2] [20060707]
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx>
audit: initializing netlink socket (disabled)
audit(1276102736.369:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key EE79A493AEE5EDC9
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Welcome to CentOS
+--------+ Loading SCSI driver +---------+
| |
| Loading xenblk driver...Oops: 0000 [#1]|
SMP | |
last sysfs file: +----------------------------------------+
Modules linked in: xenblk xennet iscsi_tcp libiscsi scsi_transport_iscsi sr_mod
sd_mod scsi_mod ide_cd cdrom ipv6 squashfs pcspkr loop nfs nfs_acl fscache
lockd sunrpc vfat fat cramfs
CPU: 0
EIP: 0061:[<d1126b53>] Not tainted VLI
EFLAGS: 00010887 (2.6.18-8.el5xen #1)
EIP is at blkif_int+0x5a/0x16b [xenblk]
eax: 18009c00 ebx: cff0c000 ecx: c06c7f8c edx: 00000002
esi: 00000000 edi: ca000100 ebp: cff010ac esp: c071bfa4
ds: 007b es: 007b ss: 0069
Process swapper (pid: 0, ti=c071b000 task=c0653940 task.ti=c06c7000)creen
Stack: 44d73ea8 00000001 00000002 00000000 fffee2d0 c0cb6e40 00000000 00000000
00000106 c043ec9b c06c7f8c c06bb728 c06bb700 00000106 fffffffe c043ed58
c06c7f8c c0cb6e40 c06c7f5c 00000106 c06c7f8c fffffffe c040672b
Call Trace:
[<c043ec9b>] handle_IRQ_event+0x27/0x51
[<c043ed58>] __do_IRQ+0x93/0xe8
[<c040672b>] do_IRQ+0x93/0xae
[<c053a045>] evtchn_do_upcall+0x64/0x9b
[<c0404ec5>] hypervisor_callback+0x3d/0x48
[<c0407fd1>] raw_safe_halt+0x8c/0xaf
[<c0402bca>] xen_idle+0x22/0x2e
[<c0402ce9>] cpu_idle+0x91/0xab
[<c06cc799>] start_kernel+0x381/0x388
=======================
Code: e8 89 f6 8b 43 20 89 44 24 04 e9 c3 00 00 00 8b 43 24 31 f6 48 23 44 24
04 6b c0 6c 8d 68 40 03 6b 28 8b 7d 00 69 c7 9c 00 00 00 <8b> 94 18 e8 00 00 00
8d 44 18 7c 89 44 24 10 89 14 24 eb 12 8b
EIP: [<d1126b53>] blkif_int+0x5a/0x16b [xenblk] SS:ESP 0069:c071bfa4
<0>Kernel panic - not syncing: Fatal exception in interrupt
#
--
Regards
Yang Hongyang
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home