WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

re: RE: re: Re: [Xen-devel] about pvgrub

To: <dongdong.zhang@xxxxxxxxx>,<zhigang.x.wang@xxxxxxxxxx>
Subject: re: RE: re: Re: [Xen-devel] about pvgrub
From: "James Song" <jsong@xxxxxxxxxx>
Date: Fri, 10 Oct 2008 01:20:13 -0600
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
Delivery-date: Fri, 10 Oct 2008 00:20:40 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id: Xen developer discussion <xen-devel.lists.xensource.com>
List-post: <mailto:xen-devel@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
fdisk -l:

Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x4b3ff212

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1          10       80293+  de  Dell Utility
/dev/sda2              11        6146    49287420    7  HPFS/NTFS
/dev/sda3            6147        6538     3148740   82  Linux swap /
Solaris
/dev/sda4   *        6539       14593    64701787+   f  W95 Ext'd (LBA)
/dev/sda5           11761       14593    22756041   83  Linux
/dev/sda6            6539       11760    41945652   83  Linux

Partition table entries are not in disk order


df :

/dev/sda6             41286768  29801560   9387928  77% /
udev                    529448      1048    528400   1% /dev

anything wrong?


best regards,
-- James
>>> "Zhang, Dongdong" <dongdong.zhang@xxxxxxxxx> 08年10月10日 下午 14:55 >>>
James,
    if you see "grubdom>", this maybe grub can't find its config file
    Check your harddisk partition number to make sure that is correct or
check the position of grub config file


Regards,
Dongdong Zhang

-----Original Message-----
From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of James Song
Sent: 2008年10月10日 14:47
To: zhigang.x.wang@xxxxxxxxxx
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: 答复: Re: [Xen-devel] about pvgrub

Thank Zhigang Wang for your response. I have test pvgrub with this
config file:

#pv-config
kernel = "/usr/lib/xen/boot/pv-grub-x86_32.gz"
extra = "(hd0,5)/boot/grub/menu.lst"
memory = 512
name = "ExampleDomain"
disk = [ 'file:/var/lib/xen/images/opensuse11-1/disk0,xvda,w' ]
vif = [ "bridge=eth0" ]
root = "/dev/sda5 ro"

start pvgrub with "xm cr pv-config -c"
only see the grub command line like this:
    GNU GRUB  version 0.97  (524288K lower / 0K upper memory)

       [ Minimal BASH-like line editing is supported.   For
         the   first   word,  TAB  lists  possible  command
         completions.  Anywhere else TAB lists the possible
         completions of a device/filename. ]

grubdom>


what's wrong?

--- Song Wei



best regards,
-- James
>>> Zhigang Wang <zhigang.x.wang@xxxxxxxxxx> 08年10月09日 下午 19:20 >>>
This should due to the bad virtual framebuffer support in xenfb.

see bug: http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=1365

you can try without:

> vfb = [ 'type=vnc,vnclisten=127.0.0.1,vncdisplay=1' ]

zhigang

James Song wrote:
> Hi,
>     I test pvgrub on xen-3.3.0. After starting pvgrub with "xm cr
xmexample.pv-grub", I can see nothing but qemu window.  With "xm li" , I
can see this domain is running:
>  Name                                            ID   Mem VCPUs
State   Time(s)
> Domain-0                                          0  1024     2
      r-----    173.0
> ExampleDomain                                3   512      1
  r-----     18.7
>
> #config file
> kernel = "/usr/lib/xen/boot/pv-grub.gz"
> extra = "(hd0,5)/boot/grub/menu.lst"
> memory = 512
> name = "ExampleDomain"
> boot = "d"
> disk = [ 'file:/var/lib/xen/images/opensuse11/disk0,xvda,w' ]
> vif = [ "bridge=eth0" ]
> vfb = [ 'type=vnc,vnclisten=127.0.0.1,vncdisplay=1' ]
>
>
> #grub file
> default 0
> timeout 8
> gfxmenu (hd0,5)/boot/message
> ###Don't change this comment - YaST2 identifier: Original name: xen###
> title Xen -- openSUSE 11.0 - 2.6.26-14
>     root (hd0,5)
>     kernel /boot/xen.gz dom0_mem=1024M
>     module /boot/vmlinuz-2.6.26-14-xen
root=/dev/disk/by-id/scsi-SATA_ST9120823ASG_5NJ0WTL5-part6
resume=/dev/sda3 splash=silent showopts vga=0x314
>     module /boot/initrd-2.6.26-14-xen
>
> ###Don't change this comment - YaST2 identifier: Original name:
linux###
> title openSUSE 11.0 - 2.6.25.5-1.1 (pae)
>     root (hd0,5)
>     kernel /boot/vmlinuz-2.6.25.5-1.1-pae
root=/dev/disk/by-id/scsi-SATA_ST9120823ASG_5NJ0WTL5-part6
resume=/dev/sda3 splash=silent showopts vga=0x314
>     initrd /boot/initrd-2.6.25.5-1.1-pae
>
> ###Don't change this comment - YaST2 identifier: Original name:
failsafe###
> title Failsafe -- openSUSE 11.0 - 2.6.25.5-1.1
>     root (hd0,5)
>     kernel /boot/vmlinuz-2.6.25.5-1.1-pae
root=/dev/disk/by-id/scsi-SATA_ST9120823ASG_5NJ0WTL5-part6 showopts
ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off
x11failsafe vga=0x314
>     initrd /boot/initrd-2.6.25.5-1.1-pae
>
>
>   the messge " xm dmesg", from the message , it's seems that hvmdom
have not running.
>
>
> (XEN) Xen version 3.3.0_18314_02-5 (james@site) (gcc version 4.3.1
20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) )
Wed Oct  8 11:55:57 CST 2008
> (XEN) Latest ChangeSet: 18314
> (XEN) Command line: dom0_mem=1024M
> (XEN) Video information:
> (XEN)  VGA is text mode 80x25, font 8x16
> (XEN)  VBE/DDC methods: V2; EDID transfer time: 1 seconds
> (XEN) Disc information:
> (XEN)  Found 1 MBR signatures
> (XEN)  Found 1 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN)  0000000000000000 - 000000000009f000 (usable)
> (XEN)  000000000009f000 - 00000000000a0000 (reserved)
> (XEN)  0000000000100000 - 000000007f65b800 (usable)
> (XEN)  000000007f65b800 - 0000000080000000 (reserved)
> (XEN)  00000000f8000000 - 00000000fc000000 (reserved)
> (XEN)  00000000fec00000 - 00000000fec10000 (reserved)
> (XEN)  > (XEN)  00000000feda0000 - 00000000feda6000 (reserved)
> (XEN)  00000000fee00000 - 00000000fee10000 (reserved)
> (XEN)  00000000ffe00000 - 0000000100000000 (reserved)
> (XEN) System RAM: 2037MB (2086888kB)
> (XEN) ACPI: RSDP 000FBB00, 0024 (r2 DELL  )
> (XEN) ACPI: XSDT 7F65D200, 0064 (r1 DELL    M08     27D80614 ASL
 61)
> (XEN) ACPI: FACP 7F65D09C, 00F4 (r4 DELL    M08     27D80614 ASL
 61)
> (XEN) ACPI: DSDT 7F65D800, 614C (r2 INT430 SYSFexxx     1001 INTL
20050624)
> (XEN) ACPI: FACS 7F66C000, 0040
> (XEN) ACPI: HPET 7F65D300, 0038 (r1 DELL    M08            1 ASL
 61)
> (XEN) ACPI: APIC 7F65D400, 0068 (r1 DELL    M08     27D80614 ASL
 47)
> (XEN) ACPI: ASF! 7F65D000, 007E (r32 DELL    M08     27D80614 ASL
  61)
> (XEN) ACPI: MCFG 7F65D3C0, 003E (r16 DELL    M08     27D80614 ASL
  61)
> (XEN) ACPI: TCPA 7F65D700, 0032 (r1                        0 ASL
  0)
> (XEN) ACPI: SLIC 7F65D49C, 0176 (r1 DELL    M08     27D80614 ASL
 61)
> (XEN) ACPI: SSDT 7F65B9C0, 04CC (r1  PmRef    CpuPm     3000 INTL
20050624)
> (XEN) Xen heap: 9MB (9768kB)
> (XEN) Domain heap initialised
> (XEN) Processor #0 6:15 APIC version 20
> (XEN) Processor #1 6:15 APIC version 20
> (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> (XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Detected 1995.097 MHz processor.
> (XEN) HVM: VMX enabled
> (XEN) CPU0: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping
0d
> (XEN) Booting processor 1/1 eip 8c000
> (XEN) CPU1: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping
0d
> (XEN) Total of 2 processors activated.
> (XEN) ENABLING IO-APIC IRQs
> (XEN)  -> Using old ACK method
> (XEN) checking TSC synchronization across 2 CPUs: passed.
> (XEN) Platform timer is 14.318MHz HPET
> (XEN) Brought up 2 CPUs
> (XEN) I/O virtualisation disabled
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN)  Xen  kernel: 32-bit, PAE, lsb
> (XEN)  Dom0 kernel: 32-bit, PAE, lsb, paddr 0x100000 -> 0x554000
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN)  Dom0 alloc.:   000000003c000000->000000003e000000 (253952 pages
to be allocated)
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN)  Loaded kernel: c0100000->c0554000
> (XEN)  Init. ramdisk: c0554000->c0f35e00
> (XEN)  Phys-Mach map: c0f36000->c1036000
> (XEN)  Start info:    c1036000->c1036474
> (XEN)  Page tables:   c1037000->c1046000
> (XEN)  Boot stack:    c1046000->c1047000
> (XEN)  TOTAL:         c0000000->c1400000
> (XEN)  ENTRY ADDRESS: c0100000
> (XEN) Dom0 has maximum 2 VCPUs
> (XEN) Scrubbing Free RAM: ..........done.
> (XEN) Xen trace buffers: disabled
> (XEN) Std. Loglevel: Errors and warnings
> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
> (XEN) Xen is relinquishing VGA console.
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen)
> (XEN) Freed 104kB init memory
>
>
>
> what's wrong I make?
>
> best regards,
> -- James
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

<Prev in Thread] Current Thread [Next in Thread>