Resolve the dependencey between acpi processor
driver(driver/acpi/processor_core.c) and xen acpi processor
driver(driver/xen/acpi_processor.c), so that the compile can pass when
CONFIG_ACPI_PROCESSOR=m
From: Yu Ke <ke.yu@xxxxxxxxx>
Signed-off-by: Yu Ke <ke.yu@xxxxxxxxx>
---
drivers/acpi/processor_core.c | 2 -
drivers/acpi/processor_perflib.c | 110 ++++++++++++++++++++++++++++++++-
drivers/xen/acpi_processor.c | 127 ++------------------------------------
include/acpi/processor.h | 10 ++-
include/xen/acpi.h | 5 -
5 files changed, 123 insertions(+), 131 deletions(-)
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 6a35118..b75098d 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -1394,7 +1394,7 @@ static int __cpuinit xen_acpi_processor_start(struct
acpi_device *device)
xen_acpi_processor_power_init(pr, device);
- result = processor_cntl_xen_prepare(pr);
+ result = xen_acpi_processor_get_performance(pr);
if (result)
goto end;
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index f17e740..84db5c8 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -347,7 +347,7 @@ static int acpi_processor_get_performance_states(struct
acpi_processor *pr)
return result;
}
-int acpi_processor_get_performance_info(struct acpi_processor *pr)
+static int acpi_processor_get_performance_info(struct acpi_processor *pr)
{
int result = 0;
acpi_status status = AE_OK;
@@ -449,7 +449,7 @@ int acpi_processor_notify_smm(struct module *calling_module)
EXPORT_SYMBOL(acpi_processor_notify_smm);
-int acpi_processor_get_psd(struct acpi_processor *pr)
+static int acpi_processor_get_psd(struct acpi_processor *pr)
{
int result = 0;
acpi_status status = AE_OK;
@@ -730,3 +730,109 @@ acpi_processor_unregister_performance(struct
acpi_processor_performance
}
EXPORT_SYMBOL(acpi_processor_unregister_performance);
+
+/* Xen specific interface */
+
+static int xen_processor_notify_smm(void)
+{
+ acpi_status status;
+ static int is_done;
+
+ /* only need successfully notify BIOS once */
+ /* avoid double notification which may lead to unexpected result */
+ if (is_done)
+ return 0;
+
+ /* Can't write pstate_cnt to smi_cmd if either value is zero */
+ if ((!acpi_gbl_FADT.smi_command) || (!acpi_gbl_FADT.pstate_control)) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No SMI port or pstate_cnt\n"));
+ return 0;
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Writing pstate_cnt [0x%x] to smi_cmd [0x%x]\n",
+ acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command));
+
+ status = acpi_os_write_port(acpi_gbl_FADT.smi_command,
+ (u32) acpi_gbl_FADT.pstate_control, 8);
+ if (ACPI_FAILURE(status))
+ return status;
+
+ is_done = 1;
+
+ return 0;
+}
+
+/*
+ * Existing ACPI module does parse performance states at some point,
+ * when acpi-cpufreq driver is loaded which however is something
+ * we'd like to disable to avoid confliction with xen PM
+ * logic. So we have to collect raw performance information here
+ * when ACPI processor object is found and started.
+ */
+int xen_acpi_processor_get_performance(struct acpi_processor *pr)
+{
+ int ret;
+ struct acpi_processor_performance *perf;
+ struct acpi_psd_package *pdomain;
+
+ if (pr->performance)
+ return -EBUSY;
+
+ perf = kzalloc(sizeof(struct acpi_processor_performance), GFP_KERNEL);
+ if (!perf)
+ return -ENOMEM;
+
+ pr->performance = perf;
+ /* Get basic performance state information */
+ ret = acpi_processor_get_performance_info(pr);
+ if (ret < 0)
+ goto err_out;
+
+ /*
+ * Well, here we need retrieve performance dependency information
+ * from _PSD object. The reason why existing interface is not used
+ * is due to the reason that existing interface sticks to Linux cpu
+ * id to construct some bitmap, however we want to split ACPI
+ * processor objects from Linux cpu id logic. For example, even
+ * when Linux is configured as UP, we still want to parse all ACPI
+ * processor objects to xen. In this case, it's preferred
+ * to use ACPI ID instead.
+ */
+ pdomain = &pr->performance->domain_info;
+ pdomain->num_processors = 0;
+ ret = acpi_processor_get_psd(pr);
+ if (ret < 0) {
+ /*
+ * _PSD is optional - assume no coordination if absent (or
+ * broken), matching native kernels' behavior.
+ */
+ pdomain->num_entries = ACPI_PSD_REV0_ENTRIES;
+ pdomain->revision = ACPI_PSD_REV0_REVISION;
+ pdomain->domain = pr->acpi_id;
+ pdomain->coord_type = DOMAIN_COORD_TYPE_SW_ALL;
+ pdomain->num_processors = 1;
+ }
+
+ /* Some sanity check */
+ if ((pdomain->revision != ACPI_PSD_REV0_REVISION) ||
+ (pdomain->num_entries != ACPI_PSD_REV0_ENTRIES) ||
+ ((pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ALL) &&
+ (pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ANY) &&
+ (pdomain->coord_type != DOMAIN_COORD_TYPE_HW_ALL))) {
+ ret = -EINVAL;
+ goto err_out;
+ }
+
+ /* Last step is to notify BIOS that xen exists */
+ xen_processor_notify_smm();
+
+ processor_cntl_xen_notify(pr, PROCESSOR_PM_INIT, PM_TYPE_PERF);
+
+ return 0;
+err_out:
+ pr->performance = NULL;
+ kfree(perf);
+ return ret;
+}
+EXPORT_SYMBOL(xen_acpi_processor_get_performance);
diff --git a/drivers/xen/acpi_processor.c b/drivers/xen/acpi_processor.c
index 6a4e8e4..7348949 100644
--- a/drivers/xen/acpi_processor.c
+++ b/drivers/xen/acpi_processor.c
@@ -36,7 +36,6 @@
#include <asm/xen/hypercall.h>
#include <asm/xen/hypervisor.h>
-static int processor_cntl_xen_get_performance(struct acpi_processor *pr);
static int xen_hotplug_notifier(struct acpi_processor *pr, int event);
static struct processor_cntl_xen_ops xen_ops = {
@@ -68,56 +67,31 @@ int processor_cntl_xen_power_cache(int cpu, int cx,
return 0;
}
+EXPORT_SYMBOL(processor_cntl_xen_power_cache);
int processor_cntl_xen(void)
{
return 1;
}
+EXPORT_SYMBOL(processor_cntl_xen);
int processor_cntl_xen_pm(void)
{
return (xen_ops.pm_ops[PM_TYPE_IDLE] != NULL);
}
+EXPORT_SYMBOL(processor_cntl_xen_pm);
int processor_cntl_xen_pmperf(void)
{
return (xen_ops.pm_ops[PM_TYPE_PERF] != NULL);
}
+EXPORT_SYMBOL(processor_cntl_xen_pmperf);
int processor_cntl_xen_pmthr(void)
{
return (xen_ops.pm_ops[PM_TYPE_THR] != NULL);
}
-
-static int processor_notify_smm(void)
-{
- acpi_status status;
- static int is_done;
-
- /* only need successfully notify BIOS once */
- /* avoid double notification which may lead to unexpected result */
- if (is_done)
- return 0;
-
- /* Can't write pstate_cnt to smi_cmd if either value is zero */
- if ((!acpi_gbl_FADT.smi_command) || (!acpi_gbl_FADT.pstate_control)) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No SMI port or pstate_cnt\n"));
- return 0;
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Writing pstate_cnt [0x%x] to smi_cmd [0x%x]\n",
- acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command));
-
- status = acpi_os_write_port(acpi_gbl_FADT.smi_command,
- (u32) acpi_gbl_FADT.pstate_control, 8);
- if (ACPI_FAILURE(status))
- return status;
-
- is_done = 1;
-
- return 0;
-}
+EXPORT_SYMBOL(processor_cntl_xen_pmthr);
int processor_cntl_xen_notify(struct acpi_processor *pr, int event, int type)
{
@@ -143,96 +117,7 @@ int processor_cntl_xen_notify(struct acpi_processor *pr,
int event, int type)
return ret;
}
-
-/*
- * This is called from ACPI processor init, and targeted to hold
- * some tricky housekeeping jobs to satisfy xen.
- * For example, we may put dependency parse stub here for idle
- * and performance state. Those information may be not available
- * if splitting from dom0 control logic like cpufreq driver.
- */
-int processor_cntl_xen_prepare(struct acpi_processor *pr)
-{
-
- /* Initialize performance states */
- if (processor_cntl_xen_pmperf())
- processor_cntl_xen_get_performance(pr);
-
- return 0;
-}
-
-/*
- * Existing ACPI module does parse performance states at some point,
- * when acpi-cpufreq driver is loaded which however is something
- * we'd like to disable to avoid confliction with xen PM
- * logic. So we have to collect raw performance information here
- * when ACPI processor object is found and started.
- */
-static int processor_cntl_xen_get_performance(struct acpi_processor *pr)
-{
- int ret;
- struct acpi_processor_performance *perf;
- struct acpi_psd_package *pdomain;
-
- if (pr->performance)
- return -EBUSY;
-
- perf = kzalloc(sizeof(struct acpi_processor_performance), GFP_KERNEL);
- if (!perf)
- return -ENOMEM;
-
- pr->performance = perf;
- /* Get basic performance state information */
- ret = acpi_processor_get_performance_info(pr);
- if (ret < 0)
- goto err_out;
-
- /*
- * Well, here we need retrieve performance dependency information
- * from _PSD object. The reason why existing interface is not used
- * is due to the reason that existing interface sticks to Linux cpu
- * id to construct some bitmap, however we want to split ACPI
- * processor objects from Linux cpu id logic. For example, even
- * when Linux is configured as UP, we still want to parse all ACPI
- * processor objects to xen. In this case, it's preferred
- * to use ACPI ID instead.
- */
- pdomain = &pr->performance->domain_info;
- pdomain->num_processors = 0;
- ret = acpi_processor_get_psd(pr);
- if (ret < 0) {
- /*
- * _PSD is optional - assume no coordination if absent (or
- * broken), matching native kernels' behavior.
- */
- pdomain->num_entries = ACPI_PSD_REV0_ENTRIES;
- pdomain->revision = ACPI_PSD_REV0_REVISION;
- pdomain->domain = pr->acpi_id;
- pdomain->coord_type = DOMAIN_COORD_TYPE_SW_ALL;
- pdomain->num_processors = 1;
- }
-
- /* Some sanity check */
- if ((pdomain->revision != ACPI_PSD_REV0_REVISION) ||
- (pdomain->num_entries != ACPI_PSD_REV0_ENTRIES) ||
- ((pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ALL) &&
- (pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ANY) &&
- (pdomain->coord_type != DOMAIN_COORD_TYPE_HW_ALL))) {
- ret = -EINVAL;
- goto err_out;
- }
-
- /* Last step is to notify BIOS that xen exists */
- processor_notify_smm();
-
- processor_cntl_xen_notify(pr, PROCESSOR_PM_INIT, PM_TYPE_PERF);
-
- return 0;
-err_out:
- pr->performance = NULL;
- kfree(perf);
- return ret;
-}
+EXPORT_SYMBOL(processor_cntl_xen_notify);
static inline void xen_convert_pct_reg(struct xen_pct_register *xpct,
struct acpi_pct_register *apct)
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index c806ecf..a92b946 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -296,9 +296,8 @@ static inline void acpi_processor_ffh_cstate_enter(struct
acpi_processor_cx
void acpi_processor_ppc_init(void);
void acpi_processor_ppc_exit(void);
int acpi_processor_ppc_has_changed(struct acpi_processor *pr);
-int acpi_processor_get_performance_info(struct acpi_processor *pr);
-int acpi_processor_get_psd(struct acpi_processor *pr);
int xen_acpi_processor_ppc_has_changed(struct acpi_processor *pr);
+int xen_acpi_processor_get_performance(struct acpi_processor *pr);
#else
static inline void acpi_processor_ppc_init(void)
{
@@ -324,6 +323,13 @@ static inline int
xen_acpi_processor_ppc_has_changed(struct acpi_processor *pr)
{
return acpi_processor_ppc_has_changed(pr);
}
+static inline int xen_acpi_processor_get_performance(struct acpi_processor *pr)
+{
+ printk(KERN_WARNING
+ "Warning: xen_acpi_processor_get_performance not
supported\n"
+ "Consider compiling CPUfreq support into your
kernel.\n");
+ return 0;
+}
#endif /* CONFIG_CPU_FREQ */
/* in processor_throttling.c */
diff --git a/include/xen/acpi.h b/include/xen/acpi.h
index 3d73163..3d7ea40 100644
--- a/include/xen/acpi.h
+++ b/include/xen/acpi.h
@@ -54,7 +54,6 @@ extern int processor_cntl_xen(void);
extern int processor_cntl_xen_pm(void);
extern int processor_cntl_xen_pmperf(void);
extern int processor_cntl_xen_pmthr(void);
-extern int processor_cntl_xen_prepare(struct acpi_processor *pr);
extern int processor_cntl_xen_notify(struct acpi_processor *pr,
int event, int type);
extern int processor_cntl_xen_power_cache(int cpu, int cx,
@@ -70,10 +69,6 @@ static inline int processor_cntl_xen_notify(struct
acpi_processor *pr,
{
return 0;
}
-static inline int processor_cntl_xen_prepare(struct acpi_processor *pr)
-{
- return 0;
-}
static inline int processor_cntl_xen_power_cache(int cpu, int cx,
struct acpi_power_register *reg)
{
Best Regards
Ke
resolve-dependency.patch
Description: resolve-dependency.patch
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home