Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: Unable to loc

Attached is the capture log after changing the grub.conf to

ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug swiotlb=force apic=debug loglevel=10

for the dom 0 kernel command line.

On Thu, Mar 18, 2010 at 2:27 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:

On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar wrote:
> pvdisplay does not work in my RHEL machine.
>
> I did pvscan.
> below is the output.
>
> PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free]
>
> Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no VG: 0 [0 ]
>

Ok so /dev/sda2 is the correct device holding the VolGroup01.

Looking at your latest capture.doc I see this:

Command line: ro root=/dev/vg00/lv01 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug swiotlb=force apic=debug loglevel=10

So your root= parameter is wrong! Edit grub.conf and replace it with the actual root device:
root=/dev/VolGroup01/LogVol00

-- Pasi

> On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen <[1]pasik@xxxxxx> wrote:
>
> On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore kumar wrote:
> > I did the below steps for pvops dom 0 kernel.
> >
> > make menuconfig
> > make bzImage
> > make modules
> > make modules_install
> > cp -a .config /boot/config-2.6.32.10
> > cp -a System.map /boot/System.map-2.6.32.10
> > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10
> > /sbin/mkinitrd -f --builtin=ahci /boot/initrd-2.6.32.10.img
> 2.6.32.10
> > I tried root=/dev/VolGroup01/LogVol00 .
> >
>
> Ok.
>
> Please run "pvdisplay" to see which actual partition is the LVM PV for
> your
> volume group.
>
> Also if you're running Fedora 12 you could try generating an initrd
> image
> with dracut instead of mkinitrd.
>
> -- Pasi
>
> >
> > On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen
> <[1][2]pasik@xxxxxx> wrote:
> >
> > On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore kumar wrote:
> > > Here is the output of df -h and cat /etc/fstab of my
> machine.
> > >
> >
> > Did you try both root=/dev/mapper/VolGroup01-LogVol00 and
> > root=/dev/VolGroup01/LogVol00 arguments for the dom0 kernel?
> >
> > How did you generate the initrd image for the dom0 kernel?
> >
> > Anyway this sounds like a grub.conf or initrd problem, not Xen or
> pvops
> > dom0 kernel kernel problem.
> >
> > -- Pasi
> >
> > > Please let me know your thoughts.
> > >
> > > [root@localhost kishore]# df -h
> > >
> > > Filesystem Size Used Avail Use% Mounted on
> > >
> > > /dev/mapper/VolGroup01-LogVol00
> > >
> > > 223G 29G 182G 14% /
> > >
> > > /dev/sda1 99M 81M 13M 87% /boot
> > >
> > > tmpfs 757M 0 757M 0% /dev/shm
> > >
> > > [root@localhost kishore]# cat /etc/fstab
> > >
> > > /dev/VolGroup01/LogVol00 / ext3 defaults 1 1
> > >
> > > LABEL=/boot /boot ext3 defaults 1 2
> > >
> > > tmpfs /dev/shm tmpfs defaults 0 0
> > >
> > > devpts /dev/pts devpts gid=5,mode=620 0 0
> > >
> > > sysfs /sys sysfs defaults 0 0
> > >
> > > proc /proc proc defaults 0 0
> > >
> > > /dev/VolGroup01/LogVol01 swap swap defaults 0 0
> > >
> > > [root@localhost kishore]#
> > >
> > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen
> > <[1][2][3]pasik@xxxxxx> wrote:
> > >
> > > On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore kumar
> wrote:
> > > > I am not sure. Can you please let me know how to
> check
> > this? any
> > > command
> > > > ??
> > >
> > > well simple "df -h" will show it. and also "cat
> /etc/fstab".
> > > You can also check it from your grub configuration.. from
> the
> > working
> > > baremetal (non-Xen) entry.
> > >
> > > -- Pasi
> > > >
> > > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi Kärkkäinen
> > > <[1][2][3][4]pasik@xxxxxx> wrote:
> > > >
> > > > On Tue, Mar 16, 2010 at 03:22:50PM -0700, kishore
> kumar
> > wrote:
> > > > > attached is the log captured in with the word
> > document .
> > > > >
> > > >
> > > > Scanning logical volumes
> > > > Reading all physical volumes. This may take a
> while...
> > > > Activating logical volumes
> > > > Volume group "VolGroup01" not found
> > > > Trying to resume from /dev/VolGroup01/LogVol01
> > > > Unable to access resume device
> (/dev/VolGroup01/LogVol01)
> > > > Creating root device.
> > > > Mounting root filesystem.
> > > > mount: could not find filesystem '/dev/root'
> > > > Setting up other filesystems.
> > > > Setting up new root fs
> > > > setuproot: moving /dev failed: No such file or
> directory
> > > > no fstab.sys, mounting internal defaults
> > > > setuproot: error mounting /proc: No such file or
> directory
> > > > setuproot: error mounting /sys: No such file or
> directory
> > > > Switching to new root and running init.
> > > > unmounting old /dev
> > > > unmounting old /proc
> > > > unmounting old /sys
> > > > switchroot: mount failed: No such file or directory
> > > > init used greatest stack depth: 4088 bytes left
> > > > Kernel panic - not syncing: Attempted to kill init!
> > > >
> > > > So it seems it gets all the way to executing the
> initrd
> > image,
> > > > which then fails to mount the root fs.
> > > >
> > > > Earlier in the log:
> > > > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl
> 300)
> > > > ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA,
> max
> > UDMA/133
> > > > ata1.00: 488397168 sectors, multi 0: LBA48 NCQ
> (depth
> > 31/32), AA
> > > > ata1.00: configured for UDMA/133
> > > > scsi 0:0:0:0: Direct-Access ATA Hitachi
> HDT72102
> > STBO
> > > PQ: 0
> > > > ANSI: 5
> > > > sd 0:0:0:0: Attached scsi generic sg0 type 0
> > > > sd 0:0:0:0: [sda] 488397168 512-byte logical
> blocks: (250
> > GB/232
> > > GiB)
> > > > sd 0:0:0:0: [sda] Write Protect is off
> > > > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > > > sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> > enabled,
> > > doesn't
> > > > support DPO or FUA
> > > > sda: sda1 sda2
> > > > sd 0:0:0:0: [sda] Attached SCSI disk
> > > >
> > > > so /dev/sda was detected. Is your root lvm volume
> on
> > /dev/sda ?
> > > > Is /dev/VolGroup01/LogVol01 really your root fs?
> > > >
> > > > -- Pasi
> > > >
> > > > >
> > > > >
> > > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi
> Kärkkäinen
> > > > <[1][2][3][4][5]pasik@xxxxxx> wrote:
> > > > >
> > > > > On Tue, Mar 16, 2010 at 02:56:06PM -0700,
> kishore
> > kumar
> > > wrote:
> > > > > > Please find the attached log file after
> fixing
> > the
> > > dom 0
> > > > kernel cmd
> > > > > line
> > > > > > as below
> > > > > >
> > > > > > ro root=/dev/VolGroup01/LogVol00
> console=hvc0
> > > > earlyprintk=xen
> > > > > nomodeset
> > > > > >
> > > > >
> > > > > There's something wrong with the log, the
> dom0
> > kernel
> > > parts are
> > > > all on
> > > > > one line..
> > > > > It's really difficult to read it.
> > > > >
> > > > > -- Pasi
> > > > >
> > > > > > Thanks
> > > > > >
> > > > > >
> > > > > > On Tue, Mar 16, 2010 at 2:29 PM, Pasi
> > Kärkkäinen
> > > > > <[1][2][3][4][5][6]pasik@xxxxxx> wrote:
> > > > > >
> > > > > > On Tue, Mar 16, 2010 at 02:16:22PM
> -0700,
> > kishore
> > > kumar
> > > > wrote:
> > > > > > > I did below steps.
> > > > > > >
> > > > > > >
> > > > > > > I pulled DOM 0 kernel from
> > > > > > > git clone
> > > > > >
> > > > >
> > > >
> > >
> >
> git://[1][2][3][4][5][6][7]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > linux-2.6-xen
> > > > > > >
> > > > > > > cd linux-2.6-xen
> > > > > > >
> > > > > > > make clean
> > > > > > >
> > > > > > > cp -a .config .config-old
> > > > > > >
> > > > > > > wget -O .config
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> [2][3][4][5][6][7][8]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > > > > > >
> > > > > > > make oldconfig
> > > > > > >
> > > > > > > make bzImage
> > > > > > >
> > > > > > > make modules
> > > > > > >
> > > > > > > make modules_install
> > > > > > >
> > > > > > > cp -a .config
> /boot/config-2.6.32.9
> > > > > > >
> > > > > > > cp -a System.map
> > /boot/System.map-2.6.32.9
> > > > > > >
> > > > > > > cp -a arch/x86/boot/bzImage
> > > /boot/vmlinuz-2.6.32.9
> > > > > > >
> > > > > > > and modified the grub.conf as
> below
> > > > > > >
> > > > > > >
> > > > > > > Root(hd0,0)
> > > > > > >
> > > > > > > kernel /xen.gz console=vga,com1
> > > com1=115200,8n1
> > > > msi=1
> > > > > iommu=1
> > > > > > >
> > > > > > > module /vmlinuz-2.6.32.9 ro
> > > > root=/dev/VolGroup01/LogVo100
> > > > > rhgb
> > > > > > quiet
> > > > > > >
> > > > > > > module /initrd-2.6.32.9.img
> > > > > > >
> > > > > > >
> > > > > > > and rebooted the machine. Then
> It
> > booted with
> > > some
> > > > xen
> > > > > messages
> > > > > > and
> > > > > > > stopped. Those were the
> messages
> > captured
> > > from
> > > > serial
> > > > > console.
> > > > > > >
> > > > > > > Please let me know if I did
> something
> > wrong
> > > here.
> > > > > > >
> > > > > >
> > > > > > Please fix the kernel cmdline based
> on my
> > earlier
> > > email,
> > > > and
> > > > > capture and
> > > > > > post the
> > > > > > serial console log again!
> > > > > >
> > > > > > -- Pasi
> > > > > > >
> > > > > > >
> > > > > > > On Tue, Mar 16, 2010 at 1:20 PM,
> Pasi
> > > Kärkkäinen
> > > > > > <[3][4][5][6][7][8][9]pasik@xxxxxx>
> wrote:
> > > > > > >
> > > > > > > On Tue, Mar 16, 2010 at
> 01:16:28PM
> > -0700,
> > > Jeremy
> > > > > Fitzhardinge
> > > > > > wrote:
> > > > > > > > On 03/16/2010 12:48 PM, Pasi
> > Kärkkäinen
> > > wrote:
> > > > > > > >> On Tue, Mar 16, 2010 at
> 09:43:44PM
> > +0200,
> > > Pasi
> > > > > Kärkkäinen
> > > > > > wrote:
> > > > > > > >>
> > > > > > > >>> On Tue, Mar 16, 2010 at
> > 10:32:17AM
> > > -0700,
> > > > kishore
> > > > > kumar
> > > > > > wrote:
> > > > > > > >>>
> > > > > > > >>>> Attached is the
> output
> > captured
> > > from
> > > > serial
> > > > > console.
> > > > > > > >>>>
> > > > > > > >>>> Machine does not boot
> after
> > > compiling xen
> > > > 3.4.3
> > > > > with
> > > > > > pv_ops dom
> > > > > > > 0 kernel.
> > > > > > > >>>>
> > > > > > > >>>> Please let me know
> what is
> > going
> > > wrong
> > > > here.
> > > > > > > >>>>
> > > > > > > >>>>
> > > > > > > >>> Ok this looks like a bug
> that is
> > already
> > > being
> > > > sorted
> > > > > out on
> > > > > > > xen-devel mailinglist.
> > > > > > > >>> I added CC to xen-devel.
> > > > > > > >>>
> > > > > > > >>>
> > > > > > > >>
> > > > > > > >
> > > > > > > > Those messages are not a
> problem in
> > > themselves,
> > > > but the
> > > > > related
> > > > > > > problem
> > > > > > > > is believed to be fixed in
> current
> > > > xen/stable-2.6.32.x.
> > > > > It
> > > > > > looks like
> > > > > > > > the output stops there
> because the
> > Xen
> > > console
> > > > isn't set
> > > > > up
> > > > > > properly
> > > > > > > for
> > > > > > > > some reason.
> > > > > > > >
> > > > > > >
> > > > > > > Yeah, remove "rhgb quiet" from
> the
> > options..
> > > the
> > > > dom0
> > > > > kernel
> > > > > > cmdline
> > > > > > > should be like this:
> > > > > > > ro
> root=/dev/VolGroup01/LogVol00
> > > console=hvc0
> > > > > earlyprintk=xen
> > > > > > nomodeset
> > > > > > > -- Pasi
> > > > > > >
> > > > > > > References
> > > > > > >
> > > > > > > Visible links
> > > > > > > 1.
> > > > >
> > > >
> > >
> >
> [5][6][7][8][9][10]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > 2.
> > > > > >
> > > > >
> > > >
> > >
> >
> [6][7][8][9][10][11]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > > > > > > 3.
> mailto:[7][8][9][10][11][12]pasik@xxxxxx
> > > > > >
> > > > > > References
> > > > > >
> > > > > > Visible links
> > > > > > 1.
> mailto:[9][10][11][12][13]pasik@xxxxxx
> > > > > > 2.
> > > > >
> > > >
> > >
> >
> [10][11][12][13][14]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 3.
> > > > >
> > > >
> > >
> >
> [11][12][13][14][15]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > > > > > 4.
> mailto:[12][13][14][15][16]pasik@xxxxxx
> > > > > > 5.
> > > > >
> > > >
> > >
> >
> [13][14][15][16][17]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 6.
> > > > >
> > > >
> > >
> >
> [14][15][16][17][18]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > > > > > 7.
> mailto:[15][16][17][18][19]pasik@xxxxxx
> > > > > > Asserting Post complete GPIO!!!
> > > > > > Transfer control to CSM 16-bit binary for
> legacy
> > boot
> > > > > > __ __ _____ _ _ _____
> > _ _
> > > > > > \ \/ /___ _ __ |___ /| || | |___ /
> _ __
> > ___| || |
> > > _
> > > > __ _
> > > > > __ ___
> > > > > > \ // _ \ '_ \ |_ \| || |_ |_ \ __|
> '__/
> > __| ||
> > > |_ __|
> > > > '_ \|
> > > > > '__/ _ \
> > > > > > / \ __/ | | | ___) |__ _| ___) |__|
> | |
> > (__|__
> > > _|__|
> > > > |_) | |
> > > > > | __/
> > > > > > /_/\_\___|_| |_| |____(_) |_|(_)____/
> |_|
> > \___| |_|
> > > |
> > > > .__/|_|
> > > > > \___|
> > > > > >
> > > |_|
> > > > > > (XEN) Xen version 3.4.3-rc4-pre
> > (kishore@localdomain)
> > > (gcc
> > > > version
> > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar
> 15
> > 13:44:31 PDT
> > > 2010
> > > > > > (XEN) Latest ChangeSet: Tue Mar 09
> 18:15:52 2010
> > +0000
> > > > > 19924:6e72f8c3c017
> > > > > > (XEN) Command line: console=vga,com1
> > com1=115200,8n1
> > > msi=1
> > > > iommu=1
> > > > > > (XEN) Video information:
> > > > > > (XEN) VGA is text mode 80x25, font 8x16
> > > > > > (XEN) VBE/DDC methods: none; EDID
> transfer time:
> > 0
> > > seconds
> > > > > > (XEN) EDID info not retrieved because no
> DDC
> > retrieval
> > > method
> > > > > detected
> > > > > > (XEN) Disc information:
> > > > > > (XEN) Found 1 MBR signatures
> > > > > > (XEN) Found 1 EDD information structures
> > > > > > (XEN) Xen-e820 RAM map:
> > > > > > (XEN) 0000000000000000 - 000000000009d000
> > (usable)
> > > > > > (XEN) 000000000009d000 - 00000000000a0000
> > (reserved)
> > > > > > (XEN) 00000000000e0000 - 0000000000100000
> > (reserved)
> > > > > > (XEN) 0000000000100000 - 000000006d597000
> > (usable)
> > > > > > (XEN) 000000006d597000 - 000000006d686000
> > (reserved)
> > > > > > (XEN) 000000006d686000 - 000000006f598000
> > (usable)
> > > > > > (XEN) 000000006f598000 - 000000006f59a000
> > (reserved)
> > > > > > (XEN) 000000006f59a000 - 000000006f5af000
> (ACPI
> > NVS)
> > > > > > (XEN) 000000006f5af000 - 000000006f5d9000
> > (reserved)
> > > > > > (XEN) 000000006f5d9000 - 000000006f5f9000
> (ACPI
> > data)
> > > > > > (XEN) 000000006f5f9000 - 000000006f6df000
> (ACPI
> > NVS)
> > > > > > (XEN) 000000006f6df000 - 000000006f700000
> (ACPI
> > data)
> > > > > > (XEN) 000000006f700000 - 0000000080000000
> > (reserved)
> > > > > > (XEN) 00000000a0000000 - 00000000b0000000
> > (reserved)
> > > > > > (XEN) 00000000fc000000 - 00000000fd000000
> > (reserved)
> > > > > > (XEN) 00000000fed1c000 - 00000000fed20000
> > (reserved)
> > > > > > (XEN) 00000000ffc00000 - 0000000100000000
> > (reserved)
> > > > > > (XEN) System RAM: 1780MB (1823000kB)
> > > > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL
> )
> > > > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL
> THRLY
> > > 0
> > > > > 1000013)
> > > > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL
> THRLY
> > > 0
> > > > MSFT
> > > > > 100000D)
> > > > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL
> THRLY
> > > 3
> > > > MSFT
> > > > > 100000D)
> > > > > > (XEN) ACPI: FACS 6F5F9000, 0040
> > > > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL
> THRLY
> > > 0
> > > > MSFT
> > > > > 100000D)
> > > > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL
> THRLY
> > > 1
> > > > MSFT
> > > > > 100000D)
> > > > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL
> THRLY
> > > 1
> > > > MSFT
> > > > > 100000D)
> > > > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL
> THRLY
> > > 1
> > > > MSFT
> > > > > 100000D)
> > > > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL
> THRLY
> > > 0
> > > > MSFT
> > > > > 100000D)
> > > > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1
> INTEL SSDT
> > PM
> > > 4000
> > > > INTL
> > > > > 20061109)
> > > > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL
> THRLY
> > > 1
> > > > MSFT
> > > > > 100000D)
> > > > > > (XEN) Domain heap initialised
> > > > > > (XEN) Processor #0 6:12 APIC version 21
> > > > > > (XEN) Processor #2 6:12 APIC version 21
> > > > > > (XEN) Processor #4 6:12 APIC version 21
> > > > > > (XEN) Processor #16 6:12 APIC version 21
> > > > > > (XEN) Processor #18 6:12 APIC version 21
> > > > > > (XEN) Processor #20 6:12 APIC version 21
> > > > > > (XEN) Processor #1 6:12 APIC version 21
> > > > > > (XEN) Processor #3 6:12 APIC version 21
> > > > > > (XEN) Processor #5 6:12 APIC version 21
> > > > > > (XEN) Processor #17 6:12 APIC version 21
> > > > > > (XEN) Processor #19 6:12 APIC version 21
> > > > > > (XEN) Processor #21 6:12 APIC version 21
> > > > > > (XEN) IOAPIC[0]: apic_id 8, version 32,
> address
> > > 0xfec00000, GSI
> > > > 0-23
> > > > > > (XEN) IOAPIC[1]: apic_id 9, version 32,
> address
> > > 0xfec90000, GSI
> > > > 24-47
> > > > > > (XEN) Enabling APIC mode: Phys. Using 2
> I/O
> > APICs
> > > > > > (XEN) Intel VT-d DMAR tables have been
> parsed.
> > > > > > (XEN) Using scheduler: SMP Credit
> Scheduler
> > (credit)
> > > > > > (XEN) Detected 3200.207 MHz processor.
> > > > > > (XEN) VMX: Supported advanced features:
> > > > > > (XEN) - APIC MMIO access virtualisation
> > > > > > (XEN) - APIC TPR shadow
> > > > > > (XEN) - Extended Page Tables (EPT)
> > > > > > (XEN) - Virtual-Processor Identifiers
> (VPID)
> > > > > > (XEN) - Virtual NMI
> > > > > > (XEN) - MSR direct-access bitmap
> > > > > > (XEN) VMX: EPT is available.
> > > > > > (XEN) VMX: VPID is available.
> > > > > > (XEN) HVM: VMX enabled
> > > > > > (XEN) HVM: Hardware Assisted Paging
> detected.
> > > > > > (XEN) CPU0: Intel Genuine Intel(R) CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 1/2 eip 88000
> > > > > > (XEN) CPU1: Intel Genuine Intel(R) CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 2/4 eip 88000
> > > > > > (XEN) CPU2: Intel Genuine Intel(R) CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 3/16 eip 88000
> > > > > > (XEN) CPU3: Intel Genuine Intel(R) CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 4/18 eip 88000
> > > > > > (XEN) CPU4: Intel Genuine Intel(R) CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 5/20 eip 88000
> > > > > > (XEN) CPU5: Intel Genuine Intel(R) CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 6/1 eip 88000
> > > > > > (XEN) CPU6: Intel Genuine Intel(R) CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 7/3 eip 88000
> > > > > > (XEN) CPU7: Intel Genuine Intel(R) CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 8/5 eip 88000
> > > > > > (XEN) CPU8: Intel Genuine Intel(R) CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 9/17 eip 88000
> > > > > > (XEN) CPU9: Intel Genuine Intel(R) CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 10/19 eip 88000
> > > > > > (XEN) CPU10: Intel Genuine Intel(R) CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 11/21 eip 88000
> > > > > > (XEN) CPU11: Intel Genuine Intel(R) CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Total of 12 processors activated.
> > > > > > (XEN) ENABLING IO-APIC IRQs
> > > > > > (XEN) -> Using new ACK method
> > > > > > (XEN) checking TSC synchronization across
> 12
> > CPUs:
> > > passed.
> > > > > > (XEN) Platform timer is 14.318MHz HPET
> > > > > > ?(XEN) Brought up 12 CPUs
> > > > > > (XEN) Intel VT-d Snoop Control supported.
> > > > > > (XEN) Intel VT-d DMA Passthrough not
> supported.
> > > > > > (XEN) Intel VT-d Queued Invalidation
> supported.
> > > > > > (XEN) Intel VT-d Interrupt Remapping
> supported.
> > > > > > (XEN) I/O virtualisation enabled
> > > > > > (XEN) I/O virtualisation for PV guests
> disabled
> > > > > > (XEN) xenoprof: Initialization failed.
> Intel
> > processor
> > > model 44
> > > > for P6
> > > > > class family is not supported
> > > > > > (XEN) *** LOADING DOMAIN 0 ***
> > > > > > (XEN) Xen kernel: 64-bit, lsb, compat32
> > > > > > (XEN) Dom0 kernel: 64-bit, PAE, lsb,
> paddr
> > 0x1000000 ->
> > > > 0x26bb000
> > > > > > (XEN) PHYSICAL MEMORY ARRANGEMENT:
> > > > > > (XEN) Dom0 alloc.:
> > 0000000064000000->0000000068000000
> > > > (404490 pages
> > > > > to be allocated)
> > > > > > (XEN) VIRTUAL MEMORY ARRANGEMENT:
> > > > > > (XEN) Loaded kernel:
> > ffffffff81000000->ffffffff826bb000
> > > > > > (XEN) Init. ramdisk:
> > ffffffff826bb000->ffffffff82d0d800
> > > > > > (XEN) Phys-Mach map:
> > ffffffff82d0e000->ffffffff83044050
> > > > > > (XEN) Start info:
> > ffffffff83045000->ffffffff830454b4
> > > > > > (XEN) Page tables:
> > ffffffff83046000->ffffffff83063000
> > > > > > (XEN) Boot stack:
> > ffffffff83063000->ffffffff83064000
> > > > > > (XEN) TOTAL:
> > ffffffff80000000->ffffffff83400000
> > > > > > (XEN) ENTRY ADDRESS: ffffffff819c1200
> > > > > > (XEN) Dom0 has maximum 12 VCPUs
> > > > > > (XEN) Scrubbing Free RAM: .done.
> > > > > > (XEN) Xen trace buffers: disabled
> > > > > > (XEN) Std. Loglevel: Errors and warnings
> > > > > > (XEN) Guest Loglevel: Nothing
> (Rate-limited:
> > Errors and
> > > > warnings)
> > > > > > (XEN) Xen is relinquishing VGA console.
> > > > > > (XEN) *** Serial input -> DOM0 (type
> 'CTRL-a'
> > three
> > > times to
> > > > switch
> > > > > input to Xen)
> > > > > > (XEN) Freed 128kB init memory.
> > > > > > mapping kernel into physical memory
> > > > > > Xen: setup ISA identity maps
> > > > > > about to get started...
> > > > > > Initializing cgroup subsys cpuset
> > > > > > Initializing cgroup subsys cpu
> > > > > > Linux version 2.6.32.9
> > (kishore@xxxxxxxxxxxxxxxxxxxxx)
> > > (gcc
> > > > version
> > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP
> Mon Mar
> > 15
> > > 15:16:28 PDT
> > > > 2010
> > > > > > Command line: ro
> root=/dev/VolGroup01/LogVol00
> > > console=hvc0
> > > > > earlyprintk=xen nomodeset
> > > > > > KERNEL supported cpus:
> > > > > > Intel GenuineIntel
> > > > > > AMD AuthenticAMD
> > > > > > Centaur CentaurHauls
> > > > > > BIOS-provided physical RAM map:
> > > > > > Xen: 0000000000000000 - 000000000009d000
> > (usable)
> > > > > > Xen: 000000000009d000 - 0000000000100000
> > (reserved)
> > > > > > Xen: 0000000000100000 - 0000000066c0a000
> > (usable)
> > > > > > Xen: 000000006d597000 - 000000006d686000
> > (reserved)
> > > > > > Xen: 000000006f598000 - 000000006f59a000
> > (reserved)
> > > > > > Xen: 000000006f59a000 - 000000006f5af000
> (ACPI
> > NVS)
> > > > > > Xen: 000000006f5af000 - 000000006f5d9000
> > (reserved)
> > > > > > Xen: 000000006f5d9000 - 000000006f5f9000
> (ACPI
> > data)
> > > > > > Xen: 000000006f5f9000 - 000000006f6df000
> (ACPI
> > NVS)
> > > > > > Xen: 000000006f6df000 - 000000006f700000
> (ACPI
> > data)
> > > > > > Xen: 000000006f700000 - 0000000080000000
> > (reserved)
> > > > > > Xen: 00000000a0000000 - 00000000b0000000
> > (reserved)
> > > > > > Xen: 00000000fc000000 - 00000000fd000000
> > (reserved)
> > > > > > Xen: 00000000fed1c000 - 00000000fed20000
> > (reserved)
> > > > > > Xen: 00000000ffc00000 - 0000000100000000
> > (reserved)
> > > > > > bootconsole [xenboot0] enabled
> > > > > > DMI 2.4 present.
> > > > > > last_pfn = 0x66c0a max_arch_pfn =
> 0x400000000
> > > > > > init_memory_mapping:
> > 0000000000000000-0000000066c0a000
> > > > > > RAMDISK: 026bb000 - 02d0d800
> > > > > > ACPI: RSDP 00000000000f03f0 00024 (v02
> INTEL )
> > > > > > ACPI: XSDT 000000006f6fe120 00064 (v01
> INTEL
> > THRLY
> > > 00000000
> > > > > 01000013)
> > > > > > ACPI: FACP 000000006f6fd000 000F4 (v04
> INTEL
> > THRLY
> > > 00000000
> > > > MSFT
> > > > > 0100000D)
> > > > > > ACPI: DSDT 000000006f6f5000 074F1 (v02
> INTEL
> > THRLY
> > > 00000003
> > > > MSFT
> > > > > 0100000D)
> > > > > > ACPI: FACS 000000006f5f9000 00040
> > > > > > ACPI: APIC 000000006f6f4000 001CC (v02
> INTEL
> > THRLY
> > > 00000000
> > > > MSFT
> > > > > 0100000D)
> > > > > > ACPI: MCFG 000000006f6f3000 0003C (v01
> INTEL
> > THRLY
> > > 00000001
> > > > MSFT
> > > > > 0100000D)
> > > > > > ACPI: HPET 000000006f6f2000 00038 (v01
> INTEL
> > THRLY
> > > 00000001
> > > > MSFT
> > > > > 0100000D)
> > > > > > ACPI: SLIT 000000006f6f1000 00030 (v01
> INTEL
> > THRLY
> > > 00000001
> > > > MSFT
> > > > > 0100000D)
> > > > > > ACPI: WDDT 000000006f6f0000 00040 (v01
> INTEL
> > THRLY
> > > 00000000
> > > > MSFT
> > > > > 0100000D)
> > > > > > ACPI: SSDT 000000006f5d9000 1FDDC (v01
> INTEL
> > SSDT PM
> > > 00004000
> > > > INTL
> > > > > 20061109)
> > > > > > ACPI: 000000006f6ee000 001D0 (v01
> INTEL
> > THRLY
> > > 00000001
> > > > MSFT
> > > > > 0100000D)
> > > > > > No NUMA configuration found
> > > > > > Faking a node at
> > 0000000000000000-0000000066c0a000
> > > > > > Bootmem setup node 0
> > 0000000000000000-0000000066c0a000
> > > > > > NODE_DATA [0000000000008000 -
> 000000000001ffff]
> > > > > > bootmap [0000000000020000 -
> 000000000002cd87]
> > pages d
> > > > > > (9 early reservations) ==> bootmem
> [0000000000 -
> > > 0066c0a000]
> > > > > > #0 [0000000000 - 0000001000] BIOS data
> page
> > ==>
> > > [0000000000
> > > > -
> > > > > 0000001000]
> > > > > > #1 [0003046000 - 0003063000] XEN
> PAGETABLES
> > ==>
> > > [0003046000
> > > > -
> > > > > 0003063000]
> > > > > > #2 [0000006000 - 0000008000]
> TRAMPOLINE
> > ==>
> > > [0000006000
> > > > -
> > > > > 0000008000]
> > > > > > #3 [0001000000 - 000269ae98] TEXT
> DATA BSS
> > ==>
> > > [0001000000
> > > > -
> > > > > 000269ae98]
> > > > > > #4 [00026bb000 - 0002d0d800]
> RAMDISK
> > ==>
> > > [00026bb000
> > > > -
> > > > > 0002d0d800]
> > > > > > #5 [0002d0e000 - 0003046000] XEN START
> INFO
> > ==>
> > > [0002d0e000
> > > > -
> > > > > 0003046000]
> > > > > > #6 [000269b000 - 000269b011]
> BRK
> > ==>
> > > [000269b000
> > > > -
> > > > > 000269b011]
> > > > > > #7 [0000100000 - 000041a000]
> PGTABLE
> > ==>
> > > [0000100000
> > > > -
> > > > > 000041a000]
> > > > > > #8 [0000001000 - 0000001030] ACPI
> SLIT
> > ==>
> > > [0000001000
> > > > -
> > > > > 0000001030]
> > > > > > found SMP MP-table at [ffff8800000fd750]
> fd750
> > > > > > Zone PFN ranges:
> > > > > > DMA 0x00000000 -> 0x00001000
> > > > > > DMA32 0x00001000 -> 0x00100000
> > > > > > Normal 0x00100000 -> 0x00100000
> > > > > > Movable zone start PFN for each node
> > > > > > early_node_map[2] active PFN ranges
> > > > > > 0: 0x00000000 -> 0x0000009d
> > > > > > 0: 0x00000100 -> 0x00066c0a
> > > > > > ACPI: PM-Timer IO Port: 0x408
> > > > > > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x00] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x01] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x02] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x03] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x04] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x05] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x06] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x07] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x08] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x09] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x10] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x11] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x12] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x13] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x14] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x15] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x16] high level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x17] high level
> > lint[0x1])
> > > > > > ACPI: IOAPIC (id[0x08] address[0xfec00000]
> > gsi_base[0])
> > > > > > IOAPIC[0]: apic_id 8, version 0, address
> > 0xfec00000, GSI
> > > 0-0
> > > > > > ACPI: IOAPIC (id[0x09] address[0xfec90000]
> > gsi_base[24])
> > > > > > IOAPIC[1]: apic_id 9, version 0, address
> > 0xfec90000, GSI
> > > 24-24
> > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0
> global_irq 2
> > dfl dfl)
> > > > > > ERROR: Unable to locate IOAPIC for GSI 2
> > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9
> global_irq 9
> > high
> > > level)
> > > > > > ERROR: Unable to locate IOAPIC for GSI 9
> > > > > > Using ACPI (MADT) for SMP configuration
> > information
> > > > > > ACPI: HPET id: 0x8086a401 base: 0xfed00000
> > > > > > SMP: Allowing 12 CPUs, 0 hotplug CPUs
> > > > > > PM: Registered nosave memory:
> 000000000009d000 -
> > > > 0000000000100000
> > > > > > Allocating PCI resources starting at
> b0000000
> > (gap:
> > > > b0000000:4c000000)
> > > > > > Booting paravirtualized kernel on Xen
> > > > > > Xen version: 3.4.3-rc4-pre (preserve-AD)
> (dom0)
> > > > > > NR_CPUS:512 nr_cpumask_bits:512
> nr_cpu_ids:12
> > > nr_node_ids:1
> > > > > > PERCPU: Embedded 478 pages/cpu
> @ffff880005ebc000
> > > s1928024 r8192
> > > > d21672
> > > > > u1957888
> > > > > > pcpu-alloc: s1928024 r8192 d21672 u1957888
> > > alloc=478*4096
> > > > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03
> [0] 04
> > [0] 05
> > > [0] 06
> > > > [0] 07
> > > > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11
> > > > > > Xen: using vcpu_info placement
> > > > > > Built 1 zonelists in Node order, mobility
> > grouping on.
> > > Total
> > > > pages:
> > > > > 409291
> > > > > > Policy zone: DMA32
> > > > > > Kernel command line: ro
> > root=/dev/VolGroup01/LogVol00
> > > > console=hvc0
> > > > > earlyprintk=xen nomodeset
> > > > > > PID hash table entries: 4096 (order: 3,
> 32768
> > bytes)
> > > > > > Initializing CPU#0
> > > > > > DMA: Placing 64MB software IO TLB between
> > > ffff880007525000 -
> > > > > ffff88000b525000
> > > > > > DMA: software IO TLB at phys 0x7525000 -
> > 0xb525000
> > > > > > xen_swiotlb_fixup: buf=ffff880007525000
> > size=67108864
> > > > > > xen_swiotlb_fixup: buf=ffff88000b585000
> > size=32768
> > > > > > Memory: 1514268k/1683496k available (4654k
> kernel
> > code,
> > > 396k
> > > > absent,
> > > > > 168832k reserved, 3443k data, 3396k init)
> > > > > > SLUB: Genslabs=14, HWalign=64, Order=0-3,
> > MinObjects=0,
> > > > CPUs=12,
> > > > > Nodes=1
> > > > > > Hierarchical RCU implementation.
> > > > > > NR_IRQS:4352 nr_irqs:3072
> > > > > > Already setup the GSI :0
> > > > > > Already setup the GSI :1
> > > > > > Already setup the GSI :2
> > > > > > Already setup the GSI :3
> > > > > > Already setup the GSI :4
> > > > > > Already setup the GSI :5
> > > > > > Already setup the GSI :6
> > > > > > Already setup the GSI :7
> > > > > > Already setup the GSI :8
> > > > > > Already setup the GSI :9
> > > > > > Already setup the GSI :10
> > > > > > Already setup the GSI :11
> > > > > > Already setup the GSI :12
> > > > > > Already setup the GSI :13
> > > > > > Already setup the GSI :14
> > > > > > Already setup the GSI :15
> > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0
> global_irq 2
> > dfl dfl)
> > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9
> global_irq 9
> > high
> > > level)
> > > > > > xen: sci override: source_irq=9
> global_irq=9
> > trigger=c
> > > > polarity=1
> > > > > > xen_allocate_pirq: returning irq 9 for gsi
> 9
> > > > > > Already setup the GSI :9
> > > > > > xen: acpi sci 9
> > > > > > Console: colour VGA+ 80x25
> > > > > > console [hvc0] enabled, bootconsole
> disabled
> > console
> > > [hvc0]
> > > > enabled,
> > > > > bootconsole disabled
> > > > > > Lock dependency validator: Copyright (c)
> 2006 Red
> > Hat,
> > > Inc.,
> > > > Ingo
> > > > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ...
> > MAX_LOCK_DEPTH:
> > > > 48
> > > > > ... MAX_LOCKDEP_KEYS: 8191 ...
> > CLASSHASH_SIZE:
> > > > 4096 ...
> > > > > MAX_LOCKDEP_ENTRIES: 16384 ...
> > MAX_LOCKDEP_CHAINS:
> > > 32768
> > > > ...
> > > > > CHAINHASH_SIZE: 16384 memory used
> by lock
> > > dependency
> > > > info:
> > > > > 6367 kB per task-struct memory footprint:
> 2688
> > bytes
> > > allocated
> > > > 17039360
> > > > > bytes of page_cgroup please try
> > 'cgroup_disable=memory'
> > > option if
> > > > you
> > > > > don't want memory cgroups installing Xen
> timer for
> > CPU 0
> > > Detected
> > > > > 3200.206 MHz processor. Calibrating delay
> loop
> > (skipped),
> > > value
> > > > > calculated using timer frequency.. 6400.41
> BogoMIPS
> > > (lpj=3200206)
> > > > > Security Framework initialized SELinux:
> > Initializing.
> > > Dentry
> > > > cache hash
> > > > > table entries: 262144 (order: 9, 2097152
> bytes)
> > > Inode-cache hash
> > > > table
> > > > > entries: 131072 (order: 8, 1048576 bytes)
> > Mount-cache hash
> > > table
> > > > > entries: 256 Initializing cgroup subsys ns
> > Initializing
> > > cgroup
> > > > subsys
> > > > > cpuacct Initializing cgroup subsys memory
> > Initializing
> > > cgroup
> > > > subsys
> > > > > devices Initializing cgroup subsys freezer
> > Initializing
> > > cgroup
> > > > subsys
> > > > > net_cls CPU: L1 I cache: 32K, L1 D cache:
> 32K CPU:
> > L2
> > > cache: 256K
> > > > CPU:
> > > > > L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU:
> > Unsupported
> > > number of
> > > > siblings
> > > > > 32 Performance Events: unsupported p6 CPU
> model 44
> > no PMU
> > > driver,
> > > > > software events only. lockdep: fixing up
> > alternatives. SMP
> > > > alternatives:
> > > > > switching to UP code ACPI: Core revision
> 20090903
> > ftrace:
> > > > converting
> > > > > mcount calls to 0f 1f 44 00 00 ftrace:
> allocating
> > 27971
> > > entries
> > > > in 110
> > > > > pages installing Xen timer for CPU 1
> lockdep:
> > fixing up
> > > > alternatives.
> > > > > SMP alternatives: switching to SMP code
> > Initializing CPU#1
> > > CPU:
> > > > L1 I
> > > > > cache: 32K, L1 D cache: 32K CPU: L2 cache:
> 256K
> > CPU: L3
> > > cache:
> > > > 12288K
> > > > > CPU 1/0x0 -> Node 0 CPU: Unsupported number
> of
> > siblings 32
> > > > installing
> > > > > Xen timer for CPU 2 Initializing CPU#2 CPU:
> L1 I
> > cache:
> > > 32K, L1 D
> > > > cache:
> > > > > 32K CPU: L2 cache: 256K CPU: L3 cache:
> 12288K CPU
> > 2/0x0 ->
> > > Node 0
> > > > CPU:
> > > > > Unsupported number of siblings 32 installing
> Xen
> > timer for
> > > CPU 3
> > > > > Initializing CPU#3 CPU: L1 I cache: 32K, L1
> D
> > cache: 32K
> > > CPU: L2
> > > > cache:
> > > > > 256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node
> 0 CPU:
> > > Unsupported
> > > > number
> > > > > of siblings 32 installing Xen timer for CPU
> 4
> > Initializing
> > > CPU#4
> > > > CPU: L1
> > > > > I cache: 32K, L1 D cache: 32K CPU: L2 cache:
> 256K
> > CPU: L3
> > > cache:
> > > > 12288K
> > > > > CPU 4/0x0 -> Node 0 CPU: Unsupported number
> of
> > siblings 32
> > > > installing
> > > > > Xen timer for CPU 5 Initializing CPU#5 CPU:
> L1 I
> > cache:
> > > 32K, L1 D
> > > > cache:
> > > > > 32K CPU: L2 cache: 256K CPU: L3 cache:
> 12288K CPU
> > 5/0x0 ->
> > > Node 0
> > > > CPU:
> > > > > Unsupported number of siblings 32 installing
> Xen
> > timer for
> > > CPU 6
> > > > > Initializing CPU#6 CPU: L1 I cache: 32K, L1
> D
> > cache: 32K
> > > CPU: L2
> > > > cache:
> > > > > 256K CPU: L3 cache: 12288K CPU 6/0x0 -> Node
> 0 CPU:
> > > Unsupported
> > > > number
> > > > > of siblings 32 installing Xen timer for CPU
> 7
> > Initializing
> > > CPU#7
> > > > CPU: L1
> > > > > I cache: 32K, L1 D cache: 32K CPU: L2 cache:
> 256K
> > CPU: L3
> > > cache:
> > > > 12288K
> > > > > CPU 7/0x0 -> Node 0 CPU: Unsupported number
> of
> > siblings 32
> > > > installing
> > > > > Xen timer for CPU 8 Initializing CPU#8 CPU:
> L1 I
> > cache:
> > > 32K, L1 D
> > > > cache:
> > > > > 32K CPU: L2 cache: 256K CPU: L3 cache:
> 12288K CPU
> > 8/0x0 ->
> > > Node 0
> > > > CPU:
> > > > > Unsupported number of siblings 32 installing
> Xen
> > timer for
> > > CPU 9
> > > > > Initializing CPU#9 CPU: L1 I cache: 32K, L1
> D
> > cache: 32K
> > > CPU: L2
> > > > cache:
> > > > > 256K CPU: L3 cache: 12288K CPU 9/0x0 -> Node
> 0 CPU:
> > > Unsupported
> > > > number
> > > > > of siblings 32 installing Xen timer for CPU
> 10
> > > Initializing
> > > > CPU#10 CPU:
> > > > > L1 I cache: 32K, L1 D cache: 32K CPU: L2
> cache:
> > 256K CPU:
> > > L3
> > > > cache:
> > > > > 12288K CPU 10/0x0 -> Node 0 CPU: Unsupported
> number
> > of
> > > siblings
> > > > 32
> > > > > installing Xen timer for CPU 11 Initializing
> CPU#11
> > CPU:
> > > L1 I
> > > > cache:
> > > > > 32K, L1 D cache: 32K CPU: L2 cache: 256K
> CPU: L3
> > cache:
> > > 12288K
> > > > CPU
> > > > > 11/0x0 -> Node 0 CPU: Unsupported number of
> > siblings 32
> > > Brought
> > > > up 12
> > > > > CPUs Grant table initialized regulator: core
> > version 0.5
> > > Time:
> > > > 14:45:00
> > > > > Date: 03/16/10 NET: Registered protocol
> family 16
> > > > xenbus_probe_init ok
> > > > > ACPI FADT declares the system doesn't
> support PCIe
> > ASPM,
> > > so
> > > > disable it
> > > > > ACPI: bus type pci registered PCI: MCFG
> > configuration 0:
> > > base
> > > > a0000000
> > > > > segment 0 buses 0 - 255 PCI: MCFG area at
> a0000000
> > > reserved in
> > > > E820 PCI:
> > > > > Using MMCONFIG at a0000000 - afffffff PCI:
> Using
> > > configuration
> > > > type 1
> > > > > for base access bio: create slab <bio-0> at
> 0 ACPI
> > Error:
> > > Field
> > > > [CPB3]
> > > > > at 96 exceeds Buffer [NULL] size 64 (bits)
> > > > (20090903/dsopcode-596) ACPI
> > > > > Error (psparse-0537): Method parse/execution
> failed
> > > [\_SB_._OSC]
> > > > (Node
> > > > > ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI:
> > Interpreter
> > > enabled
> > > > ACPI:
> > > > > (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC
> for
> > interrupt
> > > > routing ACPI
> > > > > Warning: Incorrect checksum in table [ ]
> - 97,
> > should
> > > be DB
> > > > > (20090903/tbutils-314) ACPI: No dock devices
> found.
> > ACPI:
> > > PCI
> > > > Root
> > > > > Bridge [PCI0] (0000:00) pci 0000:00:01.0:
> PME#
> > supported
> > > from D0
> > > > D3hot
> > > > > D3cold pci 0000:00:01.0: PME# disabled pci
> > 0000:00:02.0:
> > > PME#
> > > > supported
> > > > > from D0 D3hot D3cold pci 0000:00:02.0: PME#
> > disabled pci
> > > > 0000:00:03.0:
> > > > > PME# supported from D0 D3hot D3cold pci
> > 0000:00:03.0: PME#
> > > > disabled pci
> > > > > 0000:00:04.0: PME# supported from D0 D3hot
> D3cold
> > pci
> > > > 0000:00:04.0: PME#
> > > > > disabled pci 0000:00:05.0: PME# supported
> from D0
> > D3hot
> > > D3cold
> > > > pci
> > > > > 0000:00:05.0: PME# disabled pci
> 0000:00:06.0: PME#
> > > supported from
> > > > D0
> > > > > D3hot D3cold pci 0000:00:06.0: PME# disabled
> pci
> > > 0000:00:07.0:
> > > > PME#
> > > > > supported from D0 D3hot D3cold pci
> 0000:00:07.0:
> > PME#
> > > disabled
> > > > pci
> > > > > 0000:00:08.0: PME# supported from D0 D3hot
> D3cold
> > pci
> > > > 0000:00:08.0: PME#
> > > > > disabled pci 0000:00:09.0: PME# supported
> from D0
> > D3hot
> > > D3cold
> > > > pci
> > > > > 0000:00:09.0: PME# disabled pci
> 0000:00:0a.0: PME#
> > > supported from
> > > > D0
> > > > > D3hot D3cold pci 0000:00:0a.0: PME# disabled
> pci
> > > 0000:00:13.0:
> > > > PME#
> > > > > supported from D0 D3hot D3cold pci
> 0000:00:13.0:
> > PME#
> > > disabled
> > > > pci
> > > > > 0000:00:1a.7: PME# supported from D0 D3hot
> D3cold
> > pci
> > > > 0000:00:1a.7: PME#
> > > > > disabled pci 0000:00:1c.0: PME# supported
> from D0
> > D3hot
> > > D3cold
> > > > pci
> > > > > 0000:00:1c.0: PME# disabled pci
> 0000:00:1c.4: PME#
> > > supported from
> > > > D0
> > > > > D3hot D3cold pci 0000:00:1c.4: PME# disabled
> pci
> > > 0000:00:1c.5:
> > > > PME#
> > > > > supported from D0 D3hot D3cold pci
> 0000:00:1c.5:
> > PME#
> > > disabled
> > > > pci
> > > > > 0000:00:1d.7: PME# supported from D0 D3hot
> D3cold
> > pci
> > > > 0000:00:1d.7: PME#
> > > > > disabled pci 0000:00:1f.0: quirk: region
> 0400-047f
> > claimed
> > > by
> > > > ICH6
> > > > > ACPI/GPIO/TCO pci 0000:00:1f.0: quirk:
> region
> > 0500-053f
> > > claimed
> > > > by ICH6
> > > > > GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO
> decode 1
> > PIO at
> > > 0680
> > > > (mask
> > > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO
> decode
> > 2 PIO
> > > at 0ca0
> > > > (mask
> > > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO
> decode
> > 3 PIO
> > > at 0600
> > > > (mask
> > > > > 001f) pci 0000:00:1f.2: PME# supported from
> D3hot
> > pci
> > > > 0000:00:1f.2: PME#
> > > > > disabled pci 0000:01:00.0: PME# supported
> from D0
> > D3hot
> > > D3cold
> > > > pci
> > > > > 0000:01:00.0: PME# disabled pci
> 0000:01:00.1: PME#
> > > supported from
> > > > D0
> > > > > D3hot D3cold pci 0000:01:00.1: PME# disabled
> pci
> > > 0000:0c:00.0:
> > > > disabling
> > > > > ASPM on pre-1.1 PCIe device. You can enable
> it
> > with
> > > > 'pcie_aspm=force'
> > > > > pci 0000:00:1e.0: transparent bridge ACPI:
> PCI Root
> > Bridge
> > > [PCI1]
> > > > > (0000:fe) ACPI: PCI Root Bridge [PCI2]
> (0000:ff)
> > ACPI: PCI
> > > > Interrupt
> > > > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14
> 15)
> > ACPI: PCI
> > > > Interrupt Link
> > > > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
> ACPI: PCI
> > > Interrupt
> > > > Link
> > > > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
> ACPI: PCI
> > > Interrupt
> > > > Link
> > > > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
> ACPI: PCI
> > > Interrupt
> > > > Link
> > > > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
> > disabled.
> > > ACPI: PCI
> > > > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10
> *11 12
> > 14 15)
> > > ACPI:
> > > > PCI
> > > > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10
> 11 12 14
> > 15)
> > > *0,
> > > > disabled.
> > > > > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5
> 6 7 9
> > *10 11
> > > 12 14
> > > > 15)
> > > > > xenbus_probe_backend_init bus registered ok
> > > > xenbus_probe_frontend_init
> > > > > bus registered ok xen_balloon: Initialising
> balloon
> > driver
> > > with
> > > > page
> > > > > order 0. vgaarb: device added:
> > > > >
> > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none
> > > vgaarb:
> > > > loaded
> > > > > SCSI subsystem initialized usbcore:
> registered new
> > > interface
> > > > driver
> > > > > usbfs usbcore: registered new interface
> driver hub
> > > usbcore:
> > > > registered
> > > > > new device driver usb PCI: Using ACPI for
> IRQ
> > routing
> > > NetLabel:
> > > > > Initializing NetLabel: domain hash size =
> 128
> > NetLabel:
> > > > protocols =
> > > > > UNLABELED CIPSOv4 NetLabel: unlabeled
> traffic
> > allowed by
> > > default
> > > > > Switching to clocksource xen kstop/0 used
> greatest
> > stack
> > > depth:
> > > > 6568
> > > > > bytes left kstop/1 used greatest stack
> depth: 6536
> > bytes
> > > left
> > > > pnp: PnP
> > > > > ACPI init ACPI: bus type pnp registered
> > xen_allocate_pirq:
> > > > returning irq
> > > > > 8 for gsi 8 Already setup the GSI :8
> > xen_allocate_pirq:
> > > returning
> > > > irq 13
> > > > > for gsi 13 Already setup the GSI :13 pnp:
> PnP ACPI:
> > found
> > > 13
> > > > devices
> > > > > ACPI: ACPI bus type pnp unregistered system
> 00:07:
> > ioport
> > > range
> > > > > 0x500-0x53f has been reserved system 00:07:
> ioport
> > range
> > > > 0x400-0x47f has
> > > > > been reserved system 00:07: ioport range
> > 0x800-0x81f has
> > > been
> > > > reserved
> > > > > system 00:07: ioport range 0x2f8-0x2ff has
> been
> > reserved
> > > system
> > > > 00:07:
> > > > > iomem range 0xfed1c000-0xfed8bffe could not
> be
> > reserved
> > > system
> > > > 00:07:
> > > > > iomem range 0xff000000-0xffffffff could not
> be
> > reserved
> > > system
> > > > 00:07:
> > > > > iomem range 0xfee00000-0xfeefffff has been
> reserved
> > system
> > > 00:07:
> > > > iomem
> > > > > range 0xfe900000-0xfe90001f has been
> reserved
> > system
> > > 00:07: iomem
> > > > range
> > > > > 0xfea00000-0xfea0001f has been reserved
> system
> > 00:07:
> > > iomem range
> > > > > 0xfed1b000-0xfed1bfff has been reserved pci
> > 0000:0c:00.0:
> > > BAR 6:
> > > > no
> > > > > parent found for of device
> [0xffff0000-0xffffffff]
> > pci
> > > > 0000:00:01.0: PCI
> > > > > bridge, secondary bus 0000:01 pci
> 0000:00:01.0:
> > IO
> > > window:
> > > > > 0x1000-0x1fff pci 0000:00:01.0: MEM
> window:
> > > > 0xb1900000-0xb19fffff pci
> > > > > 0000:00:01.0: PREFETCH window: disabled
> pci
> > > 0000:00:02.0: PCI
> > > > bridge,
> > > > > secondary bus 0000:02 pci 0000:00:02.0: IO
> > window:
> > > disabled pci
> > > > > 0000:00:02.0: MEM window: disabled pci
> > 0000:00:02.0:
> > > PREFETCH
> > > > > window: disabled pci 0000:00:03.0: PCI
> bridge,
> > secondary
> > > bus
> > > > 0000:03 pci
> > > > > 0000:00:03.0: IO window: disabled pci
> > 0000:00:03.0:
> > > MEM
> > > > window:
> > > > > disabled pci 0000:00:03.0: PREFETCH
> window:
> > disabled pci
> > > > 0000:00:04.0:
> > > > > PCI bridge, secondary bus 0000:04 pci
> 0000:00:04.0:
> > IO
> > > window:
> > > > > disabled pci 0000:00:04.0: MEM window:
> disabled
> > pci
> > > > 0000:00:04.0:
> > > > > PREFETCH window: disabled pci 0000:00:05.0:
> PCI
> > bridge,
> > > secondary
> > > > bus
> > > > > 0000:05 pci 0000:00:05.0: IO window:
> disabled pci
> > > 0000:00:05.0:
> > > > MEM
> > > > > window: disabled pci 0000:00:05.0:
> PREFETCH
> > window:
> > > disabled
> > > > pci
> > > > > 0000:00:06.0: PCI bridge, secondary bus
> 0000:06 pci
> > > 0000:00:06.0:
> > > > IO
> > > > > window: disabled pci 0000:00:06.0: MEM
> window:
> > disabled
> > > pci
> > > > > 0000:00:06.0: PREFETCH window: disabled
> pci
> > > 0000:00:07.0: PCI
> > > > bridge,
> > > > > secondary bus 0000:07 pci 0000:00:07.0: IO
> > window:
> > > disabled pci
> > > > > 0000:00:07.0: MEM window: disabled pci
> > 0000:00:07.0:
> > > PREFETCH
> > > > > window: disabled pci 0000:00:08.0: PCI
> bridge,
> > secondary
> > > bus
> > > > 0000:08 pci
> > > > > 0000:00:08.0: IO window: disabled pci
> > 0000:00:08.0:
> > > MEM
> > > > window:
> > > > > disabled pci 0000:00:08.0: PREFETCH
> window:
> > disabled pci
> > > > 0000:00:09.0:
> > > > > PCI bridge, secondary bus 0000:09 pci
> 0000:00:09.0:
> > IO
> > > window:
> > > > > 0x3000-0x3fff pci 0000:00:09.0: MEM
> window:
> > > > 0xb1b00000-0xb1cfffff pci
> > > > > 0000:00:09.0: PREFETCH window:
> > > > 0x000000b1d00000-0x000000b1efffff pci
> > > > > 0000:00:0a.0: PCI bridge, secondary bus
> 0000:0a pci
> > > 0000:00:0a.0:
> > > > IO
> > > > > window: disabled pci 0000:00:0a.0: MEM
> window:
> > disabled
> > > pci
> > > > > 0000:00:0a.0: PREFETCH window: disabled
> pci
> > > 0000:00:1c.0: PCI
> > > > bridge,
> > > > > secondary bus 0000:0b pci 0000:00:1c.0: IO
> > window:
> > > disabled pci
> > > > > 0000:00:1c.0: MEM window: disabled pci
> > 0000:00:1c.0:
> > > PREFETCH
> > > > > window: disabled pci 0000:00:1c.4: PCI
> bridge,
> > secondary
> > > bus
> > > > 0000:0c pci
> > > > > 0000:00:1c.4: IO window: disabled pci
> > 0000:00:1c.4:
> > > MEM
> > > > window:
> > > > > 0xb1000000-0xb18fffff pci 0000:00:1c.4:
> PREFETCH
> > window:
> > > > > 0x000000b0000000-0x000000b0ffffff pci
> 0000:00:1c.5:
> > PCI
> > > bridge,
> > > > > secondary bus 0000:0d pci 0000:00:1c.5: IO
> > window:
> > > disabled pci
> > > > > 0000:00:1c.5: MEM window: disabled pci
> > 0000:00:1c.5:
> > > PREFETCH
> > > > > window: disabled pci 0000:00:1e.0: PCI
> bridge,
> > secondary
> > > bus
> > > > 0000:0e pci
> > > > > 0000:00:1e.0: IO window: disabled pci
> > 0000:00:1e.0:
> > > MEM
> > > > window:
> > > > > disabled pci 0000:00:1e.0: PREFETCH
> window:
> > disabled pci
> > > > 0000:00:01.0:
> > > > > PCI INT A -> GSI 28 (level, low) -> IRQ 28
> pci
> > > 0000:00:02.0: PCI
> > > > INT A
> > > > > -> GSI 29 (level, low) -> IRQ 29 pci
> 0000:00:03.0:
> > PCI INT
> > > A ->
> > > > GSI 24
> > > > > (level, low) -> IRQ 24 pci 0000:00:04.0: PCI
> INT A
> > -> GSI
> > > 25
> > > > (level,
> > > > > low) -> IRQ 25 pci 0000:00:05.0: PCI INT A
> -> GSI
> > 26
> > > (level, low)
> > > > -> IRQ
> > > > > 26 pci 0000:00:06.0: PCI INT A -> GSI 27
> (level,
> > low) ->
> > > IRQ 27
> > > > pci
> > > > > 0000:00:07.0: PCI INT A -> GSI 30 (level,
> low) ->
> > IRQ 30
> > > pci
> > > > > 0000:00:08.0: PCI INT A -> GSI 31 (level,
> low) ->
> > IRQ 31
> > > pci
> > > > > 0000:00:09.0: PCI INT A -> GSI 32 (level,
> low) ->
> > IRQ 32
> > > pci
> > > > > 0000:00:0a.0: PCI INT A -> GSI 33 (level,
> low) ->
> > IRQ 33
> > > pci
> > > > > 0000:00:1c.0: PCI INT A -> GSI 16 (level,
> low) ->
> > IRQ 16
> > > > > xen_allocate_pirq: returning irq 16 for gsi
> 16
> > Already
> > > setup the
> > > > GSI :16
> > > > > pci 0000:00:1c.4: PCI INT A -> GSI 16
> (level, low)
> > -> IRQ
> > > 16 pci
> > > > > 0000:00:1c.5: PCI INT B -> GSI 17 (level,
> low) ->
> > IRQ 17
> > > NET:
> > > > Registered
> > > > > protocol family 2 IP route cache hash table
> > entries: 65536
> > > > (order: 7,
> > > > > 524288 bytes) TCP established hash table
> entries:
> > 262144
> > > (order:
> > > > 10,
> > > > > 4194304 bytes) TCP bind hash table entries:
> 65536
> > (order:
> > > 10,
> > > > 4718592
> > > > > bytes) TCP: Hash tables configured
> (established
> > 262144
> > > bind
> > > > 65536) TCP
> > > > > reno registered NET: Registered protocol
> family 1
> > pci
> > > > 0000:01:00.0:
> > > > > Disabling L0s pci 0000:01:00.1: Disabling
> L0s
> > Trying to
> > > unpack
> > > > rootfs
> > > > > image as initramfs... Freeing initrd memory:
> 6474k
> > freed
> > > DMA-API:
> > > > > preallocated 32768 debug entries DMA-API:
> debugging
> > > enabled by
> > > > kernel
> > > > > config PCI-DMA: Using software bounce
> buffering for
> > IO
> > > (SWIOTLB)
> > > > DMA:
> > > > > Placing 64MB software IO TLB between
> > ffff880007525000 -
> > > > ffff88000b525000
> > > > > DMA: software IO TLB at phys 0x7525000 -
> 0xb525000
> > audit:
> > > > initializing
> > > > > netlink socket (disabled) type=2000
> > > audit(1268750702.035:1):
> > > > initialized
> > > > > HugeTLB registered 2 MB page size,
> pre-allocated 0
> > pages
> > > VFS:
> > > > Disk
> > > > > quotas dquot_6.5.2 Dquot-cache hash table
> entries:
> > 512
> > > (order 0,
> > > > 4096
> > > > > bytes) msgmni has been set to 2970
> cryptomgr_test
> > used
> > > greatest
> > > > stack
> > > > > depth: 5864 bytes left cryptomgr_test used
> greatest
> > stack
> > > depth:
> > > > 5816
> > > > > bytes left alg: No test for stdrng (krng)
> Block
> > layer SCSI
> > > > generic (bsg)
> > > > > driver version 0.4 loaded (major 252) io
> scheduler
> > noop
> > > > registered io
> > > > > scheduler anticipatory registered io
> scheduler
> > deadline
> > > > registered io
> > > > > scheduler cfq registered (default)
> pci_hotplug: PCI
> > Hot
> > > Plug PCI
> > > > Core
> > > > > version: 0.5 pciehp 0000:00:09.0:pcie04: HPC
> > vendor_id
> > > 8086
> > > > device_id
> > > > > 3410 ss_vid 0 ss_did 0 pciehp: PCI Express
> Hot Plug
> > > Controller
> > > > Driver
> > > > > version: 0.4 acpiphp: ACPI Hot Plug PCI
> Controller
> > Driver
> > > > version: 0.5
> > > > > acpiphp_glue: Slot 2 already registered by
> another
> > hotplug
> > > driver
> > > > > acpiphp_glue: Slot 2 already registered by
> another
> > hotplug
> > > driver
> > > > > acpiphp_glue: Slot 2 already registered by
> another
> > hotplug
> > > driver
> > > > > acpiphp_glue: Slot 2 already registered by
> another
> > hotplug
> > > driver
> > > > > acpiphp_glue: Slot 2 already registered by
> another
> > hotplug
> > > driver
> > > > > acpiphp_glue: Slot 2 already registered by
> another
> > hotplug
> > > driver
> > > > > acpiphp_glue: Slot 2 already registered by
> another
> > hotplug
> > > driver
> > > > > acpiphp_glue: Slot 2 already registered by
> another
> > hotplug
> > > driver
> > > > > pci-stub: invalid id string "" input: Sleep
> Button
> > as
> > > > >
> > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
> > > ACPI:
> > > > Sleep
> > > > > Button [SLPB] input: Power Button as
> > > > >
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI:
> > Power
> > > Button
> > > > [PWRF]
> > > > > registering netback hpet_acpi_add: no
> address or
> > irqs in
> > > _CRS
> > > > > Non-volatile memory driver v1.3 Linux
> agpgart
> > interface
> > > v0.103
> > > > Serial:
> > > > > 8250/16550 driver, 4 ports, IRQ sharing
> enabled
> > > serial8250: ttyS1
> > > > at I/O
> > > > > 0x2f8 (irq = 3) is a 16550A brd: module
> loaded
> > loop:
> > > module
> > > > loaded
> > > > > input: Macintosh mouse button emulation as
> > > > /devices/virtual/input/input2
> > > > > ahci 0000:00:1f.2: PCI INT A -> GSI 19
> (level, low)
> > -> IRQ
> > > 19
> > > > ahci
> > > > > 0000:00:1f.2: AHCI 0001.0200 32 slots 6
> ports 3
> > Gbps 0x3f
> > > impl
> > > > SATA mode
> > > > > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm
> led clo
> > pio
> > > slum part
> > > > ccc
> > > > > ems scsi0 : ahci scsi1 : ahci scsi2 : ahci
> scsi3 :
> > ahci
> > > scsi4 :
> > > > ahci
> > > > > scsi5 : ahci ata1: SATA max UDMA/133
> irq_stat
> > 0x00400040,
> > > > connection
> > > > > status changed irq 2996 ata2: SATA max
> UDMA/133
> > abar
> > > > m2048@0xb1a00000
> > > > > port 0xb1a00180 irq 2996 ata3: SATA max
> UDMA/133
> > abar
> > > > m2048@0xb1a00000
> > > > > port 0xb1a00200 irq 2996 ata4: SATA max
> UDMA/133
> > abar
> > > > m2048@0xb1a00000
> > > > > port 0xb1a00280 irq 2996 ata5: SATA max
> UDMA/133
> > abar
> > > > m2048@0xb1a00000
> > > > > port 0xb1a00300 irq 2996 ata6: SATA max
> UDMA/133
> > abar
> > > > m2048@0xb1a00000
> > > > > port 0xb1a00380 irq 2996 Fixed MDIO Bus:
> probed
> > ehci_hcd:
> > > USB 2.0
> > > > > 'Enhanced' Host Controller (EHCI) Driver
> ehci_hcd
> > > 0000:00:1a.7:
> > > > PCI INT
> > > > > C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd
> > 0000:00:1a.7:
> > > EHCI
> > > > Host
> > > > > Controller ehci_hcd 0000:00:1a.7: new USB
> bus
> > registered,
> > > > assigned bus
> > > > > number 1 ehci_hcd 0000:00:1a.7: debug port 1
> > ehci_hcd
> > > > 0000:00:1a.7: irq
> > > > > 18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7:
> USB
> > 2.0
> > > started,
> > > > EHCI 1.00
> > > > > usb usb1: New USB device found,
> idVendor=1d6b,
> > > idProduct=0002 usb
> > > > usb1:
> > > > > New USB device strings: Mfr=3, Product=2,
> > SerialNumber=1
> > > usb
> > > > usb1:
> > > > > Product: EHCI Host Controller usb usb1:
> > Manufacturer:
> > > Linux
> > > > 2.6.32.9
> > > > > ehci_hcd usb usb1: SerialNumber:
> 0000:00:1a.7 usb
> > usb1:
> > > > configuration #1
> > > > > chosen from 1 choice hub 1-0:1.0: USB hub
> found hub
> > > 1-0:1.0: 6
> > > > ports
> > > > > detected ehci_hcd 0000:00:1d.7: PCI INT A ->
> GSI 23
> > > (level, low)
> > > > -> IRQ
> > > > > 23 ehci_hcd 0000:00:1d.7: EHCI Host
> Controller
> > ehci_hcd
> > > > 0000:00:1d.7:
> > > > > new USB bus registered, assigned bus number
> 2
> > ehci_hcd
> > > > 0000:00:1d.7:
> > > > > debug port 1 ehci_hcd 0000:00:1d.7: irq 23,
> io mem
> > > 0xb1a01000
> > > > ehci_hcd
> > > > > 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb
> usb2:
> > New USB
> > > device
> > > > found,
> > > > > idVendor=1d6b, idProduct=0002 usb usb2: New
> USB
> > device
> > > strings:
> > > > Mfr=3,
> > > > > Product=2, SerialNumber=1 usb usb2: Product:
> EHCI
> > Host
> > > Controller
> > > > usb
> > > > > usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd
> usb
> > usb2:
> > > > SerialNumber:
> > > > > 0000:00:1d.7 usb usb2: configuration #1
> chosen from
> > 1
> > > choice hub
> > > > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports
> > detected
> > > ohci_hcd:
> > > > USB 1.1
> > > > > 'Open' Host Controller (OHCI) Driver
> uhci_hcd: USB
> > > Universal Host
> > > > > Controller Interface driver
> xen_allocate_pirq:
> > returning
> > > irq 16
> > > > for gsi
> > > > > 16 Already setup the GSI :16 uhci_hcd
> 0000:00:1a.0:
> > PCI
> > > INT A ->
> > > > GSI 16
> > > > > (level, low) -> IRQ 16 uhci_hcd
> 0000:00:1a.0: UHCI
> > Host
> > > > Controller
> > > > > uhci_hcd 0000:00:1a.0: new USB bus
> registered,
> > assigned
> > > bus
> > > > number 3
> > > > > uhci_hcd 0000:00:1a.0: irq 16, io base
> 0x000020e0
> > usb
> > > usb3: New
> > > > USB
> > > > > device found, idVendor=1d6b, idProduct=0001
> usb
> > usb3: New
> > > USB
> > > > device
> > > > > strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3:
> > > Product: UHCI
> > > > Host
> > > > > Controller usb usb3: Manufacturer: Linux
> 2.6.32.9
> > uhci_hcd
> > > usb
> > > > usb3:
> > > > > SerialNumber: 0000:00:1a.0 usb usb3:
> configuration
> > #1
> > > chosen from
> > > > 1
> > > > > choice hub 3-0:1.0: USB hub found hub
> 3-0:1.0: 2
> > ports
> > > detected
> > > > uhci_hcd
> > > > > 0000:00:1a.1: PCI INT B -> GSI 21 (level,
> low) ->
> > IRQ 21
> > > uhci_hcd
> > > > > 0000:00:1a.1: UHCI Host Controller uhci_hcd
> > 0000:00:1a.1:
> > > new USB
> > > > bus
> > > > > registered, assigned bus number 4 uhci_hcd
> > 0000:00:1a.1:
> > > irq 21,
> > > > io base
> > > > > 0x000020c0 usb usb4: New USB device found,
> > idVendor=1d6b,
> > > > idProduct=0001
> > > > > usb usb4: New USB device strings: Mfr=3,
> Product=2,
> > > > SerialNumber=1 usb
> > > > > usb4: Product: UHCI Host Controller usb
> usb4:
> > > Manufacturer: Linux
> > > > > 2.6.32.9 uhci_hcd usb usb4: SerialNumber:
> > 0000:00:1a.1 usb
> > > usb4:
> > > > > configuration #1 chosen from 1 choice hub
> 4-0:1.0:
> > USB hub
> > > found
> > > > hub
> > > > > 4-0:1.0: 2 ports detected xen_allocate_pirq:
> > returning irq
> > > 19 for
> > > > gsi 19
> > > > > Already setup the GSI :19 uhci_hcd
> 0000:00:1a.2:
> > PCI INT D
> > > -> GSI
> > > > 19
> > > > > (level, low) -> IRQ 19 uhci_hcd
> 0000:00:1a.2: UHCI
> > Host
> > > > Controller
> > > > > uhci_hcd 0000:00:1a.2: new USB bus
> registered,
> > assigned
> > > bus
> > > > number 5
> > > > > uhci_hcd 0000:00:1a.2: irq 19, io base
> 0x000020a0
> > usb
> > > usb5: New
> > > > USB
> > > > > device found, idVendor=1d6b, idProduct=0001
> usb
> > usb5: New
> > > USB
> > > > device
> > > > > strings: Mfr=3, Product=2, SerialNumber=1
> usb usb5:
> > > Product: UHCI
> > > > Host
> > > > > Controller usb usb5: Manufacturer: Linux
> 2.6.32.9
> > uhci_hcd
> > > usb
> > > > usb5:
> > > > > SerialNumber: 0000:00:1a.2 usb usb5:
> configuration
> > #1
> > > chosen from
> > > > 1
> > > > > choice hub 5-0:1.0: USB hub found hub
> 5-0:1.0: 2
> > ports
> > > detected
> > > > > xen_allocate_pirq: returning irq 23 for gsi
> 23
> > Already
> > > setup the
> > > > GSI :23
> > > > > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23
> (level,
> > low) ->
> > > IRQ 23
> > > > > uhci_hcd 0000:00:1d.0: UHCI Host Controller
> > uhci_hcd
> > > > 0000:00:1d.0: new
> > > > > USB bus registered, assigned bus number 6
> uhci_hcd
> > > 0000:00:1d.0:
> > > > irq 23,
> > > > > io base 0x00002080 usb usb6: New USB device
> found,
> > > idVendor=1d6b,
> > > > > idProduct=0001 usb usb6: New USB device
> strings:
> > Mfr=3,
> > > > Product=2,
> > > > > SerialNumber=1 usb usb6: Product: UHCI Host
> > Controller usb
> > > usb6:
> > > > > Manufacturer: Linux 2.6.32.9 uhci_hcd usb
> usb6:
> > > SerialNumber:
> > > > > 0000:00:1d.0 usb usb6: configuration #1
> chosen from
> > 1
> > > choice hub
> > > > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports
> > detected
> > > > xen_allocate_pirq:
> > > > > returning irq 19 for gsi 19 Already setup
> the GSI
> > :19
> > > uhci_hcd
> > > > > 0000:00:1d.1: PCI INT B -> GSI 19 (level,
> low) ->
> > IRQ 19
> > > uhci_hcd
> > > > > 0000:00:1d.1: UHCI Host Controller uhci_hcd
> > 0000:00:1d.1:
> > > new USB
> > > > bus
> > > > > registered, assigned bus number 7 uhci_hcd
> > 0000:00:1d.1:
> > > irq 19,
> > > > io base
> > > > > 0x00002060 usb usb7: New USB device found,
> > idVendor=1d6b,
> > > > idProduct=0001
> > > > > usb usb7: New USB device strings: Mfr=3,
> Product=2,
> > > > SerialNumber=1 usb
> > > > > usb7: Product: UHCI Host Controller usb
> usb7:
> > > Manufacturer: Linux
> > > > > 2.6.32.9 uhci_hcd usb usb7: SerialNumber:
> > 0000:00:1d.1 usb
> > > usb7:
> > > > > configuration #1 chosen from 1 choice hub
> 7-0:1.0:
> > USB hub
> > > found
> > > > hub
> > > > > 7-0:1.0: 2 ports detected xen_allocate_pirq:
> > returning irq
> > > 18 for
> > > > gsi 18
> > > > > Already setup the GSI :18 uhci_hcd
> 0000:00:1d.2:
> > PCI INT C
> > > -> GSI
> > > > 18
> > > > > (level, low) -> IRQ 18 uhci_hcd
> 0000:00:1d.2: UHCI
> > Host
> > > > Controller
> > > > > uhci_hcd 0000:00:1d.2: new USB bus
> registered,
> > assigned
> > > bus
> > > > number 8
> > > > > uhci_hcd 0000:00:1d.2: irq 18, io base
> 0x00002040
> > usb
> > > usb8: New
> > > > USB
> > > > > device found, idVendor=1d6b, idProduct=0001
> usb
> > usb8: New
> > > USB
> > > > device
> > > > > strings: Mfr=3, Product=2, SerialNumber=1
> usb usb8:
> > > Product: UHCI
> > > > Host
> > >
> >
> > References
> >
> > Visible links
> > 1. mailto:[20]pasik@xxxxxx
> > 2. mailto:[21]pasik@xxxxxx
> > 3. mailto:[22]pasik@xxxxxx
> > 4. mailto:[23]pasik@xxxxxx
> > 5. mailto:[24]pasik@xxxxxx
> > 6.
> [25]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 7.
> [26]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 8. mailto:[27]pasik@xxxxxx
> > 9.
> [28]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 10.
> [29]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 11. mailto:[30]pasik@xxxxxx
> > 12. mailto:[31]pasik@xxxxxx
> > 13.
> [32]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 14.
> [33]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 15. mailto:[34]pasik@xxxxxx
> > 16.
> [35]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 17.
> [36]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 18. mailto:[37]pasik@xxxxxx
>
> References
>
> Visible links
> 1. mailto:pasik@xxxxxx
> 2. mailto:pasik@xxxxxx
> 3. mailto:pasik@xxxxxx
> 4. mailto:pasik@xxxxxx
> 5. mailto:pasik@xxxxxx
> 6. mailto:pasik@xxxxxx
> 7. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 8. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 9. mailto:pasik@xxxxxx
> 10. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 11. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 12. mailto:pasik@xxxxxx
> 13. mailto:pasik@xxxxxx
> 14. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 15. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 16. mailto:pasik@xxxxxx
> 17. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 18. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 19. mailto:pasik@xxxxxx
> 20. mailto:pasik@xxxxxx
> 21. mailto:pasik@xxxxxx
> 22. mailto:pasik@xxxxxx
> 23. mailto:pasik@xxxxxx
> 24. mailto:pasik@xxxxxx
> 25. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 26. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 27. mailto:pasik@xxxxxx
> 28. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 29. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 30. mailto:pasik@xxxxxx
> 31. mailto:pasik@xxxxxx
> 32. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 33. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 34. mailto:pasik@xxxxxx
> 35. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 36. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 37. mailto:pasik@xxxxxx

18.doc
Description: MS-Word document

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

WARNING - OLD ARCHIVES

xen-devel

Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: Unable to locate IOA