# ##### # # Serial console trace output for boot of pvops dom0 Linux kernel atop baremetal, # using the following entry in /etc/grub.conf: # # # title Fedora-12 (2.6.31.12) Baremetal dom0 boot # root (hd0,0) # kernel /vmlinuz-2.6.31.12 ro root=UUID=edbcbc29-f3e4-4985-80c1-3c3b0ce24d17 LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us console=tty0 console=ttyS0,115200 debug initcall_debug apic=debug # initrd /initramfs-2.6.31.12.img # # System: Dell T7500 # Date: 03/17/2010 # # ##### [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31.12 (root@truckee) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #2 SMP Wed Mar 10 14:01:22 MST 2010 [ 0.000000] Command line: ro root=UUID=edbcbc29-f3e4-4985-80c1-3c3b0ce24d17 LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us console=tty0 console=ttyS0,115200 debug initcall_debug apic=debug [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dbdf9c00 (usable) [ 0.000000] BIOS-e820: 00000000dbdf9c00 - 00000000dbe4bc00 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dbe4bc00 - 00000000dbe4dc00 (ACPI data) [ 0.000000] BIOS-e820: 00000000dbe4dc00 - 00000000dc000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fd000000 (reserved) [ 0.000000] BIOS-e820: 00000000fe000000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 00000001a4000000 (usable) [ 0.000000] DMI 2.5 present. [ 0.000000] last_pfn = 0x1a4000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00DBF00000 mask FFFFF00000 uncachable [ 0.000000] 1 base 00DC000000 mask FFFC000000 uncachable [ 0.000000] 2 base 00E0000000 mask FFE0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xdbdf9 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009e400 (usable) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000dbdf9c00 (usable) [ 0.000000] modified: 00000000dbdf9c00 - 00000000dbe4bc00 (ACPI NVS) [ 0.000000] modified: 00000000dbe4bc00 - 00000000dbe4dc00 (ACPI data) [ 0.000000] modified: 00000000dbe4dc00 - 00000000dc000000 (reserved) [ 0.000000] modified: 00000000f8000000 - 00000000fd000000 (reserved) [ 0.000000] modified: 00000000fe000000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 00000001a4000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dbdf9000 [ 0.000000] 0000000000 - 00dbc00000 page 2M [ 0.000000] 00dbc00000 - 00dbdf9000 page 4k [ 0.000000] kernel direct mapping tables up to dbdf9000 @ 8000-e000 [ 0.000000] init_memory_mapping: 0000000100000000-00000001a4000000 [ 0.000000] 0100000000 - 01a4000000 page 2M [ 0.000000] kernel direct mapping tables up to 1a4000000 @ c000-14000 [ 0.000000] RAMDISK: 37a30000 - 37fefb03 [ 0.000000] ACPI: RSDP 00000000000febf0 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000000fcc3c 00084 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: FACP 00000000000fcd34 000F4 (v03 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: DSDT 00000000ffe9a4ee 05732 (v01 DELL dt_ex 00001000 INTL 20050624) [ 0.000000] ACPI: FACS 00000000dbdf9c00 00040 [ 0.000000] ACPI: SSDT 00000000ffe9fd41 000AC (v01 DELL st_ex 00001000 INTL 20050624) [ 0.000000] ACPI: APIC 00000000000fce28 0016A (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: BOOT 00000000000fcf92 00028 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: ASF! 00000000000fcfba 00096 (v32 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: MCFG 00000000000fd050 0003E (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: HPET 00000000000fd08e 00038 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: TCPA 00000000000fd2ea 00032 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: DMAR 00000000000fd31c 000F8 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: SLIC 00000000000fd0c6 00176 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: _RAT 00000000000fdece 00030 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: SSDT 00000000dbe4dc00 010F4 (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 01a4000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001b4ef34] TEXT DATA BSS ==> [0001000000 - 0001b4ef34] [ 0.000000] #3 [0037a30000 - 0037fefb03] RAMDISK ==> [0037a30000 - 0037fefb03] [ 0.000000] #4 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 - 0000100000] [ 0.000000] #5 [0001b4f000 - 0001b4f184] BRK ==> [0001b4f000 - 0001b4f184] [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #7 [000000c000 - 000000f000] PGTABLE ==> [000000c000 - 000000f000] [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] Scan SMP from ffff88000009e400 for 1024 bytes. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x001a4000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000dbdf9 [ 0.000000] 0: 0x00100000 -> 0x001a4000 [ 0.000000] On node 0 totalpages: 1572242 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 107 pages reserved [ 0.000000] DMA zone: 3830 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 882225 pages, LIFO batch:31 [ 0.000000] Normal zone: 9184 pages used for memmap [ 0.000000] Normal zone: 662560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec88000] gsi_base[48]) [ 0.000000] IOAPIC[2]: apic_id 10, version 32, address 0xfec88000, GSI 48-71 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] 32 Processors exceeds NR_CPUS limit of 8 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] mapped APIC to ffffffffff5fb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec00000) [ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec80000) [ 0.000000] mapped IOAPIC to ffffffffff5f8000 (fec88000) [ 0.000000] nr_irqs_gsi: 72 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dbdf9000 - 00000000dbdfa000 [ 0.000000] PM: Registered nosave memory: 00000000dbdfa000 - 00000000dbe4b000 [ 0.000000] PM: Registered nosave memory: 00000000dbe4b000 - 00000000dbe4c000 [ 0.000000] PM: Registered nosave memory: 00000000dbe4c000 - 00000000dbe4d000 [ 0.000000] PM: Registered nosave memory: 00000000dbe4d000 - 00000000dbe4e000 [ 0.000000] PM: Registered nosave memory: 00000000dbe4e000 - 00000000dc000000 [ 0.000000] PM: Registered nosave memory: 00000000dc000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fd000000 [ 0.000000] PM: Registered nosave memory: 00000000fd000000 - 00000000fe000000 [ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ffb00000 [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at dc000000 (gap: dc000000:1c000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages at ffff880028034000, static data 88096 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1548615 [ 0.000000] Kernel command line: ro root=UUID=edbcbc29-f3e4-4985-80c1-3c3b0ce24d17 LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us console=tty0 console=ttyS0,115200 debug initcall_debug apic=debug [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 6103324k/6881280k available (5517k kernel code, 592312k absent, 184752k reserved, 3658k data, 520k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:1288 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2128.256 MHz processor. [ 0.005778] Console: colour VGA+ 80x25 [ 0.005780] console [tty0] enabled [ 0.056166] console [ttyS0] enabled [ 1.342490] hpet clockevent registered [ 1.346432] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 1.353685] Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.51 BogoMIPS (lpj=2128256) [ 1.364712] Security Framework initialized [ 1.369006] SELinux: Initializing. [ 1.372695] SELinux: Starting in permissive mode [ 1.377598] Mount-cache hash table entries: 256 [ 1.382446] Initializing cgroup subsys ns [ 1.386656] Initializing cgroup subsys cpuacct [ 1.391297] Initializing cgroup subsys freezer [ 1.395947] CPU: Physical Processor ID: 0 [ 1.400151] CPU: Processor Core ID: 0 [ 1.404012] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.408968] CPU: L2 cache: 256K [ 1.412305] CPU: L3 cache: 4096K [ 1.415731] mce: CPU supports 9 MCE banks [ 1.419947] using mwait in idle threads. [ 1.424065] Performance Counters: Nehalem/Corei7 events, Intel PMU driver. [ 1.431248] ... version: 3 [ 1.435541] ... bit width: 48 [ 1.439918] ... generic counters: 4 [ 1.444209] ... value mask: 0000ffffffffffff [ 1.449801] ... max period: 000000007fffffff [ 1.455392] ... fixed-purpose counters: 3 [ 1.459683] ... counter mask: 000000070000000f [ 1.466090] ACPI: Core revision 20090521 [ 1.729201] Setting APIC routing to flat [ 1.733333] Getting VERSION: 60015 [ 1.736935] Getting VERSION: 60015 [ 1.740534] Getting ID: 0 [ 1.743354] Getting ID: 0 [ 1.746174] enabled ExtINT on CPU#0 [ 1.750337] ESR value before enabling vector: 0x00000040 after: 0x00000000 [ 1.757491] ENABLING IO-APIC IRQs [ 1.761004] init IO_APIC IRQs [ 1.764169] 8-0 (apicid-pin) not connected [ 1.768667] IOAPIC[0]: Set routing entry (8-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 1.776332] IOAPIC[0]: Set routing entry (8-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) [ 1.783996] IOAPIC[0]: Set routing entry (8-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 1.791655] IOAPIC[0]: Set routing entry (8-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 1.799314] IOAPIC[0]: Set routing entry (8-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) [ 1.806971] IOAPIC[0]: Set routing entry (8-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) [ 1.814631] IOAPIC[0]: Set routing entry (8-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 1.822288] IOAPIC[0]: Set routing entry (8-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 1.829948] IOAPIC[0]: Set routing entry (8-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) [ 1.837608] IOAPIC[0]: Set routing entry (8-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) [ 1.845440] IOAPIC[0]: Set routing entry (8-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) [ 1.853272] IOAPIC[0]: Set routing entry (8-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 1.861104] IOAPIC[0]: Set routing entry (8-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 1.868936] IOAPIC[0]: Set routing entry (8-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) [ 1.876767] IOAPIC[0]: Set routing entry (8-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) [ 1.884598] 8-16 8-17 8-18 8-19 8-20 8-21 8-22 8-23 (apicid-pin) not connected [ 1.892819] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.909015] CPU0: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz stepping 05 [ 1.916446] Using local APIC timer interrupts. [ 1.916446] calibrating APIC timer ... [ 2.026198] ... lapic delta = 831240 [ 2.029966] ... PM-Timer delta = 357950 [ 2.038079] ... PM-Timer result ok [ 2.041672] ..... delta 831240 [ 2.044918] ..... mult: 35706913 [ 2.048338] ..... calibration result: 132998 [ 2.052797] ..... CPU clock speed is 2127.0973 MHz. [ 2.057864] ..... host bus clock speed is 132.0998 MHz. [ 2.063286] calling migration_init+0x0/0x5b @ 1 [ 2.068113] initcall migration_init+0x0/0x5b returned 1 after 0 usecs [ 2.074745] initcall migration_init+0x0/0x5b returned with error code 1 [ 2.081635] calling spawn_ksoftirqd+0x0/0x59 @ 1 [ 2.086539] initcall spawn_ksoftirqd+0x0/0x59 returned 0 after 0 usecs [ 2.093257] calling init_call_single_data+0x0/0x89 @ 1 [ 2.098673] initcall init_call_single_data+0x0/0x89 returned 0 after 0 usecs [ 2.105911] calling relay_init+0x0/0x14 @ 1 [ 2.110374] initcall relay_init+0x0/0x14 returned 0 after 0 usecs [ 2.116658] calling tracer_alloc_buffers+0x0/0x173 @ 1 [ 2.122093] initcall tracer_alloc_buffers+0x0/0x173 returned 0 after 0 usecs [ 2.129330] calling init_trace_printk+0x0/0x12 @ 1 [ 2.134399] initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs [ 2.141322] Booting processor 1 APIC 0x2 ip 0x6000 [ 2.156663] Initializing CPU#1 [ 2.157409] masked ExtINT on CPU#1 [ 2.217189] Calibrating delay using timer specific routine.. 4255.26 BogoMIPS (lpj=2127632) [ 2.217196] CPU: Physical Processor ID: 0 [ 2.217197] CPU: Processor Core ID: 1 [ 2.217200] CPU: L1 I cache: 32K, L1 D cache: 32K [ 2.217202] CPU: L2 cache: 256K [ 2.217203] CPU: L3 cache: 4096K [ 2.217206] mce: CPU supports 9 MCE banks [ 2.217896] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 2.218637] CPU1: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz stepping 05 [ 2.272726] Skipping synchronization checks as TSC is reliable. [ 2.278895] Booting processor 2 APIC 0x4 ip 0x6000 [ 2.294158] Initializing CPU#2 [ 2.294982] masked ExtINT on CPU#2 [ 2.354106] Calibrating delay using timer specific routine.. 4255.26 BogoMIPS (lpj=2127634) [ 2.354114] CPU: Physical Processor ID: 0 [ 2.354115] CPU: Processor Core ID: 2 [ 2.354118] CPU: L1 I cache: 32K, L1 D cache: 32K [ 2.354119] CPU: L2 cache: 256K [ 2.354120] CPU: L3 cache: 4096K [ 2.354123] mce: CPU supports 9 MCE banks [ 2.354816] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 2.355614] CPU2: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz stepping 05 [ 2.409706] Skipping synchronization checks as TSC is reliable. [ 2.415875] Booting processor 3 APIC 0x6 ip 0x6000 [ 2.431136] Initializing CPU#3 [ 2.431960] masked ExtINT on CPU#3 [ 2.491024] Calibrating delay using timer specific routine.. 4255.26 BogoMIPS (lpj=2127630) [ 2.491031] CPU: Physical Processor ID: 0 [ 2.491032] CPU: Processor Core ID: 3 [ 2.491035] CPU: L1 I cache: 32K, L1 D cache: 32K [ 2.491037] CPU: L2 cache: 256K [ 2.491038] CPU: L3 cache: 4096K [ 2.491041] mce: CPU supports 9 MCE banks [ 2.491734] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 2.492493] CPU3: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz stepping 05 [ 2.546587] Skipping synchronization checks as TSC is reliable. [ 2.552706] Brought up 4 CPUs [ 2.555868] Total of 4 processors activated (17022.30 BogoMIPS). [ 2.562376] calling init_mmap_min_addr+0x0/0x26 @ 1 [ 2.567536] initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs [ 2.574516] calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1 [ 2.581324] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs [ 2.590109] calling net_ns_init+0x0/0xed @ 1 [ 2.594681] initcall net_ns_init+0x0/0xed returned 0 after 0 usecs [ 2.601056] calling e820_mark_nvs_memory+0x0/0x40 @ 1 [ 2.606398] initcall e820_mark_nvs_memory+0x0/0x40 returned 0 after 0 usecs [ 2.613548] calling cpufreq_tsc+0x0/0x28 @ 1 [ 2.618098] initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs [ 2.624470] calling pci_reboot_init+0x0/0x14 @ 1 [ 2.629369] initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs [ 2.636088] calling init_lapic_sysfs+0x0/0x2d @ 1 [ 2.641112] initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 usecs [ 2.647918] calling print_banner+0x0/0xe @ 1 [ 2.652467] Booting paravirtualized kernel on bare hardware [ 2.658231] initcall print_banner+0x0/0xe returned 0 after 976 usecs [ 2.664777] calling alloc_frozen_cpus+0x0/0x8 @ 1 [ 2.669760] initcall alloc_frozen_cpus+0x0/0x8 returned 0 after 0 usecs [ 2.676564] calling sysctl_init+0x0/0x32 @ 1 [ 2.681213] initcall sysctl_init+0x0/0x32 returned 0 after 0 usecs [ 2.687584] calling ksysfs_init+0x0/0xc0 @ 1 [ 2.692139] initcall ksysfs_init+0x0/0xc0 returned 0 after 0 usecs [ 2.698509] calling async_init+0x0/0x60 @ 1 [ 2.702985] initcall async_init+0x0/0x60 returned 0 after 0 usecs [ 2.709270] calling init_jiffies_clocksource+0x0/0x12 @ 1 [ 2.714947] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs [ 2.722602] calling pm_init+0x0/0x34 @ 1 [ 2.726808] initcall pm_init+0x0/0x34 returned 0 after 0 usecs [ 2.732833] calling pm_disk_init+0x0/0x19 @ 1 [ 2.737468] initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs [ 2.743927] calling swsusp_header_init+0x0/0x2c @ 1 [ 2.749082] initcall swsusp_header_init+0x0/0x2c returned 0 after 0 usecs [ 2.756060] calling filelock_init+0x0/0x2e @ 1 [ 2.760786] initcall filelock_init+0x0/0x2e returned 0 after 0 usecs [ 2.767330] calling init_misc_binfmt+0x0/0x41 @ 1 [ 2.772315] initcall init_misc_binfmt+0x0/0x41 returned 0 after 0 usecs [ 2.779119] calling init_script_binfmt+0x0/0x14 @ 1 [ 2.784275] initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs [ 2.791252] calling init_elf_binfmt+0x0/0x14 @ 1 [ 2.796149] initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs [ 2.802865] calling init_compat_elf_binfmt+0x0/0x14 @ 1 [ 2.808368] initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs [ 2.815692] calling debugfs_init+0x0/0x5c @ 1 [ 2.820329] initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs [ 2.826786] calling random32_init+0x0/0xd8 @ 1 [ 2.831510] initcall random32_init+0x0/0xd8 returned 0 after 0 usecs [ 2.838054] calling gnttab_init+0x0/0x1b4 @ 1 [ 2.842688] initcall gnttab_init+0x0/0x1b4 returned -19 after 0 usecs [ 2.849320] calling early_resume_init+0x0/0x19e @ 1 [ 2.854495] Time: 15:45:14 Date: 03/17/10 [ 2.858786] initcall early_resume_init+0x0/0x19e returned 0 after 976 usecs [ 2.865938] calling cpufreq_core_init+0x0/0x78 @ 1 [ 2.871009] initcall cpufreq_core_init+0x0/0x78 returned 0 after 0 usecs [ 2.877900] calling cpuidle_init+0x0/0x40 @ 1 [ 2.882539] initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs [ 2.888996] calling sock_init+0x0/0x5e @ 1 [ 2.893407] initcall sock_init+0x0/0x5e returned 0 after 0 usecs [ 2.899605] calling net_inuse_init+0x0/0x26 @ 1 [ 2.904418] initcall net_inuse_init+0x0/0x26 returned 0 after 0 usecs [ 2.911049] calling netpoll_init+0x0/0x31 @ 1 [ 2.915685] initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs [ 2.922142] calling netlink_proto_init+0x0/0x143 @ 1 [ 2.927390] NET: Registered protocol family 16 [ 2.932036] initcall netlink_proto_init+0x0/0x143 returned 0 after 976 usecs [ 2.939274] calling bdi_class_init+0x0/0x41 @ 1 [ 2.944120] initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs [ 2.950752] calling kobject_uevent_init+0x0/0x54 @ 1 [ 2.955997] initcall kobject_uevent_init+0x0/0x54 returned 0 after 0 usecs [ 2.963061] calling pcibus_class_init+0x0/0x19 @ 1 [ 2.968156] initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs [ 2.975047] calling pci_driver_init+0x0/0x12 @ 1 [ 2.979972] initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs [ 2.986692] calling backlight_class_init+0x0/0x5d @ 1 [ 2.992043] initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs [ 2.999193] calling video_output_class_init+0x0/0x19 @ 1 [ 3.004805] initcall video_output_class_init+0x0/0x19 returned 0 after 0 usecs [ 3.012376] calling xenbus_probe_init+0x0/0x25a @ 1 [ 3.017532] initcall xenbus_probe_init+0x0/0x25a returned -19 after 0 usecs [ 3.024683] calling tty_class_init+0x0/0x31 @ 1 [ 3.029514] initcall tty_class_init+0x0/0x31 returned 0 after 0 usecs [ 3.036144] calling vtconsole_class_init+0x0/0xc2 @ 1 [ 3.041528] initcall vtconsole_class_init+0x0/0xc2 returned 0 after 0 usecs [ 3.048681] calling i2c_init+0x0/0x67 @ 1 [ 3.053042] initcall i2c_init+0x0/0x67 returned 0 after 0 usecs [ 3.059152] calling amd_postcore_init+0x0/0x77 @ 1 [ 3.064221] initcall amd_postcore_init+0x0/0x77 returned 0 after 0 usecs [ 3.071111] calling arch_kdebugfs_init+0x0/0x235 @ 1 [ 3.076361] initcall arch_kdebugfs_init+0x0/0x235 returned 0 after 0 usecs [ 3.083424] calling mtrr_if_init+0x0/0x61 @ 1 [ 3.088063] initcall mtrr_if_init+0x0/0x61 returned 0 after 0 usecs [ 3.094522] calling ffh_cstate_init+0x0/0x2a @ 1 [ 3.099419] initcall ffh_cstate_init+0x0/0x2a returned 0 after 0 usecs [ 3.106136] calling acpi_pci_init+0x0/0x57 @ 1 [ 3.110858] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 3.118776] ACPI: bus type pci registered [ 3.122978] initcall acpi_pci_init+0x0/0x57 returned 0 after 1953 usecs [ 3.129782] calling register_xen_pci_notifier+0x0/0x24 @ 1 [ 3.135544] initcall register_xen_pci_notifier+0x0/0x24 returned 0 after 0 usecs [ 3.143287] calling setup_vcpu_hotplug_event+0x0/0x22 @ 1 [ 3.148964] initcall setup_vcpu_hotplug_event+0x0/0x22 returned -19 after 0 usecs [ 3.156794] calling dmi_id_init+0x0/0x319 @ 1 [ 3.161496] initcall dmi_id_init+0x0/0x319 returned 0 after 0 usecs [ 3.167955] calling pci_arch_init+0x0/0x60 @ 1 [ 3.172689] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 3.179839] PCI: MCFG area at f8000000 reserved in E820 [ 3.187123] PCI: Using MMCONFIG at f8000000 - fbffffff [ 3.192452] PCI: Using configuration type 1 for base access [ 3.198218] initcall pci_arch_init+0x0/0x60 returned 0 after 5859 usecs [ 3.205021] calling topology_init+0x0/0x40 @ 1 [ 3.209833] initcall topology_init+0x0/0x40 returned 0 after 0 usecs [ 3.220468] calling mtrr_init_finialize+0x0/0x3d @ 1 [ 3.225712] initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs [ 3.232775] calling param_sysfs_init+0x0/0x224 @ 1 [ 3.242832] initcall param_sysfs_init+0x0/0x224 returned 0 after 4882 usecs [ 3.249984] calling pm_sysrq_init+0x0/0x19 @ 1 [ 3.254708] initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs [ 3.261252] calling audit_watch_init+0x0/0x2f @ 1 [ 3.266234] initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs [ 3.273039] calling default_bdi_init+0x0/0x38 @ 1 [ 3.278062] initcall default_bdi_init+0x0/0x38 returned 0 after 0 usecs [ 3.284868] calling init_bio+0x0/0xda @ 1 [ 3.289160] bio: create slab at 0 [ 3.293366] initcall init_bio+0x0/0xda returned 0 after 976 usecs [ 3.299649] calling fsnotify_init+0x0/0x12 @ 1 [ 3.304374] initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs [ 3.310919] calling fsnotify_notification_init+0x0/0xf0 @ 1 [ 3.316771] initcall fsnotify_notification_init+0x0/0xf0 returned 0 after 0 usecs [ 3.324601] calling cryptomgr_init+0x0/0x12 @ 1 [ 3.329411] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs [ 3.336041] calling blk_settings_init+0x0/0x2a @ 1 [ 3.341110] initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs [ 3.347999] calling blk_ioc_init+0x0/0x2a @ 1 [ 3.352637] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs [ 3.359093] calling blk_softirq_init+0x0/0x6e @ 1 [ 3.364076] initcall blk_softirq_init+0x0/0x6e returned 0 after 0 usecs [ 3.370880] calling genhd_device_init+0x0/0x7c @ 1 [ 3.376025] initcall genhd_device_init+0x0/0x7c returned 0 after 0 usecs [ 3.382920] calling pci_slot_init+0x0/0x46 @ 1 [ 3.387646] initcall pci_slot_init+0x0/0x46 returned 0 after 0 usecs [ 3.394189] calling fbmem_init+0x0/0x91 @ 1 [ 3.398678] initcall fbmem_init+0x0/0x91 returned 0 after 0 usecs [ 3.404962] calling acpi_init+0x0/0x265 @ 1 [ 3.409962] ACPI: EC: Look up EC in DSDT [ 3.493908] ACPI: BIOS _OSI(Linux) query ignored [ 3.517392] ACPI: Interpreter enabled [ 3.521250] ACPI: (supports S0 S1 S3 S4 S5) [ 3.525914] ACPI: Using IOAPIC for interrupt routing [ 3.630784] ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 7F 20090521 tbutils-246 [ 3.640374] ACPI Warning: Incorrect checksum in table [_RAT] - 00, should be 63 20090521 tbutils-246 [ 3.649973] initcall acpi_init+0x0/0x265 returned 0 after 207031 usecs [ 3.656692] calling dock_init+0x0/0x8d @ 1 [ 3.661131] ACPI: No dock devices found. [ 3.665248] initcall dock_init+0x0/0x8d returned 0 after 976 usecs [ 3.671617] calling acpi_pci_root_init+0x0/0x28 @ 1 [ 3.691241] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 3.696323] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 3.702608] pci 0000:00:00.0: PME# disabled [ 3.707041] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 3.713324] pci 0000:00:01.0: PME# disabled [ 3.717756] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 3.724040] pci 0000:00:03.0: PME# disabled [ 3.728473] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 3.734756] pci 0000:00:07.0: PME# disabled [ 3.739332] pci 0000:00:1a.0: reg 20 io port: [0x1f20-0x1f3f] [ 3.745336] pci 0000:00:1a.1: reg 20 io port: [0x1f00-0x1f1f] [ 3.751339] pci 0000:00:1a.2: reg 20 io port: [0x1c00-0x1c1f] [ 3.757347] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf7ffe000-0xf7ffe3ff] [ 3.764289] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 3.770575] pci 0000:00:1a.7: PME# disabled [ 3.775007] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 3.781290] pci 0000:00:1c.0: PME# disabled [ 3.785725] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 3.792012] pci 0000:00:1c.5: PME# disabled [ 3.796437] pci 0000:00:1d.0: reg 20 io port: [0x1f80-0x1f9f] [ 3.802441] pci 0000:00:1d.1: reg 20 io port: [0x1f60-0x1f7f] [ 3.808443] pci 0000:00:1d.2: reg 20 io port: [0x1f40-0x1f5f] [ 3.814449] pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980000-0xff9803ff] [ 3.821388] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 3.827673] pci 0000:00:1d.7: PME# disabled [ 3.832163] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 3.840168] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO [ 3.847232] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f) [ 3.855149] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007) [ 3.863065] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0900 (mask 003f) [ 3.871040] pci 0000:00:1f.2: reg 10 io port: [0x1e00-0x1e07] [ 3.876982] pci 0000:00:1f.2: reg 14 io port: [0x1e10-0x1e13] [ 3.882922] pci 0000:00:1f.2: reg 18 io port: [0x1e20-0x1e27] [ 3.888862] pci 0000:00:1f.2: reg 1c io port: [0x1e30-0x1e33] [ 3.894801] pci 0000:00:1f.2: reg 20 io port: [0x1ec0-0x1edf] [ 3.900742] pci 0000:00:1f.2: reg 24 32bit mmio: [0xff970000-0xff9707ff] [ 3.907659] pci 0000:00:1f.2: PME# supported from D3hot [ 3.913075] pci 0000:00:1f.2: PME# disabled [ 3.917475] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7fff000-0xf7fff0ff] [ 3.924376] pci 0000:00:1f.3: reg 20 io port: [0xcce0-0xccff] [ 3.930391] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 3.936674] pci 0000:01:00.0: PME# disabled [ 3.941085] pci 0000:00:01.0: bridge 32bit mmio: [0xf4e00000-0xf4efffff] [ 3.948061] pci 0000:03:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff] [ 3.954955] pci 0000:03:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] [ 3.961850] pci 0000:03:00.0: reg 1c 64bit mmio: [0xf6000000-0xf6ffffff] [ 3.968742] pci 0000:03:00.0: reg 24 io port: [0xbc80-0xbcff] [ 3.974681] pci 0000:03:00.0: reg 30 32bit mmio: [0xf7e00000-0xf7e1ffff] [ 3.981613] pci 0000:00:03.0: bridge io port: [0xb000-0xbfff] [ 3.987549] pci 0000:00:03.0: bridge 32bit mmio: [0xf5000000-0xf7efffff] [ 3.994442] pci 0000:00:03.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 4.001791] pci 0000:00:07.0: bridge 32bit mmio: [0xf4f00000-0xf4ffffff] [ 4.008803] pci 0000:06:00.0: reg 10 64bit mmio: [0xf4de0000-0xf4deffff] [ 4.015709] pci 0000:06:00.0: reg 18 64bit mmio: [0xf4df0000-0xf4dfffff] [ 4.022678] pci 0000:06:00.0: PME# supported from D3hot D3cold [ 4.028707] pci 0000:06:00.0: PME# disabled [ 4.033135] pci 0000:00:1c.5: bridge 32bit mmio: [0xf4d00000-0xf4dfffff] [ 4.040073] pci 0000:07:0a.0: reg 10 32bit mmio: [0xf4cfb000-0xf4cfb7ff] [ 4.046969] pci 0000:07:0a.0: reg 14 32bit mmio: [0xf4cfc000-0xf4cfffff] [ 4.053899] pci 0000:07:0a.0: supports D1 D2 [ 4.058361] pci 0000:07:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.065165] pci 0000:07:0a.0: PME# disabled [ 4.069571] pci 0000:00:1e.0: transparent bridge [ 4.074384] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4c00000-0xf4cfffff] [ 4.081300] pci_bus 0000:00: on NUMA node 0 [ 4.085679] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 4.092843] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 4.099714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [ 4.106586] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT] [ 4.113458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] [ 4.120298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT] [ 4.127142] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT] [ 5.075684] ACPI: PCI Root Bridge [PCI7] (0000:20) [ 5.080770] pci 0000:20:03.0: PME# supported from D0 D3hot D3cold [ 5.087055] pci 0000:20:03.0: PME# disabled [ 5.091500] pci 0000:20:07.0: PME# supported from D0 D3hot D3cold [ 5.097786] pci 0000:20:07.0: PME# disabled [ 5.102228] pci 0000:20:09.0: PME# supported from D0 D3hot D3cold [ 5.108511] pci 0000:20:09.0: PME# disabled [ 5.113109] pci 0000:20:03.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff] [ 5.120041] pci 0000:22:00.0: reg 10 32bit mmio: [0xdfde0000-0xdfdfffff] [ 5.126966] pci 0000:22:00.0: PME# supported from D0 D3hot D3cold [ 5.133250] pci 0000:22:00.0: PME# disabled [ 5.137663] pci 0000:20:07.0: bridge io port: [0xd000-0xefff] [ 5.143601] pci 0000:20:07.0: bridge 32bit mmio: [0xdf900000-0xdfdfffff] [ 5.150574] pci 0000:23:01.0: PME# supported from D0 D3hot D3cold [ 5.156858] pci 0000:23:01.0: PME# disabled [ 5.161314] pci 0000:23:02.0: PME# supported from D0 D3hot D3cold [ 5.167597] pci 0000:23:02.0: PME# disabled [ 5.172026] pci 0000:22:00.0: bridge io port: [0xd000-0xefff] [ 5.177965] pci 0000:22:00.0: bridge 32bit mmio: [0xdf900000-0xdfcfffff] [ 5.184908] pci 0000:24:00.0: reg 10 io port: [0xe800-0xe8ff] [ 5.190860] pci 0000:24:00.0: reg 14 64bit mmio: [0xdfbf8000-0xdfbfbfff] [ 5.197780] pci 0000:24:00.0: reg 30 32bit mmio: [0xdfc00000-0xdfc3ffff] [ 5.204776] pci 0000:24:00.1: reg 10 io port: [0xec00-0xecff] [ 5.210728] pci 0000:24:00.1: reg 14 64bit mmio: [0xdfbfc000-0xdfbfffff] [ 5.217648] pci 0000:24:00.1: reg 30 32bit mmio: [0xdfc00000-0xdfc3ffff] [ 5.224658] pci 0000:23:01.0: bridge io port: [0xe000-0xefff] [ 5.230598] pci 0000:23:01.0: bridge 32bit mmio: [0xdfb00000-0xdfcfffff] [ 5.237540] pci 0000:25:00.0: reg 10 io port: [0xd800-0xd8ff] [ 5.243491] pci 0000:25:00.0: reg 14 64bit mmio: [0xdf9f8000-0xdf9fbfff] [ 5.250412] pci 0000:25:00.0: reg 30 32bit mmio: [0xdfa00000-0xdfa3ffff] [ 5.257407] pci 0000:25:00.1: reg 10 io port: [0xdc00-0xdcff] [ 5.263360] pci 0000:25:00.1: reg 14 64bit mmio: [0xdf9fc000-0xdf9fffff] [ 5.270279] pci 0000:25:00.1: reg 30 32bit mmio: [0xdfa00000-0xdfa3ffff] [ 5.277290] pci 0000:23:02.0: bridge io port: [0xd000-0xdfff] [ 5.283229] pci 0000:23:02.0: bridge 32bit mmio: [0xdf900000-0xdfafffff] [ 5.290174] pci 0000:20:09.0: bridge 32bit mmio: [0xdf800000-0xdf8fffff] [ 5.297079] pci_bus 0000:20: on NUMA node 0 [ 5.301457] ACPI: PCI Interrupt Routing Table [\_SB_.PCI7._PRT] [ 5.308476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI7.PCI9._PRT] [ 5.315349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI7.PCIA._PRT] [ 5.322220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI7.PCIB._PRT] [ 5.431898] initcall acpi_pci_root_init+0x0/0x28 returned 0 after 1152344 usecs [ 5.439559] calling acpi_pci_link_init+0x0/0x43 @ 1 [ 5.445341] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 5.453930] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 5.462518] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 5.471100] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 5.479682] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 5.488258] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 5.498239] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 5.506825] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 5.514826] initcall acpi_pci_link_init+0x0/0x43 returned 0 after 40039 usecs [ 5.522153] calling pnp_init+0x0/0x12 @ 1 [ 5.526471] initcall pnp_init+0x0/0x12 returned 0 after 0 usecs [ 5.532581] calling setup_shutdown_event+0x0/0x14 @ 1 [ 5.541998] initcall setup_shutdown_event+0x0/0x14 returned 0 after 0 usecs [ 5.549148] calling xen_pcpu_init+0x0/0xa7 @ 1 [ 5.553869] initcall xen_pcpu_init+0x0/0xa7 returned 0 after 0 usecs [ 5.560414] calling xenbus_probe_backend_init+0x0/0x59 @ 1 [ 5.566201] xenbus_probe_backend_init bus registered ok [ 5.571618] initcall xenbus_probe_backend_init+0x0/0x59 returned 0 after 976 usecs [ 5.579532] calling xenbus_probe_frontend_init+0x0/0x59 @ 1 [ 5.585406] xenbus_probe_frontend_init bus registered ok [ 5.590909] initcall xenbus_probe_frontend_init+0x0/0x59 returned 0 after 976 usecs [ 5.598911] calling balloon_init+0x0/0x209 @ 1 [ 5.603632] initcall balloon_init+0x0/0x209 returned -19 after 0 usecs [ 5.610348] calling xen_acpi_processor_extcntl_init+0x0/0x4f @ 1 [ 5.616632] initcall xen_acpi_processor_extcntl_init+0x0/0x4f returned 0 after 0 usecs [ 5.624894] calling misc_init+0x0/0xb0 @ 1 [ 5.629296] initcall misc_init+0x0/0xb0 returned 0 after 0 usecs [ 5.635494] calling cn_init+0x0/0xee @ 1 [ 5.639704] initcall cn_init+0x0/0xee returned 0 after 0 usecs [ 5.645727] calling init_scsi+0x0/0x91 @ 1 [ 5.650227] SCSI subsystem initialized [ 5.654171] initcall init_scsi+0x0/0x91 returned 0 after 1953 usecs [ 5.660628] calling ata_init+0x0/0x364 @ 1 [ 5.665062] libata version 3.00 loaded. [ 5.669095] initcall ata_init+0x0/0x364 returned 0 after 976 usecs [ 5.675466] calling phy_init+0x0/0x2e @ 1 [ 5.679837] initcall phy_init+0x0/0x2e returned 0 after 0 usecs [ 5.685947] calling init_pcmcia_cs+0x0/0x36 @ 1 [ 5.690780] initcall init_pcmcia_cs+0x0/0x36 returned 0 after 0 usecs [ 5.697412] calling usb_init+0x0/0x1a9 @ 1 [ 5.701865] usbcore: registered new interface driver usbfs [ 5.707571] usbcore: registered new interface driver hub [ 5.713114] usbcore: registered new device driver usb [ 5.718359] initcall usb_init+0x0/0x1a9 returned 0 after 2929 usecs [ 5.724816] calling serio_init+0x0/0x86 @ 1 [ 5.729317] initcall serio_init+0x0/0x86 returned 0 after 0 usecs [ 5.735601] calling input_init+0x0/0x136 @ 1 [ 5.740179] initcall input_init+0x0/0x136 returned 0 after 0 usecs [ 5.746550] calling rtc_init+0x0/0x71 @ 1 [ 5.750861] initcall rtc_init+0x0/0x71 returned 0 after 0 usecs [ 5.756972] calling power_supply_class_init+0x0/0x38 @ 1 [ 5.762586] initcall power_supply_class_init+0x0/0x38 returned 0 after 0 usecs [ 5.770156] calling hwmon_init+0x0/0x106 @ 1 [ 5.774734] initcall hwmon_init+0x0/0x106 returned 0 after 0 usecs [ 5.781104] calling thermal_init+0x0/0x3f @ 1 [ 5.785764] initcall thermal_init+0x0/0x3f returned 0 after 0 usecs [ 5.792221] calling md_init+0x0/0xd0 @ 1 [ 5.796429] initcall md_init+0x0/0xd0 returned 0 after 0 usecs [ 5.802454] calling leds_init+0x0/0x40 @ 1 [ 5.806853] initcall leds_init+0x0/0x40 returned 0 after 0 usecs [ 5.813051] calling pci_subsys_init+0x0/0x107 @ 1 [ 5.818032] PCI: Using ACPI for IRQ routing [ 5.822538] initcall pci_subsys_init+0x0/0x107 returned 0 after 976 usecs [ 5.829515] calling proto_init+0x0/0x12 @ 1 [ 5.833981] initcall proto_init+0x0/0x12 returned 0 after 0 usecs [ 5.840265] calling net_dev_init+0x0/0x175 @ 1 [ 5.845083] initcall net_dev_init+0x0/0x175 returned 0 after 976 usecs [ 5.851800] calling neigh_init+0x0/0x71 @ 1 [ 5.856262] initcall neigh_init+0x0/0x71 returned 0 after 0 usecs [ 5.862547] calling fib_rules_init+0x0/0xa6 @ 1 [ 5.867357] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs [ 5.873987] calling pktsched_init+0x0/0xc4 @ 1 [ 5.878711] initcall pktsched_init+0x0/0xc4 returned 0 after 0 usecs [ 5.885256] calling tc_filter_init+0x0/0x4c @ 1 [ 5.890065] initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs [ 5.896696] calling tc_action_init+0x0/0x4c @ 1 [ 5.901506] initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs [ 5.908135] calling genl_init+0x0/0xd9 @ 1 [ 5.915045] initcall genl_init+0x0/0xd9 returned 0 after 2929 usecs [ 5.921503] calling cipso_v4_init+0x0/0x61 @ 1 [ 5.926226] initcall cipso_v4_init+0x0/0x61 returned 0 after 0 usecs [ 5.932772] calling wireless_nlevent_init+0x0/0x31 @ 1 [ 5.938189] initcall wireless_nlevent_init+0x0/0x31 returned 0 after 0 usecs [ 5.945429] calling cfg80211_init+0x0/0x74 @ 1 [ 5.963058] cfg80211: Using static regulatory domain info [ 5.968649] cfg80211: Regulatory domain: US [ 5.973024] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5.980591] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 5.987567] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 5.994542] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 6.001517] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 6.008493] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 6.015468] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 6.022447] cfg80211: Calling CRDA for country: US [ 6.027454] initcall cfg80211_init+0x0/0x74 returned 0 after 22460 usecs [ 6.034345] calling ieee80211_init+0x0/0xb @ 1 [ 6.039067] initcall ieee80211_init+0x0/0xb returned 0 after 0 usecs [ 6.045610] calling netlbl_init+0x0/0x81 @ 1 [ 6.050157] NetLabel: Initializing [ 6.053750] NetLabel: domain hash size = 128 [ 6.058298] NetLabel: protocols = UNLABELED CIPSOv4 [ 6.063464] NetLabel: unlabeled traffic allowed by default [ 6.069227] initcall netlbl_init+0x0/0x81 returned 0 after 3906 usecs [ 6.075859] calling rfkill_init+0x0/0x8b @ 1 [ 6.080461] initcall rfkill_init+0x0/0x8b returned 0 after 0 usecs [ 6.086832] calling sysctl_init+0x0/0x48 @ 1 [ 6.091382] initcall sysctl_init+0x0/0x48 returned 0 after 0 usecs [ 6.097754] calling xen_mc_debugfs+0x0/0x118 @ 1 [ 6.102665] initcall xen_mc_debugfs+0x0/0x118 returned 0 after 0 usecs [ 6.109381] calling xen_mmu_debugfs+0x0/0x2be @ 1 [ 6.114393] initcall xen_mmu_debugfs+0x0/0x2be returned 0 after 0 usecs [ 6.121198] calling pci_iommu_init+0x0/0x17 @ 1 [ 6.126027] initcall pci_iommu_init+0x0/0x17 returned 0 after 0 usecs [ 6.132659] calling print_all_ICs+0x0/0x4ab @ 1 [ 6.137467] [ 6.137468] printing PIC contents [ 6.142662] ... PIC IMR: ffff [ 6.145910] ... PIC IRR: 0c20 [ 6.149165] ... PIC ISR: 0000 [ 6.152415] ... PIC ELCR: 0e20 [ 6.155665] printing local APIC contents on CPU#0/0: [ 6.160819] ... APIC ID: 00000000 (0) [ 6.165106] ... APIC VERSION: 00060015 [ 6.169045] ... APIC TASKPRI: 00000000 (00) [ 6.173418] ... APIC PROCPRI: 00000000 [ 6.177359] ... APIC LDR: 01000000 [ 6.180951] ... APIC DFR: ffffffff [ 6.184543] ... APIC SPIV: 000001ff [ 6.188222] ... APIC ISR field: [ 6.191555] 0000000000000000000000000000000000000000000000000000000000000000 [ 6.199202] ... APIC TMR field: [ 6.202534] 0000000000000000000000000000000000000000000000000000000000000000 [ 6.210191] ... APIC IRR field: [ 6.213523] 0000000000000000000000000000000000000000000000000000000000008000 [ 6.221183] ... APIC ESR: 00000000 [ 6.224776] ... APIC ICR: 000008fc [ 6.228367] ... APIC ICR2: 0e000000 [ 6.232047] ... APIC LVTT: 000200ef [ 6.235726] ... APIC LVTPC: 00000400 [ 6.239491] ... APIC LVT0: 00010700 [ 6.243169] ... APIC LVT1: 00000400 [ 6.246848] ... APIC LVTERR: 000000fe [ 6.250701] ... APIC TMICT: 00002078 [ 6.254468] ... APIC TMCCT: 00000c06 [ 6.258233] ... APIC TDCR: 00000003 [ 6.261913] [ 6.263602] printing local APIC contents on CPU#1/2: [ 6.268758] ... APIC ID: 02000000 (2) [ 6.273046] ... APIC VERSION: 00060015 [ 6.276986] ... APIC TASKPRI: 00000000 (00) [ 6.281358] ... APIC PROCPRI: 00000000 [ 6.285299] ... APIC LDR: 02000000 [ 6.288893] ... APIC DFR: ffffffff [ 6.292484] ... APIC SPIV: 000001ff [ 6.296163] ... APIC ISR field: [ 6.299496] 0000000000000000000000000000000000000000000000000000000000000000 [ 6.307153] ... APIC TMR field: [ 6.310487] 0000000000000000000000000000000000000000000000000000000000000000 [ 6.318143] ... APIC IRR field: [ 6.321475] 0000000000000000000000000000000000000000000000000000000000008000 [ 6.329134] ... APIC ESR: 00000000 [ 6.332726] ... APIC ICR: 00000000 [ 6.336319] ... APIC ICR2: 00000000 [ 6.339998] ... APIC LVTT: 000200ef [ 6.343678] ... APIC LVTPC: 00010400 [ 6.347445] ... APIC LVT0: 00010700 [ 6.351123] ... APIC LVT1: 00010400 [ 6.354802] ... APIC LVTERR: 000000fe [ 6.358655] ... APIC TMICT: 00002078 [ 6.362422] ... APIC TMCCT: 000019ba [ 6.366188] ... APIC TDCR: 00000003 [ 6.369867] [ 6.371554] printing local APIC contents on CPU#2/4: [ 6.376711] ... APIC ID: 04000000 (4) [ 6.380998] ... APIC VERSION: 00060015 [ 6.384939] ... APIC TASKPRI: 00000000 (00) [ 6.389314] ... APIC PROCPRI: 00000000 [ 6.393253] ... APIC LDR: 04000000 [ 6.396846] ... APIC DFR: ffffffff [ 6.400438] ... APIC SPIV: 000001ff [ 6.404117] ... APIC ISR field: [ 6.407448] 0000000000000000000000000000000000000000000000000000000000000000 [ 6.415107] ... APIC TMR field: [ 6.418438] 0000000000000000000000000000000000000000000000000000000000000000 [ 6.426097] ... APIC IRR field: [ 6.429431] 0000000000000000000000000000000000000000000000000000000000008000 [ 6.437089] ... APIC ESR: 00000000 [ 6.444767] ... APIC ICR: 00000000 [ 6.448358] ... APIC ICR2: 00000000 [ 6.452037] ... APIC LVTT: 000200ef [ 6.455716] ... APIC LVTPC: 00010400 [ 6.459482] ... APIC LVT0: 00010700 [ 6.463160] ... APIC LVT1: 00010400 [ 6.466840] ... APIC LVTERR: 000000fe [ 6.470692] ... APIC TMICT: 00002078 [ 6.474458] ... APIC TMCCT: 00001688 [ 6.478224] ... APIC TDCR: 00000003 [ 6.481903] [ 6.483590] printing local APIC contents on CPU#3/6: [ 6.488746] ... APIC ID: 06000000 (6) [ 6.493034] ... APIC VERSION: 00060015 [ 6.496973] ... APIC TASKPRI: 00000000 (00) [ 6.501345] ... APIC PROCPRI: 00000000 [ 6.505286] ... APIC LDR: 08000000 [ 6.508878] ... APIC DFR: ffffffff [ 6.512469] ... APIC SPIV: 000001ff [ 6.516148] ... APIC ISR field: [ 6.519482] 0000000000000000000000000000000000000000000000000000000000000000 [ 6.527141] ... APIC TMR field: [ 6.530475] 0000000000000000000000000000000000000000000000000000000000000000 [ 6.538131] ... APIC IRR field: [ 6.541466] 0000000000000000000000000000000000000000000000000000000000008000 [ 6.549123] ... APIC ESR: 00000000 [ 6.552717] ... APIC ICR: 00000000 [ 6.556309] ... APIC ICR2: 00000000 [ 6.559987] ... APIC LVTT: 000200ef [ 6.563667] ... APIC LVTPC: 00010400 [ 6.567433] ... APIC LVT0: 00010700 [ 6.571111] ... APIC LVT1: 00010400 [ 6.574792] ... APIC LVTERR: 000000fe [ 6.578644] ... APIC TMICT: 00002078 [ 6.582409] ... APIC TMCCT: 000015e5 [ 6.586177] ... APIC TDCR: 00000003 [ 6.589855] [ 6.591541] number of MP IRQ sources: 15. [ 6.595742] number of IO-APIC #8 registers: 24. [ 6.600464] number of IO-APIC #9 registers: 24. [ 6.605184] number of IO-APIC #10 registers: 24. [ 6.609992] testing the IO APIC....................... [ 6.615326] [ 6.617013] IO APIC #8...... [ 6.620087] .... register #00: 00000000 [ 6.624116] ....... : physical APIC id: 00 [ 6.628663] ....... : Delivery Type: 0 [ 6.632865] ....... : LTS : 0 [ 6.637067] .... register #01: 00170020 [ 6.641095] ....... : max redirection entries: 0017 [ 6.646511] ....... : PRQ implemented: 0 [ 6.650971] ....... : IO APIC version: 0020 [ 6.655692] .... IRQ redirection table: [ 6.659722] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 6.665660] 00 000 1 0 0 0 0 0 0 00 [ 6.671134] 01 00F 0 0 0 0 0 1 1 31 [ 6.676610] 02 00F 0 0 0 0 0 1 1 30 [ 6.682080] 03 00F 0 0 0 0 0 1 1 33 [ 6.687554] 04 00F 0 0 0 0 0 1 1 34 [ 6.693027] 05 00F 0 0 0 0 0 1 1 35 [ 6.698497] 06 00F 0 0 0 0 0 1 1 36 [ 6.703970] 07 00F 0 0 0 0 0 1 1 37 [ 6.709440] 08 00F 0 0 0 0 0 1 1 38 [ 6.714910] 09 00F 0 1 0 0 0 1 1 39 [ 6.720382] 0a 00F 0 0 0 0 0 1 1 3A [ 6.725852] 0b 00F 0 0 0 0 0 1 1 3B [ 6.731324] 0c 00F 0 0 0 0 0 1 1 3C [ 6.736796] 0d 00F 0 0 0 0 0 1 1 3D [ 6.742267] 0e 00F 0 0 0 0 0 1 1 3E [ 6.747740] 0f 00F 0 0 0 0 0 1 1 3F [ 6.753212] 10 000 1 0 0 0 0 0 0 00 [ 6.758687] 11 000 1 0 0 0 0 0 0 00 [ 6.764159] 12 000 1 0 0 0 0 0 0 00 [ 6.769631] 13 000 1 0 0 0 0 0 0 00 [ 6.775103] 14 000 1 0 0 0 0 0 0 00 [ 6.780575] 15 000 1 0 0 0 0 0 0 00 [ 6.786048] 16 000 1 0 0 0 0 0 0 00 [ 6.791519] 17 000 1 0 0 0 0 0 0 00 [ 6.796990] [ 6.798677] IO APIC #9...... [ 6.801751] .... register #00: 00000000 [ 6.805777] ....... : physical APIC id: 00 [ 6.810325] ....... : Delivery Type: 0 [ 6.814526] ....... : LTS : 0 [ 6.818729] .... register #01: 00170020 [ 6.822756] ....... : max redirection entries: 0017 [ 6.828170] ....... : PRQ implemented: 0 [ 6.832633] ....... : IO APIC version: 0020 [ 6.837353] .... register #02: 00000000 [ 6.841382] ....... : arbitration: 00 [ 6.845584] .... register #03: 00000001 [ 6.849612] ....... : Boot DT : 1 [ 6.853728] .... IRQ redirection table: [ 6.857755] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 6.863691] 00 000 1 0 0 0 0 0 0 00 [ 6.869161] 01 000 1 0 0 0 0 0 0 00 [ 6.874631] 02 000 1 0 0 0 0 0 0 00 [ 6.880101] 03 000 1 0 0 0 0 0 0 00 [ 6.885572] 04 000 1 0 0 0 0 0 0 00 [ 6.891043] 05 000 1 0 0 0 0 0 0 00 [ 6.896513] 06 000 1 0 0 0 0 0 0 00 [ 6.901982] 07 000 1 0 0 0 0 0 0 00 [ 6.907455] 08 000 1 0 0 0 0 0 0 00 [ 6.912927] 09 000 1 0 0 0 0 0 0 00 [ 6.918397] 0a 000 1 0 0 0 0 0 0 00 [ 6.923868] 0b 000 1 0 0 0 0 0 0 00 [ 6.929339] 0c 000 1 0 0 0 0 0 0 00 [ 6.934810] 0d 000 1 0 0 0 0 0 0 00 [ 6.940280] 0e 000 1 0 0 0 0 0 0 00 [ 6.945752] 0f 000 1 0 0 0 0 0 0 00 [ 6.951227] 10 000 1 0 0 0 0 0 0 00 [ 6.956699] 11 000 1 0 0 0 0 0 0 00 [ 6.962171] 12 000 1 0 0 0 0 0 0 00 [ 6.967641] 13 000 1 0 0 0 0 0 0 00 [ 6.973113] 14 000 1 0 0 0 0 0 0 00 [ 6.978585] 15 000 1 0 0 0 0 0 0 00 [ 6.984057] 16 000 1 0 0 0 0 0 0 00 [ 6.989526] 17 000 1 0 0 0 0 0 0 00 [ 6.995002] [ 6.996689] IO APIC #10...... [ 6.999850] .... register #00: 00000000 [ 7.003878] ....... : physical APIC id: 00 [ 7.008425] ....... : Delivery Type: 0 [ 7.012627] ....... : LTS : 0 [ 7.016829] .... register #01: 00170020 [ 7.020858] ....... : max redirection entries: 0017 [ 7.026272] ....... : PRQ implemented: 0 [ 7.030732] ....... : IO APIC version: 0020 [ 7.035454] .... register #02: 00000000 [ 7.039482] ....... : arbitration: 00 [ 7.043682] .... register #03: 00000001 [ 7.047710] ....... : Boot DT : 1 [ 7.051825] .... IRQ redirection table: [ 7.055852] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 7.061790] 00 000 1 0 0 0 0 0 0 00 [ 7.067264] 01 000 1 0 0 0 0 0 0 00 [ 7.072736] 02 000 1 0 0 0 0 0 0 00 [ 7.078206] 03 000 1 0 0 0 0 0 0 00 [ 7.083679] 04 000 1 0 0 0 0 0 0 00 [ 7.089151] 05 000 1 0 0 0 0 0 0 00 [ 7.094622] 06 000 1 0 0 0 0 0 0 00 [ 7.100094] 07 000 1 0 0 0 0 0 0 00 [ 7.105567] 08 000 1 0 0 0 0 0 0 00 [ 7.111039] 09 000 1 0 0 0 0 0 0 00 [ 7.116512] 0a 000 1 0 0 0 0 0 0 00 [ 7.121983] 0b 000 1 0 0 0 0 0 0 00 [ 7.127456] 0c 000 1 0 0 0 0 0 0 00 [ 7.132928] 0d 000 1 0 0 0 0 0 0 00 [ 7.138400] 0e 000 1 0 0 0 0 0 0 00 [ 7.143873] 0f 000 1 0 0 0 0 0 0 00 [ 7.149348] 10 000 1 0 0 0 0 0 0 00 [ 7.154822] 11 000 1 0 0 0 0 0 0 00 [ 7.160292] 12 000 1 0 0 0 0 0 0 00 [ 7.165762] 13 000 1 0 0 0 0 0 0 00 [ 7.171233] 14 000 1 0 0 0 0 0 0 00 [ 7.176707] 15 000 1 0 0 0 0 0 0 00 [ 7.182178] 16 000 1 0 0 0 0 0 0 00 [ 7.187653] 17 000 1 0 0 0 0 0 0 00 [ 7.193126] IRQ to pin mappings: [ 7.196548] IRQ0 -> 0:2 [ 7.199296] IRQ1 -> 0:1 [ 7.202044] IRQ3 -> 0:3 [ 7.204791] IRQ4 -> 0:4 [ 7.207538] IRQ5 -> 0:5 [ 7.210286] IRQ6 -> 0:6 [ 7.213033] IRQ7 -> 0:7 [ 7.215781] IRQ8 -> 0:8 [ 7.218528] IRQ9 -> 0:9 [ 7.221275] IRQ10 -> 0:10 [ 7.224195] IRQ11 -> 0:11 [ 7.227116] IRQ12 -> 0:12 [ 7.230034] IRQ13 -> 0:13 [ 7.232955] IRQ14 -> 0:14 [ 7.235875] IRQ15 -> 0:15 [ 7.238805] .................................... done. [ 7.244134] initcall print_all_ICs+0x0/0x4ab returned 0 after 544922 usecs [ 7.251198] calling hpet_late_init+0x0/0x1bb @ 1 [ 7.256096] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 7.261692] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 7.272680] initcall hpet_late_init+0x0/0x1bb returned 0 after 8789 usecs [ 7.283744] calling clocksource_done_booting+0x0/0x12 @ 1 [ 7.289420] initcall clocksource_done_booting+0x0/0x12 returned 0 after 0 usecs [ 7.297077] Switched to high resolution mode on CPU 0 [ 7.297658] Switched to high resolution mode on CPU 1 [ 7.297660] Switched to high resolution mode on CPU 3 [ 7.297663] Switched to high resolution mode on CPU 2 [ 7.318040] calling rb_init_debugfs+0x0/0x2f @ 1 [ 7.322941] initcall rb_init_debugfs+0x0/0x2f returned 0 after 4 usecs [ 7.329658] calling tracer_init_debugfs+0x0/0x2fa @ 1 [ 7.335088] initcall tracer_init_debugfs+0x0/0x2fa returned 0 after 96 usecs [ 7.342327] calling init_trace_printk_function_export+0x0/0x2f @ 1 [ 7.348785] initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 1 usecs [ 7.357222] calling event_trace_init+0x0/0x179 @ 1 [ 7.363311] initcall event_trace_init+0x0/0x179 returned 0 after 992 usecs [ 7.370380] calling init_pipe_fs+0x0/0x4c @ 1 [ 7.375025] initcall init_pipe_fs+0x0/0x4c returned 0 after 9 usecs [ 7.381482] calling eventpoll_init+0x0/0xba @ 1 [ 7.386295] initcall eventpoll_init+0x0/0xba returned 0 after 2 usecs [ 7.392924] calling anon_inode_init+0x0/0x131 @ 1 [ 7.397915] initcall anon_inode_init+0x0/0x131 returned 0 after 6 usecs [ 7.404720] calling blk_scsi_ioctl_init+0x0/0x289 @ 1 [ 7.410050] initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 0 usecs [ 7.417202] calling acpi_event_init+0x0/0x81 @ 1 [ 7.426044] initcall acpi_event_init+0x0/0x81 returned 0 after 3854 usecs [ 7.433024] calling pnpacpi_init+0x0/0x8c @ 1 [ 7.437659] pnp: PnP ACPI init [ 7.440916] ACPI: bus type pnp registered [ 7.462364] pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling [ 7.471929] pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling [ 7.482124] IOAPIC[0]: Set routing entry (8-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 7.490491] IOAPIC[0]: Set routing entry (8-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 7.511477] IOAPIC[0]: Set routing entry (8-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 7.525517] IOAPIC[0]: Set routing entry (8-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 7.538714] IOAPIC[0]: Set routing entry (8-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 7.565364] pnp: PnP ACPI: found 11 devices [ 7.569742] ACPI: ACPI bus type pnp unregistered [ 7.574552] initcall pnpacpi_init+0x0/0x8c returned 0 after 133723 usecs [ 7.581443] calling pnp_system_init+0x0/0x12 @ 1 [ 7.586344] system 00:01: ioport range 0xc00-0xc7f has been reserved [ 7.592914] initcall pnp_system_init+0x0/0x12 returned 0 after 6422 usecs [ 7.599891] calling pcistub_init+0x0/0x1a5 @ 1 [ 7.604620] pciback 0000:00:00.0: probing... [ 7.609086] pciback 0000:00:01.0: probing... [ 7.613552] pciback 0000:00:03.0: probing... [ 7.618018] pciback 0000:00:07.0: probing... [ 7.622483] pciback 0000:00:14.0: probing... [ 7.626948] pciback 0000:00:14.1: probing... [ 7.631413] pciback 0000:00:14.2: probing... [ 7.635878] pciback 0000:00:1a.0: probing... [ 7.640344] pciback 0000:00:1a.1: probing... [ 7.644810] pciback 0000:00:1a.2: probing... [ 7.649274] pciback 0000:00:1a.7: probing... [ 7.653739] pciback 0000:00:1c.0: probing... [ 7.658205] pciback 0000:00:1c.5: probing... [ 7.662670] pciback 0000:00:1d.0: probing... [ 7.667135] pciback 0000:00:1d.1: probing... [ 7.671600] pciback 0000:00:1d.2: probing... [ 7.676065] pciback 0000:00:1d.7: probing... [ 7.680530] pciback 0000:00:1e.0: probing... [ 7.684995] pciback 0000:00:1f.0: probing... [ 7.689460] pciback 0000:00:1f.2: probing... [ 7.693926] pciback 0000:00:1f.3: probing... [ 7.698390] pciback 0000:01:00.0: probing... [ 7.702854] pciback 0000:03:00.0: probing... [ 7.707318] pciback 0000:06:00.0: probing... [ 7.711784] pciback 0000:07:0a.0: probing... [ 7.716248] pciback 0000:20:03.0: probing... [ 7.720713] pciback 0000:20:07.0: probing... [ 7.725178] pciback 0000:20:09.0: probing... [ 7.729644] pciback 0000:20:14.0: probing... [ 7.734109] pciback 0000:20:14.1: probing... [ 7.738573] pciback 0000:20:14.2: probing... [ 7.743037] pciback 0000:22:00.0: probing... [ 7.747502] pciback 0000:23:01.0: probing... [ 7.751967] pciback 0000:23:02.0: probing... [ 7.756431] pciback 0000:24:00.0: probing... [ 7.760896] pciback 0000:24:00.1: probing... [ 7.765362] pciback 0000:25:00.0: probing... [ 7.769827] pciback 0000:25:00.1: probing... [ 7.774324] initcall pcistub_init+0x0/0x1a5 returned 0 after 165779 usecs [ 7.781301] calling chr_dev_init+0x0/0xa1 @ 1 [ 7.786271] initcall chr_dev_init+0x0/0xa1 returned 0 after 324 usecs [ 7.792905] calling firmware_class_init+0x0/0x79 @ 1 [ 7.798174] initcall firmware_class_init+0x0/0x79 returned 0 after 23 usecs [ 7.805325] calling init_pcmcia_bus+0x0/0x74 @ 1 [ 7.810255] initcall init_pcmcia_bus+0x0/0x74 returned 0 after 30 usecs [ 7.817059] calling cpufreq_gov_performance_init+0x0/0x12 @ 1 [ 7.823083] initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 usecs [ 7.831087] calling cpufreq_gov_userspace_init+0x0/0x12 @ 1 [ 7.836937] initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 usecs [ 7.844768] calling init_acpi_pm_clocksource+0x0/0xf6 @ 1 [ 7.854966] initcall init_acpi_pm_clocksource+0x0/0xf6 returned 0 after 4417 usecs [ 7.862883] calling pcibios_assign_resources+0x0/0x74 @ 1 [ 7.868576] pci 0000:24:00.1: BAR 6: address space collision on of device [0xdfc00000-0xdfc3ffff] [ 7.877796] pci 0000:25:00.1: BAR 6: address space collision on of device [0xdfa00000-0xdfa3ffff] [ 7.887101] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 [ 7.893212] pci 0000:01:00.0: IO window: disabled [ 7.898284] pci 0000:01:00.0: MEM window: disabled [ 7.903442] pci 0000:01:00.0: PREFETCH window: disabled [ 7.909033] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 7.915141] pci 0000:00:01.0: IO window: disabled [ 7.920213] pci 0000:00:01.0: MEM window: 0xf4e00000-0xf4efffff [ 7.926497] pci 0000:00:01.0: PREFETCH window: disabled [ 7.932088] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 [ 7.938198] pci 0000:00:03.0: IO window: 0xb000-0xbfff [ 7.943704] pci 0000:00:03.0: MEM window: 0xf5000000-0xf7efffff [ 7.949988] pci 0000:00:03.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 7.957906] pci 0000:00:07.0: PCI bridge, secondary bus 0000:04 [ 7.964014] pci 0000:00:07.0: IO window: disabled [ 7.969086] pci 0000:00:07.0: MEM window: 0xf4f00000-0xf4ffffff [ 7.975369] pci 0000:00:07.0: PREFETCH window: disabled [ 7.980959] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05 [ 7.987067] pci 0000:00:1c.0: IO window: disabled [ 7.992137] pci 0000:00:1c.0: MEM window: disabled [ 7.997294] pci 0000:00:1c.0: PREFETCH window: disabled [ 8.002883] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:06 [ 8.008993] pci 0000:00:1c.5: IO window: disabled [ 8.014064] pci 0000:00:1c.5: MEM window: 0xf4d00000-0xf4dfffff [ 8.020348] pci 0000:00:1c.5: PREFETCH window: disabled [ 8.025940] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07 [ 8.032048] pci 0000:00:1e.0: IO window: disabled [ 8.037120] pci 0000:00:1e.0: MEM window: 0xf4c00000-0xf4cfffff [ 8.043404] pci 0000:00:1e.0: PREFETCH window: disabled [ 8.049002] alloc irq_desc for 16 on node -1 [ 8.053636] alloc kstat_irqs on node -1 [ 8.057840] IOAPIC[0]: Set routing entry (8-16 -> 0x49 -> IRQ 16 Mode:1 Active:1) [ 8.065671] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.072561] pci 0000:00:01.0: setting latency timer to 64 [ 8.078154] alloc irq_desc for 28 on node -1 [ 8.082786] alloc kstat_irqs on node -1 [ 8.086991] IOAPIC[1]: Set routing entry (9-4 -> 0x51 -> IRQ 28 Mode:1 Active:1) [ 8.094735] pci 0000:01:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 8.101625] pci 0000:01:00.0: setting latency timer to 64 [ 8.107219] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.114109] pci 0000:00:03.0: setting latency timer to 64 [ 8.119701] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.126591] pci 0000:00:07.0: setting latency timer to 64 [ 8.132185] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.139076] pci 0000:00:1c.0: setting latency timer to 64 [ 8.144670] alloc irq_desc for 17 on node -1 [ 8.149304] alloc kstat_irqs on node -1 [ 8.153509] IOAPIC[0]: Set routing entry (8-17 -> 0x59 -> IRQ 17 Mode:1 Active:1) [ 8.161339] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8.168230] pci 0000:00:1c.5: setting latency timer to 64 [ 8.173825] pci 0000:00:1e.0: setting latency timer to 64 [ 8.179419] pci 0000:20:03.0: PCI bridge, secondary bus 0000:21 [ 8.185527] pci 0000:20:03.0: IO window: disabled [ 8.190599] pci 0000:20:03.0: MEM window: 0xdfe00000-0xdfefffff [ 8.196883] pci 0000:20:03.0: PREFETCH window: disabled [ 8.202475] pci 0000:23:01.0: PCI bridge, secondary bus 0000:24 [ 8.208585] pci 0000:23:01.0: IO window: 0xe000-0xefff [ 8.214092] pci 0000:23:01.0: MEM window: 0xdfb00000-0xdfcfffff [ 8.220377] pci 0000:23:01.0: PREFETCH window: 0xdc000000-0xdc0fffff [ 8.227096] pci 0000:23:02.0: PCI bridge, secondary bus 0000:25 [ 8.233208] pci 0000:23:02.0: IO window: 0xd000-0xdfff [ 8.238713] pci 0000:23:02.0: MEM window: 0xdf900000-0xdfafffff [ 8.244998] pci 0000:23:02.0: PREFETCH window: 0xdc100000-0xdc1fffff [ 8.251716] pci 0000:22:00.0: PCI bridge, secondary bus 0000:23 [ 8.257828] pci 0000:22:00.0: IO window: 0xd000-0xefff [ 8.263334] pci 0000:22:00.0: MEM window: 0xdf900000-0xdfcfffff [ 8.269617] pci 0000:22:00.0: PREFETCH window: 0xdc000000-0xdc1fffff [ 8.276335] pci 0000:20:07.0: PCI bridge, secondary bus 0000:22 [ 8.286528] pci 0000:20:07.0: IO window: 0xd000-0xefff [ 8.292035] pci 0000:20:07.0: MEM window: 0xdf900000-0xdfdfffff [ 8.298318] pci 0000:20:07.0: PREFETCH window: 0xdc000000-0xdc1fffff [ 8.305038] pci 0000:20:09.0: PCI bridge, secondary bus 0000:26 [ 8.311147] pci 0000:20:09.0: IO window: disabled [ 8.316218] pci 0000:20:09.0: MEM window: 0xdf800000-0xdf8fffff [ 8.322501] pci 0000:20:09.0: PREFETCH window: disabled [ 8.328096] pci 0000:20:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.334987] pci 0000:20:03.0: setting latency timer to 64 [ 8.340581] pci 0000:20:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.347472] pci 0000:20:07.0: setting latency timer to 64 [ 8.353067] alloc irq_desc for 54 on node -1 [ 8.357701] alloc kstat_irqs on node -1 [ 8.361903] IOAPIC[2]: Set routing entry (10-6 -> 0x61 -> IRQ 54 Mode:1 Active:1) [ 8.369734] pci 0000:22:00.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 [ 8.376625] pci 0000:22:00.0: setting latency timer to 64 [ 8.382220] alloc irq_desc for 61 on node -1 [ 8.386854] alloc kstat_irqs on node -1 [ 8.391056] IOAPIC[2]: Set routing entry (10-13 -> 0x69 -> IRQ 61 Mode:1 Active:1) [ 8.398974] pci 0000:23:01.0: PCI INT A -> GSI 61 (level, low) -> IRQ 61 [ 8.405866] pci 0000:23:01.0: setting latency timer to 64 [ 8.411461] alloc irq_desc for 63 on node -1 [ 8.416096] alloc kstat_irqs on node -1 [ 8.420297] IOAPIC[2]: Set routing entry (10-15 -> 0x71 -> IRQ 63 Mode:1 Active:1) [ 8.428216] pci 0000:23:02.0: PCI INT A -> GSI 63 (level, low) -> IRQ 63 [ 8.435109] pci 0000:23:02.0: setting latency timer to 64 [ 8.440703] pci 0000:20:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.447596] pci 0000:20:09.0: setting latency timer to 64 [ 8.453185] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 8.458860] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 8.465922] pci_bus 0000:01: resource 1 mem: [0xf4e00000-0xf4efffff] [ 8.472465] pci_bus 0000:03: resource 0 io: [0xb000-0xbfff] [ 8.478315] pci_bus 0000:03: resource 1 mem: [0xf5000000-0xf7efffff] [ 8.484857] pci_bus 0000:03: resource 2 pref mem [0xe0000000-0xefffffff] [ 8.491746] pci_bus 0000:04: resource 1 mem: [0xf4f00000-0xf4ffffff] [ 8.498290] pci_bus 0000:06: resource 1 mem: [0xf4d00000-0xf4dfffff] [ 8.504833] pci_bus 0000:07: resource 1 mem: [0xf4c00000-0xf4cfffff] [ 8.511375] pci_bus 0000:07: resource 3 io: [0x00-0xffff] [ 8.517051] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff] [ 8.524114] pci_bus 0000:20: resource 0 io: [0x00-0xffff] [ 8.529789] pci_bus 0000:20: resource 1 mem: [0x000000-0xffffffffffffffff] [ 8.536852] pci_bus 0000:21: resource 1 mem: [0xdfe00000-0xdfefffff] [ 8.543397] pci_bus 0000:22: resource 0 io: [0xd000-0xefff] [ 8.549246] pci_bus 0000:22: resource 1 mem: [0xdf900000-0xdfdfffff] [ 8.555789] pci_bus 0000:22: resource 2 pref mem [0xdc000000-0xdc1fffff] [ 8.562678] pci_bus 0000:23: resource 0 io: [0xd000-0xefff] [ 8.568528] pci_bus 0000:23: resource 1 mem: [0xdf900000-0xdfcfffff] [ 8.575070] pci_bus 0000:23: resource 2 pref mem [0xdc000000-0xdc1fffff] [ 8.581960] pci_bus 0000:24: resource 0 io: [0xe000-0xefff] [ 8.587810] pci_bus 0000:24: resource 1 mem: [0xdfb00000-0xdfcfffff] [ 8.594354] pci_bus 0000:24: resource 2 pref mem [0xdc000000-0xdc0fffff] [ 8.601244] pci_bus 0000:25: resource 0 io: [0xd000-0xdfff] [ 8.607094] pci_bus 0000:25: resource 1 mem: [0xdf900000-0xdfafffff] [ 8.613637] pci_bus 0000:25: resource 2 pref mem [0xdc100000-0xdc1fffff] [ 8.620527] pci_bus 0000:26: resource 1 mem: [0xdf800000-0xdf8fffff] [ 8.627072] initcall pcibios_assign_resources+0x0/0x74 returned 0 after 740957 usecs [ 8.635163] calling sysctl_core_init+0x0/0x38 @ 1 [ 8.640163] initcall sysctl_core_init+0x0/0x38 returned 0 after 17 usecs [ 8.647054] calling inet_init+0x0/0x20a @ 1 [ 8.651523] NET: Registered protocol family 2 [ 8.656142] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 8.664274] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 8.673028] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 8.680152] TCP: Hash tables configured (established 262144 bind 65536) [ 8.686957] TCP reno registered [ 8.690401] initcall inet_init+0x0/0x20a returned 0 after 37979 usecs [ 8.697034] calling af_unix_init+0x0/0x55 @ 1 [ 8.701671] NET: Registered protocol family 1 [ 8.706228] initcall af_unix_init+0x0/0x55 returned 0 after 4450 usecs [ 8.712946] calling populate_rootfs+0x0/0x281 @ 1 [ 8.717975] Trying to unpack rootfs image as initramfs... [ 8.836821] Freeing initrd memory: 5886k freed [ 8.842557] initcall populate_rootfs+0x0/0x281 returned 0 after 121735 usecs [ 8.849805] calling i8259A_init_sysfs+0x0/0x22 @ 1 [ 8.854975] initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 96 usecs [ 8.861954] calling vsyscall_init+0x0/0x6c @ 1 [ 8.866693] initcall vsyscall_init+0x0/0x6c returned 0 after 14 usecs [ 8.873325] calling sbf_init+0x0/0xe9 @ 1 [ 8.877617] Simple Boot Flag at 0x7a set to 0x80 [ 8.882429] initcall sbf_init+0x0/0xe9 returned 0 after 4702 usecs [ 8.888801] calling i8237A_init_sysfs+0x0/0x22 @ 1 [ 8.893917] initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 45 usecs [ 8.900913] calling add_rtc_cmos+0x0/0xa9 @ 1 [ 8.905565] initcall add_rtc_cmos+0x0/0xa9 returned 0 after 2 usecs [ 8.912040] calling cache_sysfs_init+0x0/0x64 @ 1 [ 8.917656] initcall cache_sysfs_init+0x0/0x64 returned 0 after 603 usecs [ 8.924649] calling mce_init_device+0x0/0x164 @ 1 [ 8.929878] initcall mce_init_device+0x0/0x164 returned 0 after 238 usecs [ 8.936861] calling msr_init+0x0/0x119 @ 1 [ 8.941380] initcall msr_init+0x0/0x119 returned 0 after 139 usecs [ 8.947764] calling cpuid_init+0x0/0x119 @ 1 [ 8.952449] initcall cpuid_init+0x0/0x119 returned 0 after 133 usecs [ 8.958997] calling ioapic_init_sysfs+0x0/0xcf @ 1 [ 8.964154] initcall ioapic_init_sysfs+0x0/0xcf returned 0 after 84 usecs [ 8.971134] calling add_pcspkr+0x0/0x28 @ 1 [ 8.975630] initcall add_pcspkr+0x0/0x28 returned 0 after 30 usecs [ 8.982005] calling microcode_init+0x0/0x132 @ 1 [ 8.986937] microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x11 [ 8.992964] microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x11 [ 8.998990] microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x11 [ 9.005019] microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x11 [ 9.011073] Microcode Update Driver: v2.00 , Peter Oruba [ 9.019250] initcall microcode_init+0x0/0x132 returned 0 after 31599 usecs [ 9.026318] calling start_periodic_check_for_corruption+0x0/0x37 @ 1 [ 9.032948] Scanning for low memory corruption every 60 seconds [ 9.039061] initcall start_periodic_check_for_corruption+0x0/0x37 returned 0 after 5969 usecs [ 9.047934] calling audit_classes_init+0x0/0xaf @ 1 [ 9.053104] initcall audit_classes_init+0x0/0xaf returned 0 after 9 usecs [ 9.060083] calling init_vdso_vars+0x0/0x241 @ 1 [ 9.064992] initcall init_vdso_vars+0x0/0x241 returned 0 after 12 usecs [ 9.071796] calling ia32_binfmt_init+0x0/0x14 @ 1 [ 9.076785] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 5 usecs [ 9.083588] calling sysenter_setup+0x0/0x2f6 @ 1 [ 9.088487] initcall sysenter_setup+0x0/0x2f6 returned 0 after 1 usecs [ 9.095206] calling proc_schedstat_init+0x0/0x22 @ 1 [ 9.100453] initcall proc_schedstat_init+0x0/0x22 returned 0 after 4 usecs [ 9.107518] calling proc_execdomains_init+0x0/0x22 @ 1 [ 9.112936] initcall proc_execdomains_init+0x0/0x22 returned 0 after 1 usecs [ 9.120176] calling ioresources_init+0x0/0x3c @ 1 [ 9.125162] initcall ioresources_init+0x0/0x3c returned 0 after 1 usecs [ 9.131967] calling uid_cache_init+0x0/0x9b @ 1 [ 9.136780] initcall uid_cache_init+0x0/0x9b returned 0 after 4 usecs [ 9.143411] calling init_posix_timers+0x0/0xe7 @ 1 [ 9.148482] initcall init_posix_timers+0x0/0xe7 returned 0 after 1 usecs [ 9.155371] calling init_posix_cpu_timers+0x0/0xae @ 1 [ 9.160789] initcall init_posix_cpu_timers+0x0/0xae returned 0 after 0 usecs [ 9.168024] calling nsproxy_cache_init+0x0/0x2d @ 1 [ 9.173181] initcall nsproxy_cache_init+0x0/0x2d returned 0 after 0 usecs [ 9.180160] calling create_proc_profile+0x0/0x2a4 @ 1 [ 9.185491] initcall create_proc_profile+0x0/0x2a4 returned 0 after 0 usecs [ 9.192641] calling timekeeping_init_device+0x0/0x22 @ 1 [ 9.198292] initcall timekeeping_init_device+0x0/0x22 returned 0 after 57 usecs [ 9.205948] calling init_clocksource_sysfs+0x0/0x50 @ 1 [ 9.211498] initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 45 usecs [ 9.219068] calling init_timer_list_procfs+0x0/0x2c @ 1 [ 9.224575] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 1 usecs [ 9.231899] calling init_tstats_procfs+0x0/0x2c @ 1 [ 9.237057] initcall init_tstats_procfs+0x0/0x2c returned 0 after 1 usecs [ 9.244034] calling futex_init+0x0/0x68 @ 1 [ 9.248504] initcall futex_init+0x0/0x68 returned 0 after 5 usecs [ 9.254788] calling proc_dma_init+0x0/0x22 @ 1 [ 9.259513] initcall proc_dma_init+0x0/0x22 returned 0 after 0 usecs [ 9.266057] calling proc_modules_init+0x0/0x22 @ 1 [ 9.271127] initcall proc_modules_init+0x0/0x22 returned 0 after 1 usecs [ 9.278017] calling kallsyms_init+0x0/0x25 @ 1 [ 9.282742] initcall kallsyms_init+0x0/0x25 returned 0 after 0 usecs [ 9.289287] calling snapshot_device_init+0x0/0x12 @ 1 [ 9.294656] initcall snapshot_device_init+0x0/0x12 returned 0 after 36 usecs [ 9.301895] calling crash_save_vmcoreinfo_init+0x0/0x4a5 @ 1 [ 9.307854] initcall crash_save_vmcoreinfo_init+0x0/0x4a5 returned 0 after 21 usecs [ 9.315858] calling crash_notes_memory_init+0x0/0x37 @ 1 [ 9.321454] initcall crash_notes_memory_init+0x0/0x37 returned 0 after 4 usecs [ 9.329025] calling pid_namespaces_init+0x0/0x2d @ 1 [ 9.334272] initcall pid_namespaces_init+0x0/0x2d returned 0 after 2 usecs [ 9.341336] calling audit_init+0x0/0x133 @ 1 [ 9.345884] audit: initializing netlink socket (disabled) [ 9.351489] type=2000 audit(1268840716.926:1): initialized [ 9.357168] initcall audit_init+0x0/0x133 returned 0 after 11021 usecs [ 9.363885] calling audit_tree_init+0x0/0x49 @ 1 [ 9.368781] initcall audit_tree_init+0x0/0x49 returned 0 after 0 usecs [ 9.375500] calling init_kprobes+0x0/0x148 @ 1 [ 9.389546] initcall init_kprobes+0x0/0x148 returned 0 after 9108 usecs [ 9.396352] calling utsname_sysctl_init+0x0/0x14 @ 1 [ 9.401608] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 11 usecs [ 9.408760] calling init_markers+0x0/0x12 @ 1 [ 9.413397] initcall init_markers+0x0/0x12 returned 0 after 0 usecs [ 9.419852] calling init_tracepoints+0x0/0x12 @ 1 [ 9.424835] initcall init_tracepoints+0x0/0x12 returned 0 after 0 usecs [ 9.435720] calling init_events+0x0/0x64 @ 1 [ 9.440271] initcall init_events+0x0/0x64 returned 0 after 1 usecs [ 9.446640] calling init_sched_switch_trace+0x0/0x12 @ 1 [ 9.452231] initcall init_sched_switch_trace+0x0/0x12 returned 0 after 1 usecs [ 9.459801] calling init_blk_tracer+0x0/0x55 @ 1 [ 9.464696] initcall init_blk_tracer+0x0/0x55 returned 0 after 0 usecs [ 9.471415] calling perf_counter_sysfs_init+0x0/0x19 @ 1 [ 9.477008] initcall perf_counter_sysfs_init+0x0/0x19 returned 0 after 3 usecs [ 9.484579] calling init_per_zone_wmark_min+0x0/0x67 @ 1 [ 9.490574] initcall init_per_zone_wmark_min+0x0/0x67 returned 0 after 395 usecs [ 9.498317] calling pdflush_init+0x0/0x1c @ 1 [ 9.502984] initcall pdflush_init+0x0/0x1c returned 0 after 28 usecs [ 9.509531] calling kswapd_init+0x0/0x20 @ 1 [ 9.514096] initcall kswapd_init+0x0/0x20 returned 0 after 15 usecs [ 9.520554] calling init_tmpfs+0x0/0xd7 @ 1 [ 9.525039] initcall init_tmpfs+0x0/0xd7 returned 0 after 22 usecs [ 9.531410] calling setup_vmstat+0x0/0xbe @ 1 [ 9.536054] initcall setup_vmstat+0x0/0xbe returned 0 after 7 usecs [ 9.542511] calling mm_sysfs_init+0x0/0x29 @ 1 [ 9.547238] initcall mm_sysfs_init+0x0/0x29 returned 0 after 2 usecs [ 9.553783] calling proc_vmalloc_init+0x0/0x25 @ 1 [ 9.558854] initcall proc_vmalloc_init+0x0/0x25 returned 0 after 1 usecs [ 9.565746] calling procswaps_init+0x0/0x22 @ 1 [ 9.570557] initcall procswaps_init+0x0/0x22 returned 0 after 1 usecs [ 9.577186] calling hugetlb_init+0x0/0x363 @ 1 [ 9.581911] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 9.588460] initcall hugetlb_init+0x0/0x363 returned 0 after 6397 usecs [ 9.595264] calling slab_proc_init+0x0/0x25 @ 1 [ 9.600073] initcall slab_proc_init+0x0/0x25 returned 0 after 1 usecs [ 9.606704] calling slab_sysfs_init+0x0/0xee @ 1 [ 9.613537] initcall slab_sysfs_init+0x0/0xee returned 0 after 1890 usecs [ 9.620515] calling fasync_init+0x0/0x2a @ 1 [ 9.625069] initcall fasync_init+0x0/0x2a returned 0 after 3 usecs [ 9.631440] calling proc_filesystems_init+0x0/0x22 @ 1 [ 9.636859] initcall proc_filesystems_init+0x0/0x22 returned 0 after 2 usecs [ 9.644096] calling dnotify_init+0x0/0x80 @ 1 [ 9.648739] initcall dnotify_init+0x0/0x80 returned 0 after 6 usecs [ 9.655196] calling inotify_setup+0x0/0x12 @ 1 [ 9.659920] initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs [ 9.666465] calling inotify_user_setup+0x0/0xbe @ 1 [ 9.671642] initcall inotify_user_setup+0x0/0xbe returned 0 after 19 usecs [ 9.678707] calling aio_setup+0x0/0x71 @ 1 [ 9.683137] initcall aio_setup+0x0/0x71 returned 0 after 51 usecs [ 9.689422] calling proc_locks_init+0x0/0x22 @ 1 [ 9.694321] initcall proc_locks_init+0x0/0x22 returned 0 after 1 usecs [ 9.701040] calling init_sys32_ioctl+0x0/0x82 @ 1 [ 9.706035] initcall init_sys32_ioctl+0x0/0x82 returned 0 after 11 usecs [ 9.712925] calling init_mbcache+0x0/0x14 @ 1 [ 9.717563] initcall init_mbcache+0x0/0x14 returned 0 after 0 usecs [ 9.724021] calling dquot_init+0x0/0xf9 @ 1 [ 9.728482] VFS: Disk quotas dquot_6.5.2 [ 9.732666] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 9.739303] initcall dquot_init+0x0/0xf9 returned 0 after 10568 usecs [ 9.745935] calling init_v2_quota_format+0x0/0x12 @ 1 [ 9.751267] initcall init_v2_quota_format+0x0/0x12 returned 0 after 0 usecs [ 9.758417] calling proc_cmdline_init+0x0/0x22 @ 1 [ 9.763489] initcall proc_cmdline_init+0x0/0x22 returned 0 after 1 usecs [ 9.770380] calling proc_cpuinfo_init+0x0/0x22 @ 1 [ 9.775451] initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 1 usecs [ 9.782341] calling proc_devices_init+0x0/0x22 @ 1 [ 9.787412] initcall proc_devices_init+0x0/0x22 returned 0 after 1 usecs [ 9.794302] calling proc_interrupts_init+0x0/0x22 @ 1 [ 9.799634] initcall proc_interrupts_init+0x0/0x22 returned 0 after 1 usecs [ 9.806785] calling proc_loadavg_init+0x0/0x22 @ 1 [ 9.811856] initcall proc_loadavg_init+0x0/0x22 returned 0 after 0 usecs [ 9.818744] calling proc_meminfo_init+0x0/0x22 @ 1 [ 9.823815] initcall proc_meminfo_init+0x0/0x22 returned 0 after 1 usecs [ 9.830705] calling proc_stat_init+0x0/0x22 @ 1 [ 9.835514] initcall proc_stat_init+0x0/0x22 returned 0 after 1 usecs [ 9.842145] calling proc_uptime_init+0x0/0x22 @ 1 [ 9.847130] initcall proc_uptime_init+0x0/0x22 returned 0 after 1 usecs [ 9.853935] calling proc_version_init+0x0/0x22 @ 1 [ 9.859005] initcall proc_version_init+0x0/0x22 returned 0 after 1 usecs [ 9.865895] calling proc_softirqs_init+0x0/0x22 @ 1 [ 9.871053] initcall proc_softirqs_init+0x0/0x22 returned 0 after 1 usecs [ 9.878029] calling proc_kcore_init+0x0/0x46 @ 1 [ 9.882927] initcall proc_kcore_init+0x0/0x46 returned 0 after 1 usecs [ 9.889644] calling vmcore_init+0x0/0x89f @ 1 [ 9.894281] initcall vmcore_init+0x0/0x89f returned 0 after 0 usecs [ 9.900738] calling proc_kmsg_init+0x0/0x25 @ 1 [ 9.905546] initcall proc_kmsg_init+0x0/0x25 returned 0 after 1 usecs [ 9.912177] calling proc_page_init+0x0/0x42 @ 1 [ 9.916990] initcall proc_page_init+0x0/0x42 returned 0 after 2 usecs [ 9.923621] calling init_devpts_fs+0x0/0x4c @ 1 [ 9.928442] initcall init_devpts_fs+0x0/0x4c returned 0 after 10 usecs [ 9.935161] calling init_ext3_fs+0x0/0x71 @ 1 [ 9.939889] initcall init_ext3_fs+0x0/0x71 returned 0 after 88 usecs [ 9.946434] calling journal_init+0x0/0x99 @ 1 [ 9.951244] initcall journal_init+0x0/0x99 returned 0 after 168 usecs [ 9.957874] calling init_ramfs_fs+0x0/0x12 @ 1 [ 9.962598] initcall init_ramfs_fs+0x0/0x12 returned 0 after 1 usecs [ 9.969140] calling init_hugetlbfs_fs+0x0/0x98 @ 1 [ 9.974268] initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 55 usecs [ 9.981247] calling init_fat_fs+0x0/0x4f @ 1 [ 9.985879] initcall init_fat_fs+0x0/0x4f returned 0 after 80 usecs [ 9.992337] calling init_vfat_fs+0x0/0x12 @ 1 [ 9.996973] initcall init_vfat_fs+0x0/0x12 returned 0 after 1 usecs [ 10.003430] calling init_msdos_fs+0x0/0x12 @ 1 [ 10.008152] initcall init_msdos_fs+0x0/0x12 returned 0 after 0 usecs [ 10.014696] calling init_iso9660_fs+0x0/0x71 @ 1 [ 10.019643] initcall init_iso9660_fs+0x0/0x71 returned 0 after 50 usecs [ 10.026451] calling init_nfs_fs+0x0/0x134 @ 1 [ 10.031228] initcall init_nfs_fs+0x0/0x134 returned 0 after 137 usecs [ 10.037861] calling init_nlm+0x0/0x22 @ 1 [ 10.042164] initcall init_nlm+0x0/0x22 returned 0 after 10 usecs [ 10.048362] calling init_nls_cp437+0x0/0x12 @ 1 [ 10.053170] initcall init_nls_cp437+0x0/0x12 returned 0 after 0 usecs [ 10.059802] calling init_nls_ascii+0x0/0x12 @ 1 [ 10.064610] initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs [ 10.071241] calling init_nls_iso8859_1+0x0/0x12 @ 1 [ 10.076399] initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 usecs [ 10.083376] calling init_nls_utf8+0x0/0x29 @ 1 [ 10.088101] initcall init_nls_utf8+0x0/0x29 returned 0 after 0 usecs [ 10.094645] calling init_autofs4_fs+0x0/0x26 @ 1 [ 10.099577] initcall init_autofs4_fs+0x0/0x26 returned 0 after 34 usecs [ 10.106382] calling ipc_init+0x0/0x23 @ 1 [ 10.110676] msgmni has been set to 11933 [ 10.114796] initcall ipc_init+0x0/0x23 returned 0 after 4026 usecs [ 10.121167] calling ipc_sysctl_init+0x0/0x14 @ 1 [ 10.126085] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 19 usecs [ 10.132887] calling init_mqueue_fs+0x0/0xb4 @ 1 [ 10.137775] initcall init_mqueue_fs+0x0/0xb4 returned 0 after 73 usecs [ 10.144495] calling key_proc_init+0x0/0x59 @ 1 [ 10.149223] initcall key_proc_init+0x0/0x59 returned 0 after 3 usecs [ 10.155768] calling selinux_nf_ip_init+0x0/0x62 @ 1 [ 10.160924] SELinux: Registering netfilter hooks [ 10.165821] initcall selinux_nf_ip_init+0x0/0x62 returned 0 after 4782 usecs [ 10.173058] calling init_sel_fs+0x0/0x68 @ 1 [ 10.177657] initcall init_sel_fs+0x0/0x68 returned 0 after 47 usecs [ 10.184114] calling selnl_init+0x0/0x4d @ 1 [ 10.188581] initcall selnl_init+0x0/0x4d returned 0 after 2 usecs [ 10.194865] calling sel_netif_init+0x0/0x66 @ 1 [ 10.199678] initcall sel_netif_init+0x0/0x66 returned 0 after 2 usecs [ 10.206307] calling sel_netnode_init+0x0/0x74 @ 1 [ 10.211291] initcall sel_netnode_init+0x0/0x74 returned 0 after 1 usecs [ 10.218094] calling sel_netport_init+0x0/0x74 @ 1 [ 10.223078] initcall sel_netport_init+0x0/0x74 returned 0 after 1 usecs [ 10.229883] calling aurule_init+0x0/0x37 @ 1 [ 10.234432] initcall aurule_init+0x0/0x37 returned 0 after 0 usecs [ 10.240802] calling crypto_wq_init+0x0/0x2e @ 1 [ 10.245660] initcall crypto_wq_init+0x0/0x2e returned 0 after 46 usecs [ 10.252376] calling crypto_algapi_init+0x0/0xd @ 1 [ 10.257449] initcall crypto_algapi_init+0x0/0xd returned 0 after 2 usecs [ 10.264338] calling chainiv_module_init+0x0/0x12 @ 1 [ 10.269583] initcall chainiv_module_init+0x0/0x12 returned 0 after 1 usecs [ 10.276647] calling eseqiv_module_init+0x0/0x12 @ 1 [ 10.281803] initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs [ 10.288781] calling hmac_module_init+0x0/0x12 @ 1 [ 10.293764] initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs [ 10.300566] calling md5_mod_init+0x0/0x12 @ 1 [ 10.305237] initcall md5_mod_init+0x0/0x12 returned 0 after 32 usecs [ 10.311782] calling sha1_generic_mod_init+0x0/0x12 @ 1 [ 10.317220] initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 21 usecs [ 10.324549] calling crypto_ecb_module_init+0x0/0x12 @ 1 [ 10.330052] initcall crypto_ecb_module_init+0x0/0x12 returned 0 after 0 usecs [ 10.337377] calling crypto_cbc_module_init+0x0/0x12 @ 1 [ 10.342880] initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 usecs [ 10.350205] calling des_generic_mod_init+0x0/0x3f @ 1 [ 10.355596] initcall des_generic_mod_init+0x0/0x3f returned 0 after 57 usecs [ 10.362834] calling aes_init+0x0/0x12 @ 1 [ 10.367157] initcall aes_init+0x0/0x12 returned 0 after 33 usecs [ 10.373354] calling arc4_init+0x0/0x12 @ 1 [ 10.377772] initcall arc4_init+0x0/0x12 returned 0 after 40 usecs [ 10.384055] calling crypto_authenc_module_init+0x0/0x12 @ 1 [ 10.389906] initcall crypto_authenc_module_init+0x0/0x12 returned 0 after 0 usecs [ 10.397736] calling krng_mod_init+0x0/0x12 @ 1 [ 10.402472] alg: No test for stdrng (krng) [ 10.406769] initcall krng_mod_init+0x0/0x12 returned 0 after 4208 usecs [ 10.413574] calling proc_genhd_init+0x0/0x3c @ 1 [ 10.418474] initcall proc_genhd_init+0x0/0x3c returned 0 after 2 usecs [ 10.425191] calling bsg_init+0x0/0x12e @ 1 [ 10.429645] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 10.437392] initcall bsg_init+0x0/0x12e returned 0 after 7642 usecs [ 10.443849] calling noop_init+0x0/0x14 @ 1 [ 10.448224] io scheduler noop registered [ 10.456427] initcall noop_init+0x0/0x14 returned 0 after 8013 usecs [ 10.462884] calling as_init+0x0/0x14 @ 1 [ 10.467085] io scheduler anticipatory registered [ 10.471894] initcall as_init+0x0/0x14 returned 0 after 4696 usecs [ 10.478177] calling deadline_init+0x0/0x14 @ 1 [ 10.482898] io scheduler deadline registered [ 10.487360] initcall deadline_init+0x0/0x14 returned 0 after 4358 usecs [ 10.494165] calling cfq_init+0x0/0x94 @ 1 [ 10.498461] io scheduler cfq registered (default) [ 10.503357] initcall cfq_init+0x0/0x94 returned 0 after 4789 usecs [ 10.509727] calling percpu_counter_startup+0x0/0x3c @ 1 [ 10.515231] initcall percpu_counter_startup+0x0/0x3c returned 0 after 0 usecs [ 10.522555] calling pci_init+0x0/0x35 @ 1 [ 10.526861] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080 [ 10.533317] pci 0000:00:1a.0: Performing full reset [ 10.538401] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0080 [ 10.544859] pci 0000:00:1a.1: Performing full reset [ 10.549942] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0080 [ 10.556397] pci 0000:00:1a.2: Performing full reset [ 10.561502] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080 [ 10.567958] pci 0000:00:1d.0: Performing full reset [ 10.573040] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0080 [ 10.579497] pci 0000:00:1d.1: Performing full reset [ 10.584579] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0080 [ 10.591036] pci 0000:00:1d.2: Performing full reset [ 10.596147] pci 0000:03:00.0: Boot video device [ 10.600887] initcall pci_init+0x0/0x35 returned 0 after 72329 usecs [ 10.607346] calling pci_proc_init+0x0/0x6a @ 1 [ 10.612130] initcall pci_proc_init+0x0/0x6a returned 0 after 60 usecs [ 10.618763] calling pcie_portdrv_init+0x0/0x4c @ 1 [ 10.623920] alloc irq_desc for 72 on node -1 [ 10.628555] alloc kstat_irqs on node -1 [ 10.632763] pcieport-driver 0000:00:01.0: irq 72 for MSI/MSI-X [ 10.638792] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 10.645564] alloc irq_desc for 73 on node -1 [ 10.650198] alloc kstat_irqs on node -1 [ 10.654405] pcieport-driver 0000:00:03.0: irq 73 for MSI/MSI-X [ 10.660432] pcieport-driver 0000:00:03.0: setting latency timer to 64 [ 10.667202] alloc irq_desc for 74 on node -1 [ 10.671837] alloc kstat_irqs on node -1 [ 10.676045] pcieport-driver 0000:00:07.0: irq 74 for MSI/MSI-X [ 10.682073] pcieport-driver 0000:00:07.0: setting latency timer to 64 [ 10.688836] alloc irq_desc for 75 on node -1 [ 10.693469] alloc kstat_irqs on node -1 [ 10.697678] pcieport-driver 0000:00:1c.0: irq 75 for MSI/MSI-X [ 10.703706] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 10.710469] alloc irq_desc for 76 on node -1 [ 10.715103] alloc kstat_irqs on node -1 [ 10.719311] pcieport-driver 0000:00:1c.5: irq 76 for MSI/MSI-X [ 10.725340] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 10.732137] alloc irq_desc for 77 on node -1 [ 10.736771] alloc kstat_irqs on node -1 [ 10.740980] pcieport-driver 0000:20:03.0: irq 77 for MSI/MSI-X [ 10.747009] pcieport-driver 0000:20:03.0: setting latency timer to 64 [ 10.753794] alloc irq_desc for 78 on node -1 [ 10.758427] alloc kstat_irqs on node -1 [ 10.762636] pcieport-driver 0000:20:07.0: irq 78 for MSI/MSI-X [ 10.768666] pcieport-driver 0000:20:07.0: setting latency timer to 64 [ 10.775453] alloc irq_desc for 79 on node -1 [ 10.780087] alloc kstat_irqs on node -1 [ 10.784296] pcieport-driver 0000:20:09.0: irq 79 for MSI/MSI-X [ 10.790324] pcieport-driver 0000:20:09.0: setting latency timer to 64 [ 10.797132] alloc irq_desc for 80 on node -1 [ 10.801765] alloc kstat_irqs on node -1 [ 10.805978] pcieport-driver 0000:22:00.0: irq 80 for MSI/MSI-X [ 10.812010] pcieport-driver 0000:22:00.0: setting latency timer to 64 [ 10.818795] alloc irq_desc for 81 on node -1 [ 10.823430] alloc kstat_irqs on node -1 [ 10.827643] pcieport-driver 0000:23:01.0: irq 81 for MSI/MSI-X [ 10.833675] pcieport-driver 0000:23:01.0: setting latency timer to 64 [ 10.840515] alloc irq_desc for 82 on node -1 [ 10.845150] alloc kstat_irqs on node -1 [ 10.849363] pcieport-driver 0000:23:02.0: irq 82 for MSI/MSI-X [ 10.855395] pcieport-driver 0000:23:02.0: setting latency timer to 64 [ 10.862206] initcall pcie_portdrv_init+0x0/0x4c returned 0 after 232855 usecs [ 10.869531] calling aer_service_init+0x0/0x20 @ 1 [ 10.874523] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support [ 10.882790] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support [ 10.891056] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support [ 10.899322] aer 0000:20:03.0:pcie02: AER service couldn't init device: no _OSC support [ 10.907588] aer 0000:20:07.0:pcie02: AER service couldn't init device: no _OSC support [ 10.915855] aer 0000:20:09.0:pcie02: AER service couldn't init device: no _OSC support [ 10.924146] initcall aer_service_init+0x0/0x20 returned 0 after 48481 usecs [ 10.931298] calling pci_hotplug_init+0x0/0x1d @ 1 [ 10.936280] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 10.942045] initcall pci_hotplug_init+0x0/0x1d returned 0 after 5629 usecs [ 10.949108] calling pci_stub_init+0x0/0x1b @ 1 [ 10.953863] initcall pci_stub_init+0x0/0x1b returned 0 after 30 usecs [ 10.960493] calling fb_console_init+0x0/0x11d @ 1 [ 10.965510] initcall fb_console_init+0x0/0x11d returned 0 after 31 usecs [ 10.972401] calling genericbl_init+0x0/0x12 @ 1 [ 10.977238] initcall genericbl_init+0x0/0x12 returned 0 after 25 usecs [ 10.983957] calling xenfb_init+0x0/0x58 @ 1 [ 10.988421] initcall xenfb_init+0x0/0x58 returned -19 after 0 usecs [ 10.994878] calling efifb_init+0x0/0x1f5 @ 1 [ 10.999431] initcall efifb_init+0x0/0x1f5 returned -19 after 2 usecs [ 11.005975] calling acpi_reserve_resources+0x0/0xeb @ 1 [ 11.011481] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 2 usecs [ 11.018806] calling irqrouter_init_sysfs+0x0/0x38 @ 1 [ 11.024184] initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 44 usecs [ 11.031422] calling acpi_ac_init+0x0/0x45 @ 1 [ 11.036103] initcall acpi_ac_init+0x0/0x45 returned 0 after 42 usecs [ 11.042650] calling acpi_button_init+0x0/0x56 @ 1 [ 11.047699] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 11.055444] ACPI: Power Button [PWRF] [ 11.059370] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 11.067899] ACPI: Power Button [VBTN] [ 11.071789] initcall acpi_button_init+0x0/0x56 returned 0 after 23593 usecs [ 11.078943] calling acpi_fan_init+0x0/0x56 @ 1 [ 11.083700] initcall acpi_fan_init+0x0/0x56 returned 0 after 32 usecs [ 11.090331] calling acpi_video_init+0x0/0x77 @ 1 [ 11.095283] initcall acpi_video_init+0x0/0x77 returned 0 after 51 usecs [ 11.102089] calling acpi_processor_init+0x0/0x136 @ 1 [ 11.107815] Monitor-Mwait will be used to enter C-1 state [ 11.113424] Monitor-Mwait will be used to enter C-2 state [ 11.119027] Monitor-Mwait will be used to enter C-3 state [ 11.124657] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 11.130685] processor LNXCPU:00: registered as cooling_device0 [ 11.137147] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 11.143160] processor LNXCPU:01: registered as cooling_device1 [ 11.149612] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3]) [ 11.155629] processor LNXCPU:02: registered as cooling_device2 [ 11.162089] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3]) [ 11.168103] processor LNXCPU:03: registered as cooling_device3 [ 11.174444] initcall acpi_processor_init+0x0/0x136 returned 0 after 65471 usecs [ 11.182103] calling acpi_container_init+0x0/0x42 @ 1 [ 11.269806] initcall acpi_container_init+0x0/0x42 returned 0 after 80548 usecs [ 11.277379] calling acpi_thermal_init+0x0/0x7b @ 1 [ 11.282499] initcall acpi_thermal_init+0x0/0x7b returned 0 after 46 usecs [ 11.289477] calling acpi_battery_init+0x0/0x16 @ 1 [ 11.294551] initcall acpi_battery_init+0x0/0x16 returned 0 after 1 usecs [ 11.301442] calling evtchn_init+0x0/0x6e @ 1 [ 11.303012] calling 1_acpi_battery_init_async+0x0/0x3c @ 627 [ 11.303089] initcall 1_acpi_battery_init_async+0x0/0x3c returned 0 after 70 usecs [ 11.319749] initcall evtchn_init+0x0/0x6e returned -19 after 0 usecs [ 11.326293] calling blkif_init+0x0/0x17b @ 1 [ 11.330842] initcall blkif_init+0x0/0x17b returned -19 after 0 usecs [ 11.337386] calling blktap_init+0x0/0xa7 @ 1 [ 11.341934] initcall blktap_init+0x0/0xa7 returned -19 after 0 usecs [ 11.348476] calling netback_init+0x0/0x1f5 @ 1 [ 11.353199] initcall netback_init+0x0/0x1f5 returned -19 after 0 usecs [ 11.359915] calling pciback_init+0x0/0x151 @ 1 [ 11.364639] initcall pciback_init+0x0/0x151 returned -19 after 0 usecs [ 11.371356] calling xenfs_init+0x0/0x6a @ 1 [ 11.375817] xenfs: not registering filesystem on non-xen platform [ 11.382101] initcall xenfs_init+0x0/0x6a returned 0 after 6138 usecs [ 11.388645] calling hypervisor_subsys_init+0x0/0x25 @ 1 [ 11.394147] initcall hypervisor_subsys_init+0x0/0x25 returned -19 after 0 usecs [ 11.401804] calling hyper_sysfs_init+0x0/0xfb @ 1 [ 11.406787] initcall hyper_sysfs_init+0x0/0xfb returned -19 after 0 usecs [ 11.413766] calling rand_initialize+0x0/0x2c @ 1 [ 11.418674] initcall rand_initialize+0x0/0x2c returned 0 after 10 usecs [ 11.425476] calling tty_init+0x0/0xf5 @ 1 [ 11.431973] initcall tty_init+0x0/0xf5 returned 0 after 2153 usecs [ 11.438345] calling pty_init+0x0/0x336 @ 1 [ 11.442771] initcall pty_init+0x0/0x336 returned 0 after 49 usecs [ 11.449057] calling sysrq_init+0x0/0x25 @ 1 [ 11.453523] initcall sysrq_init+0x0/0x25 returned 0 after 3 usecs [ 11.459806] calling xen_hvc_init+0x0/0xde @ 1 [ 11.464443] initcall xen_hvc_init+0x0/0xde returned -19 after 0 usecs [ 11.471075] calling hpet_init+0x0/0x6a @ 1 [ 11.475770] initcall hpet_init+0x0/0x6a returned 0 after 309 usecs [ 11.482143] calling nvram_init+0x0/0x82 @ 1 [ 11.486643] Non-volatile memory driver v1.3 [ 11.491022] initcall nvram_init+0x0/0x82 returned 0 after 4310 usecs [ 11.497566] calling mod_init+0x0/0x220 @ 1 [ 11.502015] initcall mod_init+0x0/0x220 returned -19 after 68 usecs [ 11.508473] calling mod_init+0x0/0xba @ 1 [ 11.516865] initcall mod_init+0x0/0xba returned -19 after 17 usecs [ 11.523234] calling mod_init+0x0/0x4d @ 1 [ 11.527524] initcall mod_init+0x0/0x4d returned -19 after 0 usecs [ 11.533807] calling agp_init+0x0/0x26 @ 1 [ 11.538096] Linux agpgart interface v0.103 [ 11.542386] initcall agp_init+0x0/0x26 returned 0 after 4189 usecs [ 11.548756] calling agp_intel_init+0x0/0x29 @ 1 [ 11.553601] initcall agp_intel_init+0x0/0x29 returned 0 after 35 usecs [ 11.560320] calling drm_core_init+0x0/0x11f @ 1 [ 11.565169] [drm] Initialized drm 1.1.0 20060810 [ 11.569981] initcall drm_core_init+0x0/0x11f returned 0 after 4739 usecs [ 11.576870] calling i915_init+0x0/0x4d @ 1 [ 11.581312] initcall i915_init+0x0/0x4d returned 0 after 64 usecs [ 11.587597] calling cn_proc_init+0x0/0x3d @ 1 [ 11.592235] initcall cn_proc_init+0x0/0x3d returned 0 after 1 usecs [ 11.598691] calling serial8250_init+0x0/0x143 @ 1 [ 11.603673] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 11.610243] async_waiting @ 1 [ 11.613407] async_continuing @ 1 after 0 usec [ 11.739832] async_waiting @ 1 [ 11.742993] async_continuing @ 1 after 0 usec ˜[ 11.868834] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 11.875145] async_waiting @ 1 [ 11.878307] async_continuing @ 1 after 0 usec [ 12.004752] async_waiting @ 1 [ 12.007913] async_continuing @ 1 after 0 usec [ 12.133755] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 12.140094] initcall serial8250_init+0x0/0x143 returned 0 after 524004 usecs [ 12.147334] calling serial8250_pnp_init+0x0/0x12 @ 1 [ 12.152763] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 12.158685] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 12.164527] initcall serial8250_pnp_init+0x0/0x12 returned 0 after 11671 usecs [ 12.172098] calling serial8250_pci_init+0x0/0x1b @ 1 [ 12.177394] initcall serial8250_pci_init+0x0/0x1b returned 0 after 50 usecs [ 12.184546] calling topology_sysfs_init+0x0/0x50 @ 1 [ 12.189806] initcall topology_sysfs_init+0x0/0x50 returned 0 after 15 usecs [ 12.196957] calling brd_init+0x0/0x199 @ 1 [ 12.202738] brd: module loaded [ 12.205991] initcall brd_init+0x0/0x199 returned 0 after 4549 usecs [ 12.212448] calling loop_init+0x0/0x1b2 @ 1 [ 12.217619] loop: module loaded [ 12.220959] initcall loop_init+0x0/0x1b2 returned 0 after 3953 usecs [ 12.227503] calling xlblk_init+0x0/0x7a @ 1 [ 12.231966] initcall xlblk_init+0x0/0x7a returned -19 after 0 usecs [ 12.238423] calling mac_hid_init+0x0/0x8e @ 1 [ 12.243118] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 12.251221] initcall mac_hid_init+0x0/0x8e returned 0 after 7970 usecs [ 12.257937] calling spi_transport_init+0x0/0x79 @ 1 [ 12.263145] initcall spi_transport_init+0x0/0x79 returned 0 after 49 usecs [ 12.270210] calling fc_transport_init+0x0/0x8a @ 1 [ 12.275371] initcall fc_transport_init+0x0/0x8a returned 0 after 89 usecs [ 12.282348] calling init_sd+0x0/0xea @ 1 [ 12.286616] initcall init_sd+0x0/0xea returned 0 after 62 usecs [ 12.292727] calling init_sr+0x0/0x46 @ 1 [ 12.296957] initcall init_sr+0x0/0x46 returned 0 after 24 usecs [ 12.303069] calling init_sg+0x0/0x15a @ 1 [ 12.307392] initcall init_sg+0x0/0x15a returned 0 after 32 usecs [ 12.313589] calling ahci_init+0x0/0x1b @ 1 [ 12.317978] ahci 0000:00:1f.2: version 3.0 [ 12.322275] alloc irq_desc for 20 on node -1 [ 12.326909] alloc kstat_irqs on node -1 [ 12.331113] IOAPIC[0]: Set routing entry (8-20 -> 0xd1 -> IRQ 20 Mode:1 Active:1) [ 12.338944] ahci 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 12.345945] alloc irq_desc for 83 on node -1 [ 12.350579] alloc kstat_irqs on node -1 [ 12.354786] ahci 0000:00:1f.2: irq 83 for MSI/MSI-X [ 12.359912] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27 impl SATA mode [ 12.368437] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems [ 12.375070] ahci 0000:00:1f.2: setting latency timer to 64 [ 12.386581] scsi0 : ahci [ 12.389414] scsi1 : ahci [ 12.392219] scsi2 : ahci [ 12.395028] scsi3 : ahci [ 12.397834] scsi4 : ahci [ 12.400643] scsi5 : ahci [ 12.403438] ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 83 [ 12.411182] ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 83 [ 12.418925] ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 83 [ 12.426666] ata4: DUMMY [ 12.429308] ata5: DUMMY [ 12.431950] ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 83 [ 12.439710] calling 2_async_port_probe+0x0/0xb3 @ 795 [ 12.439730] calling 3_async_port_probe+0x0/0xb3 @ 797 [ 12.439754] calling 4_async_port_probe+0x0/0xb3 @ 799 [ 12.439759] calling 5_async_port_probe+0x0/0xb3 @ 796 [ 12.439778] async_waiting @ 796 [ 12.439781] calling 6_async_port_probe+0x0/0xb3 @ 800 [ 12.439786] initcall ahci_init+0x0/0x1b returned 0 after 118999 usecs [ 12.439788] async_waiting @ 800 [ 12.439790] calling piix_init+0x0/0x29 @ 1 [ 12.439798] calling 7_async_port_probe+0x0/0xb3 @ 801 [ 12.439832] initcall piix_init+0x0/0x29 returned 0 after 37 usecs [ 12.439834] calling amd_init+0x0/0x1b @ 1 [ 12.439866] initcall amd_init+0x0/0x1b returned 0 after 28 usecs [ 12.439868] calling mpiix_init+0x0/0x1b @ 1 [ 12.439899] initcall mpiix_init+0x0/0x1b returned 0 after 27 usecs [ 12.439902] calling oldpiix_init+0x0/0x1b @ 1 [ 12.439932] initcall oldpiix_init+0x0/0x1b returned 0 after 26 usecs [ 12.439934] calling sch_init+0x0/0x1b @ 1 [ 12.439965] initcall sch_init+0x0/0x1b returned 0 after 27 usecs [ 12.439968] calling ata_generic_init+0x0/0x1b @ 1 [ 12.440001] initcall ata_generic_init+0x0/0x1b returned 0 after 29 usecs [ 12.440004] calling e1000_init_module+0x0/0x87 @ 1 [ 12.440005] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 12.440007] Copyright (c) 1999-2006 Intel Corporation. [ 12.440044] initcall e1000_init_module+0x0/0x87 returned 0 after 36 usecs [ 12.440046] calling e1000_init_module+0x0/0x6b @ 1 [ 12.440048] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 12.440049] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 12.440087] initcall e1000_init_module+0x0/0x6b returned 0 after 37 usecs [ 12.440090] calling ne2k_pci_init+0x0/0x1b @ 1 [ 12.440121] initcall ne2k_pci_init+0x0/0x1b returned 0 after 27 usecs [ 12.440124] calling e100_init_module+0x0/0x5d @ 1 [ 12.440125] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 12.440127] e100: Copyright(c) 1999-2006 Intel Corporation [ 12.440161] initcall e100_init_module+0x0/0x5d returned 0 after 33 usecs [ 12.440164] calling tg3_init+0x0/0x1b @ 1 [ 12.440174] tg3.c:v3.99 (April 20, 2009) [ 12.440191] tg3 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 12.440200] tg3 0000:06:00.0: setting latency timer to 64 [ 12.441614] tg3 0000:06:00.0: PME# disabled [ 12.448159] eth0: Tigon3 [partno(BCM95761) rev 5761100] (PCI Express) MAC address 00:25:64:a4:69:00 [ 12.448162] eth0: attached PHY is 5761 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 12.448164] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 12.448166] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 12.448198] initcall tg3_init+0x0/0x1b returned 0 after 7845 usecs [ 12.448201] calling bnx2_init+0x0/0x1b @ 1 [ 12.448234] initcall bnx2_init+0x0/0x1b returned 0 after 29 usecs [ 12.448237] calling sky2_init_module+0x0/0x29 @ 1 [ 12.448238] sky2 driver version 1.23 [ 12.448272] initcall sky2_init_module+0x0/0x29 returned 0 after 31 usecs [ 12.448274] calling net_olddevs_init+0x0/0x9e @ 1 [ 12.448280] initcall net_olddevs_init+0x0/0x9e returned 0 after 3 usecs [ 12.448283] calling init_nic+0x0/0x1b @ 1 [ 12.448318] initcall init_nic+0x0/0x1b returned 0 after 31 usecs [ 12.448321] calling netif_init+0x0/0x66 @ 1 [ 12.448323] initcall netif_init+0x0/0x66 returned -19 after 0 usecs [ 12.448325] calling rtl8139_init_module+0x0/0x1b @ 1 [ 12.448361] initcall rtl8139_init_module+0x0/0x1b returned 0 after 31 usecs [ 12.448363] calling rtl8169_init_module+0x0/0x1b @ 1 [ 12.448396] initcall rtl8169_init_module+0x0/0x1b returned 0 after 28 usecs [ 12.448398] calling init_ath5k_pci+0x0/0x38 @ 1 [ 12.448433] initcall init_ath5k_pci+0x0/0x38 returned 0 after 31 usecs [ 12.448436] calling init_netconsole+0x0/0x214 @ 1 [ 12.448438] console [netcon0] enabled [ 12.799181] netconsole: network logging started [ 12.803911] initcall init_netconsole+0x0/0x214 returned 0 after 347245 usecs [ 12.811149] calling fusion_init+0x0/0x13b @ 1 [ 12.815786] Fusion MPT base driver 3.04.10 [ 12.820075] Copyright (c) 1999-2008 LSI Corporation [ 12.825150] initcall fusion_init+0x0/0x13b returned 0 after 9145 usecs [ 12.831867] calling mptfc_init+0x0/0xf3 @ 1 [ 12.836329] Fusion MPT FC Host driver 3.04.10 [ 12.840915] initcall mptfc_init+0x0/0xf3 returned 0 after 4478 usecs [ 12.847460] calling mptctl_init+0x0/0x11d @ 1 [ 12.852096] Fusion MPT misc device (ioctl) driver 3.04.10 [ 12.857719] mptctl: Registered with Fusion MPT base driver [ 12.863396] mptctl: /dev/mptctl @ (major,minor=10,220) [ 12.868725] initcall mptctl_init+0x0/0x11d returned 0 after 16242 usecs [ 12.875531] calling cdrom_init+0x0/0xd @ 1 [ 12.879924] initcall cdrom_init+0x0/0xd returned 0 after 14 usecs [ 12.886207] calling nonstatic_sysfs_init+0x0/0x12 @ 1 [ 12.891538] initcall nonstatic_sysfs_init+0x0/0x12 returned 0 after 0 usecs [ 12.898689] calling yenta_socket_init+0x0/0x1b @ 1 [ 12.901587] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 12.901613] ata2: SATA link down (SStatus 4 SControl 300) [ 12.901621] async_waiting @ 797 [ 12.901636] ata6: SATA link down (SStatus 0 SControl 300) [ 12.901642] async_waiting @ 801 [ 12.928012] initcall yenta_socket_init+0x0/0x1b returned 0 after 38 usecs [ 12.939079] calling mon_init+0x0/0x104 @ 1 [ 12.939082] ata3.00: ATAPI: TSSTcorp DVD+/-RW TS-H653G, DW10, max UDMA/100, ATAPI AN [ 12.939093] ata3.00: applying bridge limits [ 12.955987] initcall mon_init+0x0/0x104 returned 0 after 66 usecs [ 12.962276] calling ehci_hcd_init+0x0/0xe7 @ 1 [ 12.967003] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 12.967023] ata3.00: configured for UDMA/100 [ 12.978184] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96 [ 12.984399] alloc irq_desc for 22 on node -1 [ 12.989032] alloc kstat_irqs on node -1 [ 12.993240] IOAPIC[0]: Set routing entry (8-22 -> 0xe1 -> IRQ 22 Mode:1 Active:1) [ 12.993253] async_waiting @ 799 [ 13.004404] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 13.011734] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 13.017760] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 13.023191] /root/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file 'devices' [ 13.033282] /root/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 13.043065] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 13.050814] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 13.060120] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr [ 13.068832] ehci_hcd 0000:00:1a.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT [ 13.081946] ehci_hcd 0000:00:1a.7: debug port 1 [ 13.086671] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 13.093647] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 13.099592] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf7ffe000 [ 13.103341] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.111814] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 13.121036] ata1.00: ATA-8: WDC WD3200AAKS-75L9A0, 02.03E02, max UDMA/133 [ 13.124920] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 13.130318] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 13.130339] usb usb1: default language 0x0409 [ 13.130345] usb usb1: udev 1, busnum 1, minor = 0 [ 13.130347] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 13.130349] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.130351] usb usb1: Product: EHCI Host Controller [ 13.130352] usb usb1: Manufacturer: Linux 2.6.31.12 ehci_hcd [ 13.130354] usb usb1: SerialNumber: 0000:00:1a.7 [ 13.130390] usb usb1: uevent [ 13.136461] usb usb1: usb_probe_device [ 13.136463] usb usb1: configuration #1 chosen from 1 choice [ 13.136470] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 13.136482] usb 1-0:1.0: uevent [ 13.136509] hub 1-0:1.0: usb_probe_interface [ 13.136510] hub 1-0:1.0: usb_probe_interface - got id [ 13.136512] hub 1-0:1.0: USB hub found [ 13.136518] hub 1-0:1.0: 6 ports detected [ 13.136520] hub 1-0:1.0: standalone hub [ 13.136521] hub 1-0:1.0: no power switching (usb 1.0) [ 13.136522] hub 1-0:1.0: individual port over-current protection [ 13.136524] hub 1-0:1.0: power on to power good time: 20ms [ 13.136527] hub 1-0:1.0: local power source is good [ 13.136529] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 13.136561] /root/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 13.136587] alloc irq_desc for 23 on node -1 [ 13.136589] alloc kstat_irqs on node -1 [ 13.136592] IOAPIC[0]: Set routing entry (8-23 -> 0xe9 -> IRQ 23 Mode:1 Active:1) [ 13.136596] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 13.136607] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 13.136610] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 13.136616] /root/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002' [ 13.136659] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 13.136666] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 13.136671] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr [ 13.136685] ehci_hcd 0000:00:1d.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT [ 13.140578] ehci_hcd 0000:00:1d.7: debug port 1 [ 13.140583] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 13.140585] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 13.140597] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000 [ 13.140601] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 13.144472] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 13.150313] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 13.150330] usb usb2: default language 0x0409 [ 13.150335] usb usb2: udev 1, busnum 2, minor = 128 [ 13.150337] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 13.150339] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.150341] usb usb2: Product: EHCI Host Controller [ 13.150342] usb usb2: Manufacturer: Linux 2.6.31.12 ehci_hcd [ 13.150344] usb usb2: SerialNumber: 0000:00:1d.7 [ 13.150375] usb usb2: uevent [ 13.150404] usb usb2: usb_probe_device [ 13.150406] usb usb2: configuration #1 chosen from 1 choice [ 13.150412] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 13.150423] usb 2-0:1.0: uevent [ 13.150450] hub 2-0:1.0: usb_probe_interface [ 13.150452] hub 2-0:1.0: usb_probe_interface - got id [ 13.150453] hub 2-0:1.0: USB hub found [ 13.150458] hub 2-0:1.0: 6 ports detected [ 13.150459] hub 2-0:1.0: standalone hub [ 13.150460] hub 2-0:1.0: no power switching (usb 1.0) [ 13.150462] hub 2-0:1.0: individual port over-current protection [ 13.150463] hub 2-0:1.0: power on to power good time: 20ms [ 13.150466] hub 2-0:1.0: local power source is good [ 13.150468] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 13.150497] /root/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 13.150543] initcall ehci_hcd_init+0x0/0xe7 returned 0 after 179290 usecs [ 13.150546] calling ohci_hcd_mod_init+0x0/0xb9 @ 1 [ 13.150547] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 13.150549] ohci_hcd: block sizes: ed 80 td 96 [ 13.150585] initcall ohci_hcd_mod_init+0x0/0xb9 returned 0 after 35 usecs [ 13.150588] calling uhci_hcd_init+0x0/0x11d @ 1 [ 13.150589] uhci_hcd: USB Universal Host Controller Interface driver [ 13.150651] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.150658] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 13.150660] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 13.150665] /root/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003' [ 13.150708] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 13.150716] uhci_hcd 0000:00:1a.0: detected 2 ports [ 13.150720] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 13.150722] uhci_hcd 0000:00:1a.0: Performing full reset [ 13.150737] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 13.150749] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001f20 [ 13.150776] usb usb3: default language 0x0409 [ 13.150781] usb usb3: udev 1, busnum 3, minor = 256 [ 13.150783] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 13.150785] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.150787] usb usb3: Product: UHCI Host Controller [ 13.150789] usb usb3: Manufacturer: Linux 2.6.31.12 uhci_hcd [ 13.150790] usb usb3: SerialNumber: 0000:00:1a.0 [ 13.150820] usb usb3: uevent [ 13.150847] usb usb3: usb_probe_device [ 13.150848] usb usb3: configuration #1 chosen from 1 choice [ 13.150853] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 13.150865] usb 3-0:1.0: uevent [ 13.150893] hub 3-0:1.0: usb_probe_interface [ 13.150894] hub 3-0:1.0: usb_probe_interface - got id [ 13.150896] hub 3-0:1.0: USB hub found [ 13.150901] hub 3-0:1.0: 2 ports detected [ 13.150902] hub 3-0:1.0: standalone hub [ 13.150903] hub 3-0:1.0: no power switching (usb 1.0) [ 13.150904] hub 3-0:1.0: individual port over-current protection [ 13.150906] hub 3-0:1.0: power on to power good time: 2ms [ 13.150909] hub 3-0:1.0: local power source is good [ 13.150911] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 13.150923] /root/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 13.150952] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 13.150958] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 13.150961] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 13.150965] /root/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '004' [ 13.151012] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 13.151019] uhci_hcd 0000:00:1a.1: detected 2 ports [ 13.151023] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 13.151024] uhci_hcd 0000:00:1a.1: Performing full reset [ 13.151040] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 13.151051] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001f00 [ 13.151077] usb usb4: default language 0x0409 [ 13.151083] usb usb4: udev 1, busnum 4, minor = 384 [ 13.151085] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 13.151087] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.151089] usb usb4: Product: UHCI Host Controller [ 13.151090] usb usb4: Manufacturer: Linux 2.6.31.12 uhci_hcd [ 13.151092] usb usb4: SerialNumber: 0000:00:1a.1 [ 13.151122] usb usb4: uevent [ 13.151148] usb usb4: usb_probe_device [ 13.151150] usb usb4: configuration #1 chosen from 1 choice [ 13.151155] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 13.151167] usb 4-0:1.0: uevent [ 13.151194] hub 4-0:1.0: usb_probe_interface [ 13.151195] hub 4-0:1.0: usb_probe_interface - got id [ 13.151197] hub 4-0:1.0: USB hub found [ 13.151202] hub 4-0:1.0: 2 ports detected [ 13.151203] hub 4-0:1.0: standalone hub [ 13.151204] hub 4-0:1.0: no power switching (usb 1.0) [ 13.151205] hub 4-0:1.0: individual port over-current protection [ 13.151207] hub 4-0:1.0: power on to power good time: 2ms [ 13.151210] hub 4-0:1.0: local power source is good [ 13.151212] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 13.151225] /root/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 13.151255] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 13.151261] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 13.151264] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 13.151268] /root/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '005' [ 13.151311] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 13.151317] uhci_hcd 0000:00:1a.2: detected 2 ports [ 13.151321] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 13.151323] uhci_hcd 0000:00:1a.2: Performing full reset [ 13.151339] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 13.151343] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00001c00 [ 13.151375] usb usb5: default language 0x0409 [ 13.151380] usb usb5: udev 1, busnum 5, minor = 512 [ 13.151382] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 13.151384] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.151386] usb usb5: Product: UHCI Host Controller [ 13.151387] usb usb5: Manufacturer: Linux 2.6.31.12 uhci_hcd [ 13.151389] usb usb5: SerialNumber: 0000:00:1a.2 [ 13.151419] usb usb5: uevent [ 13.151450] usb usb5: usb_probe_device [ 13.151452] usb usb5: configuration #1 chosen from 1 choice [ 13.151458] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 13.151470] usb 5-0:1.0: uevent [ 13.151498] hub 5-0:1.0: usb_probe_interface [ 13.151499] hub 5-0:1.0: usb_probe_interface - got id [ 13.151501] hub 5-0:1.0: USB hub found [ 13.151505] hub 5-0:1.0: 2 ports detected [ 13.151506] hub 5-0:1.0: standalone hub [ 13.151508] hub 5-0:1.0: no power switching (usb 1.0) [ 13.151509] hub 5-0:1.0: individual port over-current protection [ 13.151510] hub 5-0:1.0: power on to power good time: 2ms [ 13.151513] hub 5-0:1.0: local power source is good [ 13.151515] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 13.151527] /root/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 13.151558] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 13.151565] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 13.151568] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 13.151573] /root/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '006' [ 13.151618] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 13.151625] uhci_hcd 0000:00:1d.0: detected 2 ports [ 13.151629] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 13.151631] uhci_hcd 0000:00:1d.0: Performing full reset [ 13.151647] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 13.151652] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001f80 [ 13.151678] usb usb6: default language 0x0409 [ 13.151683] usb usb6: udev 1, busnum 6, minor = 640 [ 13.151685] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 13.151687] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.151689] usb usb6: Product: UHCI Host Controller [ 13.151691] usb usb6: Manufacturer: Linux 2.6.31.12 uhci_hcd [ 13.151692] usb usb6: SerialNumber: 0000:00:1d.0 [ 13.151722] usb usb6: uevent [ 13.151749] usb usb6: usb_probe_device [ 13.151751] usb usb6: configuration #1 chosen from 1 choice [ 13.151756] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 13.151767] usb 6-0:1.0: uevent [ 13.151794] hub 6-0:1.0: usb_probe_interface [ 13.151796] hub 6-0:1.0: usb_probe_interface - got id [ 13.151797] hub 6-0:1.0: USB hub found [ 13.151802] hub 6-0:1.0: 2 ports detected [ 13.151803] hub 6-0:1.0: standalone hub [ 13.151804] hub 6-0:1.0: no power switching (usb 1.0) [ 13.151805] hub 6-0:1.0: individual port over-current protection [ 13.151807] hub 6-0:1.0: power on to power good time: 2ms [ 13.151810] hub 6-0:1.0: local power source is good [ 13.151812] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 13.151824] /root/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 13.151852] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 13.151857] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 13.151860] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 13.151864] /root/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '007' [ 13.151908] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 13.151916] uhci_hcd 0000:00:1d.1: detected 2 ports [ 13.151919] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 13.151921] uhci_hcd 0000:00:1d.1: Performing full reset [ 13.151936] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 13.151941] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001f60 [ 13.151967] usb usb7: default language 0x0409 [ 13.151972] usb usb7: udev 1, busnum 7, minor = 768 [ 13.151974] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 13.151976] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.151978] usb usb7: Product: UHCI Host Controller [ 13.151979] usb usb7: Manufacturer: Linux 2.6.31.12 uhci_hcd [ 13.151981] usb usb7: SerialNumber: 0000:00:1d.1 [ 13.152010] usb usb7: uevent [ 13.152042] usb usb7: usb_probe_device [ 13.152044] usb usb7: configuration #1 chosen from 1 choice [ 13.152049] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 13.152061] usb 7-0:1.0: uevent [ 13.152089] hub 7-0:1.0: usb_probe_interface [ 13.152090] hub 7-0:1.0: usb_probe_interface - got id [ 13.152092] hub 7-0:1.0: USB hub found [ 13.152096] hub 7-0:1.0: 2 ports detected [ 13.152098] hub 7-0:1.0: standalone hub [ 13.152099] hub 7-0:1.0: no power switching (usb 1.0) [ 13.152100] hub 7-0:1.0: individual port over-current protection [ 13.152102] hub 7-0:1.0: power on to power good time: 2ms [ 13.152105] hub 7-0:1.0: local power source is good [ 13.152106] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 13.152119] /root/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 13.152149] alloc irq_desc for 18 on node -1 [ 13.152151] alloc kstat_irqs on node -1 [ 13.152154] IOAPIC[0]: Set routing entry (8-18 -> 0x42 -> IRQ 18 Mode:1 Active:1) [ 13.152158] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 13.152164] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 13.152166] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 13.152171] /root/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '008' [ 13.152221] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 13.152229] uhci_hcd 0000:00:1d.2: detected 2 ports [ 13.152233] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 13.152234] uhci_hcd 0000:00:1d.2: Performing full reset [ 13.152250] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 13.152261] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001f40 [ 13.152288] usb usb8: default language 0x0409 [ 13.152294] usb usb8: udev 1, busnum 8, minor = 896 [ 13.152296] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 13.152298] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.152299] usb usb8: Product: UHCI Host Controller [ 13.152301] usb usb8: Manufacturer: Linux 2.6.31.12 uhci_hcd [ 13.152302] usb usb8: SerialNumber: 0000:00:1d.2 [ 13.152332] usb usb8: uevent [ 13.152361] usb usb8: usb_probe_device [ 13.152363] usb usb8: configuration #1 chosen from 1 choice [ 13.152368] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 13.152386] usb 8-0:1.0: uevent [ 13.152416] hub 8-0:1.0: usb_probe_interface [ 13.152417] hub 8-0:1.0: usb_probe_interface - got id [ 13.152419] hub 8-0:1.0: USB hub found [ 13.152427] hub 8-0:1.0: 2 ports detected [ 13.152428] hub 8-0:1.0: standalone hub [ 13.152429] hub 8-0:1.0: no power switching (usb 1.0) [ 13.152431] hub 8-0:1.0: individual port over-current protection [ 13.152432] hub 8-0:1.0: power on to power good time: 2ms [ 13.152435] hub 8-0:1.0: local power source is good [ 13.152437] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 13.152450] /root/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 13.152507] initcall uhci_hcd_init+0x0/0x11d returned 0 after 1871 usecs [ 13.152510] calling usblp_init+0x0/0x1b @ 1 [ 13.152544] usbcore: registered new interface driver usblp [ 13.152548] initcall usblp_init+0x0/0x1b returned 0 after 33 usecs [ 13.152550] calling usb_stor_init+0x0/0x50 @ 1 [ 13.152551] Initializing USB Mass Storage driver... [ 13.152607] usbcore: registered new interface driver usb-storage [ 13.152609] USB Mass Storage support registered. [ 13.152612] initcall usb_stor_init+0x0/0x50 returned 0 after 58 usecs [ 13.152615] calling usb_usual_init+0x0/0x3d @ 1 [ 13.152667] usbcore: registered new interface driver libusual [ 13.152670] initcall usb_usual_init+0x0/0x3d returned 0 after 51 usecs [ 13.152673] calling i8042_init+0x0/0x39e @ 1 [ 13.152780] PNP: No PS/2 controller found. Probing ports directly. [ 13.236292] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT [ 13.236295] hub 1-0:1.0: port 1: status 0501 change 0001 [ 13.236303] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT [ 13.236306] hub 1-0:1.0: port 2: status 0501 change 0001 [ 13.250301] uhci_hcd 0000:00:1a.0: port 1 portsc 008a,00 [ 13.250313] uhci_hcd 0000:00:1a.0: port 2 portsc 008a,00 [ 13.250334] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 13.250337] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 13.251373] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 13.251375] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 13.251378] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 13.252353] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 13.336258] hub 1-0:1.0: state 7 ports 6 chg 0006 evt 0000 [ 13.336263] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 13.336271] ehci_hcd 0000:00:1a.7: port 1 low speed --> companion [ 13.387242] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC [ 13.387262] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 13.387266] ehci_hcd 0000:00:1a.7: port 2 low speed --> companion [ 13.403535] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 13.403542] initcall i8042_init+0x0/0x39e returned 0 after 245060 usecs [ 13.403545] calling serport_init+0x0/0x34 @ 1 [ 13.403548] initcall serport_init+0x0/0x34 returned 0 after 0 usecs [ 13.403550] calling mousedev_init+0x0/0x62 @ 1 [ 13.403645] mice: PS/2 mouse device common for all mice [ 13.403648] initcall mousedev_init+0x0/0x62 returned 0 after 92 usecs [ 13.403651] calling evdev_init+0x0/0x12 @ 1 [ 13.403751] initcall evdev_init+0x0/0x12 returned 0 after 95 usecs [ 13.403754] calling atkbd_init+0x0/0x27 @ 1 [ 13.403789] initcall atkbd_init+0x0/0x27 returned 0 after 31 usecs [ 13.403791] calling psmouse_init+0x0/0x6f @ 1 [ 13.403852] initcall psmouse_init+0x0/0x6f returned 0 after 56 usecs [ 13.403855] calling xenkbd_init+0x0/0x58 @ 1 [ 13.403857] initcall xenkbd_init+0x0/0x58 returned -19 after 0 usecs [ 13.403860] calling cmos_init+0x0/0x6a @ 1 [ 13.403883] rtc_cmos 00:05: RTC can wake from S4 [ 13.403932] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 13.403963] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs [ 13.403991] initcall cmos_init+0x0/0x6a returned 0 after 125 usecs [ 13.403994] calling i2c_i801_init+0x0/0x1b @ 1 [ 13.404007] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 13.404090] initcall i2c_i801_init+0x0/0x1b returned 0 after 90 usecs [ 13.404093] calling dm_init+0x0/0x46 @ 1 [ 13.404296] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 13.404300] initcall dm_init+0x0/0x46 returned 0 after 199 usecs [ 13.404303] calling dm_mirror_init+0x0/0x79 @ 1 [ 13.404352] initcall dm_mirror_init+0x0/0x79 returned 0 after 45 usecs [ 13.404354] calling dm_dirty_log_init+0x0/0x59 @ 1 [ 13.404357] initcall dm_dirty_log_init+0x0/0x59 returned 0 after 0 usecs [ 13.404360] calling dm_zero_init+0x0/0x31 @ 1 [ 13.404363] initcall dm_zero_init+0x0/0x31 returned 0 after 0 usecs [ 13.404365] calling cpufreq_gov_dbs_init+0x0/0xab @ 1 [ 13.404414] initcall cpufreq_gov_dbs_init+0x0/0xab returned 0 after 45 usecs [ 13.404417] calling init_ladder+0x0/0x12 @ 1 [ 13.404824] cpuidle: using governor ladder [ 13.404827] initcall init_ladder+0x0/0x12 returned 0 after 397 usecs [ 13.404830] calling init_menu+0x0/0x12 @ 1 [ 14.377010] usb usb4: suspend_rh (auto-stop) [ 14.377034] usb usb5: suspend_rh (auto-stop) [ 14.377059] usb usb6: suspend_rh (auto-stop) [ 14.377083] usb usb7: suspend_rh (auto-stop) [ 14.377108] usb usb8: suspend_rh (auto-stop) [ 15.141146] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC [ 15.141169] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 15.142586] cpuidle: using governor menu [ 15.142590] initcall init_menu+0x0/0x12 returned 0 after 1697539 usecs [ 15.142593] calling efivars_init+0x0/0x1ef @ 1 [ 15.142596] initcall efivars_init+0x0/0x1ef returned -19 after 0 usecs [ 15.142599] calling hid_init+0x0/0x48 @ 1 [ 15.142656] initcall hid_init+0x0/0x48 returned 0 after 52 usecs [ 15.142660] calling a4_init+0x0/0x1b @ 1 [ 15.142689] initcall a4_init+0x0/0x1b returned 0 after 25 usecs [ 15.142692] calling apple_init+0x0/0x38 @ 1 [ 15.142726] initcall apple_init+0x0/0x38 returned 0 after 30 usecs [ 15.142728] calling belkin_init+0x0/0x1b @ 1 [ 15.142756] initcall belkin_init+0x0/0x1b returned 0 after 24 usecs [ 15.142759] calling ch_init+0x0/0x1b @ 1 [ 15.142785] initcall ch_init+0x0/0x1b returned 0 after 23 usecs [ 15.142788] calling ch_init+0x0/0x1b @ 1 [ 15.142815] initcall ch_init+0x0/0x1b returned 0 after 23 usecs [ 15.142817] calling cp_init+0x0/0x1b @ 1 [ 15.142849] initcall cp_init+0x0/0x1b returned 0 after 28 usecs [ 15.142852] calling dr_init+0x0/0x1b @ 1 [ 15.142881] initcall dr_init+0x0/0x1b returned 0 after 24 usecs [ 15.142883] calling ez_init+0x0/0x1b @ 1 [ 15.142916] initcall ez_init+0x0/0x1b returned 0 after 28 usecs [ 15.142918] calling gyration_init+0x0/0x1b @ 1 [ 15.142949] initcall gyration_init+0x0/0x1b returned 0 after 26 usecs [ 15.142952] calling ks_init+0x0/0x1b @ 1 [ 15.142982] initcall ks_init+0x0/0x1b returned 0 after 26 usecs [ 15.142984] calling kye_init+0x0/0x1b @ 1 [ 15.143013] initcall kye_init+0x0/0x1b returned 0 after 24 usecs [ 15.143015] calling lg_init+0x0/0x1b @ 1 [ 15.143043] initcall lg_init+0x0/0x1b returned 0 after 24 usecs [ 15.143046] calling ms_init+0x0/0x1b @ 1 [ 15.143075] initcall ms_init+0x0/0x1b returned 0 after 25 usecs [ 15.143077] calling mr_init+0x0/0x1b @ 1 [ 15.143106] initcall mr_init+0x0/0x1b returned 0 after 24 usecs [ 15.143108] calling ntrig_init+0x0/0x1b @ 1 [ 15.143140] initcall ntrig_init+0x0/0x1b returned 0 after 27 usecs [ 15.143143] calling pl_init+0x0/0x1b @ 1 [ 15.143171] initcall pl_init+0x0/0x1b returned 0 after 24 usecs [ 15.143173] calling pl_init+0x0/0x1b @ 1 [ 15.143203] initcall pl_init+0x0/0x1b returned 0 after 25 usecs [ 15.143206] calling samsung_init+0x0/0x1b @ 1 [ 15.143236] initcall samsung_init+0x0/0x1b returned 0 after 26 usecs [ 15.143239] calling sjoy_init+0x0/0x1b @ 1 [ 15.143271] initcall sjoy_init+0x0/0x1b returned 0 after 27 usecs [ 15.143273] calling sony_init+0x0/0x1b @ 1 [ 15.143301] initcall sony_init+0x0/0x1b returned 0 after 24 usecs [ 15.143304] calling sp_init+0x0/0x1b @ 1 [ 15.143332] initcall sp_init+0x0/0x1b returned 0 after 24 usecs [ 15.143335] calling ga_init+0x0/0x1b @ 1 [ 15.143364] initcall ga_init+0x0/0x1b returned 0 after 24 usecs [ 15.143366] calling tm_init+0x0/0x1b @ 1 [ 15.143396] initcall tm_init+0x0/0x1b returned 0 after 25 usecs [ 15.143398] calling ts_init+0x0/0x1b @ 1 [ 15.143430] initcall ts_init+0x0/0x1b returned 0 after 27 usecs [ 15.143433] calling zp_init+0x0/0x1b @ 1 [ 15.143461] initcall zp_init+0x0/0x1b returned 0 after 24 usecs [ 15.143464] calling hid_init+0x0/0xc7 @ 1 [ 15.143538] usbcore: registered new interface driver hiddev [ 15.143570] usbcore: registered new interface driver usbhid [ 15.143573] usbhid: v2.6:USB HID core driver [ 15.143576] initcall hid_init+0x0/0xc7 returned 0 after 106 usecs [ 15.143579] calling eeepc_laptop_init+0x0/0x4b3 @ 1 [ 15.143648] initcall eeepc_laptop_init+0x0/0x4b3 returned -19 after 64 usecs [ 15.143651] calling init_soundcore+0x0/0x7e @ 1 [ 15.143681] initcall init_soundcore+0x0/0x7e returned 0 after 25 usecs [ 15.143684] calling alsa_sound_init+0x0/0x87 @ 1 [ 15.143698] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 15.143701] initcall alsa_sound_init+0x0/0x87 returned 0 after 13 usecs [ 15.143703] calling alsa_hwdep_init+0x0/0x64 @ 1 [ 15.143708] initcall alsa_hwdep_init+0x0/0x64 returned 0 after 1 usecs [ 15.143711] calling alsa_timer_init+0x0/0x15c @ 1 [ 15.143758] initcall alsa_timer_init+0x0/0x15c returned 0 after 42 usecs [ 15.143760] calling snd_hrtimer_init+0x0/0xf7 @ 1 [ 15.143764] initcall snd_hrtimer_init+0x0/0xf7 returned 0 after 1 usecs [ 15.143767] calling alsa_pcm_init+0x0/0x6c @ 1 [ 15.143771] initcall alsa_pcm_init+0x0/0x6c returned 0 after 1 usecs [ 15.143774] calling snd_mem_init+0x0/0x2c @ 1 [ 15.143778] initcall snd_mem_init+0x0/0x2c returned 0 after 1 usecs [ 15.143781] calling alsa_mixer_oss_init+0x0/0x3c @ 1 [ 15.143784] initcall alsa_mixer_oss_init+0x0/0x3c returned 0 after 0 usecs [ 15.143786] calling alsa_pcm_oss_init+0x0/0x87 @ 1 [ 15.143790] initcall alsa_pcm_oss_init+0x0/0x87 returned 0 after 0 usecs [ 15.143792] calling alsa_seq_init+0x0/0x4c @ 1 [ 15.143841] initcall alsa_seq_init+0x0/0x4c returned 0 after 44 usecs [ 15.143844] calling alsa_seq_device_init+0x0/0x5b @ 1 [ 15.143848] initcall alsa_seq_device_init+0x0/0x5b returned 0 after 1 usecs [ 15.143851] calling alsa_seq_midi_event_init+0x0/0x8 @ 1 [ 15.143854] initcall alsa_seq_midi_event_init+0x0/0x8 returned 0 after 0 usecs [ 15.143856] calling alsa_seq_oss_init+0x0/0x167 @ 1 [ 15.144766] initcall alsa_seq_oss_init+0x0/0x167 returned 0 after 885 usecs [ 15.144770] calling alsa_seq_dummy_init+0x0/0xbd @ 1 [ 15.144777] initcall alsa_seq_dummy_init+0x0/0xbd returned 0 after 4 usecs [ 15.144780] calling patch_realtek_init+0x0/0x12 @ 1 [ 15.144783] initcall patch_realtek_init+0x0/0x12 returned 0 after 0 usecs [ 15.144786] calling patch_cmedia_init+0x0/0x12 @ 1 [ 15.144789] initcall patch_cmedia_init+0x0/0x12 returned 0 after 0 usecs [ 15.144791] calling patch_analog_init+0x0/0x12 @ 1 [ 15.144794] initcall patch_analog_init+0x0/0x12 returned 0 after 0 usecs [ 15.144797] calling patch_sigmatel_init+0x0/0x12 @ 1 [ 15.144799] initcall patch_sigmatel_init+0x0/0x12 returned 0 after 0 usecs [ 15.144802] calling patch_si3054_init+0x0/0x12 @ 1 [ 15.144805] initcall patch_si3054_init+0x0/0x12 returned 0 after 0 usecs [ 15.144808] calling patch_atihdmi_init+0x0/0x12 @ 1 [ 15.144810] initcall patch_atihdmi_init+0x0/0x12 returned 0 after 0 usecs [ 15.144813] calling patch_ca0110_init+0x0/0x12 @ 1 [ 15.144816] initcall patch_ca0110_init+0x0/0x12 returned 0 after 0 usecs [ 15.144819] calling patch_conexant_init+0x0/0x12 @ 1 [ 15.144821] initcall patch_conexant_init+0x0/0x12 returned 0 after 0 usecs [ 15.144824] calling patch_via_init+0x0/0x12 @ 1 [ 15.144827] initcall patch_via_init+0x0/0x12 returned 0 after 0 usecs [ 15.144829] calling patch_nvhdmi_init+0x0/0x12 @ 1 [ 15.144835] initcall patch_nvhdmi_init+0x0/0x12 returned 0 after 0 usecs [ 15.144838] calling patch_intelhdmi_init+0x0/0x12 @ 1 [ 15.144841] initcall patch_intelhdmi_init+0x0/0x12 returned 0 after 0 usecs [ 15.144843] calling alsa_card_azx_init+0x0/0x1b @ 1 [ 15.144897] initcall alsa_card_azx_init+0x0/0x1b returned 0 after 48 usecs [ 15.144900] calling alsa_sound_last_init+0x0/0x6f @ 1 [ 15.144901] ALSA device list: [ 15.144902] No soundcards found. [ 15.144905] initcall alsa_sound_last_init+0x0/0x6f returned 0 after 2 usecs [ 15.144907] calling flow_cache_init+0x0/0x1a7 @ 1 [ 15.144936] initcall flow_cache_init+0x0/0x1a7 returned 0 after 25 usecs [ 15.144938] calling llc_init+0x0/0x20 @ 1 [ 15.144941] initcall llc_init+0x0/0x20 returned 0 after 0 usecs [ 15.144943] calling snap_init+0x0/0x39 @ 1 [ 15.144946] initcall snap_init+0x0/0x39 returned 0 after 0 usecs [ 15.144948] calling rif_init+0x0/0x85 @ 1 [ 15.144964] initcall rif_init+0x0/0x85 returned 0 after 13 usecs [ 15.144966] calling blackhole_module_init+0x0/0x12 @ 1 [ 15.144969] initcall blackhole_module_init+0x0/0x12 returned 0 after 0 usecs [ 15.144972] calling nfnetlink_init+0x0/0x60 @ 1 [ 15.144973] Netfilter messages via NETLINK v0.30. [ 15.144988] initcall nfnetlink_init+0x0/0x60 returned 0 after 13 usecs [ 15.144991] calling nfnetlink_log_init+0x0/0xd6 @ 1 [ 15.144998] initcall nfnetlink_log_init+0x0/0xd6 returned 0 after 4 usecs [ 15.145001] calling nf_conntrack_standalone_init+0x0/0x12 @ 1 [ 15.145003] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 15.145219] initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after 208 usecs [ 15.145221] calling ctnetlink_init+0x0/0x76 @ 1 [ 15.145223] ctnetlink v0.93: registering with nfnetlink. [ 15.145225] initcall ctnetlink_init+0x0/0x76 returned 0 after 1 usecs [ 15.145228] calling nf_conntrack_ftp_init+0x0/0x1dc @ 1 [ 15.145232] initcall nf_conntrack_ftp_init+0x0/0x1dc returned 0 after 1 usecs [ 15.145234] calling nf_conntrack_irc_init+0x0/0x1a8 @ 1 [ 15.145237] initcall nf_conntrack_irc_init+0x0/0x1a8 returned 0 after 0 usecs [ 15.145240] calling nf_conntrack_sip_init+0x0/0x183 @ 1 [ 15.145243] initcall nf_conntrack_sip_init+0x0/0x183 returned 0 after 0 usecs [ 15.145245] calling xt_init+0x0/0x13b @ 1 [ 15.145250] initcall xt_init+0x0/0x13b returned 0 after 2 usecs [ 15.145252] calling tcpudp_mt_init+0x0/0x17 @ 1 [ 15.145255] initcall tcpudp_mt_init+0x0/0x17 returned 0 after 0 usecs [ 15.145257] calling connsecmark_tg_init+0x0/0x12 @ 1 [ 15.145260] initcall connsecmark_tg_init+0x0/0x12 returned 0 after 0 usecs [ 15.145262] calling mark_tg_init+0x0/0x17 @ 1 [ 15.145264] initcall mark_tg_init+0x0/0x17 returned 0 after 0 usecs [ 15.145267] calling nflog_tg_init+0x0/0x12 @ 1 [ 15.145269] initcall nflog_tg_init+0x0/0x12 returned 0 after 0 usecs [ 15.145271] calling secmark_tg_init+0x0/0x12 @ 1 [ 15.145274] initcall secmark_tg_init+0x0/0x12 returned 0 after 0 usecs [ 15.145276] calling tcpmss_tg_init+0x0/0x17 @ 1 [ 15.145278] initcall tcpmss_tg_init+0x0/0x17 returned 0 after 0 usecs [ 15.145281] calling conntrack_mt_init+0x0/0x17 @ 1 [ 15.145283] initcall conntrack_mt_init+0x0/0x17 returned 0 after 0 usecs [ 15.145285] calling mark_mt_init+0x0/0x17 @ 1 [ 15.145288] initcall mark_mt_init+0x0/0x17 returned 0 after 0 usecs [ 15.145290] calling policy_mt_init+0x0/0x17 @ 1 [ 15.145292] initcall policy_mt_init+0x0/0x17 returned 0 after 0 usecs [ 15.145295] calling state_mt_init+0x0/0x17 @ 1 [ 15.145297] initcall state_mt_init+0x0/0x17 returned 0 after 0 usecs [ 15.145299] calling sysctl_ipv4_init+0x0/0x4e @ 1 [ 15.145565] initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 256 usecs [ 15.145567] calling init_syncookies+0x0/0x19 @ 1 [ 15.145592] initcall init_syncookies+0x0/0x19 returned 0 after 21 usecs [ 15.145595] calling tunnel4_init+0x0/0x66 @ 1 [ 15.145597] initcall tunnel4_init+0x0/0x66 returned 0 after 0 usecs [ 15.145601] calling ipv4_netfilter_init+0x0/0x12 @ 1 [ 15.145603] initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 0 usecs [ 15.145606] calling nf_conntrack_l3proto_ipv4_init+0x0/0x14b @ 1 [ 15.145797] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x14b returned 0 after 183 usecs [ 15.145799] calling nf_nat_init+0x0/0x124 @ 1 [ 15.145822] initcall nf_nat_init+0x0/0x124 returned 0 after 19 usecs [ 15.145824] calling nf_defrag_init+0x0/0x17 @ 1 [ 15.145827] initcall nf_defrag_init+0x0/0x17 returned 0 after 0 usecs [ 15.145829] calling nf_nat_ftp_init+0x0/0x21 @ 1 [ 15.145836] initcall nf_nat_ftp_init+0x0/0x21 returned 0 after 0 usecs [ 15.145838] calling nf_nat_irc_init+0x0/0x21 @ 1 [ 15.145841] initcall nf_nat_irc_init+0x0/0x21 returned 0 after 0 usecs [ 15.145843] calling nf_nat_sip_init+0x0/0x9e @ 1 [ 15.145846] initcall nf_nat_sip_init+0x0/0x9e returned 0 after 0 usecs [ 15.145848] calling ip_tables_init+0x0/0xb8 @ 1 [ 15.145854] ip_tables: (C) 2000-2006 Netfilter Core Team [ 15.145856] initcall ip_tables_init+0x0/0xb8 returned 0 after 5 usecs [ 15.145859] calling iptable_filter_init+0x0/0x69 @ 1 [ 15.145868] initcall iptable_filter_init+0x0/0x69 returned 0 after 6 usecs [ 15.145870] calling iptable_mangle_init+0x0/0x41 @ 1 [ 15.145878] initcall iptable_mangle_init+0x0/0x41 returned 0 after 4 usecs [ 15.145881] calling nf_nat_standalone_init+0x0/0x82 @ 1 [ 15.145888] initcall nf_nat_standalone_init+0x0/0x82 returned 0 after 4 usecs [ 15.145890] calling log_tg_init+0x0/0x29 @ 1 [ 15.145893] initcall log_tg_init+0x0/0x29 returned 0 after 0 usecs [ 15.145895] calling masquerade_tg_init+0x0/0x39 @ 1 [ 15.145900] initcall masquerade_tg_init+0x0/0x39 returned 0 after 1 usecs [ 15.145902] calling reject_tg_init+0x0/0x12 @ 1 [ 15.145905] initcall reject_tg_init+0x0/0x12 returned 0 after 0 usecs [ 15.145907] calling ulog_tg_init+0x0/0xf4 @ 1 [ 15.145914] initcall ulog_tg_init+0x0/0xf4 returned 0 after 4 usecs [ 15.145916] calling cubictcp_register+0x0/0x5c @ 1 [ 15.145918] TCP cubic registered [ 15.145921] initcall cubictcp_register+0x0/0x5c returned 0 after 1 usecs [ 15.145923] calling xfrm_user_init+0x0/0x4a @ 1 [ 15.145924] Initializing XFRM netlink socket [ 15.145931] initcall xfrm_user_init+0x0/0x4a returned 0 after 4 usecs [ 15.145933] calling inet6_init+0x0/0x2a6 @ 1 [ 15.146122] NET: Registered protocol family 10 [ 15.147021] initcall inet6_init+0x0/0x2a6 returned 0 after 1058 usecs [ 15.147024] calling ah6_init+0x0/0x66 @ 1 [ 15.147027] initcall ah6_init+0x0/0x66 returned 0 after 0 usecs [ 15.147030] calling esp6_init+0x0/0x66 @ 1 [ 15.147032] initcall esp6_init+0x0/0x66 returned 0 after 0 usecs [ 15.147035] calling xfrm6_transport_init+0x0/0x17 @ 1 [ 15.147037] initcall xfrm6_transport_init+0x0/0x17 returned 0 after 0 usecs [ 15.147040] calling xfrm6_mode_tunnel_init+0x0/0x17 @ 1 [ 15.147043] initcall xfrm6_mode_tunnel_init+0x0/0x17 returned 0 after 0 usecs [ 15.147046] calling xfrm6_beet_init+0x0/0x17 @ 1 [ 15.147048] initcall xfrm6_beet_init+0x0/0x17 returned 0 after 0 usecs [ 15.147051] calling ip6_tables_init+0x0/0xb8 @ 1 [ 15.147058] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 15.147061] initcall ip6_tables_init+0x0/0xb8 returned 0 after 6 usecs [ 15.147063] calling ip6table_filter_init+0x0/0x69 @ 1 [ 15.147073] initcall ip6table_filter_init+0x0/0x69 returned 0 after 6 usecs [ 15.147076] calling ip6table_mangle_init+0x0/0x41 @ 1 [ 15.147084] initcall ip6table_mangle_init+0x0/0x41 returned 0 after 5 usecs [ 15.147087] calling nf_conntrack_l3proto_ipv6_init+0x0/0x11a @ 1 [ 15.147123] initcall nf_conntrack_l3proto_ipv6_init+0x0/0x11a returned 0 after 32 usecs [ 15.147126] calling ipv6header_mt6_init+0x0/0x12 @ 1 [ 15.147129] initcall ipv6header_mt6_init+0x0/0x12 returned 0 after 0 usecs [ 15.147132] calling log_tg6_init+0x0/0x29 @ 1 [ 15.147134] initcall log_tg6_init+0x0/0x29 returned 0 after 0 usecs [ 15.147137] calling reject_tg6_init+0x0/0x12 @ 1 [ 15.147139] initcall reject_tg6_init+0x0/0x12 returned 0 after 0 usecs [ 15.147142] calling sit_init+0x0/0x71 @ 1 [ 15.147143] IPv6 over IPv4 tunneling driver [ 15.147673] initcall sit_init+0x0/0x71 returned 0 after 514 usecs [ 15.147676] calling packet_init+0x0/0x47 @ 1 [ 15.147678] NET: Registered protocol family 17 [ 15.147684] initcall packet_init+0x0/0x47 returned 0 after 4 usecs [ 15.147686] calling br_init+0x0/0xad @ 1 [ 15.147702] initcall br_init+0x0/0xad returned 0 after 12 usecs [ 15.147704] calling init_sunrpc+0x0/0x5d @ 1 [ 15.147874] RPC: Registered udp transport module. [ 15.147875] RPC: Registered tcp transport module. [ 15.147879] initcall init_sunrpc+0x0/0x5d returned 0 after 167 usecs [ 15.147882] calling init_rpcsec_gss+0x0/0x4d @ 1 [ 15.147891] initcall init_rpcsec_gss+0x0/0x4d returned 0 after 5 usecs [ 15.147893] calling init_kerberos_module+0x0/0x2f @ 1 [ 15.147899] initcall init_kerberos_module+0x0/0x2f returned 0 after 2 usecs [ 15.147903] calling severities_debugfs_init+0x0/0x5b @ 1 [ 15.147916] initcall severities_debugfs_init+0x0/0x5b returned 0 after 10 usecs [ 15.147919] calling acpi_cpufreq_init+0x0/0xfd @ 1 [ 16.638592] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0004 [ 16.638669] hub 2-0:1.0: hub_suspend [ 16.638675] usb usb2: bus auto-suspend [ 16.638677] ehci_hcd 0000:00:1d.7: suspend root hub [ 16.638705] hub 4-0:1.0: hub_suspend [ 16.638707] usb usb4: bus auto-suspend [ 16.638709] usb usb4: suspend_rh [ 16.638725] hub 5-0:1.0: hub_suspend [ 16.638727] usb usb5: bus auto-suspend [ 16.638728] usb usb5: suspend_rh [ 16.638744] hub 6-0:1.0: hub_suspend [ 16.638746] usb usb6: bus auto-suspend [ 16.638747] usb usb6: suspend_rh [ 16.638762] hub 7-0:1.0: hub_suspend [ 16.638764] usb usb7: bus auto-suspend [ 16.638766] usb usb7: suspend_rh [ 16.638781] hub 8-0:1.0: hub_suspend [ 16.638783] usb usb8: bus auto-suspend [ 16.638785] usb usb8: suspend_rh [ 16.639117] initcall acpi_cpufreq_init+0x0/0xfd returned 0 after 1456683 usecs [ 16.639120] calling hpet_insert_resource+0x0/0x23 @ 1 [ 16.639125] initcall hpet_insert_resource+0x0/0x23 returned 0 after 2 usecs [ 16.639128] calling update_mp_table+0x0/0x5fa @ 1 [ 16.639131] initcall update_mp_table+0x0/0x5fa returned 0 after 0 usecs [ 16.639134] calling lapic_insert_resource+0x0/0x3f @ 1 [ 16.639137] initcall lapic_insert_resource+0x0/0x3f returned 0 after 0 usecs [ 16.639140] calling init_lapic_nmi_sysfs+0x0/0x39 @ 1 [ 16.639142] initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 0 usecs [ 16.639145] calling io_apic_bug_finalize+0x0/0x1b @ 1 [ 16.639148] initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs [ 16.639151] calling check_early_ioremap_leak+0x0/0x65 @ 1 [ 16.639153] initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs [ 16.639156] calling pat_memtype_list_init+0x0/0x29 @ 1 [ 16.639161] initcall pat_memtype_list_init+0x0/0x29 returned 0 after 3 usecs [ 16.639166] calling init_oops_id+0x0/0x31 @ 1 [ 16.639171] initcall init_oops_id+0x0/0x31 returned 0 after 2 usecs [ 16.639174] calling disable_boot_consoles+0x0/0x3a @ 1 [ 16.639176] initcall disable_boot_consoles+0x0/0x3a returned 0 after 0 usecs [ 16.639180] calling pm_qos_power_init+0x0/0x61 @ 1 [ 16.639349] initcall pm_qos_power_init+0x0/0x61 returned 0 after 162 usecs [ 16.639353] calling software_resume+0x0/0x1d0 @ 1 [ 16.639355] PM: Resume from disk failed. [ 16.639357] initcall software_resume+0x0/0x1d0 returned -2 after 1 usecs [ 16.639360] initcall software_resume+0x0/0x1d0 returned with error code -2 [ 16.639365] calling debugfs_kprobe_init+0x0/0x8a @ 1 [ 16.639373] initcall debugfs_kprobe_init+0x0/0x8a returned 0 after 4 usecs [ 16.639376] calling taskstats_init+0x0/0x95 @ 1 [ 16.639385] registered taskstats version 1 [ 16.639388] initcall taskstats_init+0x0/0x95 returned 0 after 9 usecs [ 16.639390] calling clear_boot_tracer+0x0/0x2d @ 1 [ 16.639393] initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs [ 16.639397] calling max_swapfiles_check+0x0/0x8 @ 1 [ 16.639399] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs [ 16.639402] calling random32_reseed+0x0/0xb3 @ 1 [ 16.639432] initcall random32_reseed+0x0/0xb3 returned 0 after 26 usecs [ 16.639435] calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1 [ 16.639440] initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 1 usecs [ 16.639442] calling pci_sysfs_init+0x0/0x51 @ 1 [ 16.639565] initcall pci_sysfs_init+0x0/0x51 returned 0 after 116 usecs [ 16.639567] calling boot_wait_for_devices+0x0/0x19 @ 1 [ 16.639570] initcall boot_wait_for_devices+0x0/0x19 returned 0 after 0 usecs [ 16.639572] calling seqgen_init+0x0/0xf @ 1 [ 16.639583] initcall seqgen_init+0x0/0xf returned 0 after 8 usecs [ 16.639588] calling late_resume_init+0x0/0x11f @ 1 [ 16.639590] Magic number: 2:86:791 [ 16.639652] initcall late_resume_init+0x0/0x11f returned 0 after 60 usecs [ 16.639657] calling scsi_complete_async_scans+0x0/0x127 @ 1 [ 16.639660] initcall scsi_complete_async_scans+0x0/0x127 returned 0 after 0 usecs [ 16.639663] calling memmap_init+0x0/0xa3 @ 1 [ 16.639693] initcall memmap_init+0x0/0xa3 returned 0 after 26 usecs [ 16.639696] calling pci_mmcfg_late_insert_resources+0x0/0x15f @ 1 [ 16.639700] initcall pci_mmcfg_late_insert_resources+0x0/0x15f returned 0 after 1 usecs [ 16.639703] calling tcp_congestion_default+0x0/0x12 @ 1 [ 16.639706] initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 usecs [ 16.639709] calling ip_auto_config+0x0/0xe67 @ 1 [ 16.639715] initcall ip_auto_config+0x0/0xe67 returned 0 after 4 usecs [ 16.639718] calling initialize_hashrnd+0x0/0x19 @ 1 [ 16.639722] initcall initialize_hashrnd+0x0/0x19 returned 0 after 2 usecs [ 16.639729] async_waiting @ 1 [ 17.080471] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0006 [ 17.086290] uhci_hcd 0000:00:1a.0: port 1 portsc 01a3,00 [ 17.086322] ata1.00: configured for UDMA/133 [ 17.086336] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4 [ 17.086338] ata1: irq_stat 0x00400040, connection status changed [ 17.086345] ata1: hard resetting link [ 17.113055] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s [ 17.223160] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 [ 17.332239] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 17.503020] usb 3-1: skipped 1 descriptor after interface [ 17.514013] usb 3-1: default language 0x0409 [ 17.545004] usb 3-1: udev 2, busnum 3, minor = 257 [ 17.549999] usb 3-1: New USB device found, idVendor=413c, idProduct=2105 [ 17.556894] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 17.564217] usb 3-1: Product: Dell USB Keyboard [ 17.568939] usb 3-1: Manufacturer: Dell [ 17.573009] usb 3-1: uevent [ 17.576368] usb 3-1: usb_probe_device [ 17.580232] usb 3-1: configuration #1 chosen from 1 choice [ 17.606997] usb 3-1: adding 3-1:1.0 (config #1, interface 0) [ 17.627974] usb 3-1:1.0: uevent [ 17.631758] usbhid 3-1:1.0: usb_probe_interface [ 17.636491] usbhid 3-1:1.0: usb_probe_interface - got id [ 17.674549] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3 [ 17.684653] uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 16, phase 8, 118 us [ 17.693235] generic-usb 0003:413C:2105.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1/input0 [ 17.705852] /root/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002' [ 17.715609] uhci_hcd 0000:00:1a.0: port 2 portsc 01a3,00 [ 17.721118] hub 3-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 17.809100] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 17.817297] ata1.00: configured for UDMA/133 [ 17.821807] ata1: EH complete [ 17.825050] async_waiting @ 795 [ 17.828450] async_continuing @ 795 after 0 usec [ 17.833317] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-7 02.0 PQ: 0 ANSI: 5 [ 17.841780] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 17.850484] calling 8_sd_probe_async+0x0/0x1df @ 1004 [ 17.850577] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 17.850680] initcall 2_async_port_probe+0x0/0xb3 returned 0 after 4934572 usecs [ 17.852090] async_continuing @ 797 after 4835897 usec [ 17.852096] initcall 3_async_port_probe+0x0/0xb3 returned 0 after 5287102 usecs [ 17.855088] async_continuing @ 799 after 4749315 usec [ 17.855637] scsi 2:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-H653G DW10 PQ: 0 ANSI: 5 [ 17.859213] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 17.859216] Uniform CD-ROM driver Revision: 3.20 [ 17.859486] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 17.859654] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 17.859750] initcall 4_async_port_probe+0x0/0xb3 returned 0 after 5294554 usecs [ 17.859761] async_continuing @ 796 after 5294546 usec [ 17.859766] initcall 5_async_port_probe+0x0/0xb3 returned 0 after 5294567 usecs [ 17.859772] async_continuing @ 800 after 5294547 usec [ 17.859776] initcall 6_async_port_probe+0x0/0xb3 returned 0 after 5294556 usecs [ 17.859778] async_continuing @ 801 after 4843388 usec [ 17.859781] initcall 7_async_port_probe+0x0/0xb3 returned 0 after 5294545 usecs [ 17.859784] async_continuing @ 1 after 1191817 usec [ 17.859785] async_waiting @ 1 [ 17.951020] usb 3-2: new low speed USB device using uhci_hcd and address 3 [ 17.980324] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 17.988187] sd 0:0:0:0: [sda] Write Protect is off [ 17.993189] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.998448] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 18.007939] sda: sda1 sda2 sda3 [ 18.026123] sd 0:0:0:0: [sda] Attached SCSI disk [ 18.030938] initcall 8_sd_probe_async+0x0/0x1df returned 0 after 49480 usecs [ 18.038253] async_continuing @ 1 after 174335 usec [ 18.043403] Freeing unused kernel memory: 520k freed [ 18.048715] Write protecting the kernel read-only data: 8228k [ 18.071264] dracut: dracut-002-13.4.git8f397a9b.fc12 dracut: dracut-002-13.4.git8f397a9b.fc12 [ 18.085472] udev: starting version 145 [ 18.093768] usb 3-2: skipped 1 descriptor after interface [ 18.106457] usb 3-2: default language 0x0409 [ 18.122739] usb 3-2: udev 3, busnum 3, minor = 258 [ 18.127736] usb 3-2: New USB device found, idVendor=413c, idProduct=3016 [ 18.134627] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 18.142009] usb 3-2: Product: Dell Premium USB Optical Mouse [ 18.147916] usb 3-2: uevent [ 18.151310] usb 3-2: usb_probe_device [ 18.155193] usb 3-2: configuration #1 chosen from 1 choice [ 18.163716] usb 3-2: adding 3-2:1.0 (config #1, interface 0) [ 18.169592] usb 3-2:1.0: uevent [ 18.173107] usbhid 3-2:1.0: usb_probe_interface [ 18.177837] usbhid 3-2:1.0: usb_probe_interface - got id [ 18.201231] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input4 [ 18.213012] generic-usb 0003:413C:3016.0002: input,hidraw1: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:1a.0-2/input0 [ 18.226120] /root/xen/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003' [ 18.235939] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 18.245306] dracut: Starting plymouth daemon dracut: Starting plymouth daemon [ 18.273282] usb usb3: uevent [ 18.276480] usb 3-0:1.0: uevent [ 18.280006] usb 3-1: uevent [ 18.283186] usb 3-1:1.0: uevent [ 18.287358] usb 3-2: uevent [ 18.290589] usb 3-2:1.0: uevent [ 18.295404] usb usb4: uevent [ 18.298712] usb 4-0:1.0: uevent [ 18.302634] usb usb5: uevent [ 18.305966] usb 5-0:1.0: uevent [ 18.309922] usb usb1: uevent [ 18.313262] usb 1-0:1.0: uevent [ 18.318171] usb usb6: uevent [ 18.325561] usb 6-0:1.0: uevent [ 18.329393] usb usb7: uevent [ 18.332708] usb 7-0:1.0: uevent [ 18.336699] usb usb8: uevent [ 18.340007] usb 8-0:1.0: uevent [ 18.343878] usb usb2: uevent [ 18.347298] usb 2-0:1.0: uevent [ 18.567821] kjournald starting. Commit interval 5 seconds [ 18.567832] EXT3-fs: mounted filesystem with writeback data mode. [ 18.610266] dracut: Mounted root filesystem /dev/sda3 dracut: Mounted root filesystem /dev/sda3 [ 18.768933] dracut: Switching root dracut: Switching root [ 19.122644] hub 1-0:1.0: hub_suspend [ 19.126464] usb usb1: bus auto-suspend [ 19.130407] ehci_hcd 0000:00:1a.7: suspend root hub Welcome to Fedora Press 'I' to enter interactive startup. Starting udev: [ OK ] Setting hostname truckee: [ OK ] Mar 17 09:45:50 | DM multipath kernel driver not loaded Setting up Logical Volume Management: [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda3 /dev/sda3: clean, 249600/19005440 files, 43849114/75993808 blocks [/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 /dev/sda1: clean, 45/51200 files, 53143/204800 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: mount: mount point /proc/xen does not exist [FAILED] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] Entering non-interactive startup Applying Intel CPU microcode update: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. FATAL: Module microcode not found. ERROR: Module microcode does not exist in /proc/modules Enabling ondemand cpu frequency scaling: [ OK ] Starting auditd: [ OK ] Starting portreserve: [ OK ] Starting system logger: [ OK ] Starting irqbalance: [ OK ] Starting rpcbind: [ OK ] Starting system message bus: [ OK ] Starting Avahi daemon... [ OK ] Starting cups: [ OK ] Starting acpi daemon: [ OK ] Starting HAL daemon: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Retrigger failed udev events[ OK ] Setting network parameters... [ OK ] Starting NetworkManager daemon: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. FATAL: Module sunrpc not found. FATAL: Error running install command for sunrpc Error: RPC MTAB does not exist. Enabling Bluetooth devices: Starting sshd: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting abrt daemon: [ OK ] Starting console mouse services: [ OK ] [ OK ] crond: [ OK ] [ OK ] atd: [ OK ] Fedora release 12 (Constantine) Kernel 2.6.31.12 on an x86_64 (/dev/ttyS0) truckee login: root Password: Last login: Wed Mar 17 09:41:52 on ttyS0 [root@truckee ~]# [root@truckee ~]# [root@truckee ~]#