root@obelix:~# amtterm -u admin -p ****** 10.11.1.31 amtterm: NONE -> CONNECT (connection to host) ipv4 10.11.1.31 [10.11.1.31] 16994 open amtterm: CONNECT -> INIT (redirection initialization) amtterm: INIT -> AUTH (session authentication) amtterm: AUTH -> INIT_SOL (serial-over-lan initialization) amtterm: INIT_SOL -> RUN_SOL (serial-over-lan active) serial-over-lan redirection ok connected now, use ^] to escape __ __ _____ _ _ ___ _____ \ \/ /___ _ __ |___ /| || | / _ \ _ __ ___|___ / _ __ _ __ ___ \ // _ \ '_ \ |_ \| || |_| | | |__| '__/ __| |_ \ __| '_ \| '__/ _ \ / \ __/ | | | ___) |__ _| |_| |__| | | (__ ___) |__| |_) | | | __/ /_/\_\___|_| |_| |____(_) |_|(_)___/ |_| \___|____/ | .__/|_| \___| |_| (XEN) Xen version 3.4.0-rc3-pre (root@xxxxxxxxxxxxxxxxxx) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) Sun Apr 26 16:00:39 CEST 2009 (XEN) Latest ChangeSet: Fri Apr 24 13:46:17 2009 +0100 19575:dc5bd14a4675 (XEN) Command line: console=com1 com1=115200,8n1,0xe1c0,0 iommu=1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 0 MBR signatures (XEN) Found 5 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009e800 (usable) (XEN) 000000000009e800 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000bd6c1000 (usable) (XEN) 00000000bd6c1000 - 00000000bd703000 (ACPI NVS) (XEN) 00000000bd703000 - 00000000bd826000 (reserved) (XEN) 00000000bd826000 - 00000000bd83a000 (ACPI NVS) (XEN) 00000000bd83a000 - 00000000bd93c000 (reserved) (XEN) 00000000bd93c000 - 00000000bd93d000 (ACPI NVS) (XEN) 00000000bd93d000 - 00000000bd942000 (reserved) (XEN) 00000000bd942000 - 00000000bd94c000 (ACPI data) (XEN) 00000000bd94c000 - 00000000bd967000 (ACPI NVS) (XEN) 00000000bd967000 - 00000000bd986000 (reserved) (XEN) 00000000bd986000 - 00000000bd98c000 (ACPI NVS) (XEN) 00000000bd98c000 - 00000000bdb00000 (usable) (XEN) 00000000bdc00000 - 00000000c0000000 (reserved) (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) (XEN) 00000000ff000000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 000000023c000000 (usable) (XEN) System RAM: 8087MB (8281932kB) (XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL) (XEN) ACPI: XSDT BD94AE18, 005C (r1 INTEL DQ45CB 4F MSFT 10013) (XEN) ACPI: FACP BD949D98, 00F4 (r4 INTEL A M I 6222004 MSFT 10013) (XEN) ACPI: DSDT BD942018, 6818 (r1 INTEL DQ45CB 4F INTL 20051117) (XEN) ACPI: FACS BD952F40, 0040 (XEN) ACPI: APIC BD949F18, 006C (r2 INTEL DQ45CB 4F MSFT 10013) (XEN) ACPI: MCFG BD954E18, 003C (r1 INTEL DQ45CB 4F MSFT 97) (XEN) ACPI: ASF! BD953D18, 00A0 (r32 INTEL DQ45CB 4F TFSM F4240) (XEN) ACPI: SPCR BD954D18, 0050 (r1 INTEL DQ45CB 4F AMI. 3) (XEN) ACPI: TCPA BD954C98, 0032 (r2 INTEL DQ45CB 4F MSFT 1000013) (XEN) ACPI: DMAR BD93CC18, 0120 (r1 INTEL DQ45CB 4F INTL 1) (XEN) NUMA turned off (XEN) Faking a node at 0000000000000000-000000023c000000 (XEN) Domain heap initialised (XEN) DMI 2.4 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x408 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0] (XEN) ACPI: wakeup_vec[bd952f4c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) (XEN) Processor #1 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) (XEN) Processor #2 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) (XEN) Processor #3 7:7 APIC version 20 (XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) [VT-D]dmar.c:485: Host address width 36 (XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD (XEN) [VT-D]dmar.c:349: dmaru->address = fed90000 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1b.0 (XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD (XEN) [VT-D]dmar.c:349: dmaru->address = fed91000 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:2.0 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:2.1 (XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD (XEN) [VT-D]dmar.c:349: dmaru->address = fed92000 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:3.0 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:3.2 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:3.3 (XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD (XEN) [VT-D]dmar.c:349: dmaru->address = fed93000 (XEN) [VT-D]dmar.c:358: found INCLUDE_ALL (XEN) [VT-D]dmar.c:498: found ACPI_DMAR_RMRR (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.0 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.1 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.2 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.7 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.0 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.1 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.2 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.7 (XEN) [VT-D]dmar.c:498: found ACPI_DMAR_RMRR (XEN) [VT-D]dmar.c:401: RMRR address range not in reserved memory base = bdc00000 end = ffffffffbfffffff; iommu_inclusive_mapping=1 parameter may be needed. (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:2.0 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:2.1 (XEN) Intel VT-d DMAR tables have been parsed. (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 2833.099 MHz processor. (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 0 (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) HVM: VMX enabled (XEN) Intel machine check reporting enabled on CPU#0. (XEN) CPU0: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU0 has no CMCI support (XEN) CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a (XEN) Booting processor 1/1 eip 8c000 (XEN) Initializing CPU#1 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 1 (XEN) Intel machine check reporting enabled on CPU#1. (XEN) CPU1: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU1 has no CMCI support (XEN) CPU1: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a (XEN) Booting processor 2/2 eip 8c000 (XEN) Initializing CPU#2 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 2 (XEN) Intel machine check reporting enabled on CPU#2. (XEN) CPU2: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU2 has no CMCI support (XEN) CPU2: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a (XEN) Booting processor 3/3 eip 8c000 (XEN) Initializing CPU#3 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 3 (XEN) Intel machine check reporting enabled on CPU#3. (XEN) CPU3: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU3 has no CMCI support (XEN) CPU3: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a (XEN) Total of 4 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) checking TSC synchronization across 4 CPUs: passed. (XEN) Platform timer is 3.579MHz ACPI PM Timer