Base on the following two pieces of information, it looks like device 05:08.0
is not PCI visible but is generating DMA traffic.
1)
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 203a09000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 203a09
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
2)
> > (XEN) PCI add device 00:00.0
> > (XEN) PCI add device 00:01.0
> > (XEN) PCI add device 00:03.0
> > (XEN) PCI add device 00:07.0
> > (XEN) PCI add device 00:14.0
> > (XEN) PCI add device 00:14.1
> > (XEN) PCI add device 00:14.2
> > (XEN) PCI add device 00:14.3
> > (XEN) PCI add device 00:16.0
> > (XEN) PCI add device 00:16.1
> > (XEN) PCI add device 00:16.2
> > (XEN) PCI add device 00:16.3
> > (XEN) PCI add device 00:16.4
> > (XEN) PCI add device 00:16.5
> > (XEN) PCI add device 00:16.6
> > (XEN) PCI add device 00:16.7
> > (XEN) PCI add device 00:1a.0
> > (XEN) PCI add device 00:1a.1
> > (XEN) PCI add device 00:1a.2
> > (XEN) PCI add device 00:1a.7
> > (XEN) PCI add device 00:1b.0
> > (XEN) PCI add device 00:1c.0
> > (XEN) PCI add device 00:1c.4
> > (XEN) PCI add device 00:1c.5
> > (XEN) PCI add device 00:1d.0
> > (XEN) PCI add device 00:1d.1
> > (XEN) PCI add device 00:1d.2
> > (XEN) PCI add device 00:1d.7
> > (XEN) PCI add device 00:1e.0
> > (XEN) PCI add device 00:1f.0
> > (XEN) PCI add device 00:1f.2
> > (XEN) PCI add device 00:1f.3
> > (XEN) PCI add device 01:00.0
> > (XEN) PCI add device 03:00.0
> > (XEN) PCI add device 04:00.0
> > (XEN) PCI add device 04:00.2
> > (XEN) PCI add device 05:0e.0
> > (XEN) PCI add device 07:00.0
> > (XEN) PCI add device 08:00.0
-----Original Message-----
From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of M. Nunberg
Sent: Sunday, May 30, 2010 11:33 AM
To: Pasi Kärkkäinen
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-devel] iommuu/vt-d issues with LSI MegaSAS (PERC5i)
Here is the full log, kernel + xen
\ \/ /___ _ __ | || | / _ \ / | _ __ ___/ |
\ // _ \ '_ \ | || |_| | | || |__| '__/ __| |
/ \ __/ | | | |__ _| |_| || |__| | | (__| |
/_/\_\___|_| |_| |_|(_)___(_)_| |_| \___|_|
(XEN) Xen version 4.0.1-rc1 (mordy@) (gcc version 4.3.2 (Debian
4.3.2-1.1) ) Fri May 28 16:46:04 PDT 2010
(XEN) Latest ChangeSet: Sat May 22 07:18:16 2010 +0100
21162:370fd9f97c70
(XEN) Console output is synchronous.
(XEN) Command line: iommu=verbose loglvl=all guest_loglvl=all
sync_console console_to_rint com1=115200,8n1 console=com1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009a000 (usable)
(XEN) 000000000009a000 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bf760000 (usable)
(XEN) 00000000bf76e000 - 00000000bf770000 type 9
(XEN) 00000000bf770000 - 00000000bf77e000 (ACPI data)
(XEN) 00000000bf77e000 - 00000000bf7d0000 (ACPI NVS)
(XEN) 00000000bf7d0000 - 00000000bf7e0000 (reserved)
(XEN) 00000000bf7ec000 - 00000000c0000000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ffc00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000340000000 (usable)
(XEN) ACPI: RSDP 000F9E10, 0024 (r2 ACPIAM)
(XEN) ACPI: XSDT BF770100, 0094 (r1 NEC 20090424 MSFT
97)
(XEN) ACPI: FACP BF770290, 00F4 (r4 042409 FACP1917 20090424 MSFT
97)
(XEN) ACPI: DSDT BF770670, 5BFB (r2 10601 10601000 0 INTL
20051117)
(XEN) ACPI: FACS BF77E000, 0040
(XEN) ACPI: APIC BF770390, 00D2 (r2 042409 APIC1917 20090424 MSFT
97)
(XEN) ACPI: MCFG BF770470, 003C (r1 042409 OEMMCFG 20090424 MSFT
97)
(XEN) ACPI: SLIC BF7704B0, 0176 (r1 NEC 20090424 MSFT
97)
(XEN) ACPI: ERST BF770630, 0040 (r1 042409 WHEA1917 20090424 MSFT
97)
(XEN) ACPI: OEMB BF77E040, 007B (r1 042409 OEMB1917 20090424 MSFT
97)
(XEN) ACPI: SRAT BF77A670, 01D0 (r1 042409 OEMSRAT 1 INTL
1)
(XEN) ACPI: HPET BF77A840, 0038 (r1 042409 OEMHPET 20090424 MSFT
97)
(XEN) ACPI: DMAR BF77E0C0, 0118 (r1 AMI OEMDMAR 1 MSFT
97)
(XEN) ACPI: SSDT BF781DF0, 0363 (r1 DpgPmm CpuPm 12 INTL
20051117)
(XEN) ACPI: EINJ BF77A880, 0130 (r1 AMIER AMI_EINJ 20090424 MSFT
97)
(XEN) ACPI: BERT BF77AA10, 0030 (r1 AMIER AMI_BERT 20090424 MSFT
97)
(XEN) ACPI: ERST BF77AA40, 01B0 (r1 AMIER AMI_ERST 20090424 MSFT
97)
(XEN) ACPI: HEST BF77ABF0, 00A8 (r1 AMIER AMI_HEST 20090424 MSFT
97)
(XEN) System RAM: 12278MB (12573672kB)
(XEN) SRAT: PXM 0 -> APIC 0 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 2 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 4 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 6 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 1 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 3 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 5 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 7 -> Node 0
(XEN) SRAT: PXM 1 -> APIC 16 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 18 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 20 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 22 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 17 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 19 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 21 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 23 -> Node 1
(XEN) SRAT: Node 0 PXM 0 0-a0000
(XEN) SRAT: Node 0 PXM 0 100000-c0000000
(XEN) SRAT: Node 0 PXM 0 100000000-1c0000000
(XEN) SRAT: Node 1 PXM 1 1c0000000-340000000
(XEN) NUMA: Allocated memnodemap from 33fdfb000 - 33fdff000
(XEN) NUMA: Using 8 for the hash shift.
(XEN) Domain heap initialised DMA width 30 bits
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[bf77e00c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x10] enabled)
(XEN) Processor #16 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
(XEN) Processor #2 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled)
(XEN) Processor #18 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
(XEN) Processor #4 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
(XEN) Processor #20 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
(XEN) Processor #6 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled)
(XEN) Processor #22 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled)
(XEN) Processor #1 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
(XEN) Processor #17 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x03] enabled)
(XEN) Processor #3 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x13] enabled)
(XEN) Processor #19 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x05] enabled)
(XEN) Processor #5 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x15] enabled)
(XEN) Processor #21 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x07] enabled)
(XEN) Processor #7 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x17] enabled)
(XEN) Processor #23 7:10 APIC version 21
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
(XEN) Overriding APIC driver with bigsmp
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Phys. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0xffffffff base: 0xfed00000
(XEN) [VT-D]dmar.c:679: Host address width 40
(XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:398: dmaru->address = fbffe000
(XEN) [VT-D]dmar.c:340: IOAPIC: f0:1f.7
(XEN) [VT-D]dmar.c:411: flags: INCLUDE_ALL
(XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:334: endpoint: 0:1d.1
(XEN) [VT-D]dmar.c:334: endpoint: 0:1d.2
(XEN) [VT-D]dmar.c:334: endpoint: 0:1d.7
(XEN) [VT-D]dmar.c:334: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:334: endpoint: 0:1a.1
(XEN) [VT-D]dmar.c:334: endpoint: 0:1a.2
(XEN) [VT-D]dmar.c:334: endpoint: 0:1a.7
(XEN) [VT-D]dmar.c:571: RMRR region: base_addr ec000 end_address effff
(XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:334: endpoint: 0:1d.1
(XEN) [VT-D]dmar.c:334: endpoint: 0:1d.2
(XEN) [VT-D]dmar.c:334: endpoint: 0:1d.7
(XEN) [VT-D]dmar.c:334: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:334: endpoint: 0:1a.1
(XEN) [VT-D]dmar.c:334: endpoint: 0:1a.2
(XEN) [VT-D]dmar.c:334: endpoint: 0:1a.7
(XEN) [VT-D]dmar.c:571: RMRR region: base_addr bf7ec000 end_address
bf7fffff
(XEN) [VT-D]dmar.c:704: found ACPI_DMAR_ATSR:
(XEN) [VT-D]dmar.c:599: atsru->all_ports: 0
(XEN) [VT-D]dmar.c:320: bridge: 0:1.0 start = 0 sec = 1 sub = 1
(XEN) [VT-D]dmar.c:320: bridge: 0:3.0 start = 0 sec = 2 sub = 2
(XEN) [VT-D]dmar.c:320: bridge: 0:7.0 start = 0 sec = 3 sub = 3
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: Not using MMCONFIG.
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2266.784 MHz processor.
(XEN) Initing memory sharing.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Intel machine check reporting enabled
(XEN) [VT-D]iommu.c:1078: drhd->address = fbffe000 iommu->reg =
ffff82c3fff57000
(XEN) [VT-D]iommu.c:1080: cap = c90780106f0462 ecap = f0207e
(XEN) Intel VT-d Snoop Control not supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation supported.
(XEN) Intel VT-d Interrupt Remapping supported.
(XEN) I/O virtualisation enabled
(XEN) I/O virtualisation for PV guests disabled
(XEN) Total of 16 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) TSC is reliable, synchronization unnecessary
(XEN) Platform timer is 14.318MHz HPET
ÿ(XEN) Allocated console ring of 128 KiB.
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) microcode.c:73:d32767 microcode: CPU9 resumed
(XEN) microcode.c:73:d32767 microcode: CPU6 resumed
(XEN) microcode.c:73:d32767 microcode: CPU14 resumed
(XEN) microcode.c:73:d32767 microcode: CPU7 resumed
(XEN) microcode.c:73:d32767 microcode: CPU15 resumed
(XEN) microcode.c:73:d32767 microcode: CPU10 resumed
(XEN) microcode.c:73:d32767 microcode: CPU13 resumed
(XEN) microcode.c:73:d32767 microcode: CPU5 resumed
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
(XEN) microcode.c:73:d32767 microcode: CPU11 resumed
(XEN) microcode.c:73:d32767 microcode: CPU12 resumed
(XEN) microcode.c:73:d32767 microcode: CPU8 resumed
(XEN) microcode.c:73:d32767 microcode: CPU4 resumed
(XEN) Brought up 16 CPUs
(XEN) Turbo Mode detected!
(XEN) HPET's MSI mode hasn't been supported when Interrupt Remapping is
enabled.
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:0.0
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.0
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.1
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.2
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:14.3
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.0
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.1
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.2
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.3
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.4
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.5
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.6
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.7
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.2
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.7
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:1b.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.2
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.7
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.2
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.3
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 1:0.0
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 3:0.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 5:e.0
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 7:0.0
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 8:0.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:0.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:0.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:2.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:2.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:2.4
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:2.5
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:3.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:3.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:3.2
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:3.4
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:4.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:4.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:4.2
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:4.3
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:5.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:5.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:5.2
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:5.3
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:6.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:6.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:6.2
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:6.3
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:0.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:0.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.4
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.5
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.2
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.4
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.2
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.3
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.2
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.3
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:6.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:6.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:6.2
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:6.3
(XEN) [VT-D]iommu.c:695: iommu_enable_translation: iommu->reg =
ffff82c3fff57000
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x26b6000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000100000000->0000000120000000 (2937039 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff826b6000
(XEN) Init. ramdisk: ffffffff826b6000->ffffffff8f7d7600
(XEN) Phys-Mach map: ffffffff8f7d8000->ffffffff90f40678
(XEN) Start info: ffffffff90f41000->ffffffff90f414b4
(XEN) Page tables: ffffffff90f42000->ffffffff90fcf000
(XEN) Boot stack: ffffffff90fcf000->ffffffff90fd0000
(XEN) TOTAL: ffffffff80000000->ffffffff91400000
(XEN) ENTRY ADDRESS: ffffffff819be200
(XEN) Dom0 has maximum 16 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by
ensuring
(XEN) ******* that all output is synchronously delivered on the serial
line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen)
(XEN) Freed 180kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32.13 (mordy@debmed) (gcc version 4.3.2 (Debian
4.3.2-1.1) ) #3 SMP Fri May 28 13:20:24 PDT 2010
Command line: root=/dev/mapper/MISC-fedora ro nomodeset console=hvc0
earlyprintk=xen debug initcall_debug loglvel=10
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
xen_release_chunk: looking at area pfn bf760-bf76e: 14 pages freed
xen_release_chunk: looking at area pfn bf7e0-bf7ec: 12 pages freed
xen_release_chunk: looking at area pfn c0000-fec00: 257024 pages freed
xen_release_chunk: looking at area pfn fec01-fee00: 511 pages freed
xen_release_chunk: looking at area pfn fee01-ffc00: 3583 pages freed
released 261144 pages of unused memory
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000000009a000 (usable)
Xen: 000000000009a000 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 00000000bf760000 (usable)
Xen: 00000000bf76e000 - 00000000bf770000 type 9
Xen: 00000000bf770000 - 00000000bf77e000 (ACPI data)
Xen: 00000000bf77e000 - 00000000bf7d0000 (ACPI NVS)
Xen: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
Xen: 00000000bf7ec000 - 00000000c0000000 (reserved)
Xen: 00000000fec00000 - 00000000fec01000 (reserved)
Xen: 00000000fee00000 - 00000000fee01000 (reserved)
Xen: 00000000ffc00000 - 0000000100000000 (reserved)
Xen: 0000000100000000 - 00000002ed0cf000 (usable)
bootconsole [xenboot0] enabled
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==>
(reserved)
last_pfn = 0x2ed0cf max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
last_pfn = 0xbf760 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf760000
0000000000 - 00bf760000 page 4k
kernel direct mapping tables up to bf760000 @ 100000-700000
init_memory_mapping: 0000000100000000-00000002ed0cf000
0100000000 - 02ed0cf000 page 4k
kernel direct mapping tables up to 2ed0cf000 @ 10fcf000-12745000
RAMDISK: 026b6000 - 0f7d7600
ACPI: RSDP 00000000000f9e10 00024 (v02 ACPIAM)
ACPI: XSDT 00000000bf770100 00094 (v01 NEC 20090424 MSFT
00000097)
ACPI: FACP 00000000bf770290 000F4 (v04 042409 FACP1917 20090424 MSFT
00000097)
ACPI: DSDT 00000000bf770670 05BFB (v02 10601 10601000 00000000 INTL
20051117)
ACPI: FACS 00000000bf77e000 00040
ACPI: APIC 00000000bf770390 000D2 (v02 042409 APIC1917 20090424 MSFT
00000097)
ACPI: MCFG 00000000bf770470 0003C (v01 042409 OEMMCFG 20090424 MSFT
00000097)
ACPI: SLIC 00000000bf7704b0 00176 (v01 NEC 20090424 MSFT
00000097)
ACPI: ERST 00000000bf770630 00040 (v01 042409 WHEA1917 20090424 MSFT
00000097)
ACPI: OEMB 00000000bf77e040 0007B (v01 042409 OEMB1917 20090424 MSFT
00000097)
ACPI: SRAT 00000000bf77a670 001D0 (v01 042409 OEMSRAT 00000001 INTL
00000001)
ACPI: HPET 00000000bf77a840 00038 (v01 042409 OEMHPET 20090424 MSFT
00000097)
ACPI: 00000000bf77e0c0 00118 (v01 AMI OEMDMAR 00000001 MSFT
00000097)
ACPI: SSDT 00000000bf781df0 00363 (v01 DpgPmm CpuPm 00000012 INTL
20051117)
ACPI: EINJ 00000000bf77a880 00130 (v01 AMIER AMI_EINJ 20090424 MSFT
00000097)
ACPI: BERT 00000000bf77aa10 00030 (v01 AMIER AMI_BERT 20090424 MSFT
00000097)
ACPI: ERST 00000000bf77aa40 001B0 (v01 AMIER AMI_ERST 20090424 MSFT
00000097)
ACPI: HEST 00000000bf77abf0 000A8 (v01 AMIER AMI_HEST 20090424 MSFT
00000097)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 6 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 0 -> APIC 5 -> Node 0
SRAT: PXM 0 -> APIC 7 -> Node 0
SRAT: PXM 1 -> APIC 16 -> Node 1
SRAT: PXM 1 -> APIC 18 -> Node 1
SRAT: PXM 1 -> APIC 20 -> Node 1
SRAT: PXM 1 -> APIC 22 -> Node 1
SRAT: PXM 1 -> APIC 17 -> Node 1
SRAT: PXM 1 -> APIC 19 -> Node 1
SRAT: PXM 1 -> APIC 21 -> Node 1
SRAT: PXM 1 -> APIC 23 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-c0000000
SRAT: Node 0 PXM 0 100000000-1c0000000
SRAT: Node 2 PXM 257 1c0000000-340000000
NUMA: Allocated memnodemap from 10000 - 16840
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-00000001c0000000
NODE_DATA [0000000000016840 - 000000000002e83f]
bootmap [000000000002f000 - 0000000000066fff] pages 38
(10 early reservations) ==> bootmem [0000000000 - 01c0000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
#1 [0010f42000 - 0010fcf000] XEN PAGETABLES ==> [0010f42000 -
0010fcf000]
#2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 -
0000008000]
#3 [0001000000 - 0002695878] TEXT DATA BSS ==> [0001000000 -
0002695878]
#4 [00026b6000 - 000f7d7600] RAMDISK ==> [00026b6000 -
000f7d7600]
#5 [000f7d8000 - 0010f42000] XEN START INFO ==> [000f7d8000 -
0010f42000]
#6 [0002696000 - 0002696149] BRK ==> [0002696000 -
0002696149]
#7 [0000100000 - 0000670000] PGTABLE ==> [0000100000 -
0000670000]
#8 [0010fcf000 - 0011f40000] PGTABLE ==> [0010fcf000 -
0011f40000]
#9 [0000010000 - 0000016840] MEMNODEMAP ==> [0000010000 -
0000016840]
Bootmem setup node 2 00000001c0000000-00000002ed0cf000
NODE_DATA [00000001c0000000 - 00000001c0017fff]
bootmap [00000001c0018000 - 00000001c003da1f] pages 26
(10 early reservations) ==> bootmem [01c0000000 - 02ed0cf000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0010f42000 - 0010fcf000] XEN PAGETABLES
#2 [0000006000 - 0000008000] TRAMPOLINE
#3 [0001000000 - 0002695878] TEXT DATA BSS
#4 [00026b6000 - 000f7d7600] RAMDISK
#5 [000f7d8000 - 0010f42000] XEN START INFO
#6 [0002696000 - 0002696149] BRK
#7 [0000100000 - 0000670000] PGTABLE
#8 [0010fcf000 - 0011f40000] PGTABLE
#9 [0000010000 - 0000016840] MEMNODEMAP
found SMP MP-table at [ffff8800000ff780] ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x002ed0cf
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009a
0: 0x00000100 -> 0x000bf760
0: 0x00100000 -> 0x001c0000
2: 0x001c0000 -> 0x002ed0cf
On node 0 totalpages: 1570538
DMA zone: 104 pages used for memmap
DMA zone: 1401 pages reserved
DMA zone: 2473 pages, LIFO batch:0
DMA32 zone: 26520 pages used for memmap
DMA32 zone: 753608 pages, LIFO batch:31
Normal zone: 19968 pages used for memmap
Normal zone: 766464 pages, LIFO batch:31
On node 2 totalpages: 1233103
Normal zone: 31310 pages used for memmap
Normal zone: 1201793 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ERROR: Unable to locate IOAPIC for GSI 2
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
ERROR: Unable to locate IOAPIC for GSI 20
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 16 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 256
PM: Registered nosave memory: 000000000009a000 - 0000000000100000
PM: Registered nosave memory: 00000000bf760000 - 00000000bf76e000
PM: Registered nosave memory: 00000000bf76e000 - 00000000bf770000
PM: Registered nosave memory: 00000000bf770000 - 00000000bf77e000
PM: Registered nosave memory: 00000000bf77e000 - 00000000bf7d0000
PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ec000
PM: Registered nosave memory: 00000000bf7ec000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
Booting paravirtualized kernel on Xen
Xen version: 4.0.1-rc1 (preserve-AD) (dom0)
NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:3
PERCPU: Embedded 478 pages/cpu @ffff880032052000 s1927128 r8192 d22568
u1957888
pcpu-alloc: s1927128 r8192 d22568 u1957888 alloc=478*4096
pcpu-alloc: [0] 00 [0] 02 [0] 04 [0] 06 [0] 08 [0] 10 [0] 12 [0] 14
pcpu-alloc: [1] 01 [1] 03 [1] 05 [1] 07 [1] 09 [1] 11 [1] 13 [1] 15
trying to map vcpu_info 0 at ffff88003205d020, mfn 15205d, offset 32
cpu 0 using vcpu_info at ffff88003205d020
trying to map vcpu_info 1 at ffff8801c7c58020, mfn 2e7c58, offset 32
cpu 1 using vcpu_info at ffff8801c7c58020
trying to map vcpu_info 2 at ffff88003223b020, mfn 15223b, offset 32
cpu 2 using vcpu_info at ffff88003223b020
trying to map vcpu_info 3 at ffff8801c7e36020, mfn 2e7e36, offset 32
cpu 3 using vcpu_info at ffff8801c7e36020
trying to map vcpu_info 4 at ffff880032419020, mfn 152419, offset 32
cpu 4 using vcpu_info at ffff880032419020
trying to map vcpu_info 5 at ffff8801c8014020, mfn 2e8014, offset 32
cpu 5 using vcpu_info at ffff8801c8014020
trying to map vcpu_info 6 at ffff8800325f7020, mfn 1525f7, offset 32
cpu 6 using vcpu_info at ffff8800325f7020
trying to map vcpu_info 7 at ffff8801c81f2020, mfn 2e81f2, offset 32
cpu 7 using vcpu_info at ffff8801c81f2020
trying to map vcpu_info 8 at ffff8800327d5020, mfn 1527d5, offset 32
cpu 8 using vcpu_info at ffff8800327d5020
trying to map vcpu_info 9 at ffff8801c83d0020, mfn 2e83d0, offset 32
cpu 9 using vcpu_info at ffff8801c83d0020
trying to map vcpu_info 10 at ffff8800329b3020, mfn 1529b3, offset 32
cpu 10 using vcpu_info at ffff8800329b3020
trying to map vcpu_info 11 at ffff8801c85ae020, mfn 2e85ae, offset 32
cpu 11 using vcpu_info at ffff8801c85ae020
trying to map vcpu_info 12 at ffff880032b91020, mfn 152b91, offset 32
cpu 12 using vcpu_info at ffff880032b91020
trying to map vcpu_info 13 at ffff8801c878c020, mfn 2e878c, offset 32
cpu 13 using vcpu_info at ffff8801c878c020
trying to map vcpu_info 14 at ffff880032d6f020, mfn 152d6f, offset 32
cpu 14 using vcpu_info at ffff880032d6f020
trying to map vcpu_info 15 at ffff8801c896a020, mfn 2e896a, offset 32
cpu 15 using vcpu_info at ffff8801c896a020
Xen: using vcpu_info placement
Built 2 zonelists in Zone order, mobility grouping on. Total pages:
2724338
Policy zone: Normal
Kernel command line: root=/dev/mapper/MISC-fedora ro nomodeset
console=hvc0 earlyprintk=xen debug initcall_debug loglvel=10
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
DMA: Placing 64MB software IO TLB between ffff880020000000 -
ffff880024000000
DMA: software IO TLB at phys 0x20000000 - 0x24000000
xen_swiotlb_fixup: buf=ffff880020000000 size=67108864
xen_swiotlb_fixup: buf=ffff880024060000 size=32768
Memory: 10546768k/12272444k available (4727k kernel code, 1057880k
absent, 667796k reserved, 3359k data, 3380k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=3
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:4352
xen: --> irq=0
xen: --> irq=1
xen: --> irq=2
xen: --> irq=3
xen: --> irq=4
xen: --> irq=5
xen: --> irq=6
xen: --> irq=7
xen: --> irq=8
xen: --> irq=9
xen: --> irq=10
xen: --> irq=11
xen: --> irq=12
xen: --> irq=13
xen: --> irq=14
xen: --> irq=15
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
xen: sci override: source_irq=9 global_irq=20 trigger=c polarity=3
xen: registering gsi 20 triggering 0 polarity 1
alloc irq_desc for 20 on node 0
alloc kstat_irqs on node 0
xen: --> irq=20
xen: acpi sci 20
Console: colour VGA+ 80x25
console [hvc0] enabled, bootconsole disabled
console [hvc0] enabled, bootconsole disabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 16384
... MAX_LOCKDEP_CHAINS: 32768
... CHAINHASH_SIZE: 16384
memory used by lock dependency info: 6367 kB
per task-struct memory footprint: 2688 bytes
allocated 112721920 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory
cgroups
ODEBUG: 24 of 24 active objects replaced
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
alloc irq_desc for 4351 on node 0
alloc kstat_irqs on node 0
Detected 2266.784 MHz processor.
Calibrating delay loop (skipped), value calculated using timer
frequency.. 4533.56 BogoMIPS (lpj=2266784)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 0/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
Performance Events: unsupported p6 CPU model 26 no PMU driver, software
events only.
lockdep: fixing up alternatives.
SMP alternatives: switching to UP code
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22950 entries in 91 pages
alloc irq_desc for 4350 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4349 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4348 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4347 on node 0
alloc kstat_irqs on node 0
calling migration_init+0x0/0x59 @ 1
initcall migration_init+0x0/0x59 returned 0 after 976 usecs
calling spawn_ksoftirqd+0x0/0x5a @ 1
initcall spawn_ksoftirqd+0x0/0x5a returned 0 after 976 usecs
calling init_call_single_data+0x0/0xad @ 1
initcall init_call_single_data+0x0/0xad returned 0 after 0 usecs
calling spawn_softlockup_task+0x0/0x75 @ 1
initcall spawn_softlockup_task+0x0/0x75 returned 0 after 976 usecs
calling relay_init+0x0/0x14 @ 1
initcall relay_init+0x0/0x14 returned 0 after 0 usecs
calling tracer_alloc_buffers+0x0/0x218 @ 1
initcall tracer_alloc_buffers+0x0/0x218 returned 0 after 976 usecs
calling init_trace_printk+0x0/0x12 @ 1
initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs
calling trace_workqueue_early_init+0x0/0x137 @ 1
initcall trace_workqueue_early_init+0x0/0x137 returned 0 after 976 usecs
calling mce_amd_init+0x0/0x33 @ 1
initcall mce_amd_init+0x0/0x33 returned 0 after 0 usecs
installing Xen timer for CPU 1
alloc irq_desc for 4346 on node 0
alloc kstat_irqs on node 0
lockdep: fixing up alternatives.
SMP alternatives: switching to SMP code
alloc irq_desc for 4345 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4344 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4343 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4342 on node 0
alloc kstat_irqs on node 0
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 1/0x0 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
installing Xen timer for CPU 2
alloc irq_desc for 4341 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4340 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4339 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4338 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4337 on node 0
alloc kstat_irqs on node 0
Initializing CPU#2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 2/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
installing Xen timer for CPU 3
alloc irq_desc for 4336 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4335 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4334 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4333 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4332 on node 0
alloc kstat_irqs on node 0
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 3/0x0 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
installing Xen timer for CPU 4
alloc irq_desc for 4331 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4330 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4329 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4328 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4327 on node 0
alloc kstat_irqs on node 0
Initializing CPU#4
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 4/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
installing Xen timer for CPU 5
alloc irq_desc for 4326 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4325 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4324 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4323 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4322 on node 0
alloc kstat_irqs on node 0
Initializing CPU#5
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 5/0x0 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
installing Xen timer for CPU 6
alloc irq_desc for 4321 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4320 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4319 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4318 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4317 on node 0
alloc kstat_irqs on node 0
Initializing CPU#6
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 6/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
installing Xen timer for CPU 7
alloc irq_desc for 4316 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4315 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4314 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4313 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4312 on node 0
alloc kstat_irqs on node 0
Initializing CPU#7
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 7/0x0 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
installing Xen timer for CPU 8
alloc irq_desc for 4311 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4310 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4309 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4308 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4307 on node 0
alloc kstat_irqs on node 0
Initializing CPU#8
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 8/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
installing Xen timer for CPU 9
alloc irq_desc for 4306 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4305 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4304 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4303 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4302 on node 0
alloc kstat_irqs on node 0
Initializing CPU#9
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 9/0x0 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
installing Xen timer for CPU 10
alloc irq_desc for 4301 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4300 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4299 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4298 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4297 on node 0
alloc kstat_irqs on node 0
Initializing CPU#10
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 10/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
installing Xen timer for CPU 11
alloc irq_desc for 4296 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4295 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4294 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4293 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4292 on node 0
alloc kstat_irqs on node 0
Initializing CPU#11
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 11/0x0 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
installing Xen timer for CPU 12
alloc irq_desc for 4291 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4290 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4289 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4288 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4287 on node 0
alloc kstat_irqs on node 0
Initializing CPU#12
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 12/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
installing Xen timer for CPU 13
alloc irq_desc for 4286 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4285 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4284 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4283 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4282 on node 0
alloc kstat_irqs on node 0
Initializing CPU#13
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 13/0x0 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
installing Xen timer for CPU 14
alloc irq_desc for 4281 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4280 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4279 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4278 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4277 on node 0
alloc kstat_irqs on node 0
Initializing CPU#14
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 14/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
installing Xen timer for CPU 15
alloc irq_desc for 4276 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4275 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4274 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4273 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4272 on node 0
alloc kstat_irqs on node 0
Initializing CPU#15
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 15/0x0 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
Brought up 16 CPUs
CPU0 attaching sched-domain:
domain 0: span 0,8 level SIBLING
groups: 0 (cpu_power = 589) 8 (cpu_power = 589)
domain 1: span 0,8 level MC
groups: 0,8 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10
(cpu_power = 1178) 3,11 (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13
(cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU1 attaching sched-domain:
domain 0: span 1,9 level SIBLING
groups: 1 (cpu_power = 589) 9 (cpu_power = 589)
domain 1: span 1,9 level MC
groups: 1,9 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11
(cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14
(cpu_power = 1178) 7,15 (cpu_power = 1178) 0,8 (cpu_power = 1178)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU2 attaching sched-domain:
domain 0: span 2,10 level SIBLING
groups: 2 (cpu_power = 589) 10 (cpu_power = 589)
domain 1: span 2,10 level MC
groups: 2,10 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) 4,12
(cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15
(cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU3 attaching sched-domain:
domain 0: span 3,11 level SIBLING
groups: 3 (cpu_power = 589) 11 (cpu_power = 589)
domain 1: span 3,11 level MC
groups: 3,11 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 3,11 (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13
(cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) 0,8
(cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU4 attaching sched-domain:
domain 0: span 4,12 level SIBLING
groups: 4 (cpu_power = 589) 12 (cpu_power = 589)
domain 1: span 4,12 level MC
groups: 4,12 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14
(cpu_power = 1178) 7,15 (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9
(cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU5 attaching sched-domain:
domain 0: span 5,13 level SIBLING
groups: 5 (cpu_power = 589) 13 (cpu_power = 589)
domain 1: span 5,13 level MC
groups: 5,13 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15
(cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10
(cpu_power = 1178) 3,11 (cpu_power = 1178) 4,12 (cpu_power = 1178)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU6 attaching sched-domain:
domain 0: span 6,14 level SIBLING
groups: 6 (cpu_power = 589) 14 (cpu_power = 589)
domain 1: span 6,14 level MC
groups: 6,14 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) 0,8
(cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11
(cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU7 attaching sched-domain:
domain 0: span 7,15 level SIBLING
groups: 7 (cpu_power = 589) 15 (cpu_power = 589)
domain 1: span 7,15 level MC
groups: 7,15 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 7,15 (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9
(cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) 4,12
(cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU8 attaching sched-domain:
domain 0: span 0,8 level SIBLING
groups: 8 (cpu_power = 589) 0 (cpu_power = 589)
domain 1: span 0,8 level MC
groups: 0,8 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10
(cpu_power = 1178) 3,11 (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13
(cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU9 attaching sched-domain:
domain 0: span 1,9 level SIBLING
groups: 9 (cpu_power = 589) 1 (cpu_power = 589)
domain 1: span 1,9 level MC
groups: 1,9 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11
(cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14
(cpu_power = 1178) 7,15 (cpu_power = 1178) 0,8 (cpu_power = 1178)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU10 attaching sched-domain:
domain 0: span 2,10 level SIBLING
groups: 10 (cpu_power = 589) 2 (cpu_power = 589)
domain 1: span 2,10 level MC
groups: 2,10 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) 4,12
(cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15
(cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU11 attaching sched-domain:
domain 0: span 3,11 level SIBLING
groups: 11 (cpu_power = 589) 3 (cpu_power = 589)
domain 1: span 3,11 level MC
groups: 3,11 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 3,11 (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13
(cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) 0,8
(cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU12 attaching sched-domain:
domain 0: span 4,12 level SIBLING
groups: 12 (cpu_power = 589) 4 (cpu_power = 589)
domain 1: span 4,12 level MC
groups: 4,12 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14
(cpu_power = 1178) 7,15 (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9
(cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU13 attaching sched-domain:
domain 0: span 5,13 level SIBLING
groups: 13 (cpu_power = 589) 5 (cpu_power = 589)
domain 1: span 5,13 level MC
groups: 5,13 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15
(cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10
(cpu_power = 1178) 3,11 (cpu_power = 1178) 4,12 (cpu_power = 1178)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU14 attaching sched-domain:
domain 0: span 6,14 level SIBLING
groups: 14 (cpu_power = 589) 6 (cpu_power = 589)
domain 1: span 6,14 level MC
groups: 6,14 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) 0,8
(cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11
(cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU15 attaching sched-domain:
domain 0: span 7,15 level SIBLING
groups: 15 (cpu_power = 589) 7 (cpu_power = 589)
domain 1: span 7,15 level MC
groups: 7,15 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 7,15 (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9
(cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) 4,12
(cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
calling init_mmap_min_addr+0x0/0x26 @ 1
initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs
calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after
0 usecs
calling net_ns_init+0x0/0xf8 @ 1
initcall net_ns_init+0x0/0xf8 returned 0 after 976 usecs
calling e820_mark_nvs_memory+0x0/0x40 @ 1
initcall e820_mark_nvs_memory+0x0/0x40 returned 0 after 976 usecs
calling cpufreq_tsc+0x0/0x28 @ 1
initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs
calling pci_reboot_init+0x0/0x14 @ 1
initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs
calling init_lapic_sysfs+0x0/0x2d @ 1
initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 usecs
calling alloc_frozen_cpus+0x0/0xd @ 1
initcall alloc_frozen_cpus+0x0/0xd returned 0 after 0 usecs
calling sysctl_init+0x0/0x32 @ 1
initcall sysctl_init+0x0/0x32 returned 0 after 976 usecs
calling ksysfs_init+0x0/0xbb @ 1
initcall ksysfs_init+0x0/0xbb returned 0 after 0 usecs
calling async_init+0x0/0x60 @ 1
initcall async_init+0x0/0x60 returned 0 after 976 usecs
calling init_jiffies_clocksource+0x0/0x12 @ 1
initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs
calling pm_init+0x0/0x34 @ 1
initcall pm_init+0x0/0x34 returned 0 after 0 usecs
calling pm_disk_init+0x0/0x19 @ 1
initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs
calling swsusp_header_init+0x0/0x31 @ 1
initcall swsusp_header_init+0x0/0x31 returned 0 after 0 usecs
calling init_zero_pfn+0x0/0x35 @ 1
initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs
calling filelock_init+0x0/0x2e @ 1
initcall filelock_init+0x0/0x2e returned 0 after 976 usecs
calling init_misc_binfmt+0x0/0x42 @ 1
initcall init_misc_binfmt+0x0/0x42 returned 0 after 0 usecs
calling init_script_binfmt+0x0/0x14 @ 1
initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs
calling init_elf_binfmt+0x0/0x14 @ 1
initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
calling init_compat_elf_binfmt+0x0/0x14 @ 1
initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
calling debugfs_init+0x0/0x5a @ 1
initcall debugfs_init+0x0/0x5a returned 0 after 0 usecs
calling securityfs_init+0x0/0x51 @ 1
initcall securityfs_init+0x0/0x51 returned 0 after 0 usecs
calling random32_init+0x0/0xd7 @ 1
initcall random32_init+0x0/0xd7 returned 0 after 0 usecs
calling __gnttab_init+0x0/0x26 @ 1
Grant table initialized
initcall __gnttab_init+0x0/0x26 returned 0 after 976 usecs
calling regulator_init+0x0/0x2e @ 1
regulator: core version 0.5
initcall regulator_init+0x0/0x2e returned 0 after 0 usecs
calling early_resume_init+0x0/0x19d @ 1
Time: 11:17:44 Date: 05/30/10
initcall early_resume_init+0x0/0x19d returned 0 after 0 usecs
calling cpufreq_core_init+0x0/0xa2 @ 1
initcall cpufreq_core_init+0x0/0xa2 returned 0 after 0 usecs
calling cpuidle_init+0x0/0x40 @ 1
initcall cpuidle_init+0x0/0x40 returned 0 after 976 usecs
calling sock_init+0x0/0x5e @ 1
initcall sock_init+0x0/0x5e returned 0 after 976 usecs
calling net_inuse_init+0x0/0x26 @ 1
initcall net_inuse_init+0x0/0x26 returned 0 after 0 usecs
calling netpoll_init+0x0/0x41 @ 1
initcall netpoll_init+0x0/0x41 returned 0 after 0 usecs
calling netlink_proto_init+0x0/0x142 @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x142 returned 0 after 976 usecs
calling bdi_class_init+0x0/0x41 @ 1
initcall bdi_class_init+0x0/0x41 returned 0 after 976 usecs
calling kobject_uevent_init+0x0/0x54 @ 1
initcall kobject_uevent_init+0x0/0x54 returned 0 after 976 usecs
calling pcibus_class_init+0x0/0x19 @ 1
initcall pcibus_class_init+0x0/0x19 returned 0 after 976 usecs
calling pci_driver_init+0x0/0x12 @ 1
initcall pci_driver_init+0x0/0x12 returned 0 after 976 usecs
calling backlight_class_init+0x0/0x5d @ 1
initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs
calling __xenbus_probe_init+0x0/0x21 @ 1
alloc irq_desc for 4271 on node 0
alloc kstat_irqs on node 0
initcall __xenbus_probe_init+0x0/0x21 returned 0 after 1952 usecs
calling tty_class_init+0x0/0x38 @ 1
initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs
calling vtconsole_class_init+0x0/0xc3 @ 1
initcall vtconsole_class_init+0x0/0xc3 returned 0 after 976 usecs
calling register_node_type+0x0/0x7e @ 1
initcall register_node_type+0x0/0x7e returned 0 after 976 usecs
calling amd_postcore_init+0x0/0x78 @ 1
initcall amd_postcore_init+0x0/0x78 returned 0 after 0 usecs
calling arch_kdebugfs_init+0x0/0x272 @ 1
initcall arch_kdebugfs_init+0x0/0x272 returned 0 after 0 usecs
calling mtrr_if_init+0x0/0x63 @ 1
initcall mtrr_if_init+0x0/0x63 returned 0 after 0 usecs
calling ffh_cstate_init+0x0/0x2a @ 1
initcall ffh_cstate_init+0x0/0x2a returned 0 after 0 usecs
calling arch_init_ftrace_syscalls+0x0/0x11e @ 1
initcall arch_init_ftrace_syscalls+0x0/0x11e returned 0 after 976 usecs
calling acpi_pci_init+0x0/0x5c @ 1
ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x5c returned 0 after 0 usecs
calling register_xen_pci_notifier+0x0/0x24 @ 1
initcall register_xen_pci_notifier+0x0/0x24 returned 0 after 0 usecs
calling setup_vcpu_hotplug_event+0x0/0x22 @ 1
initcall setup_vcpu_hotplug_event+0x0/0x22 returned 0 after 0 usecs
calling dmi_id_init+0x0/0x34c @ 1
initcall dmi_id_init+0x0/0x34c returned 0 after 976 usecs
calling dma_bus_init+0x0/0x3f @ 1
initcall dma_bus_init+0x0/0x3f returned 0 after 0 usecs
calling dma_channel_table_init+0x0/0x10e @ 1
initcall dma_channel_table_init+0x0/0x10e returned 0 after 0 usecs
calling pci_arch_init+0x0/0x60 @ 1
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
initcall pci_arch_init+0x0/0x60 returned 0 after 0 usecs
calling topology_init+0x0/0x97 @ 1
initcall topology_init+0x0/0x97 returned 0 after 976 usecs
calling mtrr_init_finialize+0x0/0x3d @ 1
initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs
calling param_sysfs_init+0x0/0x23a @ 1
initcall param_sysfs_init+0x0/0x23a returned 0 after 7811 usecs
calling pm_sysrq_init+0x0/0x1e @ 1
initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 usecs
calling audit_watch_init+0x0/0x2f @ 1
initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs
calling init_slow_work+0x0/0x37 @ 1
initcall init_slow_work+0x0/0x37 returned 0 after 0 usecs
calling default_bdi_init+0x0/0xc6 @ 1
initcall default_bdi_init+0x0/0xc6 returned 0 after 976 usecs
calling init_bio+0x0/0xce @ 1
bio: create slab <bio-0> at 0
initcall init_bio+0x0/0xce returned 0 after 3905 usecs
calling fsnotify_init+0x0/0x12 @ 1
initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs
calling fsnotify_notification_init+0x0/0x100 @ 1
initcall fsnotify_notification_init+0x0/0x100 returned 0 after 976 usecs
calling cryptomgr_init+0x0/0x12 @ 1
initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
calling blk_settings_init+0x0/0x2a @ 1
initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
calling blk_ioc_init+0x0/0x2a @ 1
initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
calling blk_softirq_init+0x0/0x70 @ 1
initcall blk_softirq_init+0x0/0x70 returned 0 after 0 usecs
calling blk_iopoll_setup+0x0/0x70 @ 1
initcall blk_iopoll_setup+0x0/0x70 returned 0 after 0 usecs
calling genhd_device_init+0x0/0x7b @ 1
initcall genhd_device_init+0x0/0x7b returned 0 after 2929 usecs
calling blk_dev_integrity_init+0x0/0x2a @ 1
initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 usecs
calling pci_slot_init+0x0/0x4c @ 1
initcall pci_slot_init+0x0/0x4c returned 0 after 0 usecs
calling fbmem_init+0x0/0x98 @ 1
initcall fbmem_init+0x0/0x98 returned 0 after 0 usecs
calling acpi_init+0x0/0x2d1 @ 1
ERROR: Unable to locate IOAPIC for GSI 20
ACPI: EC: Look up EC in DSDT
ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer,
expected Buffer (20090903/nspredef-1006)
\_SB_:_OSC evaluation returned wrong type
_OSC request data:1 6
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI Warning: Incorrect checksum in table [OEMB] - 54, should be 51
(20090903/tbutils-314)
ACPI Warning: Incorrect checksum in table [ ] - 50, should be 94
(20090903/tbutils-314)
initcall acpi_init+0x0/0x2d1 returned 0 after 158183 usecs
calling dock_init+0x0/0x8d @ 1
ACPI: No dock devices found.
initcall dock_init+0x0/0x8d returned 0 after 0 usecs
calling acpi_pci_root_init+0x0/0x28 @ 1
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:16.0: reg 10 64bit mmio: [0xfbbfc000-0xfbbfffff]
pci 0000:00:16.1: reg 10 64bit mmio: [0xfbbf8000-0xfbbfbfff]
pci 0000:00:16.2: reg 10 64bit mmio: [0xfbbf4000-0xfbbf7fff]
pci 0000:00:16.3: reg 10 64bit mmio: [0xfbbf0000-0xfbbf3fff]
pci 0000:00:16.4: reg 10 64bit mmio: [0xfbbec000-0xfbbeffff]
pci 0000:00:16.5: reg 10 64bit mmio: [0xfbbe8000-0xfbbebfff]
pci 0000:00:16.6: reg 10 64bit mmio: [0xfbbe4000-0xfbbe7fff]
pci 0000:00:16.7: reg 10 64bit mmio: [0xfbbe0000-0xfbbe3fff]
pci 0000:00:1a.0: reg 20 io port: [0xac00-0xac1f]
pci 0000:00:1a.1: reg 20 io port: [0xa880-0xa89f]
pci 0000:00:1a.2: reg 20 io port: [0xa800-0xa81f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfbbde000-0xfbbde3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbbd8000-0xfbbdbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xa480-0xa49f]
pci 0000:00:1d.1: reg 20 io port: [0xa400-0xa41f]
pci 0000:00:1d.2: reg 20 io port: [0xa080-0xa09f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbbdc000-0xfbbdc3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 0097)
pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007]
pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03]
pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887]
pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803]
pci 0000:00:1f.2: reg 20 io port: [0x9480-0x949f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfbbd6000-0xfbbd67ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbbd4000-0xfbbd40ff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xf4000000-0xf5ffffff]
pci 0000:01:00.0: reg 24 io port: [0xbc00-0xbc7f]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xf3fe0000-0xf3ffffff]
pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf3f00000-0xf6ffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:03:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
pci 0000:03:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:03:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:03:00.0: reg 24 io port: [0xcc00-0xcc7f]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0xf7fe0000-0xf7ffffff]
pci 0000:00:07.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:07.0: bridge 32bit mmio: [0xf7f00000-0xfaffffff]
pci 0000:00:07.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.2: PME# supported from D0 D3hot D3cold
pci 0000:04:00.2: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable
it with 'pcie_aspm=force'
pci 0000:00:1c.0: bridge 32bit mmio: [0xfbc00000-0xfbcfffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf2f00000-0xf2ffffff]
pci 0000:05:0e.0: reg 10 32bit mmio pref: [0xf2ff0000-0xf2ffffff]
pci 0000:05:0e.0: reg 18 32bit mmio: [0xfbce0000-0xfbcfffff]
pci 0000:05:0e.0: reg 30 32bit mmio pref: [0xfbcd0000-0xfbcd7fff]
pci 0000:05:0e.0: supports D1
pci 0000:04:00.0: bridge 32bit mmio: [0xfbc00000-0xfbcfffff]
pci 0000:04:00.0: bridge 64bit mmio pref: [0xf2f00000-0xf2ffffff]
pci 0000:07:00.0: reg 10 32bit mmio: [0xfbde0000-0xfbdfffff]
pci 0000:07:00.0: reg 18 io port: [0xdc00-0xdc1f]
pci 0000:07:00.0: reg 1c 32bit mmio: [0xfbddc000-0xfbddffff]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfbd00000-0xfbdfffff]
pci 0000:08:00.0: reg 10 32bit mmio: [0xfbee0000-0xfbefffff]
pci 0000:08:00.0: reg 18 io port: [0xec00-0xec1f]
pci 0000:08:00.0: reg 1c 32bit mmio: [0xfbedc000-0xfbedffff]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:03.0
(XEN) PCI add device 00:07.0
(XEN) PCI add device 00:14.0
(XEN) PCI add device 00:14.1
(XEN) PCI add device 00:14.2
(XEN) PCI add device 00:14.3
(XEN) PCI add device 00:16.0
(XEN) PCI add device 00:16.1
(XEN) PCI add device 00:16.2
(XEN) PCI add device 00:16.3
(XEN) PCI add device 00:16.4
(XEN) PCI add device 00:16.5
(XEN) PCI add device 00:16.6
(XEN) PCI add device 00:16.7
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1a.1
(XEN) PCI add device 00:1a.2
(XEN) PCI add device 00:1a.7
(XEN) PCI add device 00:1b.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.4
(XEN) PCI add device 00:1c.5
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) PCI add device 00:1d.2
(XEN) PCI add device 00:1d.7
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 01:00.0
(XEN) PCI add device 03:00.0
(XEN) PCI add device 04:00.0
(XEN) PCI add device 04:00.2
(XEN) PCI add device 05:0e.0
(XEN) PCI add device 07:00.0
(XEN) PCI add device 08:00.0
initcall acpi_pci_root_init+0x0/0x28 returned 0 after 89843 usecs
calling acpi_pci_link_init+0x0/0x43 @ 1
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
initcall acpi_pci_link_init+0x0/0x43 returned 0 after 4882 usecs
calling pnp_init+0x0/0x12 @ 1
initcall pnp_init+0x0/0x12 returned 0 after 0 usecs
calling __setup_shutdown_event+0x0/0x2a @ 1
initcall __setup_shutdown_event+0x0/0x2a returned 0 after 0 usecs
calling xen_pcpu_init+0x0/0xa7 @ 1
sync cpu 0 get result 1 max_id f
sync cpu 1 get result 1 max_id f
sync cpu 2 get result 1 max_id f
sync cpu 3 get result 1 max_id f
sync cpu 4 get result 1 max_id f
sync cpu 5 get result 1 max_id f
sync cpu 6 get result 1 max_id f
sync cpu 7 get result 1 max_id f
sync cpu 8 get result 1 max_id f
sync cpu 9 get result 1 max_id f
sync cpu a get result 1 max_id f
sync cpu b get result 1 max_id f
sync cpu c get result 1 max_id f
sync cpu d get result 1 max_id f
sync cpu e get result 1 max_id f
sync cpu f get result 1 max_id f
alloc irq_desc for 4270 on node 0
alloc kstat_irqs on node 0
initcall xen_pcpu_init+0x0/0xa7 returned 4270 after 16601 usecs
initcall xen_pcpu_init+0x0/0xa7 returned with error code 4270
calling xenbus_probe_backend_init+0x0/0x64 @ 1
initcall xenbus_probe_backend_init+0x0/0x64 returned 0 after 976 usecs
calling xenbus_probe_frontend_init+0x0/0x64 @ 1
initcall xenbus_probe_frontend_init+0x0/0x64 returned 0 after 0 usecs
calling balloon_init+0x0/0x208 @ 1
xen_balloon: Initialising balloon driver with page order 0.
initcall balloon_init+0x0/0x208 returned 0 after 0 usecs
calling xen_acpi_processor_extcntl_init+0x0/0x4f @ 1
initcall xen_acpi_processor_extcntl_init+0x0/0x4f returned 0 after 0
usecs
calling misc_init+0x0/0xb7 @ 1
initcall misc_init+0x0/0xb7 returned 0 after 0 usecs
calling vga_arb_device_init+0x0/0x78 @ 1
vgaarb: device added: PCI:0000:01:00.0,decodes=io
+mem,owns=none,locks=none
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io
+mem,locks=none
vgaarb: loaded
initcall vga_arb_device_init+0x0/0x78 returned 0 after 976 usecs
calling cn_init+0x0/0xa3 @ 1
initcall cn_init+0x0/0xa3 returned 0 after 976 usecs
calling init_scsi+0x0/0x91 @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0x91 returned 0 after 976 usecs
calling ata_init+0x0/0x390 @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x390 returned 0 after 1953 usecs
calling phy_init+0x0/0x31 @ 1
initcall phy_init+0x0/0x31 returned 0 after 976 usecs
calling init_pcmcia_cs+0x0/0x36 @ 1
initcall init_pcmcia_cs+0x0/0x36 returned 0 after 0 usecs
calling usb_init+0x0/0x1b2 @ 1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x1b2 returned 0 after 1953 usecs
calling serio_init+0x0/0x89 @ 1
initcall serio_init+0x0/0x89 returned 0 after 976 usecs
calling input_init+0x0/0x13d @ 1
initcall input_init+0x0/0x13d returned 0 after 0 usecs
calling rtc_init+0x0/0x71 @ 1
initcall rtc_init+0x0/0x71 returned 0 after 976 usecs
calling power_supply_class_init+0x0/0x38 @ 1
initcall power_supply_class_init+0x0/0x38 returned 0 after 0 usecs
calling thermal_init+0x0/0x58 @ 1
initcall thermal_init+0x0/0x58 returned 0 after 0 usecs
calling md_init+0x0/0xd0 @ 1
initcall md_init+0x0/0xd0 returned 0 after 0 usecs
calling leds_init+0x0/0x40 @ 1
initcall leds_init+0x0/0x40 returned 0 after 0 usecs
calling pci_subsys_init+0x0/0x11a @ 1
PCI: Using ACPI for IRQ routing
initcall pci_subsys_init+0x0/0x11a returned 0 after 0 usecs
calling proto_init+0x0/0x12 @ 1
initcall proto_init+0x0/0x12 returned 0 after 0 usecs
calling net_dev_init+0x0/0x1a1 @ 1
initcall net_dev_init+0x0/0x1a1 returned 0 after 976 usecs
calling neigh_init+0x0/0x71 @ 1
initcall neigh_init+0x0/0x71 returned 0 after 0 usecs
calling fib_rules_init+0x0/0xa6 @ 1
initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs
calling pktsched_init+0x0/0xd0 @ 1
initcall pktsched_init+0x0/0xd0 returned 0 after 0 usecs
calling tc_filter_init+0x0/0x4c @ 1
initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs
calling tc_action_init+0x0/0x4c @ 1
initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs
calling genl_init+0x0/0x8f @ 1
initcall genl_init+0x0/0x8f returned 0 after 976 usecs
calling cipso_v4_init+0x0/0x88 @ 1
initcall cipso_v4_init+0x0/0x88 returned 0 after 0 usecs
calling wireless_nlevent_init+0x0/0x12 @ 1
initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs
calling netlbl_init+0x0/0x81 @ 1
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x81 returned 0 after 0 usecs
calling sysctl_init+0x0/0x49 @ 1
initcall sysctl_init+0x0/0x49 returned 0 after 0 usecs
calling xen_mc_debugfs+0x0/0x118 @ 1
initcall xen_mc_debugfs+0x0/0x118 returned 0 after 976 usecs
calling xen_mmu_debugfs+0x0/0x2be @ 1
initcall xen_mmu_debugfs+0x0/0x2be returned 0 after 976 usecs
calling print_all_ICs+0x0/0x567 @ 1
initcall print_all_ICs+0x0/0x567 returned 0 after 976 usecs
calling hpet_late_init+0x0/0x1d1 @ 1
initcall hpet_late_init+0x0/0x1d1 returned -19 after 0 usecs
calling init_k8_nbs+0x0/0x28 @ 1
initcall init_k8_nbs+0x0/0x28 returned 0 after 0 usecs
calling clocksource_done_booting+0x0/0x5e @ 1
Switching to clocksource xen
kstop/0 used greatest stack depth: 6296 bytes left
initcall clocksource_done_booting+0x0/0x5e returned 0 after 8895 usecs
calling ftrace_init_debugfs+0x0/0x241 @ 1
initcall ftrace_init_debugfs+0x0/0x241 returned 0 after 653 usecs
calling rb_init_debugfs+0x0/0x2f @ 1
initcall rb_init_debugfs+0x0/0x2f returned 0 after 18 usecs
calling tracer_init_debugfs+0x0/0x347 @ 1
initcall tracer_init_debugfs+0x0/0x347 returned 0 after 2609 usecs
calling init_trace_printk_function_export+0x0/0x2f @ 1
initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 18
usecs
calling stat_workqueue_init+0x0/0x2d @ 1
initcall stat_workqueue_init+0x0/0x2d returned 0 after 21 usecs
calling event_trace_init+0x0/0x1ed @ 1
initcall event_trace_init+0x0/0x1ed returned 0 after 87492 usecs
calling init_pipe_fs+0x0/0x4d @ 1
initcall init_pipe_fs+0x0/0x4d returned 0 after 212 usecs
calling eventpoll_init+0x0/0xda @ 1
initcall eventpoll_init+0x0/0xda returned 0 after 121 usecs
calling anon_inode_init+0x0/0x128 @ 1
initcall anon_inode_init+0x0/0x128 returned 0 after 142 usecs
calling blk_scsi_ioctl_init+0x0/0x297 @ 1
initcall blk_scsi_ioctl_init+0x0/0x297 returned 0 after 0 usecs
calling acpi_event_init+0x0/0x80 @ 1
initcall acpi_event_init+0x0/0x80 returned 0 after 155 usecs
calling pnpacpi_init+0x0/0x8c @ 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
xen: registering gsi 8 triggering 1 polarity 0
xen_allocate_pirq: returning irq 8 for gsi 8
xen: --> irq=8
xen: registering gsi 13 triggering 1 polarity 0
xen_allocate_pirq: returning irq 13 for gsi 13
xen: --> irq=13
xen: registering gsi 4 triggering 1 polarity 0
xen_allocate_pirq: returning irq 4 for gsi 4
xen: --> irq=4
Already setup the GSI :4
xen: registering gsi 3 triggering 1 polarity 0
xen_allocate_pirq: returning irq 3 for gsi 3
xen: --> irq=3
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
initcall pnpacpi_init+0x0/0x8c returned 0 after 72877 usecs
calling pnp_system_init+0x0/0x12 @ 1
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:06: ioport range 0xa00-0xa0f has been reserved
system 00:06: ioport range 0x290-0x29f has been reserved
system 00:07: ioport range 0xca2-0xca3 has been reserved
system 00:07: ioport range 0xcf8-0xcff could not be reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x500-0x57f could not be reserved
system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved
system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0xfed90000-0xffffffff could not be reserved
initcall pnp_system_init+0x0/0x12 returned 0 after 93585 usecs
calling pcistub_init+0x0/0x1e7 @ 1
initcall pcistub_init+0x0/0x1e7 returned 0 after 1622 usecs
calling chr_dev_init+0x0/0xc7 @ 1
initcall chr_dev_init+0x0/0xc7 returned 0 after 922 usecs
calling firmware_class_init+0x0/0x79 @ 1
initcall firmware_class_init+0x0/0x79 returned 0 after 96 usecs
calling init_pcmcia_bus+0x0/0x84 @ 1
initcall init_pcmcia_bus+0x0/0x84 returned 0 after 124 usecs
calling cpufreq_gov_performance_init+0x0/0x12 @ 1
initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 16 usecs
calling cpufreq_gov_userspace_init+0x0/0x12 @ 1
initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 2 usecs
calling init_acpi_pm_clocksource+0x0/0xef @ 1
PM-Timer failed consistency check (0x0xffffff) - aborting.
initcall init_acpi_pm_clocksource+0x0/0xef returned -19 after 9691 usecs
calling pcibios_assign_resources+0x0/0x74 @ 1
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xb000-0xbfff
pci 0000:00:01.0: MEM window: 0xf3f00000-0xf6ffffff
pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0: IO window: disabled
pci 0000:00:03.0: MEM window: disabled
pci 0000:00:03.0: PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
pci 0000:00:07.0: IO window: 0xc000-0xcfff
pci 0000:00:07.0: MEM window: 0xf7f00000-0xfaffffff
pci 0000:00:07.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
pci 0000:04:00.0: IO window: disabled
pci 0000:04:00.0: MEM window: 0xfbc00000-0xfbcfffff
pci 0000:04:00.0: PREFETCH window: 0x000000f2f00000-0x000000f2ffffff
pci 0000:04:00.2: PCI bridge, secondary bus 0000:06
pci 0000:04:00.2: IO window: disabled
pci 0000:04:00.2: MEM window: disabled
pci 0000:04:00.2: PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0: IO window: 0x1000-0x1fff
pci 0000:00:1c.0: MEM window: 0xfbc00000-0xfbcfffff
pci 0000:00:1c.0: PREFETCH window: 0x000000f2f00000-0x000000f2ffffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07
pci 0000:00:1c.4: IO window: 0xd000-0xdfff
pci 0000:00:1c.4: MEM window: 0xfbd00000-0xfbdfffff
pci 0000:00:1c.4: PREFETCH window: 0x000000f0000000-0x000000f01fffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.5: IO window: 0xe000-0xefff
pci 0000:00:1c.5: MEM window: 0xfbe00000-0xfbefffff
pci 0000:00:1c.5: PREFETCH window: 0x000000f0200000-0x000000f03fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
xen: registering gsi 17 triggering 0 polarity 1
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
xen: --> irq=17
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:04:00.0: setting latency timer to 64
pci 0000:04:00.2: setting latency timer to 64
xen: registering gsi 17 triggering 0 polarity 1
xen_allocate_pirq: returning irq 17 for gsi 17
xen: --> irq=17
Already setup the GSI :17
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
xen: registering gsi 16 triggering 0 polarity 1
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
xen: --> irq=16
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:01: resource 1 mem: [0xf3f00000-0xf6ffffff]
pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:03: resource 1 mem: [0xf7f00000-0xfaffffff]
pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:04: resource 1 mem: [0xfbc00000-0xfbcfffff]
pci_bus 0000:04: resource 2 pref mem [0xf2f00000-0xf2ffffff]
pci_bus 0000:05: resource 1 mem: [0xfbc00000-0xfbcfffff]
pci_bus 0000:05: resource 2 pref mem [0xf2f00000-0xf2ffffff]
pci_bus 0000:07: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:07: resource 1 mem: [0xfbd00000-0xfbdfffff]
pci_bus 0000:07: resource 2 pref mem [0xf0000000-0xf01fffff]
pci_bus 0000:08: resource 0 io: [0xe000-0xefff]
pci_bus 0000:08: resource 1 mem: [0xfbe00000-0xfbefffff]
pci_bus 0000:08: resource 2 pref mem [0xf0200000-0xf03fffff]
pci_bus 0000:09: resource 3 io: [0x00-0xffff]
pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff]
initcall pcibios_assign_resources+0x0/0x74 returned 0 after 361318 usecs
calling sysctl_core_init+0x0/0x38 @ 1
initcall sysctl_core_init+0x0/0x38 returned 0 after 105 usecs
calling inet_init+0x0/0x209 @ 1
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 10, 4718592 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
initcall inet_init+0x0/0x209 returned 0 after 40865 usecs
calling af_unix_init+0x0/0x55 @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x55 returned 0 after 3095 usecs
calling pci_apply_final_quirks+0x0/0x36 @ 1
pci 0000:03:00.0: Boot video device
pci 0000:04:00.0: rerouting interrupts for [8086:0370]
pci 0000:04:00.2: rerouting interrupts for [8086:0372]
initcall pci_apply_final_quirks+0x0/0x36 returned 0 after 13680 usecs
calling populate_rootfs+0x0/0x263 @ 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 214149k freed
initcall populate_rootfs+0x0/0x263 returned 0 after 592711 usecs
calling pci_iommu_init+0x0/0x50 @ 1
DMA-API: preallocated 32768 debug entries
DMA-API: debugging enabled by kernel config
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
DMA: Placing 64MB software IO TLB between ffff880020000000 -
ffff880024000000
DMA: software IO TLB at phys 0x20000000 - 0x24000000
initcall pci_iommu_init+0x0/0x50 returned 0 after 61360 usecs
calling calgary_fixup_tce_spaces+0x0/0xf9 @ 1
initcall calgary_fixup_tce_spaces+0x0/0xf9 returned -19 after 0 usecs
calling i8259A_init_sysfs+0x0/0x22 @ 1
initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 109 usecs
calling vsyscall_init+0x0/0x6c @ 1
initcall vsyscall_init+0x0/0x6c returned 0 after 117 usecs
calling sbf_init+0x0/0xef @ 1
initcall sbf_init+0x0/0xef returned 0 after 0 usecs
calling i8237A_init_sysfs+0x0/0x22 @ 1
initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 80 usecs
calling add_rtc_cmos+0x0/0xc4 @ 1
initcall add_rtc_cmos+0x0/0xc4 returned 0 after 3 usecs
calling cache_sysfs_init+0x0/0x67 @ 1
initcall cache_sysfs_init+0x0/0x67 returned 0 after 6102 usecs
calling mce_init_device+0x0/0x109 @ 1
initcall mce_init_device+0x0/0x109 returned 0 after 2029 usecs
calling threshold_init_device+0x0/0x98 @ 1
initcall threshold_init_device+0x0/0x98 returned 0 after 1 usecs
calling thermal_throttle_init_device+0x0/0x93 @ 1
initcall thermal_throttle_init_device+0x0/0x93 returned 0 after 0 usecs
calling msr_init+0x0/0x14c @ 1
initcall msr_init+0x0/0x14c returned 0 after 1693 usecs
calling cpuid_init+0x0/0x14c @ 1
initcall cpuid_init+0x0/0x14c returned 0 after 1636 usecs
calling ioapic_init_sysfs+0x0/0xa7 @ 1
initcall ioapic_init_sysfs+0x0/0xa7 returned 0 after 114 usecs
calling add_pcspkr+0x0/0x28 @ 1
initcall add_pcspkr+0x0/0x28 returned 0 after 77 usecs
calling audit_classes_init+0x0/0xaf @ 1
initcall audit_classes_init+0x0/0xaf returned 0 after 13 usecs
calling pt_dump_init+0x0/0x30 @ 1
initcall pt_dump_init+0x0/0x30 returned 0 after 66 usecs
calling init_vdso_vars+0x0/0x220 @ 1
initcall init_vdso_vars+0x0/0x220 returned 0 after 46 usecs
calling ia32_binfmt_init+0x0/0x14 @ 1
initcall ia32_binfmt_init+0x0/0x14 returned 0 after 32 usecs
calling sysenter_setup+0x0/0x2df @ 1
initcall sysenter_setup+0x0/0x2df returned 0 after 3 usecs
calling init_sched_debug_procfs+0x0/0x2c @ 1
initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 15 usecs
calling proc_schedstat_init+0x0/0x22 @ 1
initcall proc_schedstat_init+0x0/0x22 returned 0 after 10 usecs
calling proc_execdomains_init+0x0/0x22 @ 1
initcall proc_execdomains_init+0x0/0x22 returned 0 after 10 usecs
calling ioresources_init+0x0/0x3c @ 1
initcall ioresources_init+0x0/0x3c returned 0 after 50 usecs
calling uid_cache_init+0x0/0x8d @ 1
initcall uid_cache_init+0x0/0x8d returned 0 after 71 usecs
calling init_posix_timers+0x0/0x19f @ 1
initcall init_posix_timers+0x0/0x19f returned 0 after 66 usecs
calling init_posix_cpu_timers+0x0/0xe5 @ 1
initcall init_posix_cpu_timers+0x0/0xe5 returned 0 after 0 usecs
calling nsproxy_cache_init+0x0/0x2d @ 1
initcall nsproxy_cache_init+0x0/0x2d returned 0 after 88 usecs
calling create_proc_profile+0x0/0x282 @ 1
initcall create_proc_profile+0x0/0x282 returned 0 after 0 usecs
calling timekeeping_init_device+0x0/0x22 @ 1
initcall timekeeping_init_device+0x0/0x22 returned 0 after 81 usecs
calling init_clocksource_sysfs+0x0/0x50 @ 1
initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 113 usecs
calling init_timer_list_procfs+0x0/0x2c @ 1
initcall init_timer_list_procfs+0x0/0x2c returned 0 after 11 usecs
calling init_tstats_procfs+0x0/0x2c @ 1
initcall init_tstats_procfs+0x0/0x2c returned 0 after 10 usecs
calling lockdep_proc_init+0x0/0x7c @ 1
initcall lockdep_proc_init+0x0/0x7c returned 0 after 38 usecs
calling futex_init+0x0/0xbe @ 1
initcall futex_init+0x0/0xbe returned 0 after 71 usecs
calling proc_dma_init+0x0/0x22 @ 1
initcall proc_dma_init+0x0/0x22 returned 0 after 11 usecs
calling proc_modules_init+0x0/0x22 @ 1
initcall proc_modules_init+0x0/0x22 returned 0 after 10 usecs
calling kallsyms_init+0x0/0x25 @ 1
initcall kallsyms_init+0x0/0x25 returned 0 after 10 usecs
calling snapshot_device_init+0x0/0x12 @ 1
initcall snapshot_device_init+0x0/0x12 returned 0 after 83 usecs
calling crash_save_vmcoreinfo_init+0x0/0x46d @ 1
initcall crash_save_vmcoreinfo_init+0x0/0x46d returned 0 after 22 usecs
calling crash_notes_memory_init+0x0/0x38 @ 1
initcall crash_notes_memory_init+0x0/0x38 returned 0 after 11 usecs
calling pid_namespaces_init+0x0/0x2d @ 1
initcall pid_namespaces_init+0x0/0x2d returned 0 after 100 usecs
calling ikconfig_init+0x0/0x39 @ 1
initcall ikconfig_init+0x0/0x39 returned 0 after 11 usecs
calling audit_init+0x0/0x153 @ 1
audit: initializing netlink socket (disabled)
type=2000 audit(1275218265.439:1): initialized
initcall audit_init+0x0/0x153 returned 0 after 8236 usecs
calling audit_tree_init+0x0/0x49 @ 1
initcall audit_tree_init+0x0/0x49 returned 0 after 2 usecs
calling init_kprobes+0x0/0x19e @ 1
initcall init_kprobes+0x0/0x19e returned 0 after 12070 usecs
calling hung_task_init+0x0/0x53 @ 1
initcall hung_task_init+0x0/0x53 returned 0 after 203 usecs
calling utsname_sysctl_init+0x0/0x14 @ 1
initcall utsname_sysctl_init+0x0/0x14 returned 0 after 83 usecs
calling init_tracepoints+0x0/0x17 @ 1
initcall init_tracepoints+0x0/0x17 returned 0 after 0 usecs
calling init_lstats_procfs+0x0/0x25 @ 1
initcall init_lstats_procfs+0x0/0x25 returned 0 after 12 usecs
calling ftrace_mod_cmd_init+0x0/0x12 @ 1
initcall ftrace_mod_cmd_init+0x0/0x12 returned 0 after 18 usecs
calling init_events+0x0/0x63 @ 1
initcall init_events+0x0/0x63 returned 0 after 11 usecs
calling init_sched_switch_trace+0x0/0x12 @ 1
initcall init_sched_switch_trace+0x0/0x12 returned 0 after 3 usecs
calling init_stack_trace+0x0/0x12 @ 1
initcall init_stack_trace+0x0/0x12 returned 0 after 1 usecs
calling init_function_trace+0x0/0x3e @ 1
initcall init_function_trace+0x0/0x3e returned 0 after 3 usecs
calling init_wakeup_tracer+0x0/0x22 @ 1
initcall init_wakeup_tracer+0x0/0x22 returned 0 after 3 usecs
calling stack_trace_init+0x0/0x6b @ 1
initcall stack_trace_init+0x0/0x6b returned 0 after 38 usecs
calling init_mmio_trace+0x0/0x12 @ 1
initcall init_mmio_trace+0x0/0x12 returned 0 after 1 usecs
calling init_graph_trace+0x0/0x32 @ 1
initcall init_graph_trace+0x0/0x32 returned 0 after 2 usecs
calling init_kmem_tracer+0x0/0x56 @ 1
initcall init_kmem_tracer+0x0/0x56 returned 0 after 4 usecs
calling init_blk_tracer+0x0/0x57 @ 1
initcall init_blk_tracer+0x0/0x57 returned 0 after 3 usecs
calling perf_event_sysfs_init+0x0/0x19 @ 1
initcall perf_event_sysfs_init+0x0/0x19 returned 0 after 14 usecs
calling init_per_zone_wmark_min+0x0/0x68 @ 1
initcall init_per_zone_wmark_min+0x0/0x68 returned 0 after 899 usecs
calling kswapd_init+0x0/0x78 @ 1
initcall kswapd_init+0x0/0x78 returned 0 after 336 usecs
calling setup_vmstat+0x0/0xc3 @ 1
initcall setup_vmstat+0x0/0xc3 returned 0 after 180 usecs
calling mm_sysfs_init+0x0/0x29 @ 1
initcall mm_sysfs_init+0x0/0x29 returned 0 after 9 usecs
calling proc_vmalloc_init+0x0/0x25 @ 1
initcall proc_vmalloc_init+0x0/0x25 returned 0 after 10 usecs
calling procswaps_init+0x0/0x22 @ 1
initcall procswaps_init+0x0/0x22 returned 0 after 10 usecs
calling hugetlb_init+0x0/0x3c8 @ 1
HugeTLB registered 2 MB page size, pre-allocated 0 pages
initcall hugetlb_init+0x0/0x3c8 returned 0 after 5058 usecs
calling slab_proc_init+0x0/0x25 @ 1
initcall slab_proc_init+0x0/0x25 returned 0 after 11 usecs
calling slab_sysfs_init+0x0/0xf0 @ 1
initcall slab_sysfs_init+0x0/0xf0 returned 0 after 17492 usecs
calling fasync_init+0x0/0x2a @ 1
initcall fasync_init+0x0/0x2a returned 0 after 247 usecs
calling proc_filesystems_init+0x0/0x22 @ 1
initcall proc_filesystems_init+0x0/0x22 returned 0 after 12 usecs
calling dnotify_init+0x0/0x80 @ 1
initcall dnotify_init+0x0/0x80 returned 0 after 546 usecs
calling inotify_setup+0x0/0x12 @ 1
initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs
calling inotify_user_setup+0x0/0xbe @ 1
initcall inotify_user_setup+0x0/0xbe returned 0 after 651 usecs
calling aio_setup+0x0/0xa5 @ 1
initcall aio_setup+0x0/0xa5 returned 0 after 3119 usecs
calling proc_locks_init+0x0/0x22 @ 1
initcall proc_locks_init+0x0/0x22 returned 0 after 13 usecs
calling init_sys32_ioctl+0x0/0x85 @ 1
initcall init_sys32_ioctl+0x0/0x85 returned 0 after 12 usecs
calling init_mbcache+0x0/0x14 @ 1
initcall init_mbcache+0x0/0x14 returned 0 after 1 usecs
calling dquot_init+0x0/0x105 @ 1
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
initcall dquot_init+0x0/0x105 returned 0 after 8080 usecs
calling init_v2_quota_format+0x0/0x12 @ 1
initcall init_v2_quota_format+0x0/0x12 returned 0 after 16 usecs
calling proc_cmdline_init+0x0/0x22 @ 1
initcall proc_cmdline_init+0x0/0x22 returned 0 after 12 usecs
calling proc_cpuinfo_init+0x0/0x22 @ 1
initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 10 usecs
calling proc_devices_init+0x0/0x22 @ 1
initcall proc_devices_init+0x0/0x22 returned 0 after 43 usecs
calling proc_interrupts_init+0x0/0x22 @ 1
initcall proc_interrupts_init+0x0/0x22 returned 0 after 10 usecs
calling proc_loadavg_init+0x0/0x22 @ 1
initcall proc_loadavg_init+0x0/0x22 returned 0 after 10 usecs
calling proc_meminfo_init+0x0/0x22 @ 1
initcall proc_meminfo_init+0x0/0x22 returned 0 after 10 usecs
calling proc_stat_init+0x0/0x22 @ 1
initcall proc_stat_init+0x0/0x22 returned 0 after 10 usecs
calling proc_uptime_init+0x0/0x22 @ 1
initcall proc_uptime_init+0x0/0x22 returned 0 after 10 usecs
calling proc_version_init+0x0/0x22 @ 1
initcall proc_version_init+0x0/0x22 returned 0 after 10 usecs
calling proc_softirqs_init+0x0/0x22 @ 1
initcall proc_softirqs_init+0x0/0x22 returned 0 after 10 usecs
calling proc_kcore_init+0x0/0xa9 @ 1
initcall proc_kcore_init+0x0/0xa9 returned 0 after 31 usecs
calling vmcore_init+0x0/0x8d2 @ 1
initcall vmcore_init+0x0/0x8d2 returned 0 after 0 usecs
calling proc_kmsg_init+0x0/0x25 @ 1
initcall proc_kmsg_init+0x0/0x25 returned 0 after 10 usecs
calling proc_page_init+0x0/0x42 @ 1
initcall proc_page_init+0x0/0x42 returned 0 after 19 usecs
calling init_devpts_fs+0x0/0x4c @ 1
initcall init_devpts_fs+0x0/0x4c returned 0 after 239 usecs
calling init_ext3_fs+0x0/0x71 @ 1
initcall init_ext3_fs+0x0/0x71 returned 0 after 568 usecs
calling init_ext4_fs+0x0/0xea @ 1
initcall init_ext4_fs+0x0/0xea returned 0 after 1547 usecs
calling journal_init+0x0/0x93 @ 1
initcall journal_init+0x0/0x93 returned 0 after 975 usecs
calling journal_init+0x0/0xec @ 1
initcall journal_init+0x0/0xec returned 0 after 1124 usecs
calling init_ramfs_fs+0x0/0x12 @ 1
initcall init_ramfs_fs+0x0/0x12 returned 0 after 3 usecs
calling init_hugetlbfs_fs+0x0/0x98 @ 1
initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 444 usecs
calling init_iso9660_fs+0x0/0x71 @ 1
initcall init_iso9660_fs+0x0/0x71 returned 0 after 306 usecs
calling init_nls_cp437+0x0/0x12 @ 1
initcall init_nls_cp437+0x0/0x12 returned 0 after 16 usecs
calling init_nls_ascii+0x0/0x12 @ 1
initcall init_nls_ascii+0x0/0x12 returned 0 after 1 usecs
calling ipc_init+0x0/0x23 @ 1
msgmni has been set to 21017
initcall ipc_init+0x0/0x23 returned 0 after 2645 usecs
calling ipc_sysctl_init+0x0/0x14 @ 1
initcall ipc_sysctl_init+0x0/0x14 returned 0 after 140 usecs
calling init_mqueue_fs+0x0/0xc9 @ 1
initcall init_mqueue_fs+0x0/0xc9 returned 0 after 600 usecs
calling key_proc_init+0x0/0x59 @ 1
initcall key_proc_init+0x0/0x59 returned 0 after 23 usecs
calling selinux_nf_ip_init+0x0/0x60 @ 1
SELinux: Registering netfilter hooks
initcall selinux_nf_ip_init+0x0/0x60 returned 0 after 3407 usecs
calling init_sel_fs+0x0/0x68 @ 1
initcall init_sel_fs+0x0/0x68 returned 0 after 996 usecs
calling selnl_init+0x0/0x4d @ 1
initcall selnl_init+0x0/0x4d returned 0 after 54 usecs
calling sel_netif_init+0x0/0x66 @ 1
initcall sel_netif_init+0x0/0x66 returned 0 after 6 usecs
calling sel_netnode_init+0x0/0x73 @ 1
initcall sel_netnode_init+0x0/0x73 returned 0 after 2 usecs
calling sel_netport_init+0x0/0x73 @ 1
initcall sel_netport_init+0x0/0x73 returned 0 after 9 usecs
calling aurule_init+0x0/0x37 @ 1
initcall aurule_init+0x0/0x37 returned 0 after 0 usecs
calling crypto_wq_init+0x0/0x32 @ 1
initcall crypto_wq_init+0x0/0x32 returned 0 after 2705 usecs
calling crypto_algapi_init+0x0/0xd @ 1
initcall crypto_algapi_init+0x0/0xd returned 0 after 49 usecs
calling skcipher_module_init+0x0/0x35 @ 1
initcall skcipher_module_init+0x0/0x35 returned 0 after 0 usecs
calling chainiv_module_init+0x0/0x12 @ 1
initcall chainiv_module_init+0x0/0x12 returned 0 after 37 usecs
calling eseqiv_module_init+0x0/0x12 @ 1
initcall eseqiv_module_init+0x0/0x12 returned 0 after 2 usecs
calling hmac_module_init+0x0/0x12 @ 1
initcall hmac_module_init+0x0/0x12 returned 0 after 1 usecs
calling md5_mod_init+0x0/0x12 @ 1
cryptomgr_test used greatest stack depth: 5672 bytes left
initcall md5_mod_init+0x0/0x12 returned 0 after 415 usecs
calling sha1_generic_mod_init+0x0/0x12 @ 1
initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 271 usecs
calling crc32c_mod_init+0x0/0x12 @ 1
initcall crc32c_mod_init+0x0/0x12 returned 0 after 330 usecs
calling krng_mod_init+0x0/0x12 @ 1
alg: No test for stdrng (krng)
initcall krng_mod_init+0x0/0x12 returned 0 after 212 usecs
calling proc_genhd_init+0x0/0x3c @ 1
initcall proc_genhd_init+0x0/0x3c returned 0 after 24 usecs
calling bsg_init+0x0/0x132 @ 1
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
initcall bsg_init+0x0/0x132 returned 0 after 308 usecs
calling noop_init+0x0/0x14 @ 1
io scheduler noop registered
initcall noop_init+0x0/0x14 returned 0 after 19 usecs
calling as_init+0x0/0x14 @ 1
io scheduler anticipatory registered
initcall as_init+0x0/0x14 returned 0 after 2 usecs
calling deadline_init+0x0/0x14 @ 1
io scheduler deadline registered
initcall deadline_init+0x0/0x14 returned 0 after 2 usecs
calling cfq_init+0x0/0x94 @ 1
io scheduler cfq registered (default)
initcall cfq_init+0x0/0x94 returned 0 after 495 usecs
calling debug_objects_init_debugfs+0x0/0x64 @ 1
initcall debug_objects_init_debugfs+0x0/0x64 returned 0 after 80 usecs
calling percpu_counter_startup+0x0/0x38 @ 1
initcall percpu_counter_startup+0x0/0x38 returned 0 after 2 usecs
calling dynamic_debug_init+0x0/0x127 @ 1
initcall dynamic_debug_init+0x0/0x127 returned 0 after 328 usecs
calling pci_proc_init+0x0/0x6b @ 1
initcall pci_proc_init+0x0/0x6b returned 0 after 820 usecs
calling pcie_portdrv_init+0x0/0x4c @ 1
alloc irq_desc for 4269 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 4268 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 4267 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 4266 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 4265 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 4264 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:1c.5: setting latency timer to 64
initcall pcie_portdrv_init+0x0/0x4c returned 0 after 4286 usecs
calling aer_service_init+0x0/0x2b @ 1
aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC
support
aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC
support
aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC
support
initcall aer_service_init+0x0/0x2b returned 0 after 202 usecs
calling pci_hotplug_init+0x0/0x1d @ 1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
initcall pci_hotplug_init+0x0/0x1d returned 0 after 1 usecs
calling pcied_init+0x0/0x79 @ 1
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
initcall pcied_init+0x0/0x79 returned 0 after 646 usecs
calling acpiphp_init+0x0/0x5f @ 1
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
initcall acpiphp_init+0x0/0x5f returned -19 after 2301 usecs
calling pci_stub_init+0x0/0x139 @ 1
pci-stub: invalid id string ""
initcall pci_stub_init+0x0/0x139 returned 0 after 146 usecs
calling fb_console_init+0x0/0x11d @ 1
cryptomgr_test used greatest stack depth: 5400 bytes left
initcall fb_console_init+0x0/0x11d returned 0 after 291391 usecs
calling xenfb_init+0x0/0x5d @ 1
initcall xenfb_init+0x0/0x5d returned -19 after 0 usecs
calling vesafb_init+0x0/0x23a @ 1
initcall vesafb_init+0x0/0x23a returned 0 after 195 usecs
calling efifb_init+0x0/0x1ed @ 1
initcall efifb_init+0x0/0x1ed returned -19 after 4 usecs
calling acpi_reserve_resources+0x0/0xeb @ 1
initcall acpi_reserve_resources+0x0/0xeb returned 0 after 9 usecs
calling irqrouter_init_sysfs+0x0/0x38 @ 1
initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 78 usecs
calling acpi_ac_init+0x0/0x45 @ 1
initcall acpi_ac_init+0x0/0x45 returned 0 after 182 usecs
calling acpi_button_init+0x0/0x56 @ 1
input: Power Button
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
initcall acpi_button_init+0x0/0x56 returned 0 after 18361 usecs
calling acpi_fan_init+0x0/0x56 @ 1
initcall acpi_fan_init+0x0/0x56 returned 0 after 124 usecs
calling acpi_pci_slot_init+0x0/0x20 @ 1
initcall acpi_pci_slot_init+0x0/0x20 returned 0 after 1902 usecs
calling acpi_processor_init+0x0/0x132 @ 1
ACPI: SSDT 00000000bf77e1e0 02B94 (v01 DpgPmm P001Ist 00000011 INTL
20051117)
ACPI: SSDT 00000000bf780d80 00980 (v01 PmRef P001Cst 00003001 INTL
20051117)
ACPI: SSDT 00000000bf781700 006E2 (v01 PmRef Cpu0Tst 00003000 INTL
20051117)
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
initcall acpi_processor_init+0x0/0x132 returned 0 after 629629 usecs
calling acpi_container_init+0x0/0x42 @ 1
initcall acpi_container_init+0x0/0x42 returned 0 after 13724 usecs
calling acpi_thermal_init+0x0/0x7b @ 1
initcall acpi_thermal_init+0x0/0x7b returned 0 after 169 usecs
calling acpi_battery_init+0x0/0x16 @ 1
initcall acpi_battery_init+0x0/0x16 returned 0 after 30 usecs
calling 1_acpi_battery_init_async+0x0/0x3c @ 233
initcall 1_acpi_battery_init_async+0x0/0x3c returned 0 after 244 usecs
calling evtchn_init+0x0/0x7e @ 1
Event-channel device installed.
initcall evtchn_init+0x0/0x7e returned 0 after 2902 usecs
calling gntdev_init+0x0/0x3d @ 1
initcall gntdev_init+0x0/0x3d returned 0 after 117 usecs
calling pciback_init+0x0/0x15f @ 1
initcall pciback_init+0x0/0x15f returned 0 after 4695 usecs
calling blkif_init+0x0/0x171 @ 1
initcall blkif_init+0x0/0x171 returned 0 after 3660 usecs
calling blktap_init+0x0/0xa7 @ 1
blktap_device_init: blktap device major 253
blktap_ring_init: blktap ring major: 251
initcall blktap_init+0x0/0xa7 returned 0 after 10464 usecs
calling netback_init+0x0/0x207 @ 1
registering netback
initcall netback_init+0x0/0x207 returned 0 after 2961 usecs
calling hypervisor_subsys_init+0x0/0x25 @ 1
initcall hypervisor_subsys_init+0x0/0x25 returned 0 after 0 usecs
calling hyper_sysfs_init+0x0/0xf2 @ 1
initcall hyper_sysfs_init+0x0/0xf2 returned 0 after 79 usecs
calling platform_pci_module_init+0x0/0xa3 @ 1
xen-platform-pcifailed backend handshake: unrecognised magic value
initcall platform_pci_module_init+0x0/0xa3 returned -19 after 5839 usecs
calling mcelog_init+0x0/0x1b0 @ 1
alloc irq_desc for 4263 on node 0
alloc kstat_irqs on node 0
initcall mcelog_init+0x0/0x1b0 returned 0 after 6418 usecs
calling rand_initialize+0x0/0x31 @ 1
initcall rand_initialize+0x0/0x31 returned 0 after 30 usecs
calling tty_init+0x0/0xf5 @ 1
initcall tty_init+0x0/0xf5 returned 0 after 6277 usecs
calling pty_init+0x0/0x336 @ 1
initcall pty_init+0x0/0x336 returned 0 after 243 usecs
calling sysrq_init+0x0/0x25 @ 1
initcall sysrq_init+0x0/0x25 returned 0 after 14 usecs
calling xen_hvc_init+0x0/0xe2 @ 1
alloc irq_desc for 4262 on node 0
alloc kstat_irqs on node 0
initcall xen_hvc_init+0x0/0xe2 returned 0 after 6895 usecs
calling raw_init+0x0/0xe5 @ 1
initcall raw_init+0x0/0xe5 returned 0 after 149 usecs
calling hpet_init+0x0/0x6a @ 1
hpet_acpi_add: no address or irqs in _CRS
initcall hpet_init+0x0/0x6a returned 0 after 4307 usecs
calling nvram_init+0x0/0x82 @ 1
Non-volatile memory driver v1.3
initcall nvram_init+0x0/0x82 returned 0 after 2886 usecs
calling agp_init+0x0/0x26 @ 1
Linux agpgart interface v0.103
initcall agp_init+0x0/0x26 returned 0 after 2792 usecs
calling agp_intel_init+0x0/0x29 @ 1
initcall agp_intel_init+0x0/0x29 returned 0 after 111 usecs
calling agp_sis_init+0x0/0x29 @ 1
initcall agp_sis_init+0x0/0x29 returned 0 after 133 usecs
calling agp_via_init+0x0/0x29 @ 1
initcall agp_via_init+0x0/0x29 returned 0 after 101 usecs
calling init_tis+0x0/0x91 @ 1
initcall init_tis+0x0/0x91 returned 0 after 65 usecs
calling cn_proc_init+0x0/0x3d @ 1
initcall cn_proc_init+0x0/0x3d returned 0 after 45 usecs
calling serial8250_init+0x0/0x143 @ 1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
async_waiting @ 1
async_continuing @ 1 after 10 usec
(XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'.
(XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'.
(XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'.
(XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'.
async_waiting @ 1
async_continuing @ 1 after 1 usec
(XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'.
(XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'.
(XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'.
(XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'.
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
initcall serial8250_init+0x0/0x143 returned 0 after 308270 usecs
calling serial8250_pnp_init+0x0/0x12 @ 1
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
initcall serial8250_pnp_init+0x0/0x12 returned 0 after 5240 usecs
calling serial8250_pci_init+0x0/0x1b @ 1
initcall serial8250_pci_init+0x0/0x1b returned 0 after 114 usecs
calling init_kgdboc+0x0/0x16 @ 1
initcall init_kgdboc+0x0/0x16 returned 0 after 0 usecs
calling topology_sysfs_init+0x0/0x63 @ 1
initcall topology_sysfs_init+0x0/0x63 returned 0 after 470 usecs
calling brd_init+0x0/0x16d @ 1
brd: module loaded
initcall brd_init+0x0/0x16d returned 0 after 8259 usecs
calling loop_init+0x0/0x197 @ 1
loop: module loaded
initcall loop_init+0x0/0x197 returned 0 after 4968 usecs
calling init_kgdbts+0x0/0x16 @ 1
initcall init_kgdbts+0x0/0x16 returned 0 after 0 usecs
calling mac_hid_init+0x0/0xd5 @ 1
input: Macintosh mouse button emulation as /devices/virtual/input/input2
initcall mac_hid_init+0x0/0xd5 returned 0 after 6552 usecs
calling scsi_dh_init+0x0/0x3f @ 1
initcall scsi_dh_init+0x0/0x3f returned 0 after 1 usecs
calling init_sd+0x0/0x17b @ 1
initcall init_sd+0x0/0x17b returned 0 after 420 usecs
calling init_sr+0x0/0x49 @ 1
initcall init_sr+0x0/0x49 returned 0 after 51 usecs
calling init_sg+0x0/0x123 @ 1
initcall init_sg+0x0/0x123 returned 0 after 136 usecs
calling ahci_init+0x0/0x1b @ 1
ahci 0000:00:1f.2: version 3.0
xen: registering gsi 19 triggering 0 polarity 1
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
xen: --> irq=19
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 4261 on node 0
alloc kstat_irqs on node 0
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA
mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbbd6000 port 0xfbbd6100 irq 4261
ata2: SATA max UDMA/133 abar m2048@0xfbbd6000 port 0xfbbd6180 irq 4261
ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
irq 4261
ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
irq 4261
ata5: SATA max UDMA/133 abar m2048@0xfbbd6000 port 0xfbbd6300 irq 4261
ata6: SATA max UDMA/133 abar m2048@0xfbbd6000 port 0xfbbd6380 irq 4261
calling 2_async_port_probe+0x0/0xc9 @ 233
initcall ahci_init+0x0/0x1b returned 0 after 109920 usecs
calling piix_init+0x0/0x29 @ 1
initcall piix_init+0x0/0x29 returned 0 after 136 usecs
calling fixed_mdio_bus_init+0x0/0xd0 @ 1
Fixed MDIO Bus: probed
initcall fixed_mdio_bus_init+0x0/0xd0 returned 0 after 189 usecs
calling net_olddevs_init+0x0/0x9e @ 1
initcall net_olddevs_init+0x0/0x9e returned 0 after 3 usecs
calling netif_init+0x0/0x6a @ 1
initcall netif_init+0x0/0x6a returned 0 after 0 usecs
calling cdrom_init+0x0/0x6a @ 1
initcall cdrom_init+0x0/0x6a returned 0 after 195 usecs
calling mon_init+0x0/0x117 @ 1
initcall mon_init+0x0/0x117 returned 0 after 283 usecs
calling ehci_hcd_init+0x0/0xc0 @ 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
xen: registering gsi 18 triggering 0 polarity 1
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
xen: --> irq=18
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbbde000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32.13 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xen: registering gsi 23 triggering 0 polarity 1
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
xen: --> irq=23
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbbdc000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32.13 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
initcall ehci_hcd_init+0x0/0xc0 returned 0 after 36306 usecs
calling ohci_hcd_mod_init+0x0/0x92 @ 1
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
initcall ohci_hcd_mod_init+0x0/0x92 returned 0 after 121 usecs
calling uhci_hcd_init+0x0/0xc0 @ 1
uhci_hcd: USB Universal Host Controller Interface driver
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ac00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32.13 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xen: registering gsi 21 triggering 0 polarity 1
alloc irq_desc for 21 on node 0
alloc kstat_irqs on node 0
xen: --> irq=21
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32.13 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xen: registering gsi 19 triggering 0 polarity 1
xen_allocate_pirq: returning irq 19 for gsi 19
xen: --> irq=19
Already setup the GSI :19
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000a800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32.13 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xen: registering gsi 23 triggering 0 polarity 1
xen_allocate_pirq: returning irq 23 for gsi 23
xen: --> irq=23
Already setup the GSI :23
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a480
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32.13 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xen: registering gsi 19 triggering 0 polarity 1
xen_allocate_pirq: returning irq 19 for gsi 19
xen: --> irq=19
Already setup the GSI :19
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32.13 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xen: registering gsi 18 triggering 0 polarity 1
xen_allocate_pirq: returning irq 18 for gsi 18
xen: --> irq=18
Already setup the GSI :18
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a080
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32.13 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
initcall uhci_hcd_init+0x0/0xc0 returned 0 after 27682 usecs
calling i8042_init+0x0/0x3a7 @ 1
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall i8042_init+0x0/0x3a7 returned 0 after 3611 usecs
calling serport_init+0x0/0x34 @ 1
initcall serport_init+0x0/0x34 returned 0 after 1 usecs
calling mousedev_init+0x0/0x62 @ 1
mice: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x62 returned 0 after 614 usecs
calling evdev_init+0x0/0x12 @ 1
initcall evdev_init+0x0/0x12 returned 0 after 447 usecs
calling atkbd_init+0x0/0x27 @ 1
initcall atkbd_init+0x0/0x27 returned 0 after 105 usecs
calling psmouse_init+0x0/0x74 @ 1
initcall psmouse_init+0x0/0x74 returned 0 after 442 usecs
calling xenkbd_init+0x0/0x5d @ 1
initcall xenkbd_init+0x0/0x5d returned -19 after 0 usecs
calling cmos_init+0x0/0x6d @ 1
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
initcall cmos_init+0x0/0x6d returned 0 after 619 usecs
calling dm_init+0x0/0x49 @ 1
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@xxxxxxxxxx
initcall dm_init+0x0/0x49 returned 0 after 1824 usecs
calling dm_snapshot_init+0x0/0x26a @ 1
initcall dm_snapshot_init+0x0/0x26a returned 0 after 898 usecs
calling dm_mirror_init+0x0/0x79 @ 1
initcall dm_mirror_init+0x0/0x79 returned 0 after 252 usecs
calling dm_dirty_log_init+0x0/0x59 @ 1
initcall dm_dirty_log_init+0x0/0x59 returned 0 after 16 usecs
calling dm_zero_init+0x0/0x31 @ 1
initcall dm_zero_init+0x0/0x31 returned 0 after 1 usecs
calling init_ladder+0x0/0x12 @ 1
cpuidle: using governor ladder
initcall init_ladder+0x0/0x12 returned 0 after 19 usecs
calling init_menu+0x0/0x12 @ 1
cpuidle: using governor menu
initcall init_menu+0x0/0x12 returned 0 after 2 usecs
calling efivars_init+0x0/0x213 @ 1
initcall efivars_init+0x0/0x213 returned -19 after 0 usecs
calling hid_init+0x0/0x66 @ 1
initcall hid_init+0x0/0x66 returned 0 after 175 usecs
calling a4_init+0x0/0x1b @ 1
initcall a4_init+0x0/0x1b returned 0 after 68 usecs
calling apple_init+0x0/0x38 @ 1
initcall apple_init+0x0/0x38 returned 0 after 84 usecs
calling belkin_init+0x0/0x1b @ 1
initcall belkin_init+0x0/0x1b returned 0 after 65 usecs
calling ch_init+0x0/0x1b @ 1
initcall ch_init+0x0/0x1b returned 0 after 59 usecs
calling ch_init+0x0/0x1b @ 1
initcall ch_init+0x0/0x1b returned 0 after 69 usecs
calling cp_init+0x0/0x1b @ 1
initcall cp_init+0x0/0x1b returned 0 after 65 usecs
calling dr_init+0x0/0x1b @ 1
initcall dr_init+0x0/0x1b returned 0 after 56 usecs
calling ez_init+0x0/0x1b @ 1
initcall ez_init+0x0/0x1b returned 0 after 57 usecs
calling gyration_init+0x0/0x1b @ 1
initcall gyration_init+0x0/0x1b returned 0 after 52 usecs
calling ks_init+0x0/0x1b @ 1
initcall ks_init+0x0/0x1b returned 0 after 98 usecs
calling kye_init+0x0/0x1b @ 1
initcall kye_init+0x0/0x1b returned 0 after 60 usecs
calling lg_init+0x0/0x1b @ 1
initcall lg_init+0x0/0x1b returned 0 after 73 usecs
calling ms_init+0x0/0x1b @ 1
initcall ms_init+0x0/0x1b returned 0 after 68 usecs
calling mr_init+0x0/0x1b @ 1
initcall mr_init+0x0/0x1b returned 0 after 64 usecs
calling ntrig_init+0x0/0x1b @ 1
initcall ntrig_init+0x0/0x1b returned 0 after 72 usecs
calling pl_init+0x0/0x1b @ 1
initcall pl_init+0x0/0x1b returned 0 after 64 usecs
calling pl_init+0x0/0x1b @ 1
initcall pl_init+0x0/0x1b returned 0 after 71 usecs
calling samsung_init+0x0/0x1b @ 1
initcall samsung_init+0x0/0x1b returned 0 after 59 usecs
calling sjoy_init+0x0/0x1b @ 1
initcall sjoy_init+0x0/0x1b returned 0 after 64 usecs
calling sony_init+0x0/0x1b @ 1
initcall sony_init+0x0/0x1b returned 0 after 70 usecs
calling sp_init+0x0/0x1b @ 1
initcall sp_init+0x0/0x1b returned 0 after 57 usecs
calling ga_init+0x0/0x1b @ 1
initcall ga_init+0x0/0x1b returned 0 after 52 usecs
calling tm_init+0x0/0x1b @ 1
initcall tm_init+0x0/0x1b returned 0 after 52 usecs
calling ts_init+0x0/0x1b @ 1
initcall ts_init+0x0/0x1b returned 0 after 57 usecs
calling twinhan_init+0x0/0x1b @ 1
initcall twinhan_init+0x0/0x1b returned 0 after 85 usecs
calling zp_init+0x0/0x1b @ 1
initcall zp_init+0x0/0x1b returned 0 after 70 usecs
calling hid_init+0x0/0xcb @ 1
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
initcall hid_init+0x0/0xcb returned 0 after 446 usecs
calling flow_cache_init+0x0/0x1b0 @ 1
initcall flow_cache_init+0x0/0x1b0 returned 0 after 350 usecs
calling blackhole_module_init+0x0/0x12 @ 1
initcall blackhole_module_init+0x0/0x12 returned 0 after 2 usecs
calling init_cgroup_cls+0x0/0x12 @ 1
initcall init_cgroup_cls+0x0/0x12 returned 0 after 21 usecs
calling nf_conntrack_standalone_init+0x0/0x12 @ 1
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option
or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after 22301
usecs
calling xt_init+0x0/0x190 @ 1
initcall xt_init+0x0/0x190 returned 0 after 42 usecs
calling tcpudp_mt_init+0x0/0x17 @ 1
initcall tcpudp_mt_init+0x0/0x17 returned 0 after 25 usecs
calling conntrack_mt_init+0x0/0x17 @ 1
initcall conntrack_mt_init+0x0/0x17 returned 0 after 2 usecs
calling state_mt_init+0x0/0x17 @ 1
initcall state_mt_init+0x0/0x17 returned 0 after 2 usecs
calling sysctl_ipv4_init+0x0/0x4e @ 1
initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 2354 usecs
calling init_syncookies+0x0/0x19 @ 1
initcall init_syncookies+0x0/0x19 returned 0 after 44 usecs
calling ipv4_netfilter_init+0x0/0x17 @ 1
initcall ipv4_netfilter_init+0x0/0x17 returned 0 after 16 usecs
calling nf_conntrack_l3proto_ipv4_init+0x0/0x12d @ 1
initcall nf_conntrack_l3proto_ipv4_init+0x0/0x12d returned 0 after 506
usecs
calling nf_defrag_init+0x0/0x17 @ 1
initcall nf_defrag_init+0x0/0x17 returned 0 after 2 usecs
calling ip_tables_init+0x0/0xaf @ 1
ip_tables: (C) 2000-2006 Netfilter Core Team
initcall ip_tables_init+0x0/0xaf returned 0 after 44 usecs
calling iptable_filter_init+0x0/0x6c @ 1
initcall iptable_filter_init+0x0/0x6c returned 0 after 136 usecs
calling reject_tg_init+0x0/0x12 @ 1
initcall reject_tg_init+0x0/0x12 returned 0 after 3 usecs
calling cubictcp_register+0x0/0x65 @ 1
TCP cubic registered
initcall cubictcp_register+0x0/0x65 returned 0 after 3 usecs
calling xfrm_user_init+0x0/0x4d @ 1
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x4d returned 0 after 49 usecs
calling packet_init+0x0/0x47 @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x47 returned 0 after 45 usecs
calling dsa_init_module+0x0/0x14 @ 1
initcall dsa_init_module+0x0/0x14 returned 0 after 1 usecs
calling edsa_init_module+0x0/0x14 @ 1
initcall edsa_init_module+0x0/0x14 returned 0 after 1 usecs
calling trailer_init_module+0x0/0x14 @ 1
initcall trailer_init_module+0x0/0x14 returned 0 after 1 usecs
calling mv88e6060_init+0x0/0x14 @ 1
initcall mv88e6060_init+0x0/0x14 returned 0 after 14 usecs
calling mv88e6123_61_65_init+0x0/0x14 @ 1
initcall mv88e6123_61_65_init+0x0/0x14 returned 0 after 1 usecs
calling mv88e6131_init+0x0/0x14 @ 1
initcall mv88e6131_init+0x0/0x14 returned 0 after 1 usecs
calling dsa_init_module+0x0/0x12 @ 1
initcall dsa_init_module+0x0/0x12 returned 0 after 73 usecs
calling dcbnl_init+0x0/0x32 @ 1
initcall dcbnl_init+0x0/0x32 returned 0 after 0 usecs
calling mce_debugfs_init+0x0/0x3b @ 1
initcall mce_debugfs_init+0x0/0x3b returned 0 after 46 usecs
calling severities_debugfs_init+0x0/0x3b @ 1
initcall severities_debugfs_init+0x0/0x3b returned 0 after 18 usecs
calling hpet_insert_resource+0x0/0x23 @ 1
initcall hpet_insert_resource+0x0/0x23 returned 0 after 3 usecs
calling update_mp_table+0x0/0x689 @ 1
initcall update_mp_table+0x0/0x689 returned 0 after 0 usecs
calling lapic_insert_resource+0x0/0x40 @ 1
initcall lapic_insert_resource+0x0/0x40 returned -1 after 0 usecs
initcall lapic_insert_resource+0x0/0x40 returned with error code -1
calling init_lapic_nmi_sysfs+0x0/0x39 @ 1
initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 0 usecs
calling io_apic_bug_finalize+0x0/0x1b @ 1
initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs
calling check_early_ioremap_leak+0x0/0x67 @ 1
initcall check_early_ioremap_leak+0x0/0x67 returned 0 after 0 usecs
calling pat_memtype_list_init+0x0/0x29 @ 1
initcall pat_memtype_list_init+0x0/0x29 returned 0 after 19 usecs
calling sched_init_debug+0x0/0x24 @ 1
initcall sched_init_debug+0x0/0x24 returned 0 after 18 usecs
calling init_oops_id+0x0/0x36 @ 1
initcall init_oops_id+0x0/0x36 returned 0 after 8 usecs
calling disable_boot_consoles+0x0/0x5c @ 1
initcall disable_boot_consoles+0x0/0x5c returned 0 after 0 usecs
calling pm_qos_power_init+0x0/0xca @ 1
initcall pm_qos_power_init+0x0/0xca returned 0 after 352 usecs
calling test_suspend+0x0/0x19d @ 1
initcall test_suspend+0x0/0x19d returned 0 after 0 usecs
calling software_resume+0x0/0x20f @ 1
PM: Resume from disk failed.
initcall software_resume+0x0/0x20f returned -2 after 15 usecs
initcall software_resume+0x0/0x20f returned with error code -2
calling debugfs_kprobe_init+0x0/0x8e @ 1
initcall debugfs_kprobe_init+0x0/0x8e returned 0 after 111 usecs
calling taskstats_init+0x0/0x95 @ 1
registered taskstats version 1
initcall taskstats_init+0x0/0x95 returned 0 after 35 usecs
calling clear_boot_tracer+0x0/0x2d @ 1
initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs
calling fail_page_alloc_debugfs+0x0/0xe4 @ 1
initcall fail_page_alloc_debugfs+0x0/0xe4 returned 0 after 193 usecs
calling max_swapfiles_check+0x0/0x8 @ 1
initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
calling failslab_debugfs_init+0x0/0x6b @ 1
initcall failslab_debugfs_init+0x0/0x6b returned 0 after 135 usecs
calling init_ima+0x0/0x1a @ 1
No TPM chip found, activating TPM-bypass!
initcall init_ima+0x0/0x1a returned 0 after 615 usecs
calling fail_make_request_debugfs+0x0/0x19 @ 1
initcall fail_make_request_debugfs+0x0/0x19 returned 0 after 306 usecs
calling random32_reseed+0x0/0xa9 @ 1
initcall random32_reseed+0x0/0xa9 returned 0 after 147 usecs
calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 6
usecs
calling pci_sysfs_init+0x0/0x4c @ 1
initcall pci_sysfs_init+0x0/0x4c returned 0 after 3427 usecs
calling boot_wait_for_devices+0x0/0x19 @ 1
initcall boot_wait_for_devices+0x0/0x19 returned 0 after 1 usecs
calling regulator_init_complete+0x0/0x14b @ 1
initcall regulator_init_complete+0x0/0x14b returned 0 after 16 usecs
calling seqgen_init+0x0/0xf @ 1
initcall seqgen_init+0x0/0xf returned 0 after 46 usecs
calling late_resume_init+0x0/0x124 @ 1
Magic number: 10:134:278
tty tty15: hash matches
initcall late_resume_init+0x0/0x124 returned 0 after 92 usecs
calling scsi_complete_async_scans+0x0/0x148 @ 1
initcall scsi_complete_async_scans+0x0/0x148 returned 0 after 0 usecs
calling rtc_hctosys+0x0/0x152 @ 1
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: New USB device found, idVendor=2001, idProduct=f103
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 7 ports detected
usb 2-1.2: new full speed USB device using ehci_hcd and address 4
usb 2-1.2: New USB device found, idVendor=04e8, idProduct=326c
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2: Product: Samsung ML-2010
usb 2-1.2: Manufacturer: Samsung
usb 2-1.2: SerialNumber: 3A61BKCL919879R.
usb 2-1.2: configuration #1 chosen from 1 choice
usb 6-2: new low speed USB device using uhci_hcd and address 2
usb 6-2: New USB device found, idVendor=05af, idProduct=0408
usb 6-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 6-2: Product: 2.4G USB RF KeyBoard
usb 6-2: configuration #1 chosen from 1 choice
input: 2.4G USB RF KeyBoard
as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input3
generic-usb 0003:05AF:0408.0001: input,hidraw0: USB HID v1.10 Keyboard
[2.4G USB RF KeyBoard] on usb-0000:00:1d.0-2/input0
input: 2.4G USB RF KeyBoard
as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input4
generic-usb 0003:05AF:0408.0002: input,hidraw1: USB HID v1.10 Mouse
[2.4G USB RF KeyBoard] on usb-0000:00:1d.0-2/input1
input: 2.4G USB RF KeyBoard
as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/input/input5
rtc_cmos 00:03: setting system clock to 2010-05-30 11:17:51 UTC
(1275218271)
initcall rtc_hctosys+0x0/0x152 returned 0 after 1682629 usecs
calling memmap_init+0x0/0xa3 @ 1
calling 3_async_port_probe+0x0/0xc9 @ 261
generic-usb 0003:05AF:0408.0003: input,hiddev96,hidraw2: USB HID v1.10
Device [2.4G USB RF KeyBoard] on usb-0000:00:1d.0-2/input2
initcall memmap_init+0x0/0xa3 returned 0 after 811 usecs
calling pci_mmcfg_late_insert_resources+0x0/0x163 @ 1
initcall pci_mmcfg_late_insert_resources+0x0/0x163 returned 0 after 8
usecs
calling init_net_drop_monitor+0x0/0x17e @ 1
Initalizing network drop monitor service
initcall init_net_drop_monitor+0x0/0x17e returned 0 after 290 usecs
calling tcp_congestion_default+0x0/0x12 @ 1
initcall tcp_congestion_default+0x0/0x12 returned 0 after 1 usecs
calling initialize_hashrnd+0x0/0x19 @ 1
initcall initialize_hashrnd+0x0/0x19 returned 0 after 7 usecs
async_waiting @ 1
async_waiting @ 261
calling 4_async_port_probe+0x0/0xc9 @ 262
calling 5_async_port_probe+0x0/0xc9 @ 263
async_waiting @ 263
calling 6_async_port_probe+0x0/0xc9 @ 264
async_waiting @ 264
calling 7_async_port_probe+0x0/0xc9 @ 265
async_waiting @ 265
async_waiting @ 262
ata1: SATA link down (SStatus 0 SControl 300)
async_waiting @ 233
async_continuing @ 233 after 3 usec
initcall 2_async_port_probe+0x0/0xc9 returned 0 after 313154 usecs
async_continuing @ 261 after 236544 usec
ata2: SATA link down (SStatus 0 SControl 300)
async_waiting @ 261
async_continuing @ 261 after 1 usec
initcall 3_async_port_probe+0x0/0xc9 returned 0 after 555507 usecs
async_continuing @ 262 after 536879 usec
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD7501AALS-00J7B1, 05.00K05, max UDMA/133
ata3.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
async_waiting @ 262
async_continuing @ 262 after 1 usec
scsi 2:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0
ANSI: 5
calling 8_sd_probe_async+0x0/0x1e3 @ 261
sd 2:0:0:0: Attached scsi generic sg0 type 0
initcall 4_async_port_probe+0x0/0xc9 returned 0 after 1292146 usecs
async_continuing @ 263 after 1312855 usec
sd 2:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
initcall 8_sd_probe_async+0x0/0x1e3 returned 0 after 38221 usecs
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100
ata4.00: configured for UDMA/100
async_waiting @ 263
async_continuing @ 263 after 2 usec
scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01 PQ: 0
ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
initcall 5_async_port_probe+0x0/0xc9 returned 0 after 2200976 usecs
async_continuing @ 264 after 2206705 usec
async/2 used greatest stack depth: 4248 bytes left
ata5: SATA link down (SStatus 0 SControl 300)
async_waiting @ 264
async_continuing @ 264 after 1 usec
initcall 6_async_port_probe+0x0/0xc9 returned 0 after 2523975 usecs
async_continuing @ 265 after 2529786 usec
ata6: SATA link down (SStatus 0 SControl 300)
async_waiting @ 265
async_continuing @ 265 after 1 usec
initcall 7_async_port_probe+0x0/0xc9 returned 0 after 2847040 usecs
async_continuing @ 1 after 2919764 usec
Freeing unused kernel memory: 3380k freed
Write protecting the kernel read-only data: 7004k
mLoading, please wait...
calling i2c_init+0x0/0x70 [i2c_core] @ 297
initcall i2c_init+0x0/0x70 [i2c_core] returned 0 after 220 usecs
calling nvidiafb_init+0x0/0x25 [nvidiafb] @ 297
nvidiafb 0000:01:00.0: enabling device (0140 -> 0143)
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
nvidiafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidiafb: Device ID: 10de042f
nvidiafb: unknown NV_ARCH
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
nvidiafb 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidiafb: Device ID: 10de06fd
nvidiafb: unknown NV_ARCH
initcall nvidiafb_init+0x0/0x25 [nvidiafb] returned 0 after 67706 usecs
calling megasas_init+0x0/0x16f [megaraid_sas] @ 666
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
megasas: 0x1028:0x0015:0x1028:0x1f03: bus 5:slot 14:func 0
xen: registering gsi 18 triggering 0 polarity 1
xen_allocate_pirq: returning irq 18 for gsi 18
xen: --> irq=18
Already setup the GSI :18
megaraid_sas 0000:05:0e.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
megasas: FW now in Ready state
calling e1000_init_module+0x0/0(XEN) [VT-D]iommu.c:821:
iommu_fault_status: Primary Pending Fault
x70 [e1000e] @ 6(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device
[05:08.0] fault addr 2d0842000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
76
(XEN) print_vtd_entries: iommu = ffff83013ff7b130 bdf = 5:8.0 gmfn =
2d0842
scsi6 : LSI SAS (XEN) root_entry = ffff83013ff37000
based MegaRAID d(XEN) root_entry[5] = 13cf13001
river
(XEN) context = ffff83013cf13000
initcall megasas(XEN) context[40] = 0_0
_init+0x0/0x16f (XEN) ctxt_entry[40] not present
[megaraid_sas] r(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary
Pending Fault
eturned 0 after (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device
[05:08.0] fault addr 2d0842000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
73201 usecs
(XEN) print_vtd_entries: iommu = ffff83013ff7b130 bdf = 5:8.0 gmfn =
2d0842
scsi scan: INQUI(XEN) root_entry = ffff83013ff37000
RY result too sh(XEN) root_entry[5] = 13cf13001
ort (5), using 3(XEN) context = ffff83013cf13000
6
(XEN) context[40] = 0_0
scsi 6:0:0:0: Di(XEN) ctxt_entry[40] not present
rect-Access PQ: 0 ANSI: 0
scsi scan: INQUIRY result too short (5), using 36
scsi 6:0:1:0: Direct-Access PQ: 0
ANSI: 0
scsi scan: INQUIRY result too short (5), using 36
scsi 6:0:2:0: Direct-Access PQ: 0
ANSI: 0
scsi scan: INQUIRY result too short (5), using 36
scsi 6:0:3:0: Direct-Access PQ: 0
ANSI: 0
scsi 6:2:0:0: Direct-Access DELL PERC 5/i 1.03 PQ: 0
ANSI: 5
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:07:00.0: Disabling L1 ASPM
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
e1000e 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:07:00.0: setting latency timer to 64
alloc irq_desc for 4260 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4259 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4258 on node 0
sd 6:2:0:0: Attached scsi generic sg2 type 0
scsi_scan_6 used(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary
Pending Fault
greatest stack (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device
[05:08.0] fault addr 2cfa6e000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
depth: 4088 byte(XEN) print_vtd_entries: iommu = ffff83013ff7b130 bdf =
5:8.0 gmfn = 2cfa6e
s left
(XEN) root_entry = ffff83013ff37000
sd 6:2:0:0: [sdb(XEN) root_entry[5] = 13cf13001
] 211550208 512-(XEN) context = ffff83013cf13000
byte logical blo(XEN) context[40] = 0_0
cks: (108 GB/100(XEN) ctxt_entry[40] not present
GiB)
sd 6:2:0:0: [sdb] Write Protect is off
sd 6:2:0:0: [sdb] Mode Sense: 1f 00 00 08
sd 6:2:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
sdb: unknown partition table
alloc kstat_irqs on node 0
sd 6:2:0:0: [sdb] Attached SCSI disk
0000:07:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:30:48:b8:de:18
0000:07:00.0: eth0: Intel(R) PRO/1000 Network Connection
0000:07:00.0: eth0: MAC: 3, PHY: 8, PBA No: 0101ff-0ff
e1000e 0000:08:00.0: Disabling L1 ASPM
xen: registering gsi 17 triggering 0 polarity 1
xen_allocate_pirq: returning irq 17 for gsi 17
xen: --> irq=17
Already setup the GSI :17
e1000e 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:08:00.0: setting latency timer to 64
alloc irq_desc for 4257 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4256 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 4255 on node 0
alloc kstat_irqs on node 0
scsi_id used greatest stack depth: 3904 bytes left
0000:08:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:30:48:b8:de:19
0000:08:00.0: eth1: Intel(R) PRO/1000 Network Connection
0000:08:00.0: eth1: MAC: 3, PHY: 8, PBA No: 0101ff-0ff
initcall e1000_init_module+0x0/0x70 [e1000e] returned 0 after 392599
usecs
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
addr 2cede1000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
(XEN) print_vtd_entries: iommu = ffff83013ff7b130 bdf = 5:8.0 gmfn =
2cede1
(XEN) root_entry = ffff83013ff37000
(XEN) root_entry[5] = 13cf13001
(XEN) context = ffff83013cf13000
(XEN) context[40] = 0_0
(XEN) ctxt_entry[40] not present
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
addr 2cede3000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
(XEN) print_vtd_entries: iommu = ffff83013ff7b130 bdf = 5:8.0 gmfn =
2cede3
(XEN) root_entry = ffff83013ff37000
(XEN) root_entry[5] = 13cf13001
(XEN) context = ffff83013cf13000
(XEN) context[40] = 0_0
(XEN) ctxt_entry[40] not present
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
addr 2cede2000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
(XEN) print_vtd_entries: iommu = ffff83013ff7b130 bdf = 5:8.0 gmfn =
2cede2
(XEN) root_entry = ffff83013ff37000
(XEN) root_entry[5] = 13cf13001
(XEN) context = ffff83013cf13000
(XEN) context[40] = 0_0
(XEN) ctxt_entry[40] not present
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
addr 2cfff9000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
(XEN) print_vtd_entries: iommu = ffff83013ff7b130 bdf = 5:8.0 gmfn =
2cfff9
(XEN) root_entry = ffff83013ff37000
(XEN) root_entry[5] = 13cf13001
(XEN) context = ffff83013cf13000
(XEN) context[40] = 0_0
(XEN) ctxt_entry[40] not present
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
addr 2ced30000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
(XEN) print_vtd_entries: iommu = ffff83013ff7b130 bdf = 5:8.0 gmfn =
2ced30
(XEN) root_entry = ffff83013ff37000
(XEN) root_entry[5] = 13cf13001
(XEN) context = ffff83013cf13000
(XEN) context[40] = 0_0
(XEN) ctxt_entry[40] not present
calling wait_scan_init+0x0/0x12 [scsi_wait_scan] @ 1132
initcall wait_scan_init+0x0/0x12 [scsi_wait_scan] returned 0 after 3
usecs
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
addr 2cf14b000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
(XEN) print_vtd_entries: iommu = ffff83013ff7b130 bdf = 5:8.0 gmfn =
2cf14b
(XEN) root_entry = ffff83013ff37000
(XEN) root_entry[5] = 13cf13001
(XEN) context = ffff83013cf13000
(XEN) context[40] = 0_0
(XEN) ctxt_entry[40] not present
On Sat, 2010-05-29 at 18:20 +0300, Pasi Kärkkäinen wrote:
> On Sat, May 29, 2010 at 07:31:17AM -0700, M. Nunberg wrote:
> > I've been trying to get VT-D working wiht xen for quite some time, since
> > 3.4.2, and I've always had issues with my RAID controller not working
> > properly when iommu is not disabled in Xen:
> >
> > lspci outpuut for the card:
>
> <snip>
>
> >
> > I am using a Supermicro X8DALi motherboard with a 5500 chipset.
> >
> > Whenever I try to access the device the Xen console spits out something
> > like this:
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 204865000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 204865
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> >
> > reads are partially succcessful, but I am getting seek errors at times,
> > filesystems will mount properly but I cannot use any of them properly..
> >
> >
> > The actual kernel output varies, sometimes i get EINVAL when I try to
> > read from the filesystem, sometimes it simply refuses to at all
> > recognize the disk altogether, and other times it will hang the entire
> > system, including the hypervisor itself.
> > I've tried booting the hypervisor with x2apic disabled, but to no
> > effect. I've also tried with the latest xen-4.0-testing (4.0.1), buut
> > same issue and same outpuut
> >
> > A quick google turns up a thread, from this mailing list, with a
> > different RAID card, but the kernel output is similar.. e.g.
> >
> > scsi scan: INQUIRY result too short (5), using 36
> >
> > http://lists.xensource.com/archives/html/xen-users/2010-04/msg00535.html
> >
> > The full xen log is below
> >
>
> Did you use the latest pvops dom0 kernel from xen/stable-2.6.32.x branch?
> Could you also post the full serial log _with_ the dom0 kernel messages?
>
> .. since the problem gets triggered by the dom0 kernel..
>
> -- Pasi
>
>
> >
> >
> > L __ __ _ _ ___
> > ___
> > \ \/ /___ _ __ | || | / _ \ / _ \ 0x146000>, shtab=0x3a2078,
> > entry=0x100000
> > \ // _ \ '_ \ | || |_| | | | | |
> > |
> > / \ __/ | | | |__ _| |_| | |_| |apper/OS-root ro nomodeset
> > console=tty0 r
> > /_/\_\___|_| |_| |
> > _|(_)___(_)___/
> > 020
> > bytes]
> > (XEN) Xen version 4.0.0 (mordy@) (gcc version 4.3.2 (Debian 4.3.2-1.1) )
> > Fri May 21 07:50:16 PDT 2010boot-module
> > @
> > (XEN) Latest ChangeSet:
> > unavailable
> > (XEN) Console output is
> > synchronous.
> > (XEN) Command line: iommu=verbose loglvl=all guest_loglvl=all
> > sync_console console_to_rint com1=115200,8n1
> > console=com1
> > (XEN) Video
> > information:
> > (XEN) VGA is text mode 80x25, font
> > 8x16
> > (XEN) VBE/DDC methods: none; EDID transfer time: 0
> > seconds
> > (XEN) EDID info not retrieved because no DDC retrieval method
> > detected
> > (XEN) Disc information:
> > (XEN) Found 1 MBR signatures
> > (XEN) Found 1 EDD information structures
> > (XEN) Xen-e820 RAM map:
> > (XEN) 0000000000000000 - 000000000009a000 (usable)
> > (XEN) 000000000009a000 - 00000000000a0000 (reserved)
> > (XEN) 00000000000e0000 - 0000000000100000 (reserved)
> > (XEN) 0000000000100000 - 00000000bf760000 (usable)
> > (XEN) 00000000bf76e000 - 00000000bf770000 type 9
> > (XEN) 00000000bf770000 - 00000000bf77e000 (ACPI data)
> > (XEN) 00000000bf77e000 - 00000000bf7d0000 (ACPI NVS)
> > (XEN) 00000000bf7d0000 - 00000000bf7e0000 (reserved)
> > (XEN) 00000000bf7ec000 - 00000000c0000000 (reserved)
> > (XEN) 00000000fee00000 - 00000000fee01000 (reserved)
> > (XEN) 00000000ffc00000 - 0000000100000000 (reserved)
> > (XEN) 0000000100000000 - 0000000340000000 (usable)
> > (XEN) ACPI: RSDP 000F9E10, 0024 (r2 ACPIAM)
> > (XEN) ACPI: XSDT BF770100, 0094 (r1 NEC 20090424 MSFT
> > 97)
> > (XEN) ACPI: FACP BF770290, 00F4 (r4 042409 FACP1917 20090424 MSFT
> > 97)
> > (XEN) ACPI: DSDT BF770670, 5BFB (r2 10601 10601000 0 INTL
> > 20051117)
> > (XEN) ACPI: FACS BF77E000, 0040
> > (XEN) ACPI: APIC BF770390, 00D2 (r2 042409 APIC1917 20090424 MSFT
> > 97)
> > (XEN) ACPI: MCFG BF770470, 003C (r1 042409 OEMMCFG 20090424 MSFT
> > 97)
> > (XEN) ACPI: SLIC BF7704B0, 0176 (r1 NEC 20090424 MSFT
> > 97)
> > (XEN) ACPI: ERST BF770630, 0040 (r1 042409 WHEA1917 20090424 MSFT
> > 97)
> > (XEN) ACPI: OEMB BF77E040, 007B (r1 042409 OEMB1917 20090424 MSFT
> > 97)
> > (XEN) ACPI: SRAT BF77A670, 01D0 (r1 042409 OEMSRAT 1 INTL
> > 1)
> > (XEN) ACPI: HPET BF77A840, 0038 (r1 042409 OEMHPET 20090424 MSFT
> > 97)
> > (XEN) ACPI: DMAR BF77E0C0, 0118 (r1 AMI OEMDMAR 1 MSFT
> > 97)
> > (XEN) ACPI: SSDT BF781DF0, 0363 (r1 DpgPmm CpuPm 12 INTL
> > 20051117)
> > (XEN) ACPI: EINJ BF77A880, 0130 (r1 AMIER AMI_EINJ 20090424 MSFT
> > 97)
> > (XEN) ACPI: BERT BF77AA10, 0030 (r1 AMIER AMI_BERT 20090424 MSFT
> > 97)
> > (XEN) ACPI: ERST BF77AA40, 01B0 (r1 AMIER AMI_ERST 20090424 MSFT
> > 97)
> > (XEN) ACPI: HEST BF77ABF0, 00A8 (r1 AMIER AMI_HEST 20090424 MSFT
> > 97)
> > (XEN) System RAM: 12045MB (12334808kB)
> > (XEN) SRAT: PXM 0 -> APIC 0 -> Node 0
> > (XEN) SRAT: PXM 0 -> APIC 2 -> Node 0
> > (XEN) SRAT: PXM 0 -> APIC 4 -> Node 0
> > (XEN) SRAT: PXM 0 -> APIC 6 -> Node 0
> > (XEN) SRAT: PXM 0 -> APIC 1 -> Node 0
> > (XEN) SRAT: PXM 0 -> APIC 3 -> Node 0
> > (XEN) SRAT: PXM 0 -> APIC 5 -> Node 0
> > (XEN) SRAT: PXM 0 -> APIC 7 -> Node 0
> > (XEN) SRAT: PXM 1 -> APIC 16 -> Node 1
> > (XEN) SRAT: PXM 1 -> APIC 18 -> Node 1
> > (XEN) SRAT: PXM 1 -> APIC 20 -> Node 1
> > (XEN) SRAT: PXM 1 -> APIC 22 -> Node 1
> > (XEN) SRAT: PXM 1 -> APIC 17 -> Node 1
> > (XEN) SRAT: PXM 1 -> APIC 19 -> Node 1
> > (XEN) SRAT: PXM 1 -> APIC 21 -> Node 1
> > (XEN) SRAT: PXM 1 -> APIC 23 -> Node 1
> > (XEN) SRAT: Node 0 PXM 0 0-a0000
> > (XEN) SRAT: Node 0 PXM 0 100000-c0000000
> > (XEN) SRAT: Node 0 PXM 0 100000000-1c0000000
> > (XEN) SRAT: Node 1 PXM 1 1c0000000-340000000
> > (XEN) NUMA: Allocated memnodemap from 33fdfb000 - 33fdff000
> > (XEN) NUMA: Using 8 for the hash shift.
> > (XEN) Domain heap initialised DMA width 30 bits
> > (XEN) found SMP MP-table at 000ff780
> > (XEN) DMI present.
> > (XEN) Using APIC driver default
> > (XEN) ACPI: PM-Timer IO Port: 0x808
> > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
> > (XEN) ACPI: wakeup_vec[bf77e00c], vec_size[20]
> > (XEN) ACPI: Local APIC address 0xfee00000
> > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> > (XEN) Processor #0 7:10 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x10] enabled)
> > (XEN) Processor #16 7:10 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
> > (XEN) Processor #2 7:10 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled)
> > (XEN) Processor #18 7:10 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
> > (XEN) Processor #4 7:10 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
> > (XEN) Processor #20 7:10 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
> > (XEN) Processor #6 7:10 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled)
> > (XEN) Processor #22 7:10 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled)
> > (XEN) Processor #1 7:10 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
> > (XEN) Processor #17 7:10 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x03] enabled)
> > (XEN) Processor #3 7:10 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x13] enabled)
> > (XEN) Processor #19 7:10 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x05] enabled)
> > (XEN) Processor #5 7:10 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x15] enabled)
> > (XEN) Processor #21 7:10 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x07] enabled)
> > (XEN) Processor #7 7:10 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x17] enabled)
> > (XEN) Processor #23 7:10 APIC version 21
> > (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
> > (XEN) Overriding APIC driver with bigsmp
> > (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> > (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
> > (XEN) ACPI: IRQ0 used by override.
> > (XEN) ACPI: IRQ2 used by override.
> > (XEN) ACPI: IRQ9 used by override.
> > (XEN) Enabling APIC mode: Phys. Using 1 I/O APICs
> > (XEN) ACPI: HPET id: 0xffffffff base: 0xfed00000
> > (XEN) [VT-D]dmar.c:679: Host address width 40
> > (XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD:
> > (XEN) [VT-D]dmar.c:398: dmaru->address = fbffe000
> > (XEN) [VT-D]dmar.c:340: IOAPIC: f0:1f.7
> > (XEN) [VT-D]dmar.c:411: flags: INCLUDE_ALL
> > (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
> > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0
> > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.1
> > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.2
> > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.7
> > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.0
> > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.1
> > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.2
> > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.7
> > (XEN) [VT-D]dmar.c:571: RMRR region: base_addr ec000 end_address effff
> > (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
> > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0
> > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.1
> > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.2
> > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.7
> > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.0
> > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.1
> > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.2
> > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.7
> > (XEN) [VT-D]dmar.c:571: RMRR region: base_addr bf7ec000 end_address
> > bf7fffff
> > (XEN) [VT-D]dmar.c:704: found ACPI_DMAR_ATSR:
> > (XEN) [VT-D]dmar.c:599: atsru->all_ports: 0
> > (XEN) [VT-D]dmar.c:320: bridge: 0:1.0 start = 0 sec = 1 sub = 1
> > (XEN) [VT-D]dmar.c:320: bridge: 0:3.0 start = 0 sec = 2 sub = 2
> > (XEN) [VT-D]dmar.c:320: bridge: 0:7.0 start = 0 sec = 3 sub = 3
> > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
> > (XEN) PCI: Not using MMCONFIG.
> > (XEN) Using ACPI (MADT) for SMP configuration information
> > (XEN) Using scheduler: SMP Credit Scheduler (credit)
> > (XEN) Detected 2266.790 MHz processor.
> > (XEN) Initing memory sharing.
> > (XEN) VMX: Supported advanced features:
> > (XEN) - APIC MMIO access virtualisation
> > (XEN) - APIC TPR shadow
> > (XEN) - Extended Page Tables (EPT)
> > (XEN) - Virtual-Processor Identifiers (VPID)
> > (XEN) - Virtual NMI
> > (XEN) - MSR direct-access bitmap
> > (XEN) HVM: ASIDs enabled.
> > (XEN) HVM: VMX enabled
> > (XEN) HVM: Hardware Assisted Paging detected.
> > (XEN) Intel machine check reporting enabled
> > (XEN) [VT-D]iommu.c:1078: drhd->address = fbffe000 iommu->reg =
> > ffff82c3fff57000
> > (XEN) [VT-D]iommu.c:1080: cap = c90780106f0462 ecap = f0207e
> > (XEN) Intel VT-d Snoop Control not supported.
> > (XEN) Intel VT-d DMA Passthrough not supported.
> > (XEN) Intel VT-d Queued Invalidation supported.
> > (XEN) Intel VT-d Interrupt Remapping supported.
> > (XEN) I/O virtualisation enabled
> > (XEN) I/O virtualisation for PV guests disabled
> > (XEN) Total of 16 processors activated.
> > (XEN) ENABLING IO-APIC IRQs
> > (XEN) -> Using new ACK method
> > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
> > (XEN) TSC is reliable, synchronization unnecessary
> > (XEN) Platform timer is 14.318MHz HPET
> > ?(XEN) Allocated console ring of 128 KiB.
> > (XEN) microcode.c:73:d32767 microcode: CPU1 resumed
> > (XEN) microcode.c:73:d32767 microcode: CPU9 resumed
> > (XEN) microcode.c:73:d32767 microcode: CPU14 resumed
> > (XEN) microcode.c:73:d32767 microcode: CPU6 resumed
> > (XEN) microcode.c:73:d32767 microcode: CPU3 resumed
> > (XEN) microcode.c:73:d32767 microcode: CPU11 resumed
> > (XEN) microcode.c:73:d32767 microcode: CPU8 resumed
> > (XEN) microcode.c:73:d32767 microcode: CPU7 resumed
> > (XEN) microcode.c:73:d32767 microcode: CPU15 resumed
> > (XEN) microcode.c:73:d32767 microcode: CPU2 resumed
> > (XEN) microcode.c:73:d32767 microcode: CPU5 resumed
> > (XEN) microcode.c:73:d32767 microcode: CPU13 resumed
> > (XEN) microcode.c:73:d32767 microcode: CPU4 resumed
> > (XEN) microcode.c:73:d32767 microcode: CPU10 resumed
> > (XEN) Brought up 16 CPUs
> > (XEN) microcode.c:73:d32767 microcode: CPU12 resumed
> > (XEN) Turbo Mode detected!
> > (XEN) HPET's MSI mode hasn't been supported when Interrupt Remapping is
> > enabled.
> > (XEN) ACPI sleep modes: S3
> > (XEN) mcheck_poll: Machine check polling timer started.
> > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:0.0
> > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.0
> > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.1
> > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.2
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:14.3
> > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.0
> > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.1
> > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.2
> > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.3
> > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.4
> > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.5
> > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.6
> > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.7
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.0
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.1
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.2
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.7
> > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:1b.0
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.0
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.1
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.2
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.7
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.0
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.2
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.3
> > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 1:0.0
> > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 3:0.0
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 5:e.0
> > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 7:0.0
> > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 8:0.0
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:0.0
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:0.1
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:2.0
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:2.1
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:2.4
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:2.5
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:3.0
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:3.1
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:3.2
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:3.4
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:4.0
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:4.1
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:4.2
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:4.3
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:5.0
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:5.1
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:5.2
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:5.3
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:6.0
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:6.1
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:6.2
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:6.3
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:0.0
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:0.1
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.0
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.1
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.4
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.5
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.0
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.1
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.2
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.4
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.0
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.1
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.2
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.3
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.0
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.1
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.2
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.3
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:6.0
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:6.1
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:6.2
> > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:6.3
> > (XEN) [VT-D]iommu.c:695: iommu_enable_translation: iommu->reg =
> > ffff82c3fff57000
> > (XEN) *** LOADING DOMAIN 0 ***
> > (XEN) Xen kernel: 64-bit, lsb, compat32
> > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x26b6000
> > (XEN) PHYSICAL MEMORY ARRANGEMENT:
> > (XEN) Dom0 alloc.: 0000000100000000->0000000120000000 (2937045 pages
> > to be allocated)
> > (XEN) VIRTUAL MEMORY ARRANGEMENT:
> > (XEN) Loaded kernel: ffffffff81000000->ffffffff826b6000
> > (XEN) Init. ramdisk: ffffffff826b6000->ffffffff8f7d7600
> > (XEN) Phys-Mach map: ffffffff8f7d8000->ffffffff90f406a8
> > (XEN) Start info: ffffffff90f41000->ffffffff90f414b4
> > (XEN) Page tables: ffffffff90f42000->ffffffff90fcf000
> > (XEN) Boot stack: ffffffff90fcf000->ffffffff90fd0000
> > (XEN) TOTAL: ffffffff80000000->ffffffff91400000
> > (XEN) ENTRY ADDRESS: ffffffff819be200
> > (XEN) Dom0 has maximum 16 VCPUs
> > (XEN) Scrubbing Free RAM: .done.
> > (XEN) Xen trace buffers: disabled
> > (XEN) Std. Loglevel: All
> > (XEN) Guest Loglevel: All
> > (XEN) **********************************************
> > (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
> > (XEN) ******* This option is intended to aid debugging of Xen by
> > ensuring
> > (XEN) ******* that all output is synchronously delivered on the serial
> > line.
> > (XEN) ******* However it can introduce SIGNIFICANT latencies and affect
> > (XEN) ******* timekeeping. It is NOT recommended for production use!
> > (XEN) **********************************************
> > (XEN) 3... 2... 1...
> > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
> > input to Xen)
> > (XEN) Freed 164kB init memory.
> > mapping kernel into physical memory
> > Xen: setup ISA identity maps
> > about to get started...
> > (XEN) PCI add device 00:00.0
> > (XEN) PCI add device 00:01.0
> > (XEN) PCI add device 00:03.0
> > (XEN) PCI add device 00:07.0
> > (XEN) PCI add device 00:14.0
> > (XEN) PCI add device 00:14.1
> > (XEN) PCI add device 00:14.2
> > (XEN) PCI add device 00:14.3
> > (XEN) PCI add device 00:16.0
> > (XEN) PCI add device 00:16.1
> > (XEN) PCI add device 00:16.2
> > (XEN) PCI add device 00:16.3
> > (XEN) PCI add device 00:16.4
> > (XEN) PCI add device 00:16.5
> > (XEN) PCI add device 00:16.6
> > (XEN) PCI add device 00:16.7
> > (XEN) PCI add device 00:1a.0
> > (XEN) PCI add device 00:1a.1
> > (XEN) PCI add device 00:1a.2
> > (XEN) PCI add device 00:1a.7
> > (XEN) PCI add device 00:1b.0
> > (XEN) PCI add device 00:1c.0
> > (XEN) PCI add device 00:1c.4
> > (XEN) PCI add device 00:1c.5
> > (XEN) PCI add device 00:1d.0
> > (XEN) PCI add device 00:1d.1
> > (XEN) PCI add device 00:1d.2
> > (XEN) PCI add device 00:1d.7
> > (XEN) PCI add device 00:1e.0
> > (XEN) PCI add device 00:1f.0
> > (XEN) PCI add device 00:1f.2
> > (XEN) PCI add device 00:1f.3
> > (XEN) PCI add device 01:00.0
> > (XEN) PCI add device 03:00.0
> > (XEN) PCI add device 04:00.0
> > (XEN) PCI add device 04:00.2
> > (XEN) PCI add device 05:0e.0
> > (XEN) PCI add device 07:00.0
> > (XEN) PCI add device 08:00.0
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-1 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-1 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-1 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-1 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-1 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-1 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-1 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-1 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-1 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-1 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-1 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-1 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-1 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-1 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-1 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-1 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
> > (XEN) Monitor-Mwait will be used to enter C-3 state
> > (XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'.
> > (XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'.
> > (XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'.
> > (XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'.
> > (XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'.
> > (XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'.
> > (XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'.
> > (XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'.
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 203a09000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 203a09
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 203eba000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 203eba
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 204e11000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 204e11
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2061e2000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2061e2
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 205043000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 205043
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 20552b000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 20552b
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 205708000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 205708
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2060c0000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2060c0
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 206591000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 206591
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 204353000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 204353
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2061f2000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2061f2
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 204306000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 204306
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 205f6b000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 205f6b
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 205665000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 205665
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2045a0000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2045a0
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 205669000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 205669
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2042c6000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2042c6
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2061fe000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2061fe
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 20560a000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 20560a
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 206003000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 206003
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 20583e000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 20583e
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 205615000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 205615
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 204265000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 204265
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 207498000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 207498
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2049d1000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2049d1
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 20488e000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 20488e
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 205495000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 205495
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2072d8000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2072d8
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2055ae000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2055ae
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 205544000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 205544
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 204865000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 204865
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2074be000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2074be
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> >
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 204865000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 204865
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2074be000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2074be
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> >
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 204865000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 204865
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2074be000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2074be
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> >
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 204865000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 204865
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2074be000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2074be
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> >
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 204865000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 204865
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2074be000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2074be
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> >
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 204865000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 204865
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2074be000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2074be
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> >
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 204865000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 204865
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2074be000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2074be
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> >
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 204865000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 204865
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2074be000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2074be
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> >
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 204865000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 204865
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2074be000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2074be
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> >
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 204865000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 204865
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2074be000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2074be
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> >
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 204865000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 204865
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault
> > addr 2074be000, iommu reg = ffff82c3fff57000
> > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear
> > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn =
> > 2074be
> > (XEN) root_entry = ffff83013ff37000
> > (XEN) root_entry[5] = 13cf12001
> > (XEN) context = ffff83013cf12000
> > (XEN) context[40] = 0_0
> > (XEN) ctxt_entry[40] not present
> >
> >
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home