Hardware-issue are the network-drivers on that HP, the're too new for 2.6.18
I don't know exactly when they got statically bound into the kernel, but at
least after 2.6.21.
It's part of the tg3-drivers:
Tigon3 [partno(N/A) rev a200 PHY(5722/5756)] (PCI Express) 10/100/1000Base-T
Ethernet
I need gigabit. I tried to use the drivers seperatly and compile them in with
xen-2.6.18, but they all went down to 100MBit, only the newer kernel-internal
tigon3 went up to gigabit.
So i'm stuck to newer kernels....
Florian
> -----Ursprüngliche Nachricht-----
> Von: Carsten Schiers [mailto:carsten@xxxxxxxxxx]
> Gesendet: Freitag, 6. März 2009 15:34
> An: Rustedt, Florian
> Betreff: AW: [Xen-devel] The right way to get an actual
> xen-enabledkernel-source tree?
>
> Please read carefully (and please check mail subject): the
> only stable xen source tree is 2.6.18.8 available on
> xensource. Other available kernels are done by various distro
> people. None of them I would consider stable. What exact
> hardware issue you have?
>
> BTW: Building and modifying Debian kernels is a pain (I
> think). Wouldn't do that.
>
> GrC.
>
> ----- Originalnachricht -----
> Von: "Rustedt, Florian" <Florian.Rustedt@xxxxxxxxxxx>
> Gesendet: Fre, 6.3.2009 15:25
> An: Carsten Schiers <carsten@xxxxxxxxxx>
> Betreff: AW: Released from eSafe SPAM quarantine: AW:
> [Xen-devel] The right way to get an actual
> xen-enabledkernel-source tree?
>
> Well, certainly because i don't need a complete distro if i
> want xen, i only need a xen-kernel-source-tree, that i can
> use for building a kernel in my prefered distro...
>
> It's no prob to get a "foreign" kernel running in gentoo,
> prob is only to fetch a working xen-tree grater than 2.6.21,
> because that's what i need (hardware).
>
> I really just need a working source-dir with a patched stable
> kernel, that's all ;)
>
> I am not going to question the whole distro for that, sorry,
> but that 's not the point for solving the problem...
>
> ATM i am looking forward to someone on the users-list, who
> could perhaps provide me a lenny-2.6.26-kernel source-tree, i
> hope this will solve all my worries...
>
> Else i perhaps will try out now to fetch the RH or
> CENTOS-src-rpm, perhaps that's another promising run.
>
> Cheers, Florian
>
> > -----Ursprüngliche Nachricht-----
> > Von: Carsten Schiers [mailto:carsten@xxxxxxxxxx]
> > Gesendet: Freitag, 6. März 2009 13:56
> > An: Rustedt, Florian
> > Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
> > Betreff: Released from eSafe SPAM quarantine: AW: [Xen-devel] The
> > right way to get an actual xen-enabledkernel-source tree?
> >
> > Why don't you use a distribution that includes what you
> need, such as
> > Debian Etch and Lenny or CentOS, especially, if you need it stable?
> >
> > BR, Carsten.
> >
> > ----- Originalnachricht -----
> > Von: "Rustedt, Florian" <Florian.Rustedt@xxxxxxxxxxx>
> > Gesendet: Fre, 6.3.2009 13:05
> > An: Pasi Kärkkäinen <pasik@xxxxxx>
> > Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
> > Betreff: AW: [Xen-devel] The right way to get an actual
> > xen-enabledkernel-source tree?
> >
> > Thanks a lot for the fast answer and yes, i need it for dom0!
> >
> > Does this "pv_ops"-way mean, that i would have to use an not
> > productional usable kernel?
> > So perhaps it would be better for me, to patch a kernel with the
> > 2.6.18 patchset?
> >
> > If it is usable:
> > As i never used git before, could you please provide me the
> > commandline to use it for a 2.6.28 kernel?
> >
> > Is it like patching in that way:
> > 1. download 2.6.28(.rcxx) vanilla-sources 2. untar and go to that
> > directory 3. do "git something" now?
> >
> > Cheers, Florian
> >
> > > -----Ursprüngliche Nachricht-----
> > > Von: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
> > > [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] Im Auftrag
> von Pasi
> > > Kärkkäinen
> > > Gesendet: Freitag, 6. März 2009 12:47
> > > An: Rustedt, Florian
> > > Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
> > > Betreff: Re: [Xen-devel] The right way to get an actual
> > > xen-enabledkernel-source tree?
> > >
> > > On Fri, Mar 06, 2009 at 12:22:12PM +0100, Rustedt, Florian wrote:
> > > > Hello list,
> > > >
> > > > I need a xen-kernel in version 2.6.28, but can't find any
> > > hint, how i can come to this point?
> > > > AFAIK the xensources stopped with 2.6.18?
> > > >
> > > > So what'S actual the way to get a vanilla-kernel and patch
> > > it with xen?
> > > >
> > >
> > > Xen domU support has been in vanilla Linux kernels since
> > > 2.6.23 (pv_ops domU).
> > >
> > > pv_ops based dom0 support is currently under development and it's
> > > planned to get merged to 2.6.30 vanilla kernel.
> > >
> > > See: http://wiki.xensource.com/xenwiki/XenParavirtOps
> > >
> > > latest development/unstable pv_ops Linux tree with dom0 patches:
> > > http://git.kernel.org/?p=linux/kernel/git/jeremy/xen.git;a=sho
> > > rtlog;h=xen/dom0/hackery
> > >
> > > -- Pasi
> > >
> > > _______________________________________________
> > > Xen-devel mailing list
> > > Xen-devel@xxxxxxxxxxxxxxxxxxx
> > > http://lists.xensource.com/xen-devel
> > >
> > **************************************************************
> > ********************************
> > IMPORTANT: The contents of this email and any attachments are
> > confidential. They are intended for the named recipient(s) only.
> > If you have received this email in error, please notify the system
> > manager or the sender immediately and do not disclose the
> contents to
> > anyone or make copies thereof.
> > *** eSafe scanned this email for viruses, vandals, and malicious
> > content. ***
> > **************************************************************
> > ********************************
> >
> >
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-devel
> >
> >
> **************************************************************
> ********************************
> IMPORTANT: The contents of this email and any attachments are
> confidential. They are intended for the named recipient(s) only.
> If you have received this email in error, please notify the
> system manager or the sender immediately and do not disclose
> the contents to anyone or make copies thereof.
> *** eSafe scanned this email for viruses, vandals, and
> malicious content. ***
> **************************************************************
> ********************************
>
>
**********************************************************************************************
IMPORTANT: The contents of this email and any attachments are confidential.
They are intended for the
named recipient(s) only.
If you have received this email in error, please notify the system manager or
the sender immediately and do
not disclose the contents to anyone or make copies thereof.
*** eSafe scanned this email for viruses, vandals, and malicious content. ***
**********************************************************************************************
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home