WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

[Xen-devel] bonding + VLANs -> Oops/panic, no VLAN on 100 Mbit cards [SO

To: xen-users@xxxxxxxxxxxxxxxxxxx, xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-devel] bonding + VLANs -> Oops/panic, no VLAN on 100 Mbit cards [SOLVED]
From: Tomasz Chmielewski <mangoo@xxxxxxxx>
Date: Thu, 24 May 2007 15:23:44 +0200
Cc: "Angel L. Mateo" <amateo@xxxxx>, Sébastien CRAMATTE <s.cramatte@xxxxxxxxxx>, Timo Benk <timo.benk@xxxxxx>, amartins@xxxxxxxxxxx, Javier Guerra <javier@xxxxxxxxxxx>, Eli Criffield <elicriffield@xxxxxxxxx>, kfh.xen@xxxxxx, Daniele Palumbo <daniele@xxxxxxxxxxxx>
Delivery-date: Thu, 24 May 2007 06:22:11 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id: Xen developer discussion <xen-devel.lists.xensource.com>
List-post: <mailto:xen-devel@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.0.8) Gecko/20061110 Mandriva/1.5.0.8-1mdv2007.1 (2007.1) Thunderbird/1.5.0.8 Mnenhy/0.7.4.666
As the issue concerns both the -user (configuration) and -devel (OOPS), I'm sending this message to both lists.

Some time ago I complained about two problems:

- VLANs are not working on machines with 100 Mbit cards
- I get a kernel Oops (sometimes panic) when I try to use bonding and VLANs with Xen


The root of the issue is the same in both cases: VLAN interfaces must *not* be brought up before we start our Xen network scripts.


So have four cases with Xen:

1. Bonding + VLAN leads to an Oops
2. Bonding + VLAN works

3. VLANs don't work with 100 Mbit cards
4. VLANs work with 100 Mbit cards

I use network-bridge script shipped with Xen 3.1.


1. Bonding + VLAN leads to an Oops:

ifup bond0
ifup bond0.100
ifup bond0.200

./network-bridge start vifnum=0 netdev=bond0 bridge=xenbr0

./network-bridge start vifnum=1 netdev=bond0.100 bridge=xenbr100
# Ooops (and/or panic) here!

./network-bridge start vifnum=2 netdev=bond0.200 bridge=xenbr200


2. Bonding + VLAN works - note the "enslave":

ifup bond0
./network-bridge start vifnum=0 netdev=bond0 bridge=xenbr0

ifenslave pbond0 eth0 eth1

ifup bond0.100
ifup bond0.200

./network-bridge start vifnum=1 netdev=bond0.100 bridge=xenbr100

./network-bridge start vifnum=2 netdev=bond0.200 bridge=xenbr200


3. VLANs don't work with 100 Mbit cards (with 1 Gbit will work):

ifup eth0
ifup eth0.100
ifup eth0.200

./network-bridge start vifnum=0 netdev=eth0 bridge=xenbr0

./network-bridge start vifnum=1 netdev=eth0.100 bridge=xenbr100

./network-bridge start vifnum=2 netdev=eth0.200 bridge=xenbr200


4. VLANs work with 100 Mbit cards

ifup eth0

./network-bridge start vifnum=0 netdev=eth0 bridge=xenbr0

ifup eth0.100
ifup eth0.200

./network-bridge start vifnum=1 netdev=eth0.100 bridge=xenbr100

./network-bridge start vifnum=2 netdev=eth0.200 bridge=xenbr200



One more note: to use it in startup scripts, I had to put a couple of "sleep" commands between each line - otherwise, some peth/pbond interfaces were missing sometimes.

--
Tomasz Chmielewski
http://wpkg.org

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

<Prev in Thread] Current Thread [Next in Thread>
  • [Xen-devel] bonding + VLANs -> Oops/panic, no VLAN on 100 Mbit cards [SOLVED], Tomasz Chmielewski <=