[Xen-devel] Continuing problems booting

[M A Young <m.a.young@xxxxxxxxxxxx>]

I am still having problems getting my dom0 machines to boot - I am not 
sure it is a single problem but there do still seem to be ata issues. This 
is with the recent apic patch applied. The full boot log (compressed) is 
attached up to the point it stopped responding.
        Michael Young

ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
xen_set_ioapic_routing: irq 18 gsi 18 vector 160 ioapic 0 pin 18 
triggering 1 polarity 1
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata1.00: qc timeout (cmd 0xef)
ata1.00: failed to IDENTIFY (SPINUP failed, err_mask=0x4)
ata1.00: qc timeout (cmd 0xef)
ata1.00: failed to IDENTIFY (SPINUP failed, err_mask=0x4)
ata1.00: qc timeout (cmd 0xef)
ata1.00: failed to IDENTIFY (SPINUP failed, err_mask=0x4)
ata2.00: ATAPI: CD-952E/AKV, R7AR, max UDMA/33
ata2.00: configured for UDMA/33
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x5)
ata2.00: configured for UDMA/33
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x5)
ata2.00: limiting speed to UDMA/33:PIO3
ata2.00: configured for UDMA/33
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x5)
ata2.00: disabled
ata2: soft resetting link
ata2: EH complete

boot.log.bz2
Description: Binary data

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel