[Xen-devel] Re: Xen 3.5-unstable, pv-ops dom0 kernel 2.6.31.4, Windows XP Home HVM Virtual Machine, PCI Express x16 Graphics Passthrough, Firewire Controller Passthrough, HD Audio Controller Passthrough, 3D Video and Disk I/O Benchmark Results

["Mr. Teo En Ming (Zhang Enming)" <space.time.universe@xxxxxxxxx>]

Debug logs for Xen and QEMU. Could any experts here help me examine
why OHCI IEEE 1394a Firewire Controller (built-in on Intel DQ45CB
motherboard) passthrough to Windows XP Home HVM domU is not
successful?

I hope all the information I have posted so far is useful to the
developers and Xen users.

xm dmesg output while running pv-ops dom0 kernel 2.6.31.4
====================================================

f_parse_binary: phdr: paddr=0x1000000 memsz=0x5d1000
(XEN) elf_parse_binary: phdr: paddr=0x15d1000 memsz=0xa6ae0
(XEN) elf_parse_binary: phdr: paddr=0x1678000 memsz=0x888
(XEN) elf_parse_binary: phdr: paddr=0x1679000 memsz=0x15c60
(XEN) elf_parse_binary: phdr: paddr=0x168ec60 memsz=0x2923a0
(XEN) elf_parse_binary: memory: 0x1000000 -> 0x1921000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff8168ee60
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
(XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN)     virt_base        = 0xffffffff80000000
(XEN)     elf_paddr_offset = 0x0
(XEN)     virt_offset      = 0xffffffff80000000
(XEN)     virt_kstart      = 0xffffffff81000000
(XEN)     virt_kend        = 0xffffffff81921000
(XEN)     virt_entry       = 0xffffffff8168ee60
(XEN)     p2m_base         = 0xffffffffffffffff
(XEN)  Xen  kernel: 64-bit, lsb, compat32
(XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1921000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   0000000230000000->0000000234000000 (2000128
pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff81000000->ffffffff81921000
(XEN)  Init. ramdisk: ffffffff81921000->ffffffff82095600
(XEN)  Phys-Mach map: ffffffff82096000->ffffffff82ff8800
(XEN)  Start info:    ffffffff82ff9000->ffffffff82ff94b4
(XEN)  Page tables:   ffffffff82ffa000->ffffffff83017000
(XEN)  Boot stack:    ffffffff83017000->ffffffff83018000
(XEN)  TOTAL:         ffffffff80000000->ffffffff83400000
(XEN)  ENTRY ADDRESS: ffffffff8168ee60
(XEN) Dom0 has maximum 2 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff815d1000
(XEN) elf_load_binary: phdr 1 at 0xffffffff815d1000 -> 0xffffffff81677ae0
(XEN) elf_load_binary: phdr 2 at 0xffffffff81678000 -> 0xffffffff81678888
(XEN) elf_load_binary: phdr 3 at 0xffffffff81679000 -> 0xffffffff8168ec60
(XEN) elf_load_binary: phdr 4 at 0xffffffff8168ec60 -> 0xffffffff817cc000
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type \047CTRL-a\047 three times to
switch input to Xen)
(XEN) Freed 132kB init memory.
(XEN) io_apic.c:2200:
(XEN) ioapic_guest_write: apic=0, pin=0, irq=0
(XEN) ioapic_guest_write: new_entry=00010900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2200:
(XEN) ioapic_guest_write: apic=0, pin=2, irq=0
(XEN) ioapic_guest_write: new_entry=00010900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) irq.c:1297: dom0: pirq 0 or irq 3 already mapped
(XEN) irq.c:1297: dom0: pirq 0 or irq 4 already mapped
(XEN) irq.c:1297: dom0: pirq 0 or irq 5 already mapped
(XEN) irq.c:1297: dom0: pirq 0 or irq 6 already mapped
(XEN) irq.c:1297: dom0: pirq 0 or irq 7 already mapped
(XEN) irq.c:1297: dom0: pirq 0 or irq 8 already mapped
(XEN) irq.c:1297: dom0: pirq 0 or irq 9 already mapped
(XEN) irq.c:1297: dom0: pirq 0 or irq 10 already mapped
(XEN) irq.c:1297: dom0: pirq 0 or irq 11 already mapped
(XEN) irq.c:1297: dom0: pirq 0 or irq 12 already mapped
(XEN) irq.c:1297: dom0: pirq 0 or irq 13 already mapped
(XEN) irq.c:1297: dom0: pirq 0 or irq 14 already mapped
(XEN) irq.c:1297: dom0: pirq 0 or irq 15 already mapped
(XEN) allocated vector for irq:16
(XEN) irq.c:1297: dom0: pirq 0 or irq 16 already mapped
(XEN) allocated vector for irq:17
(XEN) irq.c:1297: dom0: pirq 0 or irq 17 already mapped
(XEN) allocated vector for irq:18
(XEN) irq.c:1297: dom0: pirq 0 or irq 18 already mapped
(XEN) allocated vector for irq:19
(XEN) irq.c:1297: dom0: pirq 0 or irq 19 already mapped
(XEN) allocated vector for irq:20
(XEN) irq.c:1297: dom0: pirq 0 or irq 20 already mapped
(XEN) allocated vector for irq:21
(XEN) irq.c:1297: dom0: pirq 0 or irq 21 already mapped
(XEN) allocated vector for irq:22
(XEN) irq.c:1297: dom0: pirq 0 or irq 22 already mapped
(XEN) allocated vector for irq:23
(XEN) irq.c:1297: dom0: pirq 0 or irq 23 already mapped
(XEN) io_apic.c:2200:
(XEN) ioapic_guest_write: apic=0, pin=0, irq=0
(XEN) ioapic_guest_write: new_entry=00000900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) mce.c:694:d0 MCE: rdmsr MCG_CAP 0x806
(XEN) mce.c:694:d0 MCE: rdmsr MCG_CAP 0x806
(XEN) mce.c:694:d0 MCE: rdmsr MCG_CAP 0x806
(XEN) mce.c:871:d0 MCE: wr MC1_STATUS 0
(XEN) mce.c:871:d0 MCE: wr MC2_STATUS 0
(XEN) mce.c:871:d0 MCE: wr MC3_STATUS 0
(XEN) mce.c:871:d0 MCE: wr MC4_STATUS 0
(XEN) mce.c:871:d0 MCE: wr MC5_STATUS 0
(XEN) mce.c:694:d0 MCE: rdmsr MCG_CAP 0x806
(XEN) mce.c:694:d0 MCE: rdmsr MCG_CAP 0x806
(XEN) mce.c:694:d0 MCE: rdmsr MCG_CAP 0x806
(XEN) mce.c:871:d0 MCE: wr MC1_STATUS 0
(XEN) mce.c:871:d0 MCE: wr MC2_STATUS 0
(XEN) mce.c:871:d0 MCE: wr MC3_STATUS 0
(XEN) mce.c:871:d0 MCE: wr MC4_STATUS 0
(XEN) mce.c:871:d0 MCE: wr MC5_STATUS 0
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:03.0
(XEN) PCI add device 00:03.2
(XEN) PCI add device 00:03.3
(XEN) PCI add device 00:19.0
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1a.1
(XEN) PCI add device 00:1a.2
(XEN) PCI add device 00:1a.7
(XEN) PCI add device 00:1b.0
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) PCI add device 00:1d.2
(XEN) PCI add device 00:1d.7
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 00:1f.5
(XEN) PCI add device 01:00.0
(XEN) PCI add device 02:01.0
(XEN) Set CPU acpi_id(1) cpuid(0) Px State info:
(XEN)   _PPC: 0
(XEN) Set CPU acpi_id(1) cpuid(0) Px State info:
(XEN)   _PCT: descriptor=130, length=12, space_id=127, bit_width=64,
bit_offset=0, reserved=0, address=409
(XEN)   _PCT: descriptor=130, length=12, space_id=127, bit_width=16,
bit_offset=0, reserved=0, address=408
(XEN)   _PSS: state_count=2
(XEN)   State0: 2793MHz 27000mW 10us 10us 0x4a24 0x4a24
(XEN)   State1: 1596MHz 13800mW 10us 10us 0x616 0x616
(XEN)   _PSD: num_entries=5 rev=0 domain=1 coord_type=252 num_processors=1
(XEN)   _PPC: 0
(XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) CPU 0 initialization completed
(XEN) Set CPU acpi_id(2) cpuid(1) Px State info:
(XEN)   _PPC: 0
(XEN) Set CPU acpi_id(2) cpuid(1) Px State info:
(XEN)   _PCT: descriptor=130, length=12, space_id=127, bit_width=64,
bit_offset=0, reserved=0, address=409
(XEN)   _PCT: descriptor=130, length=12, space_id=127, bit_width=16,
bit_offset=0, reserved=0, address=408
(XEN)   _PSS: state_count=2
(XEN)   State0: 2793MHz 27000mW 10us 10us 0x4a24 0x4a24
(XEN)   State1: 1596MHz 13800mW 10us 10us 0x616 0x616
(XEN)   _PSD: num_entries=5 rev=0 domain=2 coord_type=252 num_processors=1
(XEN)   _PPC: 0
(XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) CPU 1 initialization completed
(XEN) irq.c:1050:d0 Cannot bind IRQ 0 to guest. Will not share with others.
(XEN) irq.c:1050:d0 Cannot bind IRQ 0 to guest. Will not share with others.
(XEN) irq.c:1050:d0 Cannot bind IRQ 0 to guest. Will not share with others.
(XEN) irq.c:1050:d0 Cannot bind IRQ 0 to guest. Will not share with others.
(XEN) io_apic.c:2200:
(XEN) ioapic_guest_write: apic=0, pin=19, irq=19
(XEN) ioapic_guest_write: new_entry=0001a913
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2200:
(XEN) ioapic_guest_write: apic=0, pin=18, irq=18
(XEN) ioapic_guest_write: new_entry=0001a912
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2200:
(XEN) ioapic_guest_write: apic=0, pin=23, irq=23
(XEN) ioapic_guest_write: new_entry=0001a917
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2200:
(XEN) ioapic_guest_write: apic=0, pin=19, irq=19
(XEN) ioapic_guest_write: new_entry=0001a913
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2200:
(XEN) ioapic_guest_write: apic=0, pin=18, irq=18
(XEN) ioapic_guest_write: new_entry=0001a912
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2200:
(XEN) ioapic_guest_write: apic=0, pin=18, irq=18
(XEN) ioapic_guest_write: new_entry=0001a912
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2200:
(XEN) ioapic_guest_write: apic=0, pin=18, irq=18
(XEN) ioapic_guest_write: new_entry=0001a912
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2200:
(XEN) ioapic_guest_write: apic=0, pin=22, irq=22
(XEN) ioapic_guest_write: new_entry=0001a916
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) [VT-D]iommu.c:1292:d0 domain_context_unmap:PCIe: bdf = 1:0.0
(XEN) [VT-D]iommu.c:1178:d0 domain_context_mapping:PCIe: bdf = 1:0.0
(XEN) domctl.c:887:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c
(XEN) domctl.c:887:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=20
(XEN) domctl.c:836:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20
(XEN) [VT-D]io.c:284:d0 VT-d irq bind: m_irq = 37 device = 4 intx = 0
(XEN) [VT-D]iommu.c:1299:d0 domain_context_unmap:PCI: bdf = 2:1.0
(XEN) [VT-D]iommu.c:1185:d0 domain_context_mapping:PCI: bdf = 2:1.0
(XEN) [VT-D]io.c:284:d0 VT-d irq bind: m_irq = 16 device = 5 intx = 0
(XEN) [VT-D]iommu.c:1292:d0 domain_context_unmap:PCIe: bdf = 0:1b.0
(XEN) [VT-D]iommu.c:1178:d0 domain_context_mapping:PCIe: bdf = 0:1b.0
(XEN) [VT-D]io.c:284:d0 VT-d irq bind: m_irq = 36 device = 6 intx = 0
(XEN) HVM1: HVM Loader
(XEN) HVM1: Detected Xen v3.5-unstable
(XEN) HVM1: CPU speed is 2800 MHz
(XEN) irq.c:243: Dom1 PCI link 0 changed 0 -> 5
(XEN) HVM1: PCI-ISA link 0 routed to IRQ5
(XEN) irq.c:243: Dom1 PCI link 1 changed 0 -> 10
(XEN) HVM1: PCI-ISA link 1 routed to IRQ10
(XEN) irq.c:243: Dom1 PCI link 2 changed 0 -> 11
(XEN) HVM1: PCI-ISA link 2 routed to IRQ11
(XEN) irq.c:243: Dom1 PCI link 3 changed 0 -> 5
(XEN) HVM1: PCI-ISA link 3 routed to IRQ5
(XEN) HVM1: pci dev 01:2 INTD->IRQ5
(XEN) HVM1: pci dev 01:3 INTA->IRQ10
(XEN) HVM1: pci dev 02:0 INTA->IRQ11
(XEN) HVM1: pci dev 03:0 INTA->IRQ5
(XEN) HVM1: Make vBAR = pBAR of assigned gfx
(XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000
(XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000
(XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000
(XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80
(XEN) HVM1: pci dev 05:0 INTA->IRQ10
(XEN) HVM1: pci dev 06:0 INTA->IRQ11
(XEN) HVM1: pci dev 02:0 bar 14 size 01000000: e0000008
(XEN) domctl.c:836:d0 memory_map:add: gfn=e1000 mfn=d3220 nr_mfns=4
(XEN) HVM1: pci dev 06:0 bar 10 size 00004000: e1000004
(XEN) domctl.c:836:d0 memory_map:add: gfn=e1004 mfn=d3101 nr_mfns=1
(XEN) HVM1: pci dev 05:0 bar 10 size 00001000: e1004000
(XEN) domctl.c:836:d0 memory_map:add: gfn=e1005 mfn=d3100 nr_mfns=1
(XEN) HVM1: pci dev 05:0 bar 14 size 00001000: e1005000
(XEN) HVM1: pci dev 02:0 bar 10 size 00000100: 0000c001
(XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c101
(XEN) HVM1: pci dev 03:0 bar 14 size 00000100: e1006000
(XEN) HVM1: pci dev 01:2 bar 20 size 00000020: 0000c201
(XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c221
(XEN) HVM1: Multiprocessor initialisation:
(XEN) HVM1:  - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs
[3/8] ... done.
(XEN) HVM1:  - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs
[3/8] ... done.
(XEN) HVM1: Testing HVM environment:
(XEN) HVM1:  - REP INSB across page boundaries ... passed
(XEN) HVM1:  - GS base MSRs and SWAPGS ... passed
(XEN) HVM1: Passed 2 of 2 tests
(XEN) HVM1: Writing SMBIOS tables ...
(XEN) HVM1: Loading ROMBIOS ...
(XEN) HVM1: 11900 bytes of ROMBIOS high-memory extensions:
(XEN) HVM1:   Relocating to 0xfc000000-0xfc002e7c ... done
(XEN) HVM1: Creating MP tables ...
(XEN) HVM1: Loading VGABIOS of passthroughed gfx ...
(XEN) HVM1: Loading PCI Option ROM ...
(XEN) HVM1:  - Manufacturer: http://etherboot.org
(XEN) HVM1:  - Product name: gPXE
(XEN) HVM1: Loading ACPI ...
(XEN) HVM1:  - Lo data: 000ea020-000ea04f
(XEN) HVM1:  - Hi data: fc003000-fc01261f
(XEN) HVM1: vm86 TSS at fc012800
(XEN) HVM1: BIOS map:
(XEN) HVM1:  c0000-cf7ff: VGA BIOS
(XEN) HVM1:  cf800-dbfff: Etherboot ROM
(XEN) HVM1:  eb000-eb175: SMBIOS tables
(XEN) HVM1:  f0000-fffff: Main BIOS
(XEN) HVM1: Invoking ROMBIOS ...
(XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
(XEN) HVM1: *** int 15h function AX=5f14, BX=078f not yet supported!
(XEN) HVM1: Bochs BIOS - build: 06/23/99
(XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
(XEN) HVM1: Options: apmbios pcibios eltorito PMM
(XEN) HVM1:
(XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
(XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes)
(XEN) HVM1: IDE time out
(XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom
(XEN) HVM1: IDE time out
(XEN) HVM1:
(XEN) HVM1:
(XEN) HVM1:
(XEN) HVM1: Press F12 for boot menu.
(XEN) HVM1:
(XEN) HVM1: Booting from Hard Disk...
(XEN) HVM1: Booting from 0000:7c00
(XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81
(XEN) HVM1: *** int 15h function AX=e980, BX=0066 not yet supported!
(XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806
(XEN) mce.c:714:d1 MCE: rdmsr MC0_CTL 0xffffffffffffffff
(XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806
(XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806
(XEN) irq.c:243: Dom1 PCI link 0 changed 5 -> 0
(XEN) irq.c:243: Dom1 PCI link 1 changed 10 -> 0
(XEN) irq.c:243: Dom1 PCI link 2 changed 11 -> 0
(XEN) irq.c:243: Dom1 PCI link 3 changed 5 -> 0
(XEN) domctl.c:846:d0 memory_map:remove: gfn=d2000 mfn=d2000 nr_mfns=1000
(XEN) domctl.c:846:d0 memory_map:remove: gfn=c0000 mfn=c0000 nr_mfns=10000
(XEN) domctl.c:846:d0 memory_map:remove: gfn=d0000 mfn=d0000 nr_mfns=2000
(XEN) domctl.c:911:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=80
(XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000
(XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000
(XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000
(XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80
(XEN) domctl.c:846:d0 memory_map:remove: gfn=e1004 mfn=d3101 nr_mfns=1
(XEN) domctl.c:846:d0 memory_map:remove: gfn=e1005 mfn=d3100 nr_mfns=1
(XEN) domctl.c:836:d0 memory_map:add: gfn=e1004 mfn=d3101 nr_mfns=1
(XEN) domctl.c:836:d0 memory_map:add: gfn=e1005 mfn=d3100 nr_mfns=1
(XEN) domctl.c:846:d0 memory_map:remove: gfn=e1000 mfn=d3220 nr_mfns=4
(XEN) domctl.c:836:d0 memory_map:add: gfn=e1000 mfn=d3220 nr_mfns=4
(XEN) grant_table.c:839:d1 Expanding dom (1) grant table from (4) to
(32) frames.
(XEN) irq.c:306: Dom1 callback via changed to GSI 24
(XEN) domctl.c:846:d0 memory_map:remove: gfn=e1004 mfn=d3101 nr_mfns=1
(XEN) domctl.c:846:d0 memory_map:remove: gfn=e1005 mfn=d3100 nr_mfns=1
(XEN) domctl.c:836:d0 memory_map:add: gfn=e1004 mfn=d3101 nr_mfns=1
(XEN) domctl.c:836:d0 memory_map:add: gfn=e1005 mfn=d3100 nr_mfns=1
(XEN) mce.c:694:d0 MCE: rdmsr MCG_CAP 0x806
(XEN) mce.c:694:d0 MCE: rdmsr MCG_CAP 0x806
(XEN) domctl.c:846:d0 memory_map:remove: gfn=e1000 mfn=d3220 nr_mfns=4
(XEN) domctl.c:836:d0 memory_map:add: gfn=e1000 mfn=d3220 nr_mfns=4
(XEN) domctl.c:846:d0 memory_map:remove: gfn=d2000 mfn=d2000 nr_mfns=1000
(XEN) domctl.c:846:d0 memory_map:remove: gfn=c0000 mfn=c0000 nr_mfns=10000
(XEN) domctl.c:846:d0 memory_map:remove: gfn=d0000 mfn=d0000 nr_mfns=2000
(XEN) domctl.c:911:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=80
(XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000
(XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000
(XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000
(XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80
(XEN) mce.c:694:d0 MCE: rdmsr MCG_CAP 0x806
(XEN) mce.c:694:d0 MCE: rdmsr MCG_CAP 0x806

I have the following qemu-dm-xxx.log logs. Which one should I post?

-rwxr-xr-x 1 enming enming   25743 2009-10-23 21:46 qemu-dm-winxphome32.log
-rwxr-xr-x 1 enming enming   26356 2009-10-23 21:46 qemu-dm-winxphome32.log.1
-rwxr-xr-x 1 enming enming   24576 2009-10-23 21:46 qemu-dm-winxphome32.log.10
-rwxr-xr-x 1 enming enming   24011 2009-10-23 21:46 qemu-dm-winxphome32.log.2
-rwxr-xr-x 1 enming enming   21425 2009-10-23 21:46 qemu-dm-winxphome32.log.3
-rwxr-xr-x 1 enming enming   23889 2009-10-23 21:46 qemu-dm-winxphome32.log.4
-rwxr-xr-x 1 enming enming   26001 2009-10-23 21:46 qemu-dm-winxphome32.log.5
-rwxr-xr-x 1 enming enming   25717 2009-10-23 21:46 qemu-dm-winxphome32.log.6
-rwxr-xr-x 1 enming enming    3671 2009-10-23 21:46 qemu-dm-winxphome32.log.7
-rwxr-xr-x 1 enming enming   24954 2009-10-23 21:46 qemu-dm-winxphome32.log.8
-rwxr-xr-x 1 enming enming   25286 2009-10-23 21:46 qemu-dm-winxphome32.log.9

I searched for the BDF of the firewire controller in all qemu-dm-*.log logs.

[enming@fedora11-x86-64-host 23oct2009-2026]$ grep 02:01.0 qemu*
qemu-dm-winxphome32.log:register_real_device: Assigning real physical
device 02:01.0 ...
qemu-dm-winxphome32.log:register_real_device: Real physical device
02:01.0 registered successfuly!
qemu-dm-winxphome32.log.1:register_real_device: Assigning real
physical device 02:01.0 ...
qemu-dm-winxphome32.log.1:register_real_device: Real physical device
02:01.0 registered successfuly!
qemu-dm-winxphome32.log.10:register_real_device: Assigning real
physical device 02:01.0 ...
qemu-dm-winxphome32.log.10:register_real_device: Real physical device
02:01.0 registered successfuly!
qemu-dm-winxphome32.log.2:register_real_device: Assigning real
physical device 02:01.0 ...
qemu-dm-winxphome32.log.2:register_real_device: Real physical device
02:01.0 registered successfuly!
qemu-dm-winxphome32.log.5:register_real_device: Assigning real
physical device 02:01.0 ...
qemu-dm-winxphome32.log.5:register_real_device: Real physical device
02:01.0 registered successfuly!
qemu-dm-winxphome32.log.6:register_real_device: Assigning real
physical device 02:01.0 ...
qemu-dm-winxphome32.log.6:register_real_device: Real physical device
02:01.0 registered successfuly!
qemu-dm-winxphome32.log.7:register_real_device: Assigning real
physical device 02:01.0 ...
qemu-dm-winxphome32.log.7:register_real_device: Real physical device
02:01.0 registered successfuly!
qemu-dm-winxphome32.log.8:register_real_device: Assigning real
physical device 02:01.0 ...
qemu-dm-winxphome32.log.8:register_real_device: Real physical device
02:01.0 registered successfuly!
qemu-dm-winxphome32.log.9:register_real_device: Assigning real
physical device 02:01.0 ...
qemu-dm-winxphome32.log.9:register_real_device: Real physical device
02:01.0 registered successfuly!

But I am still not sure which qemu-dm log to post.

I also have the following logs:

-rw-r--r-- 1 enming enming  484926 2009-10-23 21:46 xend-debug.log
-rw-r--r-- 1 enming enming  708962 2009-10-23 21:46 xend.log
-rw-r--r-- 1 enming enming 1048428 2009-10-23 21:46 xend.log.1
-rw-r--r-- 1 enming enming 1048399 2009-10-23 21:46 xend.log.2
-rw-r--r-- 1 enming enming      60 2009-10-23 21:46 xen-hotplug.log

-- 
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
Engineering)
Alma Maters:
(1) Singapore Polytechnic
(2) National University of Singapore
Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
Email: space.time.universe@xxxxxxxxx
MSN: teoenming@xxxxxxxxxxx
Mobile Phone: +65-9648-9798
Street: Bedok Reservoir Road
Republic of Singapore

On Sat, Oct 24, 2009 at 12:08 AM, Mr. Teo En Ming (Zhang Enming)
<space.time.universe@xxxxxxxxx> wrote:
> My presentation videos on Xen and VGA passthrough on Youtube:
>
> http://www.youtube.com/watch?v=HNEiSInrav0
>
> http://www.youtube.com/watch?v=_hOT_9LIG5w
>
> http://www.youtube.com/watch?v=1ia3IwG6tp4
>
> http://www.youtube.com/watch?v=5tLzYqIJ7Q0
>
> You can also check out my blog for more details.
>
> --
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
> Engineering)
> Alma Maters:
> (1) Singapore Polytechnic
> (2) National University of Singapore
> Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
> Email: space.time.universe@xxxxxxxxx
> MSN: teoenming@xxxxxxxxxxx
> Mobile Phone: +65-9648-9798
> Street: Bedok Reservoir Road
> Republic of Singapore
>
> On Fri, Oct 23, 2009 at 11:58 PM, Mr. Teo En Ming (Zhang Enming)
> <space.time.universe@xxxxxxxxx> wrote:
>> Linux bash shell scripts for PCI device passthrough:
>>
>> (1) passthru-nvidia.sh
>>
>> #!/bin/sh
>> echo "10de 06e4" > /sys/bus/pci/drivers/pci-stub/new_id
>> echo "0000:01:00.0" > /sys/bus/pci/devices/0000:01:00.0/driver/unbind
>> echo "0000:01:00.0" > /sys/bus/pci/drivers/pci-stub/bind
>>
>> (2) passthru-firewire.sh
>>
>> #!/bin/sh
>> echo "11c1 5811" > /sys/bus/pci/drivers/pci-stub/new_id
>> echo "0000:02:01.0" > /sys/bus/pci/devices/0000:02:01.0/driver/unbind
>> echo "0000:02:01.0" > /sys/bus/pci/drivers/pci-stub/bind
>>
>> #Unload firewire driver
>> rmmod firewire_ohci
>> rmmod firewire_core
>>
>> (3) passthru-audio.sh
>>
>> #!/bin/sh
>> echo "8086 3a6e" > /sys/bus/pci/drivers/pci-stub/new_id
>> echo "0000:00:1b.0" > /sys/bus/pci/devices/0000:00:1b.0/driver/unbind
>> echo "0000:00:1b.0" > /sys/bus/pci/drivers/pci-stub/bind
>>
>> rmmod snd_hda_intel
>>
>>
>> Windows XP Home Edition SP3 32-bit HVM virtual machine configuration
>> file /etc/xen/winxphome32:
>>
>> #import os, re
>> #arch = os.uname()[4]
>> #if re.search('64', arch):
>> #    arch_libdir = 'lib64'
>> #else:
>> #    arch_libdir = 'lib'
>>
>> kernel = "/usr/lib/xen/boot/hvmloader"
>> builder='hvm'
>> memory = 3072
>>
>> # Should be at least 2KB per MB of domain memory, plus a few MB per vcpu.
>> #shadow_memory = 8
>> name = "winxphome32"
>> vif = [ 'bridge=eth0' ]
>> acpi = 1
>> apic = 1
>> disk = [ 'phy:/dev/virtualmachines/winxphome32,hda,w',
>> 'phy:/dev/sr0,hdc:cdrom,r' ]
>>
>> #device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm'
>> #device_model = '/usr/' + 'lib' + '/xen/bin/qemu-dm'
>> device_model = 'qemu-dm'
>>
>> #-----------------------------------------------------------------------------
>> # boot on floppy (a), hard disk (c) or CD-ROM (d)
>> # default: hard disk, cd-rom, floppy
>> boot="cd"
>> sdl=0
>> vnc=1
>> vnclisten="192.168.1.2"
>> vncdisplay=1
>> vncunused=1
>> vncconsole=0
>> vncpasswd=''
>>
>> #serial='pty'
>> #usbdevice='tablet'
>> # onboard
>> #pci = [ '00:02.0' ]
>> # nVidia Geforce 8400 GS & firewire controller & HD audio controller
>> pci = [ '01:00.0','02:01.0','00:1b.0' ]
>> vcpus=2
>> # No passthrough
>> #gfx_passthru=0
>> # onboard
>> #gfx_passthru=1
>> # nvidia
>> gfx_passthru=2
>>
>> # Can only pass through one usb device at a time
>> usb=1
>> # USB Unity Green Mouse
>> #usbdevice = 'host:1bcf:0007'
>> # USB A1pro Black Mouse
>> usbdevice = 'host:15d9:0a41'
>> # USB Keyboard
>> #usbdevice = 'host:0603:00f2'
>> # USB Sony IC Recorder
>> #usbdevice = 'host:054c:0271'
>> # USB Lexmark X1270 Color Printer
>> #usbdevice = 'host:043d:00ff'
>> # USB Lexmark X1270 Photo Scanner
>> #usbdevice = 'host:043d:007d'
>> # USB Lexmark X1270 Generic Hub
>> #usbdevice = 'host:043d:007a'
>>
>> All-in-one script to call the above-mentioned scripts and HVM config:
>>
>> #!/bin/sh
>>
>> # Stops the BOINC Core Client
>> service boinc-client stop
>>
>> # Passthrough NVIDIA graphics card
>> /etc/xen/scripts/passthru-nvidia.sh
>> # Passthrough Firewire port
>> /etc/xen/scripts/passthru-firewire.sh
>> # Passthrough Audio Controller
>> /etc/xen/scripts/passthru-audio.sh
>>
>> ls -ltr /sys/bus/pci/drivers/pci-stub/
>> sleep 10
>>
>> # Start Windows XP guest domain
>> xm create winxphome32
>>
>> --
>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
>> Engineering)
>> Alma Maters:
>> (1) Singapore Polytechnic
>> (2) National University of Singapore
>> Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
>> Email: space.time.universe@xxxxxxxxx
>> MSN: teoenming@xxxxxxxxxxx
>> Mobile Phone: +65-9648-9798
>> Street: Bedok Reservoir Road
>> Republic of Singapore
>>
>>
>>
>> On Fri, Oct 23, 2009 at 11:41 PM, Mr. Teo En Ming (Zhang Enming)
>> <space.time.universe@xxxxxxxxx> wrote:
>>> Configuration for pv-ops dom0 kernel 2.6.31.4:
>>>
>>> ---snipped---
>>>
>>> --
>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
>>> Engineering)
>>> Alma Maters:
>>> (1) Singapore Polytechnic
>>> (2) National University of Singapore
>>> Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
>>> Email: space.time.universe@xxxxxxxxx
>>> MSN: teoenming@xxxxxxxxxxx
>>> Mobile Phone: +65-9648-9798
>>> Street: Bedok Reservoir Road
>>> Republic of Singapore
>>>
>>> On Fri, Oct 23, 2009 at 11:38 PM, Mr. Teo En Ming (Zhang Enming)
>>> <space.time.universe@xxxxxxxxx> wrote:
>>>> Multiple USB devices passthrough to Windows XP Home HVM domU status:
>>>>
>>>> 1st USB device can be specified in HVM configuration file. As a matter
>>>> of fact, only 1 USB device can be specified in HVM config. Subsequent
>>>> USB devices (2nd, 3rd, 4th, and so on) can be passed through to Win XP
>>>> Home HVM virtual machine by using "usb_add host:vendorid:productid"
>>>> command in QEMU monitor of the VNC server built into QEMU itself.
>>>>
>>>>
>>>> --
>>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
>>>> Engineering)
>>>> Alma Maters:
>>>> (1) Singapore Polytechnic
>>>> (2) National University of Singapore
>>>> Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
>>>> Email: space.time.universe@xxxxxxxxx
>>>> MSN: teoenming@xxxxxxxxxxx
>>>> Mobile Phone: +65-9648-9798
>>>> Street: Bedok Reservoir Road
>>>> Republic of Singapore
>>>>
>>>>
>>>>
>>>> On Fri, Oct 23, 2009 at 11:17 PM, Mr. Teo En Ming (Zhang Enming)
>>>> <space.time.universe@xxxxxxxxx> wrote:
>>>>> Attached screenshots for the disk drives and network adapters in
>>>>> device manager after installation of the Xen GPLPV drivers.
>>>>>
>>>>> --
>>>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
>>>>> Engineering)
>>>>> Alma Maters:
>>>>> (1) Singapore Polytechnic
>>>>> (2) National University of Singapore
>>>>> Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
>>>>> Email: space.time.universe@xxxxxxxxx
>>>>> MSN: teoenming@xxxxxxxxxxx
>>>>> Mobile Phone: +65-9648-9798
>>>>> Street: Bedok Reservoir Road
>>>>> Republic of Singapore
>>>>>
>>>>>
>>>>>
>>>>> On Fri, Oct 23, 2009 at 11:14 PM, Mr. Teo En Ming (Zhang Enming)
>>>>> <space.time.universe@xxxxxxxxx> wrote:
>>>>>> Intel DQ45CB HD Audio Controller Passthrough Status: Successful
>>>>>>
>>>>>> Attached screenshots for the HD audio controller in Device Manager.
>>>>>>
>>>>>> --
>>>>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
>>>>>> Engineering)
>>>>>> Alma Maters:
>>>>>> (1) Singapore Polytechnic
>>>>>> (2) National University of Singapore
>>>>>> Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
>>>>>> Email: space.time.universe@xxxxxxxxx
>>>>>> MSN: teoenming@xxxxxxxxxxx
>>>>>> Mobile Phone: +65-9648-9798
>>>>>> Street: Bedok Reservoir Road
>>>>>> Republic of Singapore
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Fri, Oct 23, 2009 at 11:11 PM, Mr. Teo En Ming (Zhang Enming)
>>>>>> <space.time.universe@xxxxxxxxx> wrote:
>>>>>>> OHCI IEEE 1394 Firewire Controller passthrough status: Not Successful
>>>>>>>
>>>>>>> Attached screenshots for the firewire controller in device manager.
>>>>>>>
>>>>>>> --
>>>>>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
>>>>>>> Engineering)
>>>>>>> Alma Maters:
>>>>>>> (1) Singapore Polytechnic
>>>>>>> (2) National University of Singapore
>>>>>>> Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
>>>>>>> Email: space.time.universe@xxxxxxxxx
>>>>>>> MSN: teoenming@xxxxxxxxxxx
>>>>>>> Mobile Phone: +65-9648-9798
>>>>>>> Street: Bedok Reservoir Road
>>>>>>> Republic of Singapore
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Fri, Oct 23, 2009 at 11:06 PM, Mr. Teo En Ming (Zhang Enming)
>>>>>>> <space.time.universe@xxxxxxxxx> wrote:
>>>>>>>> Version of Xen GPL PV Drivers Installed: 07/15/2009 0.10.0.86
>>>>>>>>
>>>>>>>> VGA / GFX pass-through status: Successful
>>>>>>>>
>>>>>>>> Attached screenshots for nVidia GeForce 8400 GS PCI Express x16
>>>>>>>> passthrough in Win XP Home DomU device manager.
>>>>>>>>
>>>>>>>> --
>>>>>>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
>>>>>>>> Engineering)
>>>>>>>> Alma Maters:
>>>>>>>> (1) Singapore Polytechnic
>>>>>>>> (2) National University of Singapore
>>>>>>>> Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
>>>>>>>> Email: space.time.universe@xxxxxxxxx
>>>>>>>> MSN: teoenming@xxxxxxxxxxx
>>>>>>>> Mobile Phone: +65-9648-9798
>>>>>>>> Street: Bedok Reservoir Road
>>>>>>>> Republic of Singapore
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Fri, Oct 23, 2009 at 10:54 PM, Mr. Teo En Ming (Zhang Enming)
>>>>>>>> <space.time.universe@xxxxxxxxx> wrote:
>>>>>>>>> Attached screenshots for Passmark PerformanceTest 7.0 3D Graphics
>>>>>>>>> benchmark results.
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
>>>>>>>>> Engineering)
>>>>>>>>> Alma Maters:
>>>>>>>>> (1) Singapore Polytechnic
>>>>>>>>> (2) National University of Singapore
>>>>>>>>> Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
>>>>>>>>> Email: space.time.universe@xxxxxxxxx
>>>>>>>>> MSN: teoenming@xxxxxxxxxxx
>>>>>>>>> Mobile Phone: +65-9648-9798
>>>>>>>>> Street: Bedok Reservoir Road
>>>>>>>>> Republic of Singapore
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Fri, Oct 23, 2009 at 10:49 PM, Mr. Teo En Ming (Zhang Enming)
>>>>>>>>> <space.time.universe@xxxxxxxxx> wrote:
>>>>>>>>>> Attached screenshots for Passmark Performance Test 7.0 Disk I/O
>>>>>>>>>> benchmark results.
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) 
>>>>>>>>>> BEng(Hons)(Mechanical
>>>>>>>>>> Engineering)
>>>>>>>>>> Alma Maters:
>>>>>>>>>> (1) Singapore Polytechnic
>>>>>>>>>> (2) National University of Singapore
>>>>>>>>>> Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
>>>>>>>>>> Email: space.time.universe@xxxxxxxxx
>>>>>>>>>> MSN: teoenming@xxxxxxxxxxx
>>>>>>>>>> Mobile Phone: +65-9648-9798
>>>>>>>>>> Street: Bedok Reservoir Road
>>>>>>>>>> Republic of Singapore
>>>>>>>>>>
>>>>>>>>>> On Fri, Oct 23, 2009 at 10:45 PM, Mr. Teo En Ming (Zhang Enming)
>>>>>>>>>> <space.time.universe@xxxxxxxxx> wrote:
>>>>>>>>>>> Host Operating System Domain 0: Fedora 11 Linux x86-64 64-bit
>>>>>>>>>>> Domain U: Windows XP Home Edition SP3 32-bit HVM Virtual Machine
>>>>>>>>>>> Xen Hypervisor Version: 3.5-unstable changeset 20143
>>>>>>>>>>> Paravirt-Operations Dom0 Kernel: 2.6.31.4 (Jeremy Fitzhardinge's 
>>>>>>>>>>> git tree)
>>>>>>>>>>> Intel GFX Passthrough Patches Applied: Version 1 (Provided by Han 
>>>>>>>>>>> Weidong Intel)
>>>>>>>>>>>
>>>>>>>>>>> Motherboard: Intel DQ45CB
>>>>>>>>>>> BIOS Version: 0093
>>>>>>>>>>> Processor: Intel Pentium Dual Core E6300
>>>>>>>>>>> Graphics Card: nVidia GeForce 8400 GS PCI Express x16
>>>>>>>>>>> Memory: 8GB DDR2-800
>>>>>>>>>>>
>>>>>>>>>>> Attached screenshots for 3 iterations of the hdtach disk I/O 
>>>>>>>>>>> benchmark
>>>>>>>>>>> test results.
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) 
>>>>>>>>>>> BEng(Hons)(Mechanical
>>>>>>>>>>> Engineering)
>>>>>>>>>>> Alma Maters:
>>>>>>>>>>> (1) Singapore Polytechnic
>>>>>>>>>>> (2) National University of Singapore
>>>>>>>>>>> Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
>>>>>>>>>>> Email: space.time.universe@xxxxxxxxx
>>>>>>>>>>> MSN: teoenming@xxxxxxxxxxx
>>>>>>>>>>> Mobile Phone: +65-9648-9798
>>>>>>>>>>> Street: Bedok Reservoir Road
>>>>>>>>>>> Republic of Singapore
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel