Latest virt-manager doesn't work with the previous version of libvirt on fc11. You need to build xen and latest libvirt form rpm. Follow the steps below.
Install packages required by
rpmbuild:-
# yum install transfig texi2html libaio-devel
dev86 glibc-devel.i586
Download
xen-3.4.1-1.fc12.src.rpm
# wget
http://kojipkgs.fedoraproject.org/packages/xen/3.4.1/1.fc12/src/xen-3.4.1-1.fc12.src.rpm
#
rpm -iv xen-3.4.1-1.fc12.src.rpm
# cd /root/rpmbuild/SPECS
#
rpmbuild -ba ./xen.spec
To install hypervisor and
tools
# cd ../RPMS/x86_64
# yum install
xen-3.4.1-1.fc11.x86_64.rpm \
xen-debuginfo-3.4.1-1.fc11.x86_64.rpm
\
xen-devel-3.4.1-1.fc11.x86_64.rpm
\
xen-doc-3.4.1-1.fc11.x86_64.rpm
\
xen-hypervisor-3.4.1-1.fc11.x86_64.rpm
\
xen-libs-3.4.1-1.fc11.x86_64.rpm
\
xen-runtime-3.4.1-1.fc11.x86_64.rpm
To install new libvirt-0.7.0-6
#
cat > /etc/yum.repos.d/fedora-virt-preview.repo <<
EOF
[virt-preview]
name=Virtualization Rawhide for Fedora
11
baseurl=http://markmc.fedorapeople.org/virt-preview/f11/\$basearch/
enabled=1
gpgcheck=0
EOF
#
yum install libvirt libvirt-python python-virtinst \
virt-manager
virt-viewer
# rpm
-qa|grep
virt
the following list must be there may be with higher version numbers.
libvirt-client-0.7.0-6.fc11.x86_64
libvirt-python-0.7.0-6.fc11.x86_64
virt-viewer-0.2.0-1.fc11.x86_64
virt-manager-0.7.0-5.fc11.x86_64
libvirt-0.7.0-6.fc11.x86_64
python-virtinst-0.500.0-1.fc11.noarch
All the above steps should be done on the base kernel. Now compile and build xen with paravirt kernel. Now boot into the new xen kernel after starting xend run this
# xm info
to check. now you can use virt-manager in your set-up
Regards,
Fasiha Ashraf
--- On Thu, 29/10/09, Caz Yokoyama <cazyokoyama@xxxxxxxxx> wrote:
From: Caz Yokoyama <cazyokoyama@xxxxxxxxx>
Subject: RE: [Xen-devel] Virt-manager issue resolved
To: "'Fasiha Ashraf'" <feehapk@xxxxxxxxxxx>, "'xen'" <xen-devel@xxxxxxxxxxxxxxxxxxx>
Cc: virt-tools-list@xxxxxxxxxx, "'Fedora Xen'" <fedora-xen@xxxxxxxxxx>
Date: Thursday, 29 October, 2009, 6:19 PM
Could you summarize the
procedure? I am trying to run virt-manager on Fedora 11 with Xen-3.5-unstable
and Jeremy’s Dom0 (git://git.kernel.org/pub/scm/linux/kernel/git/Jeremy/xen.git).
I am wondering what option should be good on make on xen-3.5-unstable. I did
Make xen tools
Make install-xen
install-tools
What else I need do?
Booting dom0 is fine.
-caz
From:
xen-devel-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx]
On Behalf Of Fasiha Ashraf
Sent: Tuesday, October 27, 2009
4:49 AM
To: Cole Robinson; xen
Cc: Fedora Xen;
virt-tools-list@xxxxxxxxxx
Subject: [Xen-devel] Virt-manager
issue resolved
|
I have got para-virt option enabled by installing vm
using through http. the problem was, i was trying to install it from DVD. Now
the issue is it doesn't find the file on the givern location although i can
access them from the same location in browser. PFA, the screen shots for the
problem.
Regards
Fasiha Ashraf
--- On Mon, 26/10/09, Cole Robinson <crobinso@xxxxxxxxxx>
wrote:
From: Cole Robinson <crobinso@xxxxxxxxxx>
Subject: Re: [virt-tools-list] Unable to complete install: 'Domain not found:
xenUnifiedDomainLookupByName
To: "Fasiha Ashraf" <feehapk@xxxxxxxxxxx>
Cc: virt-tools-list@xxxxxxxxxx, bderzhavets@xxxxxxxxx, "Xen users"
<james.harper@xxxxxxxxxxxxxxxx>, "Fedora Xen"
<fedora-xen@xxxxxxxxxx>
Date: Monday, 26 October, 2009, 7:08 PM
On
10/26/2009 09:24 AM, Fasiha Ashraf wrote:
> It seem that its trying to install HVM guest that is not possible using
virt-manager.
> But you can see from the attached screen shot that virt type option is
disabled and i can't select paravirt from it. what should i do?
> here's the log .virt-manager/virt-manager.log
>
Please include the other information I asked for:
virsh --connect xen:/// capabilities
virsh --connect xen:/// version
- Cole
> [Mon, 26 Oct 2009 16:11:51 virt-manager 3019] DEBUG
(DistroInstaller:119) DistroInstaller location is a local file/path: /dev/sr0
> [Mon, 26 Oct 2009 16:12:01 virt-manager 3019] DEBUG
(DistroInstaller:119) DistroInstaller location is a local file/path: /dev/sr0
> [Mon, 26 Oct 2009 16:12:01 virt-manager 3019] DEBUG (create:877) Default
storage path is: /var/lib/libvirt/images/f.img
> [Mon, 26 Oct 2009 16:12:01 virt-manager 3019] DEBUG (VirtualDisk:737)
Path '/var/lib/libvirt/images' is target for pool 'default'. Creating volume
'f.img'.
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG
(DistroInstaller:119) DistroInstaller location is a local file/path: /dev/sr0
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (create:877) Default
storage path is: /var/lib/libvirt/images/f.img
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (VirtualDisk:737)
Path '/var/lib/libvirt/images' is target for pool 'default'. Creating volume
'f.img'.
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (create:1516)
Creating a VM f
> Type: xen,hvm
> UUID: 01f35eb7-fe09-c231-bfe0-1e9bfc6ff5a3
> Install Source: /dev/sr0
> OS: linux:fedora11
> Kernel args: None
> Memory: 512
> Max Memory: 512
> # VCPUs: 1
> Filesize: 7.0
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (create:1565)
Starting background install process
> [Mon, 26 Oct 2009 16:12:18 virt-manager 3019] DEBUG (Storage:950)
Creating storage volume 'f.img' with xml:
> <volume>
> <name>f.img</name>
> <capacity>7516192768</capacity>
> <allocation>7516192768</allocation>
> <target>
> <format type='raw'/>
> </target>
> </volume>
> [Mon, 26 Oct 2009 16:13:08 virt-manager 3019] DEBUG (Storage:973)
Storage volume 'f.img' install complete.
> [Mon, 26 Oct 2009 16:13:10 virt-manager 3019] DEBUG (Guest:724) Creating
guest from:
> <domain type='xen'>
> <name>f</name>
> <currentMemory>524288</currentMemory>
> <memory>524288</memory>
> <uuid>01f35eb7-fe09-c231-bfe0-1e9bfc6ff5a3</uuid>
> <os>
> <type arch='x86_64'>hvm</type>
>
<loader>/usr/lib/xen/boot/hvmloader</loader>
> <boot dev='cdrom'/>
> </os>
> <features>
> <acpi/><apic/><pae/>
> </features>
> <clock offset="utc"/>
> <on_poweroff>destroy</on_poweroff>
> <on_reboot>destroy</on_reboot>
> <on_crash>destroy</on_crash>
> <vcpu>1</vcpu>
> <devices>
> <emulator>/usr/lib64/xen/bin/qemu-dm</emulator>
> <disk type='file' device='disk'>
> <source
file='/var/lib/libvirt/images/f.img'/>
> <target dev='hda' bus='ide'/>
> </disk>
> <disk type='block' device='cdrom'>
> <source dev='/dev/sr0'/>
> <target dev='hdc' bus='ide'/>
> <readonly/>
> </disk>
> <interface type='bridge'>
> <source bridge='eth0'/>
> <mac address='00:16:36:08:9e:36'/>
> </interface>
> <input type='tablet' bus='usb'/>
> <graphics type='vnc' port='-1'/>
> <console type='pty'/>
> <sound model='es1370'/>
> </devices>
> </domain>
>
> [Mon, 26 Oct 2009 16:13:10 virt-manager 3019] DEBUG (netdevhelper:176)
Adding net device vif3.0 fe:ff:ff:ff:ff:ff /sys/class/net/vif3.0 (bridge:
None)
> [Mon, 26 Oct 2009 16:13:12 virt-manager 3019] DEBUG (engine:187) Tick is
slow, not running at requested rate.
> [Mon, 26 Oct 2009 16:13:13 virt-manager 3019] DEBUG (engine:187) Tick is
slow, not running at requested rate.
> [Mon, 26 Oct 2009 16:13:14 virt-manager 3019] DEBUG (engine:187) Tick is
slow, not running at requested rate.
> [Mon, 26 Oct 2009 16:13:15 virt-manager 3019] DEBUG (engine:187) Tick is
slow, not running at requested rate.
> [Mon, 26 Oct 2009 16:14:46 virt-manager 3019] DEBUG (netdevhelper:138)
Removing physical net device vif3.0 from list.
> [Mon, 26 Oct 2009 16:14:46 virt-manager 3019] DEBUG (opticalhelper:205)
Optical device removed: /org/freedesktop/Hal/devices/net_fe_ff_ff_ff_ff_ff
> [Mon, 26 Oct 2009 16:14:46 virt-manager 3019] DEBUG (error:76) Uncaught
Error: Unable to complete install: 'POST operation failed: xend_post: error
from xen $
> Traceback (most recent call last):
> File
"/usr/share/virt-manager/virtManager/create.py", line 1575, in
do_install
> dom = guest.start_install(False, meter = meter)
> File
"/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 628, in
start_install
> File "/usr/lib/python2.6/site-packages/virtinst/Guest.py",
line 628, in start_install
> return self._do_install(consolecb, meter, removeOld,
wait)
> File
"/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 726, in
_do_install
> self.domain = self.conn.createLinux(install_xml,
0)
> File
"/usr/lib64/python2.6/site-packages/libvirt.py", line 1077, in
createLinux
> if ret is None:raise
libvirtError('virDomainCreateLinux() failed', conn=self)
> libvirtError: POST operation failed: xend_post: error from xen daemon:
<Fault 3: 'f'>
> '
> [Mon, 26 Oct 2009 16:16:38 virt-manager 3019] DEBUG (engine:377) window
counter decremented to 0
> [Mon, 26 Oct 2009 16:16:38 virt-manager 3019] DEBUG (engine:385) Exiting
app normally.
>
>
>
> Fasiha Ashraf
>
> --- On Mon, 26/10/09, Cole Robinson <crobinso@xxxxxxxxxx>
wrote:
>
> From: Cole Robinson <crobinso@xxxxxxxxxx>
> Subject: Re: [virt-tools-list] Unable to complete install: 'Domain not
found: xenUnifiedDomainLookupByName
> To: "Fasiha Ashraf" <feehapk@xxxxxxxxxxx>
> Cc: virt-tools-list@xxxxxxxxxx, bderzhavets@xxxxxxxxx, "Xen
users" <james.harper@xxxxxxxxxxxxxxxx>,
"Fedora Xen" <fedora-xen@xxxxxxxxxx>
> Date: Monday, 26 October, 2009, 5:58 PM
>
> On 10/26/2009 06:48 AM, Fasiha Ashraf wrote:
>> Hi all
>> I am facing this error while installing Guest VM on FC11 using
virt-manager
>> Unable to complete install '<class 'libvirt.libvirtError'>
Domain not found: xenUnifiedDomainLookupByName
>> Traceback (most recent call last):
>> File "/usr/share/virt-manager/virtManager/create.py",
line 1575, in do_install
>> dom = guest.start_install(False, meter = meter)
>> File
"/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 628, in
start_install
>> return self._do_install(consolecb, meter,
removeOld, wait)
>> File
"/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 726, in
_do_install
>> self.domain = self.conn.createLinux(install_xml,
0)
>> File
"/usr/lib64/python2.6/site-packages/libvirt.py", line 1077, in
createLinux
>> if ret is
>> None:raise libvirtError('virDomainCreateLinux()
failed', conn=self)
>> libvirtError: Domain not found: xenUnifiedDomainLookupByName
>> '
>> What should i do to avoid it? please help!
>> Boris! How did you create PV guests using virt-manager i am
following your article
>> http://bderzhavets.wordpress.com/2009/08/20/setup-libvirt-0-7-0-6-xen-3-4-1-dom0-on-to-fedora-11-64-bit/#comment-623
>> PFA, a screen-shot of the virt-manager
>>
>> Regards,
>> Fasiha Ashraf
>>
>
> CCing fedora-xen list.
>
> Rather than a screenshot, can you include:
>
> ~/.virt-manager/virt-manager.log
> virsh --connect xen:/// capabilities
> virsh --connect xen:/// version
>
> Thanks,
> Cole
|
Yahoo!
India has a new look. Take a sneak peek.
-----Inline Attachment Follows-----
|
Home