[Xen-devel] Re: Picture Tutorial: How to Setup Slackware64 13.0 HVM domU with Xen 3.5-unstable pv-ops Dom0 Kernel 2.6.31.4 in Fedora 11 x86-64 Dom0

["Mr. Teo En Ming (Zhang Enming)" <space.time.universe@xxxxxxxxx>]

"brctl show" shows the virtual network interface eth0 of domain ID 2 (of Slackware64 13.0 HVM) added to the ethernet bridge eth0 in dom0.

[root@fedora11-x86-64-host xen]# brctl show
bridge name    bridge id        STP enabled    interfaces
eth0                                       no                     peth0
                                                                     tap2.0
                                                                     vif2.0

-rwxr-xr-x  1 root root    1289 2009-11-01 13:17 qemu-dm-slackware64.log

domid: 2
qemu: the number of cpus is 2
config qemu network with xen bridge for  tap2.0 eth0
Watching /local/domain/0/device-model/2/logdirty/next-active
Watching /local/domain/0/device-model/2/command
qemu_map_cache_init nr_buckets = 10000 size 4194304
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = 05686adf-dd94-b685-2a2b-112890bfee1d
Time offset set 0
cirrus_vga_enabled
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
xs_read(/vm/05686adf-dd94-b685-2a2b-112890bfee1d/log-throttling): read error
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/2/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error. /vm/05686adf-dd94-b685-2a2b-112890bfee1d/vncpasswd.
medium change watch on `hdc' (index: 1): /media/hitachi/slackware64-13.0-install-dvd.iso
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
cirrus vga map change while on lfb mode
mapping vram to e0000000 - e0400000
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.

-- 
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical Engineering)
Alma Maters:
(1) Singapore Polytechnic
(2) National University of Singapore
My blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
My Youtube videos: http://www.youtube.com/user/enmingteo
Email: space.time.universe@xxxxxxxxx
MSN: teoenming@xxxxxxxxxxx
Mobile Phone (SingTel): +65-9648-9798
Mobile Phone (Starhub Prepaid): +65-8369-2618
Age: 31 (as at 30 Oct 2009)
Height: 1.78 meters
Race: Chinese
Dialect: Hokkien
Street: Bedok Reservoir Road
Country: Singapore

On Sun, Nov 1, 2009 at 4:32 PM, Mr. Teo En Ming (Zhang Enming) <space.time.universe@xxxxxxxxx> wrote:

Hi,

I have just installed Slackware64 13.0 Linux as a HVM guest with Xen 3.5-unstable changeset 20143 pv-ops dom0 kernel 2.6.31.4. For more details, please refer to the following link:

http://enmingteo.wordpress.com/2009/11/01/picture-tutorial-how-to-setup-slackware64-13-0-hvm-domu-with-xen-3-5-unstable-pv-ops-dom0-kernel-2-6-31-4-in-fedora-11-x86-64-dom0/

There are 83 screenshots so far at this moment.

I have encountered a problem with the virtual network interface eth0 in the Slackware virtual machine. According to Slackware, there's no such interface.

lspci -v output shows a Realtek virtual ethernet controller by Xensource.

The kernel model 8139too has been loaded. lsmod shows it.

I have checked /etc/rc.d/rc.inet1.conf and eth0 is configured for DHCP. Windows XP HVM virtual network interface works for DHCP.

Then I tried to restart the networking subsystem by issuing the following commands:

# /etc/rc.d/rc.inet1 stop

# /etc/rc.d/rc.inet1 start

"ifconfig -a" output only shows up loopback interface lo and not eth0.

Screenshots pertaining to the problem are here:

http://enmingteo.files.wordpress.com/2009/11/slackware64-82.png

http://enmingteo.files.wordpress.com/2009/11/slackware64-83.png

Please advise.

Thank you.

--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical Engineering)
Alma Maters:
(1) Singapore Polytechnic
(2) National University of Singapore
My blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
My Youtube videos: http://www.youtube.com/user/enmingteo
Email: space.time.universe@xxxxxxxxx
MSN: teoenming@xxxxxxxxxxx
Mobile Phone (SingTel): +65-9648-9798
Mobile Phone (Starhub Prepaid): +65-8369-2618
Age: 31 (as at 30 Oct 2009)
Height: 1.78 meters
Race: Chinese
Dialect: Hokkien
Street: Bedok Reservoir Road
Country: Singapore

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel