> we have the problem that our xen configuration settings are not correctly
> evaluated when creating a xen guests.
Congratulations - I think you just won my "weird problem of the week"
award ;-)
> When creating domains with "xm create domainname" the system sometimes has
> all configuration parameters out of the config files, but sometimes not. We
> did some tests and saw that the parameters are only certainly used if we
> specify them via the commandline like "xm create domainname
> parameter=value,...".
Now that's ... really strange.
What version of Xen is this? Did you build it from source, or was it
packaged? What distro is this?
Are you using any Xend managed domains or are you doing everything by config
files?
> If the parameters are only specified in the configuration files in
> /etc/xen/ they are parsed and used "sometimes". Another fact we found is
> that if the "xm create" is called by a script the error occurs very often
> ~70% of the testcases, while calling the command from a ssh shell manually
> only fails in ~10% of the testcases. We stripped down the script and it
> does nothing but calling "xm create" and the normal shell where it works
> mostly has no .profile/.bashrc/... that change the environment.
Good troubleshooting. And good analysis...
Are you 100% sure that you don't have another copy of your domain config file
somewhere on the system (e.g. maybe a backup) that might have different
values in? Is it possible you're running the commands from different
directories in each case?
xm will use a config file in ./ if it's there, or it can search /etc/xen. I'm
not sure what the order of precedence is but I'm thinking it might be
sometimes using one copy and sometimes the other?
Another way to test: try specifying the full path, e.g "xm
create /etc/xen/lnudb1". Does this behave consistently?
> Additionally there is some persistent behavior - if it failed once it will
> fail until the host is rebooted (maybe some config parts are stored and not
> re-evaluated). I checked xenstore with the script from
> http://wiki.xensource.com/xenwiki/XenStore and saw that xenstore only has
> the parameters if a good-case guest is running.
That's strange too...
> An interesting fact is that it does not fail initializing memory or pci
> passthrough in host or guest - somehow it fails the initial config parsing.
> You can see below that already the output of XendDomainInfo.create in the
> log is different in good/bad case.
>
> Because of the unstable behavior I expect some kind of race condition while
> parsing from the files.
This seems very odd. Although it sounds buggy, it seems to me that others
would have noticed it if it was common. Therefore, it suggests that there's
something perculiar to your local system which is provoking this behaviour.
Let us know what you find out, and maybe we can crank through this!
Cheers,
mark
> The command "xm create lnudb1 pci=04:01.0 memory=2048" works always
> successful. A "xm create lnudb1" creates only *sometimes* a system with a
> pci adapter and 2 GB memory. Looking in the /var/log/xend.log reveals a
> different XendDomainInfo.create statement for good and bad case.
>
> (I added the >>> <<< signs to point to the important statement)
>
> XendDomainInfo.create(['vm', ['name', 'lnudb1'], ['memory', 2048],
> ['vcpus', 1], ['on_xend_start', 'ignore'], ['on_xend_stop', 'ignore'],
> ['image', ['linux', ['kernel', '/etc/xen/vmlinuz-xen'], ['ramdisk',
> '/etc/xen/initrd-xen'], ['root', '/dev/xvda1'], ['args', 'TERM=xterm
> selinux=off xencons=tty']]], ['device', ['vbd', ['uname', 'phy:sde5'],
> ['dev', 'xvda1'], ['mode', 'w']]], ['device', ['vbd', ['uname',
> 'phy:/dev/hda'], ['dev', 'hdc:cdrom'], ['mode', 'r']]],
>
> >>> ['device', ['pci', ['dev', ['domain', '0x0'], ['bus', '0x04'], ['slot',
> >>> '0x01'], ['func', '0x0']]]], <<<
>
> ['device', ['vif', ['bridge', 'xenbr0'], ['mac', '00:16:3e:00:00:10']]],
> ['device', ['vif', ['bridge', 'xenbr1'], ['mac', '00:16:3e:00:00:31']]],
> ['device', ['vkbd']], ['device', ['vfb', ['vncunused', '1'], ['type',
> 'vnc'], ['display', 'localhost:10.0'], ['xauthority',
> '/root/.Xauthority']]]])
>
>
> The xm create with the profile described above produces following statement
> XendDomainInfo.create(['vm', ['name', 'lnudb1'], ['memory', 1024],
> ['vcpus', 1], ['on_xend_start', 'ignore'], ['on_xend_stop', 'ignore'],
> ['image', ['linux', ['kernel', '/etc/xen/vmlinuz-xen'], ['ramdisk',
> '/etc/xen/initrd-xen'], ['root', '/dev/xvda1'], ['args', 'TERM=xterm
> selinux=off xencons=tty']]], ['device', ['vbd', ['uname', 'phy:sde5'],
> ['dev', 'xvda1'], ['mode', 'w']]], ['device', ['vbd', ['uname',
> 'phy:/dev/hda'], ['dev', 'hdc:cdrom'], ['mode', 'r']]],
>
> >>> <<<<
>
> ['device', ['vif', ['bridge', 'xenbr0'], ['mac', '00:16:3e:00:00:10']]],
> ['device', ['vif', ['bridge', 'xenbr1'], ['mac', '00:16:3e:00:00:31']]],
> ['device', ['vkbd']], ['device', ['vfb', ['vncunused', '1'], ['type',
> 'vnc'], ['display', 'localhost:10.0'], ['xauthority',
> '/root/.Xauthority']]]])
>
> Also note the different values for the memory statement
>
> System Description
> Hardware IBM x3950, 4 Intel Xeon CPUs (dual core) 3.5GHz, 23Gb memory.
> The operating system is Linux SLES10 SP1, with the following rpms:
> o xen-kmp-smp-3.1.0_2.6.16.46_0.12-0.1
> o xen-libs-32bit-3.0.4_13138-0.40
> o xen-doc-pdf-3.1.0-0.1
> o kernel-xen-2.6.16.46-0.12
> o xen-3.1.0-0.1
> o xen-tools-3.1.0-0.1
> o xen-doc-html-3.1.0-0.1
> o xen-libs-3.1.0-0.1
> o xen-tools-ioemu-3.1.0-0.1
>
> the kernel is booted with the parameters
> pciback.hide=(04:01.0)(04:01.1)(06:01.0)(06:01.1)(08:01.0)(08:01.1)
> and /etc/modprobe.conf constains the statements
> install lpfc /sbin/modprobe pciback ; /sbin/modprobe --first-time
> --ignore-install lpfc options pciback
> hide=(04:01.0)(04:01.1)(06:01.0)(06:01.1)(08:01.0)(08:01.1) to hide the pci
> adapters for the Dom0.
>
> The xen profile used is:
> builder='linux'
> memory = 2048
> name = "lnudb1"
> vcpus = 1
> vif = [ 'mac=00:16:3e:00:00:10, bridge=xenbr0', 'mac=00:16:3e:00:00:31,
> bridge=xenbr1' ] disk = [ 'phy:sde5,xvda1,w', 'phy:/dev/hda,hdc:cdrom,r' ]
> root = "/dev/xvda1"
> extra = "TERM=xterm selinux=off xencons=tty"
> vfb=[ "type=vnc,vncunused=1" ]
> pci= [ '0000:04:01.0' ]
>
> The critical parameters are memory and pci, we never saw the issue with
> e.g. vif's.
>
> P.S. It was hard to decide between xen-devel and xen-users by topic for
> that mail. Eventually I coose xen-devel becasue I'm already member of this
> list and thereby get also responses that may lack a cc to me. Please
> redirect if needed.
--
Dave: Just a question. What use is a unicyle with no seat? And no pedals!
Mark: To answer a question with a question: What use is a skateboard?
Dave: Skateboards have wheels.
Mark: My wheel has a wheel!
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home