- configure script and build system changes.
- wind up new machine type.
- add -xen-* command line options.
Signed-off-by: Gerd Hoffmann <kraxel@xxxxxxxxxx>
---
Makefile.target | 8 +++++
configure | 34 +++++++++++++++++++++++
hw/boards.h | 3 ++
hw/xen.h | 20 ++++++++++++++
hw/xen_machine_pv.c | 70 +++++++++++++++++++++++++++++++++++++++++++++++++
qemu-options.hx | 11 +++++++
target-i386/machine.c | 3 ++
vl.c | 12 ++++++++
8 files changed, 161 insertions(+), 0 deletions(-)
create mode 100644 hw/xen.h
create mode 100644 hw/xen_machine_pv.c
diff --git a/Makefile.target b/Makefile.target
index 046427d..1da8055 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -563,6 +563,14 @@ ifdef CONFIG_BLUEZ
LIBS += $(CONFIG_BLUEZ_LIBS)
endif
+# xen backend driver support
+XEN_OBJS := xen_machine_pv.o
+ifeq ($(CONFIG_XEN), yes)
+ OBJS += $(XEN_OBJS)
+ LIBS += $(XEN_LIBS)
+ $(XEN_OBJS) : CFLAGS += -Wall -Wmissing-prototypes -Wstrict-prototypes
+endif
+
# SCSI layer
OBJS+= lsi53c895a.o esp.o
diff --git a/configure b/configure
index 5c62c59..212f2e9 100755
--- a/configure
+++ b/configure
@@ -189,6 +189,7 @@ aix="no"
blobs="yes"
fdt="yes"
sdl_x11="no"
+xen="yes"
# OS specific
if check_define __linux__ ; then
@@ -406,6 +407,8 @@ for opt do
;;
--disable-kqemu) kqemu="no"
;;
+ --disable-xen) xen="no"
+ ;;
--disable-brlapi) brlapi="no"
;;
--disable-bluez) bluez="no"
@@ -555,6 +558,7 @@ echo " Available drivers:
$audio_possible_drivers"
echo " --audio-card-list=LIST set list of emulated audio cards
[$audio_card_list]"
echo " Available cards: $audio_possible_cards"
echo " --enable-mixemu enable mixer emulation"
+echo " --disable-xen disable xen backend driver support"
echo " --disable-brlapi disable BrlAPI"
echo " --disable-vnc-tls disable TLS encryption for VNC server"
echo " --disable-vnc-sasl disable SASL encryption for VNC server"
@@ -768,6 +772,22 @@ else
fi
##########################################
+# xen probe
+
+if test "$xen" = "yes" ; then
+cat > $TMPC <<EOF
+#include <xenctrl.h>
+#include <xs.h>
+int main(void) { xs_daemon_open; xc_interface_open; }
+EOF
+ if $cc $ARCH_CFLAGS -c -o $TMPO $TMPC -lxenstore -lxenctrl 2> /dev/null ;
then
+ :
+ else
+ xen="no"
+ fi
+fi
+
+##########################################
# SDL probe
sdl_too_old=no
@@ -1197,6 +1217,7 @@ if test -n "$sparc_cpu"; then
echo "Target Sparc Arch $sparc_cpu"
fi
echo "kqemu support $kqemu"
+echo "xen support $xen"
echo "brlapi support $brlapi"
echo "Documentation $build_docs"
[ ! -z "$uname_release" ] && \
@@ -1496,6 +1517,9 @@ if test "$bluez" = "yes" ; then
echo "CONFIG_BLUEZ_LIBS=$bluez_libs" >> $config_mak
echo "#define CONFIG_BLUEZ 1" >> $config_h
fi
+if test "$xen" = "yes" ; then
+ echo "XEN_LIBS=-lxenstore -lxenctrl" >> $config_mak
+fi
if test "$aio" = "yes" ; then
echo "#define CONFIG_AIO 1" >> $config_h
echo "CONFIG_AIO=yes" >> $config_mak
@@ -1657,6 +1681,11 @@ case "$target_cpu" in
echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak
echo "#define CONFIG_KVM 1" >> $config_h
fi
+ if test "$xen" = "yes" -a "$target_softmmu" = "yes";
+ then
+ echo "CONFIG_XEN=yes" >> $config_mak
+ echo "#define CONFIG_XEN 1" >> $config_h
+ fi
;;
x86_64)
echo "TARGET_ARCH=x86_64" >> $config_mak
@@ -1672,6 +1701,11 @@ case "$target_cpu" in
echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak
echo "#define CONFIG_KVM 1" >> $config_h
fi
+ if test "$xen" = "yes" -a "$target_softmmu" = "yes"
+ then
+ echo "CONFIG_XEN=yes" >> $config_mak
+ echo "#define CONFIG_XEN 1" >> $config_h
+ fi
;;
alpha)
echo "TARGET_ARCH=alpha" >> $config_mak
diff --git a/hw/boards.h b/hw/boards.h
index 1e18ba6..215ccdc 100644
--- a/hw/boards.h
+++ b/hw/boards.h
@@ -34,6 +34,9 @@ extern QEMUMachine axisdev88_machine;
extern QEMUMachine pc_machine;
extern QEMUMachine isapc_machine;
+/* xen_machine.c */
+extern QEMUMachine xenpv_machine;
+
/* ppc.c */
extern QEMUMachine prep_machine;
extern QEMUMachine core99_machine;
diff --git a/hw/xen.h b/hw/xen.h
new file mode 100644
index 0000000..3c8da41
--- /dev/null
+++ b/hw/xen.h
@@ -0,0 +1,20 @@
+#ifndef QEMU_HW_XEN_H
+#define QEMU_HW_XEN_H 1
+/*
+ * public xen header
+ * stuff needed outside xen-*.c, i.e. interfaces to qemu.
+ * must not depend on any xen headers being present in
+ * /usr/include/xen, so it can be included unconditionally.
+ */
+
+/* xen-machine.c */
+enum xen_mode {
+ XEN_EMULATE = 0, // xen emulation, using xenner (default)
+ XEN_CREATE, // create xen domain
+ XEN_ATTACH // attach to xen domain created by xend
+};
+
+extern uint32_t xen_domid;
+extern enum xen_mode xen_mode;
+
+#endif /* QEMU_HW_XEN_H */
diff --git a/hw/xen_machine_pv.c b/hw/xen_machine_pv.c
new file mode 100644
index 0000000..21b5d9e
--- /dev/null
+++ b/hw/xen_machine_pv.c
@@ -0,0 +1,70 @@
+/*
+ * QEMU Xen PV Machine
+ *
+ * Copyright (c) 2007 Red Hat
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw.h"
+#include "pc.h"
+#include "sysemu.h"
+#include "boards.h"
+#include "xen.h"
+
+uint32_t xen_domid;
+enum xen_mode xen_mode = XEN_EMULATE;
+
+static void xen_init_pv(ram_addr_t ram_size, int vga_ram_size,
+ const char *boot_device,
+ const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ const char *cpu_model)
+{
+ CPUState *env;
+
+ /* Initialize a dummy CPU */
+ if (cpu_model == NULL) {
+#ifdef TARGET_X86_64
+ cpu_model = "qemu64";
+#else
+ cpu_model = "qemu32";
+#endif
+ }
+ env = cpu_init(cpu_model);
+ env->halted = 1;
+}
+
+QEMUMachine xenpv_machine = {
+ .name = "xenpv",
+ .desc = "Xen Para-virtualized PC",
+ .init = xen_init_pv,
+ .ram_require = (4 * 1024 * 1024) | RAMSIZE_FIXED,
+ .max_cpus = 1,
+};
+
+/*
+ * Local variables:
+ * indent-tabs-mode: nil
+ * c-indent-level: 4
+ * c-basic-offset: 4
+ * tab-width: 4
+ * End:
+ */
diff --git a/qemu-options.hx b/qemu-options.hx
index 6c58e2a..895fa89 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -1294,6 +1294,17 @@ Enable KVM full virtualization support. This option is
only available
if KVM support is enabled when compiling.
ETEXI
+#ifdef CONFIG_XEN
+DEF("xen-domid", HAS_ARG, QEMU_OPTION_xen_domid,
+ "-xen-domid id specify xen guest domain id\n")
+DEF("xen-create", 0, QEMU_OPTION_xen_create,
+ "-xen-create create domain using xen hypercalls, bypassing xend\n"
+ " warning: should not be used when xend is in use\n")
+DEF("xen-attach", 0, QEMU_OPTION_xen_attach,
+ "-xen-attach attach to existing xen domain\n"
+ " xend will use this when starting qemu\n")
+#endif
+
DEF("no-reboot", 0, QEMU_OPTION_no_reboot, \
"-no-reboot exit instead of rebooting\n")
STEXI
diff --git a/target-i386/machine.c b/target-i386/machine.c
index 1cf49d5..1b0d36d 100644
--- a/target-i386/machine.c
+++ b/target-i386/machine.c
@@ -9,6 +9,9 @@ void register_machines(void)
{
qemu_register_machine(&pc_machine);
qemu_register_machine(&isapc_machine);
+#ifdef CONFIG_XEN
+ qemu_register_machine(&xenpv_machine);
+#endif
}
static void cpu_put_seg(QEMUFile *f, SegmentCache *dt)
diff --git a/vl.c b/vl.c
index 5e6c621..76fca5a 100644
--- a/vl.c
+++ b/vl.c
@@ -138,6 +138,7 @@ int main(int argc, char **argv)
#include "hw/isa.h"
#include "hw/baum.h"
#include "hw/bt.h"
+#include "hw/xen.h"
#include "bt-host.h"
#include "net.h"
#include "monitor.h"
@@ -4943,6 +4944,17 @@ int main(int argc, char **argv, char **envp)
run_as = optarg;
break;
#endif
+#ifdef CONFIG_XEN
+ case QEMU_OPTION_xen_domid:
+ xen_domid = atoi(optarg);
+ break;
+ case QEMU_OPTION_xen_create:
+ xen_mode = XEN_CREATE;
+ break;
+ case QEMU_OPTION_xen_attach:
+ xen_mode = XEN_ATTACH;
+ break;
+#endif
}
}
}
--
1.6.1.3
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home