How do i know if i'm using 'ack_type_new', what does it mean?
Do u have any idea, on how i can check inside domU windows XP (using
WinDBG of-course) if the virtual local APIC/IOAPIC has EOI the
interrupt?
It happens every time... it's 100% reproduceable on that Dell machine.
On Thu, Nov 26, 2009 at 3:40 AM, Jiang, Yunhong <yunhong.jiang@xxxxxxxxx> wrote:
>
>
> xen-devel-bounces@xxxxxxxxxxxxxxxxxxx wrote:
>> After digging more into this problem, i found out that the problem is
>> because the interrupt generated on the wlan device, isn't being
>> transfered to the domain, for some reason, after the device was
>> re-enablked in Windows. I saw that, by connecting to the xen console,
>> and then clicking 'i', and i got the following lines:
>> ...
>> (XEN) Vec192 IRQ 17: type=IO-APIC-level status=00000010
>> in-flight=1 domain-list=0: 17(----),3: 17(---M),
>> ...
>> (XEN) Apic 0x00, Pin 17: vector=192, delivery_mode=1,
>> dest_mode=logical, delivery_status=1, polarity=1, irr=1,
>> trigger=level, mask=0 ....
>>
>> You can see, that the interrupt 17, which is in my Windows domU, was
>> generated, but still weren't injected to the CPU (the 'irr' is 1). So,
>> i guess that this is what is causing the problem.
>> Now, the only issue left, is why the hell, the interrupt isn't being
>> injected to the domain?
>
> I assume you are using ack_type_new on your system, am I right?
> Usually it means guest has not EOI the interrupt, so that host has no chance
> to EOI the physical IOAPIC. Can you check the virtual Local APIC/IOAPIC for
> the guest to see if we have any finding?
> BTW, does it happen everytime?
>
> --jyh
>
>>
>> Has anyone has any idea about it?
>>
>> On Wed, Nov 25, 2009 at 6:31 PM, Tom Rotenberg
>> <tom.rotenberg@xxxxxxxxx> wrote:
>>> Well, i just performed some tests, and it doesn't look like the
>>> disable_msi/enable_msi functions in pciback are being called at all
>>> (moreover, not in the disable-enable from domU Windows XP), so i
>>> don't think it's related. Also, since when, a config space write
>>> from a guest domU triggers code in the pciback?
>>>
>>> I think that it's not the problem here...
>>> Maybe someone from the XCI can shed some light here, and tell us how
>>> they solve it (or not)? since their code should run on the same Dell
>>> machines, no?
>>>
>>> On Wed, Nov 25, 2009 at 5:13 PM, Kamala Narasimhan
>>> <Kamala.Narasimhan@xxxxxxxxxx> wrote:
>>>> I shouldn't have suggested that you build without pciback;
>> I got carried away trying to make it simple for you :-);
>> Obviously you would need it and I should have stopped with
>> suggesting that you tweak it.
>>>>
>>>> Here is the thought process that led to my suggestion -
>>>>
>>>> Clearly, that bit is getting changed as indicated in your
>> log. It is unlikely that the guest is triggering that change
>> which makes pciback a potential candidate to suspect as it
>> does change pci configuration space bits. I need to add some
>> tracing and look at the path of execution to answer some of
>> your specific questions accurately and I won't be able to do
>> that right now but I can give some context to help you based
>> on what I have experienced in comparable situation and based
>> on that I would say pciback is one place to suspect. To be a
>> bit more specific I would say look into
>> pciback_enable_msi/pciback_disable_msi code, add some tracing
>> there, observe whether or not that code path is taken when the
>> device is disabled/reenabled within guest etc. To reiterate,
>> these are mere suggestions but looks plausible based on prior
>> observations.
>>>>
>>>> Kamala
>>>>
>>>>> -----Original Message-----
>>>>> From: Tom Rotenberg [mailto:tom.rotenberg@xxxxxxxxx]
>>>>> Sent: Wednesday, November 25, 2009 9:22 AM
>>>>> To: Kamala Narasimhan
>>>>> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx; xci-devel@xxxxxxxxxxxxxxxxxxx
>>>>> Subject: Re: [Xci-devel] Porblem with disabling and then
>>>>> re-enabling a PT device in Windows
>>>>>
>>>>> I am not sure i undertand how to test it...
>>>>> 1) Avoid doing FLR for the device - isn';t that done only when
>>>>> building the domain? does that happen when i disable the device in
>>>>> domU? 2) Don't build pciback - and then, i won't bind the wlan
>>>>> device to pciback? and change the xend scripts which check for it?
>>>>> 3) Comment out the relevant code - which code??
>>>>>
>>>>> I also don't understand, how could it be that the pciback device is
>>>>> "messing" with it? isn't it supposed to be in-active when the
>>>>> device is being used in PT?
>>>>>
>>>>> Tom
>>>>>
>>>>> On Wed, Nov 25, 2009 at 4:12 PM, Kamala Narasimhan
>>>>> <Kamala.Narasimhan@xxxxxxxxxx> wrote:
>>>>>> There is a chance pciback is changing the bit you are referring
>>>>> to. To confirm that, just for testing purpose you might want to
>>>>> avoid FLR for that device or simply not build pciback or comment
>>>>> out relevant code in that module whichever is easier and see if
>>>>> that helps. If it does, you can then look into fixing the problem
>>>>> the right way.
>>>>>>
>>>>>> Kamala
>>>>>>
>>>>>>> -----Original Message-----
>>>>>>> From: xci-devel-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xci-devel-
>>>>>>> bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Tom Rotenberg
>>>>>>> Sent: Wednesday, November 25, 2009 8:09 AM
>>>>>>> To: xen-devel@xxxxxxxxxxxxxxxxxxx; xci-devel@xxxxxxxxxxxxxxxxxxx
>>>>>>> Subject: [Xci-devel] Porblem with disabling and then re-enabling
>>>>>>> a PT device in Windows
>>>>>>>
>>>>>>> Hi All,
>>>>>>>
>>>>>>> (This is a continuation to my previous mail, but since it looks
>>>>>>> like a different problem - i decided to open a new thread for it)
>>>>>>>
>>>>>>> ----
>>>>>>> Problem Description:
>>>>>>> ----
>>>>>>> I am doing pass-through of an Intel wireless LAN device to a
>>>>>>> Windows XP domU (my machine is Dell e6400), and it looks like
>>>>>>> it's working ok. Then, i disable the device using Windows device
>>>>>>> manager, and the device is now disabled, after that i re-enable
>>>>>>> the device, and Windows re-enables the device correctly.
>>>>>>> However, the wlan device seems to malfunction (it can't turn on
>>>>>>> the WiFi of the computer), and can't connect to wireless
>>>>>>> networks. I tried it, both with MSI translation on, and with MSI
>>>>>>> translation off - it doesn't matter.
>>>>>>>
>>>>>>> ----
>>>>>>> My analysis:
>>>>>>> ----
>>>>>>> 1) Well, taking a look at the real PCI config space, before
>>>>>>> disable and after the (last) enable, shows that the difference
>>>>>>> is at the Intx bit (read-only bit 3 at status register (offset
>>>>>>> 0x6) at the PCI config space). Before disable, that bit was 0,
>>>>>>> and after the last enable that bit was 1. This, according to my
>>>>>>> understanding, means that the device is asserting it's IntX ,
>>>>>>> and probably waiting for someone to handle it, no?
>>>>>>>
>>>>>>> 2) When i tried to track when did this bit was changed - i added
>>>>>>> a code which in every PCI config read, checks if that bit was
>>>>>>> changed - and added a print when it changed. The proper lines in
>>>>>>> the qemu log looks like this: ...
>>>>>>> pt_pci_read_config: [00:01.0]: address=00f0 val=0x00000000 len=2
>>>>>>> ACPI PCI hotplug: read addr=0x10c6, val=0x0f.
>>>>>>> ACPI PCI hotplug: read addr=0x10c6, val=0x0f.
>>>>>>> pt_pci_read_config: TEST CODE: STATUS CHNAGED! OLD: 0x10, NEW:
>>>>>>> 0x18 pt_pci_read_config: [00:01.0]: address=0000 val=0x00008086
>>>>>>> len=2 ...
>>>>>>>
>>>>>>> This implies that the bit was changed, about the same time that
>>>>>>> Windows tried to start using it (because, i assume that it tried
>>>>>>> using it, just after questioning the ACPI for the existence of
>>>>>>> the device). No?
>>>>>>>
>>>>>>>
>>>>>>> Can someone help me with this?
>>>>>>>
>>>>>>> (BTW - i am using Xen 3.4)
>>>>>>>
>>>>>>> Tom
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Xci-devel mailing list
>>>>>>> Xci-devel@xxxxxxxxxxxxxxxxxxx
>>>>>>> http://lists.xensource.com/mailman/listinfo/xci-devel
>>>>>>
>>>>
>>>
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@xxxxxxxxxxxxxxxxxxx
>> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home