domid: 7
qemu: the number of cpus is 1
Watching /local/domain/0/device-model/7/logdirty/cmd
Watching /local/domain/0/device-model/7/command
char device redirected to /dev/pts/3
qemu_map_cache_init nr_buckets = 10000 size 4194304
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = 2b116c12-49dc-8442-cd5a-6a5b51d4f4e2
Time offset set 0
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/7/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error. /vm/2b116c12-49dc-8442-cd5a-6a5b51d4f4e2/vncpasswd.
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
xs_read(/local/domain/7/log-throttling): read error
dm-command: hot insert pass-through pci dev 
register_real_device: Assigning real physical device 01:00.0 ...
pt_iomul_init: Error: pt_iomul_init: No such device: setup io multiplexing failed! 0x1:0x0.0x0
pt_register_regions: IO region registered (size=0x00020000 base_addr=0xf0800000)
pt_register_regions: IO region registered (size=0x00000020 base_addr=0x00003101)
pt_register_regions: IO region registered (size=0x00004000 base_addr=0xf0840000)
pt_register_regions: Expansion ROM registered (size=0x00400000 base_addr=0xf1000000)
pt_msix_init: get MSI-X table bar base f0840000
pt_msix_init: table_off = 0, total_entries = 10
pt_msix_init: errno = 19
pt_msix_init: mapping physical MSI-X table to 2af205e3b000
register_real_device: Real physical device 01:00.0 registered successfuly!
IRQ type = INTx
pt_pci_write_config: Warning: Guest attempt to set address to unused Base Address Register. [00:04.0][Offset:14h][Length:4]
cirrus vga map change while on lfb mode
pt_pci_write_config: Warning: Guest attempt to set address to unused Base Address Register. [00:04.0][Offset:14h][Length:4]
pt_iomem_map: e_phys=f3800000 maddr=f0800000 type=0 len=131072 index=0 first_map=1
pt_iomem_map: e_phys=f3820000 maddr=f0840000 type=0 len=16384 index=3 first_map=1
pt_ioport_map: e_phys=c100 pio_base=3100 len=32 index=2 first_map=1
mapping vram to f0000000 - f0400000
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.
pt_pci_write_config: Warning: Guest attempt to set address to unused Base Address Register. [00:04.0][Offset:14h][Length:4]
pt_ioport_map: e_phys=ffff pio_base=3100 len=32 index=2 first_map=0
pt_ioport_map: e_phys=c100 pio_base=3100 len=32 index=2 first_map=0
pt_msix_update_one: Update msix entry 0 with pirq 0 gvec 51
pt_msix_update_one: Error: Updating msix irq info for entry 0
pt_msix_update_one: Error: Unmapping of MSI-X failed.
pt_msix_update_one: Update msix entry 1 with pirq 37 gvec 59
pt_msix_update_one: Update msix entry 2 with pirq 36 gvec 61
pci_msix_writel: Error: Can't update msix entry 0 since MSI-X is already                 function.
pci_msix_writel: Error: Can't update msix entry 0 since MSI-X is already                 function.
pci_msix_writel: Error: Can't update msix entry 0 since MSI-X is already                 function.
pci_msix_writel: Error: Can't update msix entry 1 since MSI-X is already                 function.
pci_msix_writel: Error: Can't update msix entry 1 since MSI-X is already                 function.
pci_msix_writel: Error: Can't update msix entry 1 since MSI-X is already                 function.
pci_msix_writel: Error: Can't update msix entry 2 since MSI-X is already                 function.
pci_msix_writel: Error: Can't update msix entry 2 since MSI-X is already                 function.
pci_msix_writel: Error: Can't update msix entry 2 since MSI-X is already                 function.