This simple patch adds the new Intel ICH10 chipset PCI IDs to the Xen Linux
kernel.
Signed-off-by: Don Dugger <donald.d.dugger@xxxxxxxxx>
diff -Naur linux-2.6.18-xen.hg-/arch/i386/pci/irq.c
linux-2.6.18-xen.hg/arch/i386/pci/irq.c
--- linux-2.6.18-xen.hg-/arch/i386/pci/irq.c 2008-02-11 15:09:45.000000000
-0700
+++ linux-2.6.18-xen.hg/arch/i386/pci/irq.c 2008-02-11 16:28:50.000000000
-0700
@@ -549,6 +549,10 @@
case PCI_DEVICE_ID_INTEL_ICH9_3:
case PCI_DEVICE_ID_INTEL_ICH9_4:
case PCI_DEVICE_ID_INTEL_ICH9_5:
+ case PCI_DEVICE_ID_INTEL_ICH10_0:
+ case PCI_DEVICE_ID_INTEL_ICH10_1:
+ case PCI_DEVICE_ID_INTEL_ICH10_2:
+ case PCI_DEVICE_ID_INTEL_ICH10_3:
r->name = "PIIX/ICH";
r->get = pirq_piix_get;
r->set = pirq_piix_set;
diff -Naur linux-2.6.18-xen.hg-/Documentation/i2c/busses/i2c-i801
linux-2.6.18-xen.hg/Documentation/i2c/busses/i2c-i801
--- linux-2.6.18-xen.hg-/Documentation/i2c/busses/i2c-i801 2008-02-11
15:09:18.000000000 -0700
+++ linux-2.6.18-xen.hg/Documentation/i2c/busses/i2c-i801 2008-02-11
16:29:34.000000000 -0700
@@ -10,6 +10,11 @@
* Intel 6300ESB
* Intel 82801FB/FR/FW/FRW (ICH6)
* Intel ICH7
+ * Intel 82801G (ICH7)
+ * Intel 82801H (ICH9)
+ * Intel 82801I (ICH9)
+ * Intel Tolapai
+ * Intel ICH10
Datasheets: Publicly available at the Intel website
Authors:
diff -Naur linux-2.6.18-xen.hg-/drivers/i2c/busses/i2c-i801.c
linux-2.6.18-xen.hg/drivers/i2c/busses/i2c-i801.c
--- linux-2.6.18-xen.hg-/drivers/i2c/busses/i2c-i801.c 2008-02-11
15:10:44.000000000 -0700
+++ linux-2.6.18-xen.hg/drivers/i2c/busses/i2c-i801.c 2008-02-11
16:30:35.000000000 -0700
@@ -34,6 +34,8 @@
ESB2 269B
ICH8 283E
ICH9 2930
+ ICH10 3A30
+ ICH10 3A60
This driver supports several versions of Intel's I/O Controller Hubs (ICH).
For SMBus support, they are similar to the PIIX4 and are part
of Intel's '810' and other chipsets.
@@ -459,6 +461,8 @@
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
{ 0, }
};
diff -Naur linux-2.6.18-xen.hg-/drivers/i2c/busses/Kconfig
linux-2.6.18-xen.hg/drivers/i2c/busses/Kconfig
--- linux-2.6.18-xen.hg-/drivers/i2c/busses/Kconfig 2008-02-11
15:10:44.000000000 -0700
+++ linux-2.6.18-xen.hg/drivers/i2c/busses/Kconfig 2008-02-11
16:31:11.000000000 -0700
@@ -126,6 +126,7 @@
ESB2
ICH8
ICH9
+ ICH10
This driver can also be built as a module. If so, the module
will be called i2c-i801.
diff -Naur linux-2.6.18-xen.hg-/drivers/scsi/ahci.c
linux-2.6.18-xen.hg/drivers/scsi/ahci.c
--- linux-2.6.18-xen.hg-/drivers/scsi/ahci.c 2008-02-11 15:11:27.000000000
-0700
+++ linux-2.6.18-xen.hg/drivers/scsi/ahci.c 2008-02-11 16:31:49.000000000
-0700
@@ -339,6 +339,12 @@
board_ahci }, /* ICH9 */
{ PCI_VENDOR_ID_INTEL, 0x294e, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_ahci }, /* ICH9M */
+ { PCI_VENDOR_ID_INTEL, 0x3a02, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ICH10 */
+ { PCI_VENDOR_ID_INTEL, 0x3a05, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ICH10 */
+ { PCI_VENDOR_ID_INTEL, 0x3a25, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ICH10 */
/* JMicron */
{ 0x197b, 0x2360, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
diff -Naur linux-2.6.18-xen.hg-/drivers/scsi/ata_piix.c
linux-2.6.18-xen.hg/drivers/scsi/ata_piix.c
--- linux-2.6.18-xen.hg-/drivers/scsi/ata_piix.c 2008-02-11
15:11:28.000000000 -0700
+++ linux-2.6.18-xen.hg/drivers/scsi/ata_piix.c 2008-02-11 16:36:58.000000000
-0700
@@ -126,6 +126,7 @@
ich7m_sata_ahci = 7,
ich8_sata_ahci = 8,
ich9_sata_ahci = 9,
+ ich8_2port_sata = 10,
/* constants for mapping table */
P0 = 0, /* port 0 */
@@ -193,10 +194,10 @@
{ 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7m_sata_ahci },
/* Enterprise Southbridge 2 (where's the datasheet?) */
{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
- /* SATA Controller 1 IDE (ICH8, no datasheet yet) */
+ /* SATA Controller 1 IDE (ICH8) */
{ 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
- /* SATA Controller 2 IDE (ICH8, ditto) */
- { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* SATA Controller 2 IDE (ICH8) */
+ { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* Mobile SATA Controller IDE (ICH8M, ditto) */
{ 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* SATA Controller 1 IDE (ICH9) */
@@ -211,6 +212,14 @@
{ 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_sata_ahci },
/* Mobile SATA Controller 2 IDE (ICH9M) */
{ 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_sata_ahci },
+ /* SATA Controller IDE (ICH10) */
+ { 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* SATA Controller IDE (ICH10) */
+ { 0x8086, 0x3a06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (ICH10) */
+ { 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* SATA Controller IDE (ICH10) */
+ { 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
{ } /* terminate list */
};
@@ -394,6 +403,18 @@
},
};
+static const struct piix_map_db ich8_2port_map_db = {
+ .mask = 0x3,
+ .port_enable = 0x3,
+ .map = {
+ /* PM PS SM SS MAP */
+ { P0, NA, P1, NA }, /* 00b */
+ { RV, RV, RV, RV }, /* 01b */
+ { RV, RV, RV, RV }, /* 10b */
+ { RV, RV, RV, RV },
+ },
+};
+
static const struct piix_map_db *piix_map_db_table[] = {
[ich5_sata] = &ich5_map_db,
[esb_sata] = &ich5_map_db,
@@ -403,6 +424,7 @@
[ich7m_sata_ahci] = &ich7m_map_db,
[ich8_sata_ahci] = &ich8_map_db,
[ich9_sata_ahci] = &ich9_map_db,
+ [ich8_2port_sata] = &ich8_2port_map_db,
};
static struct ata_port_info piix_port_info[] = {
@@ -526,6 +548,18 @@
.udma_mask = 0x7f, /* udma0-6 */
.port_ops = &piix_sata_ops,
},
+
+ /* ich8_2port_sata: 11: */
+ {
+ .sht = &piix_sht,
+ .host_flags = ATA_FLAG_SATA |
+ PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR |
+ PIIX_FLAG_AHCI,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &piix_pata_ops,
+ },
};
static struct pci_bits piix_enable_bits[] = {
diff -Naur linux-2.6.18-xen.hg-/include/linux/pci_ids.h
linux-2.6.18-xen.hg/include/linux/pci_ids.h
--- linux-2.6.18-xen.hg-/include/linux/pci_ids.h 2008-02-11
15:12:50.000000000 -0700
+++ linux-2.6.18-xen.hg/include/linux/pci_ids.h 2008-02-11 16:37:41.000000000
-0700
@@ -2209,6 +2209,12 @@
#define PCI_DEVICE_ID_INTEL_MCH_PC 0x3599
#define PCI_DEVICE_ID_INTEL_MCH_PC1 0x359a
#define PCI_DEVICE_ID_INTEL_E7525_MCH 0x359e
+#define PCI_DEVICE_ID_INTEL_ICH10_0 0x3a14
+#define PCI_DEVICE_ID_INTEL_ICH10_1 0x3a16
+#define PCI_DEVICE_ID_INTEL_ICH10_2 0x3a18
+#define PCI_DEVICE_ID_INTEL_ICH10_3 0x3a1a
+#define PCI_DEVICE_ID_INTEL_ICH10_4 0x3a30
+#define PCI_DEVICE_ID_INTEL_ICH10_5 0x3a60
#define PCI_DEVICE_ID_INTEL_82371SB_0 0x7000
#define PCI_DEVICE_ID_INTEL_82371SB_1 0x7010
#define PCI_DEVICE_ID_INTEL_82371SB_2 0x7020
diff -Naur linux-2.6.18-xen.hg-/sound/pci/hda/hda_intel.c
linux-2.6.18-xen.hg/sound/pci/hda/hda_intel.c
--- linux-2.6.18-xen.hg-/sound/pci/hda/hda_intel.c 2008-02-11
15:13:24.000000000 -0700
+++ linux-2.6.18-xen.hg/sound/pci/hda/hda_intel.c 2008-02-11
16:38:54.000000000 -0700
@@ -81,6 +81,7 @@
"{Intel, ESB2},"
"{Intel, ICH8},"
"{Intel, ICH9},"
+ "{Intel, ICH10},"
"{ATI, SB450},"
"{ATI, SB600},"
"{ATI, RS600},"
@@ -1637,6 +1638,8 @@
{ 0x8086, 0x284b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /*
ICH8 */
{ 0x8086, 0x293e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /*
ICH9 */
{ 0x8086, 0x293f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /*
ICH9 */
+ { 0x8086, 0x3a3e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /*
ICH10 */
+ { 0x8086, 0x3a6e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /*
ICH10 */
{ 0x1002, 0x437b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ATI }, /*
ATI SB450 */
{ 0x1002, 0x4383, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ATI }, /*
ATI SB600 */
{ 0x1002, 0x793b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ATIHDMI },
/* ATI RS600 HDMI */
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home