|
xen-devel
RE: [Xen-devel] Virt-manager issue resolved
you mean "#xend start" and "#./xendomains start" doesn't work in /etc/init.d?
At first place dom0 must be listed in #xm list as a running domain
Regards,
Fasiha Ashraf
--- On Fri, 6/11/09, Caz Yokoyama <cazyokoyama@xxxxxxxxx> wrote:
From: Caz Yokoyama <cazyokoyama@xxxxxxxxx>
Subject: RE: [Xen-devel] Virt-manager issue resolved
To: "'Fasiha Ashraf'" <feehapk@xxxxxxxxxxx>, "'xen'" <xen-devel@xxxxxxxxxxxxxxxxxxx>
Cc: "'Fedora Xen'" <fedora-xen@xxxxxxxxxx>, virt-tools-list@xxxxxxxxxx
Date: Friday, 6 November, 2009, 5:03 PM
Hello Fasiha,
[root@tragi caz]#
iptables -F
[root@tragi caz]#
iptables -L
Chain INPUT (policy
ACCEPT)
target
prot opt
source
destination
Chain FORWARD
(policy ACCEPT)
target
prot opt
source
destination
Chain OUTPUT
(policy ACCEPT)
target
prot opt
source
destination
[root@tragi caz]#
sh -x /etc/init.d/xend start
+ .
/etc/rc.d/init.d/functions
++
TEXTDOMAIN=initscripts
++ umask 022
++
PATH=/sbin:/usr/sbin:/bin:/usr/bin
++ export PATH
++ '[' -z '' ']'
++ COLUMNS=80
++ '[' -z '' ']'
+++
/sbin/consoletype
++ CONSOLETYPE=pty
++ '[' -f
/etc/sysconfig/i18n -a -z '' -a -z '' ']'
++ .
/etc/profile.d/lang.sh
+++ sourced=0
+++ '[' -n
en_US.UTF-8 ']'
+++
saved_lang=en_US.UTF-8
+++ '[' -f
/root/.i18n ']'
+++
LANG=en_US.UTF-8
+++ unset
saved_lang
+++ '[' 0 = 1 ']'
+++ unset sourced
+++ unset langfile
++ unset
LANGSH_SOURCED
++ '[' -z '' ']'
++ '[' -f
/etc/sysconfig/init ']'
++ .
/etc/sysconfig/init
+++ BOOTUP=color
+++ RES_COL=60
+++
MOVE_TO_COL='echo -en \033[60G'
+++
SETCOLOR_SUCCESS='echo -en \033[0;32m'
+++
SETCOLOR_FAILURE='echo -en \033[0;31m'
+++
SETCOLOR_WARNING='echo -en \033[0;33m'
+++
SETCOLOR_NORMAL='echo -en \033[0;39m'
+++ LOGLEVEL=3
+++ PROMPT=yes
+++ AUTOSWAP=no
++ '[' pty = serial
']'
++ __sed_discard_ignored_files='/\(~\|\.bak\|\.orig\|\.rpmnew\|\.rpmorig\|\.rpmsave\)$/d'
+ '[' '!' -d
/proc/xen ']'
+ grep -q control_d
/proc/xen/capabilities
+ RETVAL=0
+ case
"$1" in
+ start
+ echo -n 'Starting
xend daemon: '
Starting xend
daemon: + /usr/sbin/xend
+ RETVAL=1
+ test 1 = 0
+ echo_failure
+ '[' color = color
']'
+ echo -en
'\033[60G'
+ echo -n '['
[+ '[' color =
color ']'
+ echo -en
'\033[0;31m'
+ echo -n FAILED
FAILED+ '[' color =
color ']'
+ echo -en
'\033[0;39m'
+ echo -n ']'
]+ echo -ne '\r'
+ return 1
+ echo
+ '[' 1 -eq 0 ']'
+ exit 1
[root@tragi caz]#
sh -x /etc/init.d/xendomains start
+ '[' -e
/proc/xen/privcmd ']'
+
LOCKFILE=/var/lock/subsys/xendomains
+
XENDOM_CONFIG=/etc/sysconfig/xendomains
+ test -r
/etc/sysconfig/xendomains
+ .
/etc/sysconfig/xendomains
++
XENDOMAINS_SYSRQ=
++
XENDOMAINS_USLEEP=100000
++
XENDOMAINS_CREATE_USLEEP=5000000
++
XENDOMAINS_MIGRATE=
++
XENDOMAINS_SAVE=/var/lib/xen/save
++
XENDOMAINS_SHUTDOWN='--halt --wait'
++
XENDOMAINS_SHUTDOWN_ALL='--all --halt --wait'
++
XENDOMAINS_RESTORE=true
++
XENDOMAINS_AUTO=/etc/xen/auto
++
XENDOMAINS_AUTO_ONLY=false
++
XENDOMAINS_STOP_MAXWAIT=300
/etc/init.d/xendomains:
line 125: syntax error near unexpected token `<'
/etc/init.d/xendomains:
line 125: ` if test -z "$RUNLEVEL"; then read
RUNLEVEL REST < <(/sbin/runlevel); fi'
[root@tragi caz]#
xm info
Error: Unable to
connect to xend: No such file or directory. Is xend running?
The line which produces
syntax error above does not produces an error when it is invoked manually. What
xendomains do you have?
-caz
From: Fasiha Ashraf
[mailto:feehapk@xxxxxxxxxxx]
Sent: Thursday, November 05, 2009
10:42 PM
To: 'xen'; Caz Yokoyama
Cc: 'Fedora Xen';
virt-tools-list@xxxxxxxxxx
Subject: RE: [Xen-devel]
Virt-manager issue resolved
|
Try starting xend and xendomains after
flushing iptable rules. #iptables -F
run
#iptables -F
then
#xend start
and then inside /etc/init.d
#./xendomains start
now to check whether xend is running or not. Use #xm info or #xm list
Regards,
Fasiha Ashraf
--- On Thu, 5/11/09, Caz Yokoyama <cazyokoyama@xxxxxxxxx>
wrote:
From: Caz Yokoyama <cazyokoyama@xxxxxxxxx>
Subject: RE: [Xen-devel] Virt-manager issue resolved
To: "'Fasiha Ashraf'" <feehapk@xxxxxxxxxxx>,
"'xen'" <xen-devel@xxxxxxxxxxxxxxxxxxx>
Cc: "'Fedora Xen'" <fedora-xen@xxxxxxxxxx>,
virt-tools-list@xxxxxxxxxx
Date: Thursday, 5 November, 2009, 5:21 PM
Hello Fasiha,
[root@tragi caz]#
iptables -L
Chain INPUT
(policy ACCEPT)
target
prot opt
source
destination
ACCEPT
udp --
anywhere
anywhere
udp dpt:domain
ACCEPT
tcp --
anywhere
anywhere
tcp dpt:domain
ACCEPT
udp --
anywhere
anywhere
udp dpt:bootps
ACCEPT
tcp --
anywhere
anywhere
tcp dpt:bootps
ACCEPT
all --
anywhere
anywhere
state RELATED,ESTABLISHED
ACCEPT
icmp --
anywhere
anywhere
ACCEPT
all --
anywhere
anywhere
ACCEPT
tcp --
anywhere
anywhere
state NEW tcp dpt:ssh
REJECT
all --
anywhere
anywhere
reject-with icmp-host-prohibited
Chain FORWARD
(policy ACCEPT)
target
prot opt
source
destination
ACCEPT
all --
anywhere
192.168.122.0/24 state RELATED,ESTABLISHED
ACCEPT
all -- 192.168.122.0/24
anywhere
ACCEPT
all --
anywhere
anywhere
REJECT
all -- anywhere
anywhere
reject-with icmp-port-unreachable
REJECT
all --
anywhere
anywhere
reject-with icmp-port-unreachable
REJECT
all --
anywhere
anywhere
reject-with icmp-host-prohibited
Chain OUTPUT
(policy ACCEPT)
target
prot opt
source
destination
Thank you.
-caz
From:
Fasiha Ashraf [mailto:feehapk@xxxxxxxxxxx]
Sent: Thursday, November 05,
2009 1:07 AM
To: 'xen'; Caz Yokoyama
Cc: virt-tools-list@xxxxxxxxxx;
'Fedora Xen'
Subject: RE: [Xen-devel]
Virt-manager issue resolved
|
Please send the output of #iptables -L
Regards,
Fasiha Ashraf
--- On Thu, 5/11/09, Caz Yokoyama <cazyokoyama@xxxxxxxxx>
wrote:
From: Caz Yokoyama <cazyokoyama@xxxxxxxxx>
Subject: RE: [Xen-devel] Virt-manager issue resolved
To: "'Fasiha Ashraf'" <feehapk@xxxxxxxxxxx>,
"'xen'" <xen-devel@xxxxxxxxxxxxxxxxxxx>
Cc: virt-tools-list@xxxxxxxxxx, "'Fedora Xen'"
<fedora-xen@xxxxxxxxxx>
Date: Thursday, 5 November, 2009, 11:03 AM
Hello Fasiha,
Thank you for summarizing the procedure. I don’t
have xend running. Here is the procedure I did.
Install Fedora
11 x86_64, full update.
su
yum install
transfig texi2html libaio-devel dev86 glibc-devel.i586
yum install
PyXML bridge-utils qemu-img qemu-common
wget
http://kojipkgs.fedoraproject.org/packages/xen/3.4.1/5.fc12/src/xen-3.4.1-5.fc12.src.rpm
rpm -ivh
xen-3.4.1-5.fc12.src.rpm
cd
cd
rpmbuild/SPECS/
rpmbuild -bb
xen.spec
cd
~/rpmbuild/RPMS/x86_64
rpm -ivh *.rpm
cat >
/etc/yum.repos.d/fedora-virt-preview.repo << EOF
[virt-preview]
name=Virtualization
Rawhide for Fedora 11
baseurl=http://markmc.fedorapeople.org/virt-preview/f11/\$basearch/
enabled=1
gpgcheck=0
EOF
yum install
libvirt libvirt-python python-virtinst virt-manager virt-viewer
rpm -qa | grep
virt
cd virt-manager
git clone
git://git.kernel.org/pub/scm/linux/kernel/git/Jeremy/xen.git JeremyDom0
make menuconfig
make all
su
make
modules_install install
reboot with xen
> Does "virsh list" work
# virsh list
error: Unable to connect to
‘localhost:8000’: Connection refused
error: failed to connect to the
hypervisor
“/etc/init.d/xend start”
failed because /usr/sbin/xend returns 1.
Suggestion? I have attached .config.
-caz
From: Fasiha Ashraf [mailto:feehapk@xxxxxxxxxxx]
Sent: Thursday, October 29,
2009 10:31 PM
To: 'xen'; Caz Yokoyama
Cc:
virt-tools-list@xxxxxxxxxx; 'Fedora Xen'
Subject: RE: [Xen-devel]
Virt-manager issue resolved
|
Latest virt-manager doesn't
work with the previous version of libvirt on fc11. You need to build xen
and latest libvirt form rpm. Follow the steps below.
Install
packages required by rpmbuild:-
# yum install transfig texi2html libaio-devel dev86
glibc-devel.i586
Download xen-3.4.1-1.fc12.src.rpm
# wget
http://kojipkgs.fedoraproject.org/packages/xen/3.4.1/1.fc12/src/xen-3.4.1-1.fc12.src.rpm
# rpm -iv xen-3.4.1-1.fc12.src.rpm
# cd /root/rpmbuild/SPECS
# rpmbuild -ba ./xen.spec
To install hypervisor and tools
# cd ../RPMS/x86_64
# yum install xen-3.4.1-1.fc11.x86_64.rpm \
xen-debuginfo-3.4.1-1.fc11.x86_64.rpm \
xen-devel-3.4.1-1.fc11.x86_64.rpm \
xen-doc-3.4.1-1.fc11.x86_64.rpm \
xen-hypervisor-3.4.1-1.fc11.x86_64.rpm \
xen-libs-3.4.1-1.fc11.x86_64.rpm \
xen-runtime-3.4.1-1.fc11.x86_64.rpm
To
install new libvirt-0.7.0-6
# cat > /etc/yum.repos.d/fedora-virt-preview.repo <<
EOF
[virt-preview]
name=Virtualization Rawhide for Fedora 11
baseurl=http://markmc.fedorapeople.org/virt-preview/f11/\$basearch/
enabled=1
gpgcheck=0
EOF
# yum install libvirt libvirt-python python-virtinst \
virt-manager virt-viewer
# rpm
-qa|grep virt
the following list must be there may
be with higher version numbers.
libvirt-client-0.7.0-6.fc11.x86_64
libvirt-python-0.7.0-6.fc11.x86_64
virt-viewer-0.2.0-1.fc11.x86_64
virt-manager-0.7.0-5.fc11.x86_64
libvirt-0.7.0-6.fc11.x86_64
python-virtinst-0.500.0-1.fc11.noarch
All the above steps should be done on the base kernel. Now compile and
build xen with paravirt kernel. Now boot into the new xen kernel after
starting xend run this
# xm info
to check. now you can use
virt-manager in your set-up
Regards,
Fasiha Ashraf
--- On Thu, 29/10/09, Caz Yokoyama <cazyokoyama@xxxxxxxxx>
wrote:
From: Caz Yokoyama <cazyokoyama@xxxxxxxxx>
Subject: RE: [Xen-devel] Virt-manager issue resolved
To: "'Fasiha Ashraf'" <feehapk@xxxxxxxxxxx>,
"'xen'" <xen-devel@xxxxxxxxxxxxxxxxxxx>
Cc: virt-tools-list@xxxxxxxxxx, "'Fedora Xen'"
<fedora-xen@xxxxxxxxxx>
Date: Thursday, 29 October, 2009, 6:19 PM
Could you summarize the procedure? I am
trying to run virt-manager on Fedora 11 with Xen-3.5-unstable and
Jeremy’s Dom0
(git://git.kernel.org/pub/scm/linux/kernel/git/Jeremy/xen.git). I am
wondering what option should be good on make on xen-3.5-unstable. I did
Make xen tools
Make install-xen install-tools
What else I need do?
Booting dom0 is fine.
-caz
From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Fasiha Ashraf
Sent: Tuesday, October 27,
2009 4:49 AM
To: Cole Robinson; xen
Cc: Fedora Xen;
virt-tools-list@xxxxxxxxxx
Subject: [Xen-devel]
Virt-manager issue resolved
|
I have got para-virt option enabled by
installing vm using through http. the problem was, i was trying to
install it from DVD. Now the issue is it doesn't find the file on the
givern location although i can access them from the same location in
browser. PFA, the screen shots for the problem.
Regards
Fasiha Ashraf
--- On Mon, 26/10/09, Cole Robinson <crobinso@xxxxxxxxxx>
wrote:
From: Cole Robinson <crobinso@xxxxxxxxxx>
Subject: Re: [virt-tools-list] Unable to complete install: 'Domain not
found: xenUnifiedDomainLookupByName
To: "Fasiha Ashraf" <feehapk@xxxxxxxxxxx>
Cc: virt-tools-list@xxxxxxxxxx, bderzhavets@xxxxxxxxx, "Xen users"
<james.harper@xxxxxxxxxxxxxxxx>, "Fedora Xen"
<fedora-xen@xxxxxxxxxx>
Date: Monday, 26 October, 2009, 7:08 PM
On 10/26/2009 09:24 AM, Fasiha Ashraf
wrote:
> It seem that its trying to install HVM guest that is not possible
using virt-manager.
> But you can see from the attached screen shot that virt type
option is disabled and i can't select paravirt from it. what should i
do?
> here's the log .virt-manager/virt-manager.log
>
Please include the other information I asked for:
virsh --connect xen:/// capabilities
virsh --connect xen:/// version
- Cole
> [Mon, 26 Oct 2009 16:11:51 virt-manager 3019] DEBUG
(DistroInstaller:119) DistroInstaller location is a local file/path:
/dev/sr0
> [Mon, 26 Oct 2009 16:12:01 virt-manager 3019] DEBUG
(DistroInstaller:119) DistroInstaller location is a local file/path:
/dev/sr0
> [Mon, 26 Oct 2009 16:12:01 virt-manager 3019] DEBUG (create:877)
Default storage path is: /var/lib/libvirt/images/f.img
> [Mon, 26 Oct 2009 16:12:01 virt-manager 3019] DEBUG
(VirtualDisk:737) Path '/var/lib/libvirt/images' is target for pool
'default'. Creating volume 'f.img'.
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG
(DistroInstaller:119) DistroInstaller location is a local file/path:
/dev/sr0
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (create:877)
Default storage path is: /var/lib/libvirt/images/f.img
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG
(VirtualDisk:737) Path '/var/lib/libvirt/images' is target for pool
'default'. Creating volume 'f.img'.
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (create:1516)
Creating a VM f
> Type: xen,hvm
> UUID: 01f35eb7-fe09-c231-bfe0-1e9bfc6ff5a3
> Install Source: /dev/sr0
> OS: linux:fedora11
> Kernel args: None
> Memory: 512
> Max Memory: 512
> # VCPUs: 1
> Filesize: 7.0
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (create:1565)
Starting background install process
> [Mon, 26 Oct 2009 16:12:18 virt-manager 3019] DEBUG (Storage:950)
Creating storage volume 'f.img' with xml:
> <volume>
> <name>f.img</name>
> <capacity>7516192768</capacity>
> <allocation>7516192768</allocation>
> <target>
> <format type='raw'/>
> </target>
> </volume>
> [Mon, 26 Oct 2009 16:13:08 virt-manager 3019] DEBUG (Storage:973)
Storage volume 'f.img' install complete.
> [Mon, 26 Oct 2009 16:13:10 virt-manager 3019] DEBUG (Guest:724)
Creating guest from:
> <domain type='xen'>
> <name>f</name>
> <currentMemory>524288</currentMemory>
> <memory>524288</memory>
> <uuid>01f35eb7-fe09-c231-bfe0-1e9bfc6ff5a3</uuid>
> <os>
> <type arch='x86_64'>hvm</type>
>
<loader>/usr/lib/xen/boot/hvmloader</loader>
> <boot dev='cdrom'/>
> </os>
> <features>
> <acpi/><apic/><pae/>
> </features>
> <clock offset="utc"/>
> <on_poweroff>destroy</on_poweroff>
> <on_reboot>destroy</on_reboot>
> <on_crash>destroy</on_crash>
> <vcpu>1</vcpu>
> <devices>
>
<emulator>/usr/lib64/xen/bin/qemu-dm</emulator>
> <disk type='file' device='disk'>
> <source
file='/var/lib/libvirt/images/f.img'/>
> <target dev='hda' bus='ide'/>
> </disk>
> <disk type='block' device='cdrom'>
> <source dev='/dev/sr0'/>
> <target dev='hdc' bus='ide'/>
> <readonly/>
> </disk>
> <interface type='bridge'>
> <source bridge='eth0'/>
> <mac
address='00:16:36:08:9e:36'/>
> </interface>
> <input type='tablet' bus='usb'/>
> <graphics type='vnc' port='-1'/>
> <console type='pty'/>
> <sound model='es1370'/>
> </devices>
> </domain>
>
> [Mon, 26 Oct 2009 16:13:10 virt-manager 3019] DEBUG
(netdevhelper:176) Adding net device vif3.0 fe:ff:ff:ff:ff:ff
/sys/class/net/vif3.0 (bridge: None)
> [Mon, 26 Oct 2009 16:13:12 virt-manager 3019] DEBUG (engine:187)
Tick is slow, not running at requested rate.
> [Mon, 26 Oct 2009 16:13:13 virt-manager 3019] DEBUG (engine:187)
Tick is slow, not running at requested rate.
> [Mon, 26 Oct 2009 16:13:14 virt-manager 3019] DEBUG (engine:187)
Tick is slow, not running at requested rate.
> [Mon, 26 Oct 2009 16:13:15 virt-manager 3019] DEBUG (engine:187)
Tick is slow, not running at requested rate.
> [Mon, 26 Oct 2009 16:14:46 virt-manager 3019] DEBUG
(netdevhelper:138) Removing physical net device vif3.0 from list.
> [Mon, 26 Oct 2009 16:14:46 virt-manager 3019] DEBUG
(opticalhelper:205) Optical device removed:
/org/freedesktop/Hal/devices/net_fe_ff_ff_ff_ff_ff
> [Mon, 26 Oct 2009 16:14:46 virt-manager 3019] DEBUG (error:76)
Uncaught Error: Unable to complete install: 'POST operation failed:
xend_post: error from xen $
> Traceback (most recent call last):
> File
"/usr/share/virt-manager/virtManager/create.py", line 1575,
in do_install
> dom = guest.start_install(False, meter =
meter)
> File
"/usr/lib/python2.6/site-packages/virtinst/Guest.py", line
628, in start_install
> File "/usr/lib/python2.6/site-packages/virtinst/Guest.py",
line 628, in start_install
> return self._do_install(consolecb, meter,
removeOld, wait)
> File
"/usr/lib/python2.6/site-packages/virtinst/Guest.py", line
726, in _do_install
> self.domain = self.conn.createLinux(install_xml,
0)
> File
"/usr/lib64/python2.6/site-packages/libvirt.py", line 1077,
in createLinux
> if ret is None:raise
libvirtError('virDomainCreateLinux() failed', conn=self)
> libvirtError: POST operation failed: xend_post: error from xen
daemon: <Fault 3: 'f'>
> '
> [Mon, 26 Oct 2009 16:16:38 virt-manager 3019] DEBUG (engine:377)
window counter decremented to 0
> [Mon, 26 Oct 2009 16:16:38 virt-manager 3019] DEBUG (engine:385)
Exiting app normally.
>
>
>
> Fasiha Ashraf
>
> --- On Mon, 26/10/09, Cole Robinson <crobinso@xxxxxxxxxx>
wrote:
>
> From: Cole Robinson <crobinso@xxxxxxxxxx>
> Subject: Re: [virt-tools-list] Unable to complete install: 'Domain
not found: xenUnifiedDomainLookupByName
> To: "Fasiha Ashraf" <feehapk@xxxxxxxxxxx>
> Cc: virt-tools-list@xxxxxxxxxx, bderzhavets@xxxxxxxxx, "Xen
users" <james.harper@xxxxxxxxxxxxxxxx>, "Fedora
Xen" <fedora-xen@xxxxxxxxxx>
> Date: Monday, 26 October, 2009, 5:58 PM
>
> On 10/26/2009 06:48 AM, Fasiha Ashraf wrote:
>> Hi all
>> I am facing this error while installing Guest VM on FC11 using
virt-manager
>> Unable to complete install '<class
'libvirt.libvirtError'> Domain not found:
xenUnifiedDomainLookupByName
>> Traceback (most recent call last):
>> File "/usr/share/virt-manager/virtManager/create.py",
line 1575, in do_install
>> dom = guest.start_install(False, meter =
meter)
>> File
"/usr/lib/python2.6/site-packages/virtinst/Guest.py", line
628, in start_install
>> return self._do_install(consolecb, meter,
removeOld, wait)
>> File
"/usr/lib/python2.6/site-packages/virtinst/Guest.py", line
726, in _do_install
>> self.domain =
self.conn.createLinux(install_xml, 0)
>> File
"/usr/lib64/python2.6/site-packages/libvirt.py", line 1077,
in createLinux
>> if ret is
>> None:raise
libvirtError('virDomainCreateLinux() failed', conn=self)
>> libvirtError: Domain not found: xenUnifiedDomainLookupByName
>> '
>> What should i do to avoid it? please help!
>> Boris! How did you create PV guests using virt-manager i am
following your article
>> http://bderzhavets.wordpress.com/2009/08/20/setup-libvirt-0-7-0-6-xen-3-4-1-dom0-on-to-fedora-11-64-bit/#comment-623
>> PFA, a screen-shot of the virt-manager
>>
>> Regards,
>> Fasiha Ashraf
>>
>
> CCing fedora-xen list.
>
> Rather than a screenshot, can you include:
>
> ~/.virt-manager/virt-manager.log
> virsh --connect xen:/// capabilities
> virsh --connect xen:/// version
>
> Thanks,
> Cole
|
Yahoo! India has a
new look. Take a sneak
peek.
-----Inline Attachment Follows-----
|
Add whatever you love to the Yahoo!
India homepage. Try now!
|
Now, send attachments up to 25MB with
Yahoo! India Mail. Learn how.
-----Inline Attachment Follows-----
|
Now, send attachments up to 25MB with
Yahoo! India Mail. Learn how.
|
From cricket scores to your friends. Try the Yahoo! India Homepage!_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
Home