WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

RE: [Xen-devel] VT-d failure on Intel DQ43AP board

To: Takeshi HASEGAWA <hasegaw@xxxxxxxxx>, "Xen-devel@xxxxxxxxxxxxxxxxxxx" <Xen-devel@xxxxxxxxxxxxxxxxxxx>
Subject: RE: [Xen-devel] VT-d failure on Intel DQ43AP board
From: "Cui, Dexuan" <dexuan.cui@xxxxxxxxx>
Date: Mon, 31 Aug 2009 10:12:18 +0800
Accept-language: zh-CN, en-US
Acceptlanguage: zh-CN, en-US
Cc:
Delivery-date: Sun, 30 Aug 2009 19:11:46 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <87e595630908290921h2dc71efbl3947a9939bcd0c50@xxxxxxxxxxxxxx>
List-help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id: Xen developer discussion <xen-devel.lists.xensource.com>
List-post: <mailto:xen-devel@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
References: <87e595630908290921h2dc71efbl3947a9939bcd0c50@xxxxxxxxxxxxxx>
Sender: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
Thread-index: AcooxNmOh1FVB2J7TtW66aC4rN+17AAQ5sAg
Thread-topic: [Xen-devel] VT-d failure on Intel DQ43AP board
After you change your BIOS's VT-d setting from Disabled to Enabled (or from 
Enabled to Disabled), can you try power cycle your host (unplug the power cord 
and wait for some time)? If this works, it would be a BIOS issue.

Thanks,
-- Dexuan



-----Original Message-----
From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx 
[mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Takeshi HASEGAWA
Sent: 2009?8?30? 0:21
To: Xen-devel@xxxxxxxxxxxxxxxxxxx; Takeshi HASEGAWA
Subject: [Xen-devel] VT-d failure on Intel DQ43AP board

FYI

I got an Intel DQ43AP board and tried enabling VT-d,
but had a same problem that described below.
http://lists.xensource.com/archives/cgi-bin/extract-mesg.cgi?a=xen-devel&m=2009-06&i=8686c3cd0906300041r3b59d2c9i7a9d7c6705aa1ed4%40mail.gmail.com

> (XEN) clear_fault_bits: CAP_REG=0xffffffffffffffff

Chasing the thread, I figured out that BIOS on the board looks
have some problems around VT-d feature.

- already updated BIOS to recent version (ver 0027, 2009-7-28).
  
http://downloadcenter.intel.com/Filter_Results.aspx?strOSs=All&strTypes=All&ProductID=3119
- VT-d is enabled in BIOS configuration.
- tried not only xen 3.4.0 but also xen-unstable that I got a few
  hours ago, but got same result.

I expect to wait for BIOS updates, although let me know what I can do
if anyone have any ideas.



 __  __            _____  ____                     _        _     _
 \ \/ /___ _ __   |___ / | ___|    _   _ _ __  ___| |_ __ _| |__ | | ___
  \  // _ \ '_ \    |_ \ |___ \ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
  /  \  __/ | | |  ___) | ___) |__| |_| | | | \__ \ || (_| | |_) | |  __/
 /_/\_\___|_| |_| |____(_)____/    \__,_|_| |_|___/\__\__,_|_.__/|_|\___|

(XEN) Xen version 3.5-unstable (root@) (gcc  4.1.2 20080704 (Red Hat
4.1.2-44)) Sat Aug 29 23:51:56 JST 2009
(XEN) Latest ChangeSet: Thu Aug 27 11:25:34 2009 +0100 20128:e8004f6c254a
(XEN) Command line: iommu=1 com1=9600,8n1 console=com1,vga
iommu_inclusive_mapping=1
(XEN) Video information:
(XEN)  VGA is text mode 80x25, font 8x16
(XEN)  VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN)  Found 1 MBR signatures
(XEN)  Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)  0000000000000000 - 000000000009ec00 (usable)
(XEN)  000000000009ec00 - 00000000000a0000 (reserved)
(XEN)  00000000000e0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 00000000bd63d000 (usable)
(XEN)  00000000bd63d000 - 00000000bd6c0000 (ACPI NVS)
(XEN)  00000000bd6c0000 - 00000000bd81e000 (reserved)
(XEN)  00000000bd81e000 - 00000000bd832000 (ACPI NVS)
(XEN)  00000000bd832000 - 00000000bd93b000 (reserved)
(XEN)  00000000bd93b000 - 00000000bd943000 (ACPI data)
(XEN)  00000000bd943000 - 00000000bd95e000 (ACPI NVS)
(XEN)  00000000bd95e000 - 00000000bd97f000 (reserved)
(XEN)  00000000bd97f000 - 00000000bd985000 (ACPI NVS)
(XEN)  00000000bd985000 - 00000000bdb00000 (usable)
(XEN)  00000000bdc00000 - 00000000c0000000 (reserved)
(XEN)  00000000fed1c000 - 00000000fed20000 (reserved)
(XEN)  00000000ff000000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 000000013c000000 (usable)
(XEN) System RAM: 3991MB (4087128kB)
(XEN) ACPI: RSDP 000F03C0, 0024 (r2  INTEL)
(XEN) ACPI: XSDT BD941E18, 0064 (r1 INTEL  DQ43AP         1B MSFT    10013)
(XEN) ACPI: FACP BD940D98, 00F4 (r4  INTEL    A M I  6222004 MSFT    10013)
(XEN) ACPI: DSDT BD93B018, 49C1 (r1 INTEL  DQ43AP         1B INTL 20051117)
(XEN) ACPI: FACS BD949F40, 0040
(XEN) ACPI: APIC BD940F18, 006C (r2 INTEL  DQ43AP         1B MSFT    10013)
(XEN) ACPI: MCFG BD94BE18, 003C (r1 INTEL  DQ43AP         1B MSFT       97)
(XEN) ACPI: ASF! BD94AD18, 00A0 (r32 INTEL  DQ43AP         1B TFSM    F4240)
(XEN) ACPI: HPET BD94BD98, 0038 (r1 INTEL  DQ43AP         1B AMI.        3)
(XEN) ACPI: SPCR BD94BD18, 0050 (r1 INTEL  DQ43AP         1B AMI.        3)
(XEN) ACPI: TCPA BD94BC98, 0032 (r2 INTEL  DQ43AP         1B MSFT  1000013)
(XEN) ACPI: DMAR BD6BFD98, 0120 (r1 INTEL  DQ43AP         1B INTL        1)
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-000000013c000000
(XEN) Domain heap initialised
(XEN) DMI 2.4 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x408
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0]
(XEN) ACPI:                  wakeup_vec[bd949f4c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
(XEN) Processor #2 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
(XEN) Processor #3 7:7 APIC version 20
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) [VT-D]dmar.c:527: Host address width 36
(XEN) [VT-D]dmar.c:536: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:372: dmaru->address = fed90000
(XEN) [VT-D]dmar.c:325: endpoint: 0:1b.0
(XEN) [VT-D]dmar.c:536: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:372: dmaru->address = fed91000
(XEN) [VT-D]dmar.c:325: endpoint: 0:2.0
(XEN) [VT-D]dmar.c:325: endpoint: 0:2.1
(XEN) [VT-D]dmar.c:536: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:372: dmaru->address = fed92000
(XEN) [VT-D]dmar.c:325: endpoint: 0:3.0
(XEN) [VT-D]dmar.c:325: endpoint: 0:3.2
(XEN) [VT-D]dmar.c:325: endpoint: 0:3.3
(XEN) [VT-D]dmar.c:536: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:372: dmaru->address = fed93000
(XEN) [VT-D]dmar.c:381: found INCLUDE_ALL
(XEN) [VT-D]dmar.c:540: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:325: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:325: endpoint: 0:1d.1
(XEN) [VT-D]dmar.c:325: endpoint: 0:1d.2
(XEN) [VT-D]dmar.c:325: endpoint: 0:1d.7
(XEN) [VT-D]dmar.c:325: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:325: endpoint: 0:1a.1
(XEN) [VT-D]dmar.c:325: endpoint: 0:1a.2
(XEN) [VT-D]dmar.c:325: endpoint: 0:1a.7
(XEN) [VT-D]dmar.c:540: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:424: RMRR address range not in reserved memory base
= bdc00000 end = ffffffffbfffffff; iommu_inclusive_mapping=1 parameter
may be needed.
(XEN) [VT-D]dmar.c:325: endpoint: 0:2.0
(XEN) [VT-D]dmar.c:325: endpoint: 0:2.1
(XEN) Intel VT-d DMAR tables have been parsed.
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: Not using MMCONFIG.
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2666.437 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMX: Supported advanced features:
(XEN)  - APIC MMIO access virtualisation
(XEN)  - APIC TPR shadow
(XEN)  - Virtual NMI
(XEN)  - MSR direct-access bitmap
(XEN) HVM: VMX enabled
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU0 has no CMCI support
(XEN) CPU0: Intel(R) Core(TM)2 Quad CPU    Q8400  @ 2.66GHz stepping 0a
(XEN) Booting processor 1/1 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU1 has no CMCI support
(XEN) CPU1: Intel(R) Core(TM)2 Quad CPU    Q8400  @ 2.66GHz stepping 0a
(XEN) Booting processor 2/2 eip 8c000
(XEN) Initializing CPU#2
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 2
(XEN) Intel machine check reporting enabled on CPU#2.
(XEN) CPU2: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU2 has no CMCI support
(XEN) CPU2: Intel(R) Core(TM)2 Quad CPU    Q8400  @ 2.66GHz stepping 0a
(XEN) Booting processor 3/3 eip 8c000
(XEN) Initializing CPU#3
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 3
(XEN) Intel machine check reporting enabled on CPU#3.
(XEN) CPU3: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU3 has no CMCI support
(XEN) CPU3: Intel(R) Core(TM)2 Quad CPU    Q8400  @ 2.66GHz stepping 0a
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 4 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) Brought up 4 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) [VT-D]iommu.c:942:d32767 drhd->address = fed92000
(XEN) [VT-D]iommu.c:943:d32767 iommu->reg = ffff828bfff57000
(XEN) [VT-D]iommu.c:942:d32767 drhd->address = fed91000
(XEN) [VT-D]iommu.c:943:d32767 iommu->reg = ffff828bfff56000
(XEN) [VT-D]iommu.c:942:d32767 drhd->address = fed90000
(XEN) [VT-D]iommu.c:943:d32767 iommu->reg = ffff828bfff55000
(XEN) [VT-D]iommu.c:942:d32767 drhd->address = fed93000
(XEN) [VT-D]iommu.c:943:d32767 iommu->reg = ffff828bfff54000
(XEN) Intel VT-d Snoop Control supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation supported.
(XEN) Intel VT-d Interrupt Remapping supported.
(XEN) clear_fault_bits: CAP_REG=0xffffffffffffffff
(XEN) ----[ Xen-3.5-unstable  x86_64  debug=y  Not tainted ]----
(XEN) CPU:    0
(XEN) RIP:    e008:[<ffff828c80137375>] clear_fault_bits+0x5d/0xe6
(XEN) RFLAGS: 0000000000010006   CONTEXT: hypervisor
(XEN) rax: ffff828bfff5aff0   rbx: ffff8301387fd8a0   rcx: ffff828bfff57000
(XEN) rdx: 00000000ffffffff   rsi: 0000000000000282   rdi: ffff8301387fd8dc
(XEN) rbp: ffff828c80297d68   rsp: ffff828c80297d58   r8:  ffff8300000b8000
(XEN) r9:  0000000000000004   r10: 0000000000000010   r11: 0000000000000010
(XEN) r12: ffff8301387fd8d8   r13: ffff83013be726f0   r14: 0000000000000018
(XEN) r15: 0000000000000c00   cr0: 000000008005003b   cr4: 00000000000026f0
(XEN) cr3: 00000000bd49c000   cr2: ffff828bfff5aff8
(XEN) ds: 0000   es: 0000   fs: 0000   gs: 0000   ss: 0000   cs: e008
(XEN) Xen stack trace from rsp=ffff828c80297d58:
(XEN)    00000000000000c0 ffff8301387fd8a0 ffff828c80297da8 ffff828c80138024
(XEN)    0000000080297d88 ffff828bfff54000 ffff8301387fdb10 ffff828c80223790
(XEN)    0000000000000040 0000000000100000 ffff828c80297de8 ffff828c80138f69
(XEN)    0000000000000040 ffff828c80222400 000000000000001f ffff828c8024a350
(XEN)    ffff828c8024a470 0000000000000003 ffff828c80297e08 ffff828c80134e95
(XEN)    ffff828c80297e08 ffff828c8024a350 ffff828c80297f18 ffff828c8023d223
(XEN)    0000000000000000 0000000000000000 ffff828c80228675 ffffffffc0290000
(XEN)    ffff8300bd49cff8 ffff8300bd49dff8 0000000000228610 0000000000000000
(XEN)    0000000000000000 0000000000000000 ffff83000008bfc0 ffff83000008bf50
(XEN)    0000000000d1cbb0 0000000000000000 ffff83000008bf50 000000000008bf50
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000001000000 0000000800000000 000000010000006e
(XEN)    0000000000000003 00000000000002f8 0000000000000000 0000000000000000
(XEN)    0000000000000000 000000000000001f 00000000014b8018 0000000000000000
(XEN)    0000000000067ebc ffff828c801000b5 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<ffff828c80137375>] clear_fault_bits+0x5d/0xe6
(XEN)    [<ffff828c80138024>] init_vtd_hw+0x186/0x3fd
(XEN)    [<ffff828c80138f69>] intel_vtd_setup+0x586/0x6aa
(XEN)    [<ffff828c80134e95>] iommu_setup+0x1f/0xd2
(XEN)    [<ffff828c8023d223>] __start_xen+0x436b/0x4678
(XEN)
(XEN) Pagetable walk from ffff828bfff5aff8:
(XEN)  L4[0x105] = 00000000bd4a2027 5555555555555555
(XEN)  L3[0x02f] = 000000013be79063 5555555555555555
(XEN)  L2[0x1ff] = 000000013be78063 5555555555555555
(XEN)  L1[0x15a] = 0000000000000000 ffffffffffffffff
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) FATAL PAGE FAULT
(XEN) [error_code=0000]
(XEN) Faulting linear address: ffff828bfff5aff8
(XEN) ****************************************
(XEN)
(XEN) Reboot in five seconds...
(XEN) Resetting with ACPI MEMORY or I/O RESET_REG.


-- 
Takeshi HASEGAWA <hasegaw@xxxxxxxxx>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

<Prev in Thread] Current Thread [Next in Thread>