Maybe I missed some referecen to cpu_possible_map, since now the
cpu_possible_map is all 1s.
I have no access to my development machine in hand, will check the usage when I
back to office tomorrow.
--jyh
Keir Fraser wrote:
> Cc'ing patch author (Yunhong Jiang).
>
> -- Keir
>
> On 20/11/2009 22:05, "Sander Eikelenboom" <linux@xxxxxxxxxxxxxx>
> wrote:
>
>>
>> It seems this bug is triggered by changeset #20430, although it
>> doesn't seem to change hpet.c, so the actual problem will probably
>> be elsewhere. #20429 is booting and working fine for me (at least it
>> doesn't give this bug). changesets #20430 up until tip not, i can
>> trigger this bug every time by compiling xen (make xen), this makes
>> it panic and reboot.
>>
>> --
>> Sander
>>
>>
>>
>> Friday, November 20, 2009, 12:03:59 PM, you wrote:
>>
>>> Hi All,
>>
>>> When booting, the system spontaneus reboots some but not all the
>>> times Serial console output appended.
>>
>>> --
>>> Sander
>>
>>> System: intel Q9400, asus p5q-em do (intel Q45 chipset), 2GB ram
>>
>>
>>> __ __ _____ ____ _ _ _
>>> \ \/ /___ _ __ |___ / | ___| _ _ _ __ ___| |_ __ _| |__ |
>>> | ___ \ // _ \ '_ \ |_ \ |___ \ __| | | | '_ \/ __| __/ _` '_
>>> \| |/ _ \ / \ __/ | | | ___) | ___) |__| |_| | | | \__ \ ||
>>> (_| _) | | __/ /_/\_\___|_| |_| |____(_)____/ \__,_|_|
>>> _|___/\__\__,_|_.__/|_|\___|
>>>
>>> (XEN) Xen version 3.5-unstable (root@) (gcc version 4.3.2 (Debian
>>> 4.3.2-1.1) ) T hu Nov 19 08:37:49 CET 2009
>>> (XEN) Latest ChangeSet: Sat Nov 14 10:32:59 2009 +0000
>>> 20453:bec27eb6f72c (XEN) Command line: loglvl=all loglvl_guest=all
>>> dom0_mem=512M com1=115200,8n1 co nsole=com1
>>> (XEN) Video information:
>>> (XEN) VGA is text mode 80x25, font 8x16
>>> (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
>>> (XEN) EDID info not retrieved because of reasons unknown (XEN)
>>> Disc information: (XEN) Found 1 MBR signatures
>>> (XEN) Found 1 EDD information structures
>>> (XEN) Xen-e820 RAM map:
>>> (XEN) 0000000000000000 - 000000000009fc00 (usable)
>>> (XEN) 000000000009fc00 - 00000000000a0000 (reserved)
>>> (XEN) 00000000000e4000 - 0000000000100000 (reserved)
>>> (XEN) 0000000000100000 - 000000007ee70000 (usable)
>>> (XEN) 000000007ee70000 - 000000007ee7e000 (ACPI data)
>>> (XEN) 000000007ee7e000 - 000000007eed0000 (ACPI NVS)
>>> (XEN) 000000007eed0000 - 000000007ef00000 (reserved)
>>> (XEN) 00000000fed00000 - 00000000fed01100 (reserved)
>>> (XEN) 00000000fed02000 - 00000000fed14c00 (reserved)
>>> (XEN) 00000000fed20000 - 00000000fed40000 (reserved)
>>> (XEN) 00000000fee00000 - 00000000fee01000 (reserved)
>>> (XEN) 00000000ffe00000 - 0000000100000000 (reserved)
>>> (XEN) System RAM: 2000MB (2048816kB)
>>> (XEN) ACPI: RSDP 000FB080, 0024 (r2 ACPIAM)
>>> (XEN) ACPI: XSDT 7EE70100, 0064 (r1 A_M_I_ OEMXSDT 5000927 MSFT
>>> 97) (XEN) ACPI: FACP 7EE70290, 00F4 (r3 A_M_I_ OEMFACP 5000927 MSFT
>>> 97) (XEN) ACPI: DSDT 7EE70440, 841F (r1 A1065 A1065000 0 INTL
>>> 20060113) (XEN) ACPI: FACS 7EE7E000, 0040
>>> (XEN) ACPI: APIC 7EE70390, 006C (r1 A_M_I_ OEMAPIC 5000927 MSFT
>>> 97) (XEN) ACPI: MCFG 7EE70400, 003C (r1 A_M_I_ OEMMCFG 5000927 MSFT
>>> 97) (XEN) ACPI: OEMB 7EE7E040, 0089 (r1 A_M_I_ AMI_OEM 5000927 MSFT
>>> 97) (XEN) ACPI: HPET 7EE78860, 0038 (r1 A_M_I_ OEMHPET 5000927 MSFT
>>> 97) (XEN) ACPI: GSCI 7EE7E0D0, 2024 (r1 A_M_I_ GMCHSCI 5000927 MSFT
>>> 97) (XEN) ACPI: DMAR 7EE80100, 0070 (r1 AMI OEMDMAR 1 MSFT
>>> 97) (XEN) ACPI: SSDT 7EE810E0, 0A7C (r1 DpgPmm CpuPm 12 INTL
>>> 20060113) (XEN) NUMA turned off (XEN) Faking a node at
>>> 0000000000000000-000000007ee70000 (XEN) Domain heap initialised
>>> (XEN) found SMP MP-table at 000ff780 (XEN) DMI present.
>>> (XEN) Using APIC driver default
>>> (XEN) ACPI: PM-Timer IO Port: 0x808
>>> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
>>> (XEN) ACPI: wakeup_vec[7ee7e00c], vec_size[20]
>>> (XEN) ACPI: Local APIC address 0xfee00000
>>> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>>> (XEN) Processor #0 7:7 APIC version 20
>>> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>>> (XEN) Processor #1 7:7 APIC version 20
>>> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>>> (XEN) Processor #2 7:7 APIC version 20
>>> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>>> (XEN) Processor #3 7:7 APIC version 20
>>> (XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>>> (XEN) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
>>> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>>> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>>> (XEN) ACPI: IRQ0 used by override.
>>> (XEN) ACPI: IRQ2 used by override.
>>> (XEN) ACPI: IRQ9 used by override.
>>> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
>>> (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
>>> (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
>>> 255 (XEN) PCI: Not using MMCONFIG.
>>> (XEN) Using ACPI (MADT) for SMP configuration information
>>> (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN)
>>> Initializing CPU#0 (XEN) Detected 2666.415 MHz processor.
>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>> (XEN) CPU: L2 cache: 3072K
>>> (XEN) CPU: Physical Processor ID: 0
>>> (XEN) CPU: Processor Core ID: 0
>>> (XEN) VMX: Supported advanced features:
>>> (XEN) - APIC MMIO access virtualisation
>>> (XEN) - APIC TPR shadow
>>> (XEN) - Virtual NMI
>>> (XEN) - MSR direct-access bitmap
>>> (XEN) HVM: VMX enabled
>>> (XEN) xsave_init: cpu0: cntxt_max_size: 0x240 and states:
>>> 00000000:00000003 (XEN) xsave_init: using cntxt_size: 0x240 and
>>> states: 00000000:00000003 (XEN) Intel machine check reporting
>>> enabled on CPU#0. (XEN) CPU0: Thermal monitoring enabled (TM2)
>>> (XEN) CMCI: CPU0 has no CMCI support
>>> (XEN) I/O virtualisation disabled
>>> (XEN) CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz
>>> stepping 0a (XEN) Booting processor 1/1 eip 8c000
>>> (XEN) Initializing CPU#1
>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>> (XEN) CPU: L2 cache: 3072K
>>> (XEN) CPU: Physical Processor ID: 0
>>> (XEN) CPU: Processor Core ID: 1
>>> (XEN) xsave_init: cpu1: cntxt_max_size: 0x240 and states:
>>> 00000000:00000003 (XEN) Intel machine check reporting enabled on
>>> CPU#1. (XEN) CPU1: Thermal monitoring enabled (TM2)
>>> (XEN) CMCI: CPU1 has no CMCI support
>>> (XEN) CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz
>>> stepping 0a (XEN) Booting processor 2/2 eip 8c000
>>> (XEN) Initializing CPU#2
>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>> (XEN) CPU: L2 cache: 3072K
>>> (XEN) CPU: Physical Processor ID: 0
>>> (XEN) CPU: Processor Core ID: 2
>>> (XEN) xsave_init: cpu2: cntxt_max_size:0x240 and states:
>>> 00000000:00000003 (XEN) Intel machine check reporting enabled on
>>> CPU#2. (XEN) CPU2: Thermal monitoring enabled (TM2)
>>> (XEN) CMCI: CPU2 has no CMCI support
>>> (XEN) CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz
>>> stepping 0a (XEN) Booting processor 3/3 eip 8c000
>>> (XEN) Initializing CPU#3
>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>> (XEN) CPU: L2 cache: 3072K
>>> (XEN) CPU: Physical Processor ID: 0
>>> (XEN) CPU: Processor Core ID: 3
>>> (XEN) xsave_init: cpu3: cntxt_max_size: 0x240 and states:
>>> 00000000:00000003 (XEN) Intel machine check reporting enabled on
>>> CPU#3. (XEN) CPU3: Thermal monitoring enabled (TM2)
>>> (XEN) CMCI: CPU3 has no CMCI support
>>> (XEN) CPU3: Intl(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping
>>> 0a (XEN) Total of 4 processors activated.
>>> (XEN) ENABLING IO-APIC IRQs
>> (XEN) ->> Using new ACK method
>>> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
>>> (XEN) checking TSC synchronization across 4 CPUs: passed.
>>> (XEN) Platform timer is 14.318MHz HPET
>>> (XEN) microcode.c:73:d32767 microcode: CPU1 resumed
>>> (XEN) microcode.c:73:d32767 microcode: CPU2 resumed (XEN) Brought
>>> up 4 CPUs (XEN) microcode.c:73:d32767 microcode: CPU3 resumed
>>> (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast
>>> (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling
>>> timer started. (XEN) *** LOADING DOMAIN 0 ***
>>> (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x821000
>>> (XEN) elf_parse_binary: phdr: paddr=0x1821000 memsz=0xe57f8
>>> (XEN) elf_parse_binary: phdr: paddr=0x1907000 memsz=0x888
>>> (XEN) elf_parse_binary: phdr: paddr=0x1908000 memsz=0x15860
>>> (XEN) elf_parse_binary: phdr: paddr=0x191d860 memsz=0x1a57a0
>>> (XEN) elf_parse_binary: memory: 0x1000000 -> 0x1ac3000
>>> (XEN) elf_xen_parse_note: GUEST_OS = "linux"
>>> (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
>>> (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
>>> (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
>>> (XEN) elf_xen_parse_note: ENTRY = 0xffffffff8191da60
>>> (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
>>> (XEN) elf_xen_parse_note: FEATURES =
>>> "!writable_page_tables|pae_pgdir_above_4gb"
>>> (XEN) elf_xen_parse_note: PAE_MODE = "yes"
>>> (XEN) elf_xen_parse_note: LOADER = "generic"
>>> (XEN) elf_xen_parse_note: unknown xen elf note (0xd)
>>> (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
>>> (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
>>> (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
>>> (XEN) elf_xen_addr_calc_check: addresses:
>>> (XEN) virt_base = 0xffffffff80000000
>>> (XEN) elf_paddr_offset = 0x0
>>> (XEN) virt_offset = 0xffffffff80000000
>>> (XEN) virt_kstart = 0xffffffff81000000
>>> (XEN) virt_kend = 0xffffffff81ac3000
>>> (XEN) virt_entry = 0xffffffff8191da60
>>> (XEN) p2m_base = 0xffffffffffffffff
>>> (XEN) Xen kernel: 64-bit, lsb, compat32
>>> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1ac3000
>>> (XEN) PHYSICAL MEMORY ARRANGEMENT:
>>> (XEN) Dom0 alloc.: 0000000074000000->0000000078000000 (114688
>>> pages to be all ocated)
>>> (XEN) VIRTUAL MEMORY ARRANGEMENT:
>>> (XEN) Loaded kernel: ffffffff81000000->ffffffff81ac3000
>>> (XEN) Init. ramdisk: ffffffff81ac3000->ffffffff82172a00
>>> (XEN) Phys-Mach map: ffffffff82173000->ffffffff82273000
>>> (XEN) Start info: ffffffff82273000->ffffffff822734b4
>>> (XEN) Page tables: ffffffff82274000->ffffffff82289000
>>> (XEN) Boot stack: ffffffff82289000->ffffffff8228a000
>>> (XEN) TOTAL: ffffffff80000000->ffffffff82400000
>>> (XEN) ENTRY ADDRESS: ffffffff8191da60
>>> (XEN) Dom0 has maximum 4 VCPUs
>>> (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 ->
>>> 0xffffffff81821000 (XEN) elf_load_binary: phdr 1 at
>>> 0xffffffff81821000 -> 0xffffffff819067f8 (XEN) elf_load_binary:
>>> phdr 2 at 0xffffffff81907000 -> 0xffffffff81907888 (XEN)
>>> elf_load_binary: phdr 3 at 0xffffffff81908000 -> 0xffffffff8191d860
>>> (XEN) elf_load_binary: phdr 4 at 0xffffffff8191d860 ->
>>> 0xffffffff81998000 (XEN) Scrubbing Free RAM: ..............done.
>>> (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All
>>> (XEN) Guest Loglevel: All
>>> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
>>> input to Xen )
>>> (XEN) Freed 156kB init memory.
>>> mapping kernel into physical memory
>>> Xen: setup ISA identity maps
>>> about to get started...
>>> (XEN) io_apic.c:2251:
>>> (XEN) ioapic_guest_write: apic=0, pin=0, irq=0
>>> (XEN) ioapic_guest_write: new_entry=00010900
>>> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use
>>> IRQ! (XEN) io_apic.c:2251: (XEN) ioapic_guest_write: apic=0, pin=2,
>>> irq=0 (XEN) ioapic_guest_write: new_entry=00010900
>>> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use
>>> IRQ! (XEN) irq.c:1444: dom0: pirq 0 or irq 3 already mapped (XEN)
>>> io_apic.c:2251: (XEN) ioapic_guest_write: apic=0, pin=4, irq=4
>>> (XEN) ioapic_guest_write: new_entry=00010900
>>> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use
>>> IRQ! (XEN) irq.c:1444: dom0: pirq 0 or irq 5 already mapped
>>> (XEN) irq.c:1444: dom0: pirq 0 or irq 6 already mapped
>>> (XEN) irq.c:1444: dom0: pirq 0 or irq 7 already mapped
>>> (XEN) irq.c:1444: dom0: pirq 0 or irq 8 already mapped
>>> (XEN) irq.c:1444: dom0: pirq 0 or irq 9 already mapped
>>> (XEN) irq.c:1444: dom0: pirq 0 or irq 10 already mapped
>>> (XEN) irq.c:1444: dom0: pirq 0 or irq 11 already mapped
>>> (XEN) irq.c:1444: dom0: pirq 0 or irq 12 already mapped
>>> (XEN) irq.c:1444: dom0: pirq 0 or irq 13 already mapped
>>> (XEN) irq.c:1444: dom0: pirq 0 or irq 14 already mapped
>>> (XEN) irq.c:1444: dom0: pirq 0 or irq 15 already mapped
>>> (XEN) allocated vector for irq:16
>>> (XEN) irq.c:1444: dom0: pirq 0 or irq 16 already mapped
>>> (XEN) allocated vector for irq:17
>>> (XEN) irq.c:1444: dom0: pirq 0 or irq 17 already mapped
>>> (XEN) allocated vector for irq:18
>>> (XEN) irq.c:1444: dom0: pirq 0 or irq 18 already mapped
>>> (XEN) allocated vector for irq:19
>>> (XEN) irq.c:1444: dom0: pirq 0 or irq 19 already mapped
>>> (XEN) allocated vector for irq:20
>>> (XEN) irq.c:1444: dom0: pirq 0 or irq 20 already mapped
>>> (XEN) allocated vector for irq:22
>>> (XEN) irq.c:1444: dom0: pirq 0 or irq 22 already mapped
>>> (XEN) allocated vector for irq:23
>>> (XEN) irq.c:1444: dom0: pirq 0 or irq 23 already mapped (XEN)
>>> io_apic.c:2251: (XEN) ioapic_guest_write: apic=0, pin=0, irq=0
>>> (XEN) ioapic_guest_write: new_entry=00000900
>>> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use
>>> IRQ! (XEN) io_apic.c:2251: (XEN) ioapic_guest_write: apic=0, pin=4,
>>> irq=4 (XEN) ioapic_guest_write: new_entry=00000904
>>> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use
>>> IRQ! (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:01.0
>>> (XEN) PCI add device 00:03.0
>>> (XEN) PCI add device 00:19.0
>>> (XEN) PCI add device 00:1e.0
>>> (XEN) PCI add device 00:1f.0
>>> (XEN) PCI add device 00:1f.2
>>> (XEN) PCI add device 00:1f.3
>>> (XEN) PCI add device 00:1f.5
>>> (XEN) PCI add device 01:00.0
>>> (XEN) PCI add device 01:00.1
>>> (XEN) io_apic.c:2251:
>>> (XEN) ioapic_guest_write: apic=0, pin=4, irq=4
>>> (XEN) ioapic_guest_write: new_entry=00000904
>>> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use
>>> IRQ! (XEN) Set CPU acpi_id(1) cpuid(0) Px State info:
>>> (XEN) _PPC: 0
>>> (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=22220]
>>> (XEN) Monitor-Mwait will be used to enter C-1 state
>>> (XEN) Set CPU acpi_id(1) cpuid(0) Px State info:
>>> (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0,
>>> bit_offset=0 , reserved=0, address=0
>>> (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0,
>>> bit_offset=0 , reserved=0, address=0
>>> (XEN) _PSS: state_count=3
>>> (XEN) State0: 2670MHz 89000mW 10us 10us 0x81f 0x81f
>>> (XEN) State1: 2336MHz 76000mW 10us 10us 0x71b 0x71b
>>> (XEN) State2: 2003MHz 63000mW 10us 10us 0x616 0x616
>>> (XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254
>>> num_processors=4 (XEN) _PPC: 0 (XEN) xen_pminfo:
>>> @acpi_cpufreq_cpu_init,HARDWARE addr space (XEN) CPU 0
>>> initialization completed (XEN) Set CPU acpi_id(2) cpuid(1) Px State
>>> info: (XEN) _PPC: 0
>>> (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=22220]
>>> (XEN) Monitor-Mwait will be used to enter C-1 state
>>> (XEN) Set CPU acpi_id(2) cpuid(1) Px State info:
>>> (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0,
>>> bit_offset=0 , reserved=0, address=0
>>> (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0,
>>> bit_offset=0 , reserved=0, address=0
>>> (XEN) _PSS: state_count=3
>>> (XEN) State0: 2670MHz 89000mW 10us 10us 0x81f 0x81f
>>> (XEN) State1: 2336MHz 76000mW 10us 10us 0x71b 0x71b
>>> (XEN) State2: 2003MHz 63000mW 10us 10us 0x616 0x616
>>> (XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254
>>> num_processors=4 (XEN) _PPC: 0 (XEN) xen_pminfo:
>>> @acpi_cpufreq_cpu_init,HARDWARE addr space (XEN) CPU 1
>>> initialization completed (XEN) Set CPU acpi_id(3) cpuid(2) Px State
>>> info: (XEN) _PPC: 0
>>> (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=22220]
>>> (XEN) Monitor-Mwait will be used to enter C-1 state
>>> (XEN) Set CPU acpi_id(3) cpuid(2) Px State info:
>>> (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0,
>>> bit_offset=0 , reserved=0, address=0
>>> (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0,
>>> bit_offset=0 , reserved=0, address=0
>>> (XEN) _PSS: state_count=3
>>> (XEN) State0: 2670MHz 89000mW 10us 10us 0x81f 0x81f
>>> (XEN) State1: 2336MHz 76000mW 10us 10us 0x71b 0x71b
>>> (XEN) State2: 2003MHz 63000mW 10us 10us 0x616 0x616
>>> (XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254
>>> num_processors=4 (XEN) _PPC: 0 (XEN) xen_pminfo:
>>> @acpi_cpufreq_cpu_init,HARDWARE addr space (XEN) CPU 2
>>> initialization completed (XEN) Set CPU acpi_id(4) cpuid(3) Px State
>>> info: (XEN) _PPC: 0
>>> (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=22220]
>>> (XEN) Monitor-Mwait will be used to enter C-1 state
>>> (XEN) Set CPU acpi_id(4) cpuid(3) Px State info:
>>> (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0,
>>> bit_offset=0 , reserved=0, address=0
>>> (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0,
>>> bit_offset=0 , reserved=0, address=0
>>> (XEN) _PSS: state_count=3
>>> (XEN) State0: 2670MHz 89000mW 10us 10us 0x81f 0x81f
>>> (XEN) State1: 2336MHz 76000mW 10us 10us 0x71b 0x71b
>>> (XEN) State2: 2003MHz 63000mW 10us 10us 0x616 0x616
>>> (XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254
>>> num_processors=4 (XEN) _PPC: 0 (XEN) xen_pminfo:
>>> @acpi_cpufreq_cpu_init,HARDWARE addr space (XEN) CPU 3
>>> initialization completed (XEN) Xen BUG at hpet.c:663
>>> (XEN) ----[ Xen-3.5-unstable x86_64 debug=y Not tainted ]----
>>> (XEN) CPU: 3 (XEN) RIP: e008:[<ffff82c480189b81>]
>>> hpet_broadcast_exit+0x4b/0xf2 (XEN) RFLAGS: 0000000000010246
>>> CONTEXT: hypervisor (XEN) rax: ffff82c48025fa88 rbx:
>>> 0000000000000000 rcx: 0000000000000010 (XEN) rdx:
>>> 0000000000006000 rsi: 000000054583d5f5 rdi: ffff82c4802306b0
>>> (XEN) rbp: ffff83007ea37e30 rsp: ffff83007ea37e10 r8:
>>> 0000000000000004 (XEN) r9: ffff83007ea68e68 r10:
>>> ffff83007ea68e68 r11: 0f0f0f0f0f0f0f0f (XEN) r12:
>>> 0000000000000003 r13: 0000000000006000 r14: ffff830076401830
>>> (XEN) r15: 0000000000916ce8 cr0: 000000008005003b cr4:
>>> 00000000000026f0 (XEN) cr3: 000000007ecec000 cr2:
>>> 000000000046e320 (XEN) ds: 002b es: 002b fs: 0000 gs: 0000
>>> ss: e010 cs: e008 (XEN) Xen stack trace from rsp=ffff83007ea37e10:
>>> (XEN) 0000000000000002 ffff82c4802362a0 ffff8300764018c0
>>> ffff830076401830 (XEN) ffff83007ea37ee0 ffff82c48018bbf1
>>> ffff83007ea37ea0 ffff82c48011fd9e (XEN) ffff82c480265080
>>> 00916ce37ea37ed8 ffff82c48011cb6f ffff82c480265100 (XEN)
>>> ffff83007ea2e380 0000000000000003 ffff82c4802362a0 000000007ea37f28
>>> (XEN) 0000000000000000 0000000000000000 ffff83007ea37ee0
>>> fffff83000000046 (XEN) 0000000000000003 ffff83007ea37f28
>>> ffff82c4802362a0 ffff83007ea37f28 (XEN) ffff82c48025fa00
>>> ffff82c480236918 ffff83007ea37f20 ffff82c48014ca00 (XEN)
>>> ffff83007cefa000 ffff83007ea3e000 0000000000000003 ffff83007cefa000
>>> (XEN) 00000002314e8a32 ffff82c480265080 ffff83007ea37dc8
>>> 0000000000000000 (XEN) 0000000000000000 0000000000000000
>>> 0000000000000000 ffff88001f89bf10 (XEN) ffffffff818fe0a8
>>> 0000000000000246 000000000000000c ffff88001f89be30 (XEN)
>>> 0000000000000000 0000000000000000 ffffffff810093aa 0000000000000000
>>> (XEN) 00000000deadbeef 00000000deadbeef 0000010000000000
>>> ffffffff810093aa (XEN) 000000000000e033 0000000000000246
>>> ffff88001f89bef8 000000000000e02b (XEN) 5555555555555555
>>> 5555555555555555 5555555555555555 5555555555555555 (XEN)
>>> 5555555500000003 ffff83007ea3e000 (XEN) Xen call trace: (XEN)
>>> [<ffff82c480189b81>] hpet_broadcast_exit+0x4b/0xf2 (XEN)
>>> [<ffff82c48018bbf1>] acpi_processor_idle+0x5f6/0x6b5 (XEN)
>>> [<ffff82c48014ca00>] idle_loop+0x89/0x93 (XEN) (XEN) (XEN)
>>> **************************************** (XEN) Panic on CPU 3:
>>> (XEN) Xen BUG at hpet.c:663 (XEN)
>>> **************************************** (XEN) (XEN) Reboot in five
>>> seconds...
>>
>>
>>
>>
>>
>>> host : xentest
>>> release : 2.6.31.6
>>> version : #1 SMP Fri Nov 20 02:18:08 CET 2009
>>> machine : x86_64
>>> nr_cpus : 4
>>> nr_nodes : 1
>>> cores_per_socket : 4
>>> threads_per_core : 1
>>> cpu_mhz : 2666
>>> hw_caps :
>>>
> bfebfbff:20100800:00000000:00000940:0408e3fd:00000000:00000001:00000000
>>> virt_caps : hvm
>>> total_memory : 2000
>>> free_memory : 1496
>>> node_to_cpu : node0:0-3
>>> node_to_memory : node0:1496
>>> node_to_dma32_mem : node0:1496
>>> xen_major : 3
>>> xen_minor : 5
>>> xen_extra : -unstable
>>> xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p
>>> hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64
>>> xen_scheduler : credit
>>> xen_pagesize : 4096
>>> platform_params : virt_start=0xffff800000000000
>>> xen_changeset : Sat Nov 14 10:32:59 2009 +0000
>>> 20453:bec27eb6f72c xen_commandline : loglvl=all
>>> loglvl_guest=all dom0_mem=512M com1=115200,8n1 console=com1
>>> cc_compiler : gcc version 4.3.2 (Debian 4.3.2-1.1)
>>> cc_compile_by : root cc_compile_domain :
>>> cc_compile_date : Thu Nov 19 08:37:49 CET 2009
>>> xend_config_format : 4
>>
>>
>>
>>
>>
>>
>>
>> --
>> Best regards,
>> Sander mailto:linux@xxxxxxxxxxxxxx
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home