Re: [Xen-devel] Build vmlinuz-2.6.29-rc5-tip

[Boris Derzhavets <bderzhavets@xxxxxxxxx>]

Mark,
I've just tried. Your procedure works grate.
I will try to load kernel (under Xen Unstable) after patching per Jeremy.
Thank you.
Boris.
P.S.
root@ServerXen331:~# git --version
git version 1.5.6.3


--- On Tue, 2/17/09, Marc - A. Dahlhaus [ Administration | Westermann GmbH ] <mad@xxxxxx> wrote:

From: Marc - A. Dahlhaus [ Administration | Westermann GmbH ] <mad@xxxxxx>
Subject: Re: [Xen-devel] Build vmlinuz-2.6.29-rc5-tip
To: bderzhavets@xxxxxxxxx
Cc: "xen-devel@xxxxxxxxxxxxxxxxxxx" <xen-devel@xxxxxxxxxxxxxxxxxxx>
Date: Tuesday, February 17, 2009, 9:09 AM

Hello Boris,


with git >= v1.5 you can get to the right branch even simpler with:

git clone
 git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
linux-2.6-xen
cd linux-2.6-xen
git checkout origin/xen/dom0/hackery -b xen/dom0/hackery

To update:
git pull

Works like a charm here but i didn't had the time to boottest it...


Am Dienstag, den 17.02.2009, 05:31 -0800 schrieb Boris Derzhavets:
> Hardware config:-
> C2D E8400, 8 GB RAM, ASUS P5K Premium/WIFI (Intel P35+Intel ICH9R),
> 2x250 SATA Seagate Barracuda (no RAID). Bios settings for ICH9R -
> AHCI.
> Details here:-
>
http://bderzhavets.wordpress.com/2009/02/17/setup-xen-unstable-dom0-via-2629-rc5-pv_ops-enabled-kernel-on-intel-sataahci/
> 
> 
> --- On Tue, 2/17/09, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
>         From: Pasi Kärkkäinen <pasik@xxxxxx>
>         Subject: Re: [Xen-devel] Build vmlinuz-2.6.29-rc5-tip
>         To: "Boris Derzhavets"
 <bderzhavets@xxxxxxxxx>
>         Cc: "Ian Campbell" <Ian.Campbell@xxxxxxxxxxxxx>,
"Jeremy
>         Fitzhardinge" <jeremy@xxxxxxxx>,
>         "xen-devel@xxxxxxxxxxxxxxxxxxx"
>         <xen-devel@xxxxxxxxxxxxxxxxxxx>
>         Date: Tuesday, February 17, 2009, 8:11 AM
>         
>         On Tue, Feb 17, 2009 at 03:58:45AM -0800, Boris Derzhavets wrote:
>         > 
>         > It works fine.
>         > Thank you once again
>         >
>         
>         What kind of hardware are you running on? Which disk controller? 
>         
>         64-bit hypervisor/dom0 or 32-bit PAE? 
>         
>         Would you like to send your dom0 kernel .config ? 
>         
>         And your grub.conf .. 
>         
>         Thanks!
>         
>         Nice to hear you got it
 running/working!
>         
>         -- Pasi
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel