WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

[Xen-devel] Test results on Unisys ES7000 64x 256gb using xen-3.1.2-rc1

To: <xen-devel@xxxxxxxxxxxxxxxxxxx>
Subject: [Xen-devel] Test results on Unisys ES7000 64x 256gb using xen-3.1.2-rc1 c/s 15490 -1 new issue, 2 old issues
From: "Krysan, Susan" <KRYSANS@xxxxxxxxxx>
Date: Thu, 1 Nov 2007 05:29:08 -0500
Delivery-date: Thu, 01 Nov 2007 03:29:50 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxx
In-reply-to: <CE091CB077F4A74A9CBA33A4E4A8A3BF0B225E34@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
List-help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id: Xen developer discussion <xen-devel.lists.xensource.com>
List-post: <mailto:xen-devel@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
References: <EF8D308BE33AF54D8934DF26520252D3069BD48F@xxxxxxxxxxxxxxxxxxxxxxxxxxxx><FE7BBCFBB500984A9A7922EBC95F516E27D344@xxxxxxxxxxxxxxxxxxxxxxxxxxxx><EF8D308BE33AF54D8934DF26520252D3069BD4F8@xxxxxxxxxxxxxxxxxxxxxxxxxxxx><EF8D308BE33AF54D8934DF26520252D3069BD54A@xxxxxxxxxxxxxxxxxxxxxxxxxxxx><EF8D308BE33AF54D8934DF26520252D3069BD57A@xxxxxxxxxxxxxxxxxxxxxxxxxxxx><EF8D308BE33AF54D8934DF26520252D3069BD5BD@xxxxxxxxxxxxxxxxxxxxxxxxxxxx><CE091CB077F4A74A9CBA33A4E4A8A3BF0B225D0C@xxxxxxxxxxxxxxxxxxxxxxxxxxxx><CE091CB077F4A74A9CBA33A4E4A8A3BF0B225D66@xxxxxxxxxxxxxxxxxxxxxxxxxxxx><CE091CB077F4A74A9CBA33A4E4A8A3BF0B225DAD@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <CE091CB077F4A74A9CBA33A4E4A8A3BF0B225DED@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <CE091CB077F4A74A9CBA33A4E4A8A3BF0B225E34@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Sender: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
Thread-index: AcdJ4UYHnZd8QwLHTMSjo0sqxNkrmgE+CxDgAZa+3qABVnT68AFk5dvwAufQgQABArjgkAIyIiNQA7uSpdABgtM2EAIyrZhAAA2mOPADEjFQkAeOTDJwAbZ/6+AETqFeYAMnFGQQBBWRQcADAUxrYAH1Vh2QAxmfzJABYo/kIA==
Thread-topic: Test results on Unisys ES7000 64x 256gb using xen-3.1.2-rc1 c/s 15490 -1 new issue, 2 old issues

Host:  Unisys ES7000/one, x86_64, 64 processors, 256 gb memory

 

xen-3.1.2–rc1 changeset 15490 compiled with max_phys_cpus=64 and booted with dom0_mem=2048M and numa=on

 

OLD ISSUES:

 

  • Bug #1037 - Shutdown of large domains takes a long time, during which time dom0 is not interruptible (due to the synchronous tearing down of the memory map) – for example, shutdown of 180gb domu causes 5 min 15 sec dom0 unresponsiveness 
  • Bug #940 - Must specify hpet=disable kernel parameter to get 32-bit SLES10 domVTs to boot; narrowed down to c/s 14436 but the patch originator cannot recreate on his hardware

 

NEW ISSUE:

  • Xm-test gets this failure, but we had never run it with 256GB memory before so it may not be a regression:

11_create_concurrent_pos failed with:

Error: (12, 'Cannot allocate memory')

So increased dom0_mem parameter to 4096M, rebooted, and reran but get the same problem; will test today with less host memory to see if still fails

 

TESTS include running xm-test and also attempting to boot and run programs in the following domUs and domVTs (running domains #s 3 through 10 simultaneously):

 

1.       32-processor 64-bit SLES10 domU with 248gb memory – run kernbench

2.       32-processor 64-bit SLES10 domVT with 248gb memory – run kernbench

3.       32-processor 64-bit SLES10 domU with 64gb memory - run kernbench

4.       32-processor 64-bit SLES10 domVT with 64gb memory – run kernbench

5.       8-processor 32-bit SLES10 domU with 4gb memory – run kernbench

6.       8-processor 32-bit SLES10 domVT with 4gb memory (booted with hpet=disable) - run kernbench

7.       8-processor 32-bit PAE SLES10 domVT with 16gb memory (booted with hpet=disable) - run kernbench

8.       8-processor 64-bit Windows 2003 Enterprise Edition domVT with 16gb memory – booted but could not log in because OS needs to be activated

9.       2-processor 32-bit Windows XP domVT with 4gb memory – run 100% cpu intensive program

10.   1-processor 32-bit Windows 2003 Server domVT with 4gb memory – run 100% cpu intensive program

 

RESULTS:

 

All tests were successful, except for the 2 old issues above.

 

Xm-test timing summary:

  Run Started : Wed, 31 Oct 2007 17:03:45 -0400

  Run Stoped  : Wed, 31 Oct 2007 17:53:49 -0400

Xm-test execution summary:

  PASS:  109

  FAIL:  3

  XPASS: 1

  XFAIL: 2

 

Details:

 

 FAIL: 11_create_concurrent_pos

         [34] Failed to create domain

 

XFAIL: 02_network_local_ping_pos

         ping loopback failed for size 65507. ping eth0 failed for size 65507.

 

XFAIL: 11_network_domU_ping_pos

         Ping failed for size 65507.

 

 

 

Thanks,

Sue Krysan

Linux Systems Group

Unisys Corporation

 

 

 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel